main
Ray sn65hvd62rgtr: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding) cee4cc9
{
  "schema_version": 1,
  "type": "component",
  "slug": "sn65hvd62rgtr",
  "title": "SN65HVD62RGTR",
  "brief": "Texas Instruments RS-485 / RS-422 ICs, QFN-16-EP(3x3). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "version": "0.1.0",
  "license": "CC-BY-SA-4.0",
  "tags": [
    "component",
    "interface",
    "sn65hvd62rgtr",
    "factory-2.0.0",
    "extractor-text"
  ],
  "component": {
    "mpn": "SN65HVD62RGTR",
    "manufacturer": "Texas Instruments",
    "package": "QFN-16-EP(3x3)",
    "pin_count": 17,
    "category": "Interface",
    "subcategory": "RS-485 / RS-422 ICs",
    "datasheet": "https://www.ti.com/lit/ds/symlink/sn65hvd62.pdf",
    "parts": {
      "symbol": "sn65hvd62rgtr.kicad_sym",
      "footprint": "sn65hvd62rgtr.kicad_mod",
      "model_3d": "sn65hvd62rgtr-etched.glb",
      "model_3d_plain": "sn65hvd62rgtr.glb",
      "model_3d_step": "sn65hvd62rgtr-etched.step",
      "model_3d_step_plain": "sn65hvd62rgtr.step",
      "lbr": "sn65hvd62rgtr.lbr"
    },
    "distributor_links": {
      "lcsc": "C337495"
    },
    "pins": [
      {
        "number": "1",
        "name": "SYNCOUT",
        "type": "tri_state",
        "description": "Open drain output to synchronize other devices to the 4x-carrier oscillator at XTAL1,2 (8.704 MHz for HVD62)."
      },
      {
        "number": "2",
        "name": "TXIN",
        "type": "input",
        "description": "Digital data bit stream to driver."
      },
      {
        "number": "3",
        "name": "VL",
        "type": "power_in",
        "description": "Logic supply voltage for the device, operating range 1.6V to 5.5V."
      },
      {
        "number": "4",
        "name": "RXOUT",
        "type": "output",
        "description": "Digital data bit stream from receiver."
      },
      {
        "number": "5",
        "name": "DIR",
        "type": "output",
        "description": "Direction control output signal for bus arbitration."
      },
      {
        "number": "6",
        "name": "DIRSET2",
        "type": "input",
        "description": "Control bit 2 to set duration of DIR; DIRSET[2,1]: [L,L]=9.6kbps, [L,H]=38.4kbps, [H,L]=115kbps, [H,H]=Standby Mode."
      },
      {
        "number": "7",
        "name": "DIRSET1",
        "type": "input",
        "description": "Control bit 1 to set duration of DIR; DIRSET[2,1]: [L,L]=9.6kbps, [L,H]=38.4kbps, [H,L]=115kbps, [H,H]=Standby Mode."
      },
      {
        "number": "8",
        "name": "GND",
        "type": "power_in",
        "description": "Ground, reference potential."
      },
      {
        "number": "9",
        "name": "RES",
        "type": "input",
        "description": "Input voltage to adjust driver output power set by external resistors from BIAS pin to GND, voltage range 0.7V to 1.5V."
      },
      {
        "number": "10",
        "name": "BIAS",
        "type": "output",
        "description": "Bias voltage output for setting driver output power by external resistors."
      },
      {
        "number": "11",
        "name": "RXIN",
        "type": "input",
        "description": "Modulated input signal to the receiver with input signal amplitude of 1.12 Vpp at 2.176 MHz."
      },
      {
        "number": "12",
        "name": "TXOUT",
        "type": "output",
        "description": "Modulated output signal from the driver at center frequency 2.176 MHz."
      },
      {
        "number": "13",
        "name": "VCC",
        "type": "power_in",
        "description": "Analog supply voltage for the device, operating range 3V to 5.5V."
      },
      {
        "number": "14",
        "name": "XTAL1",
        "type": "input",
        "description": "Crystal oscillator I/O pin; connect a 4x frequency crystal between this pin and XTAL2, or connect to 8.704 MHz clock input."
      },
      {
        "number": "15",
        "name": "XTAL2",
        "type": "input",
        "description": "Crystal oscillator I/O pin; connect a 4x frequency crystal between XTAL1 and this pin, or connect to GND for clock input mode."
      },
      {
        "number": "16",
        "name": "GND",
        "type": "power_in",
        "description": "Ground, reference potential."
      },
      {
        "number": "17",
        "name": "EP",
        "type": "passive",
        "description": "Exposed pad (from the footprint; not named in the datasheet pin table)."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.2",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.2",
        "primary_model": "claude-haiku-4-5-20251001",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: XTAL1 and XTAL2 are classified as 'input' pins based on clock input mode operation and the input vol",
          "exposed pad 17 added from the footprint",
          "dropped thermal pad ['EP'] absent from footprint"
        ],
        "pages_sent": 27,
        "cost_usd": 0.2929,
        "at": "2026-09-23T18:53:18"
      },
      "datasheet": {
        "url": "https://www.ti.com/lit/ds/symlink/sn65hvd62.pdf",
        "pages": 27,
        "sha256": "fa1a4050145cc5e6",
        "source_tier": "mfr"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 17,
        "described": 17,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "sn65hvd62rgtr.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          3,
          3,
          0.785
        ],
        "zmin_mm": 0,
        "centre_offset_mm": 0,
        "footprint_binding": "identity",
        "sha256": "3eb81ffac423a66cdcfead8efe56401da171edaf1f2257049aad7b2d3900f6c8",
        "checked": "2026-10-07",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "sn65hvd62rgtr-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          3,
          3,
          0.785
        ],
        "zmin_mm": 0,
        "centre_offset_mm": 0,
        "footprint_binding": "identity",
        "sha256": "fa6b739420bc66925240c0e9f22a5836d3d2f210801c2e4a90b21dffab21a9b5",
        "checked": "2026-10-07",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  },
  "metadata": {
    "specs": {
      "Manufacturer": "Texas Instruments",
      "Package": "QFN-16-EP(3x3)",
      "Category": "Interface",
      "Pins": "17"
    }
  },
  "variants": [],
  "sections": [
    "hero",
    "viewers",
    "readme",
    "breadcrumbs",
    "info"
  ],
  "discovery_triggers": [
    "sn65hvd62rgtr"
  ],
  "discovery_pitch": "SN65HVD62RGTR (Texas Instruments) component page with datasheet-verified CAD.",
  "author": {
    "name": "Ray"
  },
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "sn65hvd62rgtr.kicad_sym",
    "sn65hvd62rgtr.kicad_mod",
    "sn65hvd62rgtr.glb",
    "sn65hvd62rgtr.step",
    "sn65hvd62rgtr.lbr",
    "docs/hero.png",
    "docs/sn65hvd62rgtr-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html"
  ],
  "visibility": {
    "public": true
  },
  "updated_at": "2026-09-25T06:28:47.107Z"
}