3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownSN65HVD71DGKR
Texas Instruments · RS-485 / RS-422 ICs · VSSOP-8-0.65mm
SN65HVD71DGKR from Texas Instruments, in a VSSOP-8-0.65mm. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VCC | power_in | Supply pin for the device, operating from a 3-V to 3.6-V supply. |
| 2 | R | output | Receive data output. |
| 3 | D | input | Driver data input. |
| 4 | GND | power_in | Local device ground, the reference potential for the device. |
| 5 | Y | output | Digital bus output Y, complementary to Z. |
| 6 | Z | output | Digital bus output Z, complementary to Y. |
| 7 | B | input | Digital bus input B, complementary to A. |
| 8 | A | input | Digital bus input A, complementary to B. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | VSSOP-8-0.65mm |
| Category | Interface |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage | VCC | 3 | 3.3 | 3.6 | V | 7 | |
| Input voltage at any bus pin (separately or common mode) | VI | -7 | 12 | V | separately or common mode | 7 | |
| High-level input voltage (driver, driver enable, receiver enable inputs) | VIH | 2 | V | Max printed as VCC | 7 | ||
| Low-level input voltage (driver, driver enable, receiver enable inputs) | VIL | 0 | 0.8 | V | 7 | ||
| Differential input voltage | VID | -12 | 12 | V | 7 | ||
| Output current, driver | IO | -60 | 60 | mA | 7 | ||
| Output current, receiver | IO | -8 | 8 | mA | 7 | ||
| Differential load resistance | RL | 54 | 60 | Ω | 7 | ||
| Differential load capacitance | CL | 50 | pF | 7 | |||
| Signaling rate, HVD70, HVD71 | 1/tUI | 400 | kbps | HVD70, HVD71 | 7 | ||
| Operating free-air temperature | TA | -40 | 125 | °C | 7 | ||
| Junction temperature | TJ | -40 | 150 | °C | 7 | ||
| Supply voltage | VCC | -0.5 | 5 | V | 7 | ||
| Voltage range at any bus pin (A, B, Y, or Z) | -13 | 16.5 | V | 7 | |||
| Input voltage range at any logic pin (D, DE, or RE) | -0.3 | 5.7 | V | 7 | |||
| Voltage input range, transient pulse, any bus pin (A, B, Y, or Z) | -100 | 100 | V | through 100 Ω | 7 | ||
| Output current, receiver | -24 | 24 | mA | 7 | |||
| Junction temperature | TJ | 170 | °C | 7 | |||
| Storage temperature range | Tstg | -65 | 150 | °C | 7 | ||
| Driver differential output voltage magnitude | /VOD/ | 1.5 | V | RL = 60 Ω, 375 Ω on each output to -7 V to 12 V | 8 | ||
| Driver differential output voltage magnitude | /VOD/ | 2 | V | RL = 100 Ω (RS-422), TJ ≥ 0°C, VCC ≥ 3.2 V | 8 | ||
| Change in magnitude of driver differential output voltage | Δ/VOD/ | -50 | 0 | 50 | mV | RL = 54 Ω, CL = 50 pF | 8 |
| Steady-state common-mode output voltage | VOC(SS) | 1 | 3 | V | Center of two 27-Ω load resistors | 8 | |
| Change in differential driver output common-mode voltage | ΔVOC | -50 | 0 | 50 | mV | 8 | |
| Peak-to-peak driver common-mode output voltage | VOC(PP) | 500 | mV | 8 | |||
| Positive-going receiver differential input voltage threshold | VIT+ | -70 | -20 | mV | See (1) | 8 | |
| Negative-going receiver differential input voltage threshold | VIT- | -200 | -140 | mV | See (1) | 8 | |
| Receiver differential input voltage threshold hysteresis (VIT+ - VIT-) | Vhys | 40 | 70 | mV | 8 | ||
| Receiver high-level output voltage | VOH | 2.4 | V | IOH = -8 mA | 9 | ||
| Receiver low-level output voltage | VOL | 0.2 | 0.4 | V | IOL = 8 mA | 9 | |
| Driver input, driver enable, and receiver enable input current | II | -3 | 3 | µA | 9 | ||
| Driver short-circuit output current | IOS | -150 | 150 | mA | 9 | ||
| Supply current (quiescent), driver and receiver enabled | ICC | 750 | 1100 | µA | DE = VCC, RE = GND, No load | 9 | |
| Supply current (quiescent), driver enabled, receiver disabled | ICC | 350 | 650 | µA | DE = VCC, RE = VCC, No load | 9 | |
| Supply current (quiescent), driver disabled, receiver enabled | ICC | 650 | 800 | µA | DE = GND, RE = GND, No load | 9 | |
| Supply current (quiescent), driver and receiver disabled | ICC | 0.1 | 5 | µA | DE = GND, D = open, RE = VCC, No load | 9 | |
| Thermal shut-down junction temperature | Tsd | 170 | °C | 9 | |||
| Driver differential output rise/fall time, 400 kbps | tr, tf | 100 | 400 | 750 | ns | RL = 54 Ω, CL = 50 pF | 9 |
| Driver propagation delay, 400 kbps | tPHL, tPLH | 350 | 550 | ns | 9 | ||
| Driver pulse skew, 400 kbps | tSK(P) | 40 | ns | 9 | |||
| Driver enable time, 400 kbps | tPZH, tPZL | 300 | 750 | ns | Receiver enabled | 9 | |
| Driver enable time, 400 kbps | tPZH, tPZL | 3 | 8 | µs | Receiver disabled | 9 | |
| Receiver output rise/fall time, 400 kbps | tr, tf | 13 | 25 | ns | CL = 15 pF | 9 | |
| Receiver propagation delay time, 400 kbps | tPHL, tPLH | 70 | 110 | ns | 9 | ||
| Receiver pulse skew, 400 kbps | tSK(P) | 7 | ns | 9 | |||
| Receiver enable time, 400 kbps | tPZL(1), tPZH(1) | 20 | 115 | ns | Driver enabled | 9 | |
| Receiver enable time, 400 kbps | tPZL(2), tPZH(2) | 3 | 8 | µs | Driver disabled | 9 | |
| Differential output capacitance | COD | 15 | pF | 8 | |||
| Junction-to-ambient thermal resistance (DGK) | RθJA | 168.7 | °C/W | 8 | |||
| Junction-to-case (top) thermal resistance (DGK) | RθJC(top) | 62.2 | °C/W | 8 | |||
| Junction-to-board thermal resistance (DGK) | RθJB | 89.5 | °C/W | 8 | |||
| Junction-to-top characterization parameter (DGK) | ψJT | 7.4 | °C/W | 8 | |||
| Junction-to-board characterization parameter (DGK) | ψJB | 87.9 | °C/W | 8 |
CAD (KiCad official)
- Symbol:
SN65HVD71DGKR - Footprint:
Package_SO:VSSOP-8_2.3x2mm_P0.5mm - 3D model: VSSOP-8-0.65mm (KiCad packages3D, STEP)
- 3D model files:
sn65hvd71dgkr-etched.step/sn65hvd71dgkr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);sn65hvd71dgkr.step/sn65hvd71dgkr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (49 pp, sha256
86f57997ef2a3eb6, retrieved 2026-11-05, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).