Generated by kicad-footprint-generator · KiCad file format 20260206
SN65HVD1782D
Texas Instruments · RS-485 / RS-422 ICs · SOIC-8
SN65HVD1782D from Texas Instruments, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | R | output | Receive data output of the receiver, driven from the differential bus inputs. |
| 2 | RE | input | Receiver enable input that is active low; the receiver is enabled when RE is logic low. |
| 3 | DE | input | Driver enable input that is active high; the driver is enabled when DE is logic high. |
| 4 | D | input | Driver data input that sets the state of the bus outputs when the driver is enabled. |
| 5 | GND | power_in | Local device ground reference potential. |
| 6 | A | bidirectional | Driver output or receiver input for the bus, complementary to pin B; bus pin fault protection is up to ±30 V for the SN65HVD1782. |
| 7 | B | bidirectional | Driver output or receiver input for the bus, complementary to pin A; bus pin fault protection is up to ±30 V for the SN65HVD1782. |
| 8 | VCC | power_in | Supply pin, specified in the pin table at 4.5-V to 5.5-V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOIC-8 |
| Category | Interface |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage | VCC | 3.15 | 5 | 5.5 | V | 5 | |
| Input voltage at any bus terminal (separately or common mode) | VI | -7 | 12 | V | 5 | ||
| High-level input voltage (driver, driver enable, receiver enable inputs) | VIH | 2 | V | Max is VCC | 5 | ||
| Low-level input voltage (driver, driver enable, receiver enable inputs) | VIL | 0 | 0.8 | V | 5 | ||
| Differential input voltage | VID | -12 | 12 | V | 5 | ||
| Output current, driver | IO | -60 | 60 | mA | 5 | ||
| Output current, receiver | IO | -8 | 8 | mA | 5 | ||
| Differential load resistance | RL | 54 | 60 | Ω | 5 | ||
| Differential load capacitance | CL | 50 | pF | 5 | |||
| Signaling rate SN65HVD1782 | 1/tUI | 10 | Mbps | 5 | |||
| Operating free-air temperature, 3.3-V supply | TA | -40 | 125 | °C | 3.3-V supply | 5 | |
| Operating free-air temperature, 5-V supply | TA | -40 | 105 | °C | 5-V supply | 5 | |
| Junction temperature | TJ | -40 | 150 | °C | 5 | ||
| Supply voltage | VCC | -0.5 | 7 | V | 4 | ||
| Voltage at bus pin, SN65HVD1782 A, B pins | VBUS | -70 | 30 | V | SN65HVD1782 A, B pins | 4 | |
| Input voltage at any logic pin | VI | -0.3 | V | Max is VCC + 0.3 V | 4 | ||
| Transient overvoltage pulse through 100 Ω per TIA-485 | -70 | 70 | V | Through 100 Ω per TIA-485 | 4 | ||
| Receiver output current | -24 | 24 | mA | 4 | |||
| Junction temperature | TJ | 170 | °C | 4 | |||
| Storage temperature | Tstg | -55 | 150 | °C | 4 | ||
| Junction-to-ambient thermal resistance, JEDEC high-K model | RθJA | 138 | °C/W | D (SOIC) package, JEDEC high-K model | 5 | ||
| Junction-to-ambient thermal resistance, JEDEC low-K model | RθJA | 242 | °C/W | D (SOIC) package, JEDEC low-K model | 5 | ||
| Junction-to-case (top) thermal resistance | RθJC(top) | 61 | °C/W | D (SOIC) package | 5 | ||
| Junction-to-board thermal resistance | RθJB | 62 | °C/W | D (SOIC) package | 5 | ||
| Junction-to-top characterization parameter | ψJT | 3.4 | °C/W | D (SOIC) package | 5 | ||
| Junction-to-board characterization parameter | ψJB | 33.4 | °C/W | D (SOIC) package | 5 | ||
| Power dissipation, 5-V supply, unterminated | PD | 290 | mW | VCC = 5.5 V, TJ = 150°C, RL = 300 Ω, CL = 50 pF (driver), CL = 15 pF (receiver) | 7 | ||
| Power dissipation, 5-V supply, RS-422 load | PD | 320 | mW | VCC = 5.5 V, TJ = 150°C, RL = 100 Ω, CL = 50 pF (driver), CL = 15 pF (receiver) | 7 | ||
| Power dissipation, 5-V supply, RS-485 load | PD | 400 | mW | VCC = 5.5 V, TJ = 150°C, RL = 54 Ω, CL = 50 pF (driver), CL = 15 pF (receiver) | 7 | ||
| Thermal-shutdown junction temperature | TSD | 170 | °C | 7 | |||
| Driver differential output voltage magnitude | /VOD/ | 1.5 | V | RL = 60 Ω, 4.75 V ≤ VCC, -7 V to 12 V, TA < 85°C | 6 | ||
| Driver differential output voltage magnitude | /VOD/ | 1.4 | V | RL = 60 Ω, 4.75 V ≤ VCC, -7 V to 12 V, TA < 125°C | 6 | ||
| Driver differential output voltage magnitude | /VOD/ | 1.7 | 2 | V | RL = 54 Ω, 4.75 V ≤ VCC ≤ 5.25 V, TA < 85°C | 6 | |
| Driver differential output voltage magnitude | /VOD/ | 0.8 | 1 | V | RL = 54 Ω, 3.15 V ≤ VCC ≤ 3.45 V | 6 | |
| Driver differential output voltage magnitude | /VOD/ | 2.2 | 2.5 | V | RL = 100 Ω, 4.75 V ≤ VCC ≤ 5.25 V, TA < 85°C | 6 | |
| Driver differential output voltage magnitude | /VOD/ | 2 | V | RL = 100 Ω, 4.75 V ≤ VCC ≤ 5.25 V, TA < 125°C | 6 | ||
| Change in magnitude of driver differential output voltage | Δ/VOD/ | -50 | 0 | 50 | mV | RL = 54 Ω | 6 |
| Steady-state common-mode output voltage | VOC(SS) | 1 | 3 | V | 6 | ||
| Peak-to-peak driver common-mode output voltage | VOC(PP) | 500 | mV | Center of two 27-Ω load resistors, see Figure 7 | 6 | ||
| Positive-going receiver differential input voltage threshold | VIT+ | -100 | -35 | mV | 6 | ||
| Negative-going receiver differential input voltage threshold | VIT- | -180 | -150 | mV | 6 | ||
| Receiver differential input voltage threshold hysteresis | VHYS | 30 | 50 | mV | (VIT+, VIT-) | 6 | |
| Receiver high-level output voltage | VOH | 2.4 | V | IOH = -8 mA; max is VCC, 0.3 V | 6 | ||
| Receiver low-level output voltage | VOL | 0.2 | 0.4 | V | IOL = 8 mA, TA < 85°C | 6 | |
| Receiver low-level output voltage | VOL | 0.5 | V | IOL = 8 mA, TA < 125°C | 6 | ||
| Driver input, driver enable, and receiver enable input current | II(LOGIC) | -50 | 50 | μA | 6 | ||
| Receiver output high-impedance current | IOZ | -1 | 1 | μA | VO = 0 V or VCC, RE at VCC | 6 | |
| Driver short-circuit output current | IOS | -200 | 200 | mA | 6 | ||
| Bus input current (disabled driver), VI = 12 V | II(BUS) | 400 | 500 | μA | VCC = 3.15 to 5.5 V or VCC = 0 V, DE at 0 V, VI = 12 V | 6 | |
| Bus input current (disabled driver), VI = -7 V | II(BUS) | -400 | -300 | μA | VCC = 3.15 to 5.5 V or VCC = 0 V, DE at 0 V, VI = -7 V | 6 | |
| Supply current (quiescent), driver and receiver enabled | ICC | 4 | 6 | mA | DE = VCC, RE = GND, no load | 6 | |
| Supply current (quiescent), driver enabled, receiver disabled | ICC | 3 | 5 | mA | DE = VCC, RE = VCC, no load | 6 | |
| Supply current (quiescent), driver disabled, receiver enabled | ICC | 2 | 4 | mA | DE = GND, RE = GND, no load | 6 | |
| Supply current, standby mode | ICC | 0.15 | 1 | μA | DE = GND, D = open, RE = VCC, no load, TA < 85°C | 6 | |
| Supply current, standby mode | ICC | 12 | μA | DE = GND, D = open, RE = VCC, no load, TA < 125°C | 6 | ||
| Driver differential output rise or fall time | tr, tf | 50 | ns | RL = 54 Ω, CL = 50 pF, all VCC and temperature | 7 | ||
| Driver differential output rise or fall time | tr, tf | 16 | ns | RL = 54 Ω, CL = 50 pF, VCC > 4.5 V and TA < 105°C | 7 | ||
| Driver disable time | tPHZ, tPLZ | 3 | µs | See Figure 9 and Figure 10 | 7 | ||
| Driver enable time, receiver enabled | tPZH, tPZL | 300 | ns | See Figure 9 and Figure 10 | 8 | ||
| Driver enable time, receiver disabled | tPZH, tPZL | 9 | µs | See Figure 9 and Figure 10 | 8 | ||
| Receiver output rise or fall time | tr, tf | 4 | 15 | ns | CL = 15 pF, see Figure 11, all devices | 8 | |
| Receiver propagation delay time, SN65HVD1782 | tPHL, tPLH | 80 | ns | CL = 15 pF, see Figure 11 | 8 | ||
| Receiver disable time | tPLZ, tPHZ | 15 | 100 | ns | Driver enabled, see Figure 12 | 8 | |
| Receiver enable time, driver enabled | tPZL, tPZH | 80 | 300 | ns | Driver enabled, see Figure 12 | 8 |
CAD (KiCad official)
- Symbol:
SN65HVD1782D - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOIC-8 (KiCad packages3D, STEP)
- 3D model files:
sn65hvd1782d-etched.step/sn65hvd1782d-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);sn65hvd1782d.step/sn65hvd1782d.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (34 pp, sha256
f8736dab94b48730, retrieved 2026-11-06, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).