3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownSN65HVD1785P
Texas Instruments · RS-485 / RS-422 ICs · PDIP-8
SN65HVD1785P from Texas Instruments, in a PDIP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | R | output | Receive data output, with a recommended receiver output current of -8 mA to 8 mA, and it goes to a fail-safe high on an open, shorted, or idle bus. |
| 2 | RE | input | Receiver enable, active low, with VIH of 2 V minimum (referenced to VCC) and VIL of 0.8 V maximum, where a high level puts R into the high-impedance state. |
| 3 | DE | input | Driver enable, active high, with VIH of 2 V minimum and VIL of 0.8 V maximum, where a low level or an open pin disables the driver so the bus pins are high-impedance. |
| 4 | D | input | Driver data input, with VIH of 2 V minimum and VIL of 0.8 V maximum, where D high drives A high and B low, and D low drives A low and B high when the driver is enabled. |
| 5 | GND | power_in | Local device ground, serving as the reference potential for the transceiver. |
| 6 | A | bidirectional | Complementary bus pin, acting as driver output or receiver input, rated -70 V to 70 V absolute maximum and operating over a bus common-mode range of -20 V to 25 V. |
| 7 | B | bidirectional | Complementary bus pin, acting as driver output or receiver input, rated -70 V to 70 V absolute maximum and operating over a bus common-mode range of -20 V to 25 V. |
| 8 | VCC | power_in | Supply voltage of 4.5 V to 5.5 V (5 V nominal), with an absolute maximum of 7 V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | PDIP-8 |
| Category | Interface |
| Pins | 8 |
CAD (KiCad official)
- Symbol:
SN65HVD1785P - Footprint:
Package_DIP:DIP-8_W7.62mm - 3D model: PDIP-8 (KiCad packages3D, STEP)
- 3D model files:
sn65hvd1785p-etched.step/sn65hvd1785p-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);sn65hvd1785p.step/sn65hvd1785p.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (38 pp, sha256
d7e325726dcf4852, retrieved 2026-10-12, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).