main
History Download
Ray Initial commit: component/sn65hvd37dr 7b81cc4

SN65HVD37DR

Texas Instruments · RS-485 / RS-422 ICs · SOIC-14

SN65HVD37DR from Texas Instruments, in a SOIC-14. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 NC unconnected No internal connection.
2 R output Receiver output; outputs the logic level corresponding to the bus differential input per the receiver function table, VOH ≥ 2.4V at IOH=-8mA and VOL 0.2-0.4V at IOL=8mA, goes high-impedance when RE is high or open.
3 RE input Receiver enable, active low; a low level enables the R output, a high level or open (default) forces R to a high-impedance state; 5V-tolerant logic input, VIH ≥2V, VIL ≤0.8V.
4 DE input Driver enable, active high; a high level enables the Y/Z differential driver outputs, a low level or open (default) disables the driver to high impedance; 5V-tolerant logic input, VIH ≥2V, VIL ≤0.8V.
5 D input Driver data input; a high level drives Y high and Z low, a low level drives Y low and Z high (open input defaults to driving Y high/Z low when DE is high); 5V-tolerant logic input, VIH ≥2V, VIL ≤0.8V.
6 GND power_in Ground reference; datasheet notes that both pins 6 and 7 should be connected to ground.
7 GND power_in Ground reference; datasheet notes that both pins 6 and 7 should be connected to ground.
8 NC unconnected No internal connection.
9 Y output Noninverting differential driver output;
10 Z output Inverting differential driver output, complementary to Y;
11 B input Inverting receiver differential input; bus input voltage range -7V to 12V (separately or common mode), differential input voltage range -12V to 12V, part of the RS-485 bus port.
12 A input Noninverting receiver differential input; bus input voltage range -7V to 12V (separately or common mode), differential input voltage range -12V to 12V, part of the RS-485 bus port.
13 VCC power_in Supply voltage input, 3V to 3.6V (3.3V nominal); datasheet notes that both pins 13 and 14 should be connected to the supply voltage.
14 VCC power_in Supply voltage input, 3V to 3.6V (3.3V nominal); datasheet notes that both pins 13 and 14 should be connected to the supply voltage.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package SOIC-14
Category Interface
Pins 14

CAD (KiCad official)

  • Symbol: SN65HVD37DR
  • Footprint: Package_SO:SOIC-14_3.9x8.7mm_P1.27mm
  • 3D model: SOIC-14 (KiCad packages3D, STEP)
  • 3D model files: sn65hvd37dr-etched.step / sn65hvd37dr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); sn65hvd37dr.step / sn65hvd37dr.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (20 pp, sha256 a3429080066326f1, retrieved 2026-09-23, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.2, primary claude-haiku-4-5-20251001 (text), consensus claude-sonnet-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF