SN65HVD75EIM

{
  "schema_version": 1,
  "type": "component",
  "slug": "sn65hvd75eim",
  "title": "SN65HVD75EIM",
  "brief": "HGSEMI RS-485 / RS-422 ICs, SOP-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "version": "0.1.0",
  "license": "CC-BY-SA-4.0",
  "tags": [
    "component",
    "interface",
    "sn65hvd75eim",
    "factory-2.0.0",
    "extractor-text"
  ],
  "component": {
    "mpn": "SN65HVD75EIM",
    "manufacturer": "HGSEMI",
    "package": "SOP-8",
    "pin_count": 8,
    "category": "Interface",
    "subcategory": "RS-485 / RS-422 ICs",
    "datasheet": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8760109373177901056",
    "parts": {
      "symbol": "sn65hvd75eim.kicad_sym",
      "footprint": "sn65hvd75eim.kicad_mod",
      "model_3d": "sn65hvd75eim-hero.glb",
      "model_3d_plain": "sn65hvd75eim-etched.glb",
      "model_3d_step": "sn65hvd75eim-etched.step",
      "model_3d_step_plain": "sn65hvd75eim.step",
      "lbr": "sn65hvd75eim.lbr"
    },
    "distributor_links": {
      "lcsc": "C725337"
    },
    "distributor_check": {
      "checked_at": "2026-10-18T14:15:05Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": null,
        "status": "quota"
      },
      "mouser": {
        "pn": null,
        "status": "quota"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "RO",
        "type": "output",
        "description": "Receiver output: with RE low, RO is high when A−B is at or above −50 mV and low when A−B is at or below −200 mV, and it is high-impedance when RE is high."
      },
      {
        "number": "2",
        "name": "RE",
        "type": "input",
        "description": "Active-low receiver output enable: RO is active when this pin is low and high-impedance when it is high, and RE high together with DE low puts the device into low-power shutdown (hot-plug input)."
      },
      {
        "number": "3",
        "name": "DE",
        "type": "input",
        "description": "Driver output enable: outputs A and B are active when DE is high and high-impedance when DE is low, and DE high is not a shutdown condition while DE low with RE high enters low-power shutdown (hot-plug input)."
      },
      {
        "number": "4",
        "name": "DI",
        "type": "input",
        "description": "Driver input: with DE high, a low on DI drives A low and B high, and a high on DI drives A high and B low."
      },
      {
        "number": "5",
        "name": "GND",
        "type": "power_in",
        "description": "Ground reference for the device."
      },
      {
        "number": "6",
        "name": "A",
        "type": "bidirectional",
        "description": "Non-inverting receiver input and driver output on the bus; the absolute maximum voltage range for A and B is −7 V to +12 V, with ±16 kV IEC 61000-4-2 ESD protection."
      },
      {
        "number": "7",
        "name": "B",
        "type": "bidirectional",
        "description": "Inverting receiver input and driver output on the bus; the absolute maximum voltage range for A and B is −7 V to +12 V, with ±16 kV IEC 61000-4-2 ESD protection."
      },
      {
        "number": "8",
        "name": "VCC",
        "type": "power_in",
        "description": "Positive supply: 3.15 V ≤ VCC ≤ 3.45 V; place a 0.1 µF capacitor to ground."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: The overbar on RE is lost in the extracted text (rendered as a placeholder). Name is given as RE bas; The RO pin description says RO goes high at A−B ≥ 200 mV and low at A−B ≤ −200 mV, but the failsafe ; The datasheet gives no explicit electrical type for A and B; bidirectional was chosen because they a"
        ],
        "pages_sent": 20,
        "cost_usd": 0.0798,
        "at": "2026-10-18T14:12:32"
      },
      "datasheet": {
        "url": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8760109373177901056",
        "pages": 20,
        "sha256": "81ed86cf3caebd1f",
        "source_tier": "lcsc"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 8,
        "described": 8,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "sn65hvd75eim.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6,
          4.9,
          1.75
        ],
        "zmin_mm": 0,
        "centre_offset_mm": 0,
        "footprint_binding": "identity",
        "sha256": "07f46cff378d30e6c27dfd5a03092c795323f86d91c71fc7e743f4f418dc553a",
        "checked": "2026-10-18",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "sn65hvd75eim-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6,
          4.9,
          1.75
        ],
        "zmin_mm": 0,
        "centre_offset_mm": 0,
        "footprint_binding": "identity",
        "sha256": "7d5930b02eb7497f1e1f0a9f6b04df56fdad4b1cf638512e23bc1a1c5ac4c6c8",
        "checked": "2026-10-18",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  },
  "metadata": {
    "specs": {
      "Manufacturer": "HGSEMI",
      "Package": "SOP-8",
      "Category": "Interface",
      "Pins": "8"
    },
    "characteristics": {
      "version": 1,
      "source": "datasheet",
      "datasheet_sha256": "81ed86cf3caebd1f591cdc7f2bcd3ebb3705deb093784754c7048dd6ec5f26f8",
      "rows": [
        {
          "name": "Supply voltage",
          "symbol": "VCC",
          "kind": "absolute_maximum",
          "unit": "V",
          "min": null,
          "typ": null,
          "max": 6,
          "conditions": "",
          "source_page": 4,
          "source": "datasheet"
        },
        {
          "name": "Control input voltage",
          "symbol": "RE, DE",
          "kind": "absolute_maximum",
          "unit": "V",
          "min": -0.3,
          "typ": null,
          "max": 6,
          "conditions": "",
          "source_page": 4,
          "source": "datasheet"
        },
        {
          "name": "Driver input voltage",
          "symbol": "DI",
          "kind": "absolute_maximum",
          "unit": "V",
          "min": -0.3,
          "typ": null,
          "max": 6,
          "conditions": "",
          "source_page": 4,
          "source": "datasheet"
        },
        {
          "name": "Driver output voltage",
          "symbol": "A,B",
          "kind": "absolute_maximum",
          "unit": "V",
          "min": -7,
          "typ": null,
          "max": 12,
          "conditions": "",
          "source_page": 4,
          "source": "datasheet"
        },
        {
          "name": "Receiver input voltage",
          "symbol": "A,B",
          "kind": "absolute_maximum",
          "unit": "V",
          "min": -7,
          "typ": null,
          "max": 12,
          "conditions": "",
          "source_page": 4,
          "source": "datasheet"
        },
        {
          "name": "Receiver output voltage",
          "symbol": "RO",
          "kind": "absolute_maximum",
          "unit": "V",
          "min": -0.3,
          "typ": null,
          "max": null,
          "conditions": "",
          "source_page": 4,
          "source": "datasheet"
        },
        {
          "name": "Continuous power dissipation (8SOP)",
          "symbol": "",
          "kind": "absolute_maximum",
          "unit": "mW",
          "min": null,
          "typ": null,
          "max": 500,
          "conditions": "TA=+70℃, 8SOP",
          "source_page": 4,
          "source": "datasheet"
        },
        {
          "name": "Storage temperature",
          "symbol": "",
          "kind": "absolute_maximum",
          "unit": "℃",
          "min": -65,
          "typ": null,
          "max": 150,
          "conditions": "",
          "source_page": 4,
          "source": "datasheet"
        },
        {
          "name": "Lead temperature (soldering)",
          "symbol": "TLEAD",
          "kind": "absolute_maximum",
          "unit": "℃",
          "min": null,
          "typ": null,
          "max": 260,
          "conditions": "焊接 10s",
          "source_page": 4,
          "source": "datasheet"
        },
        {
          "name": "Supply voltage",
          "symbol": "VCC",
          "kind": "recommended_operating",
          "unit": "V",
          "min": 3.15,
          "typ": null,
          "max": 3.45,
          "conditions": "",
          "source_page": 4,
          "source": "datasheet"
        },
        {
          "name": "Operating temperature range (industrial)",
          "symbol": "",
          "kind": "recommended_operating",
          "unit": "℃",
          "min": -40,
          "typ": null,
          "max": 85,
          "conditions": "SN65HVDxxEI",
          "source_page": 4,
          "source": "datasheet"
        },
        {
          "name": "Differential driver output voltage",
          "symbol": "VOD",
          "kind": "electrical",
          "unit": "V",
          "min": 2,
          "typ": null,
          "max": null,
          "conditions": "图1，RL=100Ω（RS-422）",
          "source_page": 4,
          "source": "datasheet"
        },
        {
          "name": "Differential driver output voltage",
          "symbol": "VOD",
          "kind": "electrical",
          "unit": "V",
          "min": 1.5,
          "typ": null,
          "max": null,
          "conditions": "图1，RL=54Ω（RS-485）",
          "source_page": 4,
          "source": "datasheet"
        },
        {
          "name": "Differential driver output voltage magnitude change",
          "symbol": "ΔVOD",
          "kind": "electrical",
          "unit": "V",
          "min": null,
          "typ": null,
          "max": 0.2,
          "conditions": "图1，RL=100Ω 或 RL=54Ω",
          "source_page": 4,
          "source": "datasheet"
        },
        {
          "name": "Driver common-mode output voltage",
          "symbol": "VOC",
          "kind": "electrical",
          "unit": "V",
          "min": null,
          "typ": null,
          "max": 3,
          "conditions": "图1，RL=100Ω 或 RL=54Ω",
          "source_page": 4,
          "source": "datasheet"
        },
        {
          "name": "Input high voltage",
          "symbol": "VIH",
          "kind": "electrical",
          "unit": "V",
          "min": 2,
          "typ": null,
          "max": null,
          "conditions": "",
          "source_page": 5,
          "source": "datasheet"
        },
        {
          "name": "Input low voltage",
          "symbol": "VIL",
          "kind": "electrical",
          "unit": "V",
          "min": null,
          "typ": null,
          "max": 0.8,
          "conditions": "",
          "source_page": 5,
          "source": "datasheet"
        },
        {
          "name": "Input current",
          "symbol": "IIN",
          "kind": "electrical",
          "unit": "μA",
          "min": -1,
          "typ": null,
          "max": 1,
          "conditions": "",
          "source_page": 5,
          "source": "datasheet"
        },
        {
          "name": "Input current (A,B) full duplex",
          "symbol": "IA, IB",
          "kind": "electrical",
          "unit": "μA",
          "min": -75,
          "typ": null,
          "max": null,
          "conditions": "DE=GND, VCC=GND 或VCC, VIN=-7V",
          "source_page": 5,
          "source": "datasheet"
        },
        {
          "name": "Input current (A,B) full duplex",
          "symbol": "IA, IB",
          "kind": "electrical",
          "unit": "μA",
          "min": null,
          "typ": null,
          "max": 125,
          "conditions": "DE=GND, VCC=GND 或VCC, VIN=12V",
          "source_page": 5,
          "source": "datasheet"
        },
        {
          "name": "Output leakage current (Y,Z) full duplex",
          "symbol": "IO",
          "kind": "electrical",
          "unit": "μA",
          "min": -100,
          "typ": null,
          "max": null,
          "conditions": "DE=GND, VCC=GND 或VCC, VIN=-7V",
          "source_page": 5,
          "source": "datasheet"
        },
        {
          "name": "Output leakage current (Y,Z) full duplex",
          "symbol": "IO",
          "kind": "electrical",
          "unit": "μA",
          "min": null,
          "typ": null,
          "max": 125,
          "conditions": "DE=GND, VCC=GND 或VCC, VIN=12V",
          "source_page": 5,
          "source": "datasheet"
        },
        {
          "name": "Driver short-circuit output current",
          "symbol": "IOSD",
          "kind": "electrical",
          "unit": "mA",
          "min": -250,
          "typ": null,
          "max": null,
          "conditions": "-7≦VOUT≦Vcc",
          "source_page": 5,
          "source": "datasheet"
        },
        {
          "name": "Driver short-circuit output current",
          "symbol": "IOSD",
          "kind": "electrical",
          "unit": "mA",
          "min": null,
          "typ": null,
          "max": 250,
          "conditions": "0≦VOUT≦12V",
          "source_page": 5,
          "source": "datasheet"
        },
        {
          "name": "Driver short-circuit foldback output current",
          "symbol": "IOSDF",
          "kind": "electrical",
          "unit": "mA",
          "min": -20,
          "typ": null,
          "max": null,
          "conditions": "-0.5V≦VOUT≦+1V",
          "source_page": 5,
          "source": "datasheet"
        },
        {
          "name": "Driver short-circuit foldback output current",
          "symbol": "IOSDF",
          "kind": "electrical",
          "unit": "mA",
          "min": null,
          "typ": null,
          "max": 20,
          "conditions": "Vcc-1V≦VOUT≦Vcc+0.5V",
          "source_page": 5,
          "source": "datasheet"
        },
        {
          "name": "Receiver differential threshold voltage",
          "symbol": "VTH",
          "kind": "electrical",
          "unit": "mV",
          "min": -200,
          "typ": -125,
          "max": -50,
          "conditions": "-7V≦VCM≦12V",
          "source_page": 5,
          "source": "datasheet"
        },
        {
          "name": "Receiver output low voltage",
          "symbol": "VOL",
          "kind": "electrical",
          "unit": "V",
          "min": null,
          "typ": null,
          "max": 0.4,
          "conditions": "IO= 4mA，VID=-200mV",
          "source_page": 5,
          "source": "datasheet"
        },
        {
          "name": "Receiver tri-state output current",
          "symbol": "IOZR",
          "kind": "electrical",
          "unit": "μA",
          "min": -1,
          "typ": null,
          "max": 1,
          "conditions": "0≦VO≦VCC",
          "source_page": 5,
          "source": "datasheet"
        },
        {
          "name": "Supply current",
          "symbol": "Icc",
          "kind": "electrical",
          "unit": "μA",
          "min": null,
          "typ": 400,
          "max": 900,
          "conditions": "无负载，￾￾￾=VCC，DI=GND 或VCC，DE=VCC",
          "source_page": 6,
          "source": "datasheet"
        },
        {
          "name": "Supply current",
          "symbol": "Icc",
          "kind": "electrical",
          "unit": "μA",
          "min": null,
          "typ": 330,
          "max": 600,
          "conditions": "无负载，￾￾￾=VCC，DI=GND 或VCC，DE=GND",
          "source_page": 6,
          "source": "datasheet"
        },
        {
          "name": "Supply current",
          "symbol": "Icc",
          "kind": "electrical",
          "unit": "μA",
          "min": null,
          "typ": 400,
          "max": 1000,
          "conditions": "无负载，￾￾￾=GND，DI=GND 或VCC，DE=VCC",
          "source_page": 6,
          "source": "datasheet"
        },
        {
          "name": "Supply current",
          "symbol": "Icc",
          "kind": "electrical",
          "unit": "μA",
          "min": null,
          "typ": 330,
          "max": 800,
          "conditions": "无负载，￾￾￾=GND，DI=GND 或VCC，DE=GND",
          "source_page": 6,
          "source": "datasheet"
        },
        {
          "name": "Standby mode supply current",
          "symbol": "ISHDN",
          "kind": "electrical",
          "unit": "μA",
          "min": null,
          "typ": 0.05,
          "max": 10,
          "conditions": "DE = GND, ￾￾￾= VCC",
          "source_page": 6,
          "source": "datasheet"
        },
        {
          "name": "ESD HBM, pin to GND",
          "symbol": "",
          "kind": "electrical",
          "unit": "kV",
          "min": -16,
          "typ": null,
          "max": 16,
          "conditions": "HBM, 管脚到地 (A, B)",
          "source_page": 6,
          "source": "datasheet"
        },
        {
          "name": "ESD IEC 61000-4-2 contact discharge",
          "symbol": "",
          "kind": "electrical",
          "unit": "kV",
          "min": -16,
          "typ": null,
          "max": 16,
          "conditions": "IEC61000-4-2 接触, 半双工 (A, B)",
          "source_page": 6,
          "source": "datasheet"
        },
        {
          "name": "Driver propagation delay",
          "symbol": "tDPLH, tDPHL",
          "kind": "timing",
          "unit": "ns",
          "min": 200,
          "typ": null,
          "max": 1000,
          "conditions": "图 2 和 5，RL=54Ω CL=50pF",
          "source_page": 8,
          "source": "datasheet"
        },
        {
          "name": "Driver output skew",
          "symbol": "tDSKEW",
          "kind": "timing",
          "unit": "ns",
          "min": -140,
          "typ": null,
          "max": 140,
          "conditions": "图2 和5，RL =54Ω CL=50pF",
          "source_page": 8,
          "source": "datasheet"
        },
        {
          "name": "Driver rise/fall time",
          "symbol": "tDR, tDF",
          "kind": "timing",
          "unit": "ns",
          "min": 250,
          "typ": null,
          "max": 900,
          "conditions": "图2 和5，RL =54Ω CL=50pF",
          "source_page": 8,
          "source": "datasheet"
        },
        {
          "name": "Maximum data rate (driver)",
          "symbol": "fMAX",
          "kind": "timing",
          "unit": "kbps",
          "min": null,
          "typ": null,
          "max": 500,
          "conditions": "",
          "source_page": 8,
          "source": "datasheet"
        },
        {
          "name": "Driver enable to output high",
          "symbol": "tDZH",
          "kind": "timing",
          "unit": "ns",
          "min": null,
          "typ": null,
          "max": 2500,
          "conditions": "图 3 和6，CL =100pF,S3 闭合",
          "source_page": 8,
          "source": "datasheet"
        },
        {
          "name": "Driver enable to output low",
          "symbol": "tDZL",
          "kind": "timing",
          "unit": "ns",
          "min": null,
          "typ": null,
          "max": 2500,
          "conditions": "图 3 和6，CL =100pF, S2 闭合",
          "source_page": 8,
          "source": "datasheet"
        },
        {
          "name": "Driver low to disable time",
          "symbol": "tDLZ",
          "kind": "timing",
          "unit": "ns",
          "min": null,
          "typ": null,
          "max": 100,
          "conditions": "图3 和6，CL =15pF S2 闭合",
          "source_page": 8,
          "source": "datasheet"
        },
        {
          "name": "Driver high to disable time",
          "symbol": "tDHZ",
          "kind": "timing",
          "unit": "ns",
          "min": null,
          "typ": null,
          "max": 100,
          "conditions": "图3 和6，CL =15pF S3 闭合",
          "source_page": 8,
          "source": "datasheet"
        },
        {
          "name": "Driver enable from standby to output high",
          "symbol": "tDZH(SHDN)",
          "kind": "timing",
          "unit": "ns",
          "min": null,
          "typ": null,
          "max": 5500,
          "conditions": "图3 和6，CL =15pF S3 闭合",
          "source_page": 8,
          "source": "datasheet"
        },
        {
          "name": "Driver enable from standby to output low",
          "symbol": "tDZL(SHDN)",
          "kind": "timing",
          "unit": "ns",
          "min": null,
          "typ": null,
          "max": 5500,
          "conditions": "图3 和6，CL =15pF S2 闭合",
          "source_page": 8,
          "source": "datasheet"
        },
        {
          "name": "Standby time (driver)",
          "symbol": "tSHDN",
          "kind": "timing",
          "unit": "ns",
          "min": 50,
          "typ": null,
          "max": 700,
          "conditions": "",
          "source_page": 8,
          "source": "datasheet"
        },
        {
          "name": "Receiver propagation delay",
          "symbol": "tRPLH, tRPHL",
          "kind": "timing",
          "unit": "ns",
          "min": null,
          "typ": null,
          "max": 200,
          "conditions": "图7 和8，CL=15pF |VID|≥2.0V，VID≤15ns",
          "source_page": 8,
          "source": "datasheet"
        },
        {
          "name": "Receiver differential output skew",
          "symbol": "tRSKEW",
          "kind": "timing",
          "unit": "ns",
          "min": -30,
          "typ": null,
          "max": 30,
          "conditions": "图7 和8，CL=15pF |VID|≥2.0V，VID≤15ns",
          "source_page": 8,
          "source": "datasheet"
        },
        {
          "name": "Maximum data rate (receiver)",
          "symbol": "fMAX",
          "kind": "timing",
          "unit": "kbps",
          "min": null,
          "typ": null,
          "max": 500,
          "conditions": "",
          "source_page": 8,
          "source": "datasheet"
        },
        {
          "name": "Receiver enable to output low",
          "symbol": "tRZL",
          "kind": "timing",
          "unit": "ns",
          "min": null,
          "typ": null,
          "max": 50,
          "conditions": "图 4 和 9，S1=-1.5V,S2 接VCC",
          "source_page": 8,
          "source": "datasheet"
        },
        {
          "name": "Receiver enable to output high",
          "symbol": "tRZH",
          "kind": "timing",
          "unit": "ns",
          "min": null,
          "typ": null,
          "max": 50,
          "conditions": "图 4 和 9，S1=+1.5V,S2 接 GND",
          "source_page": 8,
          "source": "datasheet"
        },
        {
          "name": "Receiver low to invalid time",
          "symbol": "tRLZ",
          "kind": "timing",
          "unit": "ns",
          "min": null,
          "typ": null,
          "max": 50,
          "conditions": "图4 和9，S1=-1.5V,S2 接VCC",
          "source_page": 8,
          "source": "datasheet"
        },
        {
          "name": "Receiver high to invalid time",
          "symbol": "tRHZ",
          "kind": "timing",
          "unit": "ns",
          "min": null,
          "typ": null,
          "max": 50,
          "conditions": "图 4 和 9，S1=+1.5V,S2 接 GND",
          "source_page": 8,
          "source": "datasheet"
        },
        {
          "name": "Receiver enable from standby to output high",
          "symbol": "tRZH(SHDN)",
          "kind": "timing",
          "unit": "ns",
          "min": null,
          "typ": null,
          "max": 5500,
          "conditions": "图4 和9，S1=-1.5V,S2 接VCC",
          "source_page": 8,
          "source": "datasheet"
        },
        {
          "name": "Receiver enable from standby to output low",
          "symbol": "tRZL(SHDN)",
          "kind": "timing",
          "unit": "ns",
          "min": null,
          "typ": null,
          "max": 5500,
          "conditions": "图 4 和 9，S1=+1.5V,S2 接 GND",
          "source_page": 8,
          "source": "datasheet"
        },
        {
          "name": "Standby time (receiver)",
          "symbol": "tSHDN",
          "kind": "timing",
          "unit": "ns",
          "min": 50,
          "typ": null,
          "max": 700,
          "conditions": "",
          "source_page": 8,
          "source": "datasheet"
        },
        {
          "name": "Input hysteresis",
          "symbol": "VHYS",
          "kind": "electrical",
          "unit": "mV",
          "min": null,
          "typ": 100,
          "max": null,
          "conditions": "",
          "source_page": 5,
          "source": "datasheet"
        },
        {
          "name": "Receiver input resistance",
          "symbol": "RIN",
          "kind": "electrical",
          "unit": "kΩ",
          "min": null,
          "typ": 96,
          "max": null,
          "conditions": "-7V≦VCM≦12V",
          "source_page": 5,
          "source": "datasheet"
        },
        {
          "name": "Thermal shutdown temperature",
          "symbol": "TTS",
          "kind": "thermal",
          "unit": "℃",
          "min": null,
          "typ": 165,
          "max": null,
          "conditions": "",
          "source_page": 5,
          "source": "datasheet"
        }
      ]
    }
  },
  "variants": [],
  "sections": [
    "hero",
    "viewers",
    "readme",
    "breadcrumbs",
    "info"
  ],
  "discovery_triggers": [
    "sn65hvd75eim"
  ],
  "discovery_pitch": "SN65HVD75EIM (HGSEMI) component page: datasheet pinout, KiCad symbol, footprint and 3D.",
  "author": {
    "name": "Ray",
    "email": "[email protected]"
  },
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "sn65hvd75eim.kicad_sym",
    "sn65hvd75eim.kicad_mod",
    "sn65hvd75eim.glb",
    "sn65hvd75eim.step",
    "sn65hvd75eim.lbr",
    "docs/hero.png",
    "docs/sn65hvd75eim-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "sn65hvd75eim-hero.glb",
    "sn65hvd75eim-hero.overlay.json",
    "sn65hvd75eim-etched.glb"
  ],
  "visibility": {
    "public": true
  }
}