← Commit history

sn65hvd233mdrep: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding)

Ray ·07bdc4067b · ·parent 47ff473
2 files changed +51−9
package.json+28−7
@@ -53,7 +53,7 @@         "number": "1",         "name": "D",         "type": "input",-        "description": "LVTTL-compatible driver input; low level (\u22640.33 V) selects dominant CAN bus state, high level (>0.33 V) selects recessive state; 5-V tolerant input with input current range \u00b130 \u00b5A."+        "description": "LVTTL-compatible driver input; low level (≤0.33 V) selects dominant CAN bus state, high level (>0.33 V) selects recessive state; 5-V tolerant input with input current range ±30 µA."       },       {         "number": "2",@@ -71,7 +71,7 @@         "number": "4",         "name": "R",         "type": "output",-        "description": "Differential receiver output; low when bus is dominant (|VID| \u22650.9 V), high when bus is recessive (|VID| \u22640.5 V); output voltage swing 0.4 to 2.4 V."+        "description": "Differential receiver output; low when bus is dominant (|VID| ≥0.9 V), high when bus is recessive (|VID| ≤0.5 V); output voltage swing 0.4 to 2.4 V."       },       {         "number": "5",@@ -83,19 +83,19 @@         "number": "6",         "name": "CANL",         "type": "bidirectional",-        "description": "Differential CAN bus low terminal; \u00b136 V transient overvoltage protection with 100 \u03a9 test impedance; -7 V to 12 V common-mode range; input impedance 20 to 50 k\u03a9; 40 pF input capacitance."+        "description": "Differential CAN bus low terminal; ±36 V transient overvoltage protection with 100 Ω test impedance; -7 V to 12 V common-mode range; input impedance 20 to 50 kΩ; 40 pF input capacitance."       },       {         "number": "7",         "name": "CANH",         "type": "bidirectional",-        "description": "Differential CAN bus high terminal; \u00b136 V transient overvoltage protection with 100 \u03a9 test impedance; -7 V to 12 V common-mode range; input impedance 20 to 50 k\u03a9; 40 pF input capacitance."+        "description": "Differential CAN bus high terminal; ±36 V transient overvoltage protection with 100 Ω test impedance; -7 V to 12 V common-mode range; input impedance 20 to 50 kΩ; 40 pF input capacitance."       },       {         "number": "8",         "name": "RS",         "type": "input",-        "description": "Slope control and standby mode input; connection to ground selects high-speed mode (0 \u03a9), adjustable slope control via 10-100 k\u03a9 resistor to ground (2-15 V/\u00b5s slew rate), or low-power standby mode when >0.75 VCC applied (200 \u00b5A typical standby current)."+        "description": "Slope control and standby mode input; connection to ground selects high-speed mode (0 Ω), adjustable slope control via 10-100 kΩ resistor to ground (2-15 V/µs slew rate), or low-power standby mode when >0.75 VCC applied (200 µA typical standby current)."       }     ],     "provenance": {@@ -130,6 +130,27 @@     "viewers": {       "symbol": "viewers/symbol.html",       "footprint": "viewers/footprint.html"-    }+    },+    "models_3d": [+      {+        "file": "sn65hvd233mdrep.step",+        "role": "plain",+        "up": "Z",+        "units": "mm",+        "origin": "footprint origin = pad-pattern centre",+        "seat": "z = 0",+        "extents_mm": [+          6.0,+          4.9,+          1.75+        ],+        "zmin_mm": -0.0,+        "centre_offset_mm": 0.0,+        "footprint_binding": "identity",+        "sha256": "07f46cff378d30e6c27dfd5a03092c795323f86d91c71fc7e743f4f418dc553a",+        "checked": "2026-10-07",+        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+      }+    ]   }-}\ No newline at end of file+}
page.json+23−2
@@ -115,7 +115,28 @@     "viewers": {       "symbol": "viewers/symbol.html",       "footprint": "viewers/footprint.html"-    }+    },+    "models_3d": [+      {+        "file": "sn65hvd233mdrep.step",+        "role": "plain",+        "up": "Z",+        "units": "mm",+        "origin": "footprint origin = pad-pattern centre",+        "seat": "z = 0",+        "extents_mm": [+          6.0,+          4.9,+          1.75+        ],+        "zmin_mm": -0.0,+        "centre_offset_mm": 0.0,+        "footprint_binding": "identity",+        "sha256": "07f46cff378d30e6c27dfd5a03092c795323f86d91c71fc7e743f4f418dc553a",+        "checked": "2026-10-07",+        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+      }+    ]   },   "metadata": {     "specs": {@@ -163,4 +184,4 @@     "public": true   },   "updated_at": "2026-09-25T06:26:51.572Z"-}\ No newline at end of file+}