main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs sn65lbc176dr: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
viewers sn65lbc176dr: viewers · Ray
package.json sn65lbc176dr: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding) · Ray
page.json sn65lbc176dr: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding) · Ray
README.md Initial commit: component/sn65lbc176dr · Ray
sn65lbc176dr-etched.fit.json sn65lbc176dr: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
sn65lbc176dr-etched.glb sn65lbc176dr: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
sn65lbc176dr-etched.step sn65lbc176dr: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
sn65lbc176dr.glb Publish 0.1.0 · Ray
sn65lbc176dr.kicad_mod Publish 0.1.0 · Ray
sn65lbc176dr.kicad_sym Publish 0.1.0 · Ray
sn65lbc176dr.lbr Publish 0.1.0 · Ray
sn65lbc176dr.step Publish 0.1.0 · Ray

SN65LBC176DR

Texas Instruments · RS-485 / RS-422 ICs · SOIC-8

SN65LBC176DR from Texas Instruments, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 R output Receiver logic output; high when differential input (A - B) ≥ 0.2 V, low when ≤ -0.2 V, with 50 mV typical hysteresis.
2 RE input Receiver enable input; active low (receiver enabled when RE is low, disabled to high impedance when RE is high).
3 DE input Driver enable input; active high (driver enabled when DE is high, outputs disabled to high impedance when DE is low).
4 D input Differential driver data input; high level (≥ 2 V) drives A high and B low, low level (≤ 0.8 V) drives A low and B high.
5 GND power_in Ground reference (0 V).
6 A bidirectional Non-inverting RS485 differential bus pin with common-mode voltage range of -7 V to +12 V.
7 B bidirectional Inverting RS485 differential bus pin with common-mode voltage range of -7 V to +12 V.
8 VCC power_in 5 V power supply pin with recommended operating range 4.75 V to 5.25 V.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package SOIC-8
Category Interface
Pins 8

CAD (KiCad official)

  • Symbol: SN65LBC176DR
  • Footprint: Package_SO:SOIC-8_3.9x4.9mm_P1.27mm
  • 3D model: SOIC-8 (KiCad packages3D, STEP)
  • 3D model files: sn65lbc176dr-etched.step / sn65lbc176dr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); sn65lbc176dr.step / sn65lbc176dr.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (29 pp, sha256 a708c623b041ca86, retrieved 2026-09-23, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.2, primary claude-haiku-4-5-20251001 (text), consensus claude-sonnet-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF