component
SN65HVD267DR
Public Made by Adomby adom
Texas Instruments CAN Transceivers, SOIC-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownSN65HVD267DR
Texas Instruments · CAN Transceivers · SOIC-8
SN65HVD267DR from Texas Instruments, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | TXD | input | CAN transmit data input, LOW for dominant and HIGH for recessive bus states; the terminal is pulled up to VCC to force a recessive input if it floats. |
| 2 | GND | power_in | Ground connection; all voltages except differential bus voltages are referenced to this terminal. |
| 3 | VCC | power_in | Transceiver 5-V supply voltage with absolute maximum of 6 V; undervoltage lockout places the device in protected mode with the bus high impedance when VCC is bad. |
| 4 | RXD | output | CAN receive data output, LOW for dominant and HIGH for recessive bus states, with a maximum output current of 12 mA; on the SN65HVD267 it returns high during an RXD dominant timeout. |
| 5 | FAULT | output | Open-drain FAULT output on the SN65HVD267 that turns off and goes high when pulled up to VCC or the IO supply on a TXD dominant timeout, RXD dominant timeout, thermal shutdown, or undervoltage lockout, with a maximum output current of 20 mA. |
| 6 | CANL | bidirectional | Low-level CAN bus line; bus I/O voltage is limited to -27 V to 40 V (absolute maximum). |
| 7 | CANH | bidirectional | High-level CAN bus line; bus I/O voltage is limited to -27 V to 40 V (absolute maximum). |
| 8 | S | input | Mode select terminal, active high to select silent mode; the terminal is pulled down to GND to force normal mode if it floats, and logic input voltage is limited to -0.3 V to 6 V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOIC-8 |
| Category | Interface |
| Pins | 8 |
CAD (KiCad official)
- Symbol:
SN65HVD267DR - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOIC-8 (KiCad packages3D, STEP)
- 3D model files:
sn65hvd267dr-etched.step/sn65hvd267dr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);sn65hvd267dr.step/sn65hvd267dr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (35 pp, sha256
8efd4739903f27e6, retrieved 2026-10-11, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).