Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

SN65HVD75EIMM

HGSEMI · RS-485 / RS-422 ICs · MSOP-8

SN65HVD75EIMM from HGSEMI, in a MSOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 RO output Receiver output: with RE low, RO is driven high when A-B is at least 200 mV and low when A-B is at most -200 mV, as printed in the pin table, and RO is high-impedance when RE is high.
2 RE input Receiver output enable, active low: RO is enabled while RE is low and goes high-impedance while RE is high; RE high together with DE low puts the device into low-power shutdown.
3 DE input Driver output enable: the driver outputs A and B are active when DE is high and high-impedance when DE is low; DE has a hot-plug input structure.
4 DI input Driver input: while DE is high, a low on DI drives A low and B high, and a high on DI drives A high and B low.
5 GND power_in Ground reference for the device.
6 A bidirectional Non-inverting receiver input and non-inverting driver output on the bus, rated -7 V to +12 V on the receiver and driver pins per the absolute maximum ratings.
7 B bidirectional Inverting receiver input and inverting driver output on the bus, rated -7 V to +12 V on the receiver and driver pins per the absolute maximum ratings.
8 VCC power_in Positive supply, 3.15 V to 3.45 V (absolute maximum 6 V); connect a 0.1 µF capacitor to ground.

Key specifications

Parameter Value
Manufacturer HGSEMI
Package MSOP-8
Category Interface
Pins 8

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply voltage VCC 6 V 4
Control input voltage (RE, DE) -0.3 6 V 4
Driver input voltage (DI) -0.3 6 V 4
Driver output voltage (A, B) -7 12 V 4
Receiver input voltage (A, B) -7 12 V 4
Receiver output voltage (RO) -0.3 V 4
Storage temperature -65 150 ℃ 4
Lead temperature (soldering) TLEAD 260 ℃ soldering, 10 s 4
Operating temperature range (EI grade) -40 85 ℃ SN65HVDxxEI 4
Supply voltage (operating range) VCC 3.15 3.45 V 4
Differential driver output voltage (RS-422) VOD 2 V Fig 1, RL=100Ω (RS-422) 4
Differential driver output voltage (RS-485) VOD 1.5 V Fig 1, RL=54Ω (RS-485) 4
Change in magnitude of differential driver output voltage ΔVOD 0.2 V Fig 1, RL=100Ω or RL=54Ω 4
Driver common-mode output voltage VOC 3 V Fig 1, RL=100Ω or RL=54Ω 4
Input high voltage VIH 2 V DE, DI, RE 5
Input low voltage VIL 0.8 V DE, DI 5
Input current IIN -1 1 μA DE, DI, RE 5
Input current (A, B) full duplex IA, IB 125 μA DE=GND, VCC=GND or VCC, VIN=12V 5
Input current (A, B) full duplex IA, IB -75 μA DE=GND, VCC=GND or VCC, VIN=-7V 5
Output leakage current (Y, Z) full duplex IO 125 μA DE=GND, VCC=GND or VCC, VIN=12V 5
Output leakage current (Y, Z) full duplex IO -100 μA DE=GND, VCC=GND or VCC, VIN=-7V 5
Driver short-circuit output current IOSD 250 mA 0≦VOUT≦12V 5
Driver short-circuit output current IOSD -250 mA -7≦VOUT≦Vcc 5
Driver short-circuit foldback output current IOSDF 20 mA Vcc-1V≦VOUT≦Vcc+0.5V 5
Driver short-circuit foldback output current IOSDF -20 mA -0.5V≦VOUT≦+1V 5
Receiver differential threshold voltage VTH -200 -125 -50 mV -7V≦VCM≦12V 5
Receiver output low voltage VOL 0.4 V IO=4mA, VID=-200mV 5
Receiver tri-state output current IOZR -1 1 μA 0≦VO≦VCC 5
Receiver output short-circuit current IOSR -7 95 mA 0V≦VRO≦VCC 5
Supply current (no load) Icc 400 900 μA No load, RE=VCC, DI=GND or VCC, DE=VCC 6
Supply current (no load) Icc 330 600 μA No load, RE=VCC, DE=GND 6
Supply current (no load) Icc 400 1000 μA No load, RE=GND, DI=GND or VCC, DE=VCC 6
Supply current (no load) Icc 330 800 μA No load, RE=GND, DE=GND 6
Standby mode supply current ISHDN 0.05 10 μA DE=GND, RE=VCC 6
ESD, IEC 61000-4-2 air-gap discharge (A, B) -16 16 kV 6
ESD, IEC 61000-4-2 contact discharge (A, B) -16 16 kV half duplex 6
ESD, human body model (pin to ground) -16 16 kV pin to GND 6
Driver propagation delay, low-to-high tDPLH 200 1000 ns Fig 2 & 5, RL=54Ω, CL=50pF 8
Driver propagation delay, high-to-low tDPHL 200 1000 ns Fig 2 & 5, RL=54Ω, CL=50pF 8
Driver output rise/fall time skew tDSKEW -140 140 ns Fig 2 & 5, RL=54Ω, CL=50pF 8
Driver rise or fall time tDR, tDF 250 900 ns Fig 2 & 5, RL=54Ω, CL=50pF 8
Maximum data rate (driver table) fMAX 500 kbps 8
Driver enable to output high tDZH 2500 ns Fig 3 & 6, CL=100pF, S3 closed 8
Driver enable to output low tDZL 2500 ns Fig 3 & 6, CL=100pF, S2 closed 8
Driver low to disable time tDLZ 100 ns Fig 3 & 6, CL=15pF, S2 closed 8
Driver high to disable time tDHZ 100 ns Fig 3 & 6, CL=15pF, S3 closed 8
Driver enable from standby to output high tDZH(SHDN) 5500 ns Fig 3 & 6, CL=15pF, S3 closed 8
Driver enable from standby to output low tDZL(SHDN) 5500 ns Fig 3 & 6, CL=15pF, S2 closed 8
Standby time (driver table) tSHDN 50 700 ns 8
Receiver propagation delay tRPLH, tRPHL 200 ns Fig 7 & 8, CL=15pF, /VID/≥2.0V, VID≤15ns 8
Receiver differential output rise/fall time skew tRSKEW -30 30 ns Fig 7 & 8, CL=15pF, /VID/≥2.0V, VID≤15ns 8
Maximum data rate (receiver table) fMAX 500 kbps 8
Receiver enable to output low tRZL 50 ns Fig 4 & 9, S1=-1.5V, S2 to VCC 8
Receiver enable to output high tRZH 50 ns Fig 4 & 9, S1=+1.5V, S2 to GND 8
Receiver low to disable time tRLZ 50 ns Fig 4 & 9, S1=-1.5V, S2 to VCC 8
Receiver high to disable time tRHZ 50 ns Fig 4 & 9, S1=+1.5V, S2 to GND 8
Receiver enable from standby to output high tRZH(SHDN) 5500 ns Fig 4 & 9, S1=-1.5V, S2 to VCC 8
Receiver enable from standby to output low tRZL(SHDN) 5500 ns Fig 4 & 9, S1=+1.5V, S2 to GND 8
Standby time (receiver table) tSHDN 50 700 ns 8

CAD (KiCad official)

  • Symbol: SN65HVD75EIMM
  • Footprint: Package_SO:MSOP-8_3x3mm_P0.65mm
  • 3D model: MSOP-8 (KiCad packages3D, STEP)
  • 3D model files: sn65hvd75eimm-etched.step / sn65hvd75eimm-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); sn65hvd75eimm.step / sn65hvd75eimm.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: HGSEMI datasheet (20 pp, sha256 81ed86cf3caebd1f, retrieved 2026-11-11, tier: lcsc)
  • Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF