component
SN65HVD62RGTR
Public Made by Adomby adom
Texas Instruments RS-485 / RS-422 ICs, QFN-16-EP(3x3). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
main
Ray
sn65hvd62rgtr: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding)
cee4cc9
123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233
{
"slug": "sn65hvd62rgtr",
"version": "0.1.0",
"type": "component",
"description": "Texas Instruments RS-485 / RS-422 ICs, QFN-16-EP(3x3). Datasheet-verified pinout, KiCad symbol/footprint/3D.",
"tags": [
"component",
"interface",
"sn65hvd62rgtr",
"factory-2.0.0",
"extractor-text"
],
"dependencies": {},
"hero": {
"type": "image",
"path": "docs/hero.png"
},
"files": [
"page.json",
"README.md",
"sn65hvd62rgtr.kicad_sym",
"sn65hvd62rgtr.kicad_mod",
"sn65hvd62rgtr.glb",
"sn65hvd62rgtr.step",
"sn65hvd62rgtr.lbr",
"docs/hero.png",
"docs/sn65hvd62rgtr-datasheet.pdf",
"viewers/symbol.html",
"viewers/footprint.html"
],
"component": {
"mpn": "SN65HVD62RGTR",
"manufacturer": "Texas Instruments",
"package": "QFN-16-EP(3x3)",
"pin_count": 17,
"category": "Interface",
"subcategory": "RS-485 / RS-422 ICs",
"datasheet": "https://www.ti.com/lit/ds/symlink/sn65hvd62.pdf",
"parts": {
"symbol": "sn65hvd62rgtr.kicad_sym",
"footprint": "sn65hvd62rgtr.kicad_mod",
"model_3d": "sn65hvd62rgtr-etched.glb",
"model_3d_plain": "sn65hvd62rgtr.glb",
"model_3d_step": "sn65hvd62rgtr-etched.step",
"model_3d_step_plain": "sn65hvd62rgtr.step",
"lbr": "sn65hvd62rgtr.lbr"
},
"distributor_links": {
"lcsc": "C337495"
},
"pins": [
{
"number": "1",
"name": "SYNCOUT",
"type": "tri_state",
"description": "Open drain output to synchronize other devices to the 4x-carrier oscillator at XTAL1,2 (8.704 MHz for HVD62)."
},
{
"number": "2",
"name": "TXIN",
"type": "input",
"description": "Digital data bit stream to driver."
},
{
"number": "3",
"name": "VL",
"type": "power_in",
"description": "Logic supply voltage for the device, operating range 1.6V to 5.5V."
},
{
"number": "4",
"name": "RXOUT",
"type": "output",
"description": "Digital data bit stream from receiver."
},
{
"number": "5",
"name": "DIR",
"type": "output",
"description": "Direction control output signal for bus arbitration."
},
{
"number": "6",
"name": "DIRSET2",
"type": "input",
"description": "Control bit 2 to set duration of DIR; DIRSET[2,1]: [L,L]=9.6kbps, [L,H]=38.4kbps, [H,L]=115kbps, [H,H]=Standby Mode."
},
{
"number": "7",
"name": "DIRSET1",
"type": "input",
"description": "Control bit 1 to set duration of DIR; DIRSET[2,1]: [L,L]=9.6kbps, [L,H]=38.4kbps, [H,L]=115kbps, [H,H]=Standby Mode."
},
{
"number": "8",
"name": "GND",
"type": "power_in",
"description": "Ground, reference potential."
},
{
"number": "9",
"name": "RES",
"type": "input",
"description": "Input voltage to adjust driver output power set by external resistors from BIAS pin to GND, voltage range 0.7V to 1.5V."
},
{
"number": "10",
"name": "BIAS",
"type": "output",
"description": "Bias voltage output for setting driver output power by external resistors."
},
{
"number": "11",
"name": "RXIN",
"type": "input",
"description": "Modulated input signal to the receiver with input signal amplitude of 1.12 Vpp at 2.176 MHz."
},
{
"number": "12",
"name": "TXOUT",
"type": "output",
"description": "Modulated output signal from the driver at center frequency 2.176 MHz."
},
{
"number": "13",
"name": "VCC",
"type": "power_in",
"description": "Analog supply voltage for the device, operating range 3V to 5.5V."
},
{
"number": "14",
"name": "XTAL1",
"type": "input",
"description": "Crystal oscillator I/O pin; connect a 4x frequency crystal between this pin and XTAL2, or connect to 8.704 MHz clock input."
},
{
"number": "15",
"name": "XTAL2",
"type": "input",
"description": "Crystal oscillator I/O pin; connect a 4x frequency crystal between XTAL1 and this pin, or connect to GND for clock input mode."
},
{
"number": "16",
"name": "GND",
"type": "power_in",
"description": "Ground, reference potential."
},
{
"number": "17",
"name": "EP",
"type": "passive",
"description": "Exposed pad (from the footprint; not named in the datasheet pin table)."
}
],
"provenance": {
"extractor": "extract_pins 0.2",
"factory_chain": {
"factory": "2.0.0",
"extractor": "extract_pins 0.2",
"primary_model": "claude-haiku-4-5-20251001",
"primary_mode": "text",
"consensus_model": "claude-sonnet-5",
"consensus": "agreed",
"guards": "pin_guards 0.1: passed",
"guard_notes": [
"extractor flagged: XTAL1 and XTAL2 are classified as 'input' pins based on clock input mode operation and the input vol",
"exposed pad 17 added from the footprint",
"dropped thermal pad ['EP'] absent from footprint"
],
"pages_sent": 27,
"cost_usd": 0.2929,
"at": "2026-09-23T18:53:18"
},
"datasheet": {
"url": "https://www.ti.com/lit/ds/symlink/sn65hvd62.pdf",
"pages": 27,
"sha256": "fa1a4050145cc5e6",
"source_tier": "mfr"
},
"cad": "KiCad official (CC-BY-SA 4.0)",
"pins": {
"total": 17,
"described": 17,
"cites_pages": true,
"refuses_to_fabricate": true
}
},
"viewers": {
"symbol": "viewers/symbol.html",
"footprint": "viewers/footprint.html"
},
"models_3d": [
{
"file": "sn65hvd62rgtr.step",
"role": "plain",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "z = 0",
"extents_mm": [
3.0,
3.0,
0.785
],
"zmin_mm": 0.0,
"centre_offset_mm": 0.0,
"footprint_binding": "identity",
"sha256": "3eb81ffac423a66cdcfead8efe56401da171edaf1f2257049aad7b2d3900f6c8",
"checked": "2026-10-07",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
},
{
"file": "sn65hvd62rgtr-etched.step",
"role": "eda",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "z = 0",
"extents_mm": [
3.0,
3.0,
0.785
],
"zmin_mm": 0.0,
"centre_offset_mm": 0.0,
"footprint_binding": "identity",
"sha256": "fa6b739420bc66925240c0e9f22a5836d3d2f210801c2e4a90b21dffab21a9b5",
"checked": "2026-10-07",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
}
]
}
}