← Commit history

Publish 0.1.1

Ray ·d548d05450 · ·parent 108774a
4 files changed +358−347
README.md+64−60
@@ -8,14 +8,14 @@ SN65HVD78EIMM from HGSEMI, in a MSOP-8. Pinout and pin descriptions extracted fr  | Pin | Name | Type | Function | |---|---|---|---|-| 1 | RO | output | Receiver output: when RE is low, RO is high if (A-B) >= -50mV and low if (A-B) <= -200mV; RO is high impedance when RE is high. |-| 2 | RE | input | Receiver output enable, active low: RO is enabled when RE is low and high impedance when RE is high; RE high with DE low enters low-power shutdown, and RE uses a hot-swap input structure. |-| 3 | DE | input | Driver output enable: driver outputs are active when DE is high and high impedance when DE is low; DE low with RE high enters low-power shutdown, and DE uses a hot-swap input structure. |-| 4 | DI | input | Driver input: with DE high, a low on DI forces A low and B high, and a high on DI forces A high and B low. |-| 5 | GND | power_in | Ground. |-| 6 | A | bidirectional | Non-inverting receiver input and non-inverting driver output. |-| 7 | B | bidirectional | Inverting receiver input and inverting driver output. |-| 8 | VCC | power_in | Positive supply, 3.15V <= VCC <= 3.45V, bypass to ground with a 0.1µF capacitor. |+| 1 | RO | output | Receiver output: with RE low, RO is high when (A - B) is not less than 200 mV and low when (A - B) is not greater than -200 mV, as printed on the datasheet pin table. |+| 2 | RE | input | Receiver output enable: RO is active when RE is low and high-impedance when RE is high, and RE high together with DE low puts the device into low-power shutdown; pin uses hot-plug input structure. |+| 3 | DE | input | Driver output enable: driver outputs are active when DE is high and high-impedance when DE is low, and DE low with RE high enters low-power shutdown; pin uses hot-plug input structure. |+| 4 | DI | input | Driver input: with DE high, a low on DI drives A low and B high, and a high on DI drives A high and B low. |+| 5 | GND | power_in | Ground reference for the device. |+| 6 | A | bidirectional | Receiver non-inverting input and driver non-inverting output on the RS-485 bus. |+| 7 | B | bidirectional | Receiver inverting input and driver inverting output on the RS-485 bus. |+| 8 | VCC | power_in | Positive supply: 3.15 V ≤ VCC ≤ 3.45 V; a 0.1 µF capacitor to ground is to be connected. |  ## Key specifications @@ -32,62 +32,66 @@ Limits as printed in the datasheet (page.json `metadata.characteristics` carries  | Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page | |---|---|---|---|---|---|---|---|+| Supply voltage | VCC |  |  | 6 | V |  | 4 |+| Control input voltage (RE, DE) | RE, DE | -0.3 |  | 6 | V |  | 4 |+| Driver input voltage | DI | -0.3 |  | 6 | V |  | 4 |+| Driver output voltage | A,B | -7 |  | 12 | V |  | 4 |+| Receiver input voltage | A,B | -7 |  | 12 | V |  | 4 |+| Receiver output voltage | RO | -0.3 |  |  | V |  | 4 |+| Storage temperature |  | -65 |  | 150 | ℃ |  | 4 |+| Lead temperature (soldering) | TLEAD |  |  | 260 | ℃ | soldering 10 s | 4 | | Supply voltage | VCC | 3.15 |  | 3.45 | V |  | 4 |-| Differential driver output | VOD | 2 |  |  | V | Fig 1, RL=100Ω (RS-422) | 4 |-| Differential driver output | VOD | 1.5 |  |  | V | Fig 1, RL=54Ω (RS-485) | 4 |-| Change in magnitude of VOD | ΔVOD |  |  | 0.2 | V | Fig 1, RL=100Ω or RL=54Ω | 4 |-| Driver common-mode output voltage | VOC |  |  | 3 | V | Fig 1, RL=100Ω or RL=54Ω | 4 |-| Change in magnitude of VOC | ΔVOC |  |  | 0.2 | V | Fig 1, RL=100Ω or RL=54Ω | 4 |+| Operating temperature range (industrial, EI) |  | -40 |  | 85 | ℃ | SN65HVDxxEI | 4 |+| Differential driver output voltage | VOD | 2 |  |  | V | Figure 1, RL=100Ω (RS-422) | 4 |+| Differential driver output voltage | VOD | 1.5 |  |  | V | Figure 1, RL=54Ω (RS-485) | 4 |+| Differential driver output voltage magnitude change | ΔVOD |  |  | 0.2 | V | Figure 1, RL=100Ω or RL=54Ω | 4 |+| Driver common-mode output voltage | VOC |  |  | 3 | V | Figure 1, RL=100Ω or RL=54Ω | 4 |+| Common-mode voltage magnitude change | ΔVOC |  |  | 0.2 | V | Figure 1, RL=100Ω or RL=54Ω | 4 | | Input high voltage | VIH | 2 |  |  | V | DE, DI, RE | 5 | | Input low voltage | VIL |  |  | 0.8 | V | DE, DI | 5 |-| Input hysteresis | VHYS |  | 100 |  | mV | DE, DI, RE | 5 | | Input current | IIN | -1 |  | 1 | μA | DE, DI, RE | 5 |-| Driver short-circuit output current | IOSD |  |  | 250 | mA | 0≤VOUT≤12V | 5 |-| Driver short-circuit output current | IOSD | -250 |  |  | mA | -7≤VOUT≤Vcc | 5 |-| Driver short-circuit foldback output current | IOSDF |  |  | 20 | mA | Vcc-1V≤VOUT≤Vcc+0.5V | 5 |-| Driver short-circuit foldback output current | IOSDF | -20 |  |  | mA | -0.5V≤VOUT≤+1V | 5 |-| Thermal shutdown temperature | TTS |  | 165 |  | ℃ |  | 5 |-| Thermal shutdown hysteresis | TTSH |  | 15 |  | ℃ |  | 5 |-| Receiver differential threshold voltage | VTH | -200 | -125 | -50 | mV | -7V≤VCM≤12V | 5 |-| Receiver input hysteresis | ΔVTH |  | 15 |  | mV | VA+VB=0 | 5 |+| Input current (A,B), full duplex | IA, IB |  |  | 125 | μA | DE=GND, VCC=GND 或 VCC, VIN=12V | 5 |+| Input current (A,B), full duplex | IA, IB | -75 |  |  | μA | DE=GND, VCC=GND 或 VCC, VIN=-7V | 5 |+| Output leakage current (Y,Z), full duplex | IO |  |  | 125 | μA | DE=GND, VCC=GND 或 VCC, VIN=12V | 5 |+| Output leakage current (Y,Z), full duplex | IO | -100 |  |  | μA | DE=GND, VCC=GND 或 VCC, VIN=-7V | 5 |+| Driver short-circuit output current | IOSD |  |  | 250 | mA | 0≦VOUT≦12V | 5 |+| Driver short-circuit output current | IOSD | -250 |  |  | mA | -7≦VOUT≦Vcc | 5 |+| Driver short-circuit foldback output current | IOSDF |  |  | 20 | mA | Vcc-1V≦VOUT≦Vcc+0.5V | 5 |+| Driver short-circuit foldback output current | IOSDF | -20 |  |  | mA | -0.5V≦VOUT≦+1V | 5 |+| Receiver differential threshold voltage | VTH | -200 | -125 | -50 | mV | -7V≦VCM≦12V | 5 | | Receiver output low voltage | VOL |  |  | 0.4 | V | IO=4mA, VID=-200mV | 5 |-| Receiver three-state output current | IOZR | -1 |  | 1 | μA | 0≤VO≤VCC | 5 |-| Receiver input resistance | RIN | 96 |  |  | kΩ | -7V≤VCM≤12V | 5 |-| Supply current | Icc |  | 400 | 900 | μA | No load, RE=VCC, DI=GND or VCC, DE=VCC | 6 |-| Supply current | Icc |  | 330 | 600 | μA | No load, RE=VCC, DI=GND or VCC, DE=GND | 6 |-| Supply current | Icc |  | 400 | 1000 | μA | No load, RE=GND, DI=GND or VCC, DE=VCC | 6 |-| Supply current | Icc |  | 330 | 800 | μA | No load, RE=GND, DI=GND or VCC, DE=GND | 6 |-| Supply current in shutdown mode | ISHDN |  | 0.05 | 10 | μA | DE=GND, RE=VCC | 6 |-| Driver propagation delay | tDPLH |  |  | 50 | ns | Fig 2 and 5, RL=54Ω, CL=50pF | 9 |-| Driver output skew /tDPLH-tDPHL/ | tDSKEW |  |  | 10 | ns | Fig 2 and 5, RL=54Ω, CL=50pF | 9 |-| Driver rise or fall time | tDR, tDF |  |  | 20 | ns | Fig 2 and 5, RL=54Ω, CL=50pF | 9 |-| Maximum data rate (driver) | fMAX | 16 |  |  | Mbps |  | 9 |-| Driver enable to output high | tDZH |  |  | 150 | ns | Fig 3 and 6, CL=100pF, S3 closed | 9 |-| Driver enable to output low | tDZL |  |  | 150 | ns | Fig 3 and 6, CL=100pF, S2 closed | 9 |-| Driver disable time from low | tDLZ |  |  | 100 | ns | Fig 3 and 6, CL=15pF, S2 closed | 9 |-| Driver disable time from high | tDHZ |  |  | 100 | ns | Fig 3 and 6, CL=15pF, S3 closed | 9 |-| Driver enable from shutdown to output high | tDZH(SHDN) |  |  | 2200 | ns | Fig 3 and 6, CL=15pF, S3 closed | 9 |-| Driver enable from shutdown to output low | tDZL(SHDN) |  |  | 2200 | ns | Fig 3 and 6, CL=15pF, S2 closed | 9 |-| Time to shutdown (driver) | tSHDN | 50 | 350 | 700 | ns |  | 9 |-| Receiver propagation delay | tRPLH, tRPHL |  |  | 50 | ns | Fig 7 and 8, CL=15pF, /VID/≥2.0V, VID≤15ns | 9 |-| Receiver skew /tDPLH-tDPHL/ | tRSKEW |  |  | 20 | ns | Fig 7 and 8, CL=15pF, /VID/≥2.0V, VID≤15ns | 9 |-| Maximum data rate (receiver) | fMAX | 16 |  |  | Mbps |  | 9 |-| Receiver enable to output low | tRZL |  |  | 50 | ns | Fig 4 and 9, S1=-1.5V, S2 to VCC | 9 |-| Receiver enable to output high | tRZH |  |  | 50 | ns | Fig 4 and 9, S1=+1.5V, S2 to GND | 9 |-| Receiver disable time from low | tRLZ |  |  | 50 | ns | Fig 4 and 9, S1=-1.5V, S2 to VCC | 9 |-| Receiver disable time from high | tRHZ |  |  | 50 | ns | Fig 4 and 9, S1=+1.5V, S2 to GND | 9 |-| Receiver enable from shutdown to output high | tRZH(SHDN) |  |  | 2200 | ns | Fig 4 and 9, S1=-1.5V, S2 to VCC | 9 |-| Receiver enable from shutdown to output low | tRZL(SHDN) |  |  | 2200 | ns | Fig 4 and 9, S1=+1.5V, S2 to GND | 9 |-| Time to shutdown (receiver) | tSHDN | 50 | 350 | 700 | ns |  | 9 |-| Supply voltage | VCC |  |  | 6 | V |  | 4 |-| Control input voltage | RE, DE | -0.3 |  | 6 | V |  | 4 |-| Driver input voltage | DI | -0.3 |  | 6 | V |  | 4 |-| Driver output voltage | A, B | -7 |  | 12 | V |  | 4 |-| Receiver input voltage | A, B | -7 |  | 12 | V |  | 4 |-| Receiver output voltage | RO | -0.3 |  |  | V | -0.3 to (VCC+0.3) | 4 |-| Operating temperature range |  | -40 |  | 85 | ℃ | SN65HVDxxEI | 4 |-| Storage temperature |  | -65 |  | 150 | ℃ |  | 4 |-| Lead temperature | TLEAD |  |  | 260 | ℃ | soldering 10s | 4 |+| Receiver three-state output current | IOZR | -1 |  | 1 | μA | 0≦VO≦VCC | 5 |+| Receiver output short-circuit current | IOSR | -7 |  | 7 | mA | 0V≦VRO≦VCC | 5 |+| Receiver output short-circuit current | IOSR | -95 |  | 95 | mA | 0V≦VRO≦VCC | 5 |+| Supply current (RE=VCC, DE=VCC) | Icc |  | 400 | 900 | μA | No load, RE=VCC, DI=GND or VCC, DE=VCC | 6 |+| Supply current (RE=VCC, DE=GND) | Icc |  | 330 | 600 | μA | No load, RE=VCC, DI=GND or VCC, DE=GND | 6 |+| Supply current (RE=GND, DE=VCC) | Icc |  | 400 | 1000 | μA | No load, RE=GND, DI=GND or VCC, DE=VCC | 6 |+| Supply current (RE=GND, DE=GND) | Icc |  | 330 | 800 | μA | No load, RE=GND, DI=GND or VCC, DE=GND | 6 |+| Standby mode supply current | ISHDN |  | 0.05 | 10 | μA | DE=GND, RE=VCC | 6 |+| ESD IEC61000-4-2 contact discharge, RS-485 pins (A,B), half duplex |  | -16 |  | 16 | kV | IEC 61000-4-2 contact discharge, half duplex | 6 |+| ESD HBM, pin to GND |  | -16 |  | 16 | kV | HBM, pin to GND | 6 |+| Driver propagation delay (low to high) | tDPLH |  |  | 50 | ns | Figure 2 and 5, RL=54Ω, CL=50pF | 9 |+| Driver propagation delay (high to low) | tDPHL |  |  | 50 | ns | Figure 2 and 5, RL=54Ω, CL=50pF | 9 |+| Driver output skew | tDSKEW |  |  | 10 | ns | Figure 2 and 5, RL=54Ω, CL=50pF | 9 |+| Driver rise or fall time | tDR, tDF |  |  | 20 | ns | Figure 2 and 5, RL=54Ω, CL=50pF | 9 |+| Maximum data rate (driver) | fMAX |  |  | 16 | Mbps |  | 9 |+| Driver enable to output high | tDZH |  |  | 150 | ns | Figure 3 and 6, CL=100pF, S3 closed | 9 |+| Driver enable to output low | tDZL |  |  | 150 | ns | Figure 3 and 6, CL=100pF, S2 closed | 9 |+| Driver low to disable time | tDLZ |  |  | 100 | ns | Figure 3 and 6, CL=15pF, S2 closed | 9 |+| Driver high to disable time | tDHZ |  |  | 100 | ns | Figure 3 and 6, CL=15pF, S3 closed | 9 |+| Driver enable to output high from standby | tDZH(SHDN) |  |  | 2200 | ns | Figure 3 and 6, CL=15pF, S3 closed | 9 |+| Driver enable to output low from standby | tDZL(SHDN) |  |  | 2200 | ns | Figure 3 and 6, CL=15pF, S2 closed | 9 |+| Driver standby time | tSHDN | 50 | 350 | 700 | ns | Note 4 | 9 |+| Receiver propagation delay | tRPLH, tRPHL |  |  | 50 | ns | Figure 7 and 8, CL=15pF, /VID/≥2.0V, VID≤15ns | 9 |+| Receiver output skew | tRSKEW |  |  | 20 | ns | Figure 7 and 8, CL=15pF, /VID/≥2.0V, VID≤15ns | 9 |+| Maximum data rate (receiver) | fMAX |  |  | 16 | Mbps |  | 9 |+| Receiver enable to output low | tRZL |  |  | 50 | ns | Figure 4 and 9, S1=-1.5V, S2 to VCC | 9 |+| Receiver enable to output high | tRZH |  |  | 50 | ns | Figure 4 and 9, S1=+1.5V, S2 to GND | 9 |+| Receiver low to disable time | tRLZ |  |  | 50 | ns | Figure 4 and 9, S1=-1.5V, S2 to VCC | 9 |+| Receiver high to disable time | tRHZ |  |  | 50 | ns | Figure 4 and 9, S1=+1.5V, S2 to GND | 9 |+| Receiver enable to output high from standby | tRZH(SHDN) |  |  | 2200 | ns | Figure 4 and 9, S1=-1.5V, S2 to VCC | 9 |+| Receiver enable to output low from standby | tRZL(SHDN) |  |  | 2200 | ns | Figure 4 and 9, S1=+1.5V, S2 to GND | 9 |+| Receiver standby time | tSHDN | 50 | 350 | 700 | ns | Note 4 | 9 |  ## CAD (KiCad official) @@ -102,7 +106,7 @@ Data extracted from the manufacturer datasheet, not a distributor listing:  - **Datasheet:** [HGSEMI datasheet](docs/sn65hvd78eimm-datasheet.pdf) (20 pp, sha256 `81ed86cf3caebd1f`, retrieved 2026-11-12, tier: lcsc) - **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.-- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-sonnet-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - **CAD:** KiCad official libraries (CC-BY-SA 4.0).  [Datasheet PDF](docs/sn65hvd78eimm-datasheet.pdf)
package.json+15−15
@@ -1,6 +1,6 @@ {   "slug": "sn65hvd78eimm",-  "version": "0.1.0",+  "version": "0.1.1",   "type": "component",   "description": "HGSEMI RS-485 / RS-422 ICs, MSOP-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",   "tags": [@@ -52,7 +52,7 @@       "lcsc": "C7432166"     },     "distributor_check": {-      "checked_at": "2026-11-12T04:57:02Z",+      "checked_at": "2026-11-12T07:56:49Z",       "source": "Component Ocean /api/assign-pns",       "digikey": {         "pn": null,@@ -68,49 +68,49 @@         "number": "1",         "name": "RO",         "type": "output",-        "description": "Receiver output: when RE is low, RO is high if (A-B) >= -50mV and low if (A-B) <= -200mV; RO is high impedance when RE is high."+        "description": "Receiver output: with RE low, RO is high when (A - B) is not less than 200 mV and low when (A - B) is not greater than -200 mV, as printed on the datasheet pin table."       },       {         "number": "2",         "name": "RE",         "type": "input",-        "description": "Receiver output enable, active low: RO is enabled when RE is low and high impedance when RE is high; RE high with DE low enters low-power shutdown, and RE uses a hot-swap input structure."+        "description": "Receiver output enable: RO is active when RE is low and high-impedance when RE is high, and RE high together with DE low puts the device into low-power shutdown; pin uses hot-plug input structure."       },       {         "number": "3",         "name": "DE",         "type": "input",-        "description": "Driver output enable: driver outputs are active when DE is high and high impedance when DE is low; DE low with RE high enters low-power shutdown, and DE uses a hot-swap input structure."+        "description": "Driver output enable: driver outputs are active when DE is high and high-impedance when DE is low, and DE low with RE high enters low-power shutdown; pin uses hot-plug input structure."       },       {         "number": "4",         "name": "DI",         "type": "input",-        "description": "Driver input: with DE high, a low on DI forces A low and B high, and a high on DI forces A high and B low."+        "description": "Driver input: with DE high, a low on DI drives A low and B high, and a high on DI drives A high and B low."       },       {         "number": "5",         "name": "GND",         "type": "power_in",-        "description": "Ground."+        "description": "Ground reference for the device."       },       {         "number": "6",         "name": "A",         "type": "bidirectional",-        "description": "Non-inverting receiver input and non-inverting driver output."+        "description": "Receiver non-inverting input and driver non-inverting output on the RS-485 bus."       },       {         "number": "7",         "name": "B",         "type": "bidirectional",-        "description": "Inverting receiver input and inverting driver output."+        "description": "Receiver inverting input and driver inverting output on the RS-485 bus."       },       {         "number": "8",         "name": "VCC",         "type": "power_in",-        "description": "Positive supply, 3.15V <= VCC <= 3.45V, bypass to ground with a 0.1µF capacitor."+        "description": "Positive supply: 3.15 V ≤ VCC ≤ 3.45 V; a 0.1 µF capacitor to ground is to be connected."       }     ],     "provenance": {@@ -118,17 +118,17 @@       "factory_chain": {         "factory": "2.0.0",         "extractor": "extract_pins 0.3",-        "primary_model": "claude-sonnet-5-5",+        "primary_model": "claude-haiku-5-5",         "primary_mode": "text",         "consensus_model": "claude-sonnet-5-5",         "consensus": "agreed",         "guards": "pin_guards 0.1: passed",         "guard_notes": [-          "extractor flagged: The pin table text lost the overbar on RE (it appears as garbled characters). I inferred pin 2 is RE; Pin numbering is from the DIP-8/SOP-8/MSOP-8 pin table. The pin diagram is an image and was not in t; The ordering table lists the MSOP-8 part as SN65HVD78EIMM/TR (marking D78EI). The requested MPN has "+          "extractor flagged: Overbar markings on RO and RE are garbled in the text extraction; RE is inferred from the enable des; The requested MPN is SN65HVD78EIMM (no /TR suffix). The ordering table lists SN65HVD78EIMM/TR in MSO"         ],         "pages_sent": 20,-        "cost_usd": 0.1339,-        "at": "2026-11-12T04:56:46"+        "cost_usd": 0.072,+        "at": "2026-11-12T07:56:07"       },       "datasheet": {         "url": "https://datasheet.lcsc.com/datasheet/pdf/8f3507a1448a659367ba0d77fa1d96d6.pdf",@@ -183,7 +183,7 @@         "zmin_mm": -0.0,         "centre_offset_mm": 0.0,         "footprint_binding": "identity",-        "sha256": "898cb7b25d5347df36ca516b4de9f201cfdabd1673ff9664ece72740d04a765a",+        "sha256": "5e9dedd319f5810548303484fd9a26155c8c9cab7432959efc55beef357c9b84",         "checked": "2026-11-12",         "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"       }
page.json+18−16
@@ -4,7 +4,7 @@   "slug": "sn65hvd78eimm",   "title": "SN65HVD78EIMM",   "brief": "HGSEMI RS-485 / RS-422 ICs, MSOP-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",-  "version": "0.1.0",+  "version": "0.1.1",   "license": "CC-BY-SA-4.0",   "tags": [     "component",@@ -34,7 +34,7 @@       "lcsc": "C7432166"     },     "distributor_check": {-      "checked_at": "2026-11-12T04:57:02Z",+      "checked_at": "2026-11-12T07:56:49Z",       "source": "Component Ocean /api/assign-pns",       "digikey": {         "pn": null,@@ -50,49 +50,49 @@         "number": "1",         "name": "RO",         "type": "output",-        "description": "Receiver output: when RE is low, RO is high if (A-B) >= -50mV and low if (A-B) <= -200mV; RO is high impedance when RE is high."+        "description": "Receiver output: with RE low, RO is high when (A - B) is not less than 200 mV and low when (A - B) is not greater than -200 mV, as printed on the datasheet pin table."       },       {         "number": "2",         "name": "RE",         "type": "input",-        "description": "Receiver output enable, active low: RO is enabled when RE is low and high impedance when RE is high; RE high with DE low enters low-power shutdown, and RE uses a hot-swap input structure."+        "description": "Receiver output enable: RO is active when RE is low and high-impedance when RE is high, and RE high together with DE low puts the device into low-power shutdown; pin uses hot-plug input structure."       },       {         "number": "3",         "name": "DE",         "type": "input",-        "description": "Driver output enable: driver outputs are active when DE is high and high impedance when DE is low; DE low with RE high enters low-power shutdown, and DE uses a hot-swap input structure."+        "description": "Driver output enable: driver outputs are active when DE is high and high-impedance when DE is low, and DE low with RE high enters low-power shutdown; pin uses hot-plug input structure."       },       {         "number": "4",         "name": "DI",         "type": "input",-        "description": "Driver input: with DE high, a low on DI forces A low and B high, and a high on DI forces A high and B low."+        "description": "Driver input: with DE high, a low on DI drives A low and B high, and a high on DI drives A high and B low."       },       {         "number": "5",         "name": "GND",         "type": "power_in",-        "description": "Ground."+        "description": "Ground reference for the device."       },       {         "number": "6",         "name": "A",         "type": "bidirectional",-        "description": "Non-inverting receiver input and non-inverting driver output."+        "description": "Receiver non-inverting input and driver non-inverting output on the RS-485 bus."       },       {         "number": "7",         "name": "B",         "type": "bidirectional",-        "description": "Inverting receiver input and inverting driver output."+        "description": "Receiver inverting input and driver inverting output on the RS-485 bus."       },       {         "number": "8",         "name": "VCC",         "type": "power_in",-        "description": "Positive supply, 3.15V <= VCC <= 3.45V, bypass to ground with a 0.1µF capacitor."+        "description": "Positive supply: 3.15 V ≤ VCC ≤ 3.45 V; a 0.1 µF capacitor to ground is to be connected."       }     ],     "provenance": {@@ -100,17 +100,17 @@       "factory_chain": {         "factory": "2.0.0",         "extractor": "extract_pins 0.3",-        "primary_model": "claude-sonnet-5-5",+        "primary_model": "claude-haiku-5-5",         "primary_mode": "text",         "consensus_model": "claude-sonnet-5-5",         "consensus": "agreed",         "guards": "pin_guards 0.1: passed",         "guard_notes": [-          "extractor flagged: The pin table text lost the overbar on RE (it appears as garbled characters). I inferred pin 2 is RE; Pin numbering is from the DIP-8/SOP-8/MSOP-8 pin table. The pin diagram is an image and was not in t; The ordering table lists the MSOP-8 part as SN65HVD78EIMM/TR (marking D78EI). The requested MPN has "+          "extractor flagged: Overbar markings on RO and RE are garbled in the text extraction; RE is inferred from the enable des; The requested MPN is SN65HVD78EIMM (no /TR suffix). The ordering table lists SN65HVD78EIMM/TR in MSO"         ],         "pages_sent": 20,-        "cost_usd": 0.1339,-        "at": "2026-11-12T04:56:46"+        "cost_usd": 0.072,+        "at": "2026-11-12T07:56:07"       },       "datasheet": {         "url": "https://datasheet.lcsc.com/datasheet/pdf/8f3507a1448a659367ba0d77fa1d96d6.pdf",@@ -165,7 +165,7 @@         "zmin_mm": 0,         "centre_offset_mm": 0,         "footprint_binding": "identity",-        "sha256": "898cb7b25d5347df36ca516b4de9f201cfdabd1673ff9664ece72740d04a765a",+        "sha256": "5e9dedd319f5810548303484fd9a26155c8c9cab7432959efc55beef357c9b84",         "checked": "2026-11-12",         "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"       }@@ -945,5 +945,7 @@   ],   "visibility": {     "public": true-  }+  },+  "description": "HGSEMI RS-485 / RS-422 ICs, MSOP-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",+  "org": "adom" }\ No newline at end of file
sn65hvd78eimm-hero.overlay.json+261−256
@@ -1,260 +1,265 @@ {-  "spec": "adom-hero 1.4",-  "mpn": "SN65HVD78EIMM",-  "kind": "component + footprint reference art",-  "board_use": false,-  "plane_z_mm": -0.02,-  "units": "metre",-  "upAxis": "Z",-  "layers": {-    "pad_outlines": {-      "material": "Footprint pads - teal dashed outlines - 50 percent opacity",-      "rgba": [-        0.0,-        0.902,-        0.863,-        0.5-      ],-      "pads": 8,-      "span_mm": 5.85,-      "dash_mm": 0.1462,-      "gap_mm": 0.0878,-      "pad_stroke_mm": 0.0351-    },-    "silkscreen": {-      "material": "Silkscreen reference lines - 30 percent opacity",-      "rgba": [-        0.92,-        0.96,-        1.0,-        0.3-      ],-      "footprint_items": 7,-      "pin1": {-        "source": "footprint silkscreen",-        "pad": "1"-      }-    },-    "signal_names": {-      "material": "Signal names - 50 percent opacity",-      "rgba": [-        0.92,-        0.96,-        1.0,-        0.5-      ],-      "font": "DejaVu Sans Mono",-      "labels": 8,-      "sides": "top + mirrored underside (single-sided)",-      "fallback_to_pad_number": 0-    }+ "spec": "adom-hero 1.4",+ "mpn": "SN65HVD78EIMM",+ "kind": "component + footprint reference art",+ "board_use": false,+ "plane_z_mm": -0.02,+ "units": "metre",+ "upAxis": "Z",+ "layers": {+  "pad_outlines": {+   "material": "Footprint pads - teal dashed outlines - 50 percent opacity",+   "rgba": [+    0.0,+    0.902,+    0.863,+    0.5+   ],+   "pads": 8,+   "span_mm": 5.85,+   "dash_mm": 0.1462,+   "gap_mm": 0.0877,+   "pad_stroke_mm": 0.0351   },-  "align": {-    "ok": true,-    "centre_offset_mm": 0.0,-    "tolerance_mm": 0.468,-    "orientation_flipped": false,-    "contacts_bbox_mm": [-      -2.45,-      2.45,-      -1.125,-      1.125-    ],-    "pads_bbox_mm": [-      -2.925,-      2.925,-      -1.175,-      1.175-    ],-    "seating_z_mm": 0.0+  "silkscreen": {+   "material": "Silkscreen reference lines - 30 percent opacity",+   "rgba": [+    0.92,+    0.96,+    1.0,+    0.3+   ],+   "footprint_items": 7,+   "pin1": {+    "source": "footprint silkscreen",+    "pad": "1"+   }   },-  "sources": {-    "glb": "sn65hvd78eimm-etched.glb",-    "glb_sha256": "97ddf59d5d649e9dbaf79f66369bc5b6b1bc757be4a5493a6ba95992d8212627",-    "footprint": "sn65hvd78eimm.kicad_mod",-    "footprint_sha256": "aa2a69e6a856c785ee91e5ea0e66cf64512d6444f8b4a88e2916ebf4cbffc925",-    "pins": "page.json component.pins",-    "pins_sha256": "6a2060ae722805924e3e54064810f90acdd713781efdcd980c2ae591f93833df"-  },-  "generator": "adom-wiki 1.8.22 (component_hero)",-  "labels": [-    {-      "pad": "1",-      "text": "RO",-      "x": -3.025,-      "y": -0.975,-      "align": "right",-      "vertical": false,-      "h": 0.325-    },-    {-      "pad": "2",-      "text": "RE",-      "x": -3.025,-      "y": -0.325,-      "align": "right",-      "vertical": false,-      "h": 0.325-    },-    {-      "pad": "3",-      "text": "DE",-      "x": -3.025,-      "y": 0.325,-      "align": "right",-      "vertical": false,-      "h": 0.325-    },-    {-      "pad": "4",-      "text": "DI",-      "x": -3.025,-      "y": 0.975,-      "align": "right",-      "vertical": false,-      "h": 0.325-    },-    {-      "pad": "5",-      "text": "GND",-      "x": 3.025,-      "y": 0.975,-      "align": "left",-      "vertical": false,-      "h": 0.325-    },-    {-      "pad": "6",-      "text": "A",-      "x": 3.025,-      "y": 0.325,-      "align": "left",-      "vertical": false,-      "h": 0.325-    },-    {-      "pad": "7",-      "text": "B",-      "x": 3.025,-      "y": -0.325,-      "align": "left",-      "vertical": false,-      "h": 0.325-    },-    {-      "pad": "8",-      "text": "VCC",-      "x": 3.025,-      "y": -0.975,-      "align": "left",-      "vertical": false,-      "h": 0.325-    }+  "signal_names": {+   "material": "Signal names - 50 percent opacity",+   "rgba": [+    0.92,+    0.96,+    1.0,+    0.5+   ],+   "font": "DejaVu Sans Mono",+   "labels": 8,+   "sides": "top + mirrored underside (single-sided)",+   "omitted": null,+   "fallback_to_pad_number": 0+  }+ },+ "align": {+  "ok": true,+  "board_underside": true,+  "electrical_pads_without_contact": [],+  "mounting_pads_left_out": [],+  "centre_offset_mm": 0.0,+  "over_pads": true,+  "tolerance_mm": 0.468,+  "orientation_flipped": false,+  "contacts_bbox_mm": [+   -2.45,+   2.45,+   -1.125,+   1.125+  ],+  "pads_bbox_mm": [+   -2.925,+   2.925,+   -1.175,+   1.175   ],-  "pads": [-    {-      "number": "1",-      "shape": "roundrect",-      "center_mm": [-        -2.1125,-        -0.975-      ],-      "size_mm": [-        1.625,-        0.4-      ],-      "rot": 0.0-    },-    {-      "number": "2",-      "shape": "roundrect",-      "center_mm": [-        -2.1125,-        -0.325-      ],-      "size_mm": [-        1.625,-        0.4-      ],-      "rot": 0.0-    },-    {-      "number": "3",-      "shape": "roundrect",-      "center_mm": [-        -2.1125,-        0.325-      ],-      "size_mm": [-        1.625,-        0.4-      ],-      "rot": 0.0-    },-    {-      "number": "4",-      "shape": "roundrect",-      "center_mm": [-        -2.1125,-        0.975-      ],-      "size_mm": [-        1.625,-        0.4-      ],-      "rot": 0.0-    },-    {-      "number": "5",-      "shape": "roundrect",-      "center_mm": [-        2.1125,-        0.975-      ],-      "size_mm": [-        1.625,-        0.4-      ],-      "rot": 0.0-    },-    {-      "number": "6",-      "shape": "roundrect",-      "center_mm": [-        2.1125,-        0.325-      ],-      "size_mm": [-        1.625,-        0.4-      ],-      "rot": 0.0-    },-    {-      "number": "7",-      "shape": "roundrect",-      "center_mm": [-        2.1125,-        -0.325-      ],-      "size_mm": [-        1.625,-        0.4-      ],-      "rot": 0.0-    },-    {-      "number": "8",-      "shape": "roundrect",-      "center_mm": [-        2.1125,-        -0.975-      ],-      "size_mm": [-        1.625,-        0.4-      ],-      "rot": 0.0-    }-  ]-}+  "seating_z_mm": 0.0+ },+ "sources": {+  "glb": "sn65hvd78eimm-etched.glb",+  "glb_sha256": "97ddf59d5d649e9dbaf79f66369bc5b6b1bc757be4a5493a6ba95992d8212627",+  "footprint": "sn65hvd78eimm.kicad_mod",+  "footprint_sha256": "aa2a69e6a856c785ee91e5ea0e66cf64512d6444f8b4a88e2916ebf4cbffc925",+  "pins": "page.json component.pins",+  "pins_sha256": "6a2060ae722805924e3e54064810f90acdd713781efdcd980c2ae591f93833df"+ },+ "generator": "factory/hero_glb.py",+ "labels": [+  {+   "pad": "1",+   "text": "RO",+   "x": -3.025,+   "y": -0.975,+   "align": "right",+   "vertical": false,+   "h": 0.325+  },+  {+   "pad": "2",+   "text": "RE",+   "x": -3.025,+   "y": -0.325,+   "align": "right",+   "vertical": false,+   "h": 0.325+  },+  {+   "pad": "3",+   "text": "DE",+   "x": -3.025,+   "y": 0.325,+   "align": "right",+   "vertical": false,+   "h": 0.325+  },+  {+   "pad": "4",+   "text": "DI",+   "x": -3.025,+   "y": 0.975,+   "align": "right",+   "vertical": false,+   "h": 0.325+  },+  {+   "pad": "5",+   "text": "GND",+   "x": 3.025,+   "y": 0.975,+   "align": "left",+   "vertical": false,+   "h": 0.325+  },+  {+   "pad": "6",+   "text": "A",+   "x": 3.025,+   "y": 0.325,+   "align": "left",+   "vertical": false,+   "h": 0.325+  },+  {+   "pad": "7",+   "text": "B",+   "x": 3.025,+   "y": -0.325,+   "align": "left",+   "vertical": false,+   "h": 0.325+  },+  {+   "pad": "8",+   "text": "VCC",+   "x": 3.025,+   "y": -0.975,+   "align": "left",+   "vertical": false,+   "h": 0.325+  }+ ],+ "pads": [+  {+   "number": "1",+   "shape": "roundrect",+   "center_mm": [+    -2.1125,+    -0.975+   ],+   "size_mm": [+    1.625,+    0.4+   ],+   "rot": 0.0+  },+  {+   "number": "2",+   "shape": "roundrect",+   "center_mm": [+    -2.1125,+    -0.325+   ],+   "size_mm": [+    1.625,+    0.4+   ],+   "rot": 0.0+  },+  {+   "number": "3",+   "shape": "roundrect",+   "center_mm": [+    -2.1125,+    0.325+   ],+   "size_mm": [+    1.625,+    0.4+   ],+   "rot": 0.0+  },+  {+   "number": "4",+   "shape": "roundrect",+   "center_mm": [+    -2.1125,+    0.975+   ],+   "size_mm": [+    1.625,+    0.4+   ],+   "rot": 0.0+  },+  {+   "number": "5",+   "shape": "roundrect",+   "center_mm": [+    2.1125,+    0.975+   ],+   "size_mm": [+    1.625,+    0.4+   ],+   "rot": 0.0+  },+  {+   "number": "6",+   "shape": "roundrect",+   "center_mm": [+    2.1125,+    0.325+   ],+   "size_mm": [+    1.625,+    0.4+   ],+   "rot": 0.0+  },+  {+   "number": "7",+   "shape": "roundrect",+   "center_mm": [+    2.1125,+    -0.325+   ],+   "size_mm": [+    1.625,+    0.4+   ],+   "rot": 0.0+  },+  {+   "number": "8",+   "shape": "roundrect",+   "center_mm": [+    2.1125,+    -0.975+   ],+   "size_mm": [+    1.625,+    0.4+   ],+   "rot": 0.0+  }+ ]+}\ No newline at end of file