← Commit history
README.md+64−64@@ -2,20 +2,20 @@ **HGSEMI** · RS-485 / RS-422 ICs · MSOP-8 -SN65HVD78EIMM from HGSEMI, in a MSOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.+SN65HVD78EIMM from HGSEMI, in a MSOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD. ## Pinout | Pin | Name | Type | Function | |---|---|---|---|-| 1 | RO | output | Receiver output: with RE low, RO is high when (A - B) is not less than 200 mV and low when (A - B) is not greater than -200 mV, as printed on the datasheet pin table. |-| 2 | RE | input | Receiver output enable: RO is active when RE is low and high-impedance when RE is high, and RE high together with DE low puts the device into low-power shutdown; pin uses hot-plug input structure. |-| 3 | DE | input | Driver output enable: driver outputs are active when DE is high and high-impedance when DE is low, and DE low with RE high enters low-power shutdown; pin uses hot-plug input structure. |-| 4 | DI | input | Driver input: with DE high, a low on DI drives A low and B high, and a high on DI drives A high and B low. |+| 1 | RO | output | Receiver output: with RE low, RO goes high when (A - B) is not less than 200mV and goes low when (A - B) is not greater than -200mV, and RO is high-impedance when RE is high. |+| 2 | RE | input | Receiver output enable, active low: RO is enabled when RE is low and high-impedance when RE is high, and RE high together with DE low puts the device into low-power shutdown; this pin uses the hot-plug input structure. |+| 3 | DE | input | Driver output enable: the driver output is enabled when DE is high and high-impedance when DE is low, and DE low with RE high enters low-power shutdown; this pin uses the hot-plug input structure. |+| 4 | DI | input | Driver input: when DE is high, a low on DI drives output A low and output B high, and a high on DI drives A high and B low. | | 5 | GND | power_in | Ground reference for the device. |-| 6 | A | bidirectional | Receiver non-inverting input and driver non-inverting output on the RS-485 bus. |-| 7 | B | bidirectional | Receiver inverting input and driver inverting output on the RS-485 bus. |-| 8 | VCC | power_in | Positive supply: 3.15 V ≤ VCC ≤ 3.45 V; a 0.1 µF capacitor to ground is to be connected. |+| 6 | A | bidirectional | Non-inverting receiver input and non-inverting driver output on the RS-485 bus. |+| 7 | B | bidirectional | Inverting receiver input and inverting driver output on the RS-485 bus. |+| 8 | VCC | power_in | Positive supply: 3.15 V ≤ VCC ≤ 3.45 V, with a 0.1 µF capacitor to ground recommended. | ## Key specifications @@ -32,66 +32,66 @@ Limits as printed in the datasheet (page.json `metadata.characteristics` carries | Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page | |---|---|---|---|---|---|---|---|-| Supply voltage | VCC | | | 6 | V | | 4 |+| Supply voltage (absolute maximum) | VCC | | | 6 | V | | 4 | | Control input voltage (RE, DE) | RE, DE | -0.3 | | 6 | V | | 4 |-| Driver input voltage | DI | -0.3 | | 6 | V | | 4 |-| Driver output voltage | A,B | -7 | | 12 | V | | 4 |-| Receiver input voltage | A,B | -7 | | 12 | V | | 4 |-| Receiver output voltage | RO | -0.3 | | | V | | 4 |-| Storage temperature | | -65 | | 150 | ℃ | | 4 |-| Lead temperature (soldering) | TLEAD | | | 260 | ℃ | soldering 10 s | 4 |-| Supply voltage | VCC | 3.15 | | 3.45 | V | | 4 |-| Operating temperature range (industrial, EI) | | -40 | | 85 | ℃ | SN65HVDxxEI | 4 |-| Differential driver output voltage | VOD | 2 | | | V | Figure 1, RL=100Ω (RS-422) | 4 |-| Differential driver output voltage | VOD | 1.5 | | | V | Figure 1, RL=54Ω (RS-485) | 4 |+| Driver input voltage (DI) | DI | -0.3 | | 6 | V | | 4 |+| Driver output voltage (A, B) | A, B | -7 | | 12 | V | | 4 |+| Receiver input voltage (A, B) | A, B | -7 | | 12 | V | | 4 |+| Receiver output voltage (RO) | RO | -0.3 | | | V | | 4 |+| Operating temperature range | | -40 | | 85 | °C | SN65HVDxxEI (industrial grade) | 4 |+| Storage temperature | | -65 | | 150 | °C | | 4 |+| Lead temperature (soldering) | TLEAD | | | 260 | °C | soldering 10 s | 4 |+| Supply voltage (recommended) | VCC | 3.15 | | 3.45 | V | | 4 |+| Differential driver output voltage (RS-422 load) | VOD | 2 | | | V | Figure 1, RL=100Ω (RS-422) | 4 |+| Differential driver output voltage (RS-485 load) | VOD | 1.5 | | | V | Figure 1, RL=54Ω (RS-485) | 4 | | Differential driver output voltage magnitude change | ΔVOD | | | 0.2 | V | Figure 1, RL=100Ω or RL=54Ω | 4 | | Driver common-mode output voltage | VOC | | | 3 | V | Figure 1, RL=100Ω or RL=54Ω | 4 |-| Common-mode voltage magnitude change | ΔVOC | | | 0.2 | V | Figure 1, RL=100Ω or RL=54Ω | 4 |-| Input high voltage | VIH | 2 | | | V | DE, DI, RE | 5 |+| Common-mode output voltage magnitude change | ΔVOC | | | 0.2 | V | Figure 1, RL=100Ω or RL=54Ω | 4 |+| Input high voltage | VIH | 2 | | | V | DE, DI, [pin name missing in source] | 5 | | Input low voltage | VIL | | | 0.8 | V | DE, DI | 5 |-| Input current | IIN | -1 | | 1 | μA | DE, DI, RE | 5 |-| Input current (A,B), full duplex | IA, IB | | | 125 | μA | DE=GND, VCC=GND 或 VCC, VIN=12V | 5 |-| Input current (A,B), full duplex | IA, IB | -75 | | | μA | DE=GND, VCC=GND 或 VCC, VIN=-7V | 5 |-| Output leakage current (Y,Z), full duplex | IO | | | 125 | μA | DE=GND, VCC=GND 或 VCC, VIN=12V | 5 |-| Output leakage current (Y,Z), full duplex | IO | -100 | | | μA | DE=GND, VCC=GND 或 VCC, VIN=-7V | 5 |-| Driver short-circuit output current | IOSD | | | 250 | mA | 0≦VOUT≦12V | 5 |-| Driver short-circuit output current | IOSD | -250 | | | mA | -7≦VOUT≦Vcc | 5 |-| Driver short-circuit foldback output current | IOSDF | | | 20 | mA | Vcc-1V≦VOUT≦Vcc+0.5V | 5 |-| Driver short-circuit foldback output current | IOSDF | -20 | | | mA | -0.5V≦VOUT≦+1V | 5 |-| Receiver differential threshold voltage | VTH | -200 | -125 | -50 | mV | -7V≦VCM≦12V | 5 |+| Input current | IIN | -1 | | 1 | μA | DE, DI, [pin name missing in source] | 5 |+| Input current (A, B) full duplex | IA, IB | | | 125 | μA | DE=GND, VCC=GND or VCC, VIN=12V | 5 |+| Input current (A, B) full duplex | IA, IB | -75 | | | μA | DE=GND, VCC=GND or VCC, VIN=-7V | 5 |+| Output leakage current (Y, Z) full duplex | IO | | | 125 | μA | DE=GND, VCC=GND or VCC, VIN=12V | 5 |+| Output leakage current (Y, Z) full duplex | IO | -100 | | | μA | DE=GND, VCC=GND or VCC, VIN=-7V | 5 |+| Driver short-circuit output current | IOSD | | | 250 | mA | 0≤VOUT≤12V | 5 |+| Driver short-circuit output current | IOSD | -250 | | | mA | -7≤VOUT≤VCC | 5 |+| Driver short-circuit foldback output current | IOSDF | | | 20 | mA | VCC-1V≤VOUT≤VCC+0.5V | 5 |+| Driver short-circuit foldback output current | IOSDF | -20 | | | mA | -0.5V≤VOUT≤+1V | 5 |+| Receiver differential threshold voltage | VTH | -200 | -125 | -50 | mV | -7V≤VCM≤12V | 5 | | Receiver output low voltage | VOL | | | 0.4 | V | IO=4mA, VID=-200mV | 5 |-| Receiver three-state output current | IOZR | -1 | | 1 | μA | 0≦VO≦VCC | 5 |-| Receiver output short-circuit current | IOSR | -7 | | 7 | mA | 0V≦VRO≦VCC | 5 |-| Receiver output short-circuit current | IOSR | -95 | | 95 | mA | 0V≦VRO≦VCC | 5 |-| Supply current (RE=VCC, DE=VCC) | Icc | | 400 | 900 | μA | No load, RE=VCC, DI=GND or VCC, DE=VCC | 6 |-| Supply current (RE=VCC, DE=GND) | Icc | | 330 | 600 | μA | No load, RE=VCC, DI=GND or VCC, DE=GND | 6 |-| Supply current (RE=GND, DE=VCC) | Icc | | 400 | 1000 | μA | No load, RE=GND, DI=GND or VCC, DE=VCC | 6 |-| Supply current (RE=GND, DE=GND) | Icc | | 330 | 800 | μA | No load, RE=GND, DI=GND or VCC, DE=GND | 6 |-| Standby mode supply current | ISHDN | | 0.05 | 10 | μA | DE=GND, RE=VCC | 6 |-| ESD IEC61000-4-2 contact discharge, RS-485 pins (A,B), half duplex | | -16 | | 16 | kV | IEC 61000-4-2 contact discharge, half duplex | 6 |-| ESD HBM, pin to GND | | -16 | | 16 | kV | HBM, pin to GND | 6 |-| Driver propagation delay (low to high) | tDPLH | | | 50 | ns | Figure 2 and 5, RL=54Ω, CL=50pF | 9 |-| Driver propagation delay (high to low) | tDPHL | | | 50 | ns | Figure 2 and 5, RL=54Ω, CL=50pF | 9 |-| Driver output skew | tDSKEW | | | 10 | ns | Figure 2 and 5, RL=54Ω, CL=50pF | 9 |-| Driver rise or fall time | tDR, tDF | | | 20 | ns | Figure 2 and 5, RL=54Ω, CL=50pF | 9 |-| Maximum data rate (driver) | fMAX | | | 16 | Mbps | | 9 |-| Driver enable to output high | tDZH | | | 150 | ns | Figure 3 and 6, CL=100pF, S3 closed | 9 |-| Driver enable to output low | tDZL | | | 150 | ns | Figure 3 and 6, CL=100pF, S2 closed | 9 |-| Driver low to disable time | tDLZ | | | 100 | ns | Figure 3 and 6, CL=15pF, S2 closed | 9 |-| Driver high to disable time | tDHZ | | | 100 | ns | Figure 3 and 6, CL=15pF, S3 closed | 9 |-| Driver enable to output high from standby | tDZH(SHDN) | | | 2200 | ns | Figure 3 and 6, CL=15pF, S3 closed | 9 |-| Driver enable to output low from standby | tDZL(SHDN) | | | 2200 | ns | Figure 3 and 6, CL=15pF, S2 closed | 9 |-| Driver standby time | tSHDN | 50 | 350 | 700 | ns | Note 4 | 9 |-| Receiver propagation delay | tRPLH, tRPHL | | | 50 | ns | Figure 7 and 8, CL=15pF, /VID/≥2.0V, VID≤15ns | 9 |-| Receiver output skew | tRSKEW | | | 20 | ns | Figure 7 and 8, CL=15pF, /VID/≥2.0V, VID≤15ns | 9 |-| Maximum data rate (receiver) | fMAX | | | 16 | Mbps | | 9 |-| Receiver enable to output low | tRZL | | | 50 | ns | Figure 4 and 9, S1=-1.5V, S2 to VCC | 9 |-| Receiver enable to output high | tRZH | | | 50 | ns | Figure 4 and 9, S1=+1.5V, S2 to GND | 9 |-| Receiver low to disable time | tRLZ | | | 50 | ns | Figure 4 and 9, S1=-1.5V, S2 to VCC | 9 |-| Receiver high to disable time | tRHZ | | | 50 | ns | Figure 4 and 9, S1=+1.5V, S2 to GND | 9 |-| Receiver enable to output high from standby | tRZH(SHDN) | | | 2200 | ns | Figure 4 and 9, S1=-1.5V, S2 to VCC | 9 |-| Receiver enable to output low from standby | tRZL(SHDN) | | | 2200 | ns | Figure 4 and 9, S1=+1.5V, S2 to GND | 9 |-| Receiver standby time | tSHDN | 50 | 350 | 700 | ns | Note 4 | 9 |+| Receiver tri-state output current | IOZR | -1 | | 1 | μA | 0≤VO≤VCC | 5 |+| Receiver output short-circuit current | IOSR | -7 | | 95 | mA | 0V≤VRO≤VCC | 5 |+| Supply current (driver enabled, DE=VCC) | Icc | | 400 | 900 | μA | No load, [pin name missing in source]=VCC, DI=GND or VCC, DE=VCC | 6 |+| Supply current (driver disabled, DE=GND) | Icc | | 330 | 600 | μA | No load, [pin name missing in source]=VCC, DI=GND or VCC, DE=GND | 6 |+| Supply current (driver enabled, pin=GND) | Icc | | 400 | 1000 | μA | No load, [pin name missing in source]=GND, DI=GND or VCC, DE=VCC | 6 |+| Supply current (driver disabled, pin=GND) | Icc | | 330 | 800 | μA | No load, [pin name missing in source]=GND, DI=GND or VCC, DE=GND | 6 |+| Standby supply current | ISHDN | | 0.05 | 10 | μA | DE=GND, [pin name missing in source]=VCC | 6 |+| ESD IEC 61000-4-2 air-gap discharge (A, B) | | -16 | | 16 | kV | RS-485 pins A and B | 6 |+| ESD IEC 61000-4-2 contact discharge (A, B) | | -16 | | 16 | kV | Half duplex, RS-485 pins A and B | 6 |+| ESD human body model (pin to GND) | | -16 | | 16 | kV | Pin to GND | 6 |+| Driver differential output skew | tDSKEW | | | 10 | ns | Figure 2 and 5, RL=54Ω, CL=50pF | 9 |+| Driver standby time | tSHDN | 50 | 350 | 700 | ns | | 9 |+| Receiver differential output skew | tRSKEW | | | 20 | ns | Figure 7 and 8, CL=15pF, /VID/≥2.0V, VID≤15ns | 9 |+| Receiver standby time | tSHDN | 50 | 350 | 700 | ns | | 9 |+| Input hysteresis (DE, DI) | VHYS | | 100 | | mV | DE, DI, [pin name missing in source] | 5 |+| Thermal shutdown temperature | TTS | | 165 | | °C | | 5 |+| Receiver input resistance | RIN | | 96 | | kΩ | -7V≤VCM≤12V | 5 |+| Driver propagation delay | tDPLH, tDPHL | | 50 | | ns | Figure 2 and 5, RL=54Ω, CL=50pF | 9 |+| Driver rise and fall time | tDR, tDF | | 20 | | ns | Figure 2 and 5, RL=54Ω, CL=50pF | 9 |+| Driver enable to output high | tDZH | | 150 | | ns | Figure 3 and 6, CL=100pF, S3 closed | 9 |+| Driver enable to output low | tDZL | | 150 | | ns | Figure 3 and 6, CL=100pF, S2 closed | 9 |+| Driver output low to disable | tDLZ | | 100 | | ns | Figure 3 and 6, CL=15pF, S2 closed | 9 |+| Driver output high to disable | tDHZ | | 100 | | ns | Figure 3 and 6, CL=15pF, S3 closed | 9 |+| Driver enable from standby to output high | tDZH(SHDN) | | 2200 | | ns | Figure 3 and 6, CL=15pF, S3 closed | 9 |+| Driver enable from standby to output low | tDZL(SHDN) | | 2200 | | ns | Figure 3 and 6, CL=15pF, S2 closed | 9 |+| Receiver propagation delay | tRPLH, tRPHL | | 50 | | ns | Figure 7 and 8, CL=15pF, /VID/≥2.0V, VID≤15ns | 9 |+| Receiver enable to output low | tRZL | | 50 | | ns | Figure 4 and 9, S1=-1.5V, S2 to VCC | 9 |+| Receiver enable to output high | tRZH | | 50 | | ns | Figure 4 and 9, S1=+1.5V, S2 to GND | 9 |+| Receiver output low to disable | tRLZ | | 50 | | ns | Figure 4 and 9, S1=-1.5V, S2 to VCC | 9 |+| Receiver output high to disable | tRHZ | | 50 | | ns | Figure 4 and 9, S1=+1.5V, S2 to GND | 9 |+| Receiver enable from standby to output high | tRZH(SHDN) | | 2200 | | ns | Figure 4 and 9, S1=-1.5V, S2 to VCC | 9 |+| Receiver enable from standby to output low | tRZL(SHDN) | | 2200 | | ns | Figure 4 and 9, S1=+1.5V, S2 to GND | 9 | ## CAD (KiCad official) @@ -104,7 +104,7 @@ Limits as printed in the datasheet (page.json `metadata.characteristics` carries Data extracted from the manufacturer datasheet, not a distributor listing: -- **Datasheet:** [HGSEMI datasheet](docs/sn65hvd78eimm-datasheet.pdf) (20 pp, sha256 `81ed86cf3caebd1f`, retrieved 2026-11-12, tier: lcsc)+- **Datasheet:** [HGSEMI datasheet](docs/sn65hvd78eimm-datasheet.pdf) (20 pp, sha256 `81ed86cf3caebd1f`, retrieved 2026-11-13, tier: lcsc) - **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original. - **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - **CAD:** KiCad official libraries (CC-BY-SA 4.0).
package.json+17−18@@ -1,6 +1,6 @@ { "slug": "sn65hvd78eimm",- "version": "0.1.1",+ "version": "0.1.2", "type": "component", "description": "HGSEMI RS-485 / RS-422 ICs, MSOP-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.", "tags": [@@ -28,8 +28,7 @@ "viewers/symbol.html", "viewers/footprint.html", "sn65hvd78eimm-hero.glb",- "sn65hvd78eimm-hero.overlay.json",- "sn65hvd78eimm-etched.glb"+ "sn65hvd78eimm-hero.overlay.json" ], "component": { "mpn": "SN65HVD78EIMM",@@ -43,7 +42,7 @@ "symbol": "sn65hvd78eimm.kicad_sym", "footprint": "sn65hvd78eimm.kicad_mod", "model_3d": "sn65hvd78eimm-hero.glb",- "model_3d_plain": "sn65hvd78eimm-etched.glb",+ "model_3d_plain": "sn65hvd78eimm.glb", "model_3d_step": "sn65hvd78eimm-etched.step", "model_3d_step_plain": "sn65hvd78eimm.step", "lbr": "sn65hvd78eimm.lbr"@@ -52,7 +51,7 @@ "lcsc": "C7432166" }, "distributor_check": {- "checked_at": "2026-11-12T07:56:49Z",+ "checked_at": "2026-11-13T01:10:16Z", "source": "Component Ocean /api/assign-pns", "digikey": { "pn": null,@@ -68,25 +67,25 @@ "number": "1", "name": "RO", "type": "output",- "description": "Receiver output: with RE low, RO is high when (A - B) is not less than 200 mV and low when (A - B) is not greater than -200 mV, as printed on the datasheet pin table."+ "description": "Receiver output: with RE low, RO goes high when (A - B) is not less than 200mV and goes low when (A - B) is not greater than -200mV, and RO is high-impedance when RE is high." }, { "number": "2", "name": "RE", "type": "input",- "description": "Receiver output enable: RO is active when RE is low and high-impedance when RE is high, and RE high together with DE low puts the device into low-power shutdown; pin uses hot-plug input structure."+ "description": "Receiver output enable, active low: RO is enabled when RE is low and high-impedance when RE is high, and RE high together with DE low puts the device into low-power shutdown; this pin uses the hot-plug input structure." }, { "number": "3", "name": "DE", "type": "input",- "description": "Driver output enable: driver outputs are active when DE is high and high-impedance when DE is low, and DE low with RE high enters low-power shutdown; pin uses hot-plug input structure."+ "description": "Driver output enable: the driver output is enabled when DE is high and high-impedance when DE is low, and DE low with RE high enters low-power shutdown; this pin uses the hot-plug input structure." }, { "number": "4", "name": "DI", "type": "input",- "description": "Driver input: with DE high, a low on DI drives A low and B high, and a high on DI drives A high and B low."+ "description": "Driver input: when DE is high, a low on DI drives output A low and output B high, and a high on DI drives A high and B low." }, { "number": "5",@@ -98,19 +97,19 @@ "number": "6", "name": "A", "type": "bidirectional",- "description": "Receiver non-inverting input and driver non-inverting output on the RS-485 bus."+ "description": "Non-inverting receiver input and non-inverting driver output on the RS-485 bus." }, { "number": "7", "name": "B", "type": "bidirectional",- "description": "Receiver inverting input and driver inverting output on the RS-485 bus."+ "description": "Inverting receiver input and inverting driver output on the RS-485 bus." }, { "number": "8", "name": "VCC", "type": "power_in",- "description": "Positive supply: 3.15 V ≤ VCC ≤ 3.45 V; a 0.1 µF capacitor to ground is to be connected."+ "description": "Positive supply: 3.15 V ≤ VCC ≤ 3.45 V, with a 0.1 µF capacitor to ground recommended." } ], "provenance": {@@ -124,11 +123,11 @@ "consensus": "agreed", "guards": "pin_guards 0.1: passed", "guard_notes": [- "extractor flagged: Overbar markings on RO and RE are garbled in the text extraction; RE is inferred from the enable des; The requested MPN is SN65HVD78EIMM (no /TR suffix). The ordering table lists SN65HVD78EIMM/TR in MSO"+ "extractor flagged: The overbar on the RE pin name (and the bar on the RO-enable symbol) was lost in text extraction; th; The RO description gives receiver thresholds of +200mV / -200mV, which conflicts with the failsafe s; The MPN SN65HVD78EIMM is listed in the ordering table as SN65HVD78EIMM/TR in MSOP-8 (marking D78EI, " ], "pages_sent": 20,- "cost_usd": 0.072,- "at": "2026-11-12T07:56:07"+ "cost_usd": 0.0715,+ "at": "2026-11-13T01:10:02" }, "datasheet": { "url": "https://datasheet.lcsc.com/datasheet/pdf/8f3507a1448a659367ba0d77fa1d96d6.pdf",@@ -165,7 +164,7 @@ "centre_offset_mm": 0.0, "footprint_binding": "identity", "sha256": "847c4c5023fe1603fbd36900a5dcc4bd3901ba473f71d42c9a469f0236eaadf3",- "checked": "2026-11-12",+ "checked": "2026-11-13", "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)" }, {@@ -183,8 +182,8 @@ "zmin_mm": -0.0, "centre_offset_mm": 0.0, "footprint_binding": "identity",- "sha256": "5e9dedd319f5810548303484fd9a26155c8c9cab7432959efc55beef357c9b84",- "checked": "2026-11-12",+ "sha256": "4436a78e583301e6655e3fc7b6316002e1da139e118a58921d7050cd24500a0c",+ "checked": "2026-11-13", "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)" } ],
page.json+20−19@@ -4,7 +4,7 @@ "slug": "sn65hvd78eimm", "title": "SN65HVD78EIMM", "brief": "HGSEMI RS-485 / RS-422 ICs, MSOP-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",- "version": "0.1.1",+ "version": "0.1.2", "license": "CC-BY-SA-4.0", "tags": [ "component",@@ -25,7 +25,7 @@ "symbol": "sn65hvd78eimm.kicad_sym", "footprint": "sn65hvd78eimm.kicad_mod", "model_3d": "sn65hvd78eimm-hero.glb",- "model_3d_plain": "sn65hvd78eimm-etched.glb",+ "model_3d_plain": "sn65hvd78eimm.glb", "model_3d_step": "sn65hvd78eimm-etched.step", "model_3d_step_plain": "sn65hvd78eimm.step", "lbr": "sn65hvd78eimm.lbr"@@ -34,7 +34,7 @@ "lcsc": "C7432166" }, "distributor_check": {- "checked_at": "2026-11-12T07:56:49Z",+ "checked_at": "2026-11-13T01:10:16Z", "source": "Component Ocean /api/assign-pns", "digikey": { "pn": null,@@ -50,25 +50,25 @@ "number": "1", "name": "RO", "type": "output",- "description": "Receiver output: with RE low, RO is high when (A - B) is not less than 200 mV and low when (A - B) is not greater than -200 mV, as printed on the datasheet pin table."+ "description": "Receiver output: with RE low, RO goes high when (A - B) is not less than 200mV and goes low when (A - B) is not greater than -200mV, and RO is high-impedance when RE is high." }, { "number": "2", "name": "RE", "type": "input",- "description": "Receiver output enable: RO is active when RE is low and high-impedance when RE is high, and RE high together with DE low puts the device into low-power shutdown; pin uses hot-plug input structure."+ "description": "Receiver output enable, active low: RO is enabled when RE is low and high-impedance when RE is high, and RE high together with DE low puts the device into low-power shutdown; this pin uses the hot-plug input structure." }, { "number": "3", "name": "DE", "type": "input",- "description": "Driver output enable: driver outputs are active when DE is high and high-impedance when DE is low, and DE low with RE high enters low-power shutdown; pin uses hot-plug input structure."+ "description": "Driver output enable: the driver output is enabled when DE is high and high-impedance when DE is low, and DE low with RE high enters low-power shutdown; this pin uses the hot-plug input structure." }, { "number": "4", "name": "DI", "type": "input",- "description": "Driver input: with DE high, a low on DI drives A low and B high, and a high on DI drives A high and B low."+ "description": "Driver input: when DE is high, a low on DI drives output A low and output B high, and a high on DI drives A high and B low." }, { "number": "5",@@ -80,19 +80,19 @@ "number": "6", "name": "A", "type": "bidirectional",- "description": "Receiver non-inverting input and driver non-inverting output on the RS-485 bus."+ "description": "Non-inverting receiver input and non-inverting driver output on the RS-485 bus." }, { "number": "7", "name": "B", "type": "bidirectional",- "description": "Receiver inverting input and driver inverting output on the RS-485 bus."+ "description": "Inverting receiver input and inverting driver output on the RS-485 bus." }, { "number": "8", "name": "VCC", "type": "power_in",- "description": "Positive supply: 3.15 V ≤ VCC ≤ 3.45 V; a 0.1 µF capacitor to ground is to be connected."+ "description": "Positive supply: 3.15 V ≤ VCC ≤ 3.45 V, with a 0.1 µF capacitor to ground recommended." } ], "provenance": {@@ -106,11 +106,11 @@ "consensus": "agreed", "guards": "pin_guards 0.1: passed", "guard_notes": [- "extractor flagged: Overbar markings on RO and RE are garbled in the text extraction; RE is inferred from the enable des; The requested MPN is SN65HVD78EIMM (no /TR suffix). The ordering table lists SN65HVD78EIMM/TR in MSO"+ "extractor flagged: The overbar on the RE pin name (and the bar on the RO-enable symbol) was lost in text extraction; th; The RO description gives receiver thresholds of +200mV / -200mV, which conflicts with the failsafe s; The MPN SN65HVD78EIMM is listed in the ordering table as SN65HVD78EIMM/TR in MSOP-8 (marking D78EI, " ], "pages_sent": 20,- "cost_usd": 0.072,- "at": "2026-11-12T07:56:07"+ "cost_usd": 0.0715,+ "at": "2026-11-13T01:10:02" }, "datasheet": { "url": "https://datasheet.lcsc.com/datasheet/pdf/8f3507a1448a659367ba0d77fa1d96d6.pdf",@@ -147,7 +147,7 @@ "centre_offset_mm": 0, "footprint_binding": "identity", "sha256": "847c4c5023fe1603fbd36900a5dcc4bd3901ba473f71d42c9a469f0236eaadf3",- "checked": "2026-11-12",+ "checked": "2026-11-13", "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)" }, {@@ -165,8 +165,8 @@ "zmin_mm": 0, "centre_offset_mm": 0, "footprint_binding": "identity",- "sha256": "5e9dedd319f5810548303484fd9a26155c8c9cab7432959efc55beef357c9b84",- "checked": "2026-11-12",+ "sha256": "4436a78e583301e6655e3fc7b6316002e1da139e118a58921d7050cd24500a0c",+ "checked": "2026-11-13", "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)" } ],@@ -988,10 +988,11 @@ "viewers/symbol.html", "viewers/footprint.html", "sn65hvd78eimm-hero.glb",- "sn65hvd78eimm-hero.overlay.json",- "sn65hvd78eimm-etched.glb"+ "sn65hvd78eimm-hero.overlay.json" ], "visibility": { "public": true- }+ },+ "description": "HGSEMI RS-485 / RS-422 ICs, MSOP-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",+ "org": "adom" }