← Commit history

Initial commit: component/sn65hvd233mdrep

Ray ·b476b34e4b ·
2 files changed +185
README.mdadded+44
@@ -0,0 +1,44 @@+# SN65HVD233MDREP++**Texas Instruments** · CAN Transceivers · SOIC-8++SN65HVD233MDREP from Texas Instruments, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | D | input | LVTTL-compatible driver input; low level (≤0.33 V) selects dominant CAN bus state, high level (>0.33 V) selects recessive state; 5-V tolerant input with input current range ±30 µA. |+| 2 | GND | power_in | Ground reference for the device. |+| 3 | VCC | power_in | Power supply input; rated supply voltage range 3.0 to 3.6 V nominal with -0.3 to 7 V absolute maximum. |+| 4 | R | output | Differential receiver output; low when bus is dominant (|VID| ≥0.9 V), high when bus is recessive (|VID| ≤0.5 V); output voltage swing 0.4 to 2.4 V. |+| 5 | LBK | input | Logic input for loopback and diagnostic mode; high level (>0.75 VCC) places bus output terminals in high-impedance state and enables driver input (D) to receiver output (R) loopback without disturbing the CAN bus; internal pull-down if left open. |+| 6 | CANL | bidirectional | Differential CAN bus low terminal; ±36 V transient overvoltage protection with 100 Ω test impedance; -7 V to 12 V common-mode range; input impedance 20 to 50 kΩ; 40 pF input capacitance. |+| 7 | CANH | bidirectional | Differential CAN bus high terminal; ±36 V transient overvoltage protection with 100 Ω test impedance; -7 V to 12 V common-mode range; input impedance 20 to 50 kΩ; 40 pF input capacitance. |+| 8 | RS | input | Slope control and standby mode input; connection to ground selects high-speed mode (0 Ω), adjustable slope control via 10-100 kΩ resistor to ground (2-15 V/µs slew rate), or low-power standby mode when >0.75 VCC applied (200 µA typical standby current). |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | Texas Instruments |+| Package | SOIC-8 |+| Category | Interface |+| Pins | 8 |++## CAD (KiCad official)++- Symbol: `SN65HVD233MDREP`+- Footprint: `Package_SO:SOIC-8_3.9x4.9mm_P1.27mm`+- 3D model: SOIC-8 (KiCad packages3D, STEP)+- 3D model files: `sn65hvd233mdrep-etched.step` / `sn65hvd233mdrep-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `sn65hvd233mdrep.step` / `sn65hvd233mdrep.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/cn/lit/gpn/sn65hvd233-ep) (29 pp, sha256 `adb069f294598821`, retrieved 2026-09-23, tier: lcsc)+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.2`, primary `claude-haiku-4-5-20251001` (text), consensus `claude-sonnet-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/sn65hvd233mdrep-datasheet.pdf)
page.jsonadded+141
@@ -0,0 +1,141 @@+{+  "slug": "sn65hvd233mdrep",+  "version": "0.1.0",+  "type": "component",+  "description": "Texas Instruments CAN Transceivers, SOIC-8. Datasheet-verified pinout, KiCad symbol/footprint/3D.",+  "tags": [+    "component",+    "interface",+    "sn65hvd233mdrep",+    "factory-2.0.0",+    "extractor-text"+  ],+  "dependencies": {},+  "hero": {+    "type": "image",+    "path": "docs/hero.png"+  },+  "files": [+    "page.json",+    "README.md",+    "sn65hvd233mdrep.kicad_sym",+    "sn65hvd233mdrep.kicad_mod",+    "sn65hvd233mdrep.glb",+    "sn65hvd233mdrep.step",+    "sn65hvd233mdrep.lbr",+    "docs/hero.png",+    "docs/sn65hvd233mdrep-datasheet.pdf",+    "viewers/symbol.html",+    "viewers/footprint.html"+  ],+  "component": {+    "mpn": "SN65HVD233MDREP",+    "manufacturer": "Texas Instruments",+    "package": "SOIC-8",+    "pin_count": 8,+    "category": "Interface",+    "subcategory": "CAN Transceivers",+    "datasheet": "https://www.ti.com/cn/lit/gpn/sn65hvd233-ep",+    "parts": {+      "symbol": "sn65hvd233mdrep.kicad_sym",+      "footprint": "sn65hvd233mdrep.kicad_mod",+      "model_3d": "sn65hvd233mdrep-etched.glb",+      "model_3d_plain": "sn65hvd233mdrep.glb",+      "model_3d_step": "sn65hvd233mdrep-etched.step",+      "model_3d_step_plain": "sn65hvd233mdrep.step",+      "lbr": "sn65hvd233mdrep.lbr"+    },+    "distributor_links": {+      "lcsc": "C2671593"+    },+    "pins": [+      {+        "number": "1",+        "name": "D",+        "type": "input",+        "description": "LVTTL-compatible driver input; low level (≤0.33 V) selects dominant CAN bus state, high level (>0.33 V) selects recessive state; 5-V tolerant input with input current range ±30 µA."+      },+      {+        "number": "2",+        "name": "GND",+        "type": "power_in",+        "description": "Ground reference for the device."+      },+      {+        "number": "3",+        "name": "VCC",+        "type": "power_in",+        "description": "Power supply input; rated supply voltage range 3.0 to 3.6 V nominal with -0.3 to 7 V absolute maximum."+      },+      {+        "number": "4",+        "name": "R",+        "type": "output",+        "description": "Differential receiver output; low when bus is dominant (|VID| ≥0.9 V), high when bus is recessive (|VID| ≤0.5 V); output voltage swing 0.4 to 2.4 V."+      },+      {+        "number": "5",+        "name": "LBK",+        "type": "input",+        "description": "Logic input for loopback and diagnostic mode; high level (>0.75 VCC) places bus output terminals in high-impedance state and enables driver input (D) to receiver output (R) loopback without disturbing the CAN bus; internal pull-down if left open."+      },+      {+        "number": "6",+        "name": "CANL",+        "type": "bidirectional",+        "description": "Differential CAN bus low terminal; ±36 V transient overvoltage protection with 100 Ω test impedance; -7 V to 12 V common-mode range; input impedance 20 to 50 kΩ; 40 pF input capacitance."+      },+      {+        "number": "7",+        "name": "CANH",+        "type": "bidirectional",+        "description": "Differential CAN bus high terminal; ±36 V transient overvoltage protection with 100 Ω test impedance; -7 V to 12 V common-mode range; input impedance 20 to 50 kΩ; 40 pF input capacitance."+      },+      {+        "number": "8",+        "name": "RS",+        "type": "input",+        "description": "Slope control and standby mode input; connection to ground selects high-speed mode (0 Ω), adjustable slope control via 10-100 kΩ resistor to ground (2-15 V/µs slew rate), or low-power standby mode when >0.75 VCC applied (200 µA typical standby current)."+      }+    ],+    "provenance": {+      "extractor": "extract_pins 0.2",+      "factory_chain": {+        "factory": "2.0.0",+        "extractor": "extract_pins 0.2",+        "primary_model": "claude-haiku-4-5-20251001",+        "primary_mode": "text",+        "consensus_model": "claude-sonnet-5",+        "consensus": "agreed",+        "guards": "pin_guards 0.1: passed",+        "guard_notes": [],+        "pages_sent": 29,+        "cost_usd": 0.2397,+        "at": "2026-09-23T19:25:24"+      },+      "datasheet": {+        "url": "https://www.ti.com/cn/lit/gpn/sn65hvd233-ep",+        "pages": 29,+        "sha256": "adb069f294598821",+        "source_tier": "lcsc"+      },+      "cad": "KiCad official (CC-BY-SA 4.0)",+      "pins": {+        "total": 8,+        "described": 8,+        "cites_pages": true,+        "refuses_to_fabricate": true+      }+    },+    "viewers": {+      "symbol": "viewers/symbol.html",+      "footprint": "viewers/footprint.html"+    }+  },+  "visibility": "public",+  "org": "adom",+  "author": {+    "name": "Ray",+    "email": "[email protected]"+  }+}\ No newline at end of file