component
SN65HVD1050
Public Made by Adomby adom
TI CAN transceiver, SOIC-8. ISO 11898, up to 1 Mbps, +/-14 kV ESD, standby mode. Datasheet-verified.
← Commit history
sn65hvd1050: backfill missing artifacts (etch, variants)
3 files changed
+22179−5
diff truncated
README.md+2@@ -31,6 +31,8 @@ Physical-layer interface between a CAN controller and a two-wire CAN bus, meetin ## Ordering variants +Same part, different packaging or reel option.+ - `SN65HVD1050D (SOIC-8, tube)` - `SN65HVD1050DR (SOIC-8, tape & reel)`
page.json+16−5@@ -36,7 +36,7 @@ "number": "1", "name": "TXD", "type": "input",- "description": "CAN transmit data input from local protocol controller. LOW drives the bus into the dominant state; HIGH releases it to the recessive state. A dominant time-out circuit disables the driver if TXD is held low longer than t(dom) (280-700 \u00b5s) to prevent bus lockup."+ "description": "CAN transmit data input from local protocol controller. LOW drives the bus into the dominant state; HIGH releases it to the recessive state. A dominant time-out circuit disables the driver if TXD is held low longer than t(dom) (280-700 µs) to prevent bus lockup." }, { "number": "2",@@ -54,7 +54,7 @@ "number": "4", "name": "RXD", "type": "output",- "description": "CAN receive data output to local protocol controller. LOW indicates a dominant bus state; HIGH indicates a recessive bus state. Push-pull CMOS output (VOH \u2265 3.8 V at -2 mA, VOL \u2264 0.4 V at 2 mA)."+ "description": "CAN receive data output to local protocol controller. LOW indicates a dominant bus state; HIGH indicates a recessive bus state. Push-pull CMOS output (VOH ≥ 3.8 V at -2 mA, VOL ≤ 0.4 V at 2 mA)." }, { "number": "5",@@ -66,13 +66,13 @@ "number": "6", "name": "CANL", "type": "bidirectional",- "description": "Low-level CAN bus line. Differential I/O pin driven low in the dominant state and biased to VCC/2 in the recessive state. Withstands -27 V to 40 V DC and \u00b1200 V transients per ISO 7637."+ "description": "Low-level CAN bus line. Differential I/O pin driven low in the dominant state and biased to VCC/2 in the recessive state. Withstands -27 V to 40 V DC and ±200 V transients per ISO 7637." }, { "number": "7", "name": "CANH", "type": "bidirectional",- "description": "High-level CAN bus line. Differential I/O pin driven high in the dominant state and biased to VCC/2 in the recessive state. Withstands -27 V to 40 V DC and \u00b1200 V transients per ISO 7637."+ "description": "High-level CAN bus line. Differential I/O pin driven high in the dominant state and biased to VCC/2 in the recessive state. Withstands -27 V to 40 V DC and ±200 V transients per ISO 7637." }, { "number": "8",@@ -147,6 +147,17 @@ "docs/hero.png", "docs/sn65hvd1050-datasheet.pdf", "viewers/symbol.html",- "viewers/footprint.html"+ "viewers/footprint.html",+ "sn65hvd1050-etched.step"+ ],+ "variants": [+ {+ "mpn": "SN65HVD1050D (SOIC-8, tube)",+ "kind": "packaging"+ },+ {+ "mpn": "SN65HVD1050DR (SOIC-8, tape & reel)",+ "kind": "packaging"+ } ] }
sn65hvd1050-etched.stepadded+22161@@ -0,0 +1,54159 @@+ISO-10303-21;+HEADER;+FILE_DESCRIPTION(('Open CASCADE Model'),'2;1');+FILE_NAME('Open CASCADE Shape Model','2026-09-03T23:24:24',('Author'),(+ 'Open CASCADE'),'Open CASCADE STEP processor 7.9','Open CASCADE 7.9'+ ,'Unknown');+FILE_SCHEMA(('AUTOMOTIVE_DESIGN { 1 0 10303 214 1 1 1 1 }'));+ENDSEC;+DATA;+#1 = APPLICATION_PROTOCOL_DEFINITION('international standard',+ 'automotive_design',2000,#2);+#2 = APPLICATION_CONTEXT(+ 'core data for automotive mechanical design processes');+#3 = SHAPE_DEFINITION_REPRESENTATION(#4,#10);+#4 = PRODUCT_DEFINITION_SHAPE('','',#5);+#5 = PRODUCT_DEFINITION('design','',#6,#9);+#6 = PRODUCT_DEFINITION_FORMATION('','',#7);+#7 = PRODUCT('part','part','',(#8));+#8 = PRODUCT_CONTEXT('',#2,'mechanical');+#9 = PRODUCT_DEFINITION_CONTEXT('part definition',#2,'design');+#10 = SHAPE_REPRESENTATION('',(#11,#15,#19),#23);+#11 = AXIS2_PLACEMENT_3D('',#12,#13,#14);+#12 = CARTESIAN_POINT('',(0.,0.,0.));+#13 = DIRECTION('',(0.,0.,1.));+#14 = DIRECTION('',(1.,0.,-0.));+#15 = AXIS2_PLACEMENT_3D('',#16,#17,#18);+#16 = CARTESIAN_POINT('',(0.,0.,0.));+#17 = DIRECTION('',(0.,0.,1.));+#18 = DIRECTION('',(1.,0.,-0.));+#19 = AXIS2_PLACEMENT_3D('',#20,#21,#22);+#20 = CARTESIAN_POINT('',(0.,0.,0.));+#21 = DIRECTION('',(0.,0.,1.));+#22 = DIRECTION('',(1.,0.,-0.));+#23 = ( GEOMETRIC_REPRESENTATION_CONTEXT(3) +GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT((#27)) GLOBAL_UNIT_ASSIGNED_CONTEXT(+(#24,#25,#26)) REPRESENTATION_CONTEXT('Context #1',+ '3D Context with UNIT and UNCERTAINTY') );+#24 = ( LENGTH_UNIT() NAMED_UNIT(*) SI_UNIT(.MILLI.,.METRE.) );+#25 = ( NAMED_UNIT(*) PLANE_ANGLE_UNIT() SI_UNIT($,.RADIAN.) );+#26 = ( NAMED_UNIT(*) SI_UNIT($,.STERADIAN.) SOLID_ANGLE_UNIT() );+#27 = UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(1.E-06),#24,+ 'distance_accuracy_value','confusion accuracy');+#28 = PRODUCT_RELATED_PRODUCT_CATEGORY('part',$,(#7));+#29 = SHAPE_DEFINITION_REPRESENTATION(#30,#36);+#30 = PRODUCT_DEFINITION_SHAPE('','',#31);+#31 = PRODUCT_DEFINITION('design','',#32,#35);+#32 = PRODUCT_DEFINITION_FORMATION('','',#33);+#33 = PRODUCT('body','body','',(#34));+#34 = PRODUCT_CONTEXT('',#2,'mechanical');+#35 = PRODUCT_DEFINITION_CONTEXT('part definition',#2,'design');+#36 = ADVANCED_BREP_SHAPE_REPRESENTATION('',(#11,#37),#26566);+#37 = MANIFOLD_SOLID_BREP('',#38);+#38 = CLOSED_SHELL('',(#39,#156,#235,#538,#617,#696,#775,#1073,#1156,+ #2396,#2469,#7768,#7844,#8467,#8494,#8521,#8548,#8575,#8602,#8629,+ #8656,#8683,#8710,#8737,#8764,#8791,#8818,#8845,#8872,#8899,#8926,+ #8953,#8980,#9007,#9034,#9061,#9088,#9115,#9142,#9169,#9176,#9252,+ #9461,#9488,#9515,#9542,#9569,#9596,#9623,#9650,#9677,#9684,#9760,+ #10372,#10454,#10677,#10704,#10731,#10758,#10785,#10812,#10839,+ #10846,#10873,#10900,#10927,#10954,#10981,#11008,#11035,#11062,+ #11089,#11116,#11143,#11170,#11197,#11224,#11251,#11258,#11334,+ #11819,#11846,#11873,#11900,#11927,#11954,#11981,#12008,#12035,+ #12062,#12089,#12116,#12143,#12170,#12197,#12224,#12251,#12278,+ #12305,#12332,#12359,#12366,#12442,#12697,#12724,#12751,#12778,+ #12805,#12832,#12859,#12886,#12913,#12940,#12967,#12974,#13050,+ #13190,#13217,#13244,#13271,#13298,#13325,#13332,#13408,#13754,+ #13828,#13988,#14015,#14042,#14069,#14096,#14123,#14130,#14157,+ #14184,#14211,#14238,#14265,#14272,#14348,#14580,#14607,#14634,+ #14661,#14688,#14715,#14742,#14769,#14796,#14823,#14830,#14906,+ #15311,#15402,#15906,#15982,#16145,#16172,#16199,#16226,#16253,+ #16280,#16307,#16314,#16341,#16368,#16395,#16422,#16449,#16476,+ #16483,#16510,#16537,#16564,#16591,#16618,#16645,#16652,#16728,+ #17213,#17240,#17267,#17294,#17321,#17348,#17375,#17402,#17429,+ #17456,#17483,#17510,#17537,#17564,#17591,#17618,#17645,#17672,+ #17699,#17726,#17753,#17760,#17836,#18241,#18332,#18836,#18912,+ #19075,#19102,#19129,#19156,#19183,#19210,#19237,#19244,#19271,+ #19298,#19325,#19352,#19379,#19406,#19413,#19440,#19467,#19494,+ #19521,#19548,#19575,#19582,#19608,#19634,#19660,#19686,#19712,+ #19738,#19745,#20050,#20121,#20175,#20224,#20273,#20322,#20372,+ #20421,#20475,#20503,#20558,#20863,#20934,#20988,#21037,#21086,+ #21135,#21185,#21234,#21288,#21316,#21371,#21676,#21747,#21801,+ #21850,#21899,#21948,#21998,#22047,#22101,#22129,#22184,#22489,+ #22560,#22614,#22663,#22712,#22761,#22811,#22860,#22914,#22942,+ #22997,#23302,#23373,#23427,#23476,#23525,#23574,#23624,#23673,+ #23727,#23755,#23810,#24115,#24186,#24240,#24289,#24338,#24387,+ #24437,#24486,#24540,#24568,#24623,#24928,#24999,#25053,#25102,+ #25151,#25200,#25250,#25299,#25353,#25381,#25436,#25741,#25812,+ #25866,#25915,#25964,#26013,#26063,#26112,#26166,#26194,#26229,+ #26273,#26280,#26287,#26294,#26301,#26308,#26315,#26322,#26346,+ #26370,#26394,#26418,#26425,#26432,#26439,#26446,#26453,#26460,+ #26467,#26474,#26498,#26522,#26529,#26555));+#39 = ADVANCED_FACE('',(#40),#54,.F.);+#40 = FACE_BOUND('',#41,.F.);+#41 = EDGE_LOOP('',(#42,#76,#103,#131));+#42 = ORIENTED_EDGE('',*,*,#43,.T.);+#43 = EDGE_CURVE('',#44,#46,#48,.T.);+#44 = VERTEX_POINT('',#45);+#45 = CARTESIAN_POINT('',(-1.717585640382,2.335171280765,0.1));+#46 = VERTEX_POINT('',#47);+#47 = CARTESIAN_POINT('',(1.717585640382,2.335171280765,0.1));+#48 = SURFACE_CURVE('',#49,(#53,#64),.PCURVE_S1.);+#49 = LINE('',#50,#51);+#50 = CARTESIAN_POINT('',(-1.717585640382,2.335171280765,0.1));+#51 = VECTOR('',#52,1.);+#52 = DIRECTION('',(1.,1.110223024625E-16,0.));+#53 = PCURVE('',#54,#59);+#54 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,(+ (#55,#56)+ ,(#57,#58)),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,3.55),(0.,1.),+ .PIECEWISE_BEZIER_KNOTS.);+#55 = CARTESIAN_POINT('',(-1.717585640382,2.335171280765,0.1));+#56 = CARTESIAN_POINT('',(-1.775,2.45,0.825));+#57 = CARTESIAN_POINT('',(1.717585640382,2.335171280765,0.1));+#58 = CARTESIAN_POINT('',(1.775,2.45,0.825));+#59 = DEFINITIONAL_REPRESENTATION('',(#60),#63);+#60 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#61,#62),.UNSPECIFIED.,.F.,.F.,(2,+ 2),(0.,3.435171280764),.PIECEWISE_BEZIER_KNOTS.);+#61 = CARTESIAN_POINT('',(-1.0532603443E-16,-8.741167926555E-17));+#62 = CARTESIAN_POINT('',(3.55,2.72692595899E-17));+#63 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#64 = PCURVE('',#65,#70);+#65 = PLANE('',#66);+#66 = AXIS2_PLACEMENT_3D('',#67,#68,#69);+#67 = CARTESIAN_POINT('',(-1.717585640382,2.335171280765,0.1));+#68 = DIRECTION('',(0.,0.,1.));+#69 = DIRECTION('',(0.592513131498,-0.805560791625,0.));+#70 = DEFINITIONAL_REPRESENTATION('',(#71),#75);+#71 = LINE('',#72,#73);+#72 = CARTESIAN_POINT('',(0.,0.));+#73 = VECTOR('',#74,1.);+#74 = DIRECTION('',(0.592513131498,0.805560791625));+#75 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#76 = ORIENTED_EDGE('',*,*,#77,.T.);+#77 = EDGE_CURVE('',#46,#78,#80,.T.);+#78 = VERTEX_POINT('',#79);+#79 = CARTESIAN_POINT('',(1.775,2.45,0.825));+#80 = SURFACE_CURVE('',#81,(#84,#91),.PCURVE_S1.);+#81 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#82,#83),.UNSPECIFIED.,.F.,.F.,(2,+ 2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#82 = CARTESIAN_POINT('',(1.717585640382,2.335171280765,0.1));+#83 = CARTESIAN_POINT('',(1.775,2.45,0.825));+#84 = PCURVE('',#54,#85);+#85 = DEFINITIONAL_REPRESENTATION('',(#86),#90);+#86 = LINE('',#87,#88);+#87 = CARTESIAN_POINT('',(3.55,-1.047195745689E-16));+#88 = VECTOR('',#89,1.);+#89 = DIRECTION('',(0.,1.));+#90 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#91 = PCURVE('',#92,#97);+#92 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,(+ (#93,#94)+ ,(#95,#96+ )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,0.247487373415),(0.,1.)+ ,.PIECEWISE_BEZIER_KNOTS.);+#93 = CARTESIAN_POINT('',(1.717585640382,2.335171280765,0.1));+#94 = CARTESIAN_POINT('',(1.775,2.45,0.825));+#95 = CARTESIAN_POINT('',(1.835171280765,2.217585640382,0.1));+#96 = CARTESIAN_POINT('',(1.95,2.275,0.825));+#97 = DEFINITIONAL_REPRESENTATION('',(#98),#102);+#98 = LINE('',#99,#100);+#99 = CARTESIAN_POINT('',(-9.626040581803E-17,4.809026301013E-18));+#100 = VECTOR('',#101,1.);+#101 = DIRECTION('',(1.762446947573E-16,1.));+#102 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#103 = ORIENTED_EDGE('',*,*,#104,.F.);+#104 = EDGE_CURVE('',#105,#78,#107,.T.);+#105 = VERTEX_POINT('',#106);+#106 = CARTESIAN_POINT('',(-1.775,2.45,0.825));+#107 = SURFACE_CURVE('',#108,(#112,#119),.PCURVE_S1.);+#108 = LINE('',#109,#110);+#109 = CARTESIAN_POINT('',(-1.775,2.45,0.825));+#110 = VECTOR('',#111,1.);+#111 = DIRECTION('',(1.,1.110223024625E-16,0.));+#112 = PCURVE('',#54,#113);+#113 = DEFINITIONAL_REPRESENTATION('',(#114),#118);+#114 = LINE('',#115,#116);+#115 = CARTESIAN_POINT('',(2.189308472908E-16,1.));+#116 = VECTOR('',#117,1.);+#117 = DIRECTION('',(1.,3.127388801761E-17));+#118 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#119 = PCURVE('',#120,#125);+#120 = PLANE('',#121);+#121 = AXIS2_PLACEMENT_3D('',#122,#123,#124);+#122 = CARTESIAN_POINT('',(-1.775,2.45,1.025));+#123 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#124 = DIRECTION('',(1.,1.110223024625E-16,0.));+#125 = DEFINITIONAL_REPRESENTATION('',(#126),#130);+#126 = LINE('',#127,#128);+#127 = CARTESIAN_POINT('',(0.,-0.2));+#128 = VECTOR('',#129,1.);+#129 = DIRECTION('',(1.,0.));+#130 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#131 = ORIENTED_EDGE('',*,*,#132,.F.);+#132 = EDGE_CURVE('',#44,#105,#133,.T.);+#133 = SURFACE_CURVE('',#134,(#137,#144),.PCURVE_S1.);+#134 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#135,#136),.UNSPECIFIED.,.F.,.F.,+ (2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#135 = CARTESIAN_POINT('',(-1.717585640382,2.335171280765,0.1));+#136 = CARTESIAN_POINT('',(-1.775,2.45,0.825));+#137 = PCURVE('',#54,#138);+#138 = DEFINITIONAL_REPRESENTATION('',(#139),#143);+#139 = LINE('',#140,#141);+#140 = CARTESIAN_POINT('',(-1.0532603443E-16,-8.741167926555E-17));+#141 = VECTOR('',#142,1.);+#142 = DIRECTION('',(1.022122767958E-16,1.));+#143 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#144 = PCURVE('',#145,#150);+#145 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,(+ (#146,#147)+ ,(#148,#149+ )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,0.247487373415),(0.,1.)+ ,.PIECEWISE_BEZIER_KNOTS.);+#146 = CARTESIAN_POINT('',(-1.835171280765,2.217585640382,0.1));+#147 = CARTESIAN_POINT('',(-1.95,2.275,0.825));+#148 = CARTESIAN_POINT('',(-1.717585640382,2.335171280765,0.1));+#149 = CARTESIAN_POINT('',(-1.775,2.45,0.825));+#150 = DEFINITIONAL_REPRESENTATION('',(#151),#155);+#151 = LINE('',#152,#153);+#152 = CARTESIAN_POINT('',(0.247487373415,3.834137462134E-17));+#153 = VECTOR('',#154,1.);+#154 = DIRECTION('',(-3.608224830032E-16,1.));+#155 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#156 = ADVANCED_FACE('',(#157),#145,.F.);+#157 = FACE_BOUND('',#158,.F.);+#158 = EDGE_LOOP('',(#159,#181,#182,#210));+#159 = ORIENTED_EDGE('',*,*,#160,.T.);+#160 = EDGE_CURVE('',#161,#44,#163,.T.);+#161 = VERTEX_POINT('',#162);+#162 = CARTESIAN_POINT('',(-1.835171280765,2.217585640382,0.1));+#163 = SURFACE_CURVE('',#164,(#168,#174),.PCURVE_S1.);+#164 = LINE('',#165,#166);+#165 = CARTESIAN_POINT('',(-1.835171280765,2.217585640382,0.1));+#166 = VECTOR('',#167,1.);+#167 = DIRECTION('',(0.707106781187,0.707106781187,0.));+#168 = PCURVE('',#145,#169);+#169 = DEFINITIONAL_REPRESENTATION('',(#170),#173);+#170 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#171,#172),.UNSPECIFIED.,.F.,.F.,+ (2,2),(0.,0.16629120737),.PIECEWISE_BEZIER_KNOTS.);+#171 = CARTESIAN_POINT('',(3.707552905462E-16,1.10118465575E-18));+#172 = CARTESIAN_POINT('',(0.247487373415,4.809026249314E-18));+#173 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#174 = PCURVE('',#65,#175);+#175 = DEFINITIONAL_REPRESENTATION('',(#176),#180);+#176 = LINE('',#177,#178);+#177 = CARTESIAN_POINT('',(2.505134554812E-02,-0.164393417553));+#178 = VECTOR('',#179,1.);+#179 = DIRECTION('',(-0.150647445192,0.98858755164));+#180 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#181 = ORIENTED_EDGE('',*,*,#132,.T.);+#182 = ORIENTED_EDGE('',*,*,#183,.F.);+#183 = EDGE_CURVE('',#184,#105,#186,.T.);+#184 = VERTEX_POINT('',#185);+#185 = CARTESIAN_POINT('',(-1.95,2.275,0.825));+#186 = SURFACE_CURVE('',#187,(#191,#198),.PCURVE_S1.);+#187 = LINE('',#188,#189);+#188 = CARTESIAN_POINT('',(-1.95,2.275,0.825));+#189 = VECTOR('',#190,1.);+#190 = DIRECTION('',(0.707106781187,0.707106781187,0.));+#191 = PCURVE('',#145,#192);+#192 = DEFINITIONAL_REPRESENTATION('',(#193),#197);+#193 = LINE('',#194,#195);+#194 = CARTESIAN_POINT('',(7.999472487695E-17,1.));+#195 = VECTOR('',#196,1.);+#196 = DIRECTION('',(1.,0.));+#197 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#198 = PCURVE('',#199,#204);+#199 = PLANE('',#200);+#200 = AXIS2_PLACEMENT_3D('',#201,#202,#203);+#201 = CARTESIAN_POINT('',(-1.95,2.275,1.025));+#202 = DIRECTION('',(0.707106781187,-0.707106781187,0.));+#203 = DIRECTION('',(0.707106781187,0.707106781187,0.));+#204 = DEFINITIONAL_REPRESENTATION('',(#205),#209);+#205 = LINE('',#206,#207);+#206 = CARTESIAN_POINT('',(0.,-0.2));+#207 = VECTOR('',#208,1.);+#208 = DIRECTION('',(1.,0.));+#209 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#210 = ORIENTED_EDGE('',*,*,#211,.F.);+#211 = EDGE_CURVE('',#161,#184,#212,.T.);+#212 = SURFACE_CURVE('',#213,(#216,#223),.PCURVE_S1.);+#213 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#214,#215),.UNSPECIFIED.,.F.,.F.,+ (2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#214 = CARTESIAN_POINT('',(-1.835171280765,2.217585640382,0.1));+#215 = CARTESIAN_POINT('',(-1.95,2.275,0.825));+#216 = PCURVE('',#145,#217);+#217 = DEFINITIONAL_REPRESENTATION('',(#218),#222);+#218 = LINE('',#219,#220);+#219 = CARTESIAN_POINT('',(3.707552905462E-16,1.10118465575E-18));+#220 = VECTOR('',#221,1.);+#221 = DIRECTION('',(-4.463333469861E-16,1.));+#222 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#223 = PCURVE('',#224,#229);+#224 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,(+ (#225,#226)+ ,(#227,#228+ )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,4.55),(0.,1.),+ .PIECEWISE_BEZIER_KNOTS.);+#225 = CARTESIAN_POINT('',(-1.835171280765,-2.217585640382,0.1));+#226 = CARTESIAN_POINT('',(-1.95,-2.275,0.825));+#227 = CARTESIAN_POINT('',(-1.835171280765,2.217585640382,0.1));+#228 = CARTESIAN_POINT('',(-1.95,2.275,0.825));+#229 = DEFINITIONAL_REPRESENTATION('',(#230),#234);+#230 = LINE('',#231,#232);+#231 = CARTESIAN_POINT('',(4.55,-5.031297844791E-18));+#232 = VECTOR('',#233,1.);+#233 = DIRECTION('',(0.,1.));+#234 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#235 = ADVANCED_FACE('',(#236),#224,.F.);+#236 = FACE_BOUND('',#237,.F.);+#237 = EDGE_LOOP('',(#238,#260,#261,#289,#317,#345,#373,#401,#429,#457,+ #485,#513));+#238 = ORIENTED_EDGE('',*,*,#239,.T.);+#239 = EDGE_CURVE('',#240,#161,#242,.T.);+#240 = VERTEX_POINT('',#241);+#241 = CARTESIAN_POINT('',(-1.835171280765,-2.217585640382,0.1));+#242 = SURFACE_CURVE('',#243,(#247,#253),.PCURVE_S1.);+#243 = LINE('',#244,#245);+#244 = CARTESIAN_POINT('',(-1.835171280765,-2.217585640382,0.1));+#245 = VECTOR('',#246,1.);+#246 = DIRECTION('',(-1.110223024625E-16,1.,0.));+#247 = PCURVE('',#224,#248);+#248 = DEFINITIONAL_REPRESENTATION('',(#249),#252);+#249 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#250,#251),.UNSPECIFIED.,.F.,.F.,+ (2,2),(0.,4.435171280764),.PIECEWISE_BEZIER_KNOTS.);+#250 = CARTESIAN_POINT('',(-5.279026112648E-16,-7.468886720343E-18));+#251 = CARTESIAN_POINT('',(4.55,1.070087642278E-16));+#252 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#253 = PCURVE('',#65,#254);+#254 = DEFINITIONAL_REPRESENTATION('',(#255),#259);+#255 = LINE('',#256,#257);+#256 = CARTESIAN_POINT('',(3.597851433471,-2.792290641847));+#257 = VECTOR('',#258,1.);+#258 = DIRECTION('',(-0.805560791625,0.592513131498));+#259 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#260 = ORIENTED_EDGE('',*,*,#211,.T.);+#261 = ORIENTED_EDGE('',*,*,#262,.F.);+#262 = EDGE_CURVE('',#263,#184,#265,.T.);+#263 = VERTEX_POINT('',#264);+#264 = CARTESIAN_POINT('',(-1.95,2.11,0.825));+#265 = SURFACE_CURVE('',#266,(#270,#277),.PCURVE_S1.);+#266 = LINE('',#267,#268);+#267 = CARTESIAN_POINT('',(-1.95,-2.275,0.825));+#268 = VECTOR('',#269,1.);+#269 = DIRECTION('',(-1.110223024625E-16,1.,0.));+#270 = PCURVE('',#224,#271);+#271 = DEFINITIONAL_REPRESENTATION('',(#272),#276);+#272 = LINE('',#273,#274);+#273 = CARTESIAN_POINT('',(8.881784197001E-16,1.));+#274 = VECTOR('',#275,1.);+#275 = DIRECTION('',(1.,1.345724878334E-15));+#276 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#277 = PCURVE('',#278,#283);+#278 = PLANE('',#279);+#279 = AXIS2_PLACEMENT_3D('',#280,#281,#282);+#280 = CARTESIAN_POINT('',(-1.95,-2.275,1.025));+#281 = DIRECTION('',(1.,1.110223024625E-16,0.));+#282 = DIRECTION('',(-1.110223024625E-16,1.,0.));+#283 = DEFINITIONAL_REPRESENTATION('',(#284),#288);+#284 = LINE('',#285,#286);+#285 = CARTESIAN_POINT('',(0.,-0.2));+#286 = VECTOR('',#287,1.);+#287 = DIRECTION('',(1.,0.));+#288 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#289 = ORIENTED_EDGE('',*,*,#290,.F.);+#290 = EDGE_CURVE('',#291,#263,#293,.T.);+#291 = VERTEX_POINT('',#292);+#292 = CARTESIAN_POINT('',(-1.95,1.7,0.825));+#293 = SURFACE_CURVE('',#294,(#298,#305),.PCURVE_S1.);+#294 = LINE('',#295,#296);+#295 = CARTESIAN_POINT('',(-1.95,-2.275,0.825));+#296 = VECTOR('',#297,1.);+#297 = DIRECTION('',(-1.110223024625E-16,1.,0.));+#298 = PCURVE('',#224,#299);+#299 = DEFINITIONAL_REPRESENTATION('',(#300),#304);+#300 = LINE('',#301,#302);+#301 = CARTESIAN_POINT('',(4.440892098501E-16,1.));+#302 = VECTOR('',#303,1.);+#303 = DIRECTION('',(1.,5.415722071342E-16));+#304 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#305 = PCURVE('',#306,#311);+#306 = PLANE('',#307);+#307 = AXIS2_PLACEMENT_3D('',#308,#309,#310);+#308 = CARTESIAN_POINT('',(-1.8,1.7,0.825));+#309 = DIRECTION('',(0.,0.,1.));+#310 = DIRECTION('',(-1.,1.144237745222E-17,0.));+#311 = DEFINITIONAL_REPRESENTATION('',(#312),#316);+#312 = LINE('',#313,#314);+#313 = CARTESIAN_POINT('',(0.15,3.975));+#314 = VECTOR('',#315,1.);+#315 = DIRECTION('',(1.224646799147E-16,-1.));+#316 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#317 = ORIENTED_EDGE('',*,*,#318,.F.);+#318 = EDGE_CURVE('',#319,#291,#321,.T.);+#319 = VERTEX_POINT('',#320);+#320 = CARTESIAN_POINT('',(-1.95,0.84,0.825));+#321 = SURFACE_CURVE('',#322,(#326,#333),.PCURVE_S1.);+#322 = LINE('',#323,#324);+#323 = CARTESIAN_POINT('',(-1.95,-2.275,0.825));+#324 = VECTOR('',#325,1.);+#325 = DIRECTION('',(-1.110223024625E-16,1.,0.));+#326 = PCURVE('',#224,#327);+#327 = DEFINITIONAL_REPRESENTATION('',(#328),#332);+#328 = LINE('',#329,#330);+#329 = CARTESIAN_POINT('',(4.440892098501E-16,1.));+#330 = VECTOR('',#331,1.);+#331 = DIRECTION('',(1.,2.581914010756E-16));+#332 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#333 = PCURVE('',#334,#339);+#334 = PLANE('',#335);+#335 = AXIS2_PLACEMENT_3D('',#336,#337,#338);+#336 = CARTESIAN_POINT('',(-1.95,-2.275,1.025));+#337 = DIRECTION('',(1.,1.110223024625E-16,0.));+#338 = DIRECTION('',(-1.110223024625E-16,1.,0.));+#339 = DEFINITIONAL_REPRESENTATION('',(#340),#344);+#340 = LINE('',#341,#342);+#341 = CARTESIAN_POINT('',(0.,-0.2));+#342 = VECTOR('',#343,1.);+#343 = DIRECTION('',(1.,0.));+#344 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#345 = ORIENTED_EDGE('',*,*,#346,.F.);+#346 = EDGE_CURVE('',#347,#319,#349,.T.);+#347 = VERTEX_POINT('',#348);+#348 = CARTESIAN_POINT('',(-1.95,0.43,0.825));+#349 = SURFACE_CURVE('',#350,(#354,#361),.PCURVE_S1.);+#350 = LINE('',#351,#352);+#351 = CARTESIAN_POINT('',(-1.95,-2.275,0.825));+#352 = VECTOR('',#353,1.);+#353 = DIRECTION('',(-1.110223024625E-16,1.,0.));+#354 = PCURVE('',#224,#355);+#355 = DEFINITIONAL_REPRESENTATION('',(#356),#360);+#356 = LINE('',#357,#358);+#357 = CARTESIAN_POINT('',(4.440892098501E-16,1.));+#358 = VECTOR('',#359,1.);+#359 = DIRECTION('',(1.,5.415722071342E-16));+#360 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#361 = PCURVE('',#362,#367);+#362 = PLANE('',#363);+#363 = AXIS2_PLACEMENT_3D('',#364,#365,#366);+#364 = CARTESIAN_POINT('',(-1.8,0.43,0.825));+#365 = DIRECTION('',(0.,0.,1.));+#366 = DIRECTION('',(-1.,1.144237745222E-17,0.));+#367 = DEFINITIONAL_REPRESENTATION('',(#368),#372);+#368 = LINE('',#369,#370);+#369 = CARTESIAN_POINT('',(0.15,2.705));+#370 = VECTOR('',#371,1.);+#371 = DIRECTION('',(1.224646799147E-16,-1.));+#372 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#373 = ORIENTED_EDGE('',*,*,#374,.F.);+#374 = EDGE_CURVE('',#375,#347,#377,.T.);+#375 = VERTEX_POINT('',#376);+#376 = CARTESIAN_POINT('',(-1.95,-0.43,0.825));+#377 = SURFACE_CURVE('',#378,(#382,#389),.PCURVE_S1.);+#378 = LINE('',#379,#380);+#379 = CARTESIAN_POINT('',(-1.95,-2.275,0.825));+#380 = VECTOR('',#381,1.);+#381 = DIRECTION('',(-1.110223024625E-16,1.,0.));+#382 = PCURVE('',#224,#383);+#383 = DEFINITIONAL_REPRESENTATION('',(#384),#388);+#384 = LINE('',#385,#386);+#385 = CARTESIAN_POINT('',(2.22044604925E-16,1.));+#386 = VECTOR('',#387,1.);+#387 = DIRECTION('',(1.,0.));+#388 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#389 = PCURVE('',#390,#395);+#390 = PLANE('',#391);+#391 = AXIS2_PLACEMENT_3D('',#392,#393,#394);+#392 = CARTESIAN_POINT('',(-1.95,-2.275,1.025));+#393 = DIRECTION('',(1.,1.110223024625E-16,0.));+#394 = DIRECTION('',(-1.110223024625E-16,1.,0.));+#395 = DEFINITIONAL_REPRESENTATION('',(#396),#400);+#396 = LINE('',#397,#398);+#397 = CARTESIAN_POINT('',(0.,-0.2));+#398 = VECTOR('',#399,1.);+#399 = DIRECTION('',(1.,0.));+#400 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#401 = ORIENTED_EDGE('',*,*,#402,.F.);+#402 = EDGE_CURVE('',#403,#375,#405,.T.);+#403 = VERTEX_POINT('',#404);+#404 = CARTESIAN_POINT('',(-1.95,-0.84,0.825));+#405 = SURFACE_CURVE('',#406,(#410,#417),.PCURVE_S1.);+#406 = LINE('',#407,#408);+#407 = CARTESIAN_POINT('',(-1.95,-2.275,0.825));+#408 = VECTOR('',#409,1.);+#409 = DIRECTION('',(-1.110223024625E-16,1.,0.));+#410 = PCURVE('',#224,#411);+#411 = DEFINITIONAL_REPRESENTATION('',(#412),#416);+#412 = LINE('',#413,#414);+#413 = CARTESIAN_POINT('',(2.22044604925E-16,1.));+#414 = VECTOR('',#415,1.);+#415 = DIRECTION('',(1.,0.));+#416 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#417 = PCURVE('',#418,#423);+#418 = PLANE('',#419);+#419 = AXIS2_PLACEMENT_3D('',#420,#421,#422);+#420 = CARTESIAN_POINT('',(-1.8,-0.84,0.825));+#421 = DIRECTION('',(0.,0.,1.));+#422 = DIRECTION('',(-1.,1.144237745222E-17,0.));+#423 = DEFINITIONAL_REPRESENTATION('',(#424),#428);+#424 = LINE('',#425,#426);+#425 = CARTESIAN_POINT('',(0.15,1.435));+#426 = VECTOR('',#427,1.);+#427 = DIRECTION('',(1.224646799147E-16,-1.));+#428 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#429 = ORIENTED_EDGE('',*,*,#430,.F.);+#430 = EDGE_CURVE('',#431,#403,#433,.T.);+#431 = VERTEX_POINT('',#432);+#432 = CARTESIAN_POINT('',(-1.95,-1.7,0.825));+#433 = SURFACE_CURVE('',#434,(#438,#445),.PCURVE_S1.);+#434 = LINE('',#435,#436);+#435 = CARTESIAN_POINT('',(-1.95,-2.275,0.825));+#436 = VECTOR('',#437,1.);+#437 = DIRECTION('',(-1.110223024625E-16,1.,0.));+#438 = PCURVE('',#224,#439);+#439 = DEFINITIONAL_REPRESENTATION('',(#440),#444);+#440 = LINE('',#441,#442);+#441 = CARTESIAN_POINT('',(2.22044604925E-16,1.));+#442 = VECTOR('',#443,1.);+#443 = DIRECTION('',(1.,1.290957005378E-16));+#444 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#445 = PCURVE('',#446,#451);+#446 = PLANE('',#447);+#447 = AXIS2_PLACEMENT_3D('',#448,#449,#450);+#448 = CARTESIAN_POINT('',(-1.95,-2.275,1.025));+#449 = DIRECTION('',(1.,1.110223024625E-16,0.));+#450 = DIRECTION('',(-1.110223024625E-16,1.,0.));+#451 = DEFINITIONAL_REPRESENTATION('',(#452),#456);+#452 = LINE('',#453,#454);+#453 = CARTESIAN_POINT('',(0.,-0.2));+#454 = VECTOR('',#455,1.);+#455 = DIRECTION('',(1.,0.));+#456 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#457 = ORIENTED_EDGE('',*,*,#458,.F.);+#458 = EDGE_CURVE('',#459,#431,#461,.T.);+#459 = VERTEX_POINT('',#460);+#460 = CARTESIAN_POINT('',(-1.95,-2.11,0.825));+#461 = SURFACE_CURVE('',#462,(#466,#473),.PCURVE_S1.);+#462 = LINE('',#463,#464);+#463 = CARTESIAN_POINT('',(-1.95,-2.275,0.825));+#464 = VECTOR('',#465,1.);+#465 = DIRECTION('',(-1.110223024625E-16,1.,0.));+#466 = PCURVE('',#224,#467);+#467 = DEFINITIONAL_REPRESENTATION('',(#468),#472);+#468 = LINE('',#469,#470);+#469 = CARTESIAN_POINT('',(1.110223024625E-16,1.));+#470 = VECTOR('',#471,1.);+#471 = DIRECTION('',(1.,0.));+#472 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#473 = PCURVE('',#474,#479);+#474 = PLANE('',#475);+#475 = AXIS2_PLACEMENT_3D('',#476,#477,#478);+#476 = CARTESIAN_POINT('',(-1.8,-2.11,0.825));+#477 = DIRECTION('',(0.,0.,1.));+#478 = DIRECTION('',(-1.,1.144237745222E-17,0.));+#479 = DEFINITIONAL_REPRESENTATION('',(#480),#484);+#480 = LINE('',#481,#482);+#481 = CARTESIAN_POINT('',(0.15,0.165));+#482 = VECTOR('',#483,1.);+#483 = DIRECTION('',(1.224646799147E-16,-1.));+#484 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#485 = ORIENTED_EDGE('',*,*,#486,.F.);+#486 = EDGE_CURVE('',#487,#459,#489,.T.);+#487 = VERTEX_POINT('',#488);+#488 = CARTESIAN_POINT('',(-1.95,-2.275,0.825));+#489 = SURFACE_CURVE('',#490,(#494,#501),.PCURVE_S1.);+#490 = LINE('',#491,#492);+#491 = CARTESIAN_POINT('',(-1.95,-2.275,0.825));+#492 = VECTOR('',#493,1.);+#493 = DIRECTION('',(-1.110223024625E-16,1.,0.));+#494 = PCURVE('',#224,#495);+#495 = DEFINITIONAL_REPRESENTATION('',(#496),#500);+#496 = LINE('',#497,#498);+#497 = CARTESIAN_POINT('',(1.978430405897E-17,1.));+#498 = VECTOR('',#499,1.);+#499 = DIRECTION('',(1.,-6.728624391668E-16));+#500 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#501 = PCURVE('',#502,#507);+#502 = PLANE('',#503);+#503 = AXIS2_PLACEMENT_3D('',#504,#505,#506);+#504 = CARTESIAN_POINT('',(-1.95,-2.275,1.025));+#505 = DIRECTION('',(1.,1.110223024625E-16,0.));+#506 = DIRECTION('',(-1.110223024625E-16,1.,0.));+#507 = DEFINITIONAL_REPRESENTATION('',(#508),#512);+#508 = LINE('',#509,#510);+#509 = CARTESIAN_POINT('',(0.,-0.2));+#510 = VECTOR('',#511,1.);+#511 = DIRECTION('',(1.,0.));+#512 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#513 = ORIENTED_EDGE('',*,*,#514,.F.);+#514 = EDGE_CURVE('',#240,#487,#515,.T.);+#515 = SURFACE_CURVE('',#516,(#519,#526),.PCURVE_S1.);+#516 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#517,#518),.UNSPECIFIED.,.F.,.F.,+ (2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#517 = CARTESIAN_POINT('',(-1.835171280765,-2.217585640382,0.1));+#518 = CARTESIAN_POINT('',(-1.95,-2.275,0.825));+#519 = PCURVE('',#224,#520);+#520 = DEFINITIONAL_REPRESENTATION('',(#521),#525);+#521 = LINE('',#522,#523);+#522 = CARTESIAN_POINT('',(-5.279026112648E-16,-7.468886720343E-18));+#523 = VECTOR('',#524,1.);+#524 = DIRECTION('',(5.504038244495E-16,1.));+#525 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#526 = PCURVE('',#527,#532);+#527 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,(+ (#528,#529)+ ,(#530,#531+ )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,0.247487373415),(0.,1.)+ ,.PIECEWISE_BEZIER_KNOTS.);+#528 = CARTESIAN_POINT('',(-1.717585640382,-2.335171280765,0.1));+#529 = CARTESIAN_POINT('',(-1.775,-2.45,0.825));+#530 = CARTESIAN_POINT('',(-1.835171280765,-2.217585640382,0.1));+#531 = CARTESIAN_POINT('',(-1.95,-2.275,0.825));+#532 = DEFINITIONAL_REPRESENTATION('',(#533),#537);+#533 = LINE('',#534,#535);+#534 = CARTESIAN_POINT('',(0.247487373415,7.001610398739E-17));+#535 = VECTOR('',#536,1.);+#536 = DIRECTION('',(5.551115123126E-16,1.));+#537 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#538 = ADVANCED_FACE('',(#539),#527,.F.);+#539 = FACE_BOUND('',#540,.F.);+#540 = EDGE_LOOP('',(#541,#563,#564,#592));+#541 = ORIENTED_EDGE('',*,*,#542,.T.);+#542 = EDGE_CURVE('',#543,#240,#545,.T.);+#543 = VERTEX_POINT('',#544);+#544 = CARTESIAN_POINT('',(-1.717585640382,-2.335171280765,0.1));+#545 = SURFACE_CURVE('',#546,(#550,#556),.PCURVE_S1.);+#546 = LINE('',#547,#548);+#547 = CARTESIAN_POINT('',(-1.717585640382,-2.335171280765,0.1));+#548 = VECTOR('',#549,1.);+#549 = DIRECTION('',(-0.707106781187,0.707106781187,0.));+#550 = PCURVE('',#527,#551);+#551 = DEFINITIONAL_REPRESENTATION('',(#552),#555);+#552 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#553,#554),.UNSPECIFIED.,.F.,.F.,+ (2,2),(0.,0.16629120737),.PIECEWISE_BEZIER_KNOTS.);+#553 = CARTESIAN_POINT('',(-9.626040581803E-17,4.809026301013E-18));+#554 = CARTESIAN_POINT('',(0.247487373415,1.101184707449E-18));+#555 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#556 = PCURVE('',#65,#557);+#557 = DEFINITIONAL_REPRESENTATION('',(#558),#562);+#558 = LINE('',#559,#560);+#559 = CARTESIAN_POINT('',(3.762244851024,-2.767239296299));+#560 = VECTOR('',#561,1.);+#561 = DIRECTION('',(-0.98858755164,-0.150647445192));+#562 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#563 = ORIENTED_EDGE('',*,*,#514,.T.);+#564 = ORIENTED_EDGE('',*,*,#565,.F.);+#565 = EDGE_CURVE('',#566,#487,#568,.T.);+#566 = VERTEX_POINT('',#567);+#567 = CARTESIAN_POINT('',(-1.775,-2.45,0.825));+#568 = SURFACE_CURVE('',#569,(#573,#580),.PCURVE_S1.);+#569 = LINE('',#570,#571);+#570 = CARTESIAN_POINT('',(-1.775,-2.45,0.825));+#571 = VECTOR('',#572,1.);+#572 = DIRECTION('',(-0.707106781187,0.707106781187,0.));+#573 = PCURVE('',#527,#574);+#574 = DEFINITIONAL_REPRESENTATION('',(#575),#579);+#575 = LINE('',#576,#577);+#576 = CARTESIAN_POINT('',(-7.846142148017E-17,1.));+#577 = VECTOR('',#578,1.);+#578 = DIRECTION('',(1.,0.));+#579 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#580 = PCURVE('',#581,#586);+#581 = PLANE('',#582);+#582 = AXIS2_PLACEMENT_3D('',#583,#584,#585);+#583 = CARTESIAN_POINT('',(-1.775,-2.45,1.025));+#584 = DIRECTION('',(0.707106781187,0.707106781187,0.));+#585 = DIRECTION('',(-0.707106781187,0.707106781187,0.));+#586 = DEFINITIONAL_REPRESENTATION('',(#587),#591);+#587 = LINE('',#588,#589);+#588 = CARTESIAN_POINT('',(0.,-0.2));+#589 = VECTOR('',#590,1.);+#590 = DIRECTION('',(1.,0.));+#591 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#592 = ORIENTED_EDGE('',*,*,#593,.F.);+#593 = EDGE_CURVE('',#543,#566,#594,.T.);+#594 = SURFACE_CURVE('',#595,(#598,#605),.PCURVE_S1.);+#595 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#596,#597),.UNSPECIFIED.,.F.,.F.,+ (2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#596 = CARTESIAN_POINT('',(-1.717585640382,-2.335171280765,0.1));+#597 = CARTESIAN_POINT('',(-1.775,-2.45,0.825));+#598 = PCURVE('',#527,#599);+#599 = DEFINITIONAL_REPRESENTATION('',(#600),#604);+#600 = LINE('',#601,#602);+#601 = CARTESIAN_POINT('',(-9.626040581803E-17,4.809026301013E-18));+#602 = VECTOR('',#603,1.);+#603 = DIRECTION('',(1.762446947573E-16,1.));+#604 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#605 = PCURVE('',#606,#611);+#606 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,(+ (#607,#608)+ ,(#609,#610+ )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,3.55),(0.,1.),+ .PIECEWISE_BEZIER_KNOTS.);+#607 = CARTESIAN_POINT('',(1.717585640382,-2.335171280765,0.1));+#608 = CARTESIAN_POINT('',(1.775,-2.45,0.825));+#609 = CARTESIAN_POINT('',(-1.717585640382,-2.335171280765,0.1));+#610 = CARTESIAN_POINT('',(-1.775,-2.45,0.825));+#611 = DEFINITIONAL_REPRESENTATION('',(#612),#616);+#612 = LINE('',#613,#614);+#613 = CARTESIAN_POINT('',(3.55,-1.047195745689E-16));+#614 = VECTOR('',#615,1.);+#615 = DIRECTION('',(0.,1.));+#616 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#617 = ADVANCED_FACE('',(#618),#606,.F.);+#618 = FACE_BOUND('',#619,.F.);+#619 = EDGE_LOOP('',(#620,#642,#643,#671));+#620 = ORIENTED_EDGE('',*,*,#621,.T.);+#621 = EDGE_CURVE('',#622,#543,#624,.T.);+#622 = VERTEX_POINT('',#623);+#623 = CARTESIAN_POINT('',(1.717585640382,-2.335171280765,0.1));+#624 = SURFACE_CURVE('',#625,(#629,#635),.PCURVE_S1.);+#625 = LINE('',#626,#627);+#626 = CARTESIAN_POINT('',(1.717585640382,-2.335171280765,0.1));+#627 = VECTOR('',#628,1.);+#628 = DIRECTION('',(-1.,-1.110223024625E-16,0.));+#629 = PCURVE('',#606,#630);+#630 = DEFINITIONAL_REPRESENTATION('',(#631),#634);+#631 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#632,#633),.UNSPECIFIED.,.F.,.F.,+ (2,2),(0.,3.435171280764),.PIECEWISE_BEZIER_KNOTS.);+#632 = CARTESIAN_POINT('',(-1.0532603443E-16,-8.741167926555E-17));+#633 = CARTESIAN_POINT('',(3.55,2.72692595899E-17));+#634 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#635 = PCURVE('',#65,#636);+#636 = DEFINITIONAL_REPRESENTATION('',(#637),#641);+#637 = LINE('',#638,#639);+#638 = CARTESIAN_POINT('',(5.79762894382,-8.180123245438E-13));+#639 = VECTOR('',#640,1.);+#640 = DIRECTION('',(-0.592513131498,-0.805560791625));+#641 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#642 = ORIENTED_EDGE('',*,*,#593,.T.);+#643 = ORIENTED_EDGE('',*,*,#644,.F.);+#644 = EDGE_CURVE('',#645,#566,#647,.T.);+#645 = VERTEX_POINT('',#646);+#646 = CARTESIAN_POINT('',(1.775,-2.45,0.825));+#647 = SURFACE_CURVE('',#648,(#652,#659),.PCURVE_S1.);+#648 = LINE('',#649,#650);+#649 = CARTESIAN_POINT('',(1.775,-2.45,0.825));+#650 = VECTOR('',#651,1.);+#651 = DIRECTION('',(-1.,-1.110223024625E-16,0.));+#652 = PCURVE('',#606,#653);+#653 = DEFINITIONAL_REPRESENTATION('',(#654),#658);+#654 = LINE('',#655,#656);+#655 = CARTESIAN_POINT('',(2.189308472908E-16,1.));+#656 = VECTOR('',#657,1.);+#657 = DIRECTION('',(1.,3.127388801761E-17));+#658 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#659 = PCURVE('',#660,#665);+#660 = PLANE('',#661);+#661 = AXIS2_PLACEMENT_3D('',#662,#663,#664);+#662 = CARTESIAN_POINT('',(1.775,-2.45,1.025));+#663 = DIRECTION('',(-1.110223024625E-16,1.,0.));+#664 = DIRECTION('',(-1.,-1.110223024625E-16,0.));+#665 = DEFINITIONAL_REPRESENTATION('',(#666),#670);+#666 = LINE('',#667,#668);+#667 = CARTESIAN_POINT('',(-0.,-0.2));+#668 = VECTOR('',#669,1.);+#669 = DIRECTION('',(1.,0.));+#670 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#671 = ORIENTED_EDGE('',*,*,#672,.F.);+#672 = EDGE_CURVE('',#622,#645,#673,.T.);+#673 = SURFACE_CURVE('',#674,(#677,#684),.PCURVE_S1.);+#674 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#675,#676),.UNSPECIFIED.,.F.,.F.,+ (2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#675 = CARTESIAN_POINT('',(1.717585640382,-2.335171280765,0.1));+#676 = CARTESIAN_POINT('',(1.775,-2.45,0.825));+#677 = PCURVE('',#606,#678);+#678 = DEFINITIONAL_REPRESENTATION('',(#679),#683);+#679 = LINE('',#680,#681);+#680 = CARTESIAN_POINT('',(-1.0532603443E-16,-8.741167926555E-17));+#681 = VECTOR('',#682,1.);+#682 = DIRECTION('',(1.022122767958E-16,1.));+#683 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#684 = PCURVE('',#685,#690);+#685 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,(+ (#686,#687)+ ,(#688,#689+ )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,0.247487373415),(0.,1.)+ ,.PIECEWISE_BEZIER_KNOTS.);+#686 = CARTESIAN_POINT('',(1.835171280765,-2.217585640382,0.1));+#687 = CARTESIAN_POINT('',(1.95,-2.275,0.825));+#688 = CARTESIAN_POINT('',(1.717585640382,-2.335171280765,0.1));+#689 = CARTESIAN_POINT('',(1.775,-2.45,0.825));+#690 = DEFINITIONAL_REPRESENTATION('',(#691),#695);+#691 = LINE('',#692,#693);+#692 = CARTESIAN_POINT('',(0.247487373415,3.834137462134E-17));+#693 = VECTOR('',#694,1.);+#694 = DIRECTION('',(-3.608224830032E-16,1.));+#695 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#696 = ADVANCED_FACE('',(#697),#685,.F.);+#697 = FACE_BOUND('',#698,.F.);+#698 = EDGE_LOOP('',(#699,#721,#722,#750));+#699 = ORIENTED_EDGE('',*,*,#700,.T.);+#700 = EDGE_CURVE('',#701,#622,#703,.T.);+#701 = VERTEX_POINT('',#702);+#702 = CARTESIAN_POINT('',(1.835171280765,-2.217585640382,0.1));+#703 = SURFACE_CURVE('',#704,(#708,#714),.PCURVE_S1.);+#704 = LINE('',#705,#706);+#705 = CARTESIAN_POINT('',(1.835171280765,-2.217585640382,0.1));+#706 = VECTOR('',#707,1.);+#707 = DIRECTION('',(-0.707106781187,-0.707106781187,0.));+#708 = PCURVE('',#685,#709);+#709 = DEFINITIONAL_REPRESENTATION('',(#710),#713);+#710 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#711,#712),.UNSPECIFIED.,.F.,.F.,+ (2,2),(0.,0.16629120737),.PIECEWISE_BEZIER_KNOTS.);+#711 = CARTESIAN_POINT('',(3.707552905462E-16,1.10118465575E-18));+#712 = CARTESIAN_POINT('',(0.247487373415,4.809026249314E-18));+#713 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#714 = PCURVE('',#65,#715);+#715 = DEFINITIONAL_REPRESENTATION('',(#716),#720);+#716 = LINE('',#717,#718);+#717 = CARTESIAN_POINT('',(5.772577598272,0.164393417552));+#718 = VECTOR('',#719,1.);+#719 = DIRECTION('',(0.150647445192,-0.98858755164));+#720 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#721 = ORIENTED_EDGE('',*,*,#672,.T.);+#722 = ORIENTED_EDGE('',*,*,#723,.F.);+#723 = EDGE_CURVE('',#724,#645,#726,.T.);+#724 = VERTEX_POINT('',#725);+#725 = CARTESIAN_POINT('',(1.95,-2.275,0.825));+#726 = SURFACE_CURVE('',#727,(#731,#738),.PCURVE_S1.);+#727 = LINE('',#728,#729);+#728 = CARTESIAN_POINT('',(1.95,-2.275,0.825));+#729 = VECTOR('',#730,1.);+#730 = DIRECTION('',(-0.707106781187,-0.707106781187,0.));+#731 = PCURVE('',#685,#732);+#732 = DEFINITIONAL_REPRESENTATION('',(#733),#737);+#733 = LINE('',#734,#735);+#734 = CARTESIAN_POINT('',(7.999472487695E-17,1.));+#735 = VECTOR('',#736,1.);+#736 = DIRECTION('',(1.,0.));+#737 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#738 = PCURVE('',#739,#744);+#739 = PLANE('',#740);+#740 = AXIS2_PLACEMENT_3D('',#741,#742,#743);+#741 = CARTESIAN_POINT('',(1.95,-2.275,1.025));+#742 = DIRECTION('',(-0.707106781187,0.707106781187,0.));+#743 = DIRECTION('',(-0.707106781187,-0.707106781187,0.));+#744 = DEFINITIONAL_REPRESENTATION('',(#745),#749);+#745 = LINE('',#746,#747);+#746 = CARTESIAN_POINT('',(-0.,-0.2));+#747 = VECTOR('',#748,1.);+#748 = DIRECTION('',(1.,0.));+#749 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#750 = ORIENTED_EDGE('',*,*,#751,.F.);+#751 = EDGE_CURVE('',#701,#724,#752,.T.);+#752 = SURFACE_CURVE('',#753,(#756,#763),.PCURVE_S1.);+#753 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#754,#755),.UNSPECIFIED.,.F.,.F.,+ (2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#754 = CARTESIAN_POINT('',(1.835171280765,-2.217585640382,0.1));+#755 = CARTESIAN_POINT('',(1.95,-2.275,0.825));+#756 = PCURVE('',#685,#757);+#757 = DEFINITIONAL_REPRESENTATION('',(#758),#762);+#758 = LINE('',#759,#760);+#759 = CARTESIAN_POINT('',(3.707552905462E-16,1.10118465575E-18));+#760 = VECTOR('',#761,1.);+#761 = DIRECTION('',(-4.463333469861E-16,1.));+#762 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#763 = PCURVE('',#764,#769);+#764 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,(+ (#765,#766)+ ,(#767,#768+ )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,4.55),(0.,1.),+ .PIECEWISE_BEZIER_KNOTS.);+#765 = CARTESIAN_POINT('',(1.835171280765,2.217585640382,0.1));+#766 = CARTESIAN_POINT('',(1.95,2.275,0.825));+#767 = CARTESIAN_POINT('',(1.835171280765,-2.217585640382,0.1));+#768 = CARTESIAN_POINT('',(1.95,-2.275,0.825));+#769 = DEFINITIONAL_REPRESENTATION('',(#770),#774);+#770 = LINE('',#771,#772);+#771 = CARTESIAN_POINT('',(4.55,-5.031297844791E-18));+#772 = VECTOR('',#773,1.);+#773 = DIRECTION('',(0.,1.));+#774 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#775 = ADVANCED_FACE('',(#776),#764,.F.);+#776 = FACE_BOUND('',#777,.F.);+#777 = EDGE_LOOP('',(#778,#800,#801,#829,#857,#885,#913,#941,#969,#997,+ #1025,#1053));+#778 = ORIENTED_EDGE('',*,*,#779,.T.);+#779 = EDGE_CURVE('',#780,#701,#782,.T.);+#780 = VERTEX_POINT('',#781);+#781 = CARTESIAN_POINT('',(1.835171280765,2.217585640382,0.1));+#782 = SURFACE_CURVE('',#783,(#787,#793),.PCURVE_S1.);+#783 = LINE('',#784,#785);+#784 = CARTESIAN_POINT('',(1.835171280765,2.217585640382,0.1));+#785 = VECTOR('',#786,1.);+#786 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#787 = PCURVE('',#764,#788);+#788 = DEFINITIONAL_REPRESENTATION('',(#789),#792);+#789 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#790,#791),.UNSPECIFIED.,.F.,.F.,+ (2,2),(0.,4.435171280764),.PIECEWISE_BEZIER_KNOTS.);+#790 = CARTESIAN_POINT('',(-5.279026112648E-16,-7.468886720343E-18));+#791 = CARTESIAN_POINT('',(4.55,1.070087642278E-16));+#792 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#793 = PCURVE('',#65,#794);+#794 = DEFINITIONAL_REPRESENTATION('',(#795),#799);+#795 = LINE('',#796,#797);+#796 = CARTESIAN_POINT('',(2.199777510349,2.792290641846));+#797 = VECTOR('',#798,1.);+#798 = DIRECTION('',(0.805560791625,-0.592513131498));+#799 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#800 = ORIENTED_EDGE('',*,*,#751,.T.);+#801 = ORIENTED_EDGE('',*,*,#802,.F.);+#802 = EDGE_CURVE('',#803,#724,#805,.T.);+#803 = VERTEX_POINT('',#804);+#804 = CARTESIAN_POINT('',(1.95,-2.11,0.825));+#805 = SURFACE_CURVE('',#806,(#810,#817),.PCURVE_S1.);+#806 = LINE('',#807,#808);+#807 = CARTESIAN_POINT('',(1.95,2.275,0.825));+#808 = VECTOR('',#809,1.);+#809 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#810 = PCURVE('',#764,#811);+#811 = DEFINITIONAL_REPRESENTATION('',(#812),#816);+#812 = LINE('',#813,#814);+#813 = CARTESIAN_POINT('',(8.881784197001E-16,1.));+#814 = VECTOR('',#815,1.);+#815 = DIRECTION('',(1.,1.345724878334E-15));+#816 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#817 = PCURVE('',#818,#823);+#818 = PLANE('',#819);+#819 = AXIS2_PLACEMENT_3D('',#820,#821,#822);+#820 = CARTESIAN_POINT('',(1.95,2.275,1.025));+#821 = DIRECTION('',(-1.,-1.110223024625E-16,0.));+#822 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#823 = DEFINITIONAL_REPRESENTATION('',(#824),#828);+#824 = LINE('',#825,#826);+#825 = CARTESIAN_POINT('',(0.,-0.2));+#826 = VECTOR('',#827,1.);+#827 = DIRECTION('',(1.,0.));+#828 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#829 = ORIENTED_EDGE('',*,*,#830,.F.);+#830 = EDGE_CURVE('',#831,#803,#833,.T.);+#831 = VERTEX_POINT('',#832);+#832 = CARTESIAN_POINT('',(1.95,-1.7,0.825));+#833 = SURFACE_CURVE('',#834,(#838,#845),.PCURVE_S1.);+#834 = LINE('',#835,#836);+#835 = CARTESIAN_POINT('',(1.95,2.275,0.825));+#836 = VECTOR('',#837,1.);+#837 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#838 = PCURVE('',#764,#839);+#839 = DEFINITIONAL_REPRESENTATION('',(#840),#844);+#840 = LINE('',#841,#842);+#841 = CARTESIAN_POINT('',(4.440892098501E-16,1.));+#842 = VECTOR('',#843,1.);+#843 = DIRECTION('',(1.,5.415722071342E-16));+#844 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#845 = PCURVE('',#846,#851);+#846 = PLANE('',#847);+#847 = AXIS2_PLACEMENT_3D('',#848,#849,#850);+#848 = CARTESIAN_POINT('',(1.8,-1.7,0.825));+#849 = DIRECTION('',(0.,0.,1.));+#850 = DIRECTION('',(1.,1.110223024625E-16,-0.));+#851 = DEFINITIONAL_REPRESENTATION('',(#852),#856);+#852 = LINE('',#853,#854);+#853 = CARTESIAN_POINT('',(0.15,3.975));+#854 = VECTOR('',#855,1.);+#855 = DIRECTION('',(0.,-1.));+#856 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#857 = ORIENTED_EDGE('',*,*,#858,.F.);+#858 = EDGE_CURVE('',#859,#831,#861,.T.);+#859 = VERTEX_POINT('',#860);+#860 = CARTESIAN_POINT('',(1.95,-0.84,0.825));+#861 = SURFACE_CURVE('',#862,(#866,#873),.PCURVE_S1.);+#862 = LINE('',#863,#864);+#863 = CARTESIAN_POINT('',(1.95,2.275,0.825));+#864 = VECTOR('',#865,1.);+#865 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#866 = PCURVE('',#764,#867);+#867 = DEFINITIONAL_REPRESENTATION('',(#868),#872);+#868 = LINE('',#869,#870);+#869 = CARTESIAN_POINT('',(4.440892098501E-16,1.));+#870 = VECTOR('',#871,1.);+#871 = DIRECTION('',(1.,2.581914010756E-16));+#872 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#873 = PCURVE('',#874,#879);+#874 = PLANE('',#875);+#875 = AXIS2_PLACEMENT_3D('',#876,#877,#878);+#876 = CARTESIAN_POINT('',(1.95,2.275,1.025));+#877 = DIRECTION('',(-1.,-1.110223024625E-16,0.));+#878 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#879 = DEFINITIONAL_REPRESENTATION('',(#880),#884);+#880 = LINE('',#881,#882);+#881 = CARTESIAN_POINT('',(0.,-0.2));+#882 = VECTOR('',#883,1.);+#883 = DIRECTION('',(1.,0.));+#884 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#885 = ORIENTED_EDGE('',*,*,#886,.F.);+#886 = EDGE_CURVE('',#887,#859,#889,.T.);+#887 = VERTEX_POINT('',#888);+#888 = CARTESIAN_POINT('',(1.95,-0.43,0.825));+#889 = SURFACE_CURVE('',#890,(#894,#901),.PCURVE_S1.);+#890 = LINE('',#891,#892);+#891 = CARTESIAN_POINT('',(1.95,2.275,0.825));+#892 = VECTOR('',#893,1.);+#893 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#894 = PCURVE('',#764,#895);+#895 = DEFINITIONAL_REPRESENTATION('',(#896),#900);+#896 = LINE('',#897,#898);+#897 = CARTESIAN_POINT('',(4.440892098501E-16,1.));+#898 = VECTOR('',#899,1.);+#899 = DIRECTION('',(1.,5.415722071342E-16));+#900 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#901 = PCURVE('',#902,#907);+#902 = PLANE('',#903);+#903 = AXIS2_PLACEMENT_3D('',#904,#905,#906);+#904 = CARTESIAN_POINT('',(1.8,-0.43,0.825));+#905 = DIRECTION('',(0.,0.,1.));+#906 = DIRECTION('',(1.,1.110223024625E-16,-0.));+#907 = DEFINITIONAL_REPRESENTATION('',(#908),#912);+#908 = LINE('',#909,#910);+#909 = CARTESIAN_POINT('',(0.15,2.705));+#910 = VECTOR('',#911,1.);+#911 = DIRECTION('',(0.,-1.));+#912 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#913 = ORIENTED_EDGE('',*,*,#914,.F.);+#914 = EDGE_CURVE('',#915,#887,#917,.T.);+#915 = VERTEX_POINT('',#916);+#916 = CARTESIAN_POINT('',(1.95,0.43,0.825));+#917 = SURFACE_CURVE('',#918,(#922,#929),.PCURVE_S1.);+#918 = LINE('',#919,#920);+#919 = CARTESIAN_POINT('',(1.95,2.275,0.825));+#920 = VECTOR('',#921,1.);+#921 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#922 = PCURVE('',#764,#923);+#923 = DEFINITIONAL_REPRESENTATION('',(#924),#928);+#924 = LINE('',#925,#926);+#925 = CARTESIAN_POINT('',(2.22044604925E-16,1.));+#926 = VECTOR('',#927,1.);+#927 = DIRECTION('',(1.,0.));+#928 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#929 = PCURVE('',#930,#935);+#930 = PLANE('',#931);+#931 = AXIS2_PLACEMENT_3D('',#932,#933,#934);+#932 = CARTESIAN_POINT('',(1.95,2.275,1.025));+#933 = DIRECTION('',(-1.,-1.110223024625E-16,0.));+#934 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#935 = DEFINITIONAL_REPRESENTATION('',(#936),#940);+#936 = LINE('',#937,#938);+#937 = CARTESIAN_POINT('',(0.,-0.2));+#938 = VECTOR('',#939,1.);+#939 = DIRECTION('',(1.,0.));+#940 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#941 = ORIENTED_EDGE('',*,*,#942,.F.);+#942 = EDGE_CURVE('',#943,#915,#945,.T.);+#943 = VERTEX_POINT('',#944);+#944 = CARTESIAN_POINT('',(1.95,0.84,0.825));+#945 = SURFACE_CURVE('',#946,(#950,#957),.PCURVE_S1.);+#946 = LINE('',#947,#948);+#947 = CARTESIAN_POINT('',(1.95,2.275,0.825));+#948 = VECTOR('',#949,1.);+#949 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#950 = PCURVE('',#764,#951);+#951 = DEFINITIONAL_REPRESENTATION('',(#952),#956);+#952 = LINE('',#953,#954);+#953 = CARTESIAN_POINT('',(2.22044604925E-16,1.));+#954 = VECTOR('',#955,1.);+#955 = DIRECTION('',(1.,0.));+#956 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#957 = PCURVE('',#958,#963);+#958 = PLANE('',#959);+#959 = AXIS2_PLACEMENT_3D('',#960,#961,#962);+#960 = CARTESIAN_POINT('',(1.8,0.84,0.825));+#961 = DIRECTION('',(0.,0.,1.));+#962 = DIRECTION('',(1.,1.110223024625E-16,-0.));+#963 = DEFINITIONAL_REPRESENTATION('',(#964),#968);+#964 = LINE('',#965,#966);+#965 = CARTESIAN_POINT('',(0.15,1.435));+#966 = VECTOR('',#967,1.);+#967 = DIRECTION('',(0.,-1.));+#968 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#969 = ORIENTED_EDGE('',*,*,#970,.F.);+#970 = EDGE_CURVE('',#971,#943,#973,.T.);+#971 = VERTEX_POINT('',#972);+#972 = CARTESIAN_POINT('',(1.95,1.7,0.825));+#973 = SURFACE_CURVE('',#974,(#978,#985),.PCURVE_S1.);+#974 = LINE('',#975,#976);+#975 = CARTESIAN_POINT('',(1.95,2.275,0.825));+#976 = VECTOR('',#977,1.);+#977 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#978 = PCURVE('',#764,#979);+#979 = DEFINITIONAL_REPRESENTATION('',(#980),#984);+#980 = LINE('',#981,#982);+#981 = CARTESIAN_POINT('',(2.22044604925E-16,1.));+#982 = VECTOR('',#983,1.);+#983 = DIRECTION('',(1.,1.290957005378E-16));+#984 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#985 = PCURVE('',#986,#991);+#986 = PLANE('',#987);+#987 = AXIS2_PLACEMENT_3D('',#988,#989,#990);+#988 = CARTESIAN_POINT('',(1.95,2.275,1.025));+#989 = DIRECTION('',(-1.,-1.110223024625E-16,0.));+#990 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#991 = DEFINITIONAL_REPRESENTATION('',(#992),#996);+#992 = LINE('',#993,#994);+#993 = CARTESIAN_POINT('',(0.,-0.2));+#994 = VECTOR('',#995,1.);+#995 = DIRECTION('',(1.,0.));+#996 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#997 = ORIENTED_EDGE('',*,*,#998,.F.);+#998 = EDGE_CURVE('',#999,#971,#1001,.T.);+#999 = VERTEX_POINT('',#1000);+#1000 = CARTESIAN_POINT('',(1.95,2.11,0.825));+#1001 = SURFACE_CURVE('',#1002,(#1006,#1013),.PCURVE_S1.);+#1002 = LINE('',#1003,#1004);+#1003 = CARTESIAN_POINT('',(1.95,2.275,0.825));+#1004 = VECTOR('',#1005,1.);+#1005 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#1006 = PCURVE('',#764,#1007);+#1007 = DEFINITIONAL_REPRESENTATION('',(#1008),#1012);+#1008 = LINE('',#1009,#1010);+#1009 = CARTESIAN_POINT('',(1.110223024625E-16,1.));+#1010 = VECTOR('',#1011,1.);+#1011 = DIRECTION('',(1.,0.));+#1012 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1013 = PCURVE('',#1014,#1019);+#1014 = PLANE('',#1015);+#1015 = AXIS2_PLACEMENT_3D('',#1016,#1017,#1018);+#1016 = CARTESIAN_POINT('',(1.8,2.11,0.825));+#1017 = DIRECTION('',(0.,0.,1.));+#1018 = DIRECTION('',(1.,1.110223024625E-16,-0.));+#1019 = DEFINITIONAL_REPRESENTATION('',(#1020),#1024);+#1020 = LINE('',#1021,#1022);+#1021 = CARTESIAN_POINT('',(0.15,0.165));+#1022 = VECTOR('',#1023,1.);+#1023 = DIRECTION('',(0.,-1.));+#1024 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1025 = ORIENTED_EDGE('',*,*,#1026,.F.);+#1026 = EDGE_CURVE('',#1027,#999,#1029,.T.);+#1027 = VERTEX_POINT('',#1028);+#1028 = CARTESIAN_POINT('',(1.95,2.275,0.825));+#1029 = SURFACE_CURVE('',#1030,(#1034,#1041),.PCURVE_S1.);+#1030 = LINE('',#1031,#1032);+#1031 = CARTESIAN_POINT('',(1.95,2.275,0.825));+#1032 = VECTOR('',#1033,1.);+#1033 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#1034 = PCURVE('',#764,#1035);+#1035 = DEFINITIONAL_REPRESENTATION('',(#1036),#1040);+#1036 = LINE('',#1037,#1038);+#1037 = CARTESIAN_POINT('',(1.978430405897E-17,1.));+#1038 = VECTOR('',#1039,1.);+#1039 = DIRECTION('',(1.,-6.728624391668E-16));+#1040 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1041 = PCURVE('',#1042,#1047);+#1042 = PLANE('',#1043);+#1043 = AXIS2_PLACEMENT_3D('',#1044,#1045,#1046);+#1044 = CARTESIAN_POINT('',(1.95,2.275,1.025));+#1045 = DIRECTION('',(-1.,-1.110223024625E-16,0.));+#1046 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#1047 = DEFINITIONAL_REPRESENTATION('',(#1048),#1052);+#1048 = LINE('',#1049,#1050);+#1049 = CARTESIAN_POINT('',(0.,-0.2));+#1050 = VECTOR('',#1051,1.);+#1051 = DIRECTION('',(1.,0.));+#1052 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1053 = ORIENTED_EDGE('',*,*,#1054,.F.);+#1054 = EDGE_CURVE('',#780,#1027,#1055,.T.);+#1055 = SURFACE_CURVE('',#1056,(#1059,#1066),.PCURVE_S1.);+#1056 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#1057,#1058),.UNSPECIFIED.,.F.,+ .F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#1057 = CARTESIAN_POINT('',(1.835171280765,2.217585640382,0.1));+#1058 = CARTESIAN_POINT('',(1.95,2.275,0.825));+#1059 = PCURVE('',#764,#1060);+#1060 = DEFINITIONAL_REPRESENTATION('',(#1061),#1065);+#1061 = LINE('',#1062,#1063);+#1062 = CARTESIAN_POINT('',(-5.279026112648E-16,-7.468886720343E-18));+#1063 = VECTOR('',#1064,1.);+#1064 = DIRECTION('',(5.504038244495E-16,1.));+#1065 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1066 = PCURVE('',#92,#1067);+#1067 = DEFINITIONAL_REPRESENTATION('',(#1068),#1072);+#1068 = LINE('',#1069,#1070);+#1069 = CARTESIAN_POINT('',(0.247487373415,7.001610398739E-17));+#1070 = VECTOR('',#1071,1.);+#1071 = DIRECTION('',(5.551115123126E-16,1.));+#1072 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1073 = ADVANCED_FACE('',(#1074),#1042,.F.);+#1074 = FACE_BOUND('',#1075,.F.);+#1075 = EDGE_LOOP('',(#1076,#1101,#1102,#1130));+#1076 = ORIENTED_EDGE('',*,*,#1077,.F.);+#1077 = EDGE_CURVE('',#1027,#1078,#1080,.T.);+#1078 = VERTEX_POINT('',#1079);+#1079 = CARTESIAN_POINT('',(1.95,2.275,1.025));+#1080 = SURFACE_CURVE('',#1081,(#1084,#1090),.PCURVE_S1.);+#1081 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#1082,#1083),.UNSPECIFIED.,.F.,+ .F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#1082 = CARTESIAN_POINT('',(1.95,2.275,0.825));+#1083 = CARTESIAN_POINT('',(1.95,2.275,1.025));+#1084 = PCURVE('',#1042,#1085);+#1085 = DEFINITIONAL_REPRESENTATION('',(#1086),#1089);+#1086 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#1087,#1088),.UNSPECIFIED.,.F.,+ .F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#1087 = CARTESIAN_POINT('',(0.,-0.2));+#1088 = CARTESIAN_POINT('',(0.,0.));+#1089 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1090 = PCURVE('',#1091,#1096);+#1091 = PLANE('',#1092);+#1092 = AXIS2_PLACEMENT_3D('',#1093,#1094,#1095);+#1093 = CARTESIAN_POINT('',(1.775,2.45,1.025));+#1094 = DIRECTION('',(-0.707106781187,-0.707106781187,0.));+#1095 = DIRECTION('',(0.707106781187,-0.707106781187,0.));+#1096 = DEFINITIONAL_REPRESENTATION('',(#1097),#1100);+#1097 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#1098,#1099),.UNSPECIFIED.,.F.,+ .F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#1098 = CARTESIAN_POINT('',(0.247487373415,-0.2));+#1099 = CARTESIAN_POINT('',(0.247487373415,0.));+#1100 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1101 = ORIENTED_EDGE('',*,*,#1026,.T.);+#1102 = ORIENTED_EDGE('',*,*,#1103,.T.);+#1103 = EDGE_CURVE('',#999,#1104,#1106,.T.);+#1104 = VERTEX_POINT('',#1105);+#1105 = CARTESIAN_POINT('',(1.95,2.11,1.025));+#1106 = SURFACE_CURVE('',#1107,(#1111,#1118),.PCURVE_S1.);+#1107 = LINE('',#1108,#1109);+#1108 = CARTESIAN_POINT('',(1.95,2.11,0.786976568901));+#1109 = VECTOR('',#1110,1.);+#1110 = DIRECTION('',(0.,0.,1.));+#1111 = PCURVE('',#1042,#1112);+#1112 = DEFINITIONAL_REPRESENTATION('',(#1113),#1117);+#1113 = LINE('',#1114,#1115);+#1114 = CARTESIAN_POINT('',(0.165,-0.238023431099));+#1115 = VECTOR('',#1116,1.);+#1116 = DIRECTION('',(0.,1.));+#1117 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1118 = PCURVE('',#1119,#1124);+#1119 = PLANE('',#1120);+#1120 = AXIS2_PLACEMENT_3D('',#1121,#1122,#1123);+#1121 = CARTESIAN_POINT('',(2.42560961319,2.11,0.548953137803));+#1122 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#1123 = DIRECTION('',(0.,0.,1.));+#1124 = DEFINITIONAL_REPRESENTATION('',(#1125),#1129);+#1125 = LINE('',#1126,#1127);+#1126 = CARTESIAN_POINT('',(0.238023431098,0.47560961319));+#1127 = VECTOR('',#1128,1.);+#1128 = DIRECTION('',(1.,0.));+#1129 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1130 = ORIENTED_EDGE('',*,*,#1131,.F.);+#1131 = EDGE_CURVE('',#1078,#1104,#1132,.T.);+#1132 = SURFACE_CURVE('',#1133,(#1137,#1144),.PCURVE_S1.);+#1133 = LINE('',#1134,#1135);+#1134 = CARTESIAN_POINT('',(1.95,2.275,1.025));+#1135 = VECTOR('',#1136,1.);+#1136 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#1137 = PCURVE('',#1042,#1138);+#1138 = DEFINITIONAL_REPRESENTATION('',(#1139),#1143);+#1139 = LINE('',#1140,#1141);+#1140 = CARTESIAN_POINT('',(0.,0.));+#1141 = VECTOR('',#1142,1.);+#1142 = DIRECTION('',(1.,0.));+#1143 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1144 = PCURVE('',#1145,#1150);+#1145 = PLANE('',#1146);+#1146 = AXIS2_PLACEMENT_3D('',#1147,#1148,#1149);+#1147 = CARTESIAN_POINT('',(-3.027078129022E-16,2.4125,1.025));+#1148 = DIRECTION('',(2.007919022429E-31,-7.713306628828E-27,-1.));+#1149 = DIRECTION('',(1.,1.112083013911E-16,2.00791902242E-31));+#1150 = DEFINITIONAL_REPRESENTATION('',(#1151),#1155);+#1151 = LINE('',#1152,#1153);+#1152 = CARTESIAN_POINT('',(1.95,0.1375));+#1153 = VECTOR('',#1154,1.);+#1154 = DIRECTION('',(-1.859989286E-19,1.));+#1155 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1156 = ADVANCED_FACE('',(#1157,#2170),#1145,.F.);+#1157 = FACE_BOUND('',#1158,.F.);+#1158 = EDGE_LOOP('',(#1159,#1184,#1207,#1228,#1229,#1252,#1280,#1308,+ #1331,#1359,#1387,#1415,#1438,#1466,#1494,#1522,#1545,#1573,#1601,+ #1629,#1652,#1675,#1698,#1721,#1744,#1772,#1800,#1828,#1851,#1879,+ #1907,#1935,#1958,#1986,#2014,#2042,#2065,#2093,#2121,#2149));+#1159 = ORIENTED_EDGE('',*,*,#1160,.T.);+#1160 = EDGE_CURVE('',#1161,#1163,#1165,.T.);+#1161 = VERTEX_POINT('',#1162);+#1162 = CARTESIAN_POINT('',(-1.95,2.275,1.025));+#1163 = VERTEX_POINT('',#1164);+#1164 = CARTESIAN_POINT('',(-1.775,2.45,1.025));+#1165 = SURFACE_CURVE('',#1166,(#1170,#1177),.PCURVE_S1.);+#1166 = LINE('',#1167,#1168);+#1167 = CARTESIAN_POINT('',(-1.95,2.275,1.025));+#1168 = VECTOR('',#1169,1.);+#1169 = DIRECTION('',(0.707106781187,0.707106781187,0.));+#1170 = PCURVE('',#1145,#1171);+#1171 = DEFINITIONAL_REPRESENTATION('',(#1172),#1176);+#1172 = LINE('',#1173,#1174);+#1173 = CARTESIAN_POINT('',(-1.95,0.1375));+#1174 = VECTOR('',#1175,1.);+#1175 = DIRECTION('',(0.707106781187,-0.707106781187));+#1176 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1177 = PCURVE('',#199,#1178);+#1178 = DEFINITIONAL_REPRESENTATION('',(#1179),#1183);+#1179 = LINE('',#1180,#1181);+#1180 = CARTESIAN_POINT('',(0.,0.));+#1181 = VECTOR('',#1182,1.);+#1182 = DIRECTION('',(1.,0.));+#1183 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1184 = ORIENTED_EDGE('',*,*,#1185,.T.);+#1185 = EDGE_CURVE('',#1163,#1186,#1188,.T.);+#1186 = VERTEX_POINT('',#1187);+#1187 = CARTESIAN_POINT('',(1.775,2.45,1.025));+#1188 = SURFACE_CURVE('',#1189,(#1193,#1200),.PCURVE_S1.);+#1189 = LINE('',#1190,#1191);+#1190 = CARTESIAN_POINT('',(-1.775,2.45,1.025));+#1191 = VECTOR('',#1192,1.);+#1192 = DIRECTION('',(1.,1.110223024625E-16,0.));+#1193 = PCURVE('',#1145,#1194);+#1194 = DEFINITIONAL_REPRESENTATION('',(#1195),#1199);+#1195 = LINE('',#1196,#1197);+#1196 = CARTESIAN_POINT('',(-1.775,-3.75E-02));+#1197 = VECTOR('',#1198,1.);+#1198 = DIRECTION('',(1.,1.859989286E-19));+#1199 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1200 = PCURVE('',#120,#1201);+#1201 = DEFINITIONAL_REPRESENTATION('',(#1202),#1206);+#1202 = LINE('',#1203,#1204);+#1203 = CARTESIAN_POINT('',(0.,0.));+#1204 = VECTOR('',#1205,1.);+#1205 = DIRECTION('',(1.,0.));+#1206 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1207 = ORIENTED_EDGE('',*,*,#1208,.T.);+#1208 = EDGE_CURVE('',#1186,#1078,#1209,.T.);+#1209 = SURFACE_CURVE('',#1210,(#1214,#1221),.PCURVE_S1.);+#1210 = LINE('',#1211,#1212);+#1211 = CARTESIAN_POINT('',(1.775,2.45,1.025));+#1212 = VECTOR('',#1213,1.);+#1213 = DIRECTION('',(0.707106781187,-0.707106781187,0.));+#1214 = PCURVE('',#1145,#1215);+#1215 = DEFINITIONAL_REPRESENTATION('',(#1216),#1220);+#1216 = LINE('',#1217,#1218);+#1217 = CARTESIAN_POINT('',(1.775,-3.75E-02));+#1218 = VECTOR('',#1219,1.);+#1219 = DIRECTION('',(0.707106781187,0.707106781187));+#1220 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1221 = PCURVE('',#1091,#1222);+#1222 = DEFINITIONAL_REPRESENTATION('',(#1223),#1227);+#1223 = LINE('',#1224,#1225);+#1224 = CARTESIAN_POINT('',(0.,0.));+#1225 = VECTOR('',#1226,1.);+#1226 = DIRECTION('',(1.,0.));+#1227 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1228 = ORIENTED_EDGE('',*,*,#1131,.T.);+#1229 = ORIENTED_EDGE('',*,*,#1230,.F.);+#1230 = EDGE_CURVE('',#1231,#1104,#1233,.T.);+#1231 = VERTEX_POINT('',#1232);+#1232 = CARTESIAN_POINT('',(2.25,2.11,1.025));+#1233 = SURFACE_CURVE('',#1234,(#1238,#1245),.PCURVE_S1.);+#1234 = LINE('',#1235,#1236);+#1235 = CARTESIAN_POINT('',(2.25,2.11,1.025));+#1236 = VECTOR('',#1237,1.);+#1237 = DIRECTION('',(-1.,-1.110223024625E-16,0.));+#1238 = PCURVE('',#1145,#1239);+#1239 = DEFINITIONAL_REPRESENTATION('',(#1240),#1244);+#1240 = LINE('',#1241,#1242);+#1241 = CARTESIAN_POINT('',(2.25,0.3025));+#1242 = VECTOR('',#1243,1.);+#1243 = DIRECTION('',(-1.,-1.859989286E-19));+#1244 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1245 = PCURVE('',#1119,#1246);+#1246 = DEFINITIONAL_REPRESENTATION('',(#1247),#1251);+#1247 = LINE('',#1248,#1249);+#1248 = CARTESIAN_POINT('',(0.476046862197,0.17560961319));+#1249 = VECTOR('',#1250,1.);+#1250 = DIRECTION('',(0.,1.));+#1251 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1252 = ORIENTED_EDGE('',*,*,#1253,.T.);+#1253 = EDGE_CURVE('',#1231,#1254,#1256,.T.);+#1254 = VERTEX_POINT('',#1255);+#1255 = CARTESIAN_POINT('',(2.25,1.7,1.025));+#1256 = SURFACE_CURVE('',#1257,(#1261,#1268),.PCURVE_S1.);+#1257 = LINE('',#1258,#1259);+#1258 = CARTESIAN_POINT('',(2.25,2.11,1.025));+#1259 = VECTOR('',#1260,1.);+#1260 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#1261 = PCURVE('',#1145,#1262);+#1262 = DEFINITIONAL_REPRESENTATION('',(#1263),#1267);+#1263 = LINE('',#1264,#1265);+#1264 = CARTESIAN_POINT('',(2.25,0.3025));+#1265 = VECTOR('',#1266,1.);+#1266 = DIRECTION('',(-1.859989286E-19,1.));+#1267 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1268 = PCURVE('',#1269,#1274);+#1269 = CYLINDRICAL_SURFACE('',#1270,0.3);+#1270 = AXIS2_PLACEMENT_3D('',#1271,#1272,#1273);+#1271 = CARTESIAN_POINT('',(2.25,2.11,0.725));+#1272 = DIRECTION('',(-1.110223024625E-16,1.,0.));+#1273 = DIRECTION('',(0.984807753012,1.093356242223E-16,0.173648177667)+ );+#1274 = DEFINITIONAL_REPRESENTATION('',(#1275),#1279);+#1275 = LINE('',#1276,#1277);+#1276 = CARTESIAN_POINT('',(4.886921905584,0.));+#1277 = VECTOR('',#1278,1.);+#1278 = DIRECTION('',(-4.332577657074E-15,-1.));+#1279 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1280 = ORIENTED_EDGE('',*,*,#1281,.T.);+#1281 = EDGE_CURVE('',#1254,#1282,#1284,.T.);+#1282 = VERTEX_POINT('',#1283);+#1283 = CARTESIAN_POINT('',(1.95,1.7,1.025));+#1284 = SURFACE_CURVE('',#1285,(#1289,#1296),.PCURVE_S1.);+#1285 = LINE('',#1286,#1287);+#1286 = CARTESIAN_POINT('',(2.25,1.7,1.025));+#1287 = VECTOR('',#1288,1.);+#1288 = DIRECTION('',(-1.,-1.110223024625E-16,0.));+#1289 = PCURVE('',#1145,#1290);+#1290 = DEFINITIONAL_REPRESENTATION('',(#1291),#1295);+#1291 = LINE('',#1292,#1293);+#1292 = CARTESIAN_POINT('',(2.25,0.7125));+#1293 = VECTOR('',#1294,1.);+#1294 = DIRECTION('',(-1.,-1.859989286E-19));+#1295 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1296 = PCURVE('',#1297,#1302);+#1297 = PLANE('',#1298);+#1298 = AXIS2_PLACEMENT_3D('',#1299,#1300,#1301);+#1299 = CARTESIAN_POINT('',(2.42560961319,1.7,0.548953137803));+#1300 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#1301 = DIRECTION('',(0.,0.,1.));+#1302 = DEFINITIONAL_REPRESENTATION('',(#1303),#1307);+#1303 = LINE('',#1304,#1305);+#1304 = CARTESIAN_POINT('',(0.476046862197,0.17560961319));+#1305 = VECTOR('',#1306,1.);+#1306 = DIRECTION('',(0.,1.));+#1307 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1308 = ORIENTED_EDGE('',*,*,#1309,.T.);+#1309 = EDGE_CURVE('',#1282,#1310,#1312,.T.);+#1310 = VERTEX_POINT('',#1311);+#1311 = CARTESIAN_POINT('',(1.95,0.84,1.025));+#1312 = SURFACE_CURVE('',#1313,(#1317,#1324),.PCURVE_S1.);+#1313 = LINE('',#1314,#1315);+#1314 = CARTESIAN_POINT('',(1.95,2.275,1.025));+#1315 = VECTOR('',#1316,1.);+#1316 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#1317 = PCURVE('',#1145,#1318);+#1318 = DEFINITIONAL_REPRESENTATION('',(#1319),#1323);+#1319 = LINE('',#1320,#1321);+#1320 = CARTESIAN_POINT('',(1.95,0.1375));+#1321 = VECTOR('',#1322,1.);+#1322 = DIRECTION('',(-1.859989286E-19,1.));+#1323 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1324 = PCURVE('',#986,#1325);+#1325 = DEFINITIONAL_REPRESENTATION('',(#1326),#1330);+#1326 = LINE('',#1327,#1328);+#1327 = CARTESIAN_POINT('',(0.,0.));+#1328 = VECTOR('',#1329,1.);+#1329 = DIRECTION('',(1.,0.));+#1330 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1331 = ORIENTED_EDGE('',*,*,#1332,.F.);+#1332 = EDGE_CURVE('',#1333,#1310,#1335,.T.);+#1333 = VERTEX_POINT('',#1334);+#1334 = CARTESIAN_POINT('',(2.25,0.84,1.025));+#1335 = SURFACE_CURVE('',#1336,(#1340,#1347),.PCURVE_S1.);+#1336 = LINE('',#1337,#1338);+#1337 = CARTESIAN_POINT('',(2.25,0.84,1.025));+#1338 = VECTOR('',#1339,1.);+#1339 = DIRECTION('',(-1.,-1.110223024625E-16,0.));+#1340 = PCURVE('',#1145,#1341);+#1341 = DEFINITIONAL_REPRESENTATION('',(#1342),#1346);+#1342 = LINE('',#1343,#1344);+#1343 = CARTESIAN_POINT('',(2.25,1.5725));+#1344 = VECTOR('',#1345,1.);+#1345 = DIRECTION('',(-1.,-1.859989286E-19));+#1346 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1347 = PCURVE('',#1348,#1353);+#1348 = PLANE('',#1349);+#1349 = AXIS2_PLACEMENT_3D('',#1350,#1351,#1352);+#1350 = CARTESIAN_POINT('',(2.42560961319,0.84,0.548953137803));+#1351 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#1352 = DIRECTION('',(0.,0.,1.));+#1353 = DEFINITIONAL_REPRESENTATION('',(#1354),#1358);+#1354 = LINE('',#1355,#1356);+#1355 = CARTESIAN_POINT('',(0.476046862197,0.17560961319));+#1356 = VECTOR('',#1357,1.);+#1357 = DIRECTION('',(0.,1.));+#1358 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1359 = ORIENTED_EDGE('',*,*,#1360,.T.);+#1360 = EDGE_CURVE('',#1333,#1361,#1363,.T.);+#1361 = VERTEX_POINT('',#1362);+#1362 = CARTESIAN_POINT('',(2.25,0.43,1.025));+#1363 = SURFACE_CURVE('',#1364,(#1368,#1375),.PCURVE_S1.);+#1364 = LINE('',#1365,#1366);+#1365 = CARTESIAN_POINT('',(2.25,0.84,1.025));+#1366 = VECTOR('',#1367,1.);+#1367 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#1368 = PCURVE('',#1145,#1369);+#1369 = DEFINITIONAL_REPRESENTATION('',(#1370),#1374);+#1370 = LINE('',#1371,#1372);+#1371 = CARTESIAN_POINT('',(2.25,1.5725));+#1372 = VECTOR('',#1373,1.);+#1373 = DIRECTION('',(-1.859989286E-19,1.));+#1374 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1375 = PCURVE('',#1376,#1381);+#1376 = CYLINDRICAL_SURFACE('',#1377,0.3);+#1377 = AXIS2_PLACEMENT_3D('',#1378,#1379,#1380);+#1378 = CARTESIAN_POINT('',(2.25,0.84,0.725));+#1379 = DIRECTION('',(-1.110223024625E-16,1.,0.));+#1380 = DIRECTION('',(0.984807753012,1.093356242223E-16,0.173648177667)+ );+#1381 = DEFINITIONAL_REPRESENTATION('',(#1382),#1386);+#1382 = LINE('',#1383,#1384);+#1383 = CARTESIAN_POINT('',(4.886921905584,0.));+#1384 = VECTOR('',#1385,1.);+#1385 = DIRECTION('',(0.,-1.));+#1386 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1387 = ORIENTED_EDGE('',*,*,#1388,.T.);+#1388 = EDGE_CURVE('',#1361,#1389,#1391,.T.);+#1389 = VERTEX_POINT('',#1390);+#1390 = CARTESIAN_POINT('',(1.95,0.43,1.025));+#1391 = SURFACE_CURVE('',#1392,(#1396,#1403),.PCURVE_S1.);+#1392 = LINE('',#1393,#1394);+#1393 = CARTESIAN_POINT('',(2.25,0.43,1.025));+#1394 = VECTOR('',#1395,1.);+#1395 = DIRECTION('',(-1.,-1.110223024625E-16,0.));+#1396 = PCURVE('',#1145,#1397);+#1397 = DEFINITIONAL_REPRESENTATION('',(#1398),#1402);+#1398 = LINE('',#1399,#1400);+#1399 = CARTESIAN_POINT('',(2.25,1.9825));+#1400 = VECTOR('',#1401,1.);+#1401 = DIRECTION('',(-1.,-1.859989286E-19));+#1402 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1403 = PCURVE('',#1404,#1409);+#1404 = PLANE('',#1405);+#1405 = AXIS2_PLACEMENT_3D('',#1406,#1407,#1408);+#1406 = CARTESIAN_POINT('',(2.42560961319,0.43,0.548953137803));+#1407 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#1408 = DIRECTION('',(0.,0.,1.));+#1409 = DEFINITIONAL_REPRESENTATION('',(#1410),#1414);+#1410 = LINE('',#1411,#1412);+#1411 = CARTESIAN_POINT('',(0.476046862197,0.17560961319));+#1412 = VECTOR('',#1413,1.);+#1413 = DIRECTION('',(0.,1.));+#1414 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1415 = ORIENTED_EDGE('',*,*,#1416,.T.);+#1416 = EDGE_CURVE('',#1389,#1417,#1419,.T.);+#1417 = VERTEX_POINT('',#1418);+#1418 = CARTESIAN_POINT('',(1.95,-0.43,1.025));+#1419 = SURFACE_CURVE('',#1420,(#1424,#1431),.PCURVE_S1.);+#1420 = LINE('',#1421,#1422);+#1421 = CARTESIAN_POINT('',(1.95,2.275,1.025));+#1422 = VECTOR('',#1423,1.);+#1423 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#1424 = PCURVE('',#1145,#1425);+#1425 = DEFINITIONAL_REPRESENTATION('',(#1426),#1430);+#1426 = LINE('',#1427,#1428);+#1427 = CARTESIAN_POINT('',(1.95,0.1375));+#1428 = VECTOR('',#1429,1.);+#1429 = DIRECTION('',(-1.859989286E-19,1.));+#1430 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1431 = PCURVE('',#930,#1432);+#1432 = DEFINITIONAL_REPRESENTATION('',(#1433),#1437);+#1433 = LINE('',#1434,#1435);+#1434 = CARTESIAN_POINT('',(0.,0.));+#1435 = VECTOR('',#1436,1.);+#1436 = DIRECTION('',(1.,0.));+#1437 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1438 = ORIENTED_EDGE('',*,*,#1439,.F.);+#1439 = EDGE_CURVE('',#1440,#1417,#1442,.T.);+#1440 = VERTEX_POINT('',#1441);+#1441 = CARTESIAN_POINT('',(2.25,-0.43,1.025));+#1442 = SURFACE_CURVE('',#1443,(#1447,#1454),.PCURVE_S1.);+#1443 = LINE('',#1444,#1445);+#1444 = CARTESIAN_POINT('',(2.25,-0.43,1.025));+#1445 = VECTOR('',#1446,1.);+#1446 = DIRECTION('',(-1.,-1.110223024625E-16,0.));+#1447 = PCURVE('',#1145,#1448);+#1448 = DEFINITIONAL_REPRESENTATION('',(#1449),#1453);+#1449 = LINE('',#1450,#1451);+#1450 = CARTESIAN_POINT('',(2.25,2.8425));+#1451 = VECTOR('',#1452,1.);+#1452 = DIRECTION('',(-1.,-1.859989286E-19));+#1453 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1454 = PCURVE('',#1455,#1460);+#1455 = PLANE('',#1456);+#1456 = AXIS2_PLACEMENT_3D('',#1457,#1458,#1459);+#1457 = CARTESIAN_POINT('',(2.42560961319,-0.43,0.548953137803));+#1458 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#1459 = DIRECTION('',(0.,0.,1.));+#1460 = DEFINITIONAL_REPRESENTATION('',(#1461),#1465);+#1461 = LINE('',#1462,#1463);+#1462 = CARTESIAN_POINT('',(0.476046862197,0.17560961319));+#1463 = VECTOR('',#1464,1.);+#1464 = DIRECTION('',(0.,1.));+#1465 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1466 = ORIENTED_EDGE('',*,*,#1467,.T.);+#1467 = EDGE_CURVE('',#1440,#1468,#1470,.T.);+#1468 = VERTEX_POINT('',#1469);+#1469 = CARTESIAN_POINT('',(2.25,-0.84,1.025));+#1470 = SURFACE_CURVE('',#1471,(#1475,#1482),.PCURVE_S1.);+#1471 = LINE('',#1472,#1473);+#1472 = CARTESIAN_POINT('',(2.25,-0.43,1.025));+#1473 = VECTOR('',#1474,1.);+#1474 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#1475 = PCURVE('',#1145,#1476);+#1476 = DEFINITIONAL_REPRESENTATION('',(#1477),#1481);+#1477 = LINE('',#1478,#1479);+#1478 = CARTESIAN_POINT('',(2.25,2.8425));+#1479 = VECTOR('',#1480,1.);+#1480 = DIRECTION('',(-1.859989286E-19,1.));+#1481 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1482 = PCURVE('',#1483,#1488);+#1483 = CYLINDRICAL_SURFACE('',#1484,0.3);+#1484 = AXIS2_PLACEMENT_3D('',#1485,#1486,#1487);+#1485 = CARTESIAN_POINT('',(2.25,-0.43,0.725));+#1486 = DIRECTION('',(-1.110223024625E-16,1.,0.));+#1487 = DIRECTION('',(0.984807753012,1.093356242223E-16,0.173648177667)+ );+#1488 = DEFINITIONAL_REPRESENTATION('',(#1489),#1493);+#1489 = LINE('',#1490,#1491);+#1490 = CARTESIAN_POINT('',(4.886921905584,0.));+#1491 = VECTOR('',#1492,1.);+#1492 = DIRECTION('',(0.,-1.));+#1493 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1494 = ORIENTED_EDGE('',*,*,#1495,.T.);+#1495 = EDGE_CURVE('',#1468,#1496,#1498,.T.);+#1496 = VERTEX_POINT('',#1497);+#1497 = CARTESIAN_POINT('',(1.95,-0.84,1.025));+#1498 = SURFACE_CURVE('',#1499,(#1503,#1510),.PCURVE_S1.);+#1499 = LINE('',#1500,#1501);+#1500 = CARTESIAN_POINT('',(2.25,-0.84,1.025));+#1501 = VECTOR('',#1502,1.);+#1502 = DIRECTION('',(-1.,-1.110223024625E-16,0.));+#1503 = PCURVE('',#1145,#1504);+#1504 = DEFINITIONAL_REPRESENTATION('',(#1505),#1509);+#1505 = LINE('',#1506,#1507);+#1506 = CARTESIAN_POINT('',(2.25,3.2525));+#1507 = VECTOR('',#1508,1.);+#1508 = DIRECTION('',(-1.,-1.859989286E-19));+#1509 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1510 = PCURVE('',#1511,#1516);+#1511 = PLANE('',#1512);+#1512 = AXIS2_PLACEMENT_3D('',#1513,#1514,#1515);+#1513 = CARTESIAN_POINT('',(2.42560961319,-0.84,0.548953137803));+#1514 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#1515 = DIRECTION('',(0.,0.,1.));+#1516 = DEFINITIONAL_REPRESENTATION('',(#1517),#1521);+#1517 = LINE('',#1518,#1519);+#1518 = CARTESIAN_POINT('',(0.476046862197,0.17560961319));+#1519 = VECTOR('',#1520,1.);+#1520 = DIRECTION('',(0.,1.));+#1521 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1522 = ORIENTED_EDGE('',*,*,#1523,.T.);+#1523 = EDGE_CURVE('',#1496,#1524,#1526,.T.);+#1524 = VERTEX_POINT('',#1525);+#1525 = CARTESIAN_POINT('',(1.95,-1.7,1.025));+#1526 = SURFACE_CURVE('',#1527,(#1531,#1538),.PCURVE_S1.);+#1527 = LINE('',#1528,#1529);+#1528 = CARTESIAN_POINT('',(1.95,2.275,1.025));+#1529 = VECTOR('',#1530,1.);+#1530 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#1531 = PCURVE('',#1145,#1532);+#1532 = DEFINITIONAL_REPRESENTATION('',(#1533),#1537);+#1533 = LINE('',#1534,#1535);+#1534 = CARTESIAN_POINT('',(1.95,0.1375));+#1535 = VECTOR('',#1536,1.);+#1536 = DIRECTION('',(-1.859989286E-19,1.));+#1537 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1538 = PCURVE('',#874,#1539);+#1539 = DEFINITIONAL_REPRESENTATION('',(#1540),#1544);+#1540 = LINE('',#1541,#1542);+#1541 = CARTESIAN_POINT('',(0.,0.));+#1542 = VECTOR('',#1543,1.);+#1543 = DIRECTION('',(1.,0.));+#1544 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1545 = ORIENTED_EDGE('',*,*,#1546,.F.);+#1546 = EDGE_CURVE('',#1547,#1524,#1549,.T.);+#1547 = VERTEX_POINT('',#1548);+#1548 = CARTESIAN_POINT('',(2.25,-1.7,1.025));+#1549 = SURFACE_CURVE('',#1550,(#1554,#1561),.PCURVE_S1.);+#1550 = LINE('',#1551,#1552);+#1551 = CARTESIAN_POINT('',(2.25,-1.7,1.025));+#1552 = VECTOR('',#1553,1.);+#1553 = DIRECTION('',(-1.,-1.110223024625E-16,0.));+#1554 = PCURVE('',#1145,#1555);+#1555 = DEFINITIONAL_REPRESENTATION('',(#1556),#1560);+#1556 = LINE('',#1557,#1558);+#1557 = CARTESIAN_POINT('',(2.25,4.1125));+#1558 = VECTOR('',#1559,1.);+#1559 = DIRECTION('',(-1.,-1.859989286E-19));+#1560 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1561 = PCURVE('',#1562,#1567);+#1562 = PLANE('',#1563);+#1563 = AXIS2_PLACEMENT_3D('',#1564,#1565,#1566);+#1564 = CARTESIAN_POINT('',(2.42560961319,-1.7,0.548953137803));+#1565 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#1566 = DIRECTION('',(0.,0.,1.));+#1567 = DEFINITIONAL_REPRESENTATION('',(#1568),#1572);+#1568 = LINE('',#1569,#1570);+#1569 = CARTESIAN_POINT('',(0.476046862197,0.17560961319));+#1570 = VECTOR('',#1571,1.);+#1571 = DIRECTION('',(0.,1.));+#1572 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1573 = ORIENTED_EDGE('',*,*,#1574,.T.);+#1574 = EDGE_CURVE('',#1547,#1575,#1577,.T.);+#1575 = VERTEX_POINT('',#1576);+#1576 = CARTESIAN_POINT('',(2.25,-2.11,1.025));+#1577 = SURFACE_CURVE('',#1578,(#1582,#1589),.PCURVE_S1.);+#1578 = LINE('',#1579,#1580);+#1579 = CARTESIAN_POINT('',(2.25,-1.7,1.025));+#1580 = VECTOR('',#1581,1.);+#1581 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#1582 = PCURVE('',#1145,#1583);+#1583 = DEFINITIONAL_REPRESENTATION('',(#1584),#1588);+#1584 = LINE('',#1585,#1586);+#1585 = CARTESIAN_POINT('',(2.25,4.1125));+#1586 = VECTOR('',#1587,1.);+#1587 = DIRECTION('',(-1.859989286E-19,1.));+#1588 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1589 = PCURVE('',#1590,#1595);+#1590 = CYLINDRICAL_SURFACE('',#1591,0.3);+#1591 = AXIS2_PLACEMENT_3D('',#1592,#1593,#1594);+#1592 = CARTESIAN_POINT('',(2.25,-1.7,0.725));+#1593 = DIRECTION('',(-1.110223024625E-16,1.,0.));+#1594 = DIRECTION('',(0.984807753012,1.093356242223E-16,0.173648177667)+ );+#1595 = DEFINITIONAL_REPRESENTATION('',(#1596),#1600);+#1596 = LINE('',#1597,#1598);+#1597 = CARTESIAN_POINT('',(4.886921905584,0.));+#1598 = VECTOR('',#1599,1.);+#1599 = DIRECTION('',(-4.332577657074E-15,-1.));+#1600 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1601 = ORIENTED_EDGE('',*,*,#1602,.T.);+#1602 = EDGE_CURVE('',#1575,#1603,#1605,.T.);+#1603 = VERTEX_POINT('',#1604);+#1604 = CARTESIAN_POINT('',(1.95,-2.11,1.025));+#1605 = SURFACE_CURVE('',#1606,(#1610,#1617),.PCURVE_S1.);+#1606 = LINE('',#1607,#1608);+#1607 = CARTESIAN_POINT('',(2.25,-2.11,1.025));+#1608 = VECTOR('',#1609,1.);+#1609 = DIRECTION('',(-1.,-1.110223024625E-16,0.));+#1610 = PCURVE('',#1145,#1611);+#1611 = DEFINITIONAL_REPRESENTATION('',(#1612),#1616);+#1612 = LINE('',#1613,#1614);+#1613 = CARTESIAN_POINT('',(2.25,4.5225));+#1614 = VECTOR('',#1615,1.);+#1615 = DIRECTION('',(-1.,-1.859989286E-19));+#1616 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1617 = PCURVE('',#1618,#1623);+#1618 = PLANE('',#1619);+#1619 = AXIS2_PLACEMENT_3D('',#1620,#1621,#1622);+#1620 = CARTESIAN_POINT('',(2.42560961319,-2.11,0.548953137803));+#1621 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#1622 = DIRECTION('',(0.,0.,1.));+#1623 = DEFINITIONAL_REPRESENTATION('',(#1624),#1628);+#1624 = LINE('',#1625,#1626);+#1625 = CARTESIAN_POINT('',(0.476046862197,0.17560961319));+#1626 = VECTOR('',#1627,1.);+#1627 = DIRECTION('',(0.,1.));+#1628 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1629 = ORIENTED_EDGE('',*,*,#1630,.T.);+#1630 = EDGE_CURVE('',#1603,#1631,#1633,.T.);+#1631 = VERTEX_POINT('',#1632);+#1632 = CARTESIAN_POINT('',(1.95,-2.275,1.025));+#1633 = SURFACE_CURVE('',#1634,(#1638,#1645),.PCURVE_S1.);+#1634 = LINE('',#1635,#1636);+#1635 = CARTESIAN_POINT('',(1.95,2.275,1.025));+#1636 = VECTOR('',#1637,1.);+#1637 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#1638 = PCURVE('',#1145,#1639);+#1639 = DEFINITIONAL_REPRESENTATION('',(#1640),#1644);+#1640 = LINE('',#1641,#1642);+#1641 = CARTESIAN_POINT('',(1.95,0.1375));+#1642 = VECTOR('',#1643,1.);+#1643 = DIRECTION('',(-1.859989286E-19,1.));+#1644 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1645 = PCURVE('',#818,#1646);+#1646 = DEFINITIONAL_REPRESENTATION('',(#1647),#1651);+#1647 = LINE('',#1648,#1649);+#1648 = CARTESIAN_POINT('',(0.,0.));+#1649 = VECTOR('',#1650,1.);+#1650 = DIRECTION('',(1.,0.));+#1651 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1652 = ORIENTED_EDGE('',*,*,#1653,.T.);+#1653 = EDGE_CURVE('',#1631,#1654,#1656,.T.);+#1654 = VERTEX_POINT('',#1655);+#1655 = CARTESIAN_POINT('',(1.775,-2.45,1.025));+#1656 = SURFACE_CURVE('',#1657,(#1661,#1668),.PCURVE_S1.);+#1657 = LINE('',#1658,#1659);+#1658 = CARTESIAN_POINT('',(1.95,-2.275,1.025));+#1659 = VECTOR('',#1660,1.);+#1660 = DIRECTION('',(-0.707106781187,-0.707106781187,0.));+#1661 = PCURVE('',#1145,#1662);+#1662 = DEFINITIONAL_REPRESENTATION('',(#1663),#1667);+#1663 = LINE('',#1664,#1665);+#1664 = CARTESIAN_POINT('',(1.95,4.6875));+#1665 = VECTOR('',#1666,1.);+#1666 = DIRECTION('',(-0.707106781187,0.707106781187));+#1667 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1668 = PCURVE('',#739,#1669);+#1669 = DEFINITIONAL_REPRESENTATION('',(#1670),#1674);+#1670 = LINE('',#1671,#1672);+#1671 = CARTESIAN_POINT('',(0.,0.));+#1672 = VECTOR('',#1673,1.);+#1673 = DIRECTION('',(1.,0.));+#1674 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1675 = ORIENTED_EDGE('',*,*,#1676,.T.);+#1676 = EDGE_CURVE('',#1654,#1677,#1679,.T.);+#1677 = VERTEX_POINT('',#1678);+#1678 = CARTESIAN_POINT('',(-1.775,-2.45,1.025));+#1679 = SURFACE_CURVE('',#1680,(#1684,#1691),.PCURVE_S1.);+#1680 = LINE('',#1681,#1682);+#1681 = CARTESIAN_POINT('',(1.775,-2.45,1.025));+#1682 = VECTOR('',#1683,1.);+#1683 = DIRECTION('',(-1.,-1.110223024625E-16,0.));+#1684 = PCURVE('',#1145,#1685);+#1685 = DEFINITIONAL_REPRESENTATION('',(#1686),#1690);+#1686 = LINE('',#1687,#1688);+#1687 = CARTESIAN_POINT('',(1.775,4.8625));+#1688 = VECTOR('',#1689,1.);+#1689 = DIRECTION('',(-1.,-1.859989286E-19));+#1690 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1691 = PCURVE('',#660,#1692);+#1692 = DEFINITIONAL_REPRESENTATION('',(#1693),#1697);+#1693 = LINE('',#1694,#1695);+#1694 = CARTESIAN_POINT('',(0.,0.));+#1695 = VECTOR('',#1696,1.);+#1696 = DIRECTION('',(1.,0.));+#1697 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1698 = ORIENTED_EDGE('',*,*,#1699,.T.);+#1699 = EDGE_CURVE('',#1677,#1700,#1702,.T.);+#1700 = VERTEX_POINT('',#1701);+#1701 = CARTESIAN_POINT('',(-1.95,-2.275,1.025));+#1702 = SURFACE_CURVE('',#1703,(#1707,#1714),.PCURVE_S1.);+#1703 = LINE('',#1704,#1705);+#1704 = CARTESIAN_POINT('',(-1.775,-2.45,1.025));+#1705 = VECTOR('',#1706,1.);+#1706 = DIRECTION('',(-0.707106781187,0.707106781187,0.));+#1707 = PCURVE('',#1145,#1708);+#1708 = DEFINITIONAL_REPRESENTATION('',(#1709),#1713);+#1709 = LINE('',#1710,#1711);+#1710 = CARTESIAN_POINT('',(-1.775,4.8625));+#1711 = VECTOR('',#1712,1.);+#1712 = DIRECTION('',(-0.707106781187,-0.707106781187));+#1713 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1714 = PCURVE('',#581,#1715);+#1715 = DEFINITIONAL_REPRESENTATION('',(#1716),#1720);+#1716 = LINE('',#1717,#1718);+#1717 = CARTESIAN_POINT('',(0.,0.));+#1718 = VECTOR('',#1719,1.);+#1719 = DIRECTION('',(1.,0.));+#1720 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1721 = ORIENTED_EDGE('',*,*,#1722,.T.);+#1722 = EDGE_CURVE('',#1700,#1723,#1725,.T.);+#1723 = VERTEX_POINT('',#1724);+#1724 = CARTESIAN_POINT('',(-1.95,-2.11,1.025));+#1725 = SURFACE_CURVE('',#1726,(#1730,#1737),.PCURVE_S1.);+#1726 = LINE('',#1727,#1728);+#1727 = CARTESIAN_POINT('',(-1.95,-2.275,1.025));+#1728 = VECTOR('',#1729,1.);+#1729 = DIRECTION('',(-1.110223024625E-16,1.,0.));+#1730 = PCURVE('',#1145,#1731);+#1731 = DEFINITIONAL_REPRESENTATION('',(#1732),#1736);+#1732 = LINE('',#1733,#1734);+#1733 = CARTESIAN_POINT('',(-1.95,4.6875));+#1734 = VECTOR('',#1735,1.);+#1735 = DIRECTION('',(1.859989286E-19,-1.));+#1736 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1737 = PCURVE('',#502,#1738);+#1738 = DEFINITIONAL_REPRESENTATION('',(#1739),#1743);+#1739 = LINE('',#1740,#1741);+#1740 = CARTESIAN_POINT('',(0.,0.));+#1741 = VECTOR('',#1742,1.);+#1742 = DIRECTION('',(1.,0.));+#1743 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1744 = ORIENTED_EDGE('',*,*,#1745,.F.);+#1745 = EDGE_CURVE('',#1746,#1723,#1748,.T.);+#1746 = VERTEX_POINT('',#1747);+#1747 = CARTESIAN_POINT('',(-2.25,-2.11,1.025));+#1748 = SURFACE_CURVE('',#1749,(#1753,#1760),.PCURVE_S1.);+#1749 = LINE('',#1750,#1751);+#1750 = CARTESIAN_POINT('',(-2.25,-2.11,1.025));+#1751 = VECTOR('',#1752,1.);+#1752 = DIRECTION('',(1.,-1.144237745222E-17,0.));+#1753 = PCURVE('',#1145,#1754);+#1754 = DEFINITIONAL_REPRESENTATION('',(#1755),#1759);+#1755 = LINE('',#1756,#1757);+#1756 = CARTESIAN_POINT('',(-2.25,4.5225));+#1757 = VECTOR('',#1758,1.);+#1758 = DIRECTION('',(1.,1.226506788433E-16));+#1759 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1760 = PCURVE('',#1761,#1766);+#1761 = PLANE('',#1762);+#1762 = AXIS2_PLACEMENT_3D('',#1763,#1764,#1765);+#1763 = CARTESIAN_POINT('',(-2.42560961319,-2.11,0.548953137803));+#1764 = DIRECTION('',(1.144237745222E-17,1.,0.));+#1765 = DIRECTION('',(0.,-0.,1.));+#1766 = DEFINITIONAL_REPRESENTATION('',(#1767),#1771);+#1767 = LINE('',#1768,#1769);+#1768 = CARTESIAN_POINT('',(0.476046862197,0.17560961319));+#1769 = VECTOR('',#1770,1.);+#1770 = DIRECTION('',(0.,1.));+#1771 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1772 = ORIENTED_EDGE('',*,*,#1773,.T.);+#1773 = EDGE_CURVE('',#1746,#1774,#1776,.T.);+#1774 = VERTEX_POINT('',#1775);+#1775 = CARTESIAN_POINT('',(-2.25,-1.7,1.025));+#1776 = SURFACE_CURVE('',#1777,(#1781,#1788),.PCURVE_S1.);+#1777 = LINE('',#1778,#1779);+#1778 = CARTESIAN_POINT('',(-2.25,-2.11,1.025));+#1779 = VECTOR('',#1780,1.);+#1780 = DIRECTION('',(1.144237745222E-17,1.,0.));+#1781 = PCURVE('',#1145,#1782);+#1782 = DEFINITIONAL_REPRESENTATION('',(#1783),#1787);+#1783 = LINE('',#1784,#1785);+#1784 = CARTESIAN_POINT('',(-2.25,4.5225));+#1785 = VECTOR('',#1786,1.);+#1786 = DIRECTION('',(1.226506788433E-16,-1.));+#1787 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1788 = PCURVE('',#1789,#1794);+#1789 = CYLINDRICAL_SURFACE('',#1790,0.3);+#1790 = AXIS2_PLACEMENT_3D('',#1791,#1792,#1793);+#1791 = CARTESIAN_POINT('',(-2.25,-2.11,0.725));+#1792 = DIRECTION('',(-1.144237745222E-17,-1.,0.));+#1793 = DIRECTION('',(-0.984807753012,1.126854202784E-17,0.173648177667)+ );+#1794 = DEFINITIONAL_REPRESENTATION('',(#1795),#1799);+#1795 = LINE('',#1796,#1797);+#1796 = CARTESIAN_POINT('',(4.886921905584,0.));+#1797 = VECTOR('',#1798,1.);+#1798 = DIRECTION('',(0.,-1.));+#1799 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1800 = ORIENTED_EDGE('',*,*,#1801,.T.);+#1801 = EDGE_CURVE('',#1774,#1802,#1804,.T.);+#1802 = VERTEX_POINT('',#1803);+#1803 = CARTESIAN_POINT('',(-1.95,-1.7,1.025));+#1804 = SURFACE_CURVE('',#1805,(#1809,#1816),.PCURVE_S1.);+#1805 = LINE('',#1806,#1807);+#1806 = CARTESIAN_POINT('',(-2.25,-1.7,1.025));+#1807 = VECTOR('',#1808,1.);+#1808 = DIRECTION('',(1.,-1.144237745222E-17,0.));+#1809 = PCURVE('',#1145,#1810);+#1810 = DEFINITIONAL_REPRESENTATION('',(#1811),#1815);+#1811 = LINE('',#1812,#1813);+#1812 = CARTESIAN_POINT('',(-2.25,4.1125));+#1813 = VECTOR('',#1814,1.);+#1814 = DIRECTION('',(1.,1.226506788433E-16));+#1815 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1816 = PCURVE('',#1817,#1822);+#1817 = PLANE('',#1818);+#1818 = AXIS2_PLACEMENT_3D('',#1819,#1820,#1821);+#1819 = CARTESIAN_POINT('',(-2.42560961319,-1.7,0.548953137803));+#1820 = DIRECTION('',(1.144237745222E-17,1.,0.));+#1821 = DIRECTION('',(0.,-0.,1.));+#1822 = DEFINITIONAL_REPRESENTATION('',(#1823),#1827);+#1823 = LINE('',#1824,#1825);+#1824 = CARTESIAN_POINT('',(0.476046862197,0.17560961319));+#1825 = VECTOR('',#1826,1.);+#1826 = DIRECTION('',(0.,1.));+#1827 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1828 = ORIENTED_EDGE('',*,*,#1829,.T.);+#1829 = EDGE_CURVE('',#1802,#1830,#1832,.T.);+#1830 = VERTEX_POINT('',#1831);+#1831 = CARTESIAN_POINT('',(-1.95,-0.84,1.025));+#1832 = SURFACE_CURVE('',#1833,(#1837,#1844),.PCURVE_S1.);+#1833 = LINE('',#1834,#1835);+#1834 = CARTESIAN_POINT('',(-1.95,-2.275,1.025));+#1835 = VECTOR('',#1836,1.);+#1836 = DIRECTION('',(-1.110223024625E-16,1.,0.));+#1837 = PCURVE('',#1145,#1838);+#1838 = DEFINITIONAL_REPRESENTATION('',(#1839),#1843);+#1839 = LINE('',#1840,#1841);+#1840 = CARTESIAN_POINT('',(-1.95,4.6875));+#1841 = VECTOR('',#1842,1.);+#1842 = DIRECTION('',(1.859989286E-19,-1.));+#1843 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1844 = PCURVE('',#446,#1845);+#1845 = DEFINITIONAL_REPRESENTATION('',(#1846),#1850);+#1846 = LINE('',#1847,#1848);+#1847 = CARTESIAN_POINT('',(0.,0.));+#1848 = VECTOR('',#1849,1.);+#1849 = DIRECTION('',(1.,0.));+#1850 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1851 = ORIENTED_EDGE('',*,*,#1852,.F.);+#1852 = EDGE_CURVE('',#1853,#1830,#1855,.T.);+#1853 = VERTEX_POINT('',#1854);+#1854 = CARTESIAN_POINT('',(-2.25,-0.84,1.025));+#1855 = SURFACE_CURVE('',#1856,(#1860,#1867),.PCURVE_S1.);+#1856 = LINE('',#1857,#1858);+#1857 = CARTESIAN_POINT('',(-2.25,-0.84,1.025));+#1858 = VECTOR('',#1859,1.);+#1859 = DIRECTION('',(1.,-1.144237745222E-17,0.));+#1860 = PCURVE('',#1145,#1861);+#1861 = DEFINITIONAL_REPRESENTATION('',(#1862),#1866);+#1862 = LINE('',#1863,#1864);+#1863 = CARTESIAN_POINT('',(-2.25,3.2525));+#1864 = VECTOR('',#1865,1.);+#1865 = DIRECTION('',(1.,1.226506788433E-16));+#1866 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1867 = PCURVE('',#1868,#1873);+#1868 = PLANE('',#1869);+#1869 = AXIS2_PLACEMENT_3D('',#1870,#1871,#1872);+#1870 = CARTESIAN_POINT('',(-2.42560961319,-0.84,0.548953137803));+#1871 = DIRECTION('',(1.144237745222E-17,1.,0.));+#1872 = DIRECTION('',(0.,-0.,1.));+#1873 = DEFINITIONAL_REPRESENTATION('',(#1874),#1878);+#1874 = LINE('',#1875,#1876);+#1875 = CARTESIAN_POINT('',(0.476046862197,0.17560961319));+#1876 = VECTOR('',#1877,1.);+#1877 = DIRECTION('',(0.,1.));+#1878 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1879 = ORIENTED_EDGE('',*,*,#1880,.T.);+#1880 = EDGE_CURVE('',#1853,#1881,#1883,.T.);+#1881 = VERTEX_POINT('',#1882);+#1882 = CARTESIAN_POINT('',(-2.25,-0.43,1.025));+#1883 = SURFACE_CURVE('',#1884,(#1888,#1895),.PCURVE_S1.);+#1884 = LINE('',#1885,#1886);+#1885 = CARTESIAN_POINT('',(-2.25,-0.84,1.025));+#1886 = VECTOR('',#1887,1.);+#1887 = DIRECTION('',(1.144237745222E-17,1.,0.));+#1888 = PCURVE('',#1145,#1889);+#1889 = DEFINITIONAL_REPRESENTATION('',(#1890),#1894);+#1890 = LINE('',#1891,#1892);+#1891 = CARTESIAN_POINT('',(-2.25,3.2525));+#1892 = VECTOR('',#1893,1.);+#1893 = DIRECTION('',(1.226506788433E-16,-1.));+#1894 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1895 = PCURVE('',#1896,#1901);+#1896 = CYLINDRICAL_SURFACE('',#1897,0.3);+#1897 = AXIS2_PLACEMENT_3D('',#1898,#1899,#1900);+#1898 = CARTESIAN_POINT('',(-2.25,-0.84,0.725));+#1899 = DIRECTION('',(-1.144237745222E-17,-1.,0.));+#1900 = DIRECTION('',(-0.984807753012,1.126854202784E-17,0.173648177667)+ );+#1901 = DEFINITIONAL_REPRESENTATION('',(#1902),#1906);+#1902 = LINE('',#1903,#1904);+#1903 = CARTESIAN_POINT('',(4.886921905584,0.));+#1904 = VECTOR('',#1905,1.);+#1905 = DIRECTION('',(0.,-1.));+#1906 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1907 = ORIENTED_EDGE('',*,*,#1908,.T.);+#1908 = EDGE_CURVE('',#1881,#1909,#1911,.T.);+#1909 = VERTEX_POINT('',#1910);+#1910 = CARTESIAN_POINT('',(-1.95,-0.43,1.025));+#1911 = SURFACE_CURVE('',#1912,(#1916,#1923),.PCURVE_S1.);+#1912 = LINE('',#1913,#1914);+#1913 = CARTESIAN_POINT('',(-2.25,-0.43,1.025));+#1914 = VECTOR('',#1915,1.);+#1915 = DIRECTION('',(1.,-1.144237745222E-17,0.));+#1916 = PCURVE('',#1145,#1917);+#1917 = DEFINITIONAL_REPRESENTATION('',(#1918),#1922);+#1918 = LINE('',#1919,#1920);+#1919 = CARTESIAN_POINT('',(-2.25,2.8425));+#1920 = VECTOR('',#1921,1.);+#1921 = DIRECTION('',(1.,1.226506788433E-16));+#1922 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1923 = PCURVE('',#1924,#1929);+#1924 = PLANE('',#1925);+#1925 = AXIS2_PLACEMENT_3D('',#1926,#1927,#1928);+#1926 = CARTESIAN_POINT('',(-2.42560961319,-0.43,0.548953137803));+#1927 = DIRECTION('',(1.144237745222E-17,1.,0.));+#1928 = DIRECTION('',(0.,-0.,1.));+#1929 = DEFINITIONAL_REPRESENTATION('',(#1930),#1934);+#1930 = LINE('',#1931,#1932);+#1931 = CARTESIAN_POINT('',(0.476046862197,0.17560961319));+#1932 = VECTOR('',#1933,1.);+#1933 = DIRECTION('',(0.,1.));+#1934 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1935 = ORIENTED_EDGE('',*,*,#1936,.T.);+#1936 = EDGE_CURVE('',#1909,#1937,#1939,.T.);+#1937 = VERTEX_POINT('',#1938);+#1938 = CARTESIAN_POINT('',(-1.95,0.43,1.025));+#1939 = SURFACE_CURVE('',#1940,(#1944,#1951),.PCURVE_S1.);+#1940 = LINE('',#1941,#1942);+#1941 = CARTESIAN_POINT('',(-1.95,-2.275,1.025));+#1942 = VECTOR('',#1943,1.);+#1943 = DIRECTION('',(-1.110223024625E-16,1.,0.));+#1944 = PCURVE('',#1145,#1945);+#1945 = DEFINITIONAL_REPRESENTATION('',(#1946),#1950);+#1946 = LINE('',#1947,#1948);+#1947 = CARTESIAN_POINT('',(-1.95,4.6875));+#1948 = VECTOR('',#1949,1.);+#1949 = DIRECTION('',(1.859989286E-19,-1.));+#1950 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1951 = PCURVE('',#390,#1952);+#1952 = DEFINITIONAL_REPRESENTATION('',(#1953),#1957);+#1953 = LINE('',#1954,#1955);+#1954 = CARTESIAN_POINT('',(0.,0.));+#1955 = VECTOR('',#1956,1.);+#1956 = DIRECTION('',(1.,0.));+#1957 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1958 = ORIENTED_EDGE('',*,*,#1959,.F.);+#1959 = EDGE_CURVE('',#1960,#1937,#1962,.T.);+#1960 = VERTEX_POINT('',#1961);+#1961 = CARTESIAN_POINT('',(-2.25,0.43,1.025));+#1962 = SURFACE_CURVE('',#1963,(#1967,#1974),.PCURVE_S1.);+#1963 = LINE('',#1964,#1965);+#1964 = CARTESIAN_POINT('',(-2.25,0.43,1.025));+#1965 = VECTOR('',#1966,1.);+#1966 = DIRECTION('',(1.,-1.144237745222E-17,0.));+#1967 = PCURVE('',#1145,#1968);+#1968 = DEFINITIONAL_REPRESENTATION('',(#1969),#1973);+#1969 = LINE('',#1970,#1971);+#1970 = CARTESIAN_POINT('',(-2.25,1.9825));+#1971 = VECTOR('',#1972,1.);+#1972 = DIRECTION('',(1.,1.226506788433E-16));+#1973 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1974 = PCURVE('',#1975,#1980);+#1975 = PLANE('',#1976);+#1976 = AXIS2_PLACEMENT_3D('',#1977,#1978,#1979);+#1977 = CARTESIAN_POINT('',(-2.42560961319,0.43,0.548953137803));+#1978 = DIRECTION('',(1.144237745222E-17,1.,0.));+#1979 = DIRECTION('',(0.,-0.,1.));+#1980 = DEFINITIONAL_REPRESENTATION('',(#1981),#1985);+#1981 = LINE('',#1982,#1983);+#1982 = CARTESIAN_POINT('',(0.476046862197,0.17560961319));+#1983 = VECTOR('',#1984,1.);+#1984 = DIRECTION('',(0.,1.));+#1985 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1986 = ORIENTED_EDGE('',*,*,#1987,.T.);+#1987 = EDGE_CURVE('',#1960,#1988,#1990,.T.);+#1988 = VERTEX_POINT('',#1989);+#1989 = CARTESIAN_POINT('',(-2.25,0.84,1.025));+#1990 = SURFACE_CURVE('',#1991,(#1995,#2002),.PCURVE_S1.);+#1991 = LINE('',#1992,#1993);+#1992 = CARTESIAN_POINT('',(-2.25,0.43,1.025));+#1993 = VECTOR('',#1994,1.);+#1994 = DIRECTION('',(1.144237745222E-17,1.,0.));+#1995 = PCURVE('',#1145,#1996);+#1996 = DEFINITIONAL_REPRESENTATION('',(#1997),#2001);+#1997 = LINE('',#1998,#1999);+#1998 = CARTESIAN_POINT('',(-2.25,1.9825));+#1999 = VECTOR('',#2000,1.);+#2000 = DIRECTION('',(1.226506788433E-16,-1.));+#2001 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2002 = PCURVE('',#2003,#2008);+#2003 = CYLINDRICAL_SURFACE('',#2004,0.3);+#2004 = AXIS2_PLACEMENT_3D('',#2005,#2006,#2007);+#2005 = CARTESIAN_POINT('',(-2.25,0.43,0.725));+#2006 = DIRECTION('',(-1.144237745222E-17,-1.,0.));+#2007 = DIRECTION('',(-0.984807753012,1.126854202784E-17,0.173648177667)+ );+#2008 = DEFINITIONAL_REPRESENTATION('',(#2009),#2013);+#2009 = LINE('',#2010,#2011);+#2010 = CARTESIAN_POINT('',(4.886921905584,0.));+#2011 = VECTOR('',#2012,1.);+#2012 = DIRECTION('',(0.,-1.));+#2013 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2014 = ORIENTED_EDGE('',*,*,#2015,.T.);+#2015 = EDGE_CURVE('',#1988,#2016,#2018,.T.);+#2016 = VERTEX_POINT('',#2017);+#2017 = CARTESIAN_POINT('',(-1.95,0.84,1.025));+#2018 = SURFACE_CURVE('',#2019,(#2023,#2030),.PCURVE_S1.);+#2019 = LINE('',#2020,#2021);+#2020 = CARTESIAN_POINT('',(-2.25,0.84,1.025));+#2021 = VECTOR('',#2022,1.);+#2022 = DIRECTION('',(1.,-1.144237745222E-17,0.));+#2023 = PCURVE('',#1145,#2024);+#2024 = DEFINITIONAL_REPRESENTATION('',(#2025),#2029);+#2025 = LINE('',#2026,#2027);+#2026 = CARTESIAN_POINT('',(-2.25,1.5725));+#2027 = VECTOR('',#2028,1.);+#2028 = DIRECTION('',(1.,1.226506788433E-16));+#2029 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2030 = PCURVE('',#2031,#2036);+#2031 = PLANE('',#2032);+#2032 = AXIS2_PLACEMENT_3D('',#2033,#2034,#2035);+#2033 = CARTESIAN_POINT('',(-2.42560961319,0.84,0.548953137803));+#2034 = DIRECTION('',(1.144237745222E-17,1.,0.));+#2035 = DIRECTION('',(0.,-0.,1.));+#2036 = DEFINITIONAL_REPRESENTATION('',(#2037),#2041);+#2037 = LINE('',#2038,#2039);+#2038 = CARTESIAN_POINT('',(0.476046862197,0.17560961319));+#2039 = VECTOR('',#2040,1.);+#2040 = DIRECTION('',(0.,1.));+#2041 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2042 = ORIENTED_EDGE('',*,*,#2043,.T.);+#2043 = EDGE_CURVE('',#2016,#2044,#2046,.T.);+#2044 = VERTEX_POINT('',#2045);+#2045 = CARTESIAN_POINT('',(-1.95,1.7,1.025));+#2046 = SURFACE_CURVE('',#2047,(#2051,#2058),.PCURVE_S1.);+#2047 = LINE('',#2048,#2049);+#2048 = CARTESIAN_POINT('',(-1.95,-2.275,1.025));+#2049 = VECTOR('',#2050,1.);+#2050 = DIRECTION('',(-1.110223024625E-16,1.,0.));+#2051 = PCURVE('',#1145,#2052);+#2052 = DEFINITIONAL_REPRESENTATION('',(#2053),#2057);+#2053 = LINE('',#2054,#2055);+#2054 = CARTESIAN_POINT('',(-1.95,4.6875));+#2055 = VECTOR('',#2056,1.);+#2056 = DIRECTION('',(1.859989286E-19,-1.));+#2057 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2058 = PCURVE('',#334,#2059);+#2059 = DEFINITIONAL_REPRESENTATION('',(#2060),#2064);+#2060 = LINE('',#2061,#2062);+#2061 = CARTESIAN_POINT('',(0.,0.));+#2062 = VECTOR('',#2063,1.);+#2063 = DIRECTION('',(1.,0.));+#2064 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2065 = ORIENTED_EDGE('',*,*,#2066,.F.);+#2066 = EDGE_CURVE('',#2067,#2044,#2069,.T.);+#2067 = VERTEX_POINT('',#2068);+#2068 = CARTESIAN_POINT('',(-2.25,1.7,1.025));+#2069 = SURFACE_CURVE('',#2070,(#2074,#2081),.PCURVE_S1.);+#2070 = LINE('',#2071,#2072);+#2071 = CARTESIAN_POINT('',(-2.25,1.7,1.025));+#2072 = VECTOR('',#2073,1.);+#2073 = DIRECTION('',(1.,-1.144237745222E-17,0.));+#2074 = PCURVE('',#1145,#2075);+#2075 = DEFINITIONAL_REPRESENTATION('',(#2076),#2080);+#2076 = LINE('',#2077,#2078);+#2077 = CARTESIAN_POINT('',(-2.25,0.7125));+#2078 = VECTOR('',#2079,1.);+#2079 = DIRECTION('',(1.,1.226506788433E-16));+#2080 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2081 = PCURVE('',#2082,#2087);+#2082 = PLANE('',#2083);+#2083 = AXIS2_PLACEMENT_3D('',#2084,#2085,#2086);+#2084 = CARTESIAN_POINT('',(-2.42560961319,1.7,0.548953137803));+#2085 = DIRECTION('',(1.144237745222E-17,1.,0.));+#2086 = DIRECTION('',(0.,-0.,1.));+#2087 = DEFINITIONAL_REPRESENTATION('',(#2088),#2092);+#2088 = LINE('',#2089,#2090);+#2089 = CARTESIAN_POINT('',(0.476046862197,0.17560961319));+#2090 = VECTOR('',#2091,1.);+#2091 = DIRECTION('',(0.,1.));+#2092 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2093 = ORIENTED_EDGE('',*,*,#2094,.T.);+#2094 = EDGE_CURVE('',#2067,#2095,#2097,.T.);+#2095 = VERTEX_POINT('',#2096);+#2096 = CARTESIAN_POINT('',(-2.25,2.11,1.025));+#2097 = SURFACE_CURVE('',#2098,(#2102,#2109),.PCURVE_S1.);+#2098 = LINE('',#2099,#2100);+#2099 = CARTESIAN_POINT('',(-2.25,1.7,1.025));+#2100 = VECTOR('',#2101,1.);+#2101 = DIRECTION('',(1.144237745222E-17,1.,0.));+#2102 = PCURVE('',#1145,#2103);+#2103 = DEFINITIONAL_REPRESENTATION('',(#2104),#2108);+#2104 = LINE('',#2105,#2106);+#2105 = CARTESIAN_POINT('',(-2.25,0.7125));+#2106 = VECTOR('',#2107,1.);+#2107 = DIRECTION('',(1.226506788433E-16,-1.));+#2108 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2109 = PCURVE('',#2110,#2115);+#2110 = CYLINDRICAL_SURFACE('',#2111,0.3);+#2111 = AXIS2_PLACEMENT_3D('',#2112,#2113,#2114);+#2112 = CARTESIAN_POINT('',(-2.25,1.7,0.725));+#2113 = DIRECTION('',(-1.144237745222E-17,-1.,0.));+#2114 = DIRECTION('',(-0.984807753012,1.126854202784E-17,0.173648177667)+ );+#2115 = DEFINITIONAL_REPRESENTATION('',(#2116),#2120);+#2116 = LINE('',#2117,#2118);+#2117 = CARTESIAN_POINT('',(4.886921905584,0.));+#2118 = VECTOR('',#2119,1.);+#2119 = DIRECTION('',(0.,-1.));+#2120 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2121 = ORIENTED_EDGE('',*,*,#2122,.T.);+#2122 = EDGE_CURVE('',#2095,#2123,#2125,.T.);+#2123 = VERTEX_POINT('',#2124);+#2124 = CARTESIAN_POINT('',(-1.95,2.11,1.025));+#2125 = SURFACE_CURVE('',#2126,(#2130,#2137),.PCURVE_S1.);+#2126 = LINE('',#2127,#2128);+#2127 = CARTESIAN_POINT('',(-2.25,2.11,1.025));+#2128 = VECTOR('',#2129,1.);+#2129 = DIRECTION('',(1.,-1.144237745222E-17,0.));+#2130 = PCURVE('',#1145,#2131);+#2131 = DEFINITIONAL_REPRESENTATION('',(#2132),#2136);+#2132 = LINE('',#2133,#2134);+#2133 = CARTESIAN_POINT('',(-2.25,0.3025));+#2134 = VECTOR('',#2135,1.);+#2135 = DIRECTION('',(1.,1.226506788433E-16));+#2136 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2137 = PCURVE('',#2138,#2143);+#2138 = PLANE('',#2139);+#2139 = AXIS2_PLACEMENT_3D('',#2140,#2141,#2142);+#2140 = CARTESIAN_POINT('',(-2.42560961319,2.11,0.548953137803));+#2141 = DIRECTION('',(1.144237745222E-17,1.,0.));+#2142 = DIRECTION('',(0.,-0.,1.));+#2143 = DEFINITIONAL_REPRESENTATION('',(#2144),#2148);+#2144 = LINE('',#2145,#2146);+#2145 = CARTESIAN_POINT('',(0.476046862197,0.17560961319));+#2146 = VECTOR('',#2147,1.);+#2147 = DIRECTION('',(0.,1.));+#2148 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2149 = ORIENTED_EDGE('',*,*,#2150,.T.);+#2150 = EDGE_CURVE('',#2123,#1161,#2151,.T.);+#2151 = SURFACE_CURVE('',#2152,(#2156,#2163),.PCURVE_S1.);+#2152 = LINE('',#2153,#2154);+#2153 = CARTESIAN_POINT('',(-1.95,-2.275,1.025));+#2154 = VECTOR('',#2155,1.);+#2155 = DIRECTION('',(-1.110223024625E-16,1.,0.));+#2156 = PCURVE('',#1145,#2157);+#2157 = DEFINITIONAL_REPRESENTATION('',(#2158),#2162);+#2158 = LINE('',#2159,#2160);+#2159 = CARTESIAN_POINT('',(-1.95,4.6875));+#2160 = VECTOR('',#2161,1.);+#2161 = DIRECTION('',(1.859989286E-19,-1.));+#2162 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2163 = PCURVE('',#278,#2164);+#2164 = DEFINITIONAL_REPRESENTATION('',(#2165),#2169);+#2165 = LINE('',#2166,#2167);+#2166 = CARTESIAN_POINT('',(0.,0.));+#2167 = VECTOR('',#2168,1.);+#2168 = DIRECTION('',(1.,0.));+#2169 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2170 = FACE_BOUND('',#2171,.F.);+#2171 = EDGE_LOOP('',(#2172,#2202,#2230,#2258,#2286,#2314,#2342,#2370));+#2172 = ORIENTED_EDGE('',*,*,#2173,.F.);+#2173 = EDGE_CURVE('',#2174,#2176,#2178,.T.);+#2174 = VERTEX_POINT('',#2175);+#2175 = CARTESIAN_POINT('',(1.875,2.2375,1.025));+#2176 = VERTEX_POINT('',#2177);+#2177 = CARTESIAN_POINT('',(1.875,-2.2375,1.025));+#2178 = SURFACE_CURVE('',#2179,(#2183,#2190),.PCURVE_S1.);+#2179 = LINE('',#2180,#2181);+#2180 = CARTESIAN_POINT('',(1.875,2.2375,1.025));+#2181 = VECTOR('',#2182,1.);+#2182 = DIRECTION('',(0.,-1.,0.));+#2183 = PCURVE('',#1145,#2184);+#2184 = DEFINITIONAL_REPRESENTATION('',(#2185),#2189);+#2185 = LINE('',#2186,#2187);+#2186 = CARTESIAN_POINT('',(1.875,0.175));+#2187 = VECTOR('',#2188,1.);+#2188 = DIRECTION('',(-1.112083013911E-16,1.));+#2189 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2190 = PCURVE('',#2191,#2196);+#2191 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,(+ (#2192,#2193)+ ,(#2194,#2195+ )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,4.475),(0.,1.),+ .PIECEWISE_BEZIER_KNOTS.);+#2192 = CARTESIAN_POINT('',(1.875,2.2375,1.025));+#2193 = CARTESIAN_POINT('',(1.760171280765,2.180085640382,1.75));+#2194 = CARTESIAN_POINT('',(1.875,-2.2375,1.025));+#2195 = CARTESIAN_POINT('',(1.760171280765,-2.180085640382,1.75));+#2196 = DEFINITIONAL_REPRESENTATION('',(#2197),#2201);+#2197 = LINE('',#2198,#2199);+#2198 = CARTESIAN_POINT('',(-3.069575063905E-17,1.607055245639E-16));+#2199 = VECTOR('',#2200,1.);+#2200 = DIRECTION('',(1.,-8.164441876029E-16));+#2201 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2202 = ORIENTED_EDGE('',*,*,#2203,.F.);+#2203 = EDGE_CURVE('',#2204,#2174,#2206,.T.);+#2204 = VERTEX_POINT('',#2205);+#2205 = CARTESIAN_POINT('',(1.7375,2.375,1.025));+#2206 = SURFACE_CURVE('',#2207,(#2211,#2218),.PCURVE_S1.);+#2207 = LINE('',#2208,#2209);+#2208 = CARTESIAN_POINT('',(1.7375,2.375,1.025));+#2209 = VECTOR('',#2210,1.);+#2210 = DIRECTION('',(0.707106781187,-0.707106781187,0.));+#2211 = PCURVE('',#1145,#2212);+#2212 = DEFINITIONAL_REPRESENTATION('',(#2213),#2217);+#2213 = LINE('',#2214,#2215);+#2214 = CARTESIAN_POINT('',(1.7375,3.75E-02));+#2215 = VECTOR('',#2216,1.);+#2216 = DIRECTION('',(0.707106781187,0.707106781187));+#2217 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2218 = PCURVE('',#2219,#2224);+#2219 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,(+ (#2220,#2221)+ ,(#2222,#2223+ )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,0.194454364826),(0.,1.)+ ,.PIECEWISE_BEZIER_KNOTS.);+#2220 = CARTESIAN_POINT('',(1.7375,2.375,1.025));+#2221 = CARTESIAN_POINT('',(1.680085640382,2.260171280765,1.75));+#2222 = CARTESIAN_POINT('',(1.875,2.2375,1.025));+#2223 = CARTESIAN_POINT('',(1.760171280765,2.180085640382,1.75));+#2224 = DEFINITIONAL_REPRESENTATION('',(#2225),#2229);+#2225 = LINE('',#2226,#2227);+#2226 = CARTESIAN_POINT('',(2.738217532698E-16,4.809419873548E-17));+#2227 = VECTOR('',#2228,1.);+#2228 = DIRECTION('',(1.,-5.460298955199E-16));+#2229 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2230 = ORIENTED_EDGE('',*,*,#2231,.F.);+#2231 = EDGE_CURVE('',#2232,#2204,#2234,.T.);+#2232 = VERTEX_POINT('',#2233);+#2233 = CARTESIAN_POINT('',(-1.7375,2.375,1.025));+#2234 = SURFACE_CURVE('',#2235,(#2239,#2246),.PCURVE_S1.);+#2235 = LINE('',#2236,#2237);+#2236 = CARTESIAN_POINT('',(-1.7375,2.375,1.025));+#2237 = VECTOR('',#2238,1.);+#2238 = DIRECTION('',(1.,1.110223024625E-16,0.));+#2239 = PCURVE('',#1145,#2240);+#2240 = DEFINITIONAL_REPRESENTATION('',(#2241),#2245);+#2241 = LINE('',#2242,#2243);+#2242 = CARTESIAN_POINT('',(-1.7375,3.75E-02));+#2243 = VECTOR('',#2244,1.);+#2244 = DIRECTION('',(1.,1.859989286E-19));+#2245 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2246 = PCURVE('',#2247,#2252);+#2247 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,(+ (#2248,#2249)+ ,(#2250,#2251+ )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,3.475),(0.,1.),+ .PIECEWISE_BEZIER_KNOTS.);+#2248 = CARTESIAN_POINT('',(-1.7375,2.375,1.025));+#2249 = CARTESIAN_POINT('',(-1.680085640382,2.260171280765,1.75));+#2250 = CARTESIAN_POINT('',(1.7375,2.375,1.025));+#2251 = CARTESIAN_POINT('',(1.680085640382,2.260171280765,1.75));+#2252 = DEFINITIONAL_REPRESENTATION('',(#2253),#2257);+#2253 = LINE('',#2254,#2255);+#2254 = CARTESIAN_POINT('',(-4.2621274328E-17,2.564255928447E-17));+#2255 = VECTOR('',#2256,1.);+#2256 = DIRECTION('',(1.,-5.447280452419E-17));+#2257 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2258 = ORIENTED_EDGE('',*,*,#2259,.F.);+#2259 = EDGE_CURVE('',#2260,#2232,#2262,.T.);+#2260 = VERTEX_POINT('',#2261);+#2261 = CARTESIAN_POINT('',(-1.875,2.2375,1.025));+#2262 = SURFACE_CURVE('',#2263,(#2267,#2274),.PCURVE_S1.);+#2263 = LINE('',#2264,#2265);+#2264 = CARTESIAN_POINT('',(-1.875,2.2375,1.025));+#2265 = VECTOR('',#2266,1.);+#2266 = DIRECTION('',(0.707106781187,0.707106781187,0.));+#2267 = PCURVE('',#1145,#2268);+#2268 = DEFINITIONAL_REPRESENTATION('',(#2269),#2273);+#2269 = LINE('',#2270,#2271);+#2270 = CARTESIAN_POINT('',(-1.875,0.175));+#2271 = VECTOR('',#2272,1.);+#2272 = DIRECTION('',(0.707106781187,-0.707106781187));+#2273 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2274 = PCURVE('',#2275,#2280);+#2275 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,(+ (#2276,#2277)+ ,(#2278,#2279+ )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,0.194454364826),(0.,1.)+ ,.PIECEWISE_BEZIER_KNOTS.);+#2276 = CARTESIAN_POINT('',(-1.875,2.2375,1.025));+#2277 = CARTESIAN_POINT('',(-1.760171280765,2.180085640382,1.75));+#2278 = CARTESIAN_POINT('',(-1.7375,2.375,1.025));+#2279 = CARTESIAN_POINT('',(-1.680085640382,2.260171280765,1.75));+#2280 = DEFINITIONAL_REPRESENTATION('',(#2281),#2285);+#2281 = LINE('',#2282,#2283);+#2282 = CARTESIAN_POINT('',(-1.958481907314E-16,1.270855007249E-17));+#2283 = VECTOR('',#2284,1.);+#2284 = DIRECTION('',(1.,3.638625729945E-16));+#2285 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2286 = ORIENTED_EDGE('',*,*,#2287,.F.);+#2287 = EDGE_CURVE('',#2288,#2260,#2290,.T.);+#2288 = VERTEX_POINT('',#2289);+#2289 = CARTESIAN_POINT('',(-1.875,-2.2375,1.025));+#2290 = SURFACE_CURVE('',#2291,(#2295,#2302),.PCURVE_S1.);+#2291 = LINE('',#2292,#2293);+#2292 = CARTESIAN_POINT('',(-1.875,-2.2375,1.025));+#2293 = VECTOR('',#2294,1.);+#2294 = DIRECTION('',(0.,1.,0.));+#2295 = PCURVE('',#1145,#2296);+#2296 = DEFINITIONAL_REPRESENTATION('',(#2297),#2301);+#2297 = LINE('',#2298,#2299);+#2298 = CARTESIAN_POINT('',(-1.875,4.65));+#2299 = VECTOR('',#2300,1.);+#2300 = DIRECTION('',(1.112083013911E-16,-1.));+#2301 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2302 = PCURVE('',#2303,#2308);+#2303 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,(+ (#2304,#2305)+ ,(#2306,#2307+ )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,4.475),(0.,1.),+ .PIECEWISE_BEZIER_KNOTS.);+#2304 = CARTESIAN_POINT('',(-1.875,-2.2375,1.025));+#2305 = CARTESIAN_POINT('',(-1.760171280765,-2.180085640382,1.75));+#2306 = CARTESIAN_POINT('',(-1.875,2.2375,1.025));+#2307 = CARTESIAN_POINT('',(-1.760171280765,2.180085640382,1.75));+#2308 = DEFINITIONAL_REPRESENTATION('',(#2309),#2313);+#2309 = LINE('',#2310,#2311);+#2310 = CARTESIAN_POINT('',(-3.069575063905E-17,1.607055245639E-16));+#2311 = VECTOR('',#2312,1.);+#2312 = DIRECTION('',(1.,-8.164441876029E-16));+#2313 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2314 = ORIENTED_EDGE('',*,*,#2315,.F.);+#2315 = EDGE_CURVE('',#2316,#2288,#2318,.T.);+#2316 = VERTEX_POINT('',#2317);+#2317 = CARTESIAN_POINT('',(-1.7375,-2.375,1.025));+#2318 = SURFACE_CURVE('',#2319,(#2323,#2330),.PCURVE_S1.);+#2319 = LINE('',#2320,#2321);+#2320 = CARTESIAN_POINT('',(-1.7375,-2.375,1.025));+#2321 = VECTOR('',#2322,1.);+#2322 = DIRECTION('',(-0.707106781187,0.707106781187,0.));+#2323 = PCURVE('',#1145,#2324);+#2324 = DEFINITIONAL_REPRESENTATION('',(#2325),#2329);+#2325 = LINE('',#2326,#2327);+#2326 = CARTESIAN_POINT('',(-1.7375,4.7875));+#2327 = VECTOR('',#2328,1.);+#2328 = DIRECTION('',(-0.707106781187,-0.707106781187));+#2329 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2330 = PCURVE('',#2331,#2336);+#2331 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,(+ (#2332,#2333)+ ,(#2334,#2335+ )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,0.194454364826),(0.,1.)+ ,.PIECEWISE_BEZIER_KNOTS.);+#2332 = CARTESIAN_POINT('',(-1.7375,-2.375,1.025));+#2333 = CARTESIAN_POINT('',(-1.680085640382,-2.260171280765,1.75));+#2334 = CARTESIAN_POINT('',(-1.875,-2.2375,1.025));+#2335 = CARTESIAN_POINT('',(-1.760171280765,-2.180085640382,1.75));+#2336 = DEFINITIONAL_REPRESENTATION('',(#2337),#2341);+#2337 = LINE('',#2338,#2339);+#2338 = CARTESIAN_POINT('',(2.738217532698E-16,4.809419873548E-17));+#2339 = VECTOR('',#2340,1.);+#2340 = DIRECTION('',(1.,-5.460298955199E-16));+#2341 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2342 = ORIENTED_EDGE('',*,*,#2343,.F.);+#2343 = EDGE_CURVE('',#2344,#2316,#2346,.T.);+#2344 = VERTEX_POINT('',#2345);+#2345 = CARTESIAN_POINT('',(1.7375,-2.375,1.025));+#2346 = SURFACE_CURVE('',#2347,(#2351,#2358),.PCURVE_S1.);+#2347 = LINE('',#2348,#2349);+#2348 = CARTESIAN_POINT('',(1.7375,-2.375,1.025));+#2349 = VECTOR('',#2350,1.);+#2350 = DIRECTION('',(-1.,-1.110223024625E-16,0.));+#2351 = PCURVE('',#1145,#2352);+#2352 = DEFINITIONAL_REPRESENTATION('',(#2353),#2357);+#2353 = LINE('',#2354,#2355);+#2354 = CARTESIAN_POINT('',(1.7375,4.7875));+#2355 = VECTOR('',#2356,1.);+#2356 = DIRECTION('',(-1.,-1.859989286E-19));+#2357 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2358 = PCURVE('',#2359,#2364);+#2359 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,(+ (#2360,#2361)+ ,(#2362,#2363+ )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,3.475),(0.,1.),+ .PIECEWISE_BEZIER_KNOTS.);+#2360 = CARTESIAN_POINT('',(1.7375,-2.375,1.025));+#2361 = CARTESIAN_POINT('',(1.680085640382,-2.260171280765,1.75));+#2362 = CARTESIAN_POINT('',(-1.7375,-2.375,1.025));+#2363 = CARTESIAN_POINT('',(-1.680085640382,-2.260171280765,1.75));+#2364 = DEFINITIONAL_REPRESENTATION('',(#2365),#2369);+#2365 = LINE('',#2366,#2367);+#2366 = CARTESIAN_POINT('',(-4.2621274328E-17,2.564255928447E-17));+#2367 = VECTOR('',#2368,1.);+#2368 = DIRECTION('',(1.,-5.447280452419E-17));+#2369 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2370 = ORIENTED_EDGE('',*,*,#2371,.F.);+#2371 = EDGE_CURVE('',#2176,#2344,#2372,.T.);+#2372 = SURFACE_CURVE('',#2373,(#2377,#2384),.PCURVE_S1.);+#2373 = LINE('',#2374,#2375);+#2374 = CARTESIAN_POINT('',(1.875,-2.2375,1.025));+#2375 = VECTOR('',#2376,1.);+#2376 = DIRECTION('',(-0.707106781187,-0.707106781187,0.));+#2377 = PCURVE('',#1145,#2378);+#2378 = DEFINITIONAL_REPRESENTATION('',(#2379),#2383);+#2379 = LINE('',#2380,#2381);+#2380 = CARTESIAN_POINT('',(1.875,4.65));+#2381 = VECTOR('',#2382,1.);+#2382 = DIRECTION('',(-0.707106781187,0.707106781187));+#2383 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2384 = PCURVE('',#2385,#2390);+#2385 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,(+ (#2386,#2387)+ ,(#2388,#2389+ )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,0.194454364826),(0.,1.)+ ,.PIECEWISE_BEZIER_KNOTS.);+#2386 = CARTESIAN_POINT('',(1.875,-2.2375,1.025));+#2387 = CARTESIAN_POINT('',(1.760171280765,-2.180085640382,1.75));+#2388 = CARTESIAN_POINT('',(1.7375,-2.375,1.025));+#2389 = CARTESIAN_POINT('',(1.680085640382,-2.260171280765,1.75));+#2390 = DEFINITIONAL_REPRESENTATION('',(#2391),#2395);+#2391 = LINE('',#2392,#2393);+#2392 = CARTESIAN_POINT('',(-1.958481907314E-16,1.270855007249E-17));+#2393 = VECTOR('',#2394,1.);+#2394 = DIRECTION('',(1.,3.638625729945E-16));+#2395 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2396 = ADVANCED_FACE('',(#2397),#2385,.F.);+#2397 = FACE_BOUND('',#2398,.F.);+#2398 = EDGE_LOOP('',(#2399,#2400,#2422,#2449));+#2399 = ORIENTED_EDGE('',*,*,#2371,.T.);+#2400 = ORIENTED_EDGE('',*,*,#2401,.T.);+#2401 = EDGE_CURVE('',#2344,#2402,#2404,.T.);+#2402 = VERTEX_POINT('',#2403);+#2403 = CARTESIAN_POINT('',(1.680085640382,-2.260171280765,1.75));+#2404 = SURFACE_CURVE('',#2405,(#2408,#2415),.PCURVE_S1.);+#2405 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#2406,#2407),.UNSPECIFIED.,.F.,+ .F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#2406 = CARTESIAN_POINT('',(1.7375,-2.375,1.025));+#2407 = CARTESIAN_POINT('',(1.680085640382,-2.260171280765,1.75));+#2408 = PCURVE('',#2385,#2409);+#2409 = DEFINITIONAL_REPRESENTATION('',(#2410),#2414);+#2410 = LINE('',#2411,#2412);+#2411 = CARTESIAN_POINT('',(0.194454364826,8.346321558809E-17));+#2412 = VECTOR('',#2413,1.);+#2413 = DIRECTION('',(-8.326672684689E-17,1.));+#2414 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2415 = PCURVE('',#2359,#2416);+#2416 = DEFINITIONAL_REPRESENTATION('',(#2417),#2421);+#2417 = LINE('',#2418,#2419);+#2418 = CARTESIAN_POINT('',(-4.2621274328E-17,2.564255928447E-17));+#2419 = VECTOR('',#2420,1.);+#2420 = DIRECTION('',(2.060577736657E-16,1.));+#2421 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2422 = ORIENTED_EDGE('',*,*,#2423,.F.);+#2423 = EDGE_CURVE('',#2424,#2402,#2426,.T.);+#2424 = VERTEX_POINT('',#2425);+#2425 = CARTESIAN_POINT('',(1.760171280765,-2.180085640382,1.75));+#2426 = SURFACE_CURVE('',#2427,(#2431,#2437),.PCURVE_S1.);+#2427 = LINE('',#2428,#2429);+#2428 = CARTESIAN_POINT('',(1.760171280765,-2.180085640382,1.75));+#2429 = VECTOR('',#2430,1.);+#2430 = DIRECTION('',(-0.707106781187,-0.707106781187,0.));+#2431 = PCURVE('',#2385,#2432);+#2432 = DEFINITIONAL_REPRESENTATION('',(#2433),#2436);+#2433 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#2434,#2435),.UNSPECIFIED.,.F.,+ .F.,(2,2),(0.,0.113258198781),.PIECEWISE_BEZIER_KNOTS.);+#2434 = CARTESIAN_POINT('',(-6.960457594574E-17,1.));+#2435 = CARTESIAN_POINT('',(0.194454364826,1.));+#2436 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2437 = PCURVE('',#2438,#2443);+#2438 = PLANE('',#2439);+#2439 = AXIS2_PLACEMENT_3D('',#2440,#2441,#2442);+#2440 = CARTESIAN_POINT('',(-1.680085640382,2.260171280765,1.75));+#2441 = DIRECTION('',(0.,0.,-1.));+#2442 = DIRECTION('',(0.596575959062,-0.802556617983,0.));+#2443 = DEFINITIONAL_REPRESENTATION('',(#2444),#2448);+#2444 = LINE('',#2445,#2446);+#2445 = CARTESIAN_POINT('',(5.615932149767,-0.112050428413));+#2446 = VECTOR('',#2447,1.);+#2447 = DIRECTION('',(0.145650320716,0.989336133008));+#2448 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2449 = ORIENTED_EDGE('',*,*,#2450,.F.);+#2450 = EDGE_CURVE('',#2176,#2424,#2451,.T.);+#2451 = SURFACE_CURVE('',#2452,(#2455,#2462),.PCURVE_S1.);+#2452 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#2453,#2454),.UNSPECIFIED.,.F.,+ .F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#2453 = CARTESIAN_POINT('',(1.875,-2.2375,1.025));+#2454 = CARTESIAN_POINT('',(1.760171280765,-2.180085640382,1.75));+#2455 = PCURVE('',#2385,#2456);+#2456 = DEFINITIONAL_REPRESENTATION('',(#2457),#2461);+#2457 = LINE('',#2458,#2459);+#2458 = CARTESIAN_POINT('',(-1.958481907314E-16,1.270855007249E-17));+#2459 = VECTOR('',#2460,1.);+#2460 = DIRECTION('',(3.933483957273E-16,1.));+#2461 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2462 = PCURVE('',#2191,#2463);+#2463 = DEFINITIONAL_REPRESENTATION('',(#2464),#2468);+#2464 = LINE('',#2465,#2466);+#2465 = CARTESIAN_POINT('',(4.475,-2.841128830464E-17));+#2466 = VECTOR('',#2467,1.);+#2467 = DIRECTION('',(0.,1.));+#2468 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2469 = ADVANCED_FACE('',(#2470,#2625,#2951,#3718,#4044,#4343,#4570,+ #4761,#5087,#5854,#6495,#6767),#2438,.F.);+#2470 = FACE_BOUND('',#2471,.F.);+#2471 = EDGE_LOOP('',(#2472,#2496,#2518,#2538,#2539,#2561,#2583,#2605));+#2472 = ORIENTED_EDGE('',*,*,#2473,.T.);+#2473 = EDGE_CURVE('',#2474,#2476,#2478,.T.);+#2474 = VERTEX_POINT('',#2475);+#2475 = CARTESIAN_POINT('',(-1.680085640382,2.260171280765,1.75));+#2476 = VERTEX_POINT('',#2477);+#2477 = CARTESIAN_POINT('',(1.680085640382,2.260171280765,1.75));+#2478 = SURFACE_CURVE('',#2479,(#2483,#2490),.PCURVE_S1.);+#2479 = LINE('',#2480,#2481);+#2480 = CARTESIAN_POINT('',(-1.680085640382,2.260171280765,1.75));+#2481 = VECTOR('',#2482,1.);+#2482 = DIRECTION('',(1.,1.110223024625E-16,0.));+#2483 = PCURVE('',#2438,#2484);+#2484 = DEFINITIONAL_REPRESENTATION('',(#2485),#2489);+#2485 = LINE('',#2486,#2487);+#2486 = CARTESIAN_POINT('',(0.,-0.));+#2487 = VECTOR('',#2488,1.);+#2488 = DIRECTION('',(0.596575959062,-0.802556617983));+#2489 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2490 = PCURVE('',#2247,#2491);+#2491 = DEFINITIONAL_REPRESENTATION('',(#2492),#2495);+#2492 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#2493,#2494),.UNSPECIFIED.,.F.,+ .F.,(2,2),(0.,3.360171280764),.PIECEWISE_BEZIER_KNOTS.);+#2493 = CARTESIAN_POINT('',(1.690560100251E-16,1.));+#2494 = CARTESIAN_POINT('',(3.475,1.));+#2495 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2496 = ORIENTED_EDGE('',*,*,#2497,.T.);+#2497 = EDGE_CURVE('',#2476,#2498,#2500,.T.);+#2498 = VERTEX_POINT('',#2499);+#2499 = CARTESIAN_POINT('',(1.760171280765,2.180085640382,1.75));+#2500 = SURFACE_CURVE('',#2501,(#2505,#2512),.PCURVE_S1.);+#2501 = LINE('',#2502,#2503);+#2502 = CARTESIAN_POINT('',(1.680085640382,2.260171280765,1.75));+#2503 = VECTOR('',#2504,1.);+#2504 = DIRECTION('',(0.707106781187,-0.707106781187,0.));+#2505 = PCURVE('',#2438,#2506);+#2506 = DEFINITIONAL_REPRESENTATION('',(#2507),#2511);+#2507 = LINE('',#2508,#2509);+#2508 = CARTESIAN_POINT('',(2.004597404435,-2.696727698935));+#2509 = VECTOR('',#2510,1.);+#2510 = DIRECTION('',(0.989336133008,-0.145650320716));+#2511 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2512 = PCURVE('',#2219,#2513);+#2513 = DEFINITIONAL_REPRESENTATION('',(#2514),#2517);+#2514 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#2515,#2516),.UNSPECIFIED.,.F.,+ .F.,(2,2),(0.,0.113258198781),.PIECEWISE_BEZIER_KNOTS.);+#2515 = CARTESIAN_POINT('',(4.744280477712E-16,1.));+#2516 = CARTESIAN_POINT('',(0.194454364826,1.));+#2517 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2518 = ORIENTED_EDGE('',*,*,#2519,.T.);+#2519 = EDGE_CURVE('',#2498,#2424,#2520,.T.);+#2520 = SURFACE_CURVE('',#2521,(#2525,#2532),.PCURVE_S1.);+#2521 = LINE('',#2522,#2523);+#2522 = CARTESIAN_POINT('',(1.760171280765,2.180085640382,1.75));+#2523 = VECTOR('',#2524,1.);+#2524 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#2525 = PCURVE('',#2438,#2526);+#2526 = DEFINITIONAL_REPRESENTATION('',(#2527),#2531);+#2527 = LINE('',#2528,#2529);+#2528 = CARTESIAN_POINT('',(2.116647832849,-2.713223791911));+#2529 = VECTOR('',#2530,1.);+#2530 = DIRECTION('',(0.802556617983,0.596575959062));+#2531 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2532 = PCURVE('',#2191,#2533);+#2533 = DEFINITIONAL_REPRESENTATION('',(#2534),#2537);+#2534 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#2535,#2536),.UNSPECIFIED.,.F.,+ .F.,(2,2),(0.,4.360171280764),.PIECEWISE_BEZIER_KNOTS.);+#2535 = CARTESIAN_POINT('',(-6.678561801727E-17,1.));+#2536 = CARTESIAN_POINT('',(4.475,1.));+#2537 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2538 = ORIENTED_EDGE('',*,*,#2423,.T.);+#2539 = ORIENTED_EDGE('',*,*,#2540,.T.);+#2540 = EDGE_CURVE('',#2402,#2541,#2543,.T.);+#2541 = VERTEX_POINT('',#2542);+#2542 = CARTESIAN_POINT('',(-1.680085640382,-2.260171280765,1.75));+#2543 = SURFACE_CURVE('',#2544,(#2548,#2555),.PCURVE_S1.);+#2544 = LINE('',#2545,#2546);+#2545 = CARTESIAN_POINT('',(1.680085640382,-2.260171280765,1.75));+#2546 = VECTOR('',#2547,1.);+#2547 = DIRECTION('',(-1.,-1.110223024625E-16,0.));+#2548 = PCURVE('',#2438,#2549);+#2549 = DEFINITIONAL_REPRESENTATION('',(#2550),#2554);+#2550 = LINE('',#2551,#2552);+#2551 = CARTESIAN_POINT('',(5.632428242743,-2.39808173319E-14));+#2552 = VECTOR('',#2553,1.);+#2553 = DIRECTION('',(-0.596575959062,0.802556617983));+#2554 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2555 = PCURVE('',#2359,#2556);+#2556 = DEFINITIONAL_REPRESENTATION('',(#2557),#2560);+#2557 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#2558,#2559),.UNSPECIFIED.,.F.,+ .F.,(2,2),(0.,3.360171280764),.PIECEWISE_BEZIER_KNOTS.);+#2558 = CARTESIAN_POINT('',(1.690560100251E-16,1.));+#2559 = CARTESIAN_POINT('',(3.475,1.));+#2560 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2561 = ORIENTED_EDGE('',*,*,#2562,.T.);+#2562 = EDGE_CURVE('',#2541,#2563,#2565,.T.);+#2563 = VERTEX_POINT('',#2564);+#2564 = CARTESIAN_POINT('',(-1.760171280765,-2.180085640382,1.75));+#2565 = SURFACE_CURVE('',#2566,(#2570,#2577),.PCURVE_S1.);+#2566 = LINE('',#2567,#2568);+#2567 = CARTESIAN_POINT('',(-1.680085640382,-2.260171280765,1.75));+#2568 = VECTOR('',#2569,1.);+#2569 = DIRECTION('',(-0.707106781187,0.707106781187,0.));+#2570 = PCURVE('',#2438,#2571);+#2571 = DEFINITIONAL_REPRESENTATION('',(#2572),#2576);+#2572 = LINE('',#2573,#2574);+#2573 = CARTESIAN_POINT('',(3.627830838308,2.696727698935));+#2574 = VECTOR('',#2575,1.);+#2575 = DIRECTION('',(-0.989336133008,0.145650320716));+#2576 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2577 = PCURVE('',#2331,#2578);+#2578 = DEFINITIONAL_REPRESENTATION('',(#2579),#2582);+#2579 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#2580,#2581),.UNSPECIFIED.,.F.,+ .F.,(2,2),(0.,0.113258198781),.PIECEWISE_BEZIER_KNOTS.);+#2580 = CARTESIAN_POINT('',(4.744280477712E-16,1.));+#2581 = CARTESIAN_POINT('',(0.194454364826,1.));+#2582 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2583 = ORIENTED_EDGE('',*,*,#2584,.T.);+#2584 = EDGE_CURVE('',#2563,#2585,#2587,.T.);+#2585 = VERTEX_POINT('',#2586);+#2586 = CARTESIAN_POINT('',(-1.760171280765,2.180085640382,1.75));+#2587 = SURFACE_CURVE('',#2588,(#2592,#2599),.PCURVE_S1.);+#2588 = LINE('',#2589,#2590);+#2589 = CARTESIAN_POINT('',(-1.760171280765,-2.180085640382,1.75));+#2590 = VECTOR('',#2591,1.);+#2591 = DIRECTION('',(-1.110223024625E-16,1.,0.));+#2592 = PCURVE('',#2438,#2593);+#2593 = DEFINITIONAL_REPRESENTATION('',(#2594),#2598);+#2594 = LINE('',#2595,#2596);+#2595 = CARTESIAN_POINT('',(3.515780409894,2.713223791911));+#2596 = VECTOR('',#2597,1.);+#2597 = DIRECTION('',(-0.802556617983,-0.596575959062));+#2598 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2599 = PCURVE('',#2303,#2600);+#2600 = DEFINITIONAL_REPRESENTATION('',(#2601),#2604);+#2601 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#2602,#2603),.UNSPECIFIED.,.F.,+ .F.,(2,2),(0.,4.360171280764),.PIECEWISE_BEZIER_KNOTS.);+#2602 = CARTESIAN_POINT('',(-6.678561801727E-17,1.));+#2603 = CARTESIAN_POINT('',(4.475,1.));+#2604 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2605 = ORIENTED_EDGE('',*,*,#2606,.T.);+#2606 = EDGE_CURVE('',#2585,#2474,#2607,.T.);+#2607 = SURFACE_CURVE('',#2608,(#2612,#2619),.PCURVE_S1.);+#2608 = LINE('',#2609,#2610);+#2609 = CARTESIAN_POINT('',(-1.760171280765,2.180085640382,1.75));+#2610 = VECTOR('',#2611,1.);+#2611 = DIRECTION('',(0.707106781187,0.707106781187,0.));+#2612 = PCURVE('',#2438,#2613);+#2613 = DEFINITIONAL_REPRESENTATION('',(#2614),#2618);+#2614 = LINE('',#2615,#2616);+#2615 = CARTESIAN_POINT('',(1.649609297621E-02,0.112050428413));+#2616 = VECTOR('',#2617,1.);+#2617 = DIRECTION('',(-0.145650320716,-0.989336133008));+#2618 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2619 = PCURVE('',#2275,#2620);+#2620 = DEFINITIONAL_REPRESENTATION('',(#2621),#2624);+#2621 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#2622,#2623),.UNSPECIFIED.,.F.,+ .F.,(2,2),(0.,0.113258198781),.PIECEWISE_BEZIER_KNOTS.);+#2622 = CARTESIAN_POINT('',(-6.960457594574E-17,1.));+#2623 = CARTESIAN_POINT('',(0.194454364826,1.));+#2624 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2625 = FACE_BOUND('',#2626,.F.);+#2626 = EDGE_LOOP('',(#2627,#2665,#2710,#2755,#2791,#2827,#2872,#2917));+#2627 = ORIENTED_EDGE('',*,*,#2628,.T.);+#2628 = EDGE_CURVE('',#2629,#2631,#2633,.T.);+#2629 = VERTEX_POINT('',#2630);+#2630 = CARTESIAN_POINT('',(0.952351787123,5.156751799116E-03,1.75));+#2631 = VERTEX_POINT('',#2632);+#2632 = CARTESIAN_POINT('',(0.934804506695,8.809450990157E-02,1.75));+#2633 = SURFACE_CURVE('',#2634,(#2640,#2649),.PCURVE_S1.);+#2634 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#2635,#2636,#2637,#2638,#2639),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#2635 = CARTESIAN_POINT('',(0.952351787123,5.156751799116E-03,1.75));+#2636 = CARTESIAN_POINT('',(0.952351787123,3.252658214706E-02,1.75));+#2637 = CARTESIAN_POINT('',(0.949440309158,5.550484979679E-02,1.75));+#2638 = CARTESIAN_POINT('',(0.943591860672,7.40347435384E-02,1.75));+#2639 = CARTESIAN_POINT('',(0.934804506695,8.809450990157E-02,1.75));+#2640 = PCURVE('',#2438,#2641);+#2641 = DEFINITIONAL_REPRESENTATION('',(#2642),#2648);+#2642 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#2643,#2644,#2645,#2646,#2647),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#2643 = CARTESIAN_POINT('',(3.380225716855,-0.767392623554));+#2644 = CARTESIAN_POINT('',(3.358259878377,-0.783720806343));+#2645 = CARTESIAN_POINT('',(3.338081599845,-0.795092462495));+#2646 = CARTESIAN_POINT('',(3.319721267228,-0.801453240588));+#2647 = CARTESIAN_POINT('',(3.30319518456,-0.802788610102));+#2648 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2649 = PCURVE('',#2650,#2657);+#2650 = SURFACE_OF_LINEAR_EXTRUSION('',#2651,#2655);+#2651 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#2652,#2653,#2654),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#2652 = CARTESIAN_POINT('',(0.934804506695,8.809450990157E-02,1.8000001)+ );+#2653 = CARTESIAN_POINT('',(0.952351787123,6.001886121749E-02,1.8000001)+ );+#2654 = CARTESIAN_POINT('',(0.952351787123,5.156751799116E-03,1.8000001)+ );+#2655 = VECTOR('',#2656,1.);+#2656 = DIRECTION('',(0.,0.,1.));+#2657 = DEFINITIONAL_REPRESENTATION('',(#2658),#2664);+#2658 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#2659,#2660,#2661,#2662,#2663),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#2659 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#2660 = CARTESIAN_POINT('',(0.750557984025,-5.00001E-02));+#2661 = CARTESIAN_POINT('',(0.500633872635,-5.00001E-02));+#2662 = CARTESIAN_POINT('',(0.250390766058,-5.00001E-02));+#2663 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#2664 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2665 = ORIENTED_EDGE('',*,*,#2666,.T.);+#2666 = EDGE_CURVE('',#2631,#2667,#2669,.T.);+#2667 = VERTEX_POINT('',#2668);+#2668 = CARTESIAN_POINT('',(0.883022124046,0.116170158586,1.75));+#2669 = SURFACE_CURVE('',#2670,(#2679,#2691),.PCURVE_S1.);+#2670 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#2671,#2672,#2673,#2674,#2675,+ #2676,#2677,#2678),.UNSPECIFIED.,.F.,.F.,(5,3,5),(0.,0.461987902767,+ 1.),.UNSPECIFIED.);+#2671 = CARTESIAN_POINT('',(0.934804506695,8.809450990157E-02,1.75));+#2672 = CARTESIAN_POINT('',(0.930752319999,9.457800861509E-02,1.75));+#2673 = CARTESIAN_POINT('',(0.926105611567,0.100065322685,1.75));+#2674 = CARTESIAN_POINT('',(0.920864179932,0.104554109044,1.75));+#2675 = CARTESIAN_POINT('',(0.90823338213,0.112107816539,1.75));+#2676 = CARTESIAN_POINT('',(0.900632489219,0.114816873729,1.75));+#2677 = CARTESIAN_POINT('',(0.892227617497,0.116170158586,1.75));+#2678 = CARTESIAN_POINT('',(0.883022124046,0.116170158586,1.75));+#2679 = PCURVE('',#2438,#2680);+#2680 = DEFINITIONAL_REPRESENTATION('',(#2681),#2690);+#2681 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#2682,#2683,#2684,#2685,#2686,+ #2687,#2688,#2689),.UNSPECIFIED.,.F.,.F.,(5,3,5),(0.,0.461987902767,+ 1.),.UNSPECIFIED.);+#2682 = CARTESIAN_POINT('',(3.30319518456,-0.802788610102));+#2683 = CARTESIAN_POINT('',(3.295574372595,-0.803404400315));+#2684 = CARTESIAN_POINT('',(3.288398377834,-0.802948753365));+#2685 = CARTESIAN_POINT('',(3.28166896053,-0.801420109745));+#2686 = CARTESIAN_POINT('',(3.268071452277,-0.795789539672));+#2687 = CARTESIAN_POINT('',(3.261362770523,-0.791305551155));+#2688 = CARTESIAN_POINT('',(3.255262538397,-0.785367502943));+#2689 = CARTESIAN_POINT('',(3.249770762312,-0.777979573251));+#2690 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2691 = PCURVE('',#2692,#2699);+#2692 = SURFACE_OF_LINEAR_EXTRUSION('',#2693,#2697);+#2693 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#2694,#2695,#2696),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#2694 = CARTESIAN_POINT('',(0.883022124046,0.116170158586,1.8000001));+#2695 = CARTESIAN_POINT('',(0.917257226268,0.116170158586,1.8000001));+#2696 = CARTESIAN_POINT('',(0.934804506695,8.809450990157E-02,1.8000001)+ );+#2697 = VECTOR('',#2698,1.);+#2698 = DIRECTION('',(0.,0.,1.));+#2699 = DEFINITIONAL_REPRESENTATION('',(#2700),#2709);+#2700 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#2701,#2702,#2703,#2704,#2705,+ #2706,#2707,#2708),.UNSPECIFIED.,.F.,.F.,(5,3,5),(0.,0.461987902767,+ 1.),.UNSPECIFIED.);+#2701 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#2702 = CARTESIAN_POINT('',(0.884535192998,-5.00001E-02));+#2703 = CARTESIAN_POINT('',(0.769035308225,-5.00001E-02));+#2704 = CARTESIAN_POINT('',(0.653517743368,-5.00001E-02));+#2705 = CARTESIAN_POINT('',(0.40347279051,-5.00001E-02));+#2706 = CARTESIAN_POINT('',(0.268945321116,-5.00001E-02));+#2707 = CARTESIAN_POINT('',(0.134445245582,-5.00001E-02));+#2708 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#2709 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2710 = ORIENTED_EDGE('',*,*,#2711,.T.);+#2711 = EDGE_CURVE('',#2667,#2712,#2714,.T.);+#2712 = VERTEX_POINT('',#2713);+#2713 = CARTESIAN_POINT('',(0.831311362949,8.809450990157E-02,1.75));+#2714 = SURFACE_CURVE('',#2715,(#2724,#2736),.PCURVE_S1.);+#2715 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#2716,#2717,#2718,#2719,#2720,+ #2721,#2722,#2723),.UNSPECIFIED.,.F.,.F.,(5,3,5),(0.,0.534013424926,+ 1.),.UNSPECIFIED.);+#2716 = CARTESIAN_POINT('',(0.883022124046,0.116170158586,1.75));+#2717 = CARTESIAN_POINT('',(0.873885078766,0.116170158586,1.75));+#2718 = CARTESIAN_POINT('',(0.865540178569,0.114836923818,1.75));+#2719 = CARTESIAN_POINT('',(0.857990722644,0.112168011466,1.75));+#2720 = CARTESIAN_POINT('',(0.845345662373,0.104670461086,1.75));+#2721 = CARTESIAN_POINT('',(0.840059976365,0.10016025603,1.75));+#2722 = CARTESIAN_POINT('',(0.835381947013,9.463413675835E-02,1.75));+#2723 = CARTESIAN_POINT('',(0.831311362949,8.809450990157E-02,1.75));+#2724 = PCURVE('',#2438,#2725);+#2725 = DEFINITIONAL_REPRESENTATION('',(#2726),#2735);+#2726 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#2727,#2728,#2729,#2730,#2731,+ #2732,#2733,#2734),.UNSPECIFIED.,.F.,.F.,(5,3,5),(0.,0.534013424926,+ 1.),.UNSPECIFIED.);+#2727 = CARTESIAN_POINT('',(3.249770762312,-0.777979573251));+#2728 = CARTESIAN_POINT('',(3.244319820762,-0.770646577094));+#2729 = CARTESIAN_POINT('',(3.24041145031,-0.763153946404));+#2730 = CARTESIAN_POINT('',(3.238049579671,-0.755502871643));+#2731 = CARTESIAN_POINT('',(3.236523049388,-0.740881636529));+#2732 = CARTESIAN_POINT('',(3.236989431106,-0.733948894335));+#2733 = CARTESIAN_POINT('',(3.238633654852,-0.726897761016));+#2734 = CARTESIAN_POINT('',(3.241453663073,-0.719729502672));+#2735 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2736 = PCURVE('',#2737,#2744);+#2737 = SURFACE_OF_LINEAR_EXTRUSION('',#2738,#2742);+#2738 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#2739,#2740,#2741),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#2739 = CARTESIAN_POINT('',(0.831311362949,8.809450990157E-02,1.8000001)+ );+#2740 = CARTESIAN_POINT('',(0.848787021824,0.116170158586,1.8000001));+#2741 = CARTESIAN_POINT('',(0.883022124046,0.116170158586,1.8000001));+#2742 = VECTOR('',#2743,1.);+#2743 = DIRECTION('',(0.,0.,1.));+#2744 = DEFINITIONAL_REPRESENTATION('',(#2745),#2754);+#2745 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#2746,#2747,#2748,#2749,#2750,+ #2751,#2752,#2753),.UNSPECIFIED.,.F.,.F.,(5,3,5),(0.,0.534013424926,+ 1.),.UNSPECIFIED.);+#2746 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#2747 = CARTESIAN_POINT('',(0.866554432636,-5.00001E-02));+#2748 = CARTESIAN_POINT('',(0.733054616167,-5.00001E-02));+#2749 = CARTESIAN_POINT('',(0.599527437871,-5.00001E-02));+#2750 = CARTESIAN_POINT('',(0.349482342302,-5.00001E-02));+#2751 = CARTESIAN_POINT('',(0.232964473587,-5.00001E-02));+#2752 = CARTESIAN_POINT('',(0.11646439465,-5.00001E-02));+#2753 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#2754 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2755 = ORIENTED_EDGE('',*,*,#2756,.T.);+#2756 = EDGE_CURVE('',#2712,#2757,#2759,.T.);+#2757 = VERTEX_POINT('',#2758);+#2758 = CARTESIAN_POINT('',(0.813835704074,5.156751799116E-03,1.75));+#2759 = SURFACE_CURVE('',#2760,(#2766,#2775),.PCURVE_S1.);+#2760 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#2761,#2762,#2763,#2764,#2765),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#2761 = CARTESIAN_POINT('',(0.831311362949,8.809450990157E-02,1.75));+#2762 = CARTESIAN_POINT('',(0.822559846542,7.40346966565E-02,1.75));+#2763 = CARTESIAN_POINT('',(0.816735288859,5.550477331356E-02,1.75));+#2764 = CARTESIAN_POINT('',(0.813835704074,3.252653669294E-02,1.75));+#2765 = CARTESIAN_POINT('',(0.813835704074,5.156751799116E-03,1.75));+#2766 = PCURVE('',#2438,#2767);+#2767 = DEFINITIONAL_REPRESENTATION('',(#2768),#2774);+#2768 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#2769,#2770,#2771,#2772,#2773),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#2769 = CARTESIAN_POINT('',(3.241453663073,-0.719729502672));+#2770 = CARTESIAN_POINT('',(3.247516514946,-0.704318168691));+#2771 = CARTESIAN_POINT('',(3.25891303647,-0.688589124587));+#2772 = CARTESIAN_POINT('',(3.275624549766,-0.672553780079));+#2773 = CARTESIAN_POINT('',(3.297590351765,-0.656225624406));+#2774 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2775 = PCURVE('',#2776,#2783);+#2776 = SURFACE_OF_LINEAR_EXTRUSION('',#2777,#2781);+#2777 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#2778,#2779,#2780),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#2778 = CARTESIAN_POINT('',(0.813835704074,5.156751799116E-03,1.8000001)+ );+#2779 = CARTESIAN_POINT('',(0.813835704074,6.001886121749E-02,1.8000001)+ );+#2780 = CARTESIAN_POINT('',(0.831311362949,8.809450990157E-02,1.8000001)+ );+#2781 = VECTOR('',#2782,1.);+#2782 = DIRECTION('',(0.,0.,1.));+#2783 = DEFINITIONAL_REPRESENTATION('',(#2784),#2790);+#2784 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#2785,#2786,#2787,#2788,#2789),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#2785 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#2786 = CARTESIAN_POINT('',(0.749608399021,-5.00001E-02));+#2787 = CARTESIAN_POINT('',(0.499365296252,-5.00001E-02));+#2788 = CARTESIAN_POINT('',(0.249441601717,-5.00001E-02));+#2789 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#2790 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2791 = ORIENTED_EDGE('',*,*,#2792,.T.);+#2792 = EDGE_CURVE('',#2757,#2793,#2795,.T.);+#2793 = VERTEX_POINT('',#2794);+#2794 = CARTESIAN_POINT('',(0.831311362949,-7.763776319781E-02,1.75));+#2795 = SURFACE_CURVE('',#2796,(#2802,#2811),.PCURVE_S1.);+#2796 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#2797,#2798,#2799,#2800,#2801),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#2797 = CARTESIAN_POINT('',(0.813835704074,5.156751799116E-03,1.75));+#2798 = CARTESIAN_POINT('',(0.813835704074,-2.214206251037E-02,1.75));+#2799 = CARTESIAN_POINT('',(0.816735393616,-4.507238359248E-02,1.75));+#2800 = CARTESIAN_POINT('',(0.822559960626,-6.357813323637E-02,1.75));+#2801 = CARTESIAN_POINT('',(0.831311362949,-7.763776319781E-02,1.75));+#2802 = PCURVE('',#2438,#2803);+#2803 = DEFINITIONAL_REPRESENTATION('',(#2804),#2810);+#2804 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#2805,#2806,#2807,#2808,#2809),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#2805 = CARTESIAN_POINT('',(3.297590351765,-0.656225624406));+#2806 = CARTESIAN_POINT('',(3.319499195852,-0.639939808078));+#2807 = CARTESIAN_POINT('',(3.339631961859,-0.628587294819));+#2808 = CARTESIAN_POINT('',(3.357958670356,-0.622221754278));+#2809 = CARTESIAN_POINT('',(3.374463195662,-0.6208576129));+#2810 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2811 = PCURVE('',#2812,#2819);+#2812 = SURFACE_OF_LINEAR_EXTRUSION('',#2813,#2817);+#2813 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#2814,#2815,#2816),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#2814 = CARTESIAN_POINT('',(0.831311362949,-7.763776319781E-02,1.8000001+ ));+#2815 = CARTESIAN_POINT('',(0.813835704074,-4.956211451373E-02,1.8000001+ ));+#2816 = CARTESIAN_POINT('',(0.813835704074,5.156751799116E-03,1.8000001)+ );+#2817 = VECTOR('',#2818,1.);+#2818 = DIRECTION('',(0.,0.,1.));+#2819 = DEFINITIONAL_REPRESENTATION('',(#2820),#2826);+#2820 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#2821,#2822,#2823,#2824,#2825),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#2821 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#2822 = CARTESIAN_POINT('',(0.750553911759,-5.00001E-02));+#2823 = CARTESIAN_POINT('',(0.500629515668,-5.00001E-02));+#2824 = CARTESIAN_POINT('',(0.250388336876,-5.00001E-02));+#2825 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#2826 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2827 = ORIENTED_EDGE('',*,*,#2828,.T.);+#2828 = EDGE_CURVE('',#2793,#2829,#2831,.T.);+#2829 = VERTEX_POINT('',#2830);+#2830 = CARTESIAN_POINT('',(0.883022124046,-0.105713411882,1.75));+#2831 = SURFACE_CURVE('',#2832,(#2841,#2853),.PCURVE_S1.);+#2832 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#2833,#2834,#2835,#2836,#2837,+ #2838,#2839,#2840),.UNSPECIFIED.,.F.,.F.,(5,3,5),(0.,0.461987296673,+ 1.),.UNSPECIFIED.);+#2833 = CARTESIAN_POINT('',(0.831311362949,-7.763776319781E-02,1.75));+#2834 = CARTESIAN_POINT('',(0.835347011675,-8.412126443018E-02,1.75));+#2835 = CARTESIAN_POINT('',(0.839979723763,-8.960858004166E-02,1.75));+#2836 = CARTESIAN_POINT('',(0.845209705192,-9.409736488783E-02,1.75));+#2837 = CARTESIAN_POINT('',(0.857821240672,-0.101651076779,1.75));+#2838 = CARTESIAN_POINT('',(0.865415231442,-0.104360132898,1.75));+#2839 = CARTESIAN_POINT('',(0.873816650551,-0.105713411882,1.75));+#2840 = CARTESIAN_POINT('',(0.883022124046,-0.105713411882,1.75));+#2841 = PCURVE('',#2438,#2842);+#2842 = DEFINITIONAL_REPRESENTATION('',(#2843),#2852);+#2843 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#2844,#2845,#2846,#2847,#2848,+ #2849,#2850,#2851),.UNSPECIFIED.,.F.,.F.,(5,3,5),(0.,0.461987296673,+ 1.),.UNSPECIFIED.);+#2844 = CARTESIAN_POINT('',(3.374463195662,-0.6208576129));+#2845 = CARTESIAN_POINT('',(3.382074143493,-0.620228548528));+#2846 = CARTESIAN_POINT('',(3.389241789609,-0.620672961699));+#2847 = CARTESIAN_POINT('',(3.395964374781,-0.622192416783));+#2848 = CARTESIAN_POINT('',(3.409550395123,-0.627807525129));+#2849 = CARTESIAN_POINT('',(3.416254958367,-0.632285974926));+#2850 = CARTESIAN_POINT('',(3.422353126034,-0.638221255725));+#2851 = CARTESIAN_POINT('',(3.427844890213,-0.6456091694));+#2852 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2853 = PCURVE('',#2854,#2861);+#2854 = SURFACE_OF_LINEAR_EXTRUSION('',#2855,#2859);+#2855 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#2856,#2857,#2858),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#2856 = CARTESIAN_POINT('',(0.883022124046,-0.105713411882,1.8000001));+#2857 = CARTESIAN_POINT('',(0.848787021824,-0.105713411882,1.8000001));+#2858 = CARTESIAN_POINT('',(0.831311362949,-7.763776319781E-02,1.8000001+ ));+#2859 = VECTOR('',#2860,1.);+#2860 = DIRECTION('',(0.,0.,1.));+#2861 = DEFINITIONAL_REPRESENTATION('',(#2862),#2871);+#2862 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#2863,#2864,#2865,#2866,#2867,+ #2868,#2869,#2870),.UNSPECIFIED.,.F.,.F.,(5,3,5),(0.,0.461987296673,+ 1.),.UNSPECIFIED.);+#2863 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#2864 = CARTESIAN_POINT('',(0.88453514814,-5.00001E-02));+#2865 = CARTESIAN_POINT('',(0.769035222102,-5.00001E-02));+#2866 = CARTESIAN_POINT('',(0.653517659047,-5.00001E-02));+#2867 = CARTESIAN_POINT('',(0.403472560667,-5.00001E-02));+#2868 = CARTESIAN_POINT('',(0.268944973261,-5.00001E-02));+#2869 = CARTESIAN_POINT('',(0.134444954112,-5.00001E-02));+#2870 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#2871 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2872 = ORIENTED_EDGE('',*,*,#2873,.T.);+#2873 = EDGE_CURVE('',#2829,#2874,#2876,.T.);+#2874 = VERTEX_POINT('',#2875);+#2875 = CARTESIAN_POINT('',(0.934804506695,-7.763776319781E-02,1.75));+#2876 = SURFACE_CURVE('',#2877,(#2886,#2898),.PCURVE_S1.);+#2877 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#2878,#2879,#2880,#2881,#2882,+ #2883,#2884,#2885),.UNSPECIFIED.,.F.,.F.,(5,3,5),(0.,0.534012816541,+ 1.),.UNSPECIFIED.);+#2878 = CARTESIAN_POINT('',(0.883022124046,-0.105713411882,1.75));+#2879 = CARTESIAN_POINT('',(0.892159189018,-0.105713411882,1.75));+#2880 = CARTESIAN_POINT('',(0.900507490739,-0.104380171362,1.75));+#2881 = CARTESIAN_POINT('',(0.908063746522,-0.101711257946,1.75));+#2882 = CARTESIAN_POINT('',(0.920727926062,-9.421371178959E-02,1.75));+#2883 = CARTESIAN_POINT('',(0.926025116892,-8.970350516888E-02,1.75));+#2884 = CARTESIAN_POINT('',(0.930717241524,-8.417738747245E-02,1.75));+#2885 = CARTESIAN_POINT('',(0.934804506695,-7.763776319781E-02,1.75));+#2886 = PCURVE('',#2438,#2887);+#2887 = DEFINITIONAL_REPRESENTATION('',(#2888),#2897);+#2888 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#2889,#2890,#2891,#2892,#2893,+ #2894,#2895,#2896),.UNSPECIFIED.,.F.,.F.,(5,3,5),(0.,0.534012816541,+ 1.),.UNSPECIFIED.);+#2889 = CARTESIAN_POINT('',(3.427844890213,-0.6456091694));+#2890 = CARTESIAN_POINT('',(3.433295843512,-0.652942181362));+#2891 = CARTESIAN_POINT('',(3.437206238615,-0.660437545399));+#2892 = CARTESIAN_POINT('',(3.43957216503,-0.668094078066));+#2893 = CARTESIAN_POINT('',(3.441110104799,-0.682730654956));+#2894 = CARTESIAN_POINT('',(3.440650585326,-0.689672631353));+#2895 = CARTESIAN_POINT('',(3.43901477175,-0.696735075993));+#2896 = CARTESIAN_POINT('',(3.436204717149,-0.70391672033));+#2897 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2898 = PCURVE('',#2899,#2906);+#2899 = SURFACE_OF_LINEAR_EXTRUSION('',#2900,#2904);+#2900 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#2901,#2902,#2903),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#2901 = CARTESIAN_POINT('',(0.934804506695,-7.763776319781E-02,1.8000001+ ));+#2902 = CARTESIAN_POINT('',(0.917257226268,-0.105713411882,1.8000001));+#2903 = CARTESIAN_POINT('',(0.883022124046,-0.105713411882,1.8000001));+#2904 = VECTOR('',#2905,1.);+#2905 = DIRECTION('',(0.,0.,1.));+#2906 = DEFINITIONAL_REPRESENTATION('',(#2907),#2916);+#2907 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#2908,#2909,#2910,#2911,#2912,+ #2913,#2914,#2915),.UNSPECIFIED.,.F.,.F.,(5,3,5),(0.,0.534012816541,+ 1.),.UNSPECIFIED.);+#2908 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#2909 = CARTESIAN_POINT('',(0.866554145031,-5.00001E-02));+#2910 = CARTESIAN_POINT('',(0.73305427256,-5.00001E-02));+#2911 = CARTESIAN_POINT('',(0.599527210523,-5.00001E-02));+#2912 = CARTESIAN_POINT('',(0.34948225582,-5.00001E-02));+#2913 = CARTESIAN_POINT('',(0.232964385271,-5.00001E-02));+#2914 = CARTESIAN_POINT('',(0.116464348665,-5.00001E-02));+#2915 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#2916 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2917 = ORIENTED_EDGE('',*,*,#2918,.T.);+#2918 = EDGE_CURVE('',#2874,#2629,#2919,.T.);+#2919 = SURFACE_CURVE('',#2920,(#2926,#2935),.PCURVE_S1.);+#2920 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#2921,#2922,#2923,#2924,#2925),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#2921 = CARTESIAN_POINT('',(0.934804506695,-7.763776319781E-02,1.75));+#2922 = CARTESIAN_POINT('',(0.943591746125,-6.357818010969E-02,1.75));+#2923 = CARTESIAN_POINT('',(0.949440203994,-4.507245996663E-02,1.75));+#2924 = CARTESIAN_POINT('',(0.952351787123,-2.214210783056E-02,1.75));+#2925 = CARTESIAN_POINT('',(0.952351787123,5.156751799116E-03,1.75));+#2926 = PCURVE('',#2438,#2927);+#2927 = DEFINITIONAL_REPRESENTATION('',(#2928),#2934);+#2928 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#2929,#2930,#2931,#2932,#2933),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#2929 = CARTESIAN_POINT('',(3.436204717149,-0.70391672033));+#2930 = CARTESIAN_POINT('',(3.430163361486,-0.719356586753));+#2931 = CARTESIAN_POINT('',(3.418800522676,-0.735090373063));+#2932 = CARTESIAN_POINT('',(3.402134597315,-0.751106780189));+#2933 = CARTESIAN_POINT('',(3.380225716855,-0.767392623554));+#2934 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2935 = PCURVE('',#2936,#2943);+#2936 = SURFACE_OF_LINEAR_EXTRUSION('',#2937,#2941);+#2937 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#2938,#2939,#2940),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#2938 = CARTESIAN_POINT('',(0.952351787123,5.156751799116E-03,1.8000001)+ );+#2939 = CARTESIAN_POINT('',(0.952351787123,-4.956211451373E-02,1.8000001+ ));+#2940 = CARTESIAN_POINT('',(0.934804506695,-7.763776319781E-02,1.8000001+ ));+#2941 = VECTOR('',#2942,1.);+#2942 = DIRECTION('',(0.,0.,1.));+#2943 = DEFINITIONAL_REPRESENTATION('',(#2944),#2950);+#2944 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#2945,#2946,#2947,#2948,#2949),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#2945 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#2946 = CARTESIAN_POINT('',(0.749612497892,-5.00001E-02));+#2947 = CARTESIAN_POINT('',(0.499371315595,-5.00001E-02));+#2948 = CARTESIAN_POINT('',(0.24944650236,-5.00001E-02));+#2949 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#2950 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2951 = FACE_BOUND('',#2952,.F.);+#2952 = EDGE_LOOP('',(#2953,#2982,#3009,#3045,#3081,#3117,#3162,#3198,+ #3234,#3270,#3306,#3333,#3369,#3405,#3441,#3486,#3522,#3567,#3603,+ #3639,#3666,#3693));+#2953 = ORIENTED_EDGE('',*,*,#2954,.T.);+#2954 = EDGE_CURVE('',#2955,#2957,#2959,.T.);+#2955 = VERTEX_POINT('',#2956);+#2956 = CARTESIAN_POINT('',(0.756108732545,0.112302594736,1.75));+#2957 = VERTEX_POINT('',#2958);+#2958 = CARTESIAN_POINT('',(0.647816944764,0.112302594736,1.75));+#2959 = SURFACE_CURVE('',#2960,(#2964,#2971),.PCURVE_S1.);+#2960 = LINE('',#2961,#2962);+#2961 = CARTESIAN_POINT('',(-0.516134347809,0.112302594736,1.75));+#2962 = VECTOR('',#2963,1.);+#2963 = DIRECTION('',(-1.,-0.,-0.));+#2964 = PCURVE('',#2438,#2965);+#2965 = DEFINITIONAL_REPRESENTATION('',(#2966),#2970);+#2966 = LINE('',#2967,#2968);+#2967 = CARTESIAN_POINT('',(2.4181715872,0.347230008443));+#2968 = VECTOR('',#2969,1.);+#2969 = DIRECTION('',(-0.596575959062,0.802556617983));+#2970 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2971 = PCURVE('',#2972,#2977);+#2972 = PLANE('',#2973);+#2973 = AXIS2_PLACEMENT_3D('',#2974,#2975,#2976);+#2974 = CARTESIAN_POINT('',(0.647816944764,0.112302594736,1.8000001));+#2975 = DIRECTION('',(0.,-1.,0.));+#2976 = DIRECTION('',(1.,0.,0.));+#2977 = DEFINITIONAL_REPRESENTATION('',(#2978),#2981);+#2978 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#2979,#2980),.UNSPECIFIED.,.F.,+ .F.,(2,2),(-1.272243080354,-1.163951292573),.PIECEWISE_BEZIER_KNOTS.);+#2979 = CARTESIAN_POINT('',(0.108291787781,-5.00001E-02));+#2980 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#2981 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2982 = ORIENTED_EDGE('',*,*,#2983,.T.);+#2983 = EDGE_CURVE('',#2957,#2984,#2986,.T.);+#2984 = VERTEX_POINT('',#2985);+#2985 = CARTESIAN_POINT('',(0.647816944764,4.870265588054E-03,1.75));+#2986 = SURFACE_CURVE('',#2987,(#2991,#2998),.PCURVE_S1.);+#2987 = LINE('',#2988,#2989);+#2988 = CARTESIAN_POINT('',(0.647816944764,1.132520773177,1.75));+#2989 = VECTOR('',#2990,1.);+#2990 = DIRECTION('',(0.,-1.,0.));+#2991 = PCURVE('',#2438,#2992);+#2992 = DEFINITIONAL_REPRESENTATION('',(#2993),#2997);+#2993 = LINE('',#2994,#2995);+#2994 = CARTESIAN_POINT('',(2.293774094974,-1.195544442678));+#2995 = VECTOR('',#2996,1.);+#2996 = DIRECTION('',(0.802556617983,0.596575959062));+#2997 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2998 = PCURVE('',#2999,#3004);+#2999 = PLANE('',#3000);+#3000 = AXIS2_PLACEMENT_3D('',#3001,#3002,#3003);+#3001 = CARTESIAN_POINT('',(0.647816944764,4.870265588054E-03,1.8000001)+ );+#3002 = DIRECTION('',(1.,0.,0.));+#3003 = DIRECTION('',(0.,1.,0.));+#3004 = DEFINITIONAL_REPRESENTATION('',(#3005),#3008);+#3005 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#3006,#3007),.UNSPECIFIED.,.F.,+ .F.,(2,2),(1.02021817844,1.127650507588),.PIECEWISE_BEZIER_KNOTS.);+#3006 = CARTESIAN_POINT('',(0.107432329148,-5.00001E-02));+#3007 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#3008 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3009 = ORIENTED_EDGE('',*,*,#3010,.T.);+#3010 = EDGE_CURVE('',#2984,#3011,#3013,.T.);+#3011 = VERTEX_POINT('',#3012);+#3012 = CARTESIAN_POINT('',(0.668873681277,1.282025794503E-02,1.75));+#3013 = SURFACE_CURVE('',#3014,(#3020,#3029),.PCURVE_S1.);+#3014 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#3015,#3016,#3017,#3018,#3019),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#3015 = CARTESIAN_POINT('',(0.647816944764,4.870265588054E-03,1.75));+#3016 = CARTESIAN_POINT('',(0.65283044028,7.520256074991E-03,1.75));+#3017 = CARTESIAN_POINT('',(0.658011078538,9.728596735646E-03,1.75));+#3018 = CARTESIAN_POINT('',(0.663358836719,1.149526282386E-02,1.75));+#3019 = CARTESIAN_POINT('',(0.668873681277,1.282025794502E-02,1.75));+#3020 = PCURVE('',#2438,#3021);+#3021 = DEFINITIONAL_REPRESENTATION('',(#3022),#3028);+#3022 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#3023,#3024,#3025,#3026,#3027),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#3023 = CARTESIAN_POINT('',(3.198777472612,-0.522815259626));+#3024 = CARTESIAN_POINT('',(3.199641636105,-0.528419794248));+#3025 = CARTESIAN_POINT('',(3.20095996193,-0.533894992715));+#3026 = CARTESIAN_POINT('',(3.202732456335,-0.53924082195));+#3027 = CARTESIAN_POINT('',(3.204959096413,-0.544457257183));+#3028 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3029 = PCURVE('',#3030,#3037);+#3030 = SURFACE_OF_LINEAR_EXTRUSION('',#3031,#3035);+#3031 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#3032,#3033,#3034),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#3032 = CARTESIAN_POINT('',(0.668873681277,1.282025794503E-02,1.8000001)+ );+#3033 = CARTESIAN_POINT('',(0.657843962151,1.01702604927E-02,1.8000001)+ );+#3034 = CARTESIAN_POINT('',(0.647816944764,4.870265588054E-03,1.8000001)+ );+#3035 = VECTOR('',#3036,1.);+#3036 = DIRECTION('',(0.,0.,1.));+#3037 = DEFINITIONAL_REPRESENTATION('',(#3038),#3044);+#3038 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#3039,#3040,#3041,#3042,#3043),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#3039 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#3040 = CARTESIAN_POINT('',(0.750000657113,-5.00001E-02));+#3041 = CARTESIAN_POINT('',(0.499999984599,-5.00001E-02));+#3042 = CARTESIAN_POINT('',(0.249999319811,-5.00001E-02));+#3043 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#3044 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3045 = ORIENTED_EDGE('',*,*,#3046,.T.);+#3046 = EDGE_CURVE('',#3011,#3047,#3049,.T.);+#3047 = VERTEX_POINT('',#3048);+#3048 = CARTESIAN_POINT('',(0.691506091951,1.547025539735E-02,1.75));+#3049 = SURFACE_CURVE('',#3050,(#3056,#3065),.PCURVE_S1.);+#3050 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#3051,#3052,#3053,#3054,#3055),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#3051 = CARTESIAN_POINT('',(0.668873681277,1.282025794502E-02,1.75));+#3052 = CARTESIAN_POINT('',(0.674388560105,1.414526129969E-02,1.75));+#3053 = CARTESIAN_POINT('',(0.679998940168,1.502859656743E-02,1.75));+#3054 = CARTESIAN_POINT('',(0.685704794856,1.547025539735E-02,1.75));+#3055 = CARTESIAN_POINT('',(0.691506091951,1.547025539735E-02,1.75));+#3056 = PCURVE('',#2438,#3057);+#3057 = DEFINITIONAL_REPRESENTATION('',(#3058),#3064);+#3058 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#3059,#3060,#3061,#3062,#3063),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#3059 = CARTESIAN_POINT('',(3.204959096413,-0.544457257183));+#3060 = CARTESIAN_POINT('',(3.207185750327,-0.54967372483));+#3061 = CARTESIAN_POINT('',(3.209823841629,-0.554703349064));+#3062 = CARTESIAN_POINT('',(3.212873361146,-0.559546103546));+#3063 = CARTESIAN_POINT('',(3.216334275524,-0.564201972922));+#3064 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3065 = PCURVE('',#3066,#3073);+#3066 = SURFACE_OF_LINEAR_EXTRUSION('',#3067,#3071);+#3067 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#3068,#3069,#3070),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#3068 = CARTESIAN_POINT('',(0.691506091951,1.547025539735E-02,1.8000001)+ );+#3069 = CARTESIAN_POINT('',(0.679903400403,1.547025539735E-02,1.8000001)+ );+#3070 = CARTESIAN_POINT('',(0.668873681277,1.282025794503E-02,1.8000001)+ );+#3071 = VECTOR('',#3072,1.);+#3072 = DIRECTION('',(0.,0.,1.));+#3073 = DEFINITIONAL_REPRESENTATION('',(#3074),#3080);+#3074 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#3075,#3076,#3077,#3078,#3079),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#3075 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#3076 = CARTESIAN_POINT('',(0.749999126696,-5.00001E-02));+#3077 = CARTESIAN_POINT('',(0.499998019266,-5.00001E-02));+#3078 = CARTESIAN_POINT('',(0.249997902233,-5.00001E-02));+#3079 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#3080 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3081 = ORIENTED_EDGE('',*,*,#3082,.T.);+#3082 = EDGE_CURVE('',#3047,#3083,#3085,.T.);+#3083 = VERTEX_POINT('',#3084);+#3084 = CARTESIAN_POINT('',(0.728820920942,2.721619005089E-03,1.75));+#3085 = SURFACE_CURVE('',#3086,(#3092,#3101),.PCURVE_S1.);+#3086 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#3087,#3088,#3089,#3090,#3091),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#3087 = CARTESIAN_POINT('',(0.691506091951,1.547025539735E-02,1.75));+#3088 = CARTESIAN_POINT('',(0.703463054258,1.547025539735E-02,1.75));+#3089 = CARTESIAN_POINT('',(0.713670420274,1.334684637676E-02,1.75));+#3090 = CARTESIAN_POINT('',(0.722123374985,9.096823177883E-03,1.75));+#3091 = CARTESIAN_POINT('',(0.728820920942,2.721619005089E-03,1.75));+#3092 = PCURVE('',#2438,#3093);+#3093 = DEFINITIONAL_REPRESENTATION('',(#3094),#3100);+#3094 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#3095,#3096,#3097,#3098,#3099),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#3095 = CARTESIAN_POINT('',(3.216334275524,-0.564201972922));+#3096 = CARTESIAN_POINT('',(3.223467511779,-0.573798112152));+#3097 = CARTESIAN_POINT('',(3.231261136912,-0.580723326528));+#3098 = CARTESIAN_POINT('',(3.23971485072,-0.584971839606));+#3099 = CARTESIAN_POINT('',(3.248826907923,-0.586543705895));+#3100 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3101 = PCURVE('',#3102,#3109);+#3102 = SURFACE_OF_LINEAR_EXTRUSION('',#3103,#3107);+#3103 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#3104,#3105,#3106),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#3104 = CARTESIAN_POINT('',(0.728820920942,2.721619005089E-03,1.8000001)+ );+#3105 = CARTESIAN_POINT('',(0.715427690575,1.547025539735E-02,1.8000001)+ );+#3106 = CARTESIAN_POINT('',(0.691506091951,1.547025539735E-02,1.8000001)+ );+#3107 = VECTOR('',#3108,1.);+#3108 = DIRECTION('',(0.,0.,1.));+#3109 = DEFINITIONAL_REPRESENTATION('',(#3110),#3116);+#3110 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#3111,#3112,#3113,#3114,#3115),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#3111 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#3112 = CARTESIAN_POINT('',(0.750080199595,-5.00001E-02));+#3113 = CARTESIAN_POINT('',(0.500076676919,-5.00001E-02));+#3114 = CARTESIAN_POINT('',(0.250034747899,-5.00001E-02));+#3115 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#3116 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3117 = ORIENTED_EDGE('',*,*,#3118,.T.);+#3118 = EDGE_CURVE('',#3083,#3119,#3121,.T.);+#3119 = VERTEX_POINT('',#3120);+#3120 = CARTESIAN_POINT('',(0.742214151309,-3.294591427213E-02,1.75));+#3121 = SURFACE_CURVE('',#3122,(#3131,#3143),.PCURVE_S1.);+#3122 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#3123,#3124,#3125,#3126,#3127,+ #3128,#3129,#3130),.UNSPECIFIED.,.F.,.F.,(5,3,5),(0.,0.175982294587,+ 1.),.UNSPECIFIED.);+#3123 = CARTESIAN_POINT('',(0.728820920942,2.721619005089E-03,1.75));+#3124 = CARTESIAN_POINT('',(0.729999511488,1.599752067893E-03,1.75));+#3125 = CARTESIAN_POINT('',(0.731108972594,4.253676168204E-04,1.75));+#3126 = CARTESIAN_POINT('',(0.732149293761,-8.015305589599E-04,1.75));+#3127 = CARTESIAN_POINT('',(0.737667891917,-8.071605301692E-03,1.75));+#3128 = CARTESIAN_POINT('',(0.740699312691,-1.521346390347E-02,1.75));+#3129 = CARTESIAN_POINT('',(0.742214151309,-2.350574252386E-02,1.75));+#3130 = CARTESIAN_POINT('',(0.742214151309,-3.294591427213E-02,1.75));+#3131 = PCURVE('',#2438,#3132);+#3132 = DEFINITIONAL_REPRESENTATION('',(#3133),#3142);+#3133 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#3134,#3135,#3136,#3137,#3138,+ #3139,#3140,#3141),.UNSPECIFIED.,.F.,.F.,(5,3,5),(0.,0.175982294587,+ 1.),.UNSPECIFIED.);+#3134 = CARTESIAN_POINT('',(3.248826907923,-0.586543705895));+#3135 = CARTESIAN_POINT('',(3.250430388443,-0.586820312694));+#3136 = CARTESIAN_POINT('',(3.25203477628,-0.587010108516));+#3137 = CARTESIAN_POINT('',(3.253640062128,-0.587113087198));+#3138 = CARTESIAN_POINT('',(3.262766971714,-0.587204922858));+#3139 = CARTESIAN_POINT('',(3.270307190355,-0.585377148517));+#3140 = CARTESIAN_POINT('',(3.277865929741,-0.581645918204));+#3141 = CARTESIAN_POINT('',(3.285442202053,-0.57601413869));+#3142 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3143 = PCURVE('',#3144,#3151);+#3144 = SURFACE_OF_LINEAR_EXTRUSION('',#3145,#3149);+#3145 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#3146,#3147,#3148),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#3146 = CARTESIAN_POINT('',(0.742214151309,-3.294591427213E-02,1.8000001+ ));+#3147 = CARTESIAN_POINT('',(0.742214151309,-1.002701738717E-02,1.8000001+ ));+#3148 = CARTESIAN_POINT('',(0.728820920942,2.721619005089E-03,1.8000001)+ );+#3149 = VECTOR('',#3150,1.);+#3150 = DIRECTION('',(0.,0.,1.));+#3151 = DEFINITIONAL_REPRESENTATION('',(#3152),#3161);+#3152 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#3153,#3154,#3155,#3156,#3157,+ #3158,#3159,#3160),.UNSPECIFIED.,.F.,.F.,(5,3,5),(0.,0.175982294587,+ 1.),.UNSPECIFIED.);+#3153 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#3154 = CARTESIAN_POINT('',(0.95600051242,-5.00001E-02));+#3155 = CARTESIAN_POINT('',(0.912000512158,-5.00001E-02));+#3156 = CARTESIAN_POINT('',(0.868000255802,-5.00001E-02));+#3157 = CARTESIAN_POINT('',(0.617973649969,-5.00001E-02));+#3158 = CARTESIAN_POINT('',(0.411947305402,-5.00001E-02));+#3159 = CARTESIAN_POINT('',(0.205947341088,-5.00001E-02));+#3160 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#3161 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3162 = ORIENTED_EDGE('',*,*,#3163,.T.);+#3163 = EDGE_CURVE('',#3119,#3164,#3166,.T.);+#3164 = VERTEX_POINT('',#3165);+#3165 = CARTESIAN_POINT('',(0.729250650258,-6.875669065488E-02,1.75));+#3166 = SURFACE_CURVE('',#3167,(#3173,#3182),.PCURVE_S1.);+#3167 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#3168,#3169,#3170,#3171,#3172),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#3168 = CARTESIAN_POINT('',(0.742214151309,-3.294591427213E-02,1.75));+#3169 = CARTESIAN_POINT('',(0.742214151309,-4.454507370587E-02,1.75));+#3170 = CARTESIAN_POINT('',(0.740054883715,-5.438243977705E-02,1.75));+#3171 = CARTESIAN_POINT('',(0.735733164917,-6.245325098712E-02,1.75));+#3172 = CARTESIAN_POINT('',(0.729250650258,-6.875669065488E-02,1.75));+#3173 = PCURVE('',#2438,#3174);+#3174 = DEFINITIONAL_REPRESENTATION('',(#3175),#3181);+#3175 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#3176,#3177,#3178,#3179,#3180),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#3176 = CARTESIAN_POINT('',(3.285442202053,-0.57601413869));+#3177 = CARTESIAN_POINT('',(3.294751184219,-0.569094359026));+#3178 = CARTESIAN_POINT('',(3.301358060328,-0.56149268843));+#3179 = CARTESIAN_POINT('',(3.30525710974,-0.55320941247));+#3180 = CARTESIAN_POINT('',(3.306448664562,-0.544246346864));+#3181 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3182 = PCURVE('',#3183,#3190);+#3183 = SURFACE_OF_LINEAR_EXTRUSION('',#3184,#3188);+#3184 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#3185,#3186,#3187),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#3185 = CARTESIAN_POINT('',(0.729250650258,-6.875669065488E-02,1.8000001+ ));+#3186 = CARTESIAN_POINT('',(0.742214151309,-5.615129736815E-02,1.8000001+ ));+#3187 = CARTESIAN_POINT('',(0.742214151309,-3.294591427213E-02,1.8000001+ ));+#3188 = VECTOR('',#3189,1.);+#3189 = DIRECTION('',(0.,0.,1.));+#3190 = DEFINITIONAL_REPRESENTATION('',(#3191),#3197);+#3191 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#3192,#3193,#3194,#3195,#3196),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#3192 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#3193 = CARTESIAN_POINT('',(0.750076105494,-5.00001E-02));+#3194 = CARTESIAN_POINT('',(0.500070428037,-5.00001E-02));+#3195 = CARTESIAN_POINT('',(0.25002947248,-5.00001E-02));+#3196 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#3197 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3198 = ORIENTED_EDGE('',*,*,#3199,.T.);+#3199 = EDGE_CURVE('',#3164,#3200,#3202,.T.);+#3200 = VERTEX_POINT('',#3201);+#3201 = CARTESIAN_POINT('',(0.692365550584,-8.136208394161E-02,1.75));+#3202 = SURFACE_CURVE('',#3203,(#3209,#3218),.PCURVE_S1.);+#3203 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#3204,#3205,#3206,#3207,#3208),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#3204 = CARTESIAN_POINT('',(0.729250650258,-6.875669065488E-02,1.75));+#3205 = CARTESIAN_POINT('',(0.722767914052,-7.506034575028E-02,1.75));+#3206 = CARTESIAN_POINT('',(0.714458126309,-7.926260404885E-02,1.75));+#3207 = CARTESIAN_POINT('',(0.704322312021,-8.136208394161E-02,1.75));+#3208 = CARTESIAN_POINT('',(0.692365550584,-8.136208394161E-02,1.75));+#3209 = PCURVE('',#2438,#3210);+#3210 = DEFINITIONAL_REPRESENTATION('',(#3211),#3217);+#3211 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#3212,#3213,#3214,#3215,#3216),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#3212 = CARTESIAN_POINT('',(3.306448664562,-0.544246346864));+#3213 = CARTESIAN_POINT('',(3.307640260107,-0.535282974935));+#3214 = CARTESIAN_POINT('',(3.306055390722,-0.526106933513));+#3215 = CARTESIAN_POINT('',(3.301693559075,-0.516719869447));+#3216 = CARTESIAN_POINT('',(3.294560442653,-0.507123891426));+#3217 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3218 = PCURVE('',#3219,#3226);+#3219 = SURFACE_OF_LINEAR_EXTRUSION('',#3220,#3224);+#3220 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#3221,#3222,#3223),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#3221 = CARTESIAN_POINT('',(0.692365550584,-8.136208394161E-02,1.8000001+ ));+#3222 = CARTESIAN_POINT('',(0.716287149208,-8.136208394161E-02,1.8000001+ ));+#3223 = CARTESIAN_POINT('',(0.729250650258,-6.875669065488E-02,1.8000001+ ));+#3224 = VECTOR('',#3225,1.);+#3225 = DIRECTION('',(0.,0.,1.));+#3226 = DEFINITIONAL_REPRESENTATION('',(#3227),#3233);+#3227 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#3228,#3229,#3230,#3231,#3232),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#3228 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#3229 = CARTESIAN_POINT('',(0.749961982462,-5.00001E-02));+#3230 = CARTESIAN_POINT('',(0.499918340423,-5.00001E-02));+#3231 = CARTESIAN_POINT('',(0.249915601901,-5.00001E-02));+#3232 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#3233 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3234 = ORIENTED_EDGE('',*,*,#3235,.T.);+#3235 = EDGE_CURVE('',#3200,#3236,#3238,.T.);+#3236 = VERTEX_POINT('',#3237);+#3237 = CARTESIAN_POINT('',(0.665149360533,-7.78526278561E-02,1.75));+#3238 = SURFACE_CURVE('',#3239,(#3245,#3254),.PCURVE_S1.);+#3239 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#3240,#3241,#3242,#3243,#3244),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#3240 = CARTESIAN_POINT('',(0.692365550584,-8.136208394161E-02,1.75));+#3241 = CARTESIAN_POINT('',(0.68541831198,-8.136208394161E-02,1.75));+#3242 = CARTESIAN_POINT('',(0.678566493661,-8.077718335249E-02,1.75));+#3243 = CARTESIAN_POINT('',(0.671810158703,-7.960735425573E-02,1.75));+#3244 = CARTESIAN_POINT('',(0.665149360533,-7.78526278561E-02,1.75));+#3245 = PCURVE('',#2438,#3246);+#3246 = DEFINITIONAL_REPRESENTATION('',(#3247),#3253);+#3247 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#3248,#3249,#3250,#3251,#3252),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#3248 = CARTESIAN_POINT('',(3.294560442653,-0.507123891426));+#3249 = CARTESIAN_POINT('',(3.29041588712,-0.501548339108));+#3250 = CARTESIAN_POINT('',(3.285858841197,-0.496398304601));+#3251 = CARTESIAN_POINT('',(3.280889320106,-0.491673855182));+#3252 = CARTESIAN_POINT('',(3.275507380765,-0.487375015115));+#3253 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3254 = PCURVE('',#3255,#3262);+#3255 = SURFACE_OF_LINEAR_EXTRUSION('',#3256,#3260);+#3256 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#3257,#3258,#3259),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#3257 = CARTESIAN_POINT('',(0.665149360533,-7.78526278561E-02,1.8000001)+ );+#3258 = CARTESIAN_POINT('',(0.678470969348,-8.136208394161E-02,1.8000001+ ));+#3259 = CARTESIAN_POINT('',(0.692365550584,-8.136208394161E-02,1.8000001+ ));+#3260 = VECTOR('',#3261,1.);+#3261 = DIRECTION('',(0.,0.,1.));+#3262 = DEFINITIONAL_REPRESENTATION('',(#3263),#3269);+#3263 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#3264,#3265,#3266,#3267,#3268),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#3264 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#3265 = CARTESIAN_POINT('',(0.750001871742,-5.00001E-02));+#3266 = CARTESIAN_POINT('',(0.500001091783,-5.00001E-02));+#3267 = CARTESIAN_POINT('',(0.2499997659,-5.00001E-02));+#3268 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#3269 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3270 = ORIENTED_EDGE('',*,*,#3271,.T.);+#3271 = EDGE_CURVE('',#3236,#3272,#3274,.T.);+#3272 = VERTEX_POINT('',#3273);+#3273 = CARTESIAN_POINT('',(0.63864938601,-6.718101649404E-02,1.75));+#3274 = SURFACE_CURVE('',#3275,(#3281,#3290),.PCURVE_S1.);+#3275 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#3276,#3277,#3278,#3279,#3280),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#3276 = CARTESIAN_POINT('',(0.665149360533,-7.78526278561E-02,1.75));+#3277 = CARTESIAN_POINT('',(0.658488351599,-7.609784593267E-02,1.75));+#3278 = CARTESIAN_POINT('',(0.651851314814,-7.373426893138E-02,1.75));+#3279 = CARTESIAN_POINT('',(0.645238307907,-7.07619523077E-02,1.75));+#3280 = CARTESIAN_POINT('',(0.63864938601,-6.718101649404E-02,1.75));+#3281 = PCURVE('',#2438,#3282);+#3282 = DEFINITIONAL_REPRESENTATION('',(#3283),#3289);+#3283 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#3284,#3285,#3286,#3287,#3288),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#3284 = CARTESIAN_POINT('',(3.275507380765,-0.487375015115));+#3285 = CARTESIAN_POINT('',(3.270125271126,-0.483076039021));+#3286 = CARTESIAN_POINT('',(3.264268870176,-0.479159494441));+#3287 = CARTESIAN_POINT('',(3.257938256861,-0.475625394624));+#3288 = CARTESIAN_POINT('',(3.251133560725,-0.472473711968));+#3289 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3290 = PCURVE('',#3291,#3298);+#3291 = SURFACE_OF_LINEAR_EXTRUSION('',#3292,#3296);+#3292 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#3293,#3294,#3295),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#3293 = CARTESIAN_POINT('',(0.63864938601,-6.718101649404E-02,1.8000001)+ );+#3294 = CARTESIAN_POINT('',(0.651827751719,-7.434317177059E-02,1.8000001+ ));+#3295 = CARTESIAN_POINT('',(0.665149360533,-7.78526278561E-02,1.8000001)+ );+#3296 = VECTOR('',#3297,1.);+#3297 = DIRECTION('',(0.,0.,1.));+#3298 = DEFINITIONAL_REPRESENTATION('',(#3299),#3305);+#3299 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#3300,#3301,#3302,#3303,#3304),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#3300 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#3301 = CARTESIAN_POINT('',(0.749992323501,-5.00001E-02));+#3302 = CARTESIAN_POINT('',(0.499988281353,-5.00001E-02));+#3303 = CARTESIAN_POINT('',(0.249990099026,-5.00001E-02));+#3304 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#3305 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3306 = ORIENTED_EDGE('',*,*,#3307,.T.);+#3307 = EDGE_CURVE('',#3272,#3308,#3310,.T.);+#3308 = VERTEX_POINT('',#3309);+#3309 = CARTESIAN_POINT('',(0.63864938601,-9.65458531279E-02,1.75));+#3310 = SURFACE_CURVE('',#3311,(#3315,#3322),.PCURVE_S1.);+#3311 = LINE('',#3312,#3313);+#3312 = CARTESIAN_POINT('',(0.63864938601,1.081812713819,1.75));+#3313 = VECTOR('',#3314,1.);+#3314 = DIRECTION('',(0.,-1.,0.));+#3315 = PCURVE('',#2438,#3316);+#3316 = DEFINITIONAL_REPRESENTATION('',(#3317),#3321);+#3317 = LINE('',#3318,#3319);+#3318 = CARTESIAN_POINT('',(2.329001038441,-1.157935748585));+#3319 = VECTOR('',#3320,1.);+#3320 = DIRECTION('',(0.802556617983,0.596575959062));+#3321 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3322 = PCURVE('',#3323,#3328);+#3323 = PLANE('',#3324);+#3324 = AXIS2_PLACEMENT_3D('',#3325,#3326,#3327);+#3325 = CARTESIAN_POINT('',(0.63864938601,-9.65458531279E-02,1.8000001)+ );+#3326 = DIRECTION('',(1.,0.,0.));+#3327 = DIRECTION('',(0.,1.,0.));+#3328 = DEFINITIONAL_REPRESENTATION('',(#3329),#3332);+#3329 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#3330,#3331),.UNSPECIFIED.,.F.,+ .F.,(2,2),(1.148993730313,1.178358566946),.PIECEWISE_BEZIER_KNOTS.);+#3330 = CARTESIAN_POINT('',(2.936483663386E-02,-5.00001E-02));+#3331 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#3332 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3333 = ORIENTED_EDGE('',*,*,#3334,.T.);+#3334 = EDGE_CURVE('',#3308,#3335,#3337,.T.);+#3335 = VERTEX_POINT('',#3336);+#3336 = CARTESIAN_POINT('',(0.663931794136,-0.103421522193,1.75));+#3337 = SURFACE_CURVE('',#3338,(#3344,#3353),.PCURVE_S1.);+#3338 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#3339,#3340,#3341,#3342,#3343),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#3339 = CARTESIAN_POINT('',(0.63864938601,-9.65458531279E-02,1.75));+#3340 = CARTESIAN_POINT('',(0.644236167815,-9.883786617605E-02,1.75));+#3341 = CARTESIAN_POINT('',(0.650312250199,-0.100747788363,1.75));+#3342 = CARTESIAN_POINT('',(0.656877516055,-0.102275649612,1.75));+#3343 = CARTESIAN_POINT('',(0.663931794136,-0.103421522193,1.75));+#3344 = PCURVE('',#2438,#3345);+#3345 = DEFINITIONAL_REPRESENTATION('',(#3346),#3352);+#3346 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#3347,#3348,#3349,#3350,#3351),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#3347 = CARTESIAN_POINT('',(3.274700504702,-0.45495535639));+#3348 = CARTESIAN_POINT('',(3.279872914655,-0.458071705218));+#3349 = CARTESIAN_POINT('',(3.285030580022,-0.461808691687));+#3350 = CARTESIAN_POINT('',(3.290173454953,-0.466166203959));+#3351 = CARTESIAN_POINT('',(3.295301495289,-0.471144061483));+#3352 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3353 = PCURVE('',#3354,#3361);+#3354 = SURFACE_OF_LINEAR_EXTRUSION('',#3355,#3359);+#3355 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#3356,#3357,#3358),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#3356 = CARTESIAN_POINT('',(0.663931794136,-0.103421522193,1.8000001));+#3357 = CARTESIAN_POINT('',(0.649822348241,-0.101129632505,1.8000001));+#3358 = CARTESIAN_POINT('',(0.63864938601,-9.65458531279E-02,1.8000001)+ );+#3359 = VECTOR('',#3360,1.);+#3360 = DIRECTION('',(0.,0.,1.));+#3361 = DEFINITIONAL_REPRESENTATION('',(#3362),#3368);+#3362 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#3363,#3364,#3365,#3366,#3367),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#3363 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#3364 = CARTESIAN_POINT('',(0.749986543892,-5.00001E-02));+#3365 = CARTESIAN_POINT('',(0.499980518783,-5.00001E-02));+#3366 = CARTESIAN_POINT('',(0.249984235148,-5.00001E-02));+#3367 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#3368 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3369 = ORIENTED_EDGE('',*,*,#3370,.T.);+#3370 = EDGE_CURVE('',#3335,#3371,#3373,.T.);+#3371 = VERTEX_POINT('',#3372);+#3372 = CARTESIAN_POINT('',(0.695087169589,-0.105713411882,1.75));+#3373 = SURFACE_CURVE('',#3374,(#3380,#3389),.PCURVE_S1.);+#3374 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#3375,#3376,#3377,#3378,#3379),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#3375 = CARTESIAN_POINT('',(0.663931794136,-0.103421522193,1.75));+#3376 = CARTESIAN_POINT('',(0.670987092312,-0.104567560476,1.75));+#3377 = CARTESIAN_POINT('',(0.678531544158,-0.105331499603,1.75));+#3378 = CARTESIAN_POINT('',(0.686564978351,-0.105713411882,1.75));+#3379 = CARTESIAN_POINT('',(0.695087169589,-0.105713411882,1.75));+#3380 = PCURVE('',#2438,#3381);+#3381 = DEFINITIONAL_REPRESENTATION('',(#3382),#3388);+#3382 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#3383,#3384,#3385,#3386,#3387),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#3383 = CARTESIAN_POINT('',(3.295301495289,-0.471144061483));+#3384 = CARTESIAN_POINT('',(3.300430277172,-0.476122638839));+#3385 = CARTESIAN_POINT('',(3.305544220171,-0.48172174088));+#3386 = CARTESIAN_POINT('',(3.310643280106,-0.487941186972));+#3387 = CARTESIAN_POINT('',(3.315727414517,-0.49478072795));+#3388 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3389 = PCURVE('',#3390,#3397);+#3390 = SURFACE_OF_LINEAR_EXTRUSION('',#3391,#3395);+#3391 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#3392,#3393,#3394),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#3392 = CARTESIAN_POINT('',(0.695087169589,-0.105713411882,1.8000001));+#3393 = CARTESIAN_POINT('',(0.678041240031,-0.105713411882,1.8000001));+#3394 = CARTESIAN_POINT('',(0.663931794136,-0.103421522193,1.8000001));+#3395 = VECTOR('',#3396,1.);+#3396 = DIRECTION('',(0.,0.,1.));+#3397 = DEFINITIONAL_REPRESENTATION('',(#3398),#3404);+#3398 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#3399,#3400,#3401,#3402,#3403),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#3399 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#3400 = CARTESIAN_POINT('',(0.749979615492,-5.00001E-02));+#3401 = CARTESIAN_POINT('',(0.499971282865,-5.00001E-02));+#3402 = CARTESIAN_POINT('',(0.249977310087,-5.00001E-02));+#3403 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#3404 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3405 = ORIENTED_EDGE('',*,*,#3406,.T.);+#3406 = EDGE_CURVE('',#3371,#3407,#3409,.T.);+#3407 = VERTEX_POINT('',#3408);+#3408 = CARTESIAN_POINT('',(0.750880359194,-8.623234952967E-02,1.75));+#3409 = SURFACE_CURVE('',#3410,(#3416,#3425),.PCURVE_S1.);+#3410 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#3411,#3412,#3413,#3414,#3415),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#3411 = CARTESIAN_POINT('',(0.695087169589,-0.105713411882,1.75));+#3412 = CARTESIAN_POINT('',(0.712766125676,-0.105713411882,1.75));+#3413 = CARTESIAN_POINT('',(0.727965948849,-0.102470817421,1.75));+#3414 = CARTESIAN_POINT('',(0.74067170039,-9.597535021223E-02,1.75));+#3415 = CARTESIAN_POINT('',(0.750880359194,-8.623234952967E-02,1.75));+#3416 = PCURVE('',#2438,#3417);+#3417 = DEFINITIONAL_REPRESENTATION('',(#3418),#3424);+#3418 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#3419,#3420,#3421,#3422,#3423),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#3419 = CARTESIAN_POINT('',(3.315727414517,-0.49478072795));+#3420 = CARTESIAN_POINT('',(3.326274254699,-0.508969091156));+#3421 = CARTESIAN_POINT('',(3.332739738142,-0.523102263737));+#3422 = CARTESIAN_POINT('',(3.335106703858,-0.537174388302));+#3423 = CARTESIAN_POINT('',(3.333377634598,-0.551179854962));+#3424 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3425 = PCURVE('',#3426,#3433);+#3426 = SURFACE_OF_LINEAR_EXTRUSION('',#3427,#3431);+#3427 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#3428,#3429,#3430),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#3428 = CARTESIAN_POINT('',(0.750880359194,-8.623234952967E-02,1.8000001+ ));+#3429 = CARTESIAN_POINT('',(0.730468216655,-0.105713411882,1.8000001));+#3430 = CARTESIAN_POINT('',(0.695087169589,-0.105713411882,1.8000001));+#3431 = VECTOR('',#3432,1.);+#3432 = DIRECTION('',(0.,0.,1.));+#3433 = DEFINITIONAL_REPRESENTATION('',(#3434),#3440);+#3434 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#3435,#3436,#3437,#3438,#3439),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#3435 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#3436 = CARTESIAN_POINT('',(0.750163469534,-5.00001E-02));+#3437 = CARTESIAN_POINT('',(0.500151429162,-5.00001E-02));+#3438 = CARTESIAN_POINT('',(0.250063382233,-5.00001E-02));+#3439 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#3440 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3441 = ORIENTED_EDGE('',*,*,#3442,.T.);+#3442 = EDGE_CURVE('',#3407,#3443,#3445,.T.);+#3443 = VERTEX_POINT('',#3444);+#3444 = CARTESIAN_POINT('',(0.771292501732,-3.294591427213E-02,1.75));+#3445 = SURFACE_CURVE('',#3446,(#3455,#3467),.PCURVE_S1.);+#3446 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#3447,#3448,#3449,#3450,#3451,+ #3452,#3453,#3454),.UNSPECIFIED.,.F.,.F.,(5,3,5),(0.,0.221960178695,+ 1.),.UNSPECIFIED.);+#3447 = CARTESIAN_POINT('',(0.750880359194,-8.623234952967E-02,1.75));+#3448 = CARTESIAN_POINT('',(0.75314601517,-8.407003926448E-02,1.75));+#3449 = CARTESIAN_POINT('',(0.755244111387,-8.178999086139E-02,1.75));+#3450 = CARTESIAN_POINT('',(0.757174571086,-7.939222684317E-02,1.75));+#3451 = CARTESIAN_POINT('',(0.765116479279,-6.805943582643E-02,1.75));+#3452 = CARTESIAN_POINT('',(0.76923537313,-5.779630434877E-02,1.75));+#3453 = CARTESIAN_POINT('',(0.771292501732,-4.608962349474E-02,1.75));+#3454 = CARTESIAN_POINT('',(0.771292501732,-3.294591427213E-02,1.75));+#3455 = PCURVE('',#2438,#3456);+#3456 = DEFINITIONAL_REPRESENTATION('',(#3457),#3466);+#3457 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#3458,#3459,#3460,#3461,#3462,+ #3463,#3464,#3465),.UNSPECIFIED.,.F.,.F.,(5,3,5),(0.,0.221960178695,+ 1.),.UNSPECIFIED.);+#3458 = CARTESIAN_POINT('',(3.333377634598,-0.551179854962));+#3459 = CARTESIAN_POINT('',(3.332993894071,-0.55428815448));+#3460 = CARTESIAN_POINT('',(3.332415699899,-0.557332217547));+#3461 = CARTESIAN_POINT('',(3.331643024364,-0.560311969123));+#3462 = CARTESIAN_POINT('',(3.32728576943,-0.573446670772));+#3463 = CARTESIAN_POINT('',(3.321506258391,-0.582875053795));+#3464 = CARTESIAN_POINT('',(3.313338217666,-0.591509940327));+#3465 = CARTESIAN_POINT('',(3.302789646844,-0.599351161262));+#3466 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3467 = PCURVE('',#3468,#3475);+#3468 = SURFACE_OF_LINEAR_EXTRUSION('',#3469,#3473);+#3469 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#3470,#3471,#3472),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#3470 = CARTESIAN_POINT('',(0.771292501732,-3.294591427213E-02,1.8000001+ ));+#3471 = CARTESIAN_POINT('',(0.771292501732,-6.675128717745E-02,1.8000001+ ));+#3472 = CARTESIAN_POINT('',(0.750880359194,-8.623234952967E-02,1.8000001+ ));+#3473 = VECTOR('',#3474,1.);+#3474 = DIRECTION('',(0.,0.,1.));+#3475 = DEFINITIONAL_REPRESENTATION('',(#3476),#3485);+#3476 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#3477,#3478,#3479,#3480,#3481,+ #3482,#3483,#3484),.UNSPECIFIED.,.F.,.F.,(5,3,5),(0.,0.221960178695,+ 1.),.UNSPECIFIED.);+#3477 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#3478 = CARTESIAN_POINT('',(0.944502249772,-5.00001E-02));+#3479 = CARTESIAN_POINT('',(0.88900224632,-5.00001E-02));+#3480 = CARTESIAN_POINT('',(0.833501119485,-5.00001E-02));+#3481 = CARTESIAN_POINT('',(0.583451223997,-5.00001E-02));+#3482 = CARTESIAN_POINT('',(0.388902515126,-5.00001E-02));+#3483 = CARTESIAN_POINT('',(0.194402665804,-5.00001E-02));+#3484 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#3485 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3486 = ORIENTED_EDGE('',*,*,#3487,.T.);+#3487 = EDGE_CURVE('',#3443,#3488,#3490,.T.);+#3488 = VERTEX_POINT('',#3489);+#3489 = CARTESIAN_POINT('',(0.751811439379,2.019727787987E-02,1.75));+#3490 = SURFACE_CURVE('',#3491,(#3497,#3506),.PCURVE_S1.);+#3491 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#3492,#3493,#3494,#3495,#3496),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#3492 = CARTESIAN_POINT('',(0.771292501732,-3.294591427213E-02,1.75));+#3493 = CARTESIAN_POINT('',(0.771292501732,-1.619564690751E-02,1.75));+#3494 = CARTESIAN_POINT('',(0.768049215816,-1.74825142383E-03,1.75));+#3495 = CARTESIAN_POINT('',(0.761553601474,1.038348224004E-02,1.75));+#3496 = CARTESIAN_POINT('',(0.751811439379,2.019727787987E-02,1.75));+#3497 = PCURVE('',#2438,#3498);+#3498 = DEFINITIONAL_REPRESENTATION('',(#3499),#3505);+#3499 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#3500,#3501,#3502,#3503,#3504),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#3500 = CARTESIAN_POINT('',(3.302789646844,-0.599351161262));+#3501 = CARTESIAN_POINT('',(3.289346608918,-0.609343968079));+#3502 = CARTESIAN_POINT('',(3.275816889654,-0.615360016321));+#3503 = CARTESIAN_POINT('',(3.262205359159,-0.617384418688));+#3504 = CARTESIAN_POINT('',(3.248517292826,-0.615420456571));+#3505 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3506 = PCURVE('',#3507,#3514);+#3507 = SURFACE_OF_LINEAR_EXTRUSION('',#3508,#3512);+#3508 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#3509,#3510,#3511),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#3509 = CARTESIAN_POINT('',(0.751811439379,2.019727787987E-02,1.8000001)+ );+#3510 = CARTESIAN_POINT('',(0.771292501732,5.72972422124E-04,1.8000001)+ );+#3511 = CARTESIAN_POINT('',(0.771292501732,-3.294591427213E-02,1.8000001+ ));+#3512 = VECTOR('',#3513,1.);+#3513 = DIRECTION('',(0.,0.,1.));+#3514 = DEFINITIONAL_REPRESENTATION('',(#3515),#3521);+#3515 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#3516,#3517,#3518,#3519,#3520),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#3516 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#3517 = CARTESIAN_POINT('',(0.750136877794,-5.00001E-02));+#3518 = CARTESIAN_POINT('',(0.500119303818,-5.00001E-02));+#3519 = CARTESIAN_POINT('',(0.250041859085,-5.00001E-02));+#3520 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#3521 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3522 = ORIENTED_EDGE('',*,*,#3523,.T.);+#3523 = EDGE_CURVE('',#3488,#3524,#3526,.T.);+#3524 = VERTEX_POINT('',#3525);+#3525 = CARTESIAN_POINT('',(0.699097976544,3.982158333762E-02,1.75));+#3526 = SURFACE_CURVE('',#3527,(#3536,#3548),.PCURVE_S1.);+#3527 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#3528,#3529,#3530,#3531,#3532,+ #3533,#3534,#3535),.UNSPECIFIED.,.F.,.F.,(5,3,5),(0.,0.202963550181,+ 1.),.UNSPECIFIED.);+#3528 = CARTESIAN_POINT('',(0.751811439379,2.019727787987E-02,1.75));+#3529 = CARTESIAN_POINT('',(0.749834174272,2.218908170181E-02,1.75));+#3530 = CARTESIAN_POINT('',(0.74776240613,2.404617407667E-02,1.75));+#3531 = CARTESIAN_POINT('',(0.745596152605,2.576850449866E-02,1.75));+#3532 = CARTESIAN_POINT('',(0.734457682514,3.359031975579E-02,1.75));+#3533 = CARTESIAN_POINT('',(0.724123376014,3.774600321807E-02,1.75));+#3534 = CARTESIAN_POINT('',(0.712334687692,3.982158333762E-02,1.75));+#3535 = CARTESIAN_POINT('',(0.699097976544,3.982158333762E-02,1.75));+#3536 = PCURVE('',#2438,#3537);+#3537 = DEFINITIONAL_REPRESENTATION('',(#3538),#3547);+#3538 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#3539,#3540,#3541,#3542,#3543,+ #3544,#3545,#3546),.UNSPECIFIED.,.F.,.F.,(5,3,5),(0.,0.202963550181,+ 1.),.UNSPECIFIED.);+#3539 = CARTESIAN_POINT('',(3.248517292826,-0.615420456571));+#3540 = CARTESIAN_POINT('',(3.245739168659,-0.615021851649));+#3541 = CARTESIAN_POINT('',(3.243012779817,-0.614467037081));+#3542 = CARTESIAN_POINT('',(3.240338177364,-0.613755996901));+#3543 = CARTESIAN_POINT('',(3.227415784288,-0.609483050954));+#3544 = CARTESIAN_POINT('',(3.217915414211,-0.603668365727));+#3545 = CARTESIAN_POINT('',(3.209216795609,-0.595445517098));+#3546 = CARTESIAN_POINT('',(3.201320091961,-0.584822306965));+#3547 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3548 = PCURVE('',#3549,#3556);+#3549 = SURFACE_OF_LINEAR_EXTRUSION('',#3550,#3554);+#3550 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#3551,#3552,#3553),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#3551 = CARTESIAN_POINT('',(0.699097976544,3.982158333762E-02,1.8000001)+ );+#3552 = CARTESIAN_POINT('',(0.732330377027,3.982158333762E-02,1.8000001)+ );+#3553 = CARTESIAN_POINT('',(0.751811439379,2.019727787987E-02,1.8000001)+ );+#3554 = VECTOR('',#3555,1.);+#3555 = DIRECTION('',(0.,0.,1.));+#3556 = DEFINITIONAL_REPRESENTATION('',(#3557),#3566);+#3557 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#3558,#3559,#3560,#3561,#3562,+ #3563,#3564,#3565),.UNSPECIFIED.,.F.,.F.,(5,3,5),(0.,0.202963550181,+ 1.),.UNSPECIFIED.);+#3558 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#3559 = CARTESIAN_POINT('',(0.94925160979,-5.00001E-02));+#3560 = CARTESIAN_POINT('',(0.898501614354,-5.00001E-02));+#3561 = CARTESIAN_POINT('',(0.847750811712,-5.00001E-02));+#3562 = CARTESIAN_POINT('',(0.59770191541,-5.00001E-02));+#3563 = CARTESIAN_POINT('',(0.398403669162,-5.00001E-02));+#3564 = CARTESIAN_POINT('',(0.199153701744,-5.00001E-02));+#3565 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#3566 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3567 = ORIENTED_EDGE('',*,*,#3568,.T.);+#3568 = EDGE_CURVE('',#3524,#3569,#3571,.T.);+#3569 = VERTEX_POINT('',#3570);+#3570 = CARTESIAN_POINT('',(0.68656420481,3.874726004614E-02,1.75));+#3571 = SURFACE_CURVE('',#3572,(#3578,#3587),.PCURVE_S1.);+#3572 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#3573,#3574,#3575,#3576,#3577),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#3573 = CARTESIAN_POINT('',(0.699097976544,3.982158333762E-02,1.75));+#3574 = CARTESIAN_POINT('',(0.695946628632,3.982158333762E-02,1.75));+#3575 = CARTESIAN_POINT('',(0.692807215746,3.964252950223E-02,1.75));+#3576 = CARTESIAN_POINT('',(0.689679740353,3.928442134658E-02,1.75));+#3577 = CARTESIAN_POINT('',(0.68656420481,3.874726004614E-02,1.75));+#3578 = PCURVE('',#2438,#3579);+#3579 = DEFINITIONAL_REPRESENTATION('',(#3580),#3586);+#3580 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#3581,#3582,#3583,#3584,#3585),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#3581 = CARTESIAN_POINT('',(3.201320091961,-0.584822306965));+#3582 = CARTESIAN_POINT('',(3.199440073558,-0.582293171843));+#3583 = CARTESIAN_POINT('',(3.197710876145,-0.579666796041));+#3584 = CARTESIAN_POINT('',(3.196132501583,-0.57694318125));+#3585 = CARTESIAN_POINT('',(3.194704950335,-0.574122330064));+#3586 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3587 = PCURVE('',#3588,#3595);+#3588 = SURFACE_OF_LINEAR_EXTRUSION('',#3589,#3593);+#3589 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#3590,#3591,#3592),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#3590 = CARTESIAN_POINT('',(0.68656420481,3.874726004614E-02,1.8000001)+ );+#3591 = CARTESIAN_POINT('',(0.692795279901,3.982158333762E-02,1.8000001)+ );+#3592 = CARTESIAN_POINT('',(0.699097976544,3.982158333762E-02,1.8000001)+ );+#3593 = VECTOR('',#3594,1.);+#3594 = DIRECTION('',(0.,0.,1.));+#3595 = DEFINITIONAL_REPRESENTATION('',(#3596),#3602);+#3596 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#3597,#3598,#3599,#3600,#3601),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#3597 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#3598 = CARTESIAN_POINT('',(0.750000032482,-5.00001E-02));+#3599 = CARTESIAN_POINT('',(0.499999914517,-5.00001E-02));+#3600 = CARTESIAN_POINT('',(0.249999839296,-5.00001E-02));+#3601 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#3602 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3603 = ORIENTED_EDGE('',*,*,#3604,.T.);+#3604 = EDGE_CURVE('',#3569,#3605,#3607,.T.);+#3605 = VERTEX_POINT('',#3606);+#3606 = CARTESIAN_POINT('',(0.674173676182,3.538104706616E-02,1.75));+#3607 = SURFACE_CURVE('',#3608,(#3614,#3623),.PCURVE_S1.);+#3608 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#3609,#3610,#3611,#3612,#3613),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#3609 = CARTESIAN_POINT('',(0.68656420481,3.874726004614E-02,1.75));+#3610 = CARTESIAN_POINT('',(0.683448658807,3.821009694208E-02,1.75));+#3611 = CARTESIAN_POINT('',(0.680345053373,3.747000562047E-02,1.75));+#3612 = CARTESIAN_POINT('',(0.677253391536,3.652698766308E-02,1.75));+#3613 = CARTESIAN_POINT('',(0.674173676182,3.538104706616E-02,1.75));+#3614 = PCURVE('',#2438,#3615);+#3615 = DEFINITIONAL_REPRESENTATION('',(#3616),#3622);+#3616 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#3617,#3618,#3619,#3620,#3621),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#3617 = CARTESIAN_POINT('',(3.194704950335,-0.574122330064));+#3618 = CARTESIAN_POINT('',(3.193277394294,-0.571301469406));+#3619 = CARTESIAN_POINT('',(3.192019823094,-0.568369129636));+#3620 = CARTESIAN_POINT('',(3.190932237271,-0.565325314126));+#3621 = CARTESIAN_POINT('',(3.19001463534,-0.562170027576));+#3622 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3623 = PCURVE('',#3624,#3631);+#3624 = SURFACE_OF_LINEAR_EXTRUSION('',#3625,#3629);+#3625 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#3626,#3627,#3628),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#3626 = CARTESIAN_POINT('',(0.674173676182,3.538104706616E-02,1.8000001)+ );+#3627 = CARTESIAN_POINT('',(0.68033312972,3.767293675465E-02,1.8000001)+ );+#3628 = CARTESIAN_POINT('',(0.68656420481,3.874726004614E-02,1.8000001)+ );+#3629 = VECTOR('',#3630,1.);+#3630 = DIRECTION('',(0.,0.,1.));+#3631 = DEFINITIONAL_REPRESENTATION('',(#3632),#3638);+#3632 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#3633,#3634,#3635,#3636,#3637),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#3633 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#3634 = CARTESIAN_POINT('',(0.749999321287,-5.00001E-02));+#3635 = CARTESIAN_POINT('',(0.499998929789,-5.00001E-02));+#3636 = CARTESIAN_POINT('',(0.249999073401,-5.00001E-02));+#3637 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#3638 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3639 = ORIENTED_EDGE('',*,*,#3640,.T.);+#3640 = EDGE_CURVE('',#3605,#3641,#3643,.T.);+#3641 = VERTEX_POINT('',#3642);+#3642 = CARTESIAN_POINT('',(0.674173676182,8.795126679604E-02,1.75));+#3643 = SURFACE_CURVE('',#3644,(#3648,#3655),.PCURVE_S1.);+#3644 = LINE('',#3645,#3646);+#3645 = CARTESIAN_POINT('',(0.674173676182,1.174061273781,1.75));+#3646 = VECTOR('',#3647,1.);+#3647 = DIRECTION('',(0.,1.,0.));+#3648 = PCURVE('',#2438,#3649);+#3649 = DEFINITIONAL_REPRESENTATION('',(#3650),#3654);+#3650 = LINE('',#3651,#3652);+#3651 = CARTESIAN_POINT('',(2.276159283624,-1.241479275893));+#3652 = VECTOR('',#3653,1.);+#3653 = DIRECTION('',(-0.802556617983,-0.596575959062));+#3654 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3655 = PCURVE('',#3656,#3661);+#3656 = PLANE('',#3657);+#3657 = AXIS2_PLACEMENT_3D('',#3658,#3659,#3660);+#3658 = CARTESIAN_POINT('',(0.674173676182,8.795126679604E-02,1.8000001)+ );+#3659 = DIRECTION('',(-1.,0.,0.));+#3660 = DIRECTION('',(0.,-1.,0.));+#3661 = DEFINITIONAL_REPRESENTATION('',(#3662),#3665);+#3662 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#3663,#3664),.UNSPECIFIED.,.F.,+ .F.,(2,2),(-1.138680226714,-1.086110006984),.PIECEWISE_BEZIER_KNOTS.);+#3663 = CARTESIAN_POINT('',(5.257021972988E-02,-5.00001E-02));+#3664 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#3665 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3666 = ORIENTED_EDGE('',*,*,#3667,.T.);+#3667 = EDGE_CURVE('',#3641,#3668,#3670,.T.);+#3668 = VERTEX_POINT('',#3669);+#3669 = CARTESIAN_POINT('',(0.756108732545,8.795126679604E-02,1.75));+#3670 = SURFACE_CURVE('',#3671,(#3675,#3682),.PCURVE_S1.);+#3671 = LINE('',#3672,#3673);+#3672 = CARTESIAN_POINT('',(-0.461988453918,8.795126679604E-02,1.75));+#3673 = VECTOR('',#3674,1.);+#3674 = DIRECTION('',(1.,-0.,0.));+#3675 = PCURVE('',#2438,#3676);+#3676 = DEFINITIONAL_REPRESENTATION('',(#3677),#3681);+#3677 = LINE('',#3678,#3679);+#3678 = CARTESIAN_POINT('',(2.470017045172,0.318302279784));+#3679 = VECTOR('',#3680,1.);+#3680 = DIRECTION('',(0.596575959062,-0.802556617983));+#3681 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3682 = PCURVE('',#3683,#3688);+#3683 = PLANE('',#3684);+#3684 = AXIS2_PLACEMENT_3D('',#3685,#3686,#3687);+#3685 = CARTESIAN_POINT('',(0.756108732545,8.795126679604E-02,1.8000001)+ );+#3686 = DIRECTION('',(0.,1.,0.));+#3687 = DIRECTION('',(-1.,0.,0.));+#3688 = DEFINITIONAL_REPRESENTATION('',(#3689),#3692);+#3689 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#3690,#3691),.UNSPECIFIED.,.F.,+ .F.,(2,2),(1.1361621301,1.218097186464),.PIECEWISE_BEZIER_KNOTS.);+#3690 = CARTESIAN_POINT('',(8.193505636374E-02,-5.00001E-02));+#3691 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#3692 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3693 = ORIENTED_EDGE('',*,*,#3694,.T.);+#3694 = EDGE_CURVE('',#3668,#2955,#3695,.T.);+#3695 = SURFACE_CURVE('',#3696,(#3700,#3707),.PCURVE_S1.);+#3696 = LINE('',#3697,#3698);+#3697 = CARTESIAN_POINT('',(0.756108732545,1.186236937751,1.75));+#3698 = VECTOR('',#3699,1.);+#3699 = DIRECTION('',(0.,1.,0.));+#3700 = PCURVE('',#2438,#3701);+#3701 = DEFINITIONAL_REPRESENTATION('',(#3702),#3706);+#3702 = LINE('',#3703,#3704);+#3703 = CARTESIAN_POINT('',(2.315268108757,-1.314500506033));+#3704 = VECTOR('',#3705,1.);+#3705 = DIRECTION('',(-0.802556617983,-0.596575959062));+#3706 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3707 = PCURVE('',#3708,#3713);+#3708 = PLANE('',#3709);+#3709 = AXIS2_PLACEMENT_3D('',#3710,#3711,#3712);+#3710 = CARTESIAN_POINT('',(0.756108732545,0.112302594736,1.8000001));+#3711 = DIRECTION('',(-1.,0.,0.));+#3712 = DIRECTION('',(0.,-1.,0.));+#3713 = DEFINITIONAL_REPRESENTATION('',(#3714),#3717);+#3714 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#3715,#3716),.UNSPECIFIED.,.F.,+ .F.,(2,2),(-1.098285670955,-1.073934343014),.PIECEWISE_BEZIER_KNOTS.);+#3715 = CARTESIAN_POINT('',(2.435132794027E-02,-5.00001E-02));+#3716 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#3717 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3718 = FACE_BOUND('',#3719,.F.);+#3719 = EDGE_LOOP('',(#3720,#3758,#3803,#3848,#3884,#3920,#3965,#4010));+#3720 = ORIENTED_EDGE('',*,*,#3721,.T.);+#3721 = EDGE_CURVE('',#3722,#3724,#3726,.T.);+#3722 = VERTEX_POINT('',#3723);+#3723 = CARTESIAN_POINT('',(0.599114288883,5.156751799116E-03,1.75));+#3724 = VERTEX_POINT('',#3725);+#3725 = CARTESIAN_POINT('',(0.581567008456,8.809450990157E-02,1.75));+#3726 = SURFACE_CURVE('',#3727,(#3733,#3742),.PCURVE_S1.);+#3727 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#3728,#3729,#3730,#3731,#3732),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#3728 = CARTESIAN_POINT('',(0.599114288883,5.156751799116E-03,1.75));+#3729 = CARTESIAN_POINT('',(0.599114288883,3.252658214706E-02,1.75));+#3730 = CARTESIAN_POINT('',(0.596202810918,5.550484979679E-02,1.75));+#3731 = CARTESIAN_POINT('',(0.590354362433,7.40347435384E-02,1.75));+#3732 = CARTESIAN_POINT('',(0.581567008456,8.809450990157E-02,1.75));+#3733 = PCURVE('',#2438,#3734);+#3734 = DEFINITIONAL_REPRESENTATION('',(#3735),#3741);+#3735 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#3736,#3737,#3738,#3739,#3740),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#3736 = CARTESIAN_POINT('',(3.169492717566,-0.483899531622));+#3737 = CARTESIAN_POINT('',(3.147526879088,-0.500227714411));+#3738 = CARTESIAN_POINT('',(3.127348600556,-0.511599370563));+#3739 = CARTESIAN_POINT('',(3.108988267939,-0.517960148656));+#3740 = CARTESIAN_POINT('',(3.092462185271,-0.51929551817));+#3741 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3742 = PCURVE('',#3743,#3750);+#3743 = SURFACE_OF_LINEAR_EXTRUSION('',#3744,#3748);+#3744 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#3745,#3746,#3747),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#3745 = CARTESIAN_POINT('',(0.581567008456,8.809450990157E-02,1.8000001)+ );+#3746 = CARTESIAN_POINT('',(0.599114288883,6.001886121749E-02,1.8000001)+ );+#3747 = CARTESIAN_POINT('',(0.599114288883,5.156751799116E-03,1.8000001)+ );+#3748 = VECTOR('',#3749,1.);+#3749 = DIRECTION('',(0.,0.,1.));+#3750 = DEFINITIONAL_REPRESENTATION('',(#3751),#3757);+#3751 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#3752,#3753,#3754,#3755,#3756),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#3752 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#3753 = CARTESIAN_POINT('',(0.750557984025,-5.00001E-02));+#3754 = CARTESIAN_POINT('',(0.500633872635,-5.00001E-02));+#3755 = CARTESIAN_POINT('',(0.250390766058,-5.00001E-02));+#3756 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#3757 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3758 = ORIENTED_EDGE('',*,*,#3759,.T.);+#3759 = EDGE_CURVE('',#3724,#3760,#3762,.T.);+#3760 = VERTEX_POINT('',#3761);+#3761 = CARTESIAN_POINT('',(0.529784625806,0.116170158586,1.75));+#3762 = SURFACE_CURVE('',#3763,(#3772,#3784),.PCURVE_S1.);+#3763 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#3764,#3765,#3766,#3767,#3768,+ #3769,#3770,#3771),.UNSPECIFIED.,.F.,.F.,(5,3,5),(0.,0.461987902767,+ 1.),.UNSPECIFIED.);+#3764 = CARTESIAN_POINT('',(0.581567008456,8.809450990157E-02,1.75));+#3765 = CARTESIAN_POINT('',(0.57751482176,9.457800861509E-02,1.75));+#3766 = CARTESIAN_POINT('',(0.572868113328,0.100065322685,1.75));+#3767 = CARTESIAN_POINT('',(0.567626681692,0.104554109044,1.75));+#3768 = CARTESIAN_POINT('',(0.554995883891,0.112107816539,1.75));+#3769 = CARTESIAN_POINT('',(0.547394990979,0.114816873729,1.75));+#3770 = CARTESIAN_POINT('',(0.538990119258,0.116170158586,1.75));+#3771 = CARTESIAN_POINT('',(0.529784625806,0.116170158586,1.75));+#3772 = PCURVE('',#2438,#3773);+#3773 = DEFINITIONAL_REPRESENTATION('',(#3774),#3783);+#3774 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#3775,#3776,#3777,#3778,#3779,+ #3780,#3781,#3782),.UNSPECIFIED.,.F.,.F.,(5,3,5),(0.,0.461987902767,+ 1.),.UNSPECIFIED.);+#3775 = CARTESIAN_POINT('',(3.092462185271,-0.51929551817));+#3776 = CARTESIAN_POINT('',(3.084841373306,-0.519911308383));+#3777 = CARTESIAN_POINT('',(3.077665378545,-0.519455661433));+#3778 = CARTESIAN_POINT('',(3.070935961241,-0.517927017813));+#3779 = CARTESIAN_POINT('',(3.057338452988,-0.51229644774));+#3780 = CARTESIAN_POINT('',(3.050629771234,-0.507812459223));+#3781 = CARTESIAN_POINT('',(3.044529539108,-0.501874411011));+#3782 = CARTESIAN_POINT('',(3.039037763023,-0.494486481319));+#3783 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3784 = PCURVE('',#3785,#3792);+#3785 = SURFACE_OF_LINEAR_EXTRUSION('',#3786,#3790);+#3786 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#3787,#3788,#3789),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#3787 = CARTESIAN_POINT('',(0.529784625806,0.116170158586,1.8000001));+#3788 = CARTESIAN_POINT('',(0.564019728028,0.116170158586,1.8000001));+#3789 = CARTESIAN_POINT('',(0.581567008456,8.809450990157E-02,1.8000001)+ );+#3790 = VECTOR('',#3791,1.);+#3791 = DIRECTION('',(0.,0.,1.));+#3792 = DEFINITIONAL_REPRESENTATION('',(#3793),#3802);+#3793 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#3794,#3795,#3796,#3797,#3798,+ #3799,#3800,#3801),.UNSPECIFIED.,.F.,.F.,(5,3,5),(0.,0.461987902767,+ 1.),.UNSPECIFIED.);+#3794 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#3795 = CARTESIAN_POINT('',(0.884535192998,-5.00001E-02));+#3796 = CARTESIAN_POINT('',(0.769035308225,-5.00001E-02));+#3797 = CARTESIAN_POINT('',(0.653517743368,-5.00001E-02));+#3798 = CARTESIAN_POINT('',(0.40347279051,-5.00001E-02));+#3799 = CARTESIAN_POINT('',(0.268945321116,-5.00001E-02));+#3800 = CARTESIAN_POINT('',(0.134445245582,-5.00001E-02));+#3801 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#3802 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3803 = ORIENTED_EDGE('',*,*,#3804,.T.);+#3804 = EDGE_CURVE('',#3760,#3805,#3807,.T.);+#3805 = VERTEX_POINT('',#3806);+#3806 = CARTESIAN_POINT('',(0.47807386471,8.809450990157E-02,1.75));+#3807 = SURFACE_CURVE('',#3808,(#3817,#3829),.PCURVE_S1.);+#3808 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#3809,#3810,#3811,#3812,#3813,+ #3814,#3815,#3816),.UNSPECIFIED.,.F.,.F.,(5,3,5),(0.,0.534013424926,+ 1.),.UNSPECIFIED.);+#3809 = CARTESIAN_POINT('',(0.529784625806,0.116170158586,1.75));+#3810 = CARTESIAN_POINT('',(0.520647580527,0.116170158586,1.75));+#3811 = CARTESIAN_POINT('',(0.51230268033,0.114836923818,1.75));+#3812 = CARTESIAN_POINT('',(0.504753224404,0.112168011466,1.75));+#3813 = CARTESIAN_POINT('',(0.492108164133,0.104670461086,1.75));+#3814 = CARTESIAN_POINT('',(0.486822478125,0.10016025603,1.75));+#3815 = CARTESIAN_POINT('',(0.482144448774,9.463413675835E-02,1.75));+#3816 = CARTESIAN_POINT('',(0.47807386471,8.809450990157E-02,1.75));+#3817 = PCURVE('',#2438,#3818);+#3818 = DEFINITIONAL_REPRESENTATION('',(#3819),#3828);+#3819 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#3820,#3821,#3822,#3823,#3824,+ #3825,#3826,#3827),.UNSPECIFIED.,.F.,.F.,(5,3,5),(0.,0.534013424926,+ 1.),.UNSPECIFIED.);+#3820 = CARTESIAN_POINT('',(3.039037763023,-0.494486481319));+#3821 = CARTESIAN_POINT('',(3.033586821473,-0.487153485162));+#3822 = CARTESIAN_POINT('',(3.029678451021,-0.479660854472));+#3823 = CARTESIAN_POINT('',(3.027316580382,-0.472009779711));+#3824 = CARTESIAN_POINT('',(3.025790050099,-0.457388544597));+#3825 = CARTESIAN_POINT('',(3.026256431817,-0.450455802403));+#3826 = CARTESIAN_POINT('',(3.027900655563,-0.443404669084));+#3827 = CARTESIAN_POINT('',(3.030720663784,-0.43623641074));+#3828 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3829 = PCURVE('',#3830,#3837);+#3830 = SURFACE_OF_LINEAR_EXTRUSION('',#3831,#3835);+#3831 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#3832,#3833,#3834),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#3832 = CARTESIAN_POINT('',(0.47807386471,8.809450990157E-02,1.8000001)+ );+#3833 = CARTESIAN_POINT('',(0.495549523585,0.116170158586,1.8000001));+#3834 = CARTESIAN_POINT('',(0.529784625806,0.116170158586,1.8000001));+#3835 = VECTOR('',#3836,1.);+#3836 = DIRECTION('',(0.,0.,1.));+#3837 = DEFINITIONAL_REPRESENTATION('',(#3838),#3847);+#3838 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#3839,#3840,#3841,#3842,#3843,+ #3844,#3845,#3846),.UNSPECIFIED.,.F.,.F.,(5,3,5),(0.,0.534013424926,+ 1.),.UNSPECIFIED.);+#3839 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#3840 = CARTESIAN_POINT('',(0.866554432636,-5.00001E-02));+#3841 = CARTESIAN_POINT('',(0.733054616167,-5.00001E-02));+#3842 = CARTESIAN_POINT('',(0.599527437871,-5.00001E-02));+#3843 = CARTESIAN_POINT('',(0.349482342302,-5.00001E-02));+#3844 = CARTESIAN_POINT('',(0.232964473587,-5.00001E-02));+#3845 = CARTESIAN_POINT('',(0.11646439465,-5.00001E-02));+#3846 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#3847 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3848 = ORIENTED_EDGE('',*,*,#3849,.T.);+#3849 = EDGE_CURVE('',#3805,#3850,#3852,.T.);+#3850 = VERTEX_POINT('',#3851);+#3851 = CARTESIAN_POINT('',(0.460598205835,5.156751799116E-03,1.75));+#3852 = SURFACE_CURVE('',#3853,(#3859,#3868),.PCURVE_S1.);+#3853 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#3854,#3855,#3856,#3857,#3858),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#3854 = CARTESIAN_POINT('',(0.47807386471,8.809450990157E-02,1.75));+#3855 = CARTESIAN_POINT('',(0.469322348302,7.40346966565E-02,1.75));+#3856 = CARTESIAN_POINT('',(0.46349779062,5.550477331356E-02,1.75));+#3857 = CARTESIAN_POINT('',(0.460598205835,3.252653669294E-02,1.75));+#3858 = CARTESIAN_POINT('',(0.460598205835,5.156751799116E-03,1.75));+#3859 = PCURVE('',#2438,#3860);+#3860 = DEFINITIONAL_REPRESENTATION('',(#3861),#3867);+#3861 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#3862,#3863,#3864,#3865,#3866),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#3862 = CARTESIAN_POINT('',(3.030720663784,-0.43623641074));+#3863 = CARTESIAN_POINT('',(3.036783515657,-0.420825076759));+#3864 = CARTESIAN_POINT('',(3.048180037181,-0.405096032655));+#3865 = CARTESIAN_POINT('',(3.064891550477,-0.389060688147));+#3866 = CARTESIAN_POINT('',(3.086857352476,-0.372732532474));+#3867 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3868 = PCURVE('',#3869,#3876);+#3869 = SURFACE_OF_LINEAR_EXTRUSION('',#3870,#3874);+#3870 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#3871,#3872,#3873),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#3871 = CARTESIAN_POINT('',(0.460598205835,5.156751799116E-03,1.8000001)+ );+#3872 = CARTESIAN_POINT('',(0.460598205835,6.001886121749E-02,1.8000001)+ );+#3873 = CARTESIAN_POINT('',(0.47807386471,8.809450990157E-02,1.8000001)+ );+#3874 = VECTOR('',#3875,1.);+#3875 = DIRECTION('',(0.,0.,1.));+#3876 = DEFINITIONAL_REPRESENTATION('',(#3877),#3883);+#3877 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#3878,#3879,#3880,#3881,#3882),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#3878 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#3879 = CARTESIAN_POINT('',(0.749608399021,-5.00001E-02));+#3880 = CARTESIAN_POINT('',(0.499365296252,-5.00001E-02));+#3881 = CARTESIAN_POINT('',(0.249441601717,-5.00001E-02));+#3882 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#3883 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3884 = ORIENTED_EDGE('',*,*,#3885,.T.);+#3885 = EDGE_CURVE('',#3850,#3886,#3888,.T.);+#3886 = VERTEX_POINT('',#3887);+#3887 = CARTESIAN_POINT('',(0.47807386471,-7.763776319781E-02,1.75));+#3888 = SURFACE_CURVE('',#3889,(#3895,#3904),.PCURVE_S1.);+#3889 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#3890,#3891,#3892,#3893,#3894),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#3890 = CARTESIAN_POINT('',(0.460598205835,5.156751799116E-03,1.75));+#3891 = CARTESIAN_POINT('',(0.460598205835,-2.214206251037E-02,1.75));+#3892 = CARTESIAN_POINT('',(0.463497895377,-4.507238359248E-02,1.75));+#3893 = CARTESIAN_POINT('',(0.469322462387,-6.357813323637E-02,1.75));+#3894 = CARTESIAN_POINT('',(0.47807386471,-7.763776319781E-02,1.75));+#3895 = PCURVE('',#2438,#3896);+#3896 = DEFINITIONAL_REPRESENTATION('',(#3897),#3903);+#3897 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#3898,#3899,#3900,#3901,#3902),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#3898 = CARTESIAN_POINT('',(3.086857352476,-0.372732532474));+#3899 = CARTESIAN_POINT('',(3.108766196563,-0.356446716146));+#3900 = CARTESIAN_POINT('',(3.12889896257,-0.345094202887));+#3901 = CARTESIAN_POINT('',(3.147225671067,-0.338728662346));+#3902 = CARTESIAN_POINT('',(3.163730196373,-0.337364520969));+#3903 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3904 = PCURVE('',#3905,#3912);+#3905 = SURFACE_OF_LINEAR_EXTRUSION('',#3906,#3910);+#3906 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#3907,#3908,#3909),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#3907 = CARTESIAN_POINT('',(0.47807386471,-7.763776319781E-02,1.8000001)+ );+#3908 = CARTESIAN_POINT('',(0.460598205835,-4.956211451373E-02,1.8000001+ ));+#3909 = CARTESIAN_POINT('',(0.460598205835,5.156751799116E-03,1.8000001)+ );+#3910 = VECTOR('',#3911,1.);+#3911 = DIRECTION('',(0.,0.,1.));+#3912 = DEFINITIONAL_REPRESENTATION('',(#3913),#3919);+#3913 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#3914,#3915,#3916,#3917,#3918),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#3914 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#3915 = CARTESIAN_POINT('',(0.750553911759,-5.00001E-02));+#3916 = CARTESIAN_POINT('',(0.500629515668,-5.00001E-02));+#3917 = CARTESIAN_POINT('',(0.250388336876,-5.00001E-02));+#3918 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#3919 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3920 = ORIENTED_EDGE('',*,*,#3921,.T.);+#3921 = EDGE_CURVE('',#3886,#3922,#3924,.T.);+#3922 = VERTEX_POINT('',#3923);+#3923 = CARTESIAN_POINT('',(0.529784625806,-0.105713411882,1.75));+#3924 = SURFACE_CURVE('',#3925,(#3934,#3946),.PCURVE_S1.);+#3925 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#3926,#3927,#3928,#3929,#3930,+ #3931,#3932,#3933),.UNSPECIFIED.,.F.,.F.,(5,3,5),(0.,0.461987296673,+ 1.),.UNSPECIFIED.);+#3926 = CARTESIAN_POINT('',(0.47807386471,-7.763776319781E-02,1.75));+#3927 = CARTESIAN_POINT('',(0.482109513436,-8.412126443018E-02,1.75));+#3928 = CARTESIAN_POINT('',(0.486742225523,-8.960858004166E-02,1.75));+#3929 = CARTESIAN_POINT('',(0.491972206953,-9.409736488783E-02,1.75));+#3930 = CARTESIAN_POINT('',(0.504583742432,-0.101651076779,1.75));+#3931 = CARTESIAN_POINT('',(0.512177733202,-0.104360132898,1.75));+#3932 = CARTESIAN_POINT('',(0.520579152312,-0.105713411882,1.75));+#3933 = CARTESIAN_POINT('',(0.529784625806,-0.105713411882,1.75));+#3934 = PCURVE('',#2438,#3935);+#3935 = DEFINITIONAL_REPRESENTATION('',(#3936),#3945);+#3936 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#3937,#3938,#3939,#3940,#3941,+ #3942,#3943,#3944),.UNSPECIFIED.,.F.,.F.,(5,3,5),(0.,0.461987296673,+ 1.),.UNSPECIFIED.);+#3937 = CARTESIAN_POINT('',(3.163730196373,-0.337364520969));+#3938 = CARTESIAN_POINT('',(3.171341144204,-0.336735456596));+#3939 = CARTESIAN_POINT('',(3.17850879032,-0.337179869767));+#3940 = CARTESIAN_POINT('',(3.185231375492,-0.338699324851));+#3941 = CARTESIAN_POINT('',(3.198817395834,-0.344314433197));+#3942 = CARTESIAN_POINT('',(3.205521959078,-0.348792882994));+#3943 = CARTESIAN_POINT('',(3.211620126745,-0.354728163793));+#3944 = CARTESIAN_POINT('',(3.217111890924,-0.362116077468));+#3945 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3946 = PCURVE('',#3947,#3954);+#3947 = SURFACE_OF_LINEAR_EXTRUSION('',#3948,#3952);+#3948 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#3949,#3950,#3951),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#3949 = CARTESIAN_POINT('',(0.529784625806,-0.105713411882,1.8000001));+#3950 = CARTESIAN_POINT('',(0.495549523585,-0.105713411882,1.8000001));+#3951 = CARTESIAN_POINT('',(0.47807386471,-7.763776319781E-02,1.8000001)+ );+#3952 = VECTOR('',#3953,1.);+#3953 = DIRECTION('',(0.,0.,1.));+#3954 = DEFINITIONAL_REPRESENTATION('',(#3955),#3964);+#3955 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#3956,#3957,#3958,#3959,#3960,+ #3961,#3962,#3963),.UNSPECIFIED.,.F.,.F.,(5,3,5),(0.,0.461987296673,+ 1.),.UNSPECIFIED.);+#3956 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#3957 = CARTESIAN_POINT('',(0.88453514814,-5.00001E-02));+#3958 = CARTESIAN_POINT('',(0.769035222102,-5.00001E-02));+#3959 = CARTESIAN_POINT('',(0.653517659047,-5.00001E-02));+#3960 = CARTESIAN_POINT('',(0.403472560667,-5.00001E-02));+#3961 = CARTESIAN_POINT('',(0.268944973261,-5.00001E-02));+#3962 = CARTESIAN_POINT('',(0.134444954112,-5.00001E-02));+#3963 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#3964 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3965 = ORIENTED_EDGE('',*,*,#3966,.T.);+#3966 = EDGE_CURVE('',#3922,#3967,#3969,.T.);+#3967 = VERTEX_POINT('',#3968);+#3968 = CARTESIAN_POINT('',(0.581567008456,-7.763776319781E-02,1.75));+#3969 = SURFACE_CURVE('',#3970,(#3979,#3991),.PCURVE_S1.);+#3970 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#3971,#3972,#3973,#3974,#3975,+ #3976,#3977,#3978),.UNSPECIFIED.,.F.,.F.,(5,3,5),(0.,0.534012816541,+ 1.),.UNSPECIFIED.);+#3971 = CARTESIAN_POINT('',(0.529784625806,-0.105713411882,1.75));+#3972 = CARTESIAN_POINT('',(0.538921690778,-0.105713411882,1.75));+#3973 = CARTESIAN_POINT('',(0.5472699925,-0.104380171362,1.75));+#3974 = CARTESIAN_POINT('',(0.554826248282,-0.101711257946,1.75));+#3975 = CARTESIAN_POINT('',(0.567490427823,-9.421371178959E-02,1.75));+#3976 = CARTESIAN_POINT('',(0.572787618652,-8.970350516888E-02,1.75));+#3977 = CARTESIAN_POINT('',(0.577479743284,-8.417738747245E-02,1.75));+#3978 = CARTESIAN_POINT('',(0.581567008456,-7.763776319781E-02,1.75));+#3979 = PCURVE('',#2438,#3980);+#3980 = DEFINITIONAL_REPRESENTATION('',(#3981),#3990);+#3981 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#3982,#3983,#3984,#3985,#3986,+ #3987,#3988,#3989),.UNSPECIFIED.,.F.,.F.,(5,3,5),(0.,0.534012816541,+ 1.),.UNSPECIFIED.);+#3982 = CARTESIAN_POINT('',(3.217111890924,-0.362116077468));+#3983 = CARTESIAN_POINT('',(3.222562844223,-0.36944908943));+#3984 = CARTESIAN_POINT('',(3.226473239326,-0.376944453467));+#3985 = CARTESIAN_POINT('',(3.228839165741,-0.384600986134));+#3986 = CARTESIAN_POINT('',(3.23037710551,-0.399237563024));+#3987 = CARTESIAN_POINT('',(3.229917586038,-0.406179539421));+#3988 = CARTESIAN_POINT('',(3.228281772461,-0.413241984061));+#3989 = CARTESIAN_POINT('',(3.22547171786,-0.420423628398));+#3990 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3991 = PCURVE('',#3992,#3999);+#3992 = SURFACE_OF_LINEAR_EXTRUSION('',#3993,#3997);+#3993 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#3994,#3995,#3996),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#3994 = CARTESIAN_POINT('',(0.581567008456,-7.763776319781E-02,1.8000001+ ));+#3995 = CARTESIAN_POINT('',(0.564019728028,-0.105713411882,1.8000001));+#3996 = CARTESIAN_POINT('',(0.529784625806,-0.105713411882,1.8000001));+#3997 = VECTOR('',#3998,1.);+#3998 = DIRECTION('',(0.,0.,1.));+#3999 = DEFINITIONAL_REPRESENTATION('',(#4000),#4009);+#4000 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#4001,#4002,#4003,#4004,#4005,+ #4006,#4007,#4008),.UNSPECIFIED.,.F.,.F.,(5,3,5),(0.,0.534012816541,+ 1.),.UNSPECIFIED.);+#4001 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#4002 = CARTESIAN_POINT('',(0.866554145031,-5.00001E-02));+#4003 = CARTESIAN_POINT('',(0.73305427256,-5.00001E-02));+#4004 = CARTESIAN_POINT('',(0.599527210523,-5.00001E-02));+#4005 = CARTESIAN_POINT('',(0.34948225582,-5.00001E-02));+#4006 = CARTESIAN_POINT('',(0.232964385271,-5.00001E-02));+#4007 = CARTESIAN_POINT('',(0.116464348665,-5.00001E-02));+#4008 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#4009 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4010 = ORIENTED_EDGE('',*,*,#4011,.T.);+#4011 = EDGE_CURVE('',#3967,#3722,#4012,.T.);+#4012 = SURFACE_CURVE('',#4013,(#4019,#4028),.PCURVE_S1.);+#4013 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#4014,#4015,#4016,#4017,#4018),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#4014 = CARTESIAN_POINT('',(0.581567008456,-7.763776319781E-02,1.75));+#4015 = CARTESIAN_POINT('',(0.590354247886,-6.357818010969E-02,1.75));+#4016 = CARTESIAN_POINT('',(0.596202705754,-4.507245996663E-02,1.75));+#4017 = CARTESIAN_POINT('',(0.599114288883,-2.214210783056E-02,1.75));+#4018 = CARTESIAN_POINT('',(0.599114288883,5.156751799116E-03,1.75));+#4019 = PCURVE('',#2438,#4020);+#4020 = DEFINITIONAL_REPRESENTATION('',(#4021),#4027);+#4021 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#4022,#4023,#4024,#4025,#4026),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#4022 = CARTESIAN_POINT('',(3.22547171786,-0.420423628398));+#4023 = CARTESIAN_POINT('',(3.219430362197,-0.435863494821));+#4024 = CARTESIAN_POINT('',(3.208067523387,-0.451597281131));+#4025 = CARTESIAN_POINT('',(3.191401598026,-0.467613688257));+#4026 = CARTESIAN_POINT('',(3.169492717566,-0.483899531622));+#4027 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4028 = PCURVE('',#4029,#4036);+#4029 = SURFACE_OF_LINEAR_EXTRUSION('',#4030,#4034);+#4030 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#4031,#4032,#4033),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#4031 = CARTESIAN_POINT('',(0.599114288883,5.156751799116E-03,1.8000001)+ );+#4032 = CARTESIAN_POINT('',(0.599114288883,-4.956211451373E-02,1.8000001+ ));+#4033 = CARTESIAN_POINT('',(0.581567008456,-7.763776319781E-02,1.8000001+ ));+#4034 = VECTOR('',#4035,1.);+#4035 = DIRECTION('',(0.,0.,1.));+#4036 = DEFINITIONAL_REPRESENTATION('',(#4037),#4043);+#4037 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#4038,#4039,#4040,#4041,#4042),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#4038 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#4039 = CARTESIAN_POINT('',(0.749612497892,-5.00001E-02));+#4040 = CARTESIAN_POINT('',(0.499371315595,-5.00001E-02));+#4041 = CARTESIAN_POINT('',(0.24944650236,-5.00001E-02));+#4042 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#4043 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4044 = FACE_BOUND('',#4045,.F.);+#4045 = EDGE_LOOP('',(#4046,#4075,#4102,#4129,#4156,#4183,#4210,#4237,+ #4264,#4291,#4318));+#4046 = ORIENTED_EDGE('',*,*,#4047,.T.);+#4047 = EDGE_CURVE('',#4048,#4050,#4052,.T.);+#4048 = VERTEX_POINT('',#4049);+#4049 = CARTESIAN_POINT('',(0.34858209731,-7.720803388121E-02,1.75));+#4050 = VERTEX_POINT('',#4051);+#4051 = CARTESIAN_POINT('',(0.303603762173,-7.720803388121E-02,1.75));+#4052 = SURFACE_CURVE('',#4053,(#4057,#4064),.PCURVE_S1.);+#4053 = LINE('',#4054,#4055);+#4054 = CARTESIAN_POINT('',(-0.688240939105,-7.720803388121E-02,1.75));+#4055 = VECTOR('',#4056,1.);+#4056 = DIRECTION('',(-1.,-0.,-0.));+#4057 = PCURVE('',#2438,#4058);+#4058 = DEFINITIONAL_REPRESENTATION('',(#4059),#4063);+#4059 = LINE('',#4060,#4061);+#4060 = CARTESIAN_POINT('',(2.467589941612,0.598412777305));+#4061 = VECTOR('',#4062,1.);+#4062 = DIRECTION('',(-0.596575959062,0.802556617983));+#4063 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4064 = PCURVE('',#4065,#4070);+#4065 = PLANE('',#4066);+#4066 = AXIS2_PLACEMENT_3D('',#4067,#4068,#4069);+#4067 = CARTESIAN_POINT('',(0.303603762173,-7.720803388121E-02,1.8000001+ ));+#4068 = DIRECTION('',(0.,-1.,0.));+#4069 = DIRECTION('',(1.,0.,0.));+#4070 = DEFINITIONAL_REPRESENTATION('',(#4071),#4074);+#4071 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#4072,#4073),.UNSPECIFIED.,.F.,+ .F.,(2,2),(-1.036823036414,-0.991844701277),.PIECEWISE_BEZIER_KNOTS.);+#4072 = CARTESIAN_POINT('',(4.497833513674E-02,-5.00001E-02));+#4073 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#4074 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4075 = ORIENTED_EDGE('',*,*,#4076,.T.);+#4076 = EDGE_CURVE('',#4050,#4077,#4079,.T.);+#4077 = VERTEX_POINT('',#4078);+#4078 = CARTESIAN_POINT('',(0.303603762173,-0.101559361821,1.75));+#4079 = SURFACE_CURVE('',#4080,(#4084,#4091),.PCURVE_S1.);+#4080 = LINE('',#4081,#4082);+#4081 = CARTESIAN_POINT('',(0.303603762173,1.079305959472,1.75));+#4082 = VECTOR('',#4083,1.);+#4083 = DIRECTION('',(0.,-1.,0.));+#4084 = PCURVE('',#2438,#4085);+#4085 = DEFINITIONAL_REPRESENTATION('',(#4086),#4090);+#4086 = LINE('',#4087,#4088);+#4087 = CARTESIAN_POINT('',(2.131132686362,-0.88754719647));+#4088 = VECTOR('',#4089,1.);+#4089 = DIRECTION('',(0.802556617983,0.596575959062));+#4090 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4091 = PCURVE('',#4092,#4097);+#4092 = PLANE('',#4093);+#4093 = AXIS2_PLACEMENT_3D('',#4094,#4095,#4096);+#4094 = CARTESIAN_POINT('',(0.303603762173,-0.101559361821,1.8000001));+#4095 = DIRECTION('',(1.,0.,0.));+#4096 = DIRECTION('',(0.,1.,0.));+#4097 = DEFINITIONAL_REPRESENTATION('',(#4098),#4101);+#4098 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#4099,#4100),.UNSPECIFIED.,.F.,+ .F.,(2,2),(1.156513993353,1.180865321293),.PIECEWISE_BEZIER_KNOTS.);+#4099 = CARTESIAN_POINT('',(2.435132794027E-02,-5.00001E-02));+#4100 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#4101 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4102 = ORIENTED_EDGE('',*,*,#4103,.T.);+#4103 = EDGE_CURVE('',#4077,#4104,#4106,.T.);+#4104 = VERTEX_POINT('',#4105);+#4105 = CARTESIAN_POINT('',(0.421636081131,-0.101559361821,1.75));+#4106 = SURFACE_CURVE('',#4107,(#4111,#4118),.PCURVE_S1.);+#4107 = LINE('',#4108,#4109);+#4108 = CARTESIAN_POINT('',(-0.629224779626,-0.101559361821,1.75));+#4109 = VECTOR('',#4110,1.);+#4110 = DIRECTION('',(1.,-0.,0.));+#4111 = PCURVE('',#2438,#4112);+#4112 = DEFINITIONAL_REPRESENTATION('',(#4113),#4117);+#4113 = LINE('',#4114,#4115);+#4114 = CARTESIAN_POINT('',(2.522340882949,0.565576384768));+#4115 = VECTOR('',#4116,1.);+#4116 = DIRECTION('',(0.596575959062,-0.802556617983));+#4117 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4118 = PCURVE('',#4119,#4124);+#4119 = PLANE('',#4120);+#4120 = AXIS2_PLACEMENT_3D('',#4121,#4122,#4123);+#4121 = CARTESIAN_POINT('',(0.421636081131,-0.101559361821,1.8000001));+#4122 = DIRECTION('',(0.,1.,0.));+#4123 = DIRECTION('',(-1.,0.,0.));+#4124 = DEFINITIONAL_REPRESENTATION('',(#4125),#4128);+#4125 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#4126,#4127),.UNSPECIFIED.,.F.,+ .F.,(2,2),(0.932828541799,1.050860860756),.PIECEWISE_BEZIER_KNOTS.);+#4126 = CARTESIAN_POINT('',(0.118032318958,-5.00001E-02));+#4127 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#4128 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4129 = ORIENTED_EDGE('',*,*,#4130,.T.);+#4130 = EDGE_CURVE('',#4104,#4131,#4133,.T.);+#4131 = VERTEX_POINT('',#4132);+#4132 = CARTESIAN_POINT('',(0.421636081131,-7.720803388121E-02,1.75));+#4133 = SURFACE_CURVE('',#4134,(#4138,#4145),.PCURVE_S1.);+#4134 = LINE('',#4135,#4136);+#4135 = CARTESIAN_POINT('',(0.421636081131,1.091481623442,1.75));+#4136 = VECTOR('',#4137,1.);+#4137 = DIRECTION('',(0.,1.,0.));+#4138 = PCURVE('',#2438,#4139);+#4139 = DEFINITIONAL_REPRESENTATION('',(#4140),#4144);+#4140 = LINE('',#4141,#4142);+#4141 = CARTESIAN_POINT('',(2.191776270547,-0.989538523596));+#4142 = VECTOR('',#4143,1.);+#4143 = DIRECTION('',(-0.802556617983,-0.596575959062));+#4144 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4145 = PCURVE('',#4146,#4151);+#4146 = PLANE('',#4147);+#4147 = AXIS2_PLACEMENT_3D('',#4148,#4149,#4150);+#4148 = CARTESIAN_POINT('',(0.421636081131,-7.720803388121E-02,1.8000001+ ));+#4149 = DIRECTION('',(-1.,0.,0.));+#4150 = DIRECTION('',(0.,-1.,0.));+#4151 = DEFINITIONAL_REPRESENTATION('',(#4152),#4155);+#4152 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#4153,#4154),.UNSPECIFIED.,.F.,+ .F.,(2,2),(-1.193040985263,-1.168689657323),.PIECEWISE_BEZIER_KNOTS.);+#4153 = CARTESIAN_POINT('',(2.435132794027E-02,-5.00001E-02));+#4154 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#4155 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4156 = ORIENTED_EDGE('',*,*,#4157,.T.);+#4157 = EDGE_CURVE('',#4131,#4158,#4160,.T.);+#4158 = VERTEX_POINT('',#4159);+#4159 = CARTESIAN_POINT('',(0.377230718416,-7.720803388121E-02,1.75));+#4160 = SURFACE_CURVE('',#4161,(#4165,#4172),.PCURVE_S1.);+#4161 = LINE('',#4162,#4163);+#4162 = CARTESIAN_POINT('',(-0.651427460983,-7.720803388121E-02,1.75));+#4163 = VECTOR('',#4164,1.);+#4164 = DIRECTION('',(-1.,-0.,-0.));+#4165 = PCURVE('',#2438,#4166);+#4166 = DEFINITIONAL_REPRESENTATION('',(#4167),#4171);+#4167 = LINE('',#4168,#4169);+#4168 = CARTESIAN_POINT('',(2.489551977629,0.568867876808));+#4169 = VECTOR('',#4170,1.);+#4170 = DIRECTION('',(-0.596575959062,0.802556617983));+#4171 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4172 = PCURVE('',#4173,#4178);+#4173 = PLANE('',#4174);+#4174 = AXIS2_PLACEMENT_3D('',#4175,#4176,#4177);+#4175 = CARTESIAN_POINT('',(0.377230718416,-7.720803388121E-02,1.8000001+ ));+#4176 = DIRECTION('',(0.,-1.,0.));+#4177 = DIRECTION('',(1.,0.,0.));+#4178 = DEFINITIONAL_REPRESENTATION('',(#4179),#4182);+#4179 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#4180,#4181),.UNSPECIFIED.,.F.,+ .F.,(2,2),(-1.073063542114,-1.028658179399),.PIECEWISE_BEZIER_KNOTS.);+#4180 = CARTESIAN_POINT('',(4.440536271461E-02,-5.00001E-02));+#4181 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#4182 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4183 = ORIENTED_EDGE('',*,*,#4184,.T.);+#4184 = EDGE_CURVE('',#4158,#4185,#4187,.T.);+#4185 = VERTEX_POINT('',#4186);+#4186 = CARTESIAN_POINT('',(0.377230718416,0.112302594736,1.75));+#4187 = SURFACE_CURVE('',#4188,(#4192,#4199),.PCURVE_S1.);+#4188 = LINE('',#4189,#4190);+#4189 = CARTESIAN_POINT('',(0.377230718416,1.186236937751,1.75));+#4190 = VECTOR('',#4191,1.);+#4191 = DIRECTION('',(0.,1.,0.));+#4192 = PCURVE('',#2438,#4193);+#4193 = DEFINITIONAL_REPRESENTATION('',(#4194),#4198);+#4194 = LINE('',#4195,#4196);+#4195 = CARTESIAN_POINT('',(2.08923859411,-1.010429448385));+#4196 = VECTOR('',#4197,1.);+#4197 = DIRECTION('',(-0.802556617983,-0.596575959062));+#4198 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4199 = PCURVE('',#4200,#4205);+#4200 = PLANE('',#4201);+#4201 = AXIS2_PLACEMENT_3D('',#4202,#4203,#4204);+#4202 = CARTESIAN_POINT('',(0.377230718416,0.112302594736,1.8000001));+#4203 = DIRECTION('',(-1.,0.,0.));+#4204 = DIRECTION('',(0.,-1.,0.));+#4205 = DEFINITIONAL_REPRESENTATION('',(#4206),#4209);+#4206 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#4207,#4208),.UNSPECIFIED.,.F.,+ .F.,(2,2),(-1.263444971632,-1.073934343014),.PIECEWISE_BEZIER_KNOTS.);+#4207 = CARTESIAN_POINT('',(0.189510628618,-5.00001E-02));+#4208 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#4209 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4210 = ORIENTED_EDGE('',*,*,#4211,.T.);+#4211 = EDGE_CURVE('',#4185,#4212,#4214,.T.);+#4212 = VERTEX_POINT('',#4213);+#4213 = CARTESIAN_POINT('',(0.348295611099,0.112302594736,1.75));+#4214 = SURFACE_CURVE('',#4215,(#4219,#4226),.PCURVE_S1.);+#4215 = LINE('',#4216,#4217);+#4216 = CARTESIAN_POINT('',(-0.665895014642,0.112302594736,1.75));+#4217 = VECTOR('',#4218,1.);+#4218 = DIRECTION('',(-1.,-0.,-0.));+#4219 = PCURVE('',#2438,#4220);+#4220 = DEFINITIONAL_REPRESENTATION('',(#4221),#4225);+#4221 = LINE('',#4222,#4223);+#4222 = CARTESIAN_POINT('',(2.328827973755,0.467421422723));+#4223 = VECTOR('',#4224,1.);+#4224 = DIRECTION('',(-0.596575959062,0.802556617983));+#4225 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4226 = PCURVE('',#4227,#4232);+#4227 = PLANE('',#4228);+#4228 = AXIS2_PLACEMENT_3D('',#4229,#4230,#4231);+#4229 = CARTESIAN_POINT('',(0.348295611099,0.112302594736,1.8000001));+#4230 = DIRECTION('',(0.,-1.,0.));+#4231 = DIRECTION('',(1.,0.,0.));+#4232 = DEFINITIONAL_REPRESENTATION('',(#4233),#4236);+#4233 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#4234,#4235),.UNSPECIFIED.,.F.,+ .F.,(2,2),(-1.043125733058,-1.01419062574),.PIECEWISE_BEZIER_KNOTS.);+#4234 = CARTESIAN_POINT('',(2.893510731726E-02,-5.00001E-02));+#4235 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#4236 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4237 = ORIENTED_EDGE('',*,*,#4238,.T.);+#4238 = EDGE_CURVE('',#4212,#4239,#4241,.T.);+#4239 = VERTEX_POINT('',#4240);+#4240 = CARTESIAN_POINT('',(0.30016592764,0.101702604927,1.75));+#4241 = SURFACE_CURVE('',#4242,(#4246,#4253),.PCURVE_S1.);+#4242 = LINE('',#4243,#4244);+#4243 = CARTESIAN_POINT('',(-0.417462886046,-5.634659808728E-02,1.75));+#4244 = VECTOR('',#4245,1.);+#4245 = DIRECTION('',(-0.976595648113,-0.215083565358,-0.));+#4246 = PCURVE('',#2438,#4247);+#4247 = DEFINITIONAL_REPRESENTATION('',(#4248),#4252);+#4248 = LINE('',#4249,#4250);+#4249 = CARTESIAN_POINT('',(2.612387134951,0.368652627753));+#4250 = VECTOR('',#4251,1.);+#4251 = DIRECTION('',(-0.409996746591,0.912086984769));+#4252 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4253 = PCURVE('',#4254,#4259);+#4254 = PLANE('',#4255);+#4255 = AXIS2_PLACEMENT_3D('',#4256,#4257,#4258);+#4256 = CARTESIAN_POINT('',(0.30016592764,0.101702604927,1.8000001));+#4257 = DIRECTION('',(0.215083565358,-0.976595648113,0.));+#4258 = DIRECTION('',(0.976595648113,0.215083565358,0.));+#4259 = DEFINITIONAL_REPRESENTATION('',(#4260),#4263);+#4260 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#4261,#4262),.UNSPECIFIED.,.F.,+ .F.,(2,2),(-0.784110085504,-0.734826962493),.PIECEWISE_BEZIER_KNOTS.);+#4261 = CARTESIAN_POINT('',(4.928312301148E-02,-5.00001E-02));+#4262 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#4263 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4264 = ORIENTED_EDGE('',*,*,#4265,.T.);+#4265 = EDGE_CURVE('',#4239,#4266,#4268,.T.);+#4266 = VERTEX_POINT('',#4267);+#4267 = CARTESIAN_POINT('',(0.30016592764,7.534587350931E-02,1.75));+#4268 = SURFACE_CURVE('',#4269,(#4273,#4280),.PCURVE_S1.);+#4269 = LINE('',#4270,#4271);+#4270 = CARTESIAN_POINT('',(0.30016592764,1.167758577137,1.75));+#4271 = VECTOR('',#4272,1.);+#4272 = DIRECTION('',(0.,-1.,0.));+#4273 = PCURVE('',#2438,#4274);+#4274 = DEFINITIONAL_REPRESENTATION('',(#4275),#4279);+#4275 = LINE('',#4276,#4277);+#4276 = CARTESIAN_POINT('',(2.058093523243,-0.93755684483));+#4277 = VECTOR('',#4278,1.);+#4278 = DIRECTION('',(0.802556617983,0.596575959062));+#4279 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4280 = PCURVE('',#4281,#4286);+#4281 = PLANE('',#4282);+#4282 = AXIS2_PLACEMENT_3D('',#4283,#4284,#4285);+#4283 = CARTESIAN_POINT('',(0.30016592764,7.534587350931E-02,1.8000001)+ );+#4284 = DIRECTION('',(1.,0.,0.));+#4285 = DIRECTION('',(0.,1.,0.));+#4286 = DEFINITIONAL_REPRESENTATION('',(#4287),#4290);+#4287 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#4288,#4289),.UNSPECIFIED.,.F.,+ .F.,(2,2),(1.06605597221,1.092412703628),.PIECEWISE_BEZIER_KNOTS.);+#4288 = CARTESIAN_POINT('',(2.635673141771E-02,-5.00001E-02));+#4289 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#4290 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4291 = ORIENTED_EDGE('',*,*,#4292,.T.);+#4292 = EDGE_CURVE('',#4266,#4293,#4295,.T.);+#4293 = VERTEX_POINT('',#4294);+#4294 = CARTESIAN_POINT('',(0.34858209731,8.623234952967E-02,1.75));+#4295 = SURFACE_CURVE('',#4296,(#4300,#4307),.PCURVE_S1.);+#4296 = LINE('',#4297,#4298);+#4297 = CARTESIAN_POINT('',(-0.384291481091,-7.855579235922E-02,1.75));+#4298 = VECTOR('',#4299,1.);+#4299 = DIRECTION('',(0.97564065493,0.219374821819,0.));+#4300 = PCURVE('',#2438,#4301);+#4301 = DEFINITIONAL_REPRESENTATION('',(#4302),#4306);+#4302 = LINE('',#4303,#4304);+#4303 = CARTESIAN_POINT('',(2.650000533519,0.355280168551));+#4304 = VECTOR('',#4305,1.);+#4305 = DIRECTION('',(0.405983044346,-0.913880609108));+#4306 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4307 = PCURVE('',#4308,#4313);+#4308 = PLANE('',#4309);+#4309 = AXIS2_PLACEMENT_3D('',#4310,#4311,#4312);+#4310 = CARTESIAN_POINT('',(0.34858209731,8.623234952967E-02,1.8000001)+ );+#4311 = DIRECTION('',(-0.219374821819,0.97564065493,0.));+#4312 = DIRECTION('',(-0.97564065493,-0.219374821819,0.));+#4313 = DEFINITIONAL_REPRESENTATION('',(#4314),#4317);+#4314 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#4315,#4316),.UNSPECIFIED.,.F.,+ .F.,(2,2),(0.701546625054,0.751171627276),.PIECEWISE_BEZIER_KNOTS.);+#4315 = CARTESIAN_POINT('',(4.962500222273E-02,-5.00001E-02));+#4316 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#4317 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4318 = ORIENTED_EDGE('',*,*,#4319,.T.);+#4319 = EDGE_CURVE('',#4293,#4048,#4320,.T.);+#4320 = SURFACE_CURVE('',#4321,(#4325,#4332),.PCURVE_S1.);+#4321 = LINE('',#4322,#4323);+#4322 = CARTESIAN_POINT('',(0.34858209731,1.091481623442,1.75));+#4323 = VECTOR('',#4324,1.);+#4324 = DIRECTION('',(0.,-1.,0.));+#4325 = PCURVE('',#2438,#4326);+#4326 = DEFINITIONAL_REPRESENTATION('',(#4327),#4331);+#4327 = LINE('',#4328,#4329);+#4328 = CARTESIAN_POINT('',(2.148194020086,-0.93090856541));+#4329 = VECTOR('',#4330,1.);+#4330 = DIRECTION('',(0.802556617983,0.596575959062));+#4331 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4332 = PCURVE('',#4333,#4338);+#4333 = PLANE('',#4334);+#4334 = AXIS2_PLACEMENT_3D('',#4335,#4336,#4337);+#4335 = CARTESIAN_POINT('',(0.34858209731,-7.720803388121E-02,1.8000001)+ );+#4336 = DIRECTION('',(1.,0.,0.));+#4337 = DIRECTION('',(0.,1.,0.));+#4338 = DEFINITIONAL_REPRESENTATION('',(#4339),#4342);+#4339 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#4340,#4341),.UNSPECIFIED.,.F.,+ .F.,(2,2),(1.005249273912,1.168689657323),.PIECEWISE_BEZIER_KNOTS.);+#4340 = CARTESIAN_POINT('',(0.163440383411,-5.00001E-02));+#4341 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#4342 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4343 = FACE_BOUND('',#4344,.F.);+#4344 = EDGE_LOOP('',(#4345,#4383,#4410,#4437,#4464,#4500,#4536));+#4345 = ORIENTED_EDGE('',*,*,#4346,.T.);+#4346 = EDGE_CURVE('',#4347,#4349,#4351,.T.);+#4347 = VERTEX_POINT('',#4348);+#4348 = CARTESIAN_POINT('',(0.223530866181,8.623234952967E-02,1.75));+#4349 = VERTEX_POINT('',#4350);+#4350 = CARTESIAN_POINT('',(0.151336340994,0.112302594736,1.75));+#4351 = SURFACE_CURVE('',#4352,(#4358,#4367),.PCURVE_S1.);+#4352 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#4353,#4354,#4355,#4356,#4357),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#4353 = CARTESIAN_POINT('',(0.223530866181,8.623234952967E-02,1.75));+#4354 = CARTESIAN_POINT('',(0.211919712492,9.92769789828E-02,1.75));+#4355 = CARTESIAN_POINT('',(0.196003692611,0.107971623099,1.75));+#4356 = CARTESIAN_POINT('',(0.175791322115,0.112302594736,1.75));+#4357 = CARTESIAN_POINT('',(0.151336340994,0.112302594736,1.75));+#4358 = PCURVE('',#2438,#4359);+#4359 = DEFINITIONAL_REPRESENTATION('',(#4360),#4366);+#4360 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#4361,#4362,#4363,#4364,#4365),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#4361 = CARTESIAN_POINT('',(2.880360919444,-0.2308403226));+#4362 = CARTESIAN_POINT('',(2.8629649306,-0.229303826691));+#4363 = CARTESIAN_POINT('',(2.846491871598,-0.221717335256));+#4364 = CARTESIAN_POINT('',(2.830957807335,-0.208079517108));+#4365 = CARTESIAN_POINT('',(2.816368553518,-0.188453010166));+#4366 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4367 = PCURVE('',#4368,#4375);+#4368 = SURFACE_OF_LINEAR_EXTRUSION('',#4369,#4373);+#4369 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#4370,#4371,#4372),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#4370 = CARTESIAN_POINT('',(0.151336340994,0.112302594736,1.8000001));+#4371 = CARTESIAN_POINT('',(0.200325483085,0.112302594736,1.8000001));+#4372 = CARTESIAN_POINT('',(0.223530866181,8.623234952967E-02,1.8000001)+ );+#4373 = VECTOR('',#4374,1.);+#4374 = DIRECTION('',(0.,0.,1.));+#4375 = DEFINITIONAL_REPRESENTATION('',(#4376),#4382);+#4376 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#4377,#4378,#4379,#4380,#4381),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#4377 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#4378 = CARTESIAN_POINT('',(0.749817668577,-5.00001E-02));+#4379 = CARTESIAN_POINT('',(0.499607954637,-5.00001E-02));+#4380 = CARTESIAN_POINT('',(0.249595931644,-5.00001E-02));+#4381 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#4382 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4383 = ORIENTED_EDGE('',*,*,#4384,.T.);+#4384 = EDGE_CURVE('',#4349,#4385,#4387,.T.);+#4385 = VERTEX_POINT('',#4386);+#4386 = CARTESIAN_POINT('',(0.107933680018,0.112302594736,1.75));+#4387 = SURFACE_CURVE('',#4388,(#4392,#4399),.PCURVE_S1.);+#4388 = LINE('',#4389,#4390);+#4389 = CARTESIAN_POINT('',(-0.786075980182,0.112302594736,1.75));+#4390 = VECTOR('',#4391,1.);+#4391 = DIRECTION('',(-1.,-0.,-0.));+#4392 = PCURVE('',#2438,#4393);+#4393 = DEFINITIONAL_REPRESENTATION('',(#4394),#4398);+#4394 = LINE('',#4395,#4396);+#4395 = CARTESIAN_POINT('',(2.257130898976,0.563873451973));+#4396 = VECTOR('',#4397,1.);+#4397 = DIRECTION('',(-0.596575959062,0.802556617983));+#4398 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4399 = PCURVE('',#4400,#4405);+#4400 = PLANE('',#4401);+#4401 = AXIS2_PLACEMENT_3D('',#4402,#4403,#4404);+#4402 = CARTESIAN_POINT('',(0.107933680018,0.112302594736,1.8000001));+#4403 = DIRECTION('',(0.,-1.,0.));+#4404 = DIRECTION('',(1.,0.,0.));+#4405 = DEFINITIONAL_REPRESENTATION('',(#4406),#4409);+#4406 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#4407,#4408),.UNSPECIFIED.,.F.,+ .F.,(2,2),(-0.937412321176,-0.8940096602),.PIECEWISE_BEZIER_KNOTS.);+#4407 = CARTESIAN_POINT('',(4.340266097589E-02,-5.00001E-02));+#4408 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#4409 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4410 = ORIENTED_EDGE('',*,*,#4411,.T.);+#4411 = EDGE_CURVE('',#4385,#4412,#4414,.T.);+#4412 = VERTEX_POINT('',#4413);+#4413 = CARTESIAN_POINT('',(0.107933680018,-0.101559361821,1.75));+#4414 = SURFACE_CURVE('',#4415,(#4419,#4426),.PCURVE_S1.);+#4415 = LINE('',#4416,#4417);+#4416 = CARTESIAN_POINT('',(0.107933680018,1.079305959472,1.75));+#4417 = VECTOR('',#4418,1.);+#4418 = DIRECTION('',(0.,-1.,0.));+#4419 = PCURVE('',#2438,#4420);+#4420 = DEFINITIONAL_REPRESENTATION('',(#4421),#4425);+#4421 = LINE('',#4422,#4423);+#4422 = CARTESIAN_POINT('',(2.01440061944,-0.730510877095));+#4423 = VECTOR('',#4424,1.);+#4424 = DIRECTION('',(0.802556617983,0.596575959062));+#4425 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4426 = PCURVE('',#4427,#4432);+#4427 = PLANE('',#4428);+#4428 = AXIS2_PLACEMENT_3D('',#4429,#4430,#4431);+#4429 = CARTESIAN_POINT('',(0.107933680018,-0.101559361821,1.8000001));+#4430 = DIRECTION('',(1.,0.,0.));+#4431 = DIRECTION('',(0.,1.,0.));+#4432 = DEFINITIONAL_REPRESENTATION('',(#4433),#4436);+#4433 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#4434,#4435),.UNSPECIFIED.,.F.,+ .F.,(2,2),(0.967003364735,1.180865321293),.PIECEWISE_BEZIER_KNOTS.);+#4434 = CARTESIAN_POINT('',(0.213861956558,-5.00001E-02));+#4435 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#4436 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4437 = ORIENTED_EDGE('',*,*,#4438,.T.);+#4438 = EDGE_CURVE('',#4412,#4439,#4441,.T.);+#4439 = VERTEX_POINT('',#4440);+#4440 = CARTESIAN_POINT('',(0.151336340994,-0.101559361821,1.75));+#4441 = SURFACE_CURVE('',#4442,(#4446,#4453),.PCURVE_S1.);+#4442 = LINE('',#4443,#4444);+#4443 = CARTESIAN_POINT('',(-0.764374649694,-0.101559361821,1.75));+#4444 = VECTOR('',#4445,1.);+#4445 = DIRECTION('',(1.,-0.,0.));+#4446 = PCURVE('',#2438,#4447);+#4447 = DEFINITIONAL_REPRESENTATION('',(#4448),#4452);+#4448 = LINE('',#4449,#4450);+#4449 = CARTESIAN_POINT('',(2.441713719595,0.674041807411));+#4450 = VECTOR('',#4451,1.);+#4451 = DIRECTION('',(0.596575959062,-0.802556617983));+#4452 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4453 = PCURVE('',#4454,#4459);+#4454 = PLANE('',#4455);+#4455 = AXIS2_PLACEMENT_3D('',#4456,#4457,#4458);+#4456 = CARTESIAN_POINT('',(0.151336340994,-0.101559361821,1.8000001));+#4457 = DIRECTION('',(0.,1.,0.));+#4458 = DIRECTION('',(-1.,0.,0.));+#4459 = DEFINITIONAL_REPRESENTATION('',(#4460),#4463);+#4460 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#4461,#4462),.UNSPECIFIED.,.F.,+ .F.,(2,2),(0.872308329712,0.915710990688),.PIECEWISE_BEZIER_KNOTS.);+#4461 = CARTESIAN_POINT('',(4.340266097589E-02,-5.00001E-02));+#4462 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#4463 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4464 = ORIENTED_EDGE('',*,*,#4465,.T.);+#4465 = EDGE_CURVE('',#4439,#4466,#4468,.T.);+#4466 = VERTEX_POINT('',#4467);+#4467 = CARTESIAN_POINT('',(0.223530866181,-7.556073816761E-02,1.75));+#4468 = SURFACE_CURVE('',#4469,(#4475,#4484),.PCURVE_S1.);+#4469 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#4470,#4471,#4472,#4473,#4474),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#4470 = CARTESIAN_POINT('',(0.151336340994,-0.101559361821,1.75));+#4471 = CARTESIAN_POINT('',(0.175791261704,-0.101559361821,1.75));+#4472 = CARTESIAN_POINT('',(0.196003592542,-9.724030980872E-02,1.75));+#4473 = CARTESIAN_POINT('',(0.211919654996,-8.856959514391E-02,1.75));+#4474 = CARTESIAN_POINT('',(0.223530866181,-7.556073816761E-02,1.75));+#4475 = PCURVE('',#2438,#4476);+#4476 = DEFINITIONAL_REPRESENTATION('',(#4477),#4483);+#4477 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#4478,#4479,#4480,#4481,#4482),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#4478 = CARTESIAN_POINT('',(2.988004882089,-6.086810832534E-02));+#4479 = CARTESIAN_POINT('',(3.002594099865,-8.049456678361E-02));+#4480 = CARTESIAN_POINT('',(3.011186006744,-9.929274925944E-02));+#4481 = CARTESIAN_POINT('',(3.01372240753,-0.117239030431));+#4482 = CARTESIAN_POINT('',(3.01020903272,-0.134318456137));+#4483 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4484 = PCURVE('',#4485,#4492);+#4485 = SURFACE_OF_LINEAR_EXTRUSION('',#4486,#4490);+#4486 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#4487,#4488,#4489),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#4487 = CARTESIAN_POINT('',(0.223530866181,-7.556073816761E-02,1.8000001+ ));+#4488 = CARTESIAN_POINT('',(0.200325483085,-0.101559361821,1.8000001));+#4489 = CARTESIAN_POINT('',(0.151336340994,-0.101559361821,1.8000001));+#4490 = VECTOR('',#4491,1.);+#4491 = DIRECTION('',(0.,0.,1.));+#4492 = DEFINITIONAL_REPRESENTATION('',(#4493),#4499);+#4493 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#4494,#4495,#4496,#4497,#4498),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#4494 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#4495 = CARTESIAN_POINT('',(0.750404684935,-5.00001E-02));+#4496 = CARTESIAN_POINT('',(0.500393282812,-5.00001E-02));+#4497 = CARTESIAN_POINT('',(0.250183570282,-5.00001E-02));+#4498 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#4499 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4500 = ORIENTED_EDGE('',*,*,#4501,.T.);+#4501 = EDGE_CURVE('',#4466,#4502,#4504,.T.);+#4502 = VERTEX_POINT('',#4503);+#4503 = CARTESIAN_POINT('',(0.246736249277,5.156751799116E-03,1.75));+#4504 = SURFACE_CURVE('',#4505,(#4511,#4520),.PCURVE_S1.);+#4505 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#4506,#4507,#4508,#4509,#4510),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#4506 = CARTESIAN_POINT('',(0.223530866181,-7.556073816761E-02,1.75));+#4507 = CARTESIAN_POINT('',(0.235148841219,-6.254430317187E-02,1.75));+#4508 = CARTESIAN_POINT('',(0.242885815531,-4.473206901053E-02,1.75));+#4509 = CARTESIAN_POINT('',(0.246736249277,-2.214218951376E-02,1.75));+#4510 = CARTESIAN_POINT('',(0.246736249277,5.156751799116E-03,1.75));+#4511 = PCURVE('',#2438,#4512);+#4512 = DEFINITIONAL_REPRESENTATION('',(#4513),#4519);+#4513 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#4514,#4515,#4516,#4517,#4518),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#4514 = CARTESIAN_POINT('',(3.01020903272,-0.134318456137));+#4515 = CARTESIAN_POINT('',(3.006693611272,-0.151407831083));+#4516 = CARTESIAN_POINT('',(2.997013977735,-0.168243541698));+#4517 = CARTESIAN_POINT('',(2.98118139665,-0.184810311809));+#4518 = CARTESIAN_POINT('',(2.959272450636,-0.201096203904));+#4519 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4520 = PCURVE('',#4521,#4528);+#4521 = SURFACE_OF_LINEAR_EXTRUSION('',#4522,#4526);+#4522 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#4523,#4524,#4525),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#4523 = CARTESIAN_POINT('',(0.246736249277,5.156751799116E-03,1.8000001)+ );+#4524 = CARTESIAN_POINT('',(0.246736249277,-4.956211451373E-02,1.8000001+ ));+#4525 = CARTESIAN_POINT('',(0.223530866181,-7.556073816761E-02,1.8000001+ ));+#4526 = VECTOR('',#4527,1.);+#4527 = DIRECTION('',(0.,0.,1.));+#4528 = DEFINITIONAL_REPRESENTATION('',(#4529),#4535);+#4529 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#4530,#4531,#4532,#4533,#4534),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#4530 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#4531 = CARTESIAN_POINT('',(0.74967069086,-5.00001E-02));+#4532 = CARTESIAN_POINT('',(0.499410262458,-5.00001E-02));+#4533 = CARTESIAN_POINT('',(0.24944724875,-5.00001E-02));+#4534 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#4535 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4536 = ORIENTED_EDGE('',*,*,#4537,.T.);+#4537 = EDGE_CURVE('',#4502,#4347,#4538,.T.);+#4538 = SURFACE_CURVE('',#4539,(#4545,#4554),.PCURVE_S1.);+#4539 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#4540,#4541,#4542,#4543,#4544),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#4540 = CARTESIAN_POINT('',(0.246736249277,5.156751799116E-03,1.75));+#4541 = CARTESIAN_POINT('',(0.246736249277,3.259775947795E-02,1.75));+#4542 = CARTESIAN_POINT('',(0.242886057996,5.529536428702E-02,1.75));+#4543 = CARTESIAN_POINT('',(0.235149112609,7.317975169119E-02,1.75));+#4544 = CARTESIAN_POINT('',(0.223530866181,8.623234952967E-02,1.75));+#4545 = PCURVE('',#2438,#4546);+#4546 = DEFINITIONAL_REPRESENTATION('',(#4547),#4553);+#4547 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#4548,#4549,#4550,#4551,#4552),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#4548 = CARTESIAN_POINT('',(2.959272450636,-0.201096203904));+#4549 = CARTESIAN_POINT('',(2.937249488319,-0.217466849378));+#4550 = CARTESIAN_POINT('',(2.916736443811,-0.227917698242));+#4551 = CARTESIAN_POINT('',(2.897767534727,-0.232377757086));+#4552 = CARTESIAN_POINT('',(2.880360919444,-0.2308403226));+#4553 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4554 = PCURVE('',#4555,#4562);+#4555 = SURFACE_OF_LINEAR_EXTRUSION('',#4556,#4560);+#4556 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#4557,#4558,#4559),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#4557 = CARTESIAN_POINT('',(0.223530866181,8.623234952967E-02,1.8000001)+ );+#4558 = CARTESIAN_POINT('',(0.246736249277,6.016210432302E-02,1.8000001)+ );+#4559 = CARTESIAN_POINT('',(0.246736249277,5.156751799116E-03,1.8000001)+ );+#4560 = VECTOR('',#4561,1.);+#4561 = DIRECTION('',(0.,0.,1.));+#4562 = DEFINITIONAL_REPRESENTATION('',(#4563),#4569);+#4563 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#4564,#4565,#4566,#4567,#4568),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#4564 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#4565 = CARTESIAN_POINT('',(0.750560568929,-5.00001E-02));+#4566 = CARTESIAN_POINT('',(0.500598889367,-5.00001E-02));+#4567 = CARTESIAN_POINT('',(0.250335156709,-5.00001E-02));+#4568 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#4569 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4570 = FACE_BOUND('',#4571,.F.);+#4571 = EDGE_LOOP('',(#4572,#4601,#4628,#4655,#4682,#4709,#4736));+#4572 = ORIENTED_EDGE('',*,*,#4573,.T.);+#4573 = EDGE_CURVE('',#4574,#4576,#4578,.T.);+#4574 = VERTEX_POINT('',#4575);+#4575 = CARTESIAN_POINT('',(5.020670848862E-02,0.112302594736,1.75));+#4576 = VERTEX_POINT('',#4577);+#4577 = CARTESIAN_POINT('',(-7.162155276552E-05,-7.720803388121E-02,1.75+ ));+#4578 = SURFACE_CURVE('',#4579,(#4583,#4590),.PCURVE_S1.);+#4579 = LINE('',#4580,#4581);+#4580 = CARTESIAN_POINT('',(0.234361890947,0.806425974771,1.75));+#4581 = VECTOR('',#4582,1.);+#4582 = DIRECTION('',(-0.256434699025,-0.966561557862,-0.));+#4583 = PCURVE('',#2438,#4584);+#4584 = DEFINITIONAL_REPRESENTATION('',(#4585),#4589);+#4585 = LINE('',#4586,#4587);+#4586 = CARTESIAN_POINT('',(2.308826288265,-0.669183035894));+#4587 = VECTOR('',#4588,1.);+#4588 = DIRECTION('',(0.622737598443,0.782430753157));+#4589 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4590 = PCURVE('',#4591,#4596);+#4591 = PLANE('',#4592);+#4592 = AXIS2_PLACEMENT_3D('',#4593,#4594,#4595);+#4593 = CARTESIAN_POINT('',(-7.162155276551E-05,-7.720803388121E-02,+ 1.8000001));+#4594 = DIRECTION('',(0.966561557862,-0.256434699025,0.));+#4595 = DIRECTION('',(0.256434699025,0.966561557862,0.));+#4596 = DEFINITIONAL_REPRESENTATION('',(#4597),#4600);+#4597 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#4598,#4599),.UNSPECIFIED.,.F.,+ .F.,(2,2),(0.718136754342,0.914203551201),.PIECEWISE_BEZIER_KNOTS.);+#4598 = CARTESIAN_POINT('',(0.19606679686,-5.00001E-02));+#4599 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#4600 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4601 = ORIENTED_EDGE('',*,*,#4602,.T.);+#4602 = EDGE_CURVE('',#4576,#4603,#4605,.T.);+#4603 = VERTEX_POINT('',#4604);+#4604 = CARTESIAN_POINT('',(-5.020670848862E-02,0.112302594736,1.75));+#4605 = SURFACE_CURVE('',#4606,(#4610,#4617),.PCURVE_S1.);+#4606 = LINE('',#4607,#4608);+#4607 = CARTESIAN_POINT('',(-0.369037409055,1.317482642878,1.75));+#4608 = VECTOR('',#4609,1.);+#4609 = DIRECTION('',(-0.255751966392,0.966742432961,0.));+#4610 = PCURVE('',#2438,#4611);+#4611 = DEFINITIONAL_REPRESENTATION('',(#4612),#4616);+#4612 = LINE('',#4613,#4614);+#4613 = CARTESIAN_POINT('',(1.538700861015,-0.489805056302));+#4614 = VECTOR('',#4615,1.);+#4615 = DIRECTION('',(-0.92844101209,-0.37147986092));+#4616 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4617 = PCURVE('',#4618,#4623);+#4618 = PLANE('',#4619);+#4619 = AXIS2_PLACEMENT_3D('',#4620,#4621,#4622);+#4620 = CARTESIAN_POINT('',(-5.020670848862E-02,0.112302594736,1.8000001+ ));+#4621 = DIRECTION('',(-0.966742432961,-0.255751966392,0.));+#4622 = DIRECTION('',(0.255751966392,-0.966742432961,0.));+#4623 = DEFINITIONAL_REPRESENTATION('',(#4624),#4627);+#4624 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#4625,#4626),.UNSPECIFIED.,.F.,+ .F.,(2,2),(-1.442670383762,-1.246640270512),.PIECEWISE_BEZIER_KNOTS.);+#4625 = CARTESIAN_POINT('',(0.196030113251,-5.00001E-02));+#4626 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#4627 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4628 = ORIENTED_EDGE('',*,*,#4629,.T.);+#4629 = EDGE_CURVE('',#4603,#4630,#4632,.T.);+#4630 = VERTEX_POINT('',#4631);+#4631 = CARTESIAN_POINT('',(-8.01445175446E-02,0.112302594736,1.75));+#4632 = SURFACE_CURVE('',#4633,(#4637,#4644),.PCURVE_S1.);+#4633 = LINE('',#4634,#4635);+#4634 = CARTESIAN_POINT('',(-0.880115078963,0.112302594736,1.75));+#4635 = VECTOR('',#4636,1.);+#4636 = DIRECTION('',(-1.,-0.,-0.));+#4637 = PCURVE('',#2438,#4638);+#4638 = DEFINITIONAL_REPRESENTATION('',(#4639),#4643);+#4639 = LINE('',#4640,#4641);+#4640 = CARTESIAN_POINT('',(2.201029433432,0.639345153049));+#4641 = VECTOR('',#4642,1.);+#4642 = DIRECTION('',(-0.596575959062,0.802556617983));+#4643 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4644 = PCURVE('',#4645,#4650);+#4645 = PLANE('',#4646);+#4646 = AXIS2_PLACEMENT_3D('',#4647,#4648,#4649);+#4647 = CARTESIAN_POINT('',(-8.01445175446E-02,0.112302594736,1.8000001)+ );+#4648 = DIRECTION('',(0.,-1.,0.));+#4649 = DIRECTION('',(1.,0.,0.));+#4650 = DEFINITIONAL_REPRESENTATION('',(#4651),#4654);+#4651 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#4652,#4653),.UNSPECIFIED.,.F.,+ .F.,(2,2),(-0.829908370475,-0.799970561419),.PIECEWISE_BEZIER_KNOTS.);+#4652 = CARTESIAN_POINT('',(2.993780905598E-02,-5.00001E-02));+#4653 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#4654 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4655 = ORIENTED_EDGE('',*,*,#4656,.T.);+#4656 = EDGE_CURVE('',#4630,#4657,#4659,.T.);+#4657 = VERTEX_POINT('',#4658);+#4658 = CARTESIAN_POINT('',(-1.754728042755E-02,-0.101559361821,1.75));+#4659 = SURFACE_CURVE('',#4660,(#4664,#4671),.PCURVE_S1.);+#4660 = LINE('',#4661,#4662);+#4661 = CARTESIAN_POINT('',(-0.40150789358,1.210232847417,1.75));+#4662 = VECTOR('',#4663,1.);+#4663 = DIRECTION('',(0.280913194718,-0.959733180125,0.));+#4664 = PCURVE('',#2438,#4665);+#4665 = DEFINITIONAL_REPRESENTATION('',(#4666),#4670);+#4666 = LINE('',#4667,#4668);+#4667 = CARTESIAN_POINT('',(1.605403783692,-0.399763004471));+#4668 = VECTOR('',#4669,1.);+#4669 = DIRECTION('',(0.93782627376,0.347104998877));+#4670 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4671 = PCURVE('',#4672,#4677);+#4672 = PLANE('',#4673);+#4673 = AXIS2_PLACEMENT_3D('',#4674,#4675,#4676);+#4674 = CARTESIAN_POINT('',(-1.754728042755E-02,-0.101559361821,+ 1.8000001));+#4675 = DIRECTION('',(0.959733180125,0.280913194718,0.));+#4676 = DIRECTION('',(-0.280913194718,0.959733180125,0.));+#4677 = DEFINITIONAL_REPRESENTATION('',(#4678),#4681);+#4678 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#4679,#4680),.UNSPECIFIED.,.F.,+ .F.,(2,2),(1.143995305589,1.366830111123),.PIECEWISE_BEZIER_KNOTS.);+#4679 = CARTESIAN_POINT('',(0.222834805534,-5.00001E-02));+#4680 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#4681 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4682 = ORIENTED_EDGE('',*,*,#4683,.T.);+#4683 = EDGE_CURVE('',#4657,#4684,#4686,.T.);+#4684 = VERTEX_POINT('',#4685);+#4685 = CARTESIAN_POINT('',(1.754728042755E-02,-0.101559361821,1.75));+#4686 = SURFACE_CURVE('',#4687,(#4691,#4698),.PCURVE_S1.);+#4687 = LINE('',#4688,#4689);+#4688 = CARTESIAN_POINT('',(-0.831269179977,-0.101559361821,1.75));+#4689 = VECTOR('',#4690,1.);+#4690 = DIRECTION('',(1.,-0.,0.));+#4691 = PCURVE('',#2438,#4692);+#4692 = DEFINITIONAL_REPRESENTATION('',(#4693),#4697);+#4693 = LINE('',#4694,#4695);+#4694 = CARTESIAN_POINT('',(2.401806051036,0.727728455397));+#4695 = VECTOR('',#4696,1.);+#4696 = DIRECTION('',(0.596575959062,-0.802556617983));+#4697 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4698 = PCURVE('',#4699,#4704);+#4699 = PLANE('',#4700);+#4700 = AXIS2_PLACEMENT_3D('',#4701,#4702,#4703);+#4701 = CARTESIAN_POINT('',(1.754728042755E-02,-0.101559361821,1.8000001+ ));+#4702 = DIRECTION('',(0.,1.,0.));+#4703 = DIRECTION('',(-1.,0.,0.));+#4704 = DEFINITIONAL_REPRESENTATION('',(#4705),#4708);+#4705 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#4706,#4707),.UNSPECIFIED.,.F.,+ .F.,(2,2),(0.81372189955,0.848816460405),.PIECEWISE_BEZIER_KNOTS.);+#4706 = CARTESIAN_POINT('',(3.50945608551E-02,-5.00001E-02));+#4707 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#4708 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4709 = ORIENTED_EDGE('',*,*,#4710,.T.);+#4710 = EDGE_CURVE('',#4684,#4711,#4713,.T.);+#4711 = VERTEX_POINT('',#4712);+#4712 = CARTESIAN_POINT('',(8.01445175446E-02,0.112302594736,1.75));+#4713 = SURFACE_CURVE('',#4714,(#4718,#4725),.PCURVE_S1.);+#4714 = LINE('',#4715,#4716);+#4715 = CARTESIAN_POINT('',(0.300227219482,0.864209857876,1.75));+#4716 = VECTOR('',#4717,1.);+#4717 = DIRECTION('',(0.280913194718,0.959733180125,0.));+#4718 = PCURVE('',#2438,#4719);+#4719 = DEFINITIONAL_REPRESENTATION('',(#4720),#4724);+#4720 = LINE('',#4721,#4722);+#4721 = CARTESIAN_POINT('',(2.301745122006,-0.756516166687));+#4722 = VECTOR('',#4723,1.);+#4723 = DIRECTION('',(-0.602654156655,-0.798002485877));+#4724 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4725 = PCURVE('',#4726,#4731);+#4726 = PLANE('',#4727);+#4727 = AXIS2_PLACEMENT_3D('',#4728,#4729,#4730);+#4728 = CARTESIAN_POINT('',(8.01445175446E-02,0.112302594736,1.8000001)+ );+#4729 = DIRECTION('',(-0.959733180125,0.280913194718,0.));+#4730 = DIRECTION('',(-0.280913194718,-0.959733180125,0.));+#4731 = DEFINITIONAL_REPRESENTATION('',(#4732),#4735);+#4732 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#4733,#4734),.UNSPECIFIED.,.F.,+ .F.,(2,2),(-1.006289289249,-0.783454483715),.PIECEWISE_BEZIER_KNOTS.);+#4733 = CARTESIAN_POINT('',(0.222834805534,-5.00001E-02));+#4734 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#4735 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4736 = ORIENTED_EDGE('',*,*,#4737,.T.);+#4737 = EDGE_CURVE('',#4711,#4574,#4738,.T.);+#4738 = SURFACE_CURVE('',#4739,(#4743,#4750),.PCURVE_S1.);+#4739 = LINE('',#4740,#4741);+#4740 = CARTESIAN_POINT('',(-0.814939465947,0.112302594736,1.75));+#4741 = VECTOR('',#4742,1.);+#4742 = DIRECTION('',(-1.,-0.,-0.));+#4743 = PCURVE('',#2438,#4744);+#4744 = DEFINITIONAL_REPRESENTATION('',(#4745),#4749);+#4745 = LINE('',#4746,#4747);+#4746 = CARTESIAN_POINT('',(2.239911637274,0.587038033491));+#4747 = VECTOR('',#4748,1.);+#4748 = DIRECTION('',(-0.596575959062,0.802556617983));+#4749 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4750 = PCURVE('',#4751,#4756);+#4751 = PLANE('',#4752);+#4752 = AXIS2_PLACEMENT_3D('',#4753,#4754,#4755);+#4753 = CARTESIAN_POINT('',(5.020670848862E-02,0.112302594736,1.8000001)+ );+#4754 = DIRECTION('',(0.,-1.,0.));+#4755 = DIRECTION('',(1.,0.,0.));+#4756 = DEFINITIONAL_REPRESENTATION('',(#4757),#4760);+#4757 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#4758,#4759),.UNSPECIFIED.,.F.,+ .F.,(2,2),(-0.895083983491,-0.865146174435),.PIECEWISE_BEZIER_KNOTS.);+#4758 = CARTESIAN_POINT('',(2.993780905598E-02,-5.00001E-02));+#4759 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#4760 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4761 = FACE_BOUND('',#4762,.F.);+#4762 = EDGE_LOOP('',(#4763,#4792,#4819,#4846,#4873,#4900,#4927,#4954,+ #4981,#5008,#5035,#5062));+#4763 = ORIENTED_EDGE('',*,*,#4764,.T.);+#4764 = EDGE_CURVE('',#4765,#4767,#4769,.T.);+#4765 = VERTEX_POINT('',#4766);+#4766 = CARTESIAN_POINT('',(-0.216225467799,0.112302594736,1.75));+#4767 = VERTEX_POINT('',#4768);+#4768 = CARTESIAN_POINT('',(-0.245303818222,0.112302594736,1.75));+#4769 = SURFACE_CURVE('',#4770,(#4774,#4781),.PCURVE_S1.);+#4770 = LINE('',#4771,#4772);+#4771 = CARTESIAN_POINT('',(-0.962694729302,0.112302594736,1.75));+#4772 = VECTOR('',#4773,1.);+#4773 = DIRECTION('',(-1.,-0.,-0.));+#4774 = PCURVE('',#2438,#4775);+#4775 = DEFINITIONAL_REPRESENTATION('',(#4776),#4780);+#4776 = LINE('',#4777,#4778);+#4777 = CARTESIAN_POINT('',(2.151764399332,0.705619997939));+#4778 = VECTOR('',#4779,1.);+#4779 = DIRECTION('',(-0.596575959062,0.802556617983));+#4780 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4781 = PCURVE('',#4782,#4787);+#4782 = PLANE('',#4783);+#4783 = AXIS2_PLACEMENT_3D('',#4784,#4785,#4786);+#4784 = CARTESIAN_POINT('',(-0.245303818222,0.112302594736,1.8000001));+#4785 = DIRECTION('',(0.,-1.,0.));+#4786 = DIRECTION('',(1.,0.,0.));+#4787 = DEFINITIONAL_REPRESENTATION('',(#4788),#4791);+#4788 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#4789,#4790),.UNSPECIFIED.,.F.,+ .F.,(2,2),(-0.746469261503,-0.71739091108),.PIECEWISE_BEZIER_KNOTS.);+#4789 = CARTESIAN_POINT('',(2.907835042279E-02,-5.00001E-02));+#4790 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#4791 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4792 = ORIENTED_EDGE('',*,*,#4793,.T.);+#4793 = EDGE_CURVE('',#4767,#4794,#4796,.T.);+#4794 = VERTEX_POINT('',#4795);+#4795 = CARTESIAN_POINT('',(-0.245303818222,-0.101559361821,1.75));+#4796 = SURFACE_CURVE('',#4797,(#4801,#4808),.PCURVE_S1.);+#4797 = LINE('',#4798,#4799);+#4798 = CARTESIAN_POINT('',(-0.245303818222,1.079305959472,1.75));+#4799 = VECTOR('',#4800,1.);+#4800 = DIRECTION('',(0.,-1.,0.));+#4801 = PCURVE('',#2438,#4802);+#4802 = DEFINITIONAL_REPRESENTATION('',(#4803),#4807);+#4803 = LINE('',#4804,#4805);+#4804 = CARTESIAN_POINT('',(1.803667620151,-0.447017785163));+#4805 = VECTOR('',#4806,1.);+#4806 = DIRECTION('',(0.802556617983,0.596575959062));+#4807 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4808 = PCURVE('',#4809,#4814);+#4809 = PLANE('',#4810);+#4810 = AXIS2_PLACEMENT_3D('',#4811,#4812,#4813);+#4811 = CARTESIAN_POINT('',(-0.245303818222,-0.101559361821,1.8000001));+#4812 = DIRECTION('',(1.,0.,0.));+#4813 = DIRECTION('',(0.,1.,0.));+#4814 = DEFINITIONAL_REPRESENTATION('',(#4815),#4818);+#4815 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#4816,#4817),.UNSPECIFIED.,.F.,+ .F.,(2,2),(0.967003364735,1.180865321293),.PIECEWISE_BEZIER_KNOTS.);+#4816 = CARTESIAN_POINT('',(0.213861956558,-5.00001E-02));+#4817 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#4818 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4819 = ORIENTED_EDGE('',*,*,#4820,.T.);+#4820 = EDGE_CURVE('',#4794,#4821,#4823,.T.);+#4821 = VERTEX_POINT('',#4822);+#4822 = CARTESIAN_POINT('',(-0.216225467799,-0.101559361821,1.75));+#4823 = SURFACE_CURVE('',#4824,(#4828,#4835),.PCURVE_S1.);+#4824 = LINE('',#4825,#4826);+#4825 = CARTESIAN_POINT('',(-0.948155554091,-0.101559361821,1.75));+#4826 = VECTOR('',#4827,1.);+#4827 = DIRECTION('',(1.,-0.,0.));+#4828 = PCURVE('',#2438,#4829);+#4829 = DEFINITIONAL_REPRESENTATION('',(#4830),#4834);+#4830 = LINE('',#4831,#4832);+#4831 = CARTESIAN_POINT('',(2.332074450298,0.821536388493));+#4832 = VECTOR('',#4833,1.);+#4833 = DIRECTION('',(0.596575959062,-0.802556617983));+#4834 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4835 = PCURVE('',#4836,#4841);+#4836 = PLANE('',#4837);+#4837 = AXIS2_PLACEMENT_3D('',#4838,#4839,#4840);+#4838 = CARTESIAN_POINT('',(-0.216225467799,-0.101559361821,1.8000001));+#4839 = DIRECTION('',(0.,1.,0.));+#4840 = DIRECTION('',(-1.,0.,0.));+#4841 = DEFINITIONAL_REPRESENTATION('',(#4842),#4845);+#4842 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#4843,#4844),.UNSPECIFIED.,.F.,+ .F.,(2,2),(0.702851735869,0.731930086291),.PIECEWISE_BEZIER_KNOTS.);+#4843 = CARTESIAN_POINT('',(2.907835042279E-02,-5.00001E-02));+#4844 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#4845 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4846 = ORIENTED_EDGE('',*,*,#4847,.T.);+#4847 = EDGE_CURVE('',#4821,#4848,#4850,.T.);+#4848 = VERTEX_POINT('',#4849);+#4849 = CARTESIAN_POINT('',(-0.216225467799,2.86486211062E-04,1.75));+#4850 = SURFACE_CURVE('',#4851,(#4855,#4862),.PCURVE_S1.);+#4851 = LINE('',#4852,#4853);+#4852 = CARTESIAN_POINT('',(-0.216225467799,1.130228883488,1.75));+#4853 = VECTOR('',#4854,1.);+#4854 = DIRECTION('',(0.,1.,0.));+#4855 = PCURVE('',#2438,#4856);+#4856 = DEFINITIONAL_REPRESENTATION('',(#4857),#4861);+#4857 = LINE('',#4858,#4859);+#4858 = CARTESIAN_POINT('',(1.780146535266,-0.500734199968));+#4859 = VECTOR('',#4860,1.);+#4860 = DIRECTION('',(-0.802556617983,-0.596575959062));+#4861 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4862 = PCURVE('',#4863,#4868);+#4863 = PLANE('',#4864);+#4864 = AXIS2_PLACEMENT_3D('',#4865,#4866,#4867);+#4865 = CARTESIAN_POINT('',(-0.216225467799,2.86486211062E-04,1.8000001)+ );+#4866 = DIRECTION('',(-1.,0.,0.));+#4867 = DIRECTION('',(0.,-1.,0.));+#4868 = DEFINITIONAL_REPRESENTATION('',(#4869),#4872);+#4869 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#4870,#4871),.UNSPECIFIED.,.F.,+ .F.,(2,2),(-1.23178824531,-1.129942397277),.PIECEWISE_BEZIER_KNOTS.);+#4870 = CARTESIAN_POINT('',(0.101845848033,-5.00001E-02));+#4871 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#4872 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4873 = ORIENTED_EDGE('',*,*,#4874,.T.);+#4874 = EDGE_CURVE('',#4848,#4875,#4877,.T.);+#4875 = VERTEX_POINT('',#4876);+#4876 = CARTESIAN_POINT('',(-0.13701203044,2.86486211062E-04,1.75));+#4877 = SURFACE_CURVE('',#4878,(#4882,#4889),.PCURVE_S1.);+#4878 = LINE('',#4879,#4880);+#4879 = CARTESIAN_POINT('',(-0.908548835411,2.86486211062E-04,1.75));+#4880 = VECTOR('',#4881,1.);+#4881 = DIRECTION('',(1.,-0.,0.));+#4882 = PCURVE('',#2438,#4883);+#4883 = DEFINITIONAL_REPRESENTATION('',(#4884),#4888);+#4884 = LINE('',#4885,#4886);+#4885 = CARTESIAN_POINT('',(2.273965807127,0.728990969834));+#4886 = VECTOR('',#4887,1.);+#4887 = DIRECTION('',(0.596575959062,-0.802556617983));+#4888 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4889 = PCURVE('',#4890,#4895);+#4890 = PLANE('',#4891);+#4891 = AXIS2_PLACEMENT_3D('',#4892,#4893,#4894);+#4892 = CARTESIAN_POINT('',(-0.13701203044,2.86486211062E-04,1.8000001)+ );+#4893 = DIRECTION('',(0.,1.,0.));+#4894 = DIRECTION('',(-1.,0.,0.));+#4895 = DEFINITIONAL_REPRESENTATION('',(#4896),#4899);+#4896 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#4897,#4898),.UNSPECIFIED.,.F.,+ .F.,(2,2),(0.692323367612,0.771536804971),.PIECEWISE_BEZIER_KNOTS.);+#4897 = CARTESIAN_POINT('',(7.921343735865E-02,-5.00001E-02));+#4898 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#4899 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4900 = ORIENTED_EDGE('',*,*,#4901,.T.);+#4901 = EDGE_CURVE('',#4875,#4902,#4904,.T.);+#4902 = VERTEX_POINT('',#4903);+#4903 = CARTESIAN_POINT('',(-0.13701203044,-0.101559361821,1.75));+#4904 = SURFACE_CURVE('',#4905,(#4909,#4916),.PCURVE_S1.);+#4905 = LINE('',#4906,#4907);+#4906 = CARTESIAN_POINT('',(-0.13701203044,1.079305959472,1.75));+#4907 = VECTOR('',#4908,1.);+#4908 = DIRECTION('',(0.,-1.,0.));+#4909 = PCURVE('',#2438,#4910);+#4910 = DEFINITIONAL_REPRESENTATION('',(#4911),#4915);+#4911 = LINE('',#4912,#4913);+#4912 = CARTESIAN_POINT('',(1.868271897306,-0.53392807612));+#4913 = VECTOR('',#4914,1.);+#4914 = DIRECTION('',(0.802556617983,0.596575959062));+#4915 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4916 = PCURVE('',#4917,#4922);+#4917 = PLANE('',#4918);+#4918 = AXIS2_PLACEMENT_3D('',#4919,#4920,#4921);+#4919 = CARTESIAN_POINT('',(-0.13701203044,-0.101559361821,1.8000001));+#4920 = DIRECTION('',(1.,0.,0.));+#4921 = DIRECTION('',(0.,1.,0.));+#4922 = DEFINITIONAL_REPRESENTATION('',(#4923),#4926);+#4923 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#4924,#4925),.UNSPECIFIED.,.F.,+ .F.,(2,2),(1.079019473261,1.180865321293),.PIECEWISE_BEZIER_KNOTS.);+#4924 = CARTESIAN_POINT('',(0.101845848033,-5.00001E-02));+#4925 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#4926 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4927 = ORIENTED_EDGE('',*,*,#4928,.T.);+#4928 = EDGE_CURVE('',#4902,#4929,#4931,.T.);+#4929 = VERTEX_POINT('',#4930);+#4930 = CARTESIAN_POINT('',(-0.107933680018,-0.101559361821,1.75));+#4931 = SURFACE_CURVE('',#4932,(#4936,#4943),.PCURVE_S1.);+#4932 = LINE('',#4933,#4934);+#4933 = CARTESIAN_POINT('',(-0.8940096602,-0.101559361821,1.75));+#4934 = VECTOR('',#4935,1.);+#4935 = DIRECTION('',(1.,-0.,0.));+#4936 = PCURVE('',#2438,#4937);+#4937 = DEFINITIONAL_REPRESENTATION('',(#4938),#4942);+#4938 = LINE('',#4939,#4940);+#4939 = CARTESIAN_POINT('',(2.364376588875,0.778081243015));+#4940 = VECTOR('',#4941,1.);+#4941 = DIRECTION('',(0.596575959062,-0.802556617983));+#4942 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4943 = PCURVE('',#4944,#4949);+#4944 = PLANE('',#4945);+#4945 = AXIS2_PLACEMENT_3D('',#4946,#4947,#4948);+#4946 = CARTESIAN_POINT('',(-0.107933680018,-0.101559361821,1.8000001));+#4947 = DIRECTION('',(0.,1.,0.));+#4948 = DIRECTION('',(-1.,0.,0.));+#4949 = DEFINITIONAL_REPRESENTATION('',(#4950),#4953);+#4950 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#4951,#4952),.UNSPECIFIED.,.F.,+ .F.,(2,2),(0.756997629759,0.786075980182),.PIECEWISE_BEZIER_KNOTS.);+#4951 = CARTESIAN_POINT('',(2.907835042279E-02,-5.00001E-02));+#4952 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#4953 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4954 = ORIENTED_EDGE('',*,*,#4955,.T.);+#4955 = EDGE_CURVE('',#4929,#4956,#4958,.T.);+#4956 = VERTEX_POINT('',#4957);+#4957 = CARTESIAN_POINT('',(-0.107933680018,0.112302594736,1.75));+#4958 = SURFACE_CURVE('',#4959,(#4963,#4970),.PCURVE_S1.);+#4959 = LINE('',#4960,#4961);+#4960 = CARTESIAN_POINT('',(-0.107933680018,1.186236937751,1.75));+#4961 = VECTOR('',#4962,1.);+#4962 = DIRECTION('',(0.,1.,0.));+#4963 = PCURVE('',#2438,#4964);+#4964 = DEFINITIONAL_REPRESENTATION('',(#4965),#4969);+#4965 = LINE('',#4966,#4967);+#4966 = CARTESIAN_POINT('',(1.799801177812,-0.621057549612));+#4967 = VECTOR('',#4968,1.);+#4968 = DIRECTION('',(-0.802556617983,-0.596575959062));+#4969 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4970 = PCURVE('',#4971,#4976);+#4971 = PLANE('',#4972);+#4972 = AXIS2_PLACEMENT_3D('',#4973,#4974,#4975);+#4973 = CARTESIAN_POINT('',(-0.107933680018,0.112302594736,1.8000001));+#4974 = DIRECTION('',(-1.,0.,0.));+#4975 = DIRECTION('',(0.,-1.,0.));+#4976 = DEFINITIONAL_REPRESENTATION('',(#4977),#4980);+#4977 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#4978,#4979),.UNSPECIFIED.,.F.,+ .F.,(2,2),(-1.287796299572,-1.073934343014),.PIECEWISE_BEZIER_KNOTS.);+#4978 = CARTESIAN_POINT('',(0.213861956558,-5.00001E-02));+#4979 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#4980 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4981 = ORIENTED_EDGE('',*,*,#4982,.T.);+#4982 = EDGE_CURVE('',#4956,#4983,#4985,.T.);+#4983 = VERTEX_POINT('',#4984);+#4984 = CARTESIAN_POINT('',(-0.13701203044,0.112302594736,1.75));+#4985 = SURFACE_CURVE('',#4986,(#4990,#4997),.PCURVE_S1.);+#4986 = LINE('',#4987,#4988);+#4987 = CARTESIAN_POINT('',(-0.908548835411,0.112302594736,1.75));+#4988 = VECTOR('',#4989,1.);+#4989 = DIRECTION('',(-1.,-0.,-0.));+#4990 = PCURVE('',#2438,#4991);+#4991 = DEFINITIONAL_REPRESENTATION('',(#4992),#4996);+#4992 = LINE('',#4993,#4994);+#4993 = CARTESIAN_POINT('',(2.184066537909,0.66216485246));+#4994 = VECTOR('',#4995,1.);+#4995 = DIRECTION('',(-0.596575959062,0.802556617983));+#4996 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4997 = PCURVE('',#4998,#5003);+#4998 = PLANE('',#4999);+#4999 = AXIS2_PLACEMENT_3D('',#5000,#5001,#5002);+#5000 = CARTESIAN_POINT('',(-0.13701203044,0.112302594736,1.8000001));+#5001 = DIRECTION('',(0.,-1.,0.));+#5002 = DIRECTION('',(1.,0.,0.));+#5003 = DEFINITIONAL_REPRESENTATION('',(#5004),#5007);+#5004 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#5005,#5006),.UNSPECIFIED.,.F.,+ .F.,(2,2),(-0.800615155394,-0.771536804971),.PIECEWISE_BEZIER_KNOTS.);+#5005 = CARTESIAN_POINT('',(2.907835042279E-02,-5.00001E-02));+#5006 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#5007 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5008 = ORIENTED_EDGE('',*,*,#5009,.T.);+#5009 = EDGE_CURVE('',#4983,#5010,#5012,.T.);+#5010 = VERTEX_POINT('',#5011);+#5011 = CARTESIAN_POINT('',(-0.13701203044,2.463781415133E-02,1.75));+#5012 = SURFACE_CURVE('',#5013,(#5017,#5024),.PCURVE_S1.);+#5013 = LINE('',#5014,#5015);+#5014 = CARTESIAN_POINT('',(-0.13701203044,1.142404547458,1.75));+#5015 = VECTOR('',#5016,1.);+#5016 = DIRECTION('',(0.,-1.,0.));+#5017 = PCURVE('',#2438,#5018);+#5018 = DEFINITIONAL_REPRESENTATION('',(#5019),#5023);+#5019 = LINE('',#5020,#5021);+#5020 = CARTESIAN_POINT('',(1.817631707932,-0.571571176764));+#5021 = VECTOR('',#5022,1.);+#5022 = DIRECTION('',(0.802556617983,0.596575959062));+#5023 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5024 = PCURVE('',#5025,#5030);+#5025 = PLANE('',#5026);+#5026 = AXIS2_PLACEMENT_3D('',#5027,#5028,#5029);+#5027 = CARTESIAN_POINT('',(-0.13701203044,2.463781415133E-02,1.8000001)+ );+#5028 = DIRECTION('',(1.,0.,0.));+#5029 = DIRECTION('',(0.,1.,0.));+#5030 = DEFINITIONAL_REPRESENTATION('',(#5031),#5034);+#5031 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#5032,#5033),.UNSPECIFIED.,.F.,+ .F.,(2,2),(1.030101952722,1.117766733307),.PIECEWISE_BEZIER_KNOTS.);+#5032 = CARTESIAN_POINT('',(8.766478058498E-02,-5.00001E-02));+#5033 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#5034 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5035 = ORIENTED_EDGE('',*,*,#5036,.T.);+#5036 = EDGE_CURVE('',#5010,#5037,#5039,.T.);+#5037 = VERTEX_POINT('',#5038);+#5038 = CARTESIAN_POINT('',(-0.216225467799,2.463781415133E-02,1.75));+#5039 = SURFACE_CURVE('',#5040,(#5044,#5051),.PCURVE_S1.);+#5040 = LINE('',#5041,#5042);+#5041 = CARTESIAN_POINT('',(-0.948155554091,2.463781415133E-02,1.75));+#5042 = VECTOR('',#5043,1.);+#5043 = DIRECTION('',(-1.,-0.,-0.));+#5044 = PCURVE('',#2438,#5045);+#5045 = DEFINITIONAL_REPRESENTATION('',(#5046),#5050);+#5046 = LINE('',#5047,#5048);+#5047 = CARTESIAN_POINT('',(2.23079407155,0.746250187207));+#5048 = VECTOR('',#5049,1.);+#5049 = DIRECTION('',(-0.596575959062,0.802556617983));+#5050 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5051 = PCURVE('',#5052,#5057);+#5052 = PLANE('',#5053);+#5053 = AXIS2_PLACEMENT_3D('',#5054,#5055,#5056);+#5054 = CARTESIAN_POINT('',(-0.216225467799,2.463781415133E-02,1.8000001+ ));+#5055 = DIRECTION('',(0.,-1.,0.));+#5056 = DIRECTION('',(1.,0.,0.));+#5057 = DEFINITIONAL_REPRESENTATION('',(#5058),#5061);+#5058 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#5059,#5060),.UNSPECIFIED.,.F.,+ .F.,(2,2),(-0.81114352365,-0.731930086291),.PIECEWISE_BEZIER_KNOTS.);+#5059 = CARTESIAN_POINT('',(7.921343735865E-02,-5.00001E-02));+#5060 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#5061 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5062 = ORIENTED_EDGE('',*,*,#5063,.T.);+#5063 = EDGE_CURVE('',#5037,#4765,#5064,.T.);+#5064 = SURFACE_CURVE('',#5065,(#5069,#5076),.PCURVE_S1.);+#5065 = LINE('',#5066,#5067);+#5066 = CARTESIAN_POINT('',(-0.216225467799,1.186236937751,1.75));+#5067 = VECTOR('',#5068,1.);+#5068 = DIRECTION('',(0.,1.,0.));+#5069 = PCURVE('',#2438,#5070);+#5070 = DEFINITIONAL_REPRESENTATION('',(#5071),#5075);+#5071 = LINE('',#5072,#5073);+#5072 = CARTESIAN_POINT('',(1.735196900658,-0.534147258655));+#5073 = VECTOR('',#5074,1.);+#5074 = DIRECTION('',(-0.802556617983,-0.596575959062));+#5075 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5076 = PCURVE('',#5077,#5082);+#5077 = PLANE('',#5078);+#5078 = AXIS2_PLACEMENT_3D('',#5079,#5080,#5081);+#5079 = CARTESIAN_POINT('',(-0.216225467799,0.112302594736,1.8000001));+#5080 = DIRECTION('',(-1.,0.,0.));+#5081 = DIRECTION('',(0.,-1.,0.));+#5082 = DEFINITIONAL_REPRESENTATION('',(#5083),#5086);+#5083 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#5084,#5085),.UNSPECIFIED.,.F.,+ .F.,(2,2),(-1.161599123599,-1.073934343014),.PIECEWISE_BEZIER_KNOTS.);+#5084 = CARTESIAN_POINT('',(8.766478058498E-02,-5.00001E-02));+#5085 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#5086 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5087 = FACE_BOUND('',#5088,.F.);+#5088 = EDGE_LOOP('',(#5089,#5118,#5145,#5181,#5217,#5253,#5298,#5334,+ #5370,#5406,#5442,#5469,#5505,#5541,#5577,#5622,#5658,#5703,#5739,+ #5775,#5802,#5829));+#5089 = ORIENTED_EDGE('',*,*,#5090,.T.);+#5090 = EDGE_CURVE('',#5091,#5093,#5095,.T.);+#5091 = VERTEX_POINT('',#5092);+#5092 = CARTESIAN_POINT('',(-0.303603762173,0.112302594736,1.75));+#5093 = VERTEX_POINT('',#5094);+#5094 = CARTESIAN_POINT('',(-0.411895549954,0.112302594736,1.75));+#5095 = SURFACE_CURVE('',#5096,(#5100,#5107),.PCURVE_S1.);+#5096 = LINE('',#5097,#5098);+#5097 = CARTESIAN_POINT('',(-1.045990595168,0.112302594736,1.75));+#5098 = VECTOR('',#5099,1.);+#5099 = DIRECTION('',(-1.,-0.,-0.));+#5100 = PCURVE('',#2438,#5101);+#5101 = DEFINITIONAL_REPRESENTATION('',(#5102),#5106);+#5102 = LINE('',#5103,#5104);+#5103 = CARTESIAN_POINT('',(2.102072088267,0.772469646341));+#5104 = VECTOR('',#5105,1.);+#5105 = DIRECTION('',(-0.596575959062,0.802556617983));+#5106 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5107 = PCURVE('',#5108,#5113);+#5108 = PLANE('',#5109);+#5109 = AXIS2_PLACEMENT_3D('',#5110,#5111,#5112);+#5110 = CARTESIAN_POINT('',(-0.411895549954,0.112302594736,1.8000001));+#5111 = DIRECTION('',(0.,-1.,0.));+#5112 = DIRECTION('',(1.,0.,0.));+#5113 = DEFINITIONAL_REPRESENTATION('',(#5114),#5117);+#5114 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#5115,#5116),.UNSPECIFIED.,.F.,+ .F.,(2,2),(-0.742386832995,-0.634095045214),.PIECEWISE_BEZIER_KNOTS.);+#5115 = CARTESIAN_POINT('',(0.108291787781,-5.00001E-02));+#5116 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#5117 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5118 = ORIENTED_EDGE('',*,*,#5119,.T.);+#5119 = EDGE_CURVE('',#5093,#5120,#5122,.T.);+#5120 = VERTEX_POINT('',#5121);+#5121 = CARTESIAN_POINT('',(-0.411895549954,4.870265588054E-03,1.75));+#5122 = SURFACE_CURVE('',#5123,(#5127,#5134),.PCURVE_S1.);+#5123 = LINE('',#5124,#5125);+#5124 = CARTESIAN_POINT('',(-0.411895549954,1.132520773177,1.75));+#5125 = VECTOR('',#5126,1.);+#5126 = DIRECTION('',(0.,-1.,0.));+#5127 = PCURVE('',#2438,#5128);+#5128 = DEFINITIONAL_REPRESENTATION('',(#5129),#5133);+#5129 = LINE('',#5130,#5131);+#5130 = CARTESIAN_POINT('',(1.661575097108,-0.345065166882));+#5131 = VECTOR('',#5132,1.);+#5132 = DIRECTION('',(0.802556617983,0.596575959062));+#5133 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5134 = PCURVE('',#5135,#5140);+#5135 = PLANE('',#5136);+#5136 = AXIS2_PLACEMENT_3D('',#5137,#5138,#5139);+#5137 = CARTESIAN_POINT('',(-0.411895549954,4.870265588054E-03,1.8000001+ ));+#5138 = DIRECTION('',(1.,0.,0.));+#5139 = DIRECTION('',(0.,1.,0.));+#5140 = DEFINITIONAL_REPRESENTATION('',(#5141),#5144);+#5141 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#5142,#5143),.UNSPECIFIED.,.F.,+ .F.,(2,2),(1.02021817844,1.127650507588),.PIECEWISE_BEZIER_KNOTS.);+#5142 = CARTESIAN_POINT('',(0.107432329148,-5.00001E-02));+#5143 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#5144 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5145 = ORIENTED_EDGE('',*,*,#5146,.T.);+#5146 = EDGE_CURVE('',#5120,#5147,#5149,.T.);+#5147 = VERTEX_POINT('',#5148);+#5148 = CARTESIAN_POINT('',(-0.390838813441,1.282025794503E-02,1.75));+#5149 = SURFACE_CURVE('',#5150,(#5156,#5165),.PCURVE_S1.);+#5150 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#5151,#5152,#5153,#5154,#5155),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5151 = CARTESIAN_POINT('',(-0.411895549954,4.870265588054E-03,1.75));+#5152 = CARTESIAN_POINT('',(-0.406882054439,7.520256074991E-03,1.75));+#5153 = CARTESIAN_POINT('',(-0.40170141618,9.728596735647E-03,1.75));+#5154 = CARTESIAN_POINT('',(-0.396353658,1.149526282386E-02,1.75));+#5155 = CARTESIAN_POINT('',(-0.390838813441,1.282025794502E-02,1.75));+#5156 = PCURVE('',#2438,#5157);+#5157 = DEFINITIONAL_REPRESENTATION('',(#5158),#5164);+#5158 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#5159,#5160,#5161,#5162,#5163),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5159 = CARTESIAN_POINT('',(2.566578474745,0.32766401617));+#5160 = CARTESIAN_POINT('',(2.567442638238,0.322059481548));+#5161 = CARTESIAN_POINT('',(2.568760964063,0.316584283081));+#5162 = CARTESIAN_POINT('',(2.570533458468,0.311238453846));+#5163 = CARTESIAN_POINT('',(2.572760098546,0.306022018613));+#5164 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5165 = PCURVE('',#5166,#5173);+#5166 = SURFACE_OF_LINEAR_EXTRUSION('',#5167,#5171);+#5167 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#5168,#5169,#5170),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5168 = CARTESIAN_POINT('',(-0.390838813441,1.282025794503E-02,1.8000001+ ));+#5169 = CARTESIAN_POINT('',(-0.401868532567,1.01702604927E-02,1.8000001)+ );+#5170 = CARTESIAN_POINT('',(-0.411895549954,4.870265588054E-03,1.8000001+ ));+#5171 = VECTOR('',#5172,1.);+#5172 = DIRECTION('',(0.,0.,1.));+#5173 = DEFINITIONAL_REPRESENTATION('',(#5174),#5180);+#5174 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#5175,#5176,#5177,#5178,#5179),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5175 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#5176 = CARTESIAN_POINT('',(0.750000657113,-5.00001E-02));+#5177 = CARTESIAN_POINT('',(0.499999984599,-5.00001E-02));+#5178 = CARTESIAN_POINT('',(0.249999319811,-5.00001E-02));+#5179 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#5180 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5181 = ORIENTED_EDGE('',*,*,#5182,.T.);+#5182 = EDGE_CURVE('',#5147,#5183,#5185,.T.);+#5183 = VERTEX_POINT('',#5184);+#5184 = CARTESIAN_POINT('',(-0.368206402767,1.547025539735E-02,1.75));+#5185 = SURFACE_CURVE('',#5186,(#5192,#5201),.PCURVE_S1.);+#5186 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#5187,#5188,#5189,#5190,#5191),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5187 = CARTESIAN_POINT('',(-0.390838813441,1.282025794502E-02,1.75));+#5188 = CARTESIAN_POINT('',(-0.385323934614,1.414526129969E-02,1.75));+#5189 = CARTESIAN_POINT('',(-0.379713554551,1.502859656744E-02,1.75));+#5190 = CARTESIAN_POINT('',(-0.374007699862,1.547025539735E-02,1.75));+#5191 = CARTESIAN_POINT('',(-0.368206402767,1.547025539735E-02,1.75));+#5192 = PCURVE('',#2438,#5193);+#5193 = DEFINITIONAL_REPRESENTATION('',(#5194),#5200);+#5194 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#5195,#5196,#5197,#5198,#5199),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5195 = CARTESIAN_POINT('',(2.572760098546,0.306022018613));+#5196 = CARTESIAN_POINT('',(2.574986752461,0.300805550966));+#5197 = CARTESIAN_POINT('',(2.577624843762,0.295775926732));+#5198 = CARTESIAN_POINT('',(2.580674363279,0.29093317225));+#5199 = CARTESIAN_POINT('',(2.584135277657,0.286277302874));+#5200 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5201 = PCURVE('',#5202,#5209);+#5202 = SURFACE_OF_LINEAR_EXTRUSION('',#5203,#5207);+#5203 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#5204,#5205,#5206),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5204 = CARTESIAN_POINT('',(-0.368206402767,1.547025539735E-02,1.8000001+ ));+#5205 = CARTESIAN_POINT('',(-0.379809094315,1.547025539735E-02,1.8000001+ ));+#5206 = CARTESIAN_POINT('',(-0.390838813441,1.282025794503E-02,1.8000001+ ));+#5207 = VECTOR('',#5208,1.);+#5208 = DIRECTION('',(0.,0.,1.));+#5209 = DEFINITIONAL_REPRESENTATION('',(#5210),#5216);+#5210 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#5211,#5212,#5213,#5214,#5215),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5211 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#5212 = CARTESIAN_POINT('',(0.749999126696,-5.00001E-02));+#5213 = CARTESIAN_POINT('',(0.499998019266,-5.00001E-02));+#5214 = CARTESIAN_POINT('',(0.249997902233,-5.00001E-02));+#5215 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#5216 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5217 = ORIENTED_EDGE('',*,*,#5218,.T.);+#5218 = EDGE_CURVE('',#5183,#5219,#5221,.T.);+#5219 = VERTEX_POINT('',#5220);+#5220 = CARTESIAN_POINT('',(-0.330891573777,2.721619005089E-03,1.75));+#5221 = SURFACE_CURVE('',#5222,(#5228,#5237),.PCURVE_S1.);+#5222 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#5223,#5224,#5225,#5226,#5227),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5223 = CARTESIAN_POINT('',(-0.368206402767,1.547025539735E-02,1.75));+#5224 = CARTESIAN_POINT('',(-0.356249440461,1.547025539735E-02,1.75));+#5225 = CARTESIAN_POINT('',(-0.346042074444,1.334684637676E-02,1.75));+#5226 = CARTESIAN_POINT('',(-0.337589119733,9.096823177884E-03,1.75));+#5227 = CARTESIAN_POINT('',(-0.330891573777,2.721619005089E-03,1.75));+#5228 = PCURVE('',#2438,#5229);+#5229 = DEFINITIONAL_REPRESENTATION('',(#5230),#5236);+#5230 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#5231,#5232,#5233,#5234,#5235),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5231 = CARTESIAN_POINT('',(2.584135277657,0.286277302874));+#5232 = CARTESIAN_POINT('',(2.591268513912,0.276681163644));+#5233 = CARTESIAN_POINT('',(2.599062139045,0.269755949268));+#5234 = CARTESIAN_POINT('',(2.607515852854,0.265507436189));+#5235 = CARTESIAN_POINT('',(2.616627910056,0.263935569901));+#5236 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5237 = PCURVE('',#5238,#5245);+#5238 = SURFACE_OF_LINEAR_EXTRUSION('',#5239,#5243);+#5239 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#5240,#5241,#5242),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5240 = CARTESIAN_POINT('',(-0.330891573777,2.721619005089E-03,1.8000001+ ));+#5241 = CARTESIAN_POINT('',(-0.344284804144,1.547025539735E-02,1.8000001+ ));+#5242 = CARTESIAN_POINT('',(-0.368206402767,1.547025539735E-02,1.8000001+ ));+#5243 = VECTOR('',#5244,1.);+#5244 = DIRECTION('',(0.,0.,1.));+#5245 = DEFINITIONAL_REPRESENTATION('',(#5246),#5252);+#5246 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#5247,#5248,#5249,#5250,#5251),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5247 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#5248 = CARTESIAN_POINT('',(0.750080199595,-5.00001E-02));+#5249 = CARTESIAN_POINT('',(0.500076676919,-5.00001E-02));+#5250 = CARTESIAN_POINT('',(0.250034747899,-5.00001E-02));+#5251 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#5252 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5253 = ORIENTED_EDGE('',*,*,#5254,.T.);+#5254 = EDGE_CURVE('',#5219,#5255,#5257,.T.);+#5255 = VERTEX_POINT('',#5256);+#5256 = CARTESIAN_POINT('',(-0.317498343409,-3.294591427213E-02,1.75));+#5257 = SURFACE_CURVE('',#5258,(#5267,#5279),.PCURVE_S1.);+#5258 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#5259,#5260,#5261,#5262,#5263,+ #5264,#5265,#5266),.UNSPECIFIED.,.F.,.F.,(5,3,5),(0.,0.175982294588,+ 1.),.UNSPECIFIED.);+#5259 = CARTESIAN_POINT('',(-0.330891573777,2.721619005089E-03,1.75));+#5260 = CARTESIAN_POINT('',(-0.32971298323,1.599752067894E-03,1.75));+#5261 = CARTESIAN_POINT('',(-0.328603522124,4.253676168195E-04,1.75));+#5262 = CARTESIAN_POINT('',(-0.327563200958,-8.015305589595E-04,1.75));+#5263 = CARTESIAN_POINT('',(-0.322044602801,-8.071605301692E-03,1.75));+#5264 = CARTESIAN_POINT('',(-0.319013182027,-1.521346390347E-02,1.75));+#5265 = CARTESIAN_POINT('',(-0.317498343409,-2.350574252386E-02,1.75));+#5266 = CARTESIAN_POINT('',(-0.317498343409,-3.294591427213E-02,1.75));+#5267 = PCURVE('',#2438,#5268);+#5268 = DEFINITIONAL_REPRESENTATION('',(#5269),#5278);+#5269 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#5270,#5271,#5272,#5273,#5274,+ #5275,#5276,#5277),.UNSPECIFIED.,.F.,.F.,(5,3,5),(0.,0.175982294588,+ 1.),.UNSPECIFIED.);+#5270 = CARTESIAN_POINT('',(2.616627910056,0.263935569901));+#5271 = CARTESIAN_POINT('',(2.618231390576,0.263658963102));+#5272 = CARTESIAN_POINT('',(2.619835778413,0.26346916728));+#5273 = CARTESIAN_POINT('',(2.621441064261,0.263366188598));+#5274 = CARTESIAN_POINT('',(2.630567973847,0.263274352938));+#5275 = CARTESIAN_POINT('',(2.638108192488,0.265102127279));+#5276 = CARTESIAN_POINT('',(2.645666931875,0.268833357592));+#5277 = CARTESIAN_POINT('',(2.653243204186,0.274465137106));+#5278 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5279 = PCURVE('',#5280,#5287);+#5280 = SURFACE_OF_LINEAR_EXTRUSION('',#5281,#5285);+#5281 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#5282,#5283,#5284),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5282 = CARTESIAN_POINT('',(-0.317498343409,-3.294591427213E-02,+ 1.8000001));+#5283 = CARTESIAN_POINT('',(-0.317498343409,-1.002701738717E-02,+ 1.8000001));+#5284 = CARTESIAN_POINT('',(-0.330891573777,2.721619005089E-03,1.8000001+ ));+#5285 = VECTOR('',#5286,1.);+#5286 = DIRECTION('',(0.,0.,1.));+#5287 = DEFINITIONAL_REPRESENTATION('',(#5288),#5297);+#5288 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#5289,#5290,#5291,#5292,#5293,+ #5294,#5295,#5296),.UNSPECIFIED.,.F.,.F.,(5,3,5),(0.,0.175982294588,+ 1.),.UNSPECIFIED.);+#5289 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#5290 = CARTESIAN_POINT('',(0.95600051242,-5.00001E-02));+#5291 = CARTESIAN_POINT('',(0.912000512158,-5.00001E-02));+#5292 = CARTESIAN_POINT('',(0.868000255802,-5.00001E-02));+#5293 = CARTESIAN_POINT('',(0.617973649969,-5.00001E-02));+#5294 = CARTESIAN_POINT('',(0.411947305402,-5.00001E-02));+#5295 = CARTESIAN_POINT('',(0.205947341088,-5.00001E-02));+#5296 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#5297 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5298 = ORIENTED_EDGE('',*,*,#5299,.T.);+#5299 = EDGE_CURVE('',#5255,#5300,#5302,.T.);+#5300 = VERTEX_POINT('',#5301);+#5301 = CARTESIAN_POINT('',(-0.33046184446,-6.875669065488E-02,1.75));+#5302 = SURFACE_CURVE('',#5303,(#5309,#5318),.PCURVE_S1.);+#5303 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#5304,#5305,#5306,#5307,#5308),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5304 = CARTESIAN_POINT('',(-0.317498343409,-3.294591427213E-02,1.75));+#5305 = CARTESIAN_POINT('',(-0.317498343409,-4.454507370587E-02,1.75));+#5306 = CARTESIAN_POINT('',(-0.319657611004,-5.438243977705E-02,1.75));+#5307 = CARTESIAN_POINT('',(-0.323979329802,-6.245325098712E-02,1.75));+#5308 = CARTESIAN_POINT('',(-0.33046184446,-6.875669065488E-02,1.75));+#5309 = PCURVE('',#2438,#5310);+#5310 = DEFINITIONAL_REPRESENTATION('',(#5311),#5317);+#5311 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#5312,#5313,#5314,#5315,#5316),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5312 = CARTESIAN_POINT('',(2.653243204186,0.274465137106));+#5313 = CARTESIAN_POINT('',(2.662552186353,0.28138491677));+#5314 = CARTESIAN_POINT('',(2.669159062461,0.288986587366));+#5315 = CARTESIAN_POINT('',(2.673058111873,0.297269863326));+#5316 = CARTESIAN_POINT('',(2.674249666695,0.306232928932));+#5317 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5318 = PCURVE('',#5319,#5326);+#5319 = SURFACE_OF_LINEAR_EXTRUSION('',#5320,#5324);+#5320 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#5321,#5322,#5323),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5321 = CARTESIAN_POINT('',(-0.33046184446,-6.875669065488E-02,1.8000001+ ));+#5322 = CARTESIAN_POINT('',(-0.317498343409,-5.615129736815E-02,+ 1.8000001));+#5323 = CARTESIAN_POINT('',(-0.317498343409,-3.294591427213E-02,+ 1.8000001));+#5324 = VECTOR('',#5325,1.);+#5325 = DIRECTION('',(0.,0.,1.));+#5326 = DEFINITIONAL_REPRESENTATION('',(#5327),#5333);+#5327 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#5328,#5329,#5330,#5331,#5332),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5328 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#5329 = CARTESIAN_POINT('',(0.750076105494,-5.00001E-02));+#5330 = CARTESIAN_POINT('',(0.500070428037,-5.00001E-02));+#5331 = CARTESIAN_POINT('',(0.25002947248,-5.00001E-02));+#5332 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#5333 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5334 = ORIENTED_EDGE('',*,*,#5335,.T.);+#5335 = EDGE_CURVE('',#5300,#5336,#5338,.T.);+#5336 = VERTEX_POINT('',#5337);+#5337 = CARTESIAN_POINT('',(-0.367346944134,-8.136208394161E-02,1.75));+#5338 = SURFACE_CURVE('',#5339,(#5345,#5354),.PCURVE_S1.);+#5339 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#5340,#5341,#5342,#5343,#5344),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5340 = CARTESIAN_POINT('',(-0.33046184446,-6.875669065488E-02,1.75));+#5341 = CARTESIAN_POINT('',(-0.336944580666,-7.506034575028E-02,1.75));+#5342 = CARTESIAN_POINT('',(-0.345254368409,-7.926260404885E-02,1.75));+#5343 = CARTESIAN_POINT('',(-0.355390182697,-8.136208394161E-02,1.75));+#5344 = CARTESIAN_POINT('',(-0.367346944134,-8.136208394161E-02,1.75));+#5345 = PCURVE('',#2438,#5346);+#5346 = DEFINITIONAL_REPRESENTATION('',(#5347),#5353);+#5347 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#5348,#5349,#5350,#5351,#5352),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5348 = CARTESIAN_POINT('',(2.674249666695,0.306232928932));+#5349 = CARTESIAN_POINT('',(2.67544126224,0.315196300861));+#5350 = CARTESIAN_POINT('',(2.673856392856,0.324372342282));+#5351 = CARTESIAN_POINT('',(2.669494561208,0.333759406349));+#5352 = CARTESIAN_POINT('',(2.662361444786,0.34335538437));+#5353 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5354 = PCURVE('',#5355,#5362);+#5355 = SURFACE_OF_LINEAR_EXTRUSION('',#5356,#5360);+#5356 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#5357,#5358,#5359),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5357 = CARTESIAN_POINT('',(-0.367346944134,-8.136208394161E-02,+ 1.8000001));+#5358 = CARTESIAN_POINT('',(-0.343425345511,-8.136208394161E-02,+ 1.8000001));+#5359 = CARTESIAN_POINT('',(-0.33046184446,-6.875669065488E-02,1.8000001+ ));+#5360 = VECTOR('',#5361,1.);+#5361 = DIRECTION('',(0.,0.,1.));+#5362 = DEFINITIONAL_REPRESENTATION('',(#5363),#5369);+#5363 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#5364,#5365,#5366,#5367,#5368),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5364 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#5365 = CARTESIAN_POINT('',(0.749961982462,-5.00001E-02));+#5366 = CARTESIAN_POINT('',(0.499918340423,-5.00001E-02));+#5367 = CARTESIAN_POINT('',(0.249915601901,-5.00001E-02));+#5368 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#5369 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5370 = ORIENTED_EDGE('',*,*,#5371,.T.);+#5371 = EDGE_CURVE('',#5336,#5372,#5374,.T.);+#5372 = VERTEX_POINT('',#5373);+#5373 = CARTESIAN_POINT('',(-0.394563134185,-7.78526278561E-02,1.75));+#5374 = SURFACE_CURVE('',#5375,(#5381,#5390),.PCURVE_S1.);+#5375 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#5376,#5377,#5378,#5379,#5380),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5376 = CARTESIAN_POINT('',(-0.367346944134,-8.136208394161E-02,1.75));+#5377 = CARTESIAN_POINT('',(-0.374294182738,-8.136208394161E-02,1.75));+#5378 = CARTESIAN_POINT('',(-0.381146001057,-8.077718335249E-02,1.75));+#5379 = CARTESIAN_POINT('',(-0.387902336015,-7.960735425573E-02,1.75));+#5380 = CARTESIAN_POINT('',(-0.394563134185,-7.78526278561E-02,1.75));+#5381 = PCURVE('',#2438,#5382);+#5382 = DEFINITIONAL_REPRESENTATION('',(#5383),#5389);+#5383 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#5384,#5385,#5386,#5387,#5388),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5384 = CARTESIAN_POINT('',(2.662361444786,0.34335538437));+#5385 = CARTESIAN_POINT('',(2.658216889253,0.348930936688));+#5386 = CARTESIAN_POINT('',(2.65365984333,0.354080971195));+#5387 = CARTESIAN_POINT('',(2.648690322239,0.358805420614));+#5388 = CARTESIAN_POINT('',(2.643308382898,0.363104260681));+#5389 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5390 = PCURVE('',#5391,#5398);+#5391 = SURFACE_OF_LINEAR_EXTRUSION('',#5392,#5396);+#5392 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#5393,#5394,#5395),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5393 = CARTESIAN_POINT('',(-0.394563134185,-7.78526278561E-02,1.8000001+ ));+#5394 = CARTESIAN_POINT('',(-0.381241525371,-8.136208394161E-02,+ 1.8000001));+#5395 = CARTESIAN_POINT('',(-0.367346944134,-8.136208394161E-02,+ 1.8000001));+#5396 = VECTOR('',#5397,1.);+#5397 = DIRECTION('',(0.,0.,1.));+#5398 = DEFINITIONAL_REPRESENTATION('',(#5399),#5405);+#5399 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#5400,#5401,#5402,#5403,#5404),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5400 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#5401 = CARTESIAN_POINT('',(0.750001871742,-5.00001E-02));+#5402 = CARTESIAN_POINT('',(0.500001091783,-5.00001E-02));+#5403 = CARTESIAN_POINT('',(0.2499997659,-5.00001E-02));+#5404 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#5405 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5406 = ORIENTED_EDGE('',*,*,#5407,.T.);+#5407 = EDGE_CURVE('',#5372,#5408,#5410,.T.);+#5408 = VERTEX_POINT('',#5409);+#5409 = CARTESIAN_POINT('',(-0.421063108708,-6.718101649404E-02,1.75));+#5410 = SURFACE_CURVE('',#5411,(#5417,#5426),.PCURVE_S1.);+#5411 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#5412,#5413,#5414,#5415,#5416),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5412 = CARTESIAN_POINT('',(-0.394563134185,-7.78526278561E-02,1.75));+#5413 = CARTESIAN_POINT('',(-0.401224143119,-7.609784593267E-02,1.75));+#5414 = CARTESIAN_POINT('',(-0.407861179905,-7.373426893138E-02,1.75));+#5415 = CARTESIAN_POINT('',(-0.414474186811,-7.07619523077E-02,1.75));+#5416 = CARTESIAN_POINT('',(-0.421063108708,-6.718101649404E-02,1.75));+#5417 = PCURVE('',#2438,#5418);+#5418 = DEFINITIONAL_REPRESENTATION('',(#5419),#5425);+#5419 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#5420,#5421,#5422,#5423,#5424),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5420 = CARTESIAN_POINT('',(2.643308382898,0.363104260681));+#5421 = CARTESIAN_POINT('',(2.637926273259,0.367403236775));+#5422 = CARTESIAN_POINT('',(2.632069872309,0.371319781355));+#5423 = CARTESIAN_POINT('',(2.625739258994,0.374853881172));+#5424 = CARTESIAN_POINT('',(2.618934562858,0.378005563828));+#5425 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5426 = PCURVE('',#5427,#5434);+#5427 = SURFACE_OF_LINEAR_EXTRUSION('',#5428,#5432);+#5428 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#5429,#5430,#5431),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5429 = CARTESIAN_POINT('',(-0.421063108708,-6.718101649404E-02,+ 1.8000001));+#5430 = CARTESIAN_POINT('',(-0.407884743,-7.434317177059E-02,1.8000001)+ );+#5431 = CARTESIAN_POINT('',(-0.394563134185,-7.78526278561E-02,1.8000001+ ));+#5432 = VECTOR('',#5433,1.);+#5433 = DIRECTION('',(0.,0.,1.));+#5434 = DEFINITIONAL_REPRESENTATION('',(#5435),#5441);+#5435 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#5436,#5437,#5438,#5439,#5440),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5436 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#5437 = CARTESIAN_POINT('',(0.749992323501,-5.00001E-02));+#5438 = CARTESIAN_POINT('',(0.499988281353,-5.00001E-02));+#5439 = CARTESIAN_POINT('',(0.249990099026,-5.00001E-02));+#5440 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#5441 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5442 = ORIENTED_EDGE('',*,*,#5443,.T.);+#5443 = EDGE_CURVE('',#5408,#5444,#5446,.T.);+#5444 = VERTEX_POINT('',#5445);+#5445 = CARTESIAN_POINT('',(-0.421063108708,-9.65458531279E-02,1.75));+#5446 = SURFACE_CURVE('',#5447,(#5451,#5458),.PCURVE_S1.);+#5447 = LINE('',#5448,#5449);+#5448 = CARTESIAN_POINT('',(-0.421063108708,1.081812713819,1.75));+#5449 = VECTOR('',#5450,1.);+#5450 = DIRECTION('',(0.,-1.,0.));+#5451 = PCURVE('',#2438,#5452);+#5452 = DEFINITIONAL_REPRESENTATION('',(#5453),#5457);+#5453 = LINE('',#5454,#5455);+#5454 = CARTESIAN_POINT('',(1.696802040574,-0.30745647279));+#5455 = VECTOR('',#5456,1.);+#5456 = DIRECTION('',(0.802556617983,0.596575959062));+#5457 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5458 = PCURVE('',#5459,#5464);+#5459 = PLANE('',#5460);+#5460 = AXIS2_PLACEMENT_3D('',#5461,#5462,#5463);+#5461 = CARTESIAN_POINT('',(-0.421063108708,-9.65458531279E-02,1.8000001+ ));+#5462 = DIRECTION('',(1.,0.,0.));+#5463 = DIRECTION('',(0.,1.,0.));+#5464 = DEFINITIONAL_REPRESENTATION('',(#5465),#5468);+#5465 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#5466,#5467),.UNSPECIFIED.,.F.,+ .F.,(2,2),(1.148993730313,1.178358566946),.PIECEWISE_BEZIER_KNOTS.);+#5466 = CARTESIAN_POINT('',(2.936483663386E-02,-5.00001E-02));+#5467 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#5468 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5469 = ORIENTED_EDGE('',*,*,#5470,.T.);+#5470 = EDGE_CURVE('',#5444,#5471,#5473,.T.);+#5471 = VERTEX_POINT('',#5472);+#5472 = CARTESIAN_POINT('',(-0.395780700582,-0.103421522193,1.75));+#5473 = SURFACE_CURVE('',#5474,(#5480,#5489),.PCURVE_S1.);+#5474 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#5475,#5476,#5477,#5478,#5479),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5475 = CARTESIAN_POINT('',(-0.421063108708,-9.65458531279E-02,1.75));+#5476 = CARTESIAN_POINT('',(-0.415476326904,-9.883786617605E-02,1.75));+#5477 = CARTESIAN_POINT('',(-0.409400244519,-0.100747788363,1.75));+#5478 = CARTESIAN_POINT('',(-0.402834978663,-0.102275649612,1.75));+#5479 = CARTESIAN_POINT('',(-0.395780700582,-0.103421522193,1.75));+#5480 = PCURVE('',#2438,#5481);+#5481 = DEFINITIONAL_REPRESENTATION('',(#5482),#5488);+#5482 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#5483,#5484,#5485,#5486,#5487),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5483 = CARTESIAN_POINT('',(2.642501506835,0.395523919406));+#5484 = CARTESIAN_POINT('',(2.647673916788,0.392407570577));+#5485 = CARTESIAN_POINT('',(2.652831582155,0.388670584109));+#5486 = CARTESIAN_POINT('',(2.657974457086,0.384313071837));+#5487 = CARTESIAN_POINT('',(2.663102497422,0.379335214313));+#5488 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5489 = PCURVE('',#5490,#5497);+#5490 = SURFACE_OF_LINEAR_EXTRUSION('',#5491,#5495);+#5491 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#5492,#5493,#5494),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5492 = CARTESIAN_POINT('',(-0.395780700582,-0.103421522193,1.8000001));+#5493 = CARTESIAN_POINT('',(-0.409890146477,-0.101129632505,1.8000001));+#5494 = CARTESIAN_POINT('',(-0.421063108708,-9.65458531279E-02,1.8000001+ ));+#5495 = VECTOR('',#5496,1.);+#5496 = DIRECTION('',(0.,0.,1.));+#5497 = DEFINITIONAL_REPRESENTATION('',(#5498),#5504);+#5498 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#5499,#5500,#5501,#5502,#5503),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5499 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#5500 = CARTESIAN_POINT('',(0.749986543892,-5.00001E-02));+#5501 = CARTESIAN_POINT('',(0.499980518783,-5.00001E-02));+#5502 = CARTESIAN_POINT('',(0.249984235148,-5.00001E-02));+#5503 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#5504 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5505 = ORIENTED_EDGE('',*,*,#5506,.T.);+#5506 = EDGE_CURVE('',#5471,#5507,#5509,.T.);+#5507 = VERTEX_POINT('',#5508);+#5508 = CARTESIAN_POINT('',(-0.364625325129,-0.105713411882,1.75));+#5509 = SURFACE_CURVE('',#5510,(#5516,#5525),.PCURVE_S1.);+#5510 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#5511,#5512,#5513,#5514,#5515),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5511 = CARTESIAN_POINT('',(-0.395780700582,-0.103421522193,1.75));+#5512 = CARTESIAN_POINT('',(-0.388725402407,-0.104567560476,1.75));+#5513 = CARTESIAN_POINT('',(-0.38118095056,-0.105331499603,1.75));+#5514 = CARTESIAN_POINT('',(-0.373147516367,-0.105713411882,1.75));+#5515 = CARTESIAN_POINT('',(-0.364625325129,-0.105713411882,1.75));+#5516 = PCURVE('',#2438,#5517);+#5517 = DEFINITIONAL_REPRESENTATION('',(#5518),#5524);+#5518 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#5519,#5520,#5521,#5522,#5523),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5519 = CARTESIAN_POINT('',(2.663102497422,0.379335214313));+#5520 = CARTESIAN_POINT('',(2.668231279305,0.374356636957));+#5521 = CARTESIAN_POINT('',(2.673345222304,0.368757534916));+#5522 = CARTESIAN_POINT('',(2.678444282239,0.362538088824));+#5523 = CARTESIAN_POINT('',(2.68352841665,0.355698547846));+#5524 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5525 = PCURVE('',#5526,#5533);+#5526 = SURFACE_OF_LINEAR_EXTRUSION('',#5527,#5531);+#5527 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#5528,#5529,#5530),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5528 = CARTESIAN_POINT('',(-0.364625325129,-0.105713411882,1.8000001));+#5529 = CARTESIAN_POINT('',(-0.381671254687,-0.105713411882,1.8000001));+#5530 = CARTESIAN_POINT('',(-0.395780700582,-0.103421522193,1.8000001));+#5531 = VECTOR('',#5532,1.);+#5532 = DIRECTION('',(0.,0.,1.));+#5533 = DEFINITIONAL_REPRESENTATION('',(#5534),#5540);+#5534 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#5535,#5536,#5537,#5538,#5539),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5535 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#5536 = CARTESIAN_POINT('',(0.749979615492,-5.00001E-02));+#5537 = CARTESIAN_POINT('',(0.499971282865,-5.00001E-02));+#5538 = CARTESIAN_POINT('',(0.249977310087,-5.00001E-02));+#5539 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#5540 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5541 = ORIENTED_EDGE('',*,*,#5542,.T.);+#5542 = EDGE_CURVE('',#5507,#5543,#5545,.T.);+#5543 = VERTEX_POINT('',#5544);+#5544 = CARTESIAN_POINT('',(-0.308832135525,-8.623234952967E-02,1.75));+#5545 = SURFACE_CURVE('',#5546,(#5552,#5561),.PCURVE_S1.);+#5546 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#5547,#5548,#5549,#5550,#5551),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5547 = CARTESIAN_POINT('',(-0.364625325129,-0.105713411882,1.75));+#5548 = CARTESIAN_POINT('',(-0.346946369043,-0.105713411882,1.75));+#5549 = CARTESIAN_POINT('',(-0.331746545869,-0.102470817421,1.75));+#5550 = CARTESIAN_POINT('',(-0.319040794328,-9.597535021223E-02,1.75));+#5551 = CARTESIAN_POINT('',(-0.308832135525,-8.623234952967E-02,1.75));+#5552 = PCURVE('',#2438,#5553);+#5553 = DEFINITIONAL_REPRESENTATION('',(#5554),#5560);+#5554 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#5555,#5556,#5557,#5558,#5559),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5555 = CARTESIAN_POINT('',(2.68352841665,0.355698547846));+#5556 = CARTESIAN_POINT('',(2.694075256832,0.34151018464));+#5557 = CARTESIAN_POINT('',(2.700540740276,0.327377012059));+#5558 = CARTESIAN_POINT('',(2.702907705991,0.313304887494));+#5559 = CARTESIAN_POINT('',(2.701178636731,0.299299420834));+#5560 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5561 = PCURVE('',#5562,#5569);+#5562 = SURFACE_OF_LINEAR_EXTRUSION('',#5563,#5567);+#5563 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#5564,#5565,#5566),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5564 = CARTESIAN_POINT('',(-0.308832135525,-8.623234952967E-02,+ 1.8000001));+#5565 = CARTESIAN_POINT('',(-0.329244278063,-0.105713411882,1.8000001));+#5566 = CARTESIAN_POINT('',(-0.364625325129,-0.105713411882,1.8000001));+#5567 = VECTOR('',#5568,1.);+#5568 = DIRECTION('',(0.,0.,1.));+#5569 = DEFINITIONAL_REPRESENTATION('',(#5570),#5576);+#5570 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#5571,#5572,#5573,#5574,#5575),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5571 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#5572 = CARTESIAN_POINT('',(0.750163469534,-5.00001E-02));+#5573 = CARTESIAN_POINT('',(0.500151429162,-5.00001E-02));+#5574 = CARTESIAN_POINT('',(0.250063382233,-5.00001E-02));+#5575 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#5576 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5577 = ORIENTED_EDGE('',*,*,#5578,.T.);+#5578 = EDGE_CURVE('',#5543,#5579,#5581,.T.);+#5579 = VERTEX_POINT('',#5580);+#5580 = CARTESIAN_POINT('',(-0.288419992987,-3.294591427213E-02,1.75));+#5581 = SURFACE_CURVE('',#5582,(#5591,#5603),.PCURVE_S1.);+#5582 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#5583,#5584,#5585,#5586,#5587,+ #5588,#5589,#5590),.UNSPECIFIED.,.F.,.F.,(5,3,5),(0.,0.221960178695,+ 1.),.UNSPECIFIED.);+#5583 = CARTESIAN_POINT('',(-0.308832135525,-8.623234952967E-02,1.75));+#5584 = CARTESIAN_POINT('',(-0.306566479548,-8.407003926448E-02,1.75));+#5585 = CARTESIAN_POINT('',(-0.304468383331,-8.178999086139E-02,1.75));+#5586 = CARTESIAN_POINT('',(-0.302537923632,-7.939222684317E-02,1.75));+#5587 = CARTESIAN_POINT('',(-0.29459601544,-6.805943582643E-02,1.75));+#5588 = CARTESIAN_POINT('',(-0.290477121588,-5.779630434876E-02,1.75));+#5589 = CARTESIAN_POINT('',(-0.288419992987,-4.608962349474E-02,1.75));+#5590 = CARTESIAN_POINT('',(-0.288419992987,-3.294591427213E-02,1.75));+#5591 = PCURVE('',#2438,#5592);+#5592 = DEFINITIONAL_REPRESENTATION('',(#5593),#5602);+#5593 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#5594,#5595,#5596,#5597,#5598,+ #5599,#5600,#5601),.UNSPECIFIED.,.F.,.F.,(5,3,5),(0.,0.221960178695,+ 1.),.UNSPECIFIED.);+#5594 = CARTESIAN_POINT('',(2.701178636731,0.299299420834));+#5595 = CARTESIAN_POINT('',(2.700794896204,0.296191121316));+#5596 = CARTESIAN_POINT('',(2.700216702032,0.293147058249));+#5597 = CARTESIAN_POINT('',(2.699444026497,0.290167306673));+#5598 = CARTESIAN_POINT('',(2.695086771563,0.277032605024));+#5599 = CARTESIAN_POINT('',(2.689307260525,0.267604222001));+#5600 = CARTESIAN_POINT('',(2.681139219799,0.258969335469));+#5601 = CARTESIAN_POINT('',(2.670590648977,0.251128114534));+#5602 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5603 = PCURVE('',#5604,#5611);+#5604 = SURFACE_OF_LINEAR_EXTRUSION('',#5605,#5609);+#5605 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#5606,#5607,#5608),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5606 = CARTESIAN_POINT('',(-0.288419992987,-3.294591427213E-02,+ 1.8000001));+#5607 = CARTESIAN_POINT('',(-0.288419992987,-6.675128717745E-02,+ 1.8000001));+#5608 = CARTESIAN_POINT('',(-0.308832135525,-8.623234952967E-02,+ 1.8000001));+#5609 = VECTOR('',#5610,1.);+#5610 = DIRECTION('',(0.,0.,1.));+#5611 = DEFINITIONAL_REPRESENTATION('',(#5612),#5621);+#5612 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#5613,#5614,#5615,#5616,#5617,+ #5618,#5619,#5620),.UNSPECIFIED.,.F.,.F.,(5,3,5),(0.,0.221960178695,+ 1.),.UNSPECIFIED.);+#5613 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#5614 = CARTESIAN_POINT('',(0.944502249772,-5.00001E-02));+#5615 = CARTESIAN_POINT('',(0.88900224632,-5.00001E-02));+#5616 = CARTESIAN_POINT('',(0.833501119485,-5.00001E-02));+#5617 = CARTESIAN_POINT('',(0.583451223997,-5.00001E-02));+#5618 = CARTESIAN_POINT('',(0.388902515126,-5.00001E-02));+#5619 = CARTESIAN_POINT('',(0.194402665804,-5.00001E-02));+#5620 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#5621 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5622 = ORIENTED_EDGE('',*,*,#5623,.T.);+#5623 = EDGE_CURVE('',#5579,#5624,#5626,.T.);+#5624 = VERTEX_POINT('',#5625);+#5625 = CARTESIAN_POINT('',(-0.307901055339,2.019727787987E-02,1.75));+#5626 = SURFACE_CURVE('',#5627,(#5633,#5642),.PCURVE_S1.);+#5627 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#5628,#5629,#5630,#5631,#5632),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5628 = CARTESIAN_POINT('',(-0.288419992987,-3.294591427213E-02,1.75));+#5629 = CARTESIAN_POINT('',(-0.288419992987,-1.619564690751E-02,1.75));+#5630 = CARTESIAN_POINT('',(-0.291663278902,-1.748251423829E-03,1.75));+#5631 = CARTESIAN_POINT('',(-0.298158893244,1.038348224004E-02,1.75));+#5632 = CARTESIAN_POINT('',(-0.307901055339,2.019727787987E-02,1.75));+#5633 = PCURVE('',#2438,#5634);+#5634 = DEFINITIONAL_REPRESENTATION('',(#5635),#5641);+#5635 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#5636,#5637,#5638,#5639,#5640),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5636 = CARTESIAN_POINT('',(2.670590648977,0.251128114534));+#5637 = CARTESIAN_POINT('',(2.657147611051,0.241135307717));+#5638 = CARTESIAN_POINT('',(2.643617891788,0.235119259475));+#5639 = CARTESIAN_POINT('',(2.630006361292,0.233094857108));+#5640 = CARTESIAN_POINT('',(2.616318294959,0.235058819225));+#5641 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5642 = PCURVE('',#5643,#5650);+#5643 = SURFACE_OF_LINEAR_EXTRUSION('',#5644,#5648);+#5644 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#5645,#5646,#5647),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5645 = CARTESIAN_POINT('',(-0.307901055339,2.019727787987E-02,1.8000001+ ));+#5646 = CARTESIAN_POINT('',(-0.288419992987,5.72972422124E-04,1.8000001)+ );+#5647 = CARTESIAN_POINT('',(-0.288419992987,-3.294591427213E-02,+ 1.8000001));+#5648 = VECTOR('',#5649,1.);+#5649 = DIRECTION('',(0.,0.,1.));+#5650 = DEFINITIONAL_REPRESENTATION('',(#5651),#5657);+#5651 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#5652,#5653,#5654,#5655,#5656),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5652 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#5653 = CARTESIAN_POINT('',(0.750136877794,-5.00001E-02));+#5654 = CARTESIAN_POINT('',(0.500119303818,-5.00001E-02));+#5655 = CARTESIAN_POINT('',(0.250041859085,-5.00001E-02));+#5656 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#5657 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5658 = ORIENTED_EDGE('',*,*,#5659,.T.);+#5659 = EDGE_CURVE('',#5624,#5660,#5662,.T.);+#5660 = VERTEX_POINT('',#5661);+#5661 = CARTESIAN_POINT('',(-0.360614518174,3.982158333762E-02,1.75));+#5662 = SURFACE_CURVE('',#5663,(#5672,#5684),.PCURVE_S1.);+#5663 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#5664,#5665,#5666,#5667,#5668,+ #5669,#5670,#5671),.UNSPECIFIED.,.F.,.F.,(5,3,5),(0.,0.202963550181,+ 1.),.UNSPECIFIED.);+#5664 = CARTESIAN_POINT('',(-0.307901055339,2.019727787987E-02,1.75));+#5665 = CARTESIAN_POINT('',(-0.309878320447,2.218908170181E-02,1.75));+#5666 = CARTESIAN_POINT('',(-0.311950088588,2.404617407667E-02,1.75));+#5667 = CARTESIAN_POINT('',(-0.314116342114,2.576850449866E-02,1.75));+#5668 = CARTESIAN_POINT('',(-0.325254812204,3.359031975579E-02,1.75));+#5669 = CARTESIAN_POINT('',(-0.335589118705,3.774600321807E-02,1.75));+#5670 = CARTESIAN_POINT('',(-0.347377807026,3.982158333762E-02,1.75));+#5671 = CARTESIAN_POINT('',(-0.360614518174,3.982158333762E-02,1.75));+#5672 = PCURVE('',#2438,#5673);+#5673 = DEFINITIONAL_REPRESENTATION('',(#5674),#5683);+#5674 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#5675,#5676,#5677,#5678,#5679,+ #5680,#5681,#5682),.UNSPECIFIED.,.F.,.F.,(5,3,5),(0.,0.202963550181,+ 1.),.UNSPECIFIED.);+#5675 = CARTESIAN_POINT('',(2.616318294959,0.235058819225));+#5676 = CARTESIAN_POINT('',(2.613540170792,0.235457424147));+#5677 = CARTESIAN_POINT('',(2.61081378195,0.236012238715));+#5678 = CARTESIAN_POINT('',(2.608139179497,0.236723278895));+#5679 = CARTESIAN_POINT('',(2.595216786421,0.240996224842));+#5680 = CARTESIAN_POINT('',(2.585716416344,0.246810910069));+#5681 = CARTESIAN_POINT('',(2.577017797742,0.255033758698));+#5682 = CARTESIAN_POINT('',(2.569121094094,0.265656968831));+#5683 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5684 = PCURVE('',#5685,#5692);+#5685 = SURFACE_OF_LINEAR_EXTRUSION('',#5686,#5690);+#5686 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#5687,#5688,#5689),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5687 = CARTESIAN_POINT('',(-0.360614518174,3.982158333762E-02,1.8000001+ ));+#5688 = CARTESIAN_POINT('',(-0.327382117691,3.982158333762E-02,1.8000001+ ));+#5689 = CARTESIAN_POINT('',(-0.307901055339,2.019727787987E-02,1.8000001+ ));+#5690 = VECTOR('',#5691,1.);+#5691 = DIRECTION('',(0.,0.,1.));+#5692 = DEFINITIONAL_REPRESENTATION('',(#5693),#5702);+#5693 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#5694,#5695,#5696,#5697,#5698,+ #5699,#5700,#5701),.UNSPECIFIED.,.F.,.F.,(5,3,5),(0.,0.202963550181,+ 1.),.UNSPECIFIED.);+#5694 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#5695 = CARTESIAN_POINT('',(0.94925160979,-5.00001E-02));+#5696 = CARTESIAN_POINT('',(0.898501614354,-5.00001E-02));+#5697 = CARTESIAN_POINT('',(0.847750811712,-5.00001E-02));+#5698 = CARTESIAN_POINT('',(0.59770191541,-5.00001E-02));+#5699 = CARTESIAN_POINT('',(0.398403669162,-5.00001E-02));+#5700 = CARTESIAN_POINT('',(0.199153701744,-5.00001E-02));+#5701 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#5702 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5703 = ORIENTED_EDGE('',*,*,#5704,.T.);+#5704 = EDGE_CURVE('',#5660,#5705,#5707,.T.);+#5705 = VERTEX_POINT('',#5706);+#5706 = CARTESIAN_POINT('',(-0.373148289908,3.874726004614E-02,1.75));+#5707 = SURFACE_CURVE('',#5708,(#5714,#5723),.PCURVE_S1.);+#5708 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#5709,#5710,#5711,#5712,#5713),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5709 = CARTESIAN_POINT('',(-0.360614518174,3.982158333762E-02,1.75));+#5710 = CARTESIAN_POINT('',(-0.363765866087,3.982158333762E-02,1.75));+#5711 = CARTESIAN_POINT('',(-0.366905278973,3.964252950223E-02,1.75));+#5712 = CARTESIAN_POINT('',(-0.370032754366,3.928442134658E-02,1.75));+#5713 = CARTESIAN_POINT('',(-0.373148289908,3.874726004614E-02,1.75));+#5714 = PCURVE('',#2438,#5715);+#5715 = DEFINITIONAL_REPRESENTATION('',(#5716),#5722);+#5716 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#5717,#5718,#5719,#5720,#5721),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5717 = CARTESIAN_POINT('',(2.569121094094,0.265656968831));+#5718 = CARTESIAN_POINT('',(2.567241075691,0.268186103953));+#5719 = CARTESIAN_POINT('',(2.565511878278,0.270812479755));+#5720 = CARTESIAN_POINT('',(2.563933503716,0.273536094546));+#5721 = CARTESIAN_POINT('',(2.562505952468,0.276356945732));+#5722 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5723 = PCURVE('',#5724,#5731);+#5724 = SURFACE_OF_LINEAR_EXTRUSION('',#5725,#5729);+#5725 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#5726,#5727,#5728),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5726 = CARTESIAN_POINT('',(-0.373148289908,3.874726004614E-02,1.8000001+ ));+#5727 = CARTESIAN_POINT('',(-0.366917214818,3.982158333762E-02,1.8000001+ ));+#5728 = CARTESIAN_POINT('',(-0.360614518174,3.982158333762E-02,1.8000001+ ));+#5729 = VECTOR('',#5730,1.);+#5730 = DIRECTION('',(0.,0.,1.));+#5731 = DEFINITIONAL_REPRESENTATION('',(#5732),#5738);+#5732 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#5733,#5734,#5735,#5736,#5737),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5733 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#5734 = CARTESIAN_POINT('',(0.750000032482,-5.00001E-02));+#5735 = CARTESIAN_POINT('',(0.499999914517,-5.00001E-02));+#5736 = CARTESIAN_POINT('',(0.249999839296,-5.00001E-02));+#5737 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#5738 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5739 = ORIENTED_EDGE('',*,*,#5740,.T.);+#5740 = EDGE_CURVE('',#5705,#5741,#5743,.T.);+#5741 = VERTEX_POINT('',#5742);+#5742 = CARTESIAN_POINT('',(-0.385538818537,3.538104706616E-02,1.75));+#5743 = SURFACE_CURVE('',#5744,(#5750,#5759),.PCURVE_S1.);+#5744 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#5745,#5746,#5747,#5748,#5749),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5745 = CARTESIAN_POINT('',(-0.373148289908,3.874726004614E-02,1.75));+#5746 = CARTESIAN_POINT('',(-0.376263835912,3.821009694208E-02,1.75));+#5747 = CARTESIAN_POINT('',(-0.379367441346,3.747000562047E-02,1.75));+#5748 = CARTESIAN_POINT('',(-0.382459103182,3.652698766308E-02,1.75));+#5749 = CARTESIAN_POINT('',(-0.385538818537,3.538104706616E-02,1.75));+#5750 = PCURVE('',#2438,#5751);+#5751 = DEFINITIONAL_REPRESENTATION('',(#5752),#5758);+#5752 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#5753,#5754,#5755,#5756,#5757),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5753 = CARTESIAN_POINT('',(2.562505952468,0.276356945732));+#5754 = CARTESIAN_POINT('',(2.561078396427,0.27917780639));+#5755 = CARTESIAN_POINT('',(2.559820825227,0.28211014616));+#5756 = CARTESIAN_POINT('',(2.558733239404,0.28515396167));+#5757 = CARTESIAN_POINT('',(2.557815637473,0.28830924822));+#5758 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5759 = PCURVE('',#5760,#5767);+#5760 = SURFACE_OF_LINEAR_EXTRUSION('',#5761,#5765);+#5761 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#5762,#5763,#5764),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5762 = CARTESIAN_POINT('',(-0.385538818537,3.538104706616E-02,1.8000001+ ));+#5763 = CARTESIAN_POINT('',(-0.379379364999,3.767293675465E-02,1.8000001+ ));+#5764 = CARTESIAN_POINT('',(-0.373148289908,3.874726004614E-02,1.8000001+ ));+#5765 = VECTOR('',#5766,1.);+#5766 = DIRECTION('',(0.,0.,1.));+#5767 = DEFINITIONAL_REPRESENTATION('',(#5768),#5774);+#5768 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#5769,#5770,#5771,#5772,#5773),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5769 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#5770 = CARTESIAN_POINT('',(0.749999321287,-5.00001E-02));+#5771 = CARTESIAN_POINT('',(0.499998929789,-5.00001E-02));+#5772 = CARTESIAN_POINT('',(0.249999073401,-5.00001E-02));+#5773 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#5774 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5775 = ORIENTED_EDGE('',*,*,#5776,.T.);+#5776 = EDGE_CURVE('',#5741,#5777,#5779,.T.);+#5777 = VERTEX_POINT('',#5778);+#5778 = CARTESIAN_POINT('',(-0.385538818537,8.795126679604E-02,1.75));+#5779 = SURFACE_CURVE('',#5780,(#5784,#5791),.PCURVE_S1.);+#5780 = LINE('',#5781,#5782);+#5781 = CARTESIAN_POINT('',(-0.385538818537,1.174061273781,1.75));+#5782 = VECTOR('',#5783,1.);+#5783 = DIRECTION('',(0.,1.,0.));+#5784 = PCURVE('',#2438,#5785);+#5785 = DEFINITIONAL_REPRESENTATION('',(#5786),#5790);+#5786 = LINE('',#5787,#5788);+#5787 = CARTESIAN_POINT('',(1.643960285757,-0.391000000097));+#5788 = VECTOR('',#5789,1.);+#5789 = DIRECTION('',(-0.802556617983,-0.596575959062));+#5790 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5791 = PCURVE('',#5792,#5797);+#5792 = PLANE('',#5793);+#5793 = AXIS2_PLACEMENT_3D('',#5794,#5795,#5796);+#5794 = CARTESIAN_POINT('',(-0.385538818537,8.795126679604E-02,1.8000001+ ));+#5795 = DIRECTION('',(-1.,0.,0.));+#5796 = DIRECTION('',(0.,-1.,0.));+#5797 = DEFINITIONAL_REPRESENTATION('',(#5798),#5801);+#5798 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#5799,#5800),.UNSPECIFIED.,.F.,+ .F.,(2,2),(-1.138680226714,-1.086110006984),.PIECEWISE_BEZIER_KNOTS.);+#5799 = CARTESIAN_POINT('',(5.257021972988E-02,-5.00001E-02));+#5800 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#5801 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5802 = ORIENTED_EDGE('',*,*,#5803,.T.);+#5803 = EDGE_CURVE('',#5777,#5804,#5806,.T.);+#5804 = VERTEX_POINT('',#5805);+#5805 = CARTESIAN_POINT('',(-0.303603762173,8.795126679604E-02,1.75));+#5806 = SURFACE_CURVE('',#5807,(#5811,#5818),.PCURVE_S1.);+#5807 = LINE('',#5808,#5809);+#5808 = CARTESIAN_POINT('',(-0.991844701277,8.795126679604E-02,1.75));+#5809 = VECTOR('',#5810,1.);+#5810 = DIRECTION('',(1.,-0.,0.));+#5811 = PCURVE('',#2438,#5812);+#5812 = DEFINITIONAL_REPRESENTATION('',(#5813),#5817);+#5813 = LINE('',#5814,#5815);+#5814 = CARTESIAN_POINT('',(2.153917546239,0.743541917682));+#5815 = VECTOR('',#5816,1.);+#5816 = DIRECTION('',(0.596575959062,-0.802556617983));+#5817 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5818 = PCURVE('',#5819,#5824);+#5819 = PLANE('',#5820);+#5820 = AXIS2_PLACEMENT_3D('',#5821,#5822,#5823);+#5821 = CARTESIAN_POINT('',(-0.303603762173,8.795126679604E-02,1.8000001+ ));+#5822 = DIRECTION('',(0.,1.,0.));+#5823 = DIRECTION('',(-1.,0.,0.));+#5824 = DEFINITIONAL_REPRESENTATION('',(#5825),#5828);+#5825 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#5826,#5827),.UNSPECIFIED.,.F.,+ .F.,(2,2),(0.606305882741,0.688240939105),.PIECEWISE_BEZIER_KNOTS.);+#5826 = CARTESIAN_POINT('',(8.193505636374E-02,-5.00001E-02));+#5827 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#5828 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5829 = ORIENTED_EDGE('',*,*,#5830,.T.);+#5830 = EDGE_CURVE('',#5804,#5091,#5831,.T.);+#5831 = SURFACE_CURVE('',#5832,(#5836,#5843),.PCURVE_S1.);+#5832 = LINE('',#5833,#5834);+#5833 = CARTESIAN_POINT('',(-0.303603762173,1.186236937751,1.75));+#5834 = VECTOR('',#5835,1.);+#5835 = DIRECTION('',(0.,1.,0.));+#5836 = PCURVE('',#2438,#5837);+#5837 = DEFINITIONAL_REPRESENTATION('',(#5838),#5842);+#5838 = LINE('',#5839,#5840);+#5839 = CARTESIAN_POINT('',(1.68306911089,-0.464021230237));+#5840 = VECTOR('',#5841,1.);+#5841 = DIRECTION('',(-0.802556617983,-0.596575959062));+#5842 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5843 = PCURVE('',#5844,#5849);+#5844 = PLANE('',#5845);+#5845 = AXIS2_PLACEMENT_3D('',#5846,#5847,#5848);+#5846 = CARTESIAN_POINT('',(-0.303603762173,0.112302594736,1.8000001));+#5847 = DIRECTION('',(-1.,0.,0.));+#5848 = DIRECTION('',(0.,-1.,0.));+#5849 = DEFINITIONAL_REPRESENTATION('',(#5850),#5853);+#5850 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#5851,#5852),.UNSPECIFIED.,.F.,+ .F.,(2,2),(-1.098285670955,-1.073934343014),.PIECEWISE_BEZIER_KNOTS.);+#5851 = CARTESIAN_POINT('',(2.435132794027E-02,-5.00001E-02));+#5852 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#5853 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5854 = FACE_BOUND('',#5855,.F.);+#5855 = EDGE_LOOP('',(#5856,#5894,#5921,#5957,#5993,#6038,#6074,#6110,+ #6155,#6191,#6227,#6263,#6308,#6344,#6380,#6416,#6461));+#5856 = ORIENTED_EDGE('',*,*,#5857,.T.);+#5857 = EDGE_CURVE('',#5858,#5860,#5862,.T.);+#5858 = VERTEX_POINT('',#5859);+#5859 = CARTESIAN_POINT('',(-0.495406280479,8.902559008752E-02,1.75));+#5860 = VERTEX_POINT('',#5861);+#5861 = CARTESIAN_POINT('',(-0.476211704338,8.093235462502E-02,1.75));+#5862 = SURFACE_CURVE('',#5863,(#5869,#5878),.PCURVE_S1.);+#5863 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#5864,#5865,#5866,#5867,#5868),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5864 = CARTESIAN_POINT('',(-0.495406280479,8.902559008752E-02,1.75));+#5865 = CARTESIAN_POINT('',(-0.490321171787,8.762897572836E-02,1.75));+#5866 = CARTESIAN_POINT('',(-0.485427020751,8.581456385974E-02,1.75));+#5867 = CARTESIAN_POINT('',(-0.480723858445,8.358234989414E-02,1.75));+#5868 = CARTESIAN_POINT('',(-0.476211704338,8.093235462502E-02,1.75));+#5869 = PCURVE('',#2438,#5870);+#5870 = DEFINITIONAL_REPRESENTATION('',(#5871),#5877);+#5871 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#5872,#5873,#5874,#5875,#5876),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5872 = CARTESIAN_POINT('',(2.449218567975,0.344481062201));+#5873 = CARTESIAN_POINT('',(2.453373083667,0.341233161118));+#5874 = CARTESIAN_POINT('',(2.457748984767,0.338387762316));+#5875 = CARTESIAN_POINT('',(2.462346256422,0.335944893469));+#5876 = CARTESIAN_POINT('',(2.467164870326,0.333904557798));+#5877 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5878 = PCURVE('',#5879,#5886);+#5879 = SURFACE_OF_LINEAR_EXTRUSION('',#5880,#5884);+#5880 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#5881,#5882,#5883),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5881 = CARTESIAN_POINT('',(-0.476211704338,8.093235462502E-02,1.8000001+ ));+#5882 = CARTESIAN_POINT('',(-0.485236019986,8.623234952967E-02,1.8000001+ ));+#5883 = CARTESIAN_POINT('',(-0.495406280479,8.902559008752E-02,1.8000001+ ));+#5884 = VECTOR('',#5885,1.);+#5885 = DIRECTION('',(0.,0.,1.));+#5886 = DEFINITIONAL_REPRESENTATION('',(#5887),#5893);+#5887 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#5888,#5889,#5890,#5891,#5892),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5888 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#5889 = CARTESIAN_POINT('',(0.750001059659,-5.00001E-02));+#5890 = CARTESIAN_POINT('',(0.500000569134,-5.00001E-02));+#5891 = CARTESIAN_POINT('',(0.249999794037,-5.00001E-02));+#5892 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#5893 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5894 = ORIENTED_EDGE('',*,*,#5895,.T.);+#5895 = EDGE_CURVE('',#5860,#5896,#5898,.T.);+#5896 = VERTEX_POINT('',#5897);+#5897 = CARTESIAN_POINT('',(-0.476211704338,0.107575572254,1.75));+#5898 = SURFACE_CURVE('',#5899,(#5903,#5910),.PCURVE_S1.);+#5899 = LINE('',#5900,#5901);+#5900 = CARTESIAN_POINT('',(-0.476211704338,1.183873426509,1.75));+#5901 = VECTOR('',#5902,1.);+#5902 = DIRECTION('',(0.,1.,0.));+#5903 = PCURVE('',#2438,#5904);+#5904 = DEFINITIONAL_REPRESENTATION('',(#5905),#5909);+#5905 = LINE('',#5906,#5907);+#5906 = CARTESIAN_POINT('',(1.58199221384,-0.324083569951));+#5907 = VECTOR('',#5908,1.);+#5908 = DIRECTION('',(-0.802556617983,-0.596575959062));+#5909 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5910 = PCURVE('',#5911,#5916);+#5911 = PLANE('',#5912);+#5912 = AXIS2_PLACEMENT_3D('',#5913,#5914,#5915);+#5913 = CARTESIAN_POINT('',(-0.476211704338,0.107575572254,1.8000001));+#5914 = DIRECTION('',(-1.,0.,0.));+#5915 = DIRECTION('',(0.,-1.,0.));+#5916 = DEFINITIONAL_REPRESENTATION('',(#5917),#5920);+#5917 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#5918,#5919),.UNSPECIFIED.,.F.,+ .F.,(2,2),(-1.102941071884,-1.076297854256),.PIECEWISE_BEZIER_KNOTS.);+#5918 = CARTESIAN_POINT('',(2.664321762877E-02,-5.00001E-02));+#5919 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#5920 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5921 = ORIENTED_EDGE('',*,*,#5922,.T.);+#5922 = EDGE_CURVE('',#5896,#5923,#5925,.T.);+#5923 = VERTEX_POINT('',#5924);+#5924 = CARTESIAN_POINT('',(-0.496695468429,0.11394989045,1.75));+#5925 = SURFACE_CURVE('',#5926,(#5932,#5941),.PCURVE_S1.);+#5926 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#5927,#5928,#5929,#5930,#5931),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5927 = CARTESIAN_POINT('',(-0.476211704338,0.107575572254,1.75));+#5928 = CARTESIAN_POINT('',(-0.481153596057,0.109652599208,1.75));+#5929 = CARTESIAN_POINT('',(-0.486214863535,0.111407331219,1.75));+#5930 = CARTESIAN_POINT('',(-0.491395493452,0.112839760556,1.75));+#5931 = CARTESIAN_POINT('',(-0.496695468429,0.11394989045,1.75));+#5932 = PCURVE('',#2438,#5933);+#5933 = DEFINITIONAL_REPRESENTATION('',(#5934),#5940);+#5934 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#5935,#5936,#5937,#5938,#5939),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5935 = CARTESIAN_POINT('',(2.445782179694,0.318009854688));+#5936 = CARTESIAN_POINT('',(2.441167034174,0.320736898245));+#5937 = CARTESIAN_POINT('',(2.436739331886,0.323752021023));+#5938 = CARTESIAN_POINT('',(2.432499086981,0.327055216943));+#5939 = CARTESIAN_POINT('',(2.428446307233,0.33064647013));+#5940 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5941 = PCURVE('',#5942,#5949);+#5942 = SURFACE_OF_LINEAR_EXTRUSION('',#5943,#5947);+#5943 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#5944,#5945,#5946),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5944 = CARTESIAN_POINT('',(-0.496695468429,0.11394989045,1.8000001));+#5945 = CARTESIAN_POINT('',(-0.486095478619,0.111729622314,1.8000001));+#5946 = CARTESIAN_POINT('',(-0.476211704338,0.107575572254,1.8000001));+#5947 = VECTOR('',#5948,1.);+#5948 = DIRECTION('',(0.,0.,1.));+#5949 = DEFINITIONAL_REPRESENTATION('',(#5950),#5956);+#5950 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#5951,#5952,#5953,#5954,#5955),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5951 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#5952 = CARTESIAN_POINT('',(0.749999768411,-5.00001E-02));+#5953 = CARTESIAN_POINT('',(0.49999921894,-5.00001E-02));+#5954 = CARTESIAN_POINT('',(0.24999906,-5.00001E-02));+#5955 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#5956 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5957 = ORIENTED_EDGE('',*,*,#5958,.T.);+#5958 = EDGE_CURVE('',#5923,#5959,#5961,.T.);+#5959 = VERTEX_POINT('',#5960);+#5960 = CARTESIAN_POINT('',(-0.517895448047,0.116170158586,1.75));+#5961 = SURFACE_CURVE('',#5962,(#5968,#5977),.PCURVE_S1.);+#5962 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#5963,#5964,#5965,#5966,#5967),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5963 = CARTESIAN_POINT('',(-0.496695468429,0.11394989045,1.75));+#5964 = CARTESIAN_POINT('',(-0.501995428514,0.115060017224,1.75));+#5965 = CARTESIAN_POINT('',(-0.507295423418,0.115800111465,1.75));+#5966 = CARTESIAN_POINT('',(-0.512595435733,0.116170158586,1.75));+#5967 = CARTESIAN_POINT('',(-0.517895448047,0.116170158586,1.75));+#5968 = PCURVE('',#2438,#5969);+#5969 = DEFINITIONAL_REPRESENTATION('',(#5970),#5976);+#5970 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#5971,#5972,#5973,#5974,#5975),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5971 = CARTESIAN_POINT('',(2.428446307233,0.33064647013));+#5972 = CARTESIAN_POINT('',(2.424393538872,0.334237713226));+#5973 = CARTESIAN_POINT('',(2.420637721798,0.33804973678));+#5974 = CARTESIAN_POINT('',(2.417178878103,0.342082535523));+#5975 = CARTESIAN_POINT('',(2.414017018174,0.346336095481));+#5976 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5977 = PCURVE('',#5978,#5985);+#5978 = SURFACE_OF_LINEAR_EXTRUSION('',#5979,#5983);+#5979 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#5980,#5981,#5982),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5980 = CARTESIAN_POINT('',(-0.517895448047,0.116170158586,1.8000001));+#5981 = CARTESIAN_POINT('',(-0.507295458238,0.116170158586,1.8000001));+#5982 = CARTESIAN_POINT('',(-0.496695468429,0.11394989045,1.8000001));+#5983 = VECTOR('',#5984,1.);+#5984 = DIRECTION('',(0.,0.,1.));+#5985 = DEFINITIONAL_REPRESENTATION('',(#5986),#5992);+#5986 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#5987,#5988,#5989,#5990,#5991),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5987 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#5988 = CARTESIAN_POINT('',(0.750001642433,-5.00001E-02));+#5989 = CARTESIAN_POINT('',(0.500001642459,-5.00001E-02));+#5990 = CARTESIAN_POINT('',(0.250000821223,-5.00001E-02));+#5991 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#5992 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5993 = ORIENTED_EDGE('',*,*,#5994,.T.);+#5994 = EDGE_CURVE('',#5959,#5995,#5997,.T.);+#5995 = VERTEX_POINT('',#5996);+#5996 = CARTESIAN_POINT('',(-0.578272417029,8.773640213774E-02,1.75));+#5997 = SURFACE_CURVE('',#5998,(#6007,#6019),.PCURVE_S1.);+#5998 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#5999,#6000,#6001,#6002,#6003,+ #6004,#6005,#6006),.UNSPECIFIED.,.F.,.F.,(5,3,5),(0.,0.639048852817,+ 1.),.UNSPECIFIED.);+#5999 = CARTESIAN_POINT('',(-0.517895448047,0.116170158586,1.75));+#6000 = CARTESIAN_POINT('',(-0.530519008727,0.116170158586,1.75));+#6001 = CARTESIAN_POINT('',(-0.541879919481,0.114237564647,1.75));+#6002 = CARTESIAN_POINT('',(-0.551970664806,0.110366923335,1.75));+#6003 = CARTESIAN_POINT('',(-0.565768985379,0.10128019297,1.75));+#6004 = CARTESIAN_POINT('',(-0.570343401171,9.738261806332E-02,1.75));+#6005 = CARTESIAN_POINT('',(-0.574511214775,9.286766431904E-02,1.75));+#6006 = CARTESIAN_POINT('',(-0.578272417029,8.773640213774E-02,1.75));+#6007 = PCURVE('',#2438,#6008);+#6008 = DEFINITIONAL_REPRESENTATION('',(#6009),#6018);+#6009 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#6010,#6011,#6012,#6013,#6014,+ #6015,#6016,#6017),.UNSPECIFIED.,.F.,.F.,(5,3,5),(0.,0.639048852817,+ 1.),.UNSPECIFIED.);+#6010 = CARTESIAN_POINT('',(2.414017018174,0.346336095481));+#6011 = CARTESIAN_POINT('',(2.406486105354,0.356467217647));+#6012 = CARTESIAN_POINT('',(2.40125947518,0.366737930842));+#6013 = CARTESIAN_POINT('',(2.398345987912,0.377145456835));+#6014 = CARTESIAN_POINT('',(2.397406857173,0.393640315211));+#6015 = CARTESIAN_POINT('',(2.39780589522,0.399636742366));+#6016 = CARTESIAN_POINT('',(2.398942983829,0.405675161616));+#6017 = CARTESIAN_POINT('',(2.40081726941,0.411754927034));+#6018 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6019 = PCURVE('',#6020,#6027);+#6020 = SURFACE_OF_LINEAR_EXTRUSION('',#6021,#6025);+#6021 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#6022,#6023,#6024),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6022 = CARTESIAN_POINT('',(-0.578272417029,8.773640213774E-02,1.8000001+ ));+#6023 = CARTESIAN_POINT('',(-0.557430545174,0.116170158586,1.8000001));+#6024 = CARTESIAN_POINT('',(-0.517895448047,0.116170158586,1.8000001));+#6025 = VECTOR('',#6026,1.);+#6026 = DIRECTION('',(0.,0.,1.));+#6027 = DEFINITIONAL_REPRESENTATION('',(#6028),#6037);+#6028 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#6029,#6030,#6031,#6032,#6033,+ #6034,#6035,#6036),.UNSPECIFIED.,.F.,.F.,(5,3,5),(0.,0.639048852817,+ 1.),.UNSPECIFIED.);+#6029 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#6030 = CARTESIAN_POINT('',(0.8403499473,-5.00001E-02));+#6031 = CARTESIAN_POINT('',(0.680600024861,-5.00001E-02));+#6032 = CARTESIAN_POINT('',(0.520799938505,-5.00001E-02));+#6033 = CARTESIAN_POINT('',(0.270740904989,-5.00001E-02));+#6034 = CARTESIAN_POINT('',(0.180481846223,-5.00001E-02));+#6035 = CARTESIAN_POINT('',(9.023187264589E-02,-5.00001E-02));+#6036 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#6037 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6038 = ORIENTED_EDGE('',*,*,#6039,.T.);+#6039 = EDGE_CURVE('',#5995,#6040,#6042,.T.);+#6040 = VERTEX_POINT('',#6041);+#6041 = CARTESIAN_POINT('',(-0.599114288883,5.156751799116E-03,1.75));+#6042 = SURFACE_CURVE('',#6043,(#6049,#6058),.PCURVE_S1.);+#6043 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#6044,#6045,#6046,#6047,#6048),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6044 = CARTESIAN_POINT('',(-0.578272417029,8.773640213774E-02,1.75));+#6045 = CARTESIAN_POINT('',(-0.588707063777,7.350081877364E-02,1.75));+#6046 = CARTESIAN_POINT('',(-0.595654784815,5.497415536124E-02,1.75));+#6047 = CARTESIAN_POINT('',(-0.599114288883,3.21746594784E-02,1.75));+#6048 = CARTESIAN_POINT('',(-0.599114288883,5.156751799116E-03,1.75));+#6049 = PCURVE('',#2438,#6050);+#6050 = DEFINITIONAL_REPRESENTATION('',(#6051),#6057);+#6051 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#6052,#6053,#6054,#6055,#6056),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6052 = CARTESIAN_POINT('',(2.40081726941,0.411754927034));+#6053 = CARTESIAN_POINT('',(2.406017071658,0.428621928636));+#6054 = CARTESIAN_POINT('',(2.416740924647,0.445250430129));+#6055 = CARTESIAN_POINT('',(2.432974953997,0.461628509136));+#6056 = CARTESIAN_POINT('',(2.454658354609,0.477746743322));+#6057 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6058 = PCURVE('',#6059,#6066);+#6059 = SURFACE_OF_LINEAR_EXTRUSION('',#6060,#6064);+#6060 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#6061,#6062,#6063),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6061 = CARTESIAN_POINT('',(-0.599114288883,5.156751799116E-03,1.8000001+ ));+#6062 = CARTESIAN_POINT('',(-0.599114288883,5.930264568984E-02,1.8000001+ ));+#6063 = CARTESIAN_POINT('',(-0.578272417029,8.773640213774E-02,1.8000001+ ));+#6064 = VECTOR('',#6065,1.);+#6065 = DIRECTION('',(0.,0.,1.));+#6066 = DEFINITIONAL_REPRESENTATION('',(#6067),#6073);+#6067 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#6068,#6069,#6070,#6071,#6072),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6068 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#6069 = CARTESIAN_POINT('',(0.749671075115,-5.00001E-02));+#6070 = CARTESIAN_POINT('',(0.499440587208,-5.00001E-02));+#6071 = CARTESIAN_POINT('',(0.249491750324,-5.00001E-02));+#6072 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#6073 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6074 = ORIENTED_EDGE('',*,*,#6075,.T.);+#6075 = EDGE_CURVE('',#6040,#6076,#6078,.T.);+#6076 = VERTEX_POINT('',#6077);+#6077 = CARTESIAN_POINT('',(-0.581781873114,-7.899857270035E-02,1.75));+#6078 = SURFACE_CURVE('',#6079,(#6085,#6094),.PCURVE_S1.);+#6079 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#6080,#6081,#6082,#6083,#6084),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6080 = CARTESIAN_POINT('',(-0.599114288883,5.156751799116E-03,1.75));+#6081 = CARTESIAN_POINT('',(-0.599114288883,-2.348681824661E-02,1.75));+#6082 = CARTESIAN_POINT('',(-0.596240996876,-4.710321196341E-02,1.75));+#6083 = CARTESIAN_POINT('',(-0.590464201315,-6.561630650707E-02,1.75));+#6084 = CARTESIAN_POINT('',(-0.581781873114,-7.899857270035E-02,1.75));+#6085 = PCURVE('',#2438,#6086);+#6086 = DEFINITIONAL_REPRESENTATION('',(#6087),#6093);+#6087 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#6088,#6089,#6090,#6091,#6092),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6088 = CARTESIAN_POINT('',(2.454658354609,0.477746743322));+#6089 = CARTESIAN_POINT('',(2.477646441312,0.494834808593));+#6090 = CARTESIAN_POINT('',(2.498314071317,0.506617801808));+#6091 = CARTESIAN_POINT('',(2.516618175215,0.513026063432));+#6092 = CARTESIAN_POINT('',(2.532537869785,0.514041541764));+#6093 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6094 = PCURVE('',#6095,#6102);+#6095 = SURFACE_OF_LINEAR_EXTRUSION('',#6096,#6100);+#6096 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#6097,#6098,#6099),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6097 = CARTESIAN_POINT('',(-0.581781873114,-7.899857270035E-02,+ 1.8000001));+#6098 = CARTESIAN_POINT('',(-0.599114288883,-5.228373351882E-02,+ 1.8000001));+#6099 = CARTESIAN_POINT('',(-0.599114288883,5.156751799116E-03,1.8000001+ ));+#6100 = VECTOR('',#6101,1.);+#6101 = DIRECTION('',(0.,0.,1.));+#6102 = DEFINITIONAL_REPRESENTATION('',(#6103),#6109);+#6103 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#6104,#6105,#6106,#6107,#6108),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6104 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#6105 = CARTESIAN_POINT('',(0.75066740917,-5.00001E-02));+#6106 = CARTESIAN_POINT('',(0.500756943917,-5.00001E-02));+#6107 = CARTESIAN_POINT('',(0.250465033728,-5.00001E-02));+#6108 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#6109 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6110 = ORIENTED_EDGE('',*,*,#6111,.T.);+#6111 = EDGE_CURVE('',#6076,#6112,#6114,.T.);+#6112 = VERTEX_POINT('',#6113);+#6113 = CARTESIAN_POINT('',(-0.527206249907,-0.105713411882,1.75));+#6114 = SURFACE_CURVE('',#6115,(#6124,#6136),.PCURVE_S1.);+#6115 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#6116,#6117,#6118,#6119,#6120,+ #6121,#6122,#6123),.UNSPECIFIED.,.F.,.F.,(5,3,5),(0.,0.329945590703,+ 1.),.UNSPECIFIED.);+#6116 = CARTESIAN_POINT('',(-0.581781873114,-7.899857270035E-02,1.75));+#6117 = CARTESIAN_POINT('',(-0.578922487891,-8.340580695002E-02,1.75));+#6118 = CARTESIAN_POINT('',(-0.575701377114,-8.732903581711E-02,1.75));+#6119 = CARTESIAN_POINT('',(-0.572118507216,-9.076755359767E-02,1.75));+#6120 = CARTESIAN_POINT('',(-0.560164070382,-9.971923247701E-02,1.75));+#6121 = CARTESIAN_POINT('',(-0.550663291637,-0.103717328951,1.75));+#6122 = CARTESIAN_POINT('',(-0.539674513758,-0.105713411882,1.75));+#6123 = CARTESIAN_POINT('',(-0.527206249907,-0.105713411882,1.75));+#6124 = PCURVE('',#2438,#6125);+#6125 = DEFINITIONAL_REPRESENTATION('',(#6126),#6135);+#6126 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#6127,#6128,#6129,#6130,#6131,+ #6132,#6133,#6134),.UNSPECIFIED.,.F.,.F.,(5,3,5),(0.,0.329945590703,+ 1.),.UNSPECIFIED.);+#6127 = CARTESIAN_POINT('',(2.532537869785,0.514041541764));+#6128 = CARTESIAN_POINT('',(2.537780765282,0.514375973229));+#6129 = CARTESIAN_POINT('',(2.542851015823,0.514131353482));+#6130 = CARTESIAN_POINT('',(2.54774807507,0.513307234577));+#6131 = CARTESIAN_POINT('',(2.562064033816,0.509053478594));+#6132 = CARTESIAN_POINT('',(2.570940668792,0.503813733974));+#6133 = CARTESIAN_POINT('',(2.57909827906,0.496185432653));+#6134 = CARTESIAN_POINT('',(2.586536545525,0.486178944984));+#6135 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6136 = PCURVE('',#6137,#6144);+#6137 = SURFACE_OF_LINEAR_EXTRUSION('',#6138,#6142);+#6138 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#6139,#6140,#6141),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6139 = CARTESIAN_POINT('',(-0.527206249907,-0.105713411882,1.8000001));+#6140 = CARTESIAN_POINT('',(-0.564449457345,-0.105713411882,1.8000001));+#6141 = CARTESIAN_POINT('',(-0.581781873114,-7.899857270035E-02,+ 1.8000001));+#6142 = VECTOR('',#6143,1.);+#6143 = DIRECTION('',(0.,0.,1.));+#6144 = DEFINITIONAL_REPRESENTATION('',(#6145),#6154);+#6145 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#6146,#6147,#6148,#6149,#6150,+ #6151,#6152,#6153),.UNSPECIFIED.,.F.,.F.,(5,3,5),(0.,0.329945590703,+ 1.),.UNSPECIFIED.);+#6146 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#6147 = CARTESIAN_POINT('',(0.917513367389,-5.00001E-02));+#6148 = CARTESIAN_POINT('',(0.835013412637,-5.00001E-02));+#6149 = CARTESIAN_POINT('',(0.752506746323,-5.00001E-02));+#6150 = CARTESIAN_POINT('',(0.502445073586,-5.00001E-02));+#6151 = CARTESIAN_POINT('',(0.334889777814,-5.00001E-02));+#6152 = CARTESIAN_POINT('',(0.167389769957,-5.00001E-02));+#6153 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#6154 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6155 = ORIENTED_EDGE('',*,*,#6156,.T.);+#6156 = EDGE_CURVE('',#6112,#6157,#6159,.T.);+#6157 = VERTEX_POINT('',#6158);+#6158 = CARTESIAN_POINT('',(-0.47807386471,-8.666207884626E-02,1.75));+#6159 = SURFACE_CURVE('',#6160,(#6166,#6175),.PCURVE_S1.);+#6160 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#6161,#6162,#6163,#6164,#6165),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6161 = CARTESIAN_POINT('',(-0.527206249907,-0.105713411882,1.75));+#6162 = CARTESIAN_POINT('',(-0.511386116464,-0.105713411882,1.75));+#6163 = CARTESIAN_POINT('',(-0.497917603807,-0.10254149373,1.75));+#6164 = CARTESIAN_POINT('',(-0.486812963853,-9.6189129552E-02,1.75));+#6165 = CARTESIAN_POINT('',(-0.47807386471,-8.666207884626E-02,1.75));+#6166 = PCURVE('',#2438,#6167);+#6167 = DEFINITIONAL_REPRESENTATION('',(#6168),#6174);+#6168 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#6169,#6170,#6171,#6172,#6173),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6169 = CARTESIAN_POINT('',(2.586536545525,0.486178944984));+#6170 = CARTESIAN_POINT('',(2.595974456807,0.473482392192));+#6171 = CARTESIAN_POINT('',(2.601463803758,0.460780858111));+#6172 = CARTESIAN_POINT('',(2.602990433077,0.448079088074));+#6173 = CARTESIAN_POINT('',(2.600557971936,0.43538185681));+#6174 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6175 = PCURVE('',#6176,#6183);+#6176 = SURFACE_OF_LINEAR_EXTRUSION('',#6177,#6181);+#6177 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#6178,#6179,#6180),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6178 = CARTESIAN_POINT('',(-0.47807386471,-8.666207884626E-02,1.8000001+ ));+#6179 = CARTESIAN_POINT('',(-0.495549523585,-0.105713411882,1.8000001));+#6180 = CARTESIAN_POINT('',(-0.527206249907,-0.105713411882,1.8000001));+#6181 = VECTOR('',#6182,1.);+#6182 = DIRECTION('',(0.,0.,1.));+#6183 = DEFINITIONAL_REPRESENTATION('',(#6184),#6190);+#6184 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#6185,#6186,#6187,#6188,#6189),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6185 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#6186 = CARTESIAN_POINT('',(0.750129983718,-5.00001E-02));+#6187 = CARTESIAN_POINT('',(0.500111009029,-5.00001E-02));+#6188 = CARTESIAN_POINT('',(0.25003632785,-5.00001E-02));+#6189 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#6190 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6191 = ORIENTED_EDGE('',*,*,#6192,.T.);+#6192 = EDGE_CURVE('',#6157,#6193,#6195,.T.);+#6193 = VERTEX_POINT('',#6194);+#6194 = CARTESIAN_POINT('',(-0.460598205835,-3.294591427213E-02,1.75));+#6195 = SURFACE_CURVE('',#6196,(#6202,#6211),.PCURVE_S1.);+#6196 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#6197,#6198,#6199,#6200,#6201),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6197 = CARTESIAN_POINT('',(-0.47807386471,-8.666207884626E-02,1.75));+#6198 = CARTESIAN_POINT('',(-0.46933298445,-7.713308643222E-02,1.75));+#6199 = CARTESIAN_POINT('',(-0.46350665781,-6.499992001211E-02,1.75));+#6200 = CARTESIAN_POINT('',(-0.460598205835,-5.026596717759E-02,1.75));+#6201 = CARTESIAN_POINT('',(-0.460598205835,-3.294591427213E-02,1.75));+#6202 = PCURVE('',#2438,#6203);+#6203 = DEFINITIONAL_REPRESENTATION('',(#6204),#6210);+#6204 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#6205,#6206,#6207,#6208,#6209),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6205 = CARTESIAN_POINT('',(2.600557971936,0.43538185681));+#6206 = CARTESIAN_POINT('',(2.598125015035,0.422682037722));+#6207 = CARTESIAN_POINT('',(2.591863308431,0.410767725325));+#6208 = CARTESIAN_POINT('',(2.581773589601,0.399643605901));+#6209 = CARTESIAN_POINT('',(2.567873266518,0.389310878728));+#6210 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6211 = PCURVE('',#6212,#6219);+#6212 = SURFACE_OF_LINEAR_EXTRUSION('',#6213,#6217);+#6213 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#6214,#6215,#6216),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6214 = CARTESIAN_POINT('',(-0.460598205835,-3.294591427213E-02,+ 1.8000001));+#6215 = CARTESIAN_POINT('',(-0.460598205835,-6.761074581063E-02,+ 1.8000001));+#6216 = CARTESIAN_POINT('',(-0.47807386471,-8.666207884626E-02,1.8000001+ ));+#6217 = VECTOR('',#6218,1.);+#6218 = DIRECTION('',(0.,0.,1.));+#6219 = DEFINITIONAL_REPRESENTATION('',(#6220),#6226);+#6220 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#6221,#6222,#6223,#6224,#6225),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6221 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#6222 = CARTESIAN_POINT('',(0.749912712244,-5.00001E-02));+#6223 = CARTESIAN_POINT('',(0.499822718919,-5.00001E-02));+#6224 = CARTESIAN_POINT('',(0.249821680025,-5.00001E-02));+#6225 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#6226 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6227 = ORIENTED_EDGE('',*,*,#6228,.T.);+#6228 = EDGE_CURVE('',#6193,#6229,#6231,.T.);+#6229 = VERTEX_POINT('',#6230);+#6230 = CARTESIAN_POINT('',(-0.47757251384,2.084187185476E-02,1.75));+#6231 = SURFACE_CURVE('',#6232,(#6238,#6247),.PCURVE_S1.);+#6232 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#6233,#6234,#6235,#6236,#6237),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6233 = CARTESIAN_POINT('',(-0.460598205835,-3.294591427213E-02,1.75));+#6234 = CARTESIAN_POINT('',(-0.460598205835,-1.555474877511E-02,1.75));+#6235 = CARTESIAN_POINT('',(-0.463423069724,-7.850300648449E-04,1.75));+#6236 = CARTESIAN_POINT('',(-0.469082113258,1.134838597103E-02,1.75));+#6237 = CARTESIAN_POINT('',(-0.47757251384,2.084187185476E-02,1.75));+#6238 = PCURVE('',#2438,#6239);+#6239 = DEFINITIONAL_REPRESENTATION('',(#6240),#6246);+#6240 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#6241,#6242,#6243,#6244,#6245),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6241 = CARTESIAN_POINT('',(2.567873266518,0.389310878728));+#6242 = CARTESIAN_POINT('',(2.553915871554,0.378935727493));+#6243 = CARTESIAN_POINT('',(2.540377090173,0.372391581597));+#6244 = CARTESIAN_POINT('',(2.527263287512,0.369694780128));+#6245 = CARTESIAN_POINT('',(2.514579058717,0.370845221859));+#6246 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6247 = PCURVE('',#6248,#6255);+#6248 = SURFACE_OF_LINEAR_EXTRUSION('',#6249,#6253);+#6249 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#6250,#6251,#6252),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6250 = CARTESIAN_POINT('',(-0.47757251384,2.084187185476E-02,1.8000001)+ );+#6251 = CARTESIAN_POINT('',(-0.460598205835,1.862160371903E-03,1.8000001+ ));+#6252 = CARTESIAN_POINT('',(-0.460598205835,-3.294591427213E-02,+ 1.8000001));+#6253 = VECTOR('',#6254,1.);+#6254 = DIRECTION('',(0.,0.,1.));+#6255 = DEFINITIONAL_REPRESENTATION('',(#6256),#6262);+#6256 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#6257,#6258,#6259,#6260,#6261),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6257 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#6258 = CARTESIAN_POINT('',(0.750184897113,-5.00001E-02));+#6259 = CARTESIAN_POINT('',(0.500187236135,-5.00001E-02));+#6260 = CARTESIAN_POINT('',(0.250095632178,-5.00001E-02));+#6261 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#6262 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6263 = ORIENTED_EDGE('',*,*,#6264,.T.);+#6264 = EDGE_CURVE('',#6229,#6265,#6267,.T.);+#6265 = VERTEX_POINT('',#6266);+#6266 = CARTESIAN_POINT('',(-0.52548733264,3.982158333762E-02,1.75));+#6267 = SURFACE_CURVE('',#6268,(#6277,#6289),.PCURVE_S1.);+#6268 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#6269,#6270,#6271,#6272,#6273,+ #6274,#6275,#6276),.UNSPECIFIED.,.F.,.F.,(5,3,5),(0.,0.223964161537,+ 1.),.UNSPECIFIED.);+#6269 = CARTESIAN_POINT('',(-0.47757251384,2.084187185476E-02,1.75));+#6270 = CARTESIAN_POINT('',(-0.47947356693,2.296752193361E-02,1.75));+#6271 = CARTESIAN_POINT('',(-0.481491475937,2.493454058922E-02,1.75));+#6272 = CARTESIAN_POINT('',(-0.483626224938,2.674286224785E-02,1.75));+#6273 = CARTESIAN_POINT('',(-0.493679382839,3.410830114912E-02,1.75));+#6274 = CARTESIAN_POINT('',(-0.502883299265,3.791842932797E-02,1.75));+#6275 = CARTESIAN_POINT('',(-0.513487770579,3.982158333762E-02,1.75));+#6276 = CARTESIAN_POINT('',(-0.52548733264,3.982158333762E-02,1.75));+#6277 = PCURVE('',#2438,#6278);+#6278 = DEFINITIONAL_REPRESENTATION('',(#6279),#6288);+#6279 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#6280,#6281,#6282,#6283,#6284,+ #6285,#6286,#6287),.UNSPECIFIED.,.F.,.F.,(5,3,5),(0.,0.223964161537,+ 1.),.UNSPECIFIED.);+#6280 = CARTESIAN_POINT('',(2.514579058717,0.370845221859));+#6281 = CARTESIAN_POINT('',(2.511738981609,0.371102812863));+#6282 = CARTESIAN_POINT('',(2.508956501768,0.37154882305));+#6283 = CARTESIAN_POINT('',(2.506231681321,0.372183278761));+#6284 = CARTESIAN_POINT('',(2.49432302727,0.375857463389));+#6285 = CARTESIAN_POINT('',(2.485774348415,0.380971096556));+#6286 = CARTESIAN_POINT('',(2.477920586925,0.388346409261));+#6287 = CARTESIAN_POINT('',(2.47076193668,0.397976737206));+#6288 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6289 = PCURVE('',#6290,#6297);+#6290 = SURFACE_OF_LINEAR_EXTRUSION('',#6291,#6295);+#6291 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#6292,#6293,#6294),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6292 = CARTESIAN_POINT('',(-0.52548733264,3.982158333762E-02,1.8000001)+ );+#6293 = CARTESIAN_POINT('',(-0.494546821846,3.982158333762E-02,1.8000001+ ));+#6294 = CARTESIAN_POINT('',(-0.47757251384,2.084187185476E-02,1.8000001)+ );+#6295 = VECTOR('',#6296,1.);+#6296 = DIRECTION('',(0.,0.,1.));+#6297 = DEFINITIONAL_REPRESENTATION('',(#6298),#6307);+#6298 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#6299,#6300,#6301,#6302,#6303,+ #6304,#6305,#6306),.UNSPECIFIED.,.F.,.F.,(5,3,5),(0.,0.223964161537,+ 1.),.UNSPECIFIED.);+#6299 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#6300 = CARTESIAN_POINT('',(0.944002044479,-5.00001E-02));+#6301 = CARTESIAN_POINT('',(0.888002034459,-5.00001E-02));+#6302 = CARTESIAN_POINT('',(0.832001007026,-5.00001E-02));+#6303 = CARTESIAN_POINT('',(0.581956505969,-5.00001E-02));+#6304 = CARTESIAN_POINT('',(0.387913238036,-5.00001E-02));+#6305 = CARTESIAN_POINT('',(0.193913444749,-5.00001E-02));+#6306 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#6307 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6308 = ORIENTED_EDGE('',*,*,#6309,.T.);+#6309 = EDGE_CURVE('',#6265,#6310,#6312,.T.);+#6310 = VERTEX_POINT('',#6311);+#6311 = CARTESIAN_POINT('',(-0.553419738219,3.215807719171E-02,1.75));+#6312 = SURFACE_CURVE('',#6313,(#6319,#6328),.PCURVE_S1.);+#6313 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#6314,#6315,#6316,#6317,#6318),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6314 = CARTESIAN_POINT('',(-0.52548733264,3.982158333762E-02,1.75));+#6315 = CARTESIAN_POINT('',(-0.533365190653,3.982158333762E-02,1.75));+#6316 = CARTESIAN_POINT('',(-0.540646872193,3.854449859612E-02,1.75));+#6317 = CARTESIAN_POINT('',(-0.547331800111,3.598989705959E-02,1.75));+#6318 = CARTESIAN_POINT('',(-0.553419738219,3.215807719171E-02,1.75));+#6319 = PCURVE('',#2438,#6320);+#6320 = DEFINITIONAL_REPRESENTATION('',(#6321),#6327);+#6321 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#6322,#6323,#6324,#6325,#6326),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6322 = CARTESIAN_POINT('',(2.47076193668,0.397976737206));+#6323 = CARTESIAN_POINT('',(2.466062195981,0.40429916429));+#6324 = CARTESIAN_POINT('',(2.462743052644,0.410905004054));+#6325 = CARTESIAN_POINT('',(2.460805197729,0.417794051057));+#6326 = CARTESIAN_POINT('',(2.460248532608,0.424965937688));+#6327 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6328 = PCURVE('',#6329,#6336);+#6329 = SURFACE_OF_LINEAR_EXTRUSION('',#6330,#6334);+#6330 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#6331,#6332,#6333),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6331 = CARTESIAN_POINT('',(-0.553419738219,3.215807719171E-02,1.8000001+ ));+#6332 = CARTESIAN_POINT('',(-0.541244074249,3.982158333762E-02,1.8000001+ ));+#6333 = CARTESIAN_POINT('',(-0.52548733264,3.982158333762E-02,1.8000001)+ );+#6334 = VECTOR('',#6335,1.);+#6335 = DIRECTION('',(0.,0.,1.));+#6336 = DEFINITIONAL_REPRESENTATION('',(#6337),#6343);+#6337 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#6338,#6339,#6340,#6341,#6342),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6338 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#6339 = CARTESIAN_POINT('',(0.750016272122,-5.00001E-02));+#6340 = CARTESIAN_POINT('',(0.500013755544,-5.00001E-02));+#6341 = CARTESIAN_POINT('',(0.250004357988,-5.00001E-02));+#6342 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#6343 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6344 = ORIENTED_EDGE('',*,*,#6345,.T.);+#6345 = EDGE_CURVE('',#6310,#6346,#6348,.T.);+#6346 = VERTEX_POINT('',#6347);+#6347 = CARTESIAN_POINT('',(-0.572471071255,1.01702604927E-02,1.75));+#6348 = SURFACE_CURVE('',#6349,(#6355,#6364),.PCURVE_S1.);+#6349 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#6350,#6351,#6352,#6353,#6354),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6350 = CARTESIAN_POINT('',(-0.553419738219,3.215807719171E-02,1.75));+#6351 = CARTESIAN_POINT('',(-0.559507699957,2.832624245081E-02,1.75));+#6352 = CARTESIAN_POINT('',(-0.56471240095,2.338415743989E-02,1.75));+#6353 = CARTESIAN_POINT('',(-0.569033475892,1.733191749795E-02,1.75));+#6354 = CARTESIAN_POINT('',(-0.572471071255,1.01702604927E-02,1.75));+#6355 = PCURVE('',#2438,#6356);+#6356 = DEFINITIONAL_REPRESENTATION('',(#6357),#6363);+#6357 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#6358,#6359,#6360,#6361,#6362),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6358 = CARTESIAN_POINT('',(2.460248532608,0.424965937688));+#6359 = CARTESIAN_POINT('',(2.459691865326,0.432137852156));+#6360 = CARTESIAN_POINT('',(2.460553168871,0.439263248488));+#6361 = CARTESIAN_POINT('',(2.462832584662,0.446341776628));+#6362 = CARTESIAN_POINT('',(2.466529433137,0.453373113932));+#6363 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6364 = PCURVE('',#6365,#6372);+#6365 = SURFACE_OF_LINEAR_EXTRUSION('',#6366,#6370);+#6366 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#6367,#6368,#6369),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6367 = CARTESIAN_POINT('',(-0.572471071255,1.01702604927E-02,1.8000001)+ );+#6368 = CARTESIAN_POINT('',(-0.565595402189,2.44945710458E-02,1.8000001)+ );+#6369 = CARTESIAN_POINT('',(-0.553419738219,3.215807719171E-02,1.8000001+ ));+#6370 = VECTOR('',#6371,1.);+#6371 = DIRECTION('',(0.,0.,1.));+#6372 = DEFINITIONAL_REPRESENTATION('',(#6373),#6379);+#6373 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#6374,#6375,#6376,#6377,#6378),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6374 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#6375 = CARTESIAN_POINT('',(0.749994671633,-5.00001E-02));+#6376 = CARTESIAN_POINT('',(0.499984850386,-5.00001E-02));+#6377 = CARTESIAN_POINT('',(0.249982607495,-5.00001E-02));+#6378 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#6379 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6380 = ORIENTED_EDGE('',*,*,#6381,.T.);+#6381 = EDGE_CURVE('',#6346,#6382,#6384,.T.);+#6382 = VERTEX_POINT('',#6383);+#6383 = CARTESIAN_POINT('',(-0.558290003807,7.112020189614E-02,1.75));+#6384 = SURFACE_CURVE('',#6385,(#6391,#6400),.PCURVE_S1.);+#6385 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#6386,#6387,#6388,#6389,#6390),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6386 = CARTESIAN_POINT('',(-0.572471071255,1.01702604927E-02,1.75));+#6387 = CARTESIAN_POINT('',(-0.572471071255,3.027220111282E-02,1.75));+#6388 = CARTESIAN_POINT('',(-0.570113133855,4.714398591859E-02,1.75));+#6389 = CARTESIAN_POINT('',(-0.565386164832,6.076267393499E-02,1.75));+#6390 = CARTESIAN_POINT('',(-0.558290003807,7.112020189614E-02,1.75));+#6391 = PCURVE('',#2438,#6392);+#6392 = DEFINITIONAL_REPRESENTATION('',(#6393),#6399);+#6393 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#6394,#6395,#6396,#6397,#6398),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6394 = CARTESIAN_POINT('',(2.466529433137,0.453373113932));+#6395 = CARTESIAN_POINT('',(2.450396487658,0.441380779428));+#6396 = CARTESIAN_POINT('',(2.438262613871,0.429423099961));+#6397 = CARTESIAN_POINT('',(2.430152841753,0.417504857824));+#6398 = CARTESIAN_POINT('',(2.426073738211,0.405630734654));+#6399 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6400 = PCURVE('',#6401,#6408);+#6401 = SURFACE_OF_LINEAR_EXTRUSION('',#6402,#6406);+#6402 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#6403,#6404,#6405),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6403 = CARTESIAN_POINT('',(-0.558290003807,7.112020189614E-02,1.8000001+ ));+#6404 = CARTESIAN_POINT('',(-0.572471071255,5.042157314691E-02,1.8000001+ ));+#6405 = CARTESIAN_POINT('',(-0.572471071255,1.01702604927E-02,1.8000001)+ );+#6406 = VECTOR('',#6407,1.);+#6407 = DIRECTION('',(0.,0.,1.));+#6408 = DEFINITIONAL_REPRESENTATION('',(#6409),#6415);+#6409 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#6410,#6411,#6412,#6413,#6414),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6410 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#6411 = CARTESIAN_POINT('',(0.750294595448,-5.00001E-02));+#6412 = CARTESIAN_POINT('',(0.500329078993,-5.00001E-02));+#6413 = CARTESIAN_POINT('',(0.250198408953,-5.00001E-02));+#6414 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#6415 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6416 = ORIENTED_EDGE('',*,*,#6417,.T.);+#6417 = EDGE_CURVE('',#6382,#6418,#6420,.T.);+#6418 = VERTEX_POINT('',#6419);+#6419 = CARTESIAN_POINT('',(-0.516606260098,9.181883064537E-02,1.75));+#6420 = SURFACE_CURVE('',#6421,(#6430,#6442),.PCURVE_S1.);+#6421 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#6422,#6423,#6424,#6425,#6426,+ #6427,#6428,#6429),.UNSPECIFIED.,.F.,.F.,(5,3,5),(0.,0.393979983601,+ 1.),.UNSPECIFIED.);+#6422 = CARTESIAN_POINT('',(-0.558290003807,7.112020189614E-02,1.75));+#6423 = CARTESIAN_POINT('',(-0.555496684766,7.519731908287E-02,1.75));+#6424 = CARTESIAN_POINT('',(-0.552358436288,7.873955391731E-02,1.75));+#6425 = CARTESIAN_POINT('',(-0.548875238186,8.174634917326E-02,1.75));+#6426 = CARTESIAN_POINT('',(-0.539159240031,8.801874865451E-02,1.75));+#6427 = CARTESIAN_POINT('',(-0.532455544292,9.055269773961E-02,1.75));+#6428 = CARTESIAN_POINT('',(-0.524937113665,9.181883064537E-02,1.75));+#6429 = CARTESIAN_POINT('',(-0.516606260098,9.181883064537E-02,1.75));+#6430 = PCURVE('',#2438,#6431);+#6431 = DEFINITIONAL_REPRESENTATION('',(#6432),#6441);+#6432 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#6433,#6434,#6435,#6436,#6437,+ #6438,#6439,#6440),.UNSPECIFIED.,.F.,.F.,(5,3,5),(0.,0.393979983601,+ 1.),.UNSPECIFIED.);+#6433 = CARTESIAN_POINT('',(2.426073738211,0.405630734654));+#6434 = CARTESIAN_POINT('',(2.424468047817,0.400956627876));+#6435 = CARTESIAN_POINT('',(2.423497407404,0.396324793647));+#6436 = CARTESIAN_POINT('',(2.42316227622,0.391735548196));+#6437 = CARTESIAN_POINT('',(2.423924651423,0.38019594684));+#6438 = CARTESIAN_POINT('',(2.42589027753,0.373304158354));+#6439 = CARTESIAN_POINT('',(2.42935944915,0.366514847645));+#6440 = CARTESIAN_POINT('',(2.434329436106,0.359828865981));+#6441 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6442 = PCURVE('',#6443,#6450);+#6443 = SURFACE_OF_LINEAR_EXTRUSION('',#6444,#6448);+#6444 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#6445,#6446,#6447),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6445 = CARTESIAN_POINT('',(-0.516606260098,9.181883064537E-02,1.8000001+ ));+#6446 = CARTESIAN_POINT('',(-0.54410893636,9.181883064537E-02,1.8000001)+ );+#6447 = CARTESIAN_POINT('',(-0.558290003807,7.112020189614E-02,1.8000001+ ));+#6448 = VECTOR('',#6449,1.);+#6449 = DIRECTION('',(0.,0.,1.));+#6450 = DEFINITIONAL_REPRESENTATION('',(#6451),#6460);+#6451 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#6452,#6453,#6454,#6455,#6456,+ #6457,#6458,#6459),.UNSPECIFIED.,.F.,.F.,(5,3,5),(0.,0.393979983601,+ 1.),.UNSPECIFIED.);+#6452 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#6453 = CARTESIAN_POINT('',(0.90151238432,-5.00001E-02));+#6454 = CARTESIAN_POINT('',(0.803012408113,-5.00001E-02));+#6455 = CARTESIAN_POINT('',(0.704506224301,-5.00001E-02));+#6456 = CARTESIAN_POINT('',(0.454477724373,-5.00001E-02));+#6457 = CARTESIAN_POINT('',(0.302955345538,-5.00001E-02));+#6458 = CARTESIAN_POINT('',(0.151455325437,-5.00001E-02));+#6459 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#6460 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6461 = ORIENTED_EDGE('',*,*,#6462,.T.);+#6462 = EDGE_CURVE('',#6418,#5858,#6463,.T.);+#6463 = SURFACE_CURVE('',#6464,(#6470,#6479),.PCURVE_S1.);+#6464 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#6465,#6466,#6467,#6468,#6469),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6465 = CARTESIAN_POINT('',(-0.516606260098,9.181883064537E-02,1.75));+#6466 = CARTESIAN_POINT('',(-0.511091473656,9.181883064537E-02,1.75));+#6467 = CARTESIAN_POINT('',(-0.505719856852,9.135330289767E-02,1.75));+#6468 = CARTESIAN_POINT('',(-0.500491449209,9.042222093595E-02,1.75));+#6469 = CARTESIAN_POINT('',(-0.495406280479,8.902559008752E-02,1.75));+#6470 = PCURVE('',#2438,#6471);+#6471 = DEFINITIONAL_REPRESENTATION('',(#6472),#6478);+#6472 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#6473,#6474,#6475,#6476,#6477),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6473 = CARTESIAN_POINT('',(2.434329436106,0.359828865981));+#6474 = CARTESIAN_POINT('',(2.437619425117,0.355402937625));+#6475 = CARTESIAN_POINT('',(2.441197614938,0.351369633672));+#6476 = CARTESIAN_POINT('',(2.445064003232,0.347729001631));+#6477 = CARTESIAN_POINT('',(2.449218567975,0.344481062201));+#6478 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6479 = PCURVE('',#6480,#6487);+#6480 = SURFACE_OF_LINEAR_EXTRUSION('',#6481,#6485);+#6481 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#6482,#6483,#6484),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6482 = CARTESIAN_POINT('',(-0.495406280479,8.902559008752E-02,1.8000001+ ));+#6483 = CARTESIAN_POINT('',(-0.505576540972,9.181883064537E-02,1.8000001+ ));+#6484 = CARTESIAN_POINT('',(-0.516606260098,9.181883064537E-02,1.8000001+ ));+#6485 = VECTOR('',#6486,1.);+#6486 = DIRECTION('',(0.,0.,1.));+#6487 = DEFINITIONAL_REPRESENTATION('',(#6488),#6494);+#6488 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#6489,#6490,#6491,#6492,#6493),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6489 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#6490 = CARTESIAN_POINT('',(0.750003314731,-5.00001E-02));+#6491 = CARTESIAN_POINT('',(0.50000347121,-5.00001E-02));+#6492 = CARTESIAN_POINT('',(0.250001891979,-5.00001E-02));+#6493 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#6494 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6495 = FACE_BOUND('',#6496,.F.);+#6496 = EDGE_LOOP('',(#6497,#6526,#6553,#6580,#6607,#6634,#6661,#6688,+ #6715,#6742));+#6497 = ORIENTED_EDGE('',*,*,#6498,.T.);+#6498 = EDGE_CURVE('',#6499,#6501,#6503,.T.);+#6499 = VERTEX_POINT('',#6500);+#6500 = CARTESIAN_POINT('',(-0.738203344354,0.112302594736,1.75));+#6501 = VERTEX_POINT('',#6502);+#6502 = CARTESIAN_POINT('',(-0.77487357937,0.112302594736,1.75));+#6503 = SURFACE_CURVE('',#6504,(#6508,#6515),.PCURVE_S1.);+#6504 = LINE('',#6505,#6506);+#6505 = CARTESIAN_POINT('',(-1.227479609876,0.112302594736,1.75));+#6506 = VECTOR('',#6507,1.);+#6507 = DIRECTION('',(-1.,-0.,-0.));+#6508 = PCURVE('',#2438,#6509);+#6509 = DEFINITIONAL_REPRESENTATION('',(#6510),#6514);+#6510 = LINE('',#6511,#6512);+#6511 = CARTESIAN_POINT('',(1.993800105258,0.918124856186));+#6512 = VECTOR('',#6513,1.);+#6513 = DIRECTION('',(-0.596575959062,0.802556617983));+#6514 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6515 = PCURVE('',#6516,#6521);+#6516 = PLANE('',#6517);+#6517 = AXIS2_PLACEMENT_3D('',#6518,#6519,#6520);+#6518 = CARTESIAN_POINT('',(-0.77487357937,0.112302594736,1.8000001));+#6519 = DIRECTION('',(0.,-1.,0.));+#6520 = DIRECTION('',(1.,0.,0.));+#6521 = DEFINITIONAL_REPRESENTATION('',(#6522),#6525);+#6522 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#6523,#6524),.UNSPECIFIED.,.F.,+ .F.,(2,2),(-0.489276265522,-0.452606030506),.PIECEWISE_BEZIER_KNOTS.);+#6523 = CARTESIAN_POINT('',(3.667023501594E-02,-5.00001E-02));+#6524 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#6525 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6526 = ORIENTED_EDGE('',*,*,#6527,.T.);+#6527 = EDGE_CURVE('',#6501,#6528,#6530,.T.);+#6528 = VERTEX_POINT('',#6529);+#6529 = CARTESIAN_POINT('',(-0.77487357937,-0.101559361821,1.75));+#6530 = SURFACE_CURVE('',#6531,(#6535,#6542),.PCURVE_S1.);+#6531 = LINE('',#6532,#6533);+#6532 = CARTESIAN_POINT('',(-0.77487357937,1.079305959472,1.75));+#6533 = VECTOR('',#6534,1.);+#6534 = DIRECTION('',(0.,-1.,0.));+#6535 = PCURVE('',#2438,#6536);+#6536 = DEFINITIONAL_REPRESENTATION('',(#6537),#6541);+#6537 = LINE('',#6538,#6539);+#6538 = CARTESIAN_POINT('',(1.487739032004,-2.200806866967E-02));+#6539 = VECTOR('',#6540,1.);+#6540 = DIRECTION('',(0.802556617983,0.596575959062));+#6541 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6542 = PCURVE('',#6543,#6548);+#6543 = PLANE('',#6544);+#6544 = AXIS2_PLACEMENT_3D('',#6545,#6546,#6547);+#6545 = CARTESIAN_POINT('',(-0.77487357937,-0.101559361821,1.8000001));+#6546 = DIRECTION('',(1.,0.,0.));+#6547 = DIRECTION('',(0.,1.,0.));+#6548 = DEFINITIONAL_REPRESENTATION('',(#6549),#6552);+#6549 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#6550,#6551),.UNSPECIFIED.,.F.,+ .F.,(2,2),(0.967003364735,1.180865321293),.PIECEWISE_BEZIER_KNOTS.);+#6550 = CARTESIAN_POINT('',(0.213861956558,-5.00001E-02));+#6551 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#6552 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6553 = ORIENTED_EDGE('',*,*,#6554,.T.);+#6554 = EDGE_CURVE('',#6528,#6555,#6557,.T.);+#6555 = VERTEX_POINT('',#6556);+#6556 = CARTESIAN_POINT('',(-0.746941173791,-0.101559361821,1.75));+#6557 = SURFACE_CURVE('',#6558,(#6562,#6569),.PCURVE_S1.);+#6558 = LINE('',#6559,#6560);+#6559 = CARTESIAN_POINT('',(-1.213513407087,-0.101559361821,1.75));+#6560 = VECTOR('',#6561,1.);+#6561 = DIRECTION('',(1.,-0.,0.));+#6562 = PCURVE('',#2438,#6563);+#6563 = DEFINITIONAL_REPRESENTATION('',(#6564),#6568);+#6564 = LINE('',#6565,#6566);+#6565 = CARTESIAN_POINT('',(2.173768334652,1.034501089549));+#6566 = VECTOR('',#6567,1.);+#6567 = DIRECTION('',(0.596575959062,-0.802556617983));+#6568 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6569 = PCURVE('',#6570,#6575);+#6570 = PLANE('',#6571);+#6571 = AXIS2_PLACEMENT_3D('',#6572,#6573,#6574);+#6572 = CARTESIAN_POINT('',(-0.746941173791,-0.101559361821,1.8000001));+#6573 = DIRECTION('',(0.,1.,0.));+#6574 = DIRECTION('',(-1.,0.,0.));+#6575 = DEFINITIONAL_REPRESENTATION('',(#6576),#6579);+#6576 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#6577,#6578),.UNSPECIFIED.,.F.,+ .F.,(2,2),(0.438639827717,0.466572233295),.PIECEWISE_BEZIER_KNOTS.);+#6577 = CARTESIAN_POINT('',(2.793240557855E-02,-5.00001E-02));+#6578 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#6579 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6580 = ORIENTED_EDGE('',*,*,#6581,.T.);+#6581 = EDGE_CURVE('',#6555,#6582,#6584,.T.);+#6582 = VERTEX_POINT('',#6583);+#6583 = CARTESIAN_POINT('',(-0.746941173791,7.448641487612E-02,1.75));+#6584 = SURFACE_CURVE('',#6585,(#6589,#6596),.PCURVE_S1.);+#6585 = LINE('',#6586,#6587);+#6586 = CARTESIAN_POINT('',(-0.746941173791,1.167328847821,1.75));+#6587 = VECTOR('',#6588,1.);+#6588 = DIRECTION('',(0.,1.,0.));+#6589 = PCURVE('',#2438,#6590);+#6590 = DEFINITIONAL_REPRESENTATION('',(#6591),#6595);+#6591 = LINE('',#6592,#6593);+#6592 = CARTESIAN_POINT('',(1.433759482073,-9.693774465905E-02));+#6593 = VECTOR('',#6594,1.);+#6594 = DIRECTION('',(-0.802556617983,-0.596575959062));+#6595 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6596 = PCURVE('',#6597,#6602);+#6597 = PLANE('',#6598);+#6598 = AXIS2_PLACEMENT_3D('',#6599,#6600,#6601);+#6599 = CARTESIAN_POINT('',(-0.746941173791,7.448641487612E-02,1.8000001+ ));+#6600 = DIRECTION('',(-1.,0.,0.));+#6601 = DIRECTION('',(0.,-1.,0.));+#6602 = DEFINITIONAL_REPRESENTATION('',(#6603),#6606);+#6603 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#6604,#6605),.UNSPECIFIED.,.F.,+ .F.,(2,2),(-1.268888209642,-1.092842432944),.PIECEWISE_BEZIER_KNOTS.);+#6604 = CARTESIAN_POINT('',(0.176045776698,-5.00001E-02));+#6605 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#6606 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6607 = ORIENTED_EDGE('',*,*,#6608,.T.);+#6608 = EDGE_CURVE('',#6582,#6609,#6611,.T.);+#6609 = VERTEX_POINT('',#6610);+#6610 = CARTESIAN_POINT('',(-0.674746648604,-0.101559361821,1.75));+#6611 = SURFACE_CURVE('',#6612,(#6616,#6623),.PCURVE_S1.);+#6612 = LINE('',#6613,#6614);+#6613 = CARTESIAN_POINT('',(-1.161657334737,1.085768481943,1.75));+#6614 = VECTOR('',#6615,1.);+#6615 = DIRECTION('',(0.379424173637,-0.92522283611,0.));+#6616 = PCURVE('',#2438,#6617);+#6617 = DEFINITIONAL_REPRESENTATION('',(#6618),#6622);+#6618 = LINE('',#6619,#6620);+#6619 = CARTESIAN_POINT('',(1.251806602018,0.284552408387));+#6620 = VECTOR('',#6621,1.);+#6621 = DIRECTION('',(0.968899050508,0.247456319224));+#6622 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6623 = PCURVE('',#6624,#6629);+#6624 = PLANE('',#6625);+#6625 = AXIS2_PLACEMENT_3D('',#6626,#6627,#6628);+#6626 = CARTESIAN_POINT('',(-0.674746648604,-0.101559361821,1.8000001));+#6627 = DIRECTION('',(0.92522283611,0.379424173637,0.));+#6628 = DIRECTION('',(-0.379424173637,0.92522283611,0.));+#6629 = DEFINITIONAL_REPRESENTATION('',(#6630),#6633);+#6630 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#6631,#6632),.UNSPECIFIED.,.F.,+ .F.,(2,2),(1.09301459886,1.283288519721),.PIECEWISE_BEZIER_KNOTS.);+#6631 = CARTESIAN_POINT('',(0.190273920862,-5.00001E-02));+#6632 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#6633 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6634 = ORIENTED_EDGE('',*,*,#6635,.T.);+#6635 = EDGE_CURVE('',#6609,#6636,#6638,.T.);+#6636 = VERTEX_POINT('',#6637);+#6637 = CARTESIAN_POINT('',(-0.638076413588,-0.101559361821,1.75));+#6638 = SURFACE_CURVE('',#6639,(#6643,#6650),.PCURVE_S1.);+#6639 = LINE('',#6640,#6641);+#6640 = CARTESIAN_POINT('',(-1.159081026985,-0.101559361821,1.75));+#6641 = VECTOR('',#6642,1.);+#6642 = DIRECTION('',(1.,-0.,0.));+#6643 = PCURVE('',#2438,#6644);+#6644 = DEFINITIONAL_REPRESENTATION('',(#6645),#6649);+#6645 = LINE('',#6646,#6647);+#6646 = CARTESIAN_POINT('',(2.206241384015,0.990816022666));+#6647 = VECTOR('',#6648,1.);+#6648 = DIRECTION('',(0.596575959062,-0.802556617983));+#6649 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6650 = PCURVE('',#6651,#6656);+#6651 = PLANE('',#6652);+#6652 = AXIS2_PLACEMENT_3D('',#6653,#6654,#6655);+#6653 = CARTESIAN_POINT('',(-0.638076413588,-0.101559361821,1.8000001));+#6654 = DIRECTION('',(0.,1.,0.));+#6655 = DIRECTION('',(-1.,0.,0.));+#6656 = DEFINITIONAL_REPRESENTATION('',(#6657),#6660);+#6657 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#6658,#6659),.UNSPECIFIED.,.F.,+ .F.,(2,2),(0.484334378381,0.521004613397),.PIECEWISE_BEZIER_KNOTS.);+#6658 = CARTESIAN_POINT('',(3.667023501594E-02,-5.00001E-02));+#6659 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#6660 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6661 = ORIENTED_EDGE('',*,*,#6662,.T.);+#6662 = EDGE_CURVE('',#6636,#6663,#6665,.T.);+#6663 = VERTEX_POINT('',#6664);+#6664 = CARTESIAN_POINT('',(-0.638076413588,0.112302594736,1.75));+#6665 = SURFACE_CURVE('',#6666,(#6670,#6677),.PCURVE_S1.);+#6666 = LINE('',#6667,#6668);+#6667 = CARTESIAN_POINT('',(-0.638076413588,1.186236937751,1.75));+#6668 = VECTOR('',#6669,1.);+#6669 = DIRECTION('',(0.,1.,0.));+#6670 = PCURVE('',#2438,#6671);+#6671 = DEFINITIONAL_REPRESENTATION('',(#6672),#6676);+#6672 = LINE('',#6673,#6674);+#6673 = CARTESIAN_POINT('',(1.483530768092,-0.19558799031));+#6674 = VECTOR('',#6675,1.);+#6675 = DIRECTION('',(-0.802556617983,-0.596575959062));+#6676 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6677 = PCURVE('',#6678,#6683);+#6678 = PLANE('',#6679);+#6679 = AXIS2_PLACEMENT_3D('',#6680,#6681,#6682);+#6680 = CARTESIAN_POINT('',(-0.638076413588,0.112302594736,1.8000001));+#6681 = DIRECTION('',(-1.,0.,0.));+#6682 = DIRECTION('',(0.,-1.,0.));+#6683 = DEFINITIONAL_REPRESENTATION('',(#6684),#6687);+#6684 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#6685,#6686),.UNSPECIFIED.,.F.,+ .F.,(2,2),(-1.287796299572,-1.073934343014),.PIECEWISE_BEZIER_KNOTS.);+#6685 = CARTESIAN_POINT('',(0.213861956558,-5.00001E-02));+#6686 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#6687 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6688 = ORIENTED_EDGE('',*,*,#6689,.T.);+#6689 = EDGE_CURVE('',#6663,#6690,#6692,.T.);+#6690 = VERTEX_POINT('',#6691);+#6691 = CARTESIAN_POINT('',(-0.666008819166,0.112302594736,1.75));+#6692 = SURFACE_CURVE('',#6693,(#6697,#6704),.PCURVE_S1.);+#6693 = LINE('',#6694,#6695);+#6694 = CARTESIAN_POINT('',(-1.173047229774,0.112302594736,1.75));+#6695 = VECTOR('',#6696,1.);+#6696 = DIRECTION('',(-1.,-0.,-0.));+#6697 = PCURVE('',#2438,#6698);+#6698 = DEFINITIONAL_REPRESENTATION('',(#6699),#6703);+#6699 = LINE('',#6700,#6701);+#6700 = CARTESIAN_POINT('',(2.026273154621,0.874439789302));+#6701 = VECTOR('',#6702,1.);+#6702 = DIRECTION('',(-0.596575959062,0.802556617983));+#6703 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6704 = PCURVE('',#6705,#6710);+#6705 = PLANE('',#6706);+#6706 = AXIS2_PLACEMENT_3D('',#6707,#6708,#6709);+#6707 = CARTESIAN_POINT('',(-0.666008819166,0.112302594736,1.8000001));+#6708 = DIRECTION('',(0.,-1.,0.));+#6709 = DIRECTION('',(1.,0.,0.));+#6710 = DEFINITIONAL_REPRESENTATION('',(#6711),#6714);+#6711 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#6712,#6713),.UNSPECIFIED.,.F.,+ .F.,(2,2),(-0.534970816186,-0.507038410608),.PIECEWISE_BEZIER_KNOTS.);+#6712 = CARTESIAN_POINT('',(2.793240557855E-02,-5.00001E-02));+#6713 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#6714 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6715 = ORIENTED_EDGE('',*,*,#6716,.T.);+#6716 = EDGE_CURVE('',#6690,#6717,#6719,.T.);+#6717 = VERTEX_POINT('',#6718);+#6718 = CARTESIAN_POINT('',(-0.666008819166,-6.37431819613E-02,1.75));+#6719 = SURFACE_CURVE('',#6720,(#6724,#6731),.PCURVE_S1.);+#6720 = LINE('',#6721,#6722);+#6721 = CARTESIAN_POINT('',(-0.666008819166,1.098214049402,1.75));+#6722 = VECTOR('',#6723,1.);+#6723 = DIRECTION('',(0.,-1.,0.));+#6724 = PCURVE('',#2438,#6725);+#6725 = DEFINITIONAL_REPRESENTATION('',(#6726),#6730);+#6726 = LINE('',#6727,#6728);+#6727 = CARTESIAN_POINT('',(1.537510318024,-0.12065831432));+#6728 = VECTOR('',#6729,1.);+#6729 = DIRECTION('',(0.802556617983,0.596575959062));+#6730 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6731 = PCURVE('',#6732,#6737);+#6732 = PLANE('',#6733);+#6733 = AXIS2_PLACEMENT_3D('',#6734,#6735,#6736);+#6734 = CARTESIAN_POINT('',(-0.666008819166,-6.37431819613E-02,1.8000001+ ));+#6735 = DIRECTION('',(1.,0.,0.));+#6736 = DIRECTION('',(0.,1.,0.));+#6737 = DEFINITIONAL_REPRESENTATION('',(#6738),#6741);+#6738 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#6739,#6740),.UNSPECIFIED.,.F.,+ .F.,(2,2),(0.985911454666,1.161957231363),.PIECEWISE_BEZIER_KNOTS.);+#6739 = CARTESIAN_POINT('',(0.176045776698,-5.00001E-02));+#6740 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#6741 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6742 = ORIENTED_EDGE('',*,*,#6743,.T.);+#6743 = EDGE_CURVE('',#6717,#6499,#6744,.T.);+#6744 = SURFACE_CURVE('',#6745,(#6749,#6756),.PCURVE_S1.);+#6745 = LINE('',#6746,#6747);+#6746 = CARTESIAN_POINT('',(-1.183008007583,1.196955235824,1.75));+#6747 = VECTOR('',#6748,1.);+#6748 = DIRECTION('',(-0.379424173637,0.92522283611,0.));+#6749 = PCURVE('',#2438,#6750);+#6750 = DEFINITIONAL_REPRESENTATION('',(#6751),#6755);+#6751 = LINE('',#6752,#6753);+#6752 = CARTESIAN_POINT('',(1.149835638729,0.235356187847));+#6753 = VECTOR('',#6754,1.);+#6754 = DIRECTION('',(-0.968899050508,-0.247456319224));+#6755 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6756 = PCURVE('',#6757,#6762);+#6757 = PLANE('',#6758);+#6758 = AXIS2_PLACEMENT_3D('',#6759,#6760,#6761);+#6759 = CARTESIAN_POINT('',(-0.738203344354,0.112302594736,1.8000001));+#6760 = DIRECTION('',(-0.92522283611,-0.379424173637,0.));+#6761 = DIRECTION('',(0.379424173637,-0.92522283611,0.));+#6762 = DEFINITIONAL_REPRESENTATION('',(#6763),#6766);+#6763 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#6764,#6765),.UNSPECIFIED.,.F.,+ .F.,(2,2),(-1.362588955419,-1.172315034557),.PIECEWISE_BEZIER_KNOTS.);+#6764 = CARTESIAN_POINT('',(0.190273920862,-5.00001E-02));+#6765 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#6766 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6767 = FACE_BOUND('',#6768,.F.);+#6768 = EDGE_LOOP('',(#6769,#6807,#6834,#6870,#6906,#6942,#6987,#7023,+ #7059,#7086,#7122,#7158,#7203,#7239,#7275,#7311,#7338,#7374,#7410,+ #7446,#7491,#7527,#7563,#7590,#7626,#7662,#7698,#7734));+#6769 = ORIENTED_EDGE('',*,*,#6770,.T.);+#6770 = EDGE_CURVE('',#6771,#6773,#6775,.T.);+#6771 = VERTEX_POINT('',#6772);+#6772 = CARTESIAN_POINT('',(-0.852869450332,8.838099611263E-02,1.75));+#6773 = VERTEX_POINT('',#6774);+#6774 = CARTESIAN_POINT('',(-0.826441097361,7.563235972037E-02,1.75));+#6775 = SURFACE_CURVE('',#6776,(#6782,#6791),.PCURVE_S1.);+#6776 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#6777,#6778,#6779,#6780,#6781),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6777 = CARTESIAN_POINT('',(-0.852869450332,8.838099611263E-02,1.75));+#6778 = CARTESIAN_POINT('',(-0.846244156753,8.623225224916E-02,1.75));+#6779 = CARTESIAN_POINT('',(-0.839630950379,8.339115240146E-02,1.75));+#6780 = CARTESIAN_POINT('',(-0.833029906175,7.985779145966E-02,1.75));+#6781 = CARTESIAN_POINT('',(-0.826441097361,7.563235972037E-02,1.75));+#6782 = PCURVE('',#2438,#6783);+#6783 = DEFINITIONAL_REPRESENTATION('',(#6784),#6790);+#6784 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#6785,#6786,#6787,#6788,#6789),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6785 = CARTESIAN_POINT('',(2.236481957751,0.631750044121));+#6786 = CARTESIAN_POINT('',(2.24215893723,0.627714759844));+#6787 = CARTESIAN_POINT('',(2.24838436065,0.624102219169));+#6788 = CARTESIAN_POINT('',(2.255158107134,0.62091242565));+#6789 = CARTESIAN_POINT('',(2.262479980278,0.618145324524));+#6790 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6791 = PCURVE('',#6792,#6799);+#6792 = SURFACE_OF_LINEAR_EXTRUSION('',#6793,#6797);+#6793 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#6794,#6795,#6796),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6794 = CARTESIAN_POINT('',(-0.826441097361,7.563235972037E-02,1.8000001+ ));+#6795 = CARTESIAN_POINT('',(-0.83961946307,8.40837029467E-02,1.8000001)+ );+#6796 = CARTESIAN_POINT('',(-0.852869450332,8.838099611263E-02,1.8000001+ ));+#6797 = VECTOR('',#6798,1.);+#6798 = DIRECTION('',(0.,0.,1.));+#6799 = DEFINITIONAL_REPRESENTATION('',(#6800),#6806);+#6800 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#6801,#6802,#6803,#6804,#6805),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6801 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#6802 = CARTESIAN_POINT('',(0.749988681189,-5.00001E-02));+#6803 = CARTESIAN_POINT('',(0.499982992524,-5.00001E-02));+#6804 = CARTESIAN_POINT('',(0.249985808535,-5.00001E-02));+#6805 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#6806 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6807 = ORIENTED_EDGE('',*,*,#6808,.T.);+#6808 = EDGE_CURVE('',#6773,#6809,#6811,.T.);+#6809 = VERTEX_POINT('',#6810);+#6810 = CARTESIAN_POINT('',(-0.826441097361,0.104997196354,1.75));+#6811 = SURFACE_CURVE('',#6812,(#6816,#6823),.PCURVE_S1.);+#6812 = LINE('',#6813,#6814);+#6813 = CARTESIAN_POINT('',(-0.826441097361,1.18258423856,1.75));+#6814 = VECTOR('',#6815,1.);+#6815 = DIRECTION('',(0.,1.,0.));+#6816 = PCURVE('',#2438,#6817);+#6817 = DEFINITIONAL_REPRESENTATION('',(#6818),#6822);+#6818 = LINE('',#6819,#6820);+#6819 = CARTESIAN_POINT('',(1.374088424126,-4.223555423002E-02));+#6820 = VECTOR('',#6821,1.);+#6821 = DIRECTION('',(-0.802556617983,-0.596575959062));+#6822 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6823 = PCURVE('',#6824,#6829);+#6824 = PLANE('',#6825);+#6825 = AXIS2_PLACEMENT_3D('',#6826,#6827,#6828);+#6826 = CARTESIAN_POINT('',(-0.826441097361,0.104997196354,1.8000001));+#6827 = DIRECTION('',(-1.,0.,0.));+#6828 = DIRECTION('',(0.,-1.,0.));+#6829 = DEFINITIONAL_REPRESENTATION('',(#6830),#6833);+#6830 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#6831,#6832),.UNSPECIFIED.,.F.,+ .F.,(2,2),(-1.106951878839,-1.077587042205),.PIECEWISE_BEZIER_KNOTS.);+#6831 = CARTESIAN_POINT('',(2.936483663386E-02,-5.00001E-02));+#6832 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#6833 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6834 = ORIENTED_EDGE('',*,*,#6835,.T.);+#6835 = EDGE_CURVE('',#6809,#6836,#6838,.T.);+#6836 = VERTEX_POINT('',#6837);+#6837 = CARTESIAN_POINT('',(-0.855089718467,0.113376918028,1.75));+#6838 = SURFACE_CURVE('',#6839,(#6845,#6854),.PCURVE_S1.);+#6839 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#6840,#6841,#6842,#6843,#6844),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6840 = CARTESIAN_POINT('',(-0.826441097361,0.104997196354,1.75));+#6841 = CARTESIAN_POINT('',(-0.833960851567,0.107790247917,1.75));+#6842 = CARTESIAN_POINT('',(-0.84124227163,0.110117960577,1.75));+#6843 = CARTESIAN_POINT('',(-0.848285255164,0.111980212402,1.75));+#6844 = CARTESIAN_POINT('',(-0.855089718467,0.113376918028,1.75));+#6845 = PCURVE('',#2438,#6846);+#6846 = DEFINITIONAL_REPRESENTATION('',(#6847),#6853);+#6847 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#6848,#6849,#6850,#6851,#6852),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6848 = CARTESIAN_POINT('',(2.238913036301,0.600626968947));+#6849 = CARTESIAN_POINT('',(2.232185349708,0.604995730036));+#6850 = CARTESIAN_POINT('',(2.22597330835,0.609450824483));+#6851 = CARTESIAN_POINT('',(2.220277071167,0.61399224286));+#6852 = CARTESIAN_POINT('',(2.215096756603,0.618619968918));+#6853 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6854 = PCURVE('',#6855,#6862);+#6855 = SURFACE_OF_LINEAR_EXTRUSION('',#6856,#6860);+#6856 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#6857,#6858,#6859),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6857 = CARTESIAN_POINT('',(-0.855089718467,0.113376918028,1.8000001));+#6858 = CARTESIAN_POINT('',(-0.841481623442,0.11058367747,1.8000001));+#6859 = CARTESIAN_POINT('',(-0.826441097361,0.104997196354,1.8000001));+#6860 = VECTOR('',#6861,1.);+#6861 = DIRECTION('',(0.,0.,1.));+#6862 = DEFINITIONAL_REPRESENTATION('',(#6863),#6869);+#6863 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#6864,#6865,#6866,#6867,#6868),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6864 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#6865 = CARTESIAN_POINT('',(0.750016915439,-5.00001E-02));+#6866 = CARTESIAN_POINT('',(0.500021462307,-5.00001E-02));+#6867 = CARTESIAN_POINT('',(0.250015277325,-5.00001E-02));+#6868 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#6869 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6870 = ORIENTED_EDGE('',*,*,#6871,.T.);+#6871 = EDGE_CURVE('',#6836,#6872,#6874,.T.);+#6872 = VERTEX_POINT('',#6873);+#6873 = CARTESIAN_POINT('',(-0.881016720568,0.116170158586,1.75));+#6874 = SURFACE_CURVE('',#6875,(#6881,#6890),.PCURVE_S1.);+#6875 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#6876,#6877,#6878,#6879,#6880),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6876 = CARTESIAN_POINT('',(-0.855089718467,0.113376918028,1.75));+#6877 = CARTESIAN_POINT('',(-0.861893464229,0.114773476368,1.75));+#6878 = CARTESIAN_POINT('',(-0.86848259413,0.115704583065,1.75));+#6879 = CARTESIAN_POINT('',(-0.874857032675,0.116170158586,1.75));+#6880 = CARTESIAN_POINT('',(-0.881016720568,0.116170158586,1.75));+#6881 = PCURVE('',#2438,#6882);+#6882 = DEFINITIONAL_REPRESENTATION('',(#6883),#6889);+#6883 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#6884,#6885,#6886,#6887,#6888),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6884 = CARTESIAN_POINT('',(2.215096756603,0.618619968918));+#6885 = CARTESIAN_POINT('',(2.209916988311,0.623247206974));+#6886 = CARTESIAN_POINT('',(2.20523880598,0.627979880912));+#6887 = CARTESIAN_POINT('',(2.201062318476,0.63281797759));+#6888 = CARTESIAN_POINT('',(2.197387596763,0.637761475874));+#6889 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6890 = PCURVE('',#6891,#6898);+#6891 = SURFACE_OF_LINEAR_EXTRUSION('',#6892,#6896);+#6892 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#6893,#6894,#6895),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6893 = CARTESIAN_POINT('',(-0.881016720568,0.116170158586,1.8000001));+#6894 = CARTESIAN_POINT('',(-0.868697813493,0.116170158586,1.8000001));+#6895 = CARTESIAN_POINT('',(-0.855089718467,0.113376918028,1.8000001));+#6896 = VECTOR('',#6897,1.);+#6897 = DIRECTION('',(0.,0.,1.));+#6898 = DEFINITIONAL_REPRESENTATION('',(#6899),#6905);+#6899 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#6900,#6901,#6902,#6903,#6904),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6900 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#6901 = CARTESIAN_POINT('',(0.750011087186,-5.00001E-02));+#6902 = CARTESIAN_POINT('',(0.500013733096,-5.00001E-02));+#6903 = CARTESIAN_POINT('',(0.250009512025,-5.00001E-02));+#6904 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#6905 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6906 = ORIENTED_EDGE('',*,*,#6907,.T.);+#6907 = EDGE_CURVE('',#6872,#6908,#6910,.T.);+#6908 = VERTEX_POINT('',#6909);+#6909 = CARTESIAN_POINT('',(-0.932226130796,9.890936436916E-02,1.75));+#6910 = SURFACE_CURVE('',#6911,(#6917,#6926),.PCURVE_S1.);+#6911 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#6912,#6913,#6914,#6915,#6916),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6912 = CARTESIAN_POINT('',(-0.881016720568,0.116170158586,1.75));+#6913 = CARTESIAN_POINT('',(-0.896980304975,0.116170158586,1.75));+#6914 = CARTESIAN_POINT('',(-0.910841759843,0.11329625097,1.75));+#6915 = CARTESIAN_POINT('',(-0.922591126858,0.107541468269,1.75));+#6916 = CARTESIAN_POINT('',(-0.932226130796,9.890936436916E-02,1.75));+#6917 = PCURVE('',#2438,#6918);+#6918 = DEFINITIONAL_REPRESENTATION('',(#6919),#6925);+#6919 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#6920,#6921,#6922,#6923,#6924),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6920 = CARTESIAN_POINT('',(2.197387596763,0.637761475874));+#6921 = CARTESIAN_POINT('',(2.187864106086,0.650573156186));+#6922 = CARTESIAN_POINT('',(2.18190116893,0.663412262717));+#6923 = CARTESIAN_POINT('',(2.179510317977,0.676274959981));+#6924 = CARTESIAN_POINT('',(2.180690058374,0.689157301818));+#6925 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6926 = PCURVE('',#6927,#6934);+#6927 = SURFACE_OF_LINEAR_EXTRUSION('',#6928,#6932);+#6928 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#6929,#6930,#6931),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6929 = CARTESIAN_POINT('',(-0.932226130796,9.890936436916E-02,1.8000001+ ));+#6930 = CARTESIAN_POINT('',(-0.912959933102,0.116170158586,1.8000001));+#6931 = CARTESIAN_POINT('',(-0.881016720568,0.116170158586,1.8000001));+#6932 = VECTOR('',#6933,1.);+#6933 = DIRECTION('',(0.,0.,1.));+#6934 = DEFINITIONAL_REPRESENTATION('',(#6935),#6941);+#6935 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#6936,#6937,#6938,#6939,#6940),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6936 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#6937 = CARTESIAN_POINT('',(0.750125564385,-5.00001E-02));+#6938 = CARTESIAN_POINT('',(0.500116785782,-5.00001E-02));+#6939 = CARTESIAN_POINT('',(0.250049441283,-5.00001E-02));+#6940 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#6941 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6942 = ORIENTED_EDGE('',*,*,#6943,.T.);+#6943 = EDGE_CURVE('',#6908,#6944,#6946,.T.);+#6944 = VERTEX_POINT('',#6945);+#6945 = CARTESIAN_POINT('',(-0.95149232849,5.299994904647E-02,1.75));+#6946 = SURFACE_CURVE('',#6947,(#6956,#6968),.PCURVE_S1.);+#6947 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#6948,#6949,#6950,#6951,#6952,+ #6953,#6954,#6955),.UNSPECIFIED.,.F.,.F.,(5,3,5),(0.,0.34997696433,+ 1.),.UNSPECIFIED.);+#6948 = CARTESIAN_POINT('',(-0.932226130796,9.890936436916E-02,1.75));+#6949 = CARTESIAN_POINT('',(-0.935597441891,9.588897041398E-02,1.75));+#6950 = CARTESIAN_POINT('',(-0.938575739258,9.263586724919E-02,1.75));+#6951 = CARTESIAN_POINT('',(-0.941160741597,8.91500929526E-02,1.75));+#6952 = CARTESIAN_POINT('',(-0.947422920513,7.852569846971E-02,1.75));+#6953 = CARTESIAN_POINT('',(-0.950136432886,7.081748102872E-02,1.75));+#6954 = CARTESIAN_POINT('',(-0.95149232849,6.230812368361E-02,1.75));+#6955 = CARTESIAN_POINT('',(-0.95149232849,5.299994904647E-02,1.75));+#6956 = PCURVE('',#2438,#6957);+#6957 = DEFINITIONAL_REPRESENTATION('',(#6958),#6967);+#6958 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#6959,#6960,#6961,#6962,#6963,+ #6964,#6965,#6966),.UNSPECIFIED.,.F.,.F.,(5,3,5),(0.,0.34997696433,+ 1.),.UNSPECIFIED.);+#6959 = CARTESIAN_POINT('',(2.180690058374,0.689157301818));+#6960 = CARTESIAN_POINT('',(2.181102852382,0.69366486427));+#6961 = CARTESIAN_POINT('',(2.181936871247,0.697995839673));+#6962 = CARTESIAN_POINT('',(2.183192252229,0.702149979551));+#6963 = CARTESIAN_POINT('',(2.18798306494,0.713513991011));+#6964 = CARTESIAN_POINT('',(2.192550529614,0.720290275537));+#6965 = CARTESIAN_POINT('',(2.198570875946,0.726454936546));+#6966 = CARTESIAN_POINT('',(2.206041213102,0.732007969757));+#6967 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6968 = PCURVE('',#6969,#6976);+#6969 = SURFACE_OF_LINEAR_EXTRUSION('',#6970,#6974);+#6970 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#6971,#6972,#6973),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6971 = CARTESIAN_POINT('',(-0.95149232849,5.299994904647E-02,1.8000001)+ );+#6972 = CARTESIAN_POINT('',(-0.95149232849,8.164857015267E-02,1.8000001)+ );+#6973 = CARTESIAN_POINT('',(-0.932226130796,9.890936436916E-02,1.8000001+ ));+#6974 = VECTOR('',#6975,1.);+#6975 = DIRECTION('',(0.,0.,1.));+#6976 = DEFINITIONAL_REPRESENTATION('',(#6977),#6986);+#6977 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#6978,#6979,#6980,#6981,#6982,+ #6983,#6984,#6985),.UNSPECIFIED.,.F.,.F.,(5,3,5),(0.,0.34997696433,+ 1.),.UNSPECIFIED.);+#6978 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#6979 = CARTESIAN_POINT('',(0.912507097956,-5.00001E-02));+#6980 = CARTESIAN_POINT('',(0.825007085357,-5.00001E-02));+#6981 = CARTESIAN_POINT('',(0.737503528672,-5.00001E-02));+#6982 = CARTESIAN_POINT('',(0.487476990956,-5.00001E-02));+#6983 = CARTESIAN_POINT('',(0.324954071362,-5.00001E-02));+#6984 = CARTESIAN_POINT('',(0.16245414749,-5.00001E-02));+#6985 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#6986 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6987 = ORIENTED_EDGE('',*,*,#6988,.T.);+#6988 = EDGE_CURVE('',#6944,#6989,#6991,.T.);+#6989 = VERTEX_POINT('',#6990);+#6990 = CARTESIAN_POINT('',(-0.93802747657,1.647295713607E-02,1.75));+#6991 = SURFACE_CURVE('',#6992,(#6998,#7007),.PCURVE_S1.);+#6992 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#6993,#6994,#6995,#6996,#6997),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6993 = CARTESIAN_POINT('',(-0.95149232849,5.299994904647E-02,1.75));+#6994 = CARTESIAN_POINT('',(-0.95149232849,4.154333853321E-02,1.75));+#6995 = CARTESIAN_POINT('',(-0.949249298381,3.163450673373E-02,1.75));+#6996 = CARTESIAN_POINT('',(-0.944760369375,2.327747646008E-02,1.75));+#6997 = CARTESIAN_POINT('',(-0.93802747657,1.647295713607E-02,1.75));+#6998 = PCURVE('',#2438,#6999);+#6999 = DEFINITIONAL_REPRESENTATION('',(#7000),#7006);+#7000 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#7001,#7002,#7003,#7004,#7005),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#7001 = CARTESIAN_POINT('',(2.206041213102,0.732007969757));+#7002 = CARTESIAN_POINT('',(2.215235791689,0.738842708162));+#7003 = CARTESIAN_POINT('',(2.224526328065,0.742953920338));+#7004 = CARTESIAN_POINT('',(2.233911305145,0.744336904006));+#7005 = CARTESIAN_POINT('',(2.243388999143,0.742992788969));+#7006 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7007 = PCURVE('',#7008,#7015);+#7008 = SURFACE_OF_LINEAR_EXTRUSION('',#7009,#7013);+#7009 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#7010,#7011,#7012),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#7010 = CARTESIAN_POINT('',(-0.93802747657,1.647295713607E-02,1.8000001)+ );+#7011 = CARTESIAN_POINT('',(-0.95149232849,3.008105216151E-02,1.8000001)+ );+#7012 = CARTESIAN_POINT('',(-0.95149232849,5.299994904647E-02,1.8000001)+ );+#7013 = VECTOR('',#7014,1.);+#7014 = DIRECTION('',(0.,0.,1.));+#7015 = DEFINITIONAL_REPRESENTATION('',(#7016),#7022);+#7016 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#7017,#7018,#7019,#7020,#7021),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#7017 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#7018 = CARTESIAN_POINT('',(0.75006191243,-5.00001E-02));+#7019 = CARTESIAN_POINT('',(0.500052862799,-5.00001E-02));+#7020 = CARTESIAN_POINT('',(0.250017335685,-5.00001E-02));+#7021 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#7022 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7023 = ORIENTED_EDGE('',*,*,#7024,.T.);+#7024 = EDGE_CURVE('',#6989,#7025,#7027,.T.);+#7025 = VERTEX_POINT('',#7026);+#7026 = CARTESIAN_POINT('',(-0.894768058699,-3.867563849337E-03,1.75));+#7027 = SURFACE_CURVE('',#7028,(#7034,#7043),.PCURVE_S1.);+#7028 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#7029,#7030,#7031,#7032,#7033),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#7029 = CARTESIAN_POINT('',(-0.93802747657,1.647295713607E-02,1.75));+#7030 = CARTESIAN_POINT('',(-0.931291946534,9.665772525652E-03,1.75));+#7031 = CARTESIAN_POINT('',(-0.921833417588,4.006735430766E-03,1.75));+#7032 = CARTESIAN_POINT('',(-0.90965537539,-5.03602866349E-04,1.75));+#7033 = CARTESIAN_POINT('',(-0.894768058699,-3.867563849338E-03,1.75));+#7034 = PCURVE('',#2438,#7035);+#7035 = DEFINITIONAL_REPRESENTATION('',(#7036),#7042);+#7036 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#7037,#7038,#7039,#7040,#7041),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#7037 = CARTESIAN_POINT('',(2.243388999143,0.742992788969));+#7038 = CARTESIAN_POINT('',(2.252870405493,0.741648147451));+#7039 = CARTESIAN_POINT('',(2.263054834142,0.737433187931));+#7040 = CARTESIAN_POINT('',(2.273939763195,0.730350378966));+#7041 = CARTESIAN_POINT('',(2.285520947577,0.720409322682));+#7042 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7043 = PCURVE('',#7044,#7051);+#7044 = SURFACE_OF_LINEAR_EXTRUSION('',#7045,#7049);+#7045 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#7046,#7047,#7048),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#7046 = CARTESIAN_POINT('',(-0.894768058699,-3.867563849337E-03,+ 1.8000001));+#7047 = CARTESIAN_POINT('',(-0.92456262465,2.86486211062E-03,1.8000001)+ );+#7048 = CARTESIAN_POINT('',(-0.93802747657,1.647295713607E-02,1.8000001)+ );+#7049 = VECTOR('',#7050,1.);+#7050 = DIRECTION('',(0.,0.,1.));+#7051 = DEFINITIONAL_REPRESENTATION('',(#7052),#7058);+#7052 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#7053,#7054,#7055,#7056,#7057),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#7053 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#7054 = CARTESIAN_POINT('',(0.749884734135,-5.00001E-02));+#7055 = CARTESIAN_POINT('',(0.499811529163,-5.00001E-02));+#7056 = CARTESIAN_POINT('',(0.249832749962,-5.00001E-02));+#7057 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#7058 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7059 = ORIENTED_EDGE('',*,*,#7060,.T.);+#7060 = EDGE_CURVE('',#7025,#7061,#7063,.T.);+#7061 = VERTEX_POINT('',#7062);+#7062 = CARTESIAN_POINT('',(-0.879297803302,-7.448641487612E-03,1.75));+#7063 = SURFACE_CURVE('',#7064,(#7068,#7075),.PCURVE_S1.);+#7064 = LINE('',#7065,#7066);+#7065 = CARTESIAN_POINT('',(-1.50843618404,0.138185242943,1.75));+#7066 = VECTOR('',#7067,1.);+#7067 = DIRECTION('',(0.97423893818,-0.225518272727,0.));+#7068 = PCURVE('',#2438,#7069);+#7069 = DEFINITIONAL_REPRESENTATION('',(#7070),#7074);+#7070 = LINE('',#7071,#7072);+#7071 = CARTESIAN_POINT('',(1.805415876962,1.12816744847));+#7072 = VECTOR('',#7073,1.);+#7073 = DIRECTION('',(0.762198711154,-0.647343127495));+#7074 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7075 = PCURVE('',#7076,#7081);+#7076 = PLANE('',#7077);+#7077 = AXIS2_PLACEMENT_3D('',#7078,#7079,#7080);+#7078 = CARTESIAN_POINT('',(-0.879297803302,-7.448641487612E-03,+ 1.8000001));+#7079 = DIRECTION('',(0.225518272727,0.97423893818,0.));+#7080 = DIRECTION('',(-0.97423893818,0.225518272727,0.));+#7081 = DEFINITIONAL_REPRESENTATION('',(#7082),#7085);+#7082 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#7083,#7084),.UNSPECIFIED.,.F.,+ .F.,(2,2),(0.629894886451,0.645774210086),.PIECEWISE_BEZIER_KNOTS.);+#7083 = CARTESIAN_POINT('',(1.587932363517E-02,-5.00001E-02));+#7084 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#7085 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7086 = ORIENTED_EDGE('',*,*,#7087,.T.);+#7087 = EDGE_CURVE('',#7061,#7088,#7090,.T.);+#7088 = VERTEX_POINT('',#7089);+#7089 = CARTESIAN_POINT('',(-0.850147831327,-2.048376409093E-02,1.75));+#7090 = SURFACE_CURVE('',#7091,(#7097,#7106),.PCURVE_S1.);+#7091 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#7092,#7093,#7094,#7095,#7096),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#7092 = CARTESIAN_POINT('',(-0.879297803302,-7.448641487612E-03,1.75));+#7093 = CARTESIAN_POINT('',(-0.868916482789,-9.739691531882E-03,1.75));+#7094 = CARTESIAN_POINT('',(-0.860595427096,-1.267559362774E-02,1.75));+#7095 = CARTESIAN_POINT('',(-0.854338758109,-1.625701742166E-02,1.75));+#7096 = CARTESIAN_POINT('',(-0.850147831327,-2.048376409093E-02,1.75));+#7097 = PCURVE('',#2438,#7098);+#7098 = DEFINITIONAL_REPRESENTATION('',(#7099),#7105);+#7099 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#7100,#7101,#7102,#7103,#7104),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#7100 = CARTESIAN_POINT('',(2.297624147586,0.710129951658));+#7101 = CARTESIAN_POINT('',(2.305656091203,0.703165139554));+#7102 = CARTESIAN_POINT('',(2.31297646064,0.698238509847));+#7103 = CARTESIAN_POINT('',(2.319583334309,0.69535377008));+#7104 = CARTESIAN_POINT('',(2.325475743986,0.694511889503));+#7105 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7106 = PCURVE('',#7107,#7114);+#7107 = SURFACE_OF_LINEAR_EXTRUSION('',#7108,#7112);+#7108 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#7109,#7110,#7111),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#7109 = CARTESIAN_POINT('',(-0.850147831327,-2.048376409093E-02,+ 1.8000001));+#7110 = CARTESIAN_POINT('',(-0.858527553,-1.20324208646E-02,1.8000001));+#7111 = CARTESIAN_POINT('',(-0.879297803302,-7.448641487612E-03,+ 1.8000001));+#7112 = VECTOR('',#7113,1.);+#7113 = DIRECTION('',(0.,0.,1.));+#7114 = DEFINITIONAL_REPRESENTATION('',(#7115),#7121);+#7115 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#7116,#7117,#7118,#7119,#7120),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#7116 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#7117 = CARTESIAN_POINT('',(0.750091588639,-5.00001E-02));+#7118 = CARTESIAN_POINT('',(0.500103498324,-5.00001E-02));+#7119 = CARTESIAN_POINT('',(0.250063602677,-5.00001E-02));+#7120 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#7121 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7122 = ORIENTED_EDGE('',*,*,#7123,.T.);+#7123 = EDGE_CURVE('',#7088,#7124,#7126,.T.);+#7124 = VERTEX_POINT('',#7125);+#7125 = CARTESIAN_POINT('',(-0.841768109653,-4.497833513674E-02,1.75));+#7126 = SURFACE_CURVE('',#7127,(#7133,#7142),.PCURVE_S1.);+#7127 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#7128,#7129,#7130,#7131,#7132),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#7128 = CARTESIAN_POINT('',(-0.850147831327,-2.048376409093E-02,1.75));+#7129 = CARTESIAN_POINT('',(-0.845957664328,-2.470974448256E-02,1.75));+#7130 = CARTESIAN_POINT('',(-0.843164287933,-3.020125817092E-02,1.75));+#7131 = CARTESIAN_POINT('',(-0.841768109653,-3.695799035044E-02,1.75));+#7132 = CARTESIAN_POINT('',(-0.841768109653,-4.497833513674E-02,1.75));+#7133 = PCURVE('',#2438,#7134);+#7134 = DEFINITIONAL_REPRESENTATION('',(#7135),#7141);+#7135 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#7136,#7137,#7138,#7139,#7140),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#7136 = CARTESIAN_POINT('',(2.325475743986,0.694511889503));+#7137 = CARTESIAN_POINT('',(2.331367085412,0.693670161553));+#7138 = CARTESIAN_POINT('',(2.337440797267,0.694704423886));+#7139 = CARTESIAN_POINT('',(2.34369638379,0.697614815748));+#7140 = CARTESIAN_POINT('',(2.350133164577,0.702399560631));+#7141 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7142 = PCURVE('',#7143,#7150);+#7143 = SURFACE_OF_LINEAR_EXTRUSION('',#7144,#7148);+#7144 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#7145,#7146,#7147),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#7145 = CARTESIAN_POINT('',(-0.841768109653,-4.497833513674E-02,+ 1.8000001));+#7146 = CARTESIAN_POINT('',(-0.841768109653,-2.893510731726E-02,+ 1.8000001));+#7147 = CARTESIAN_POINT('',(-0.850147831327,-2.048376409093E-02,+ 1.8000001));+#7148 = VECTOR('',#7149,1.);+#7149 = DIRECTION('',(0.,0.,1.));+#7150 = DEFINITIONAL_REPRESENTATION('',(#7151),#7157);+#7151 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#7152,#7153,#7154,#7155,#7156),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#7152 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#7153 = CARTESIAN_POINT('',(0.749981731989,-5.00001E-02));+#7154 = CARTESIAN_POINT('',(0.499961441739,-5.00001E-02));+#7155 = CARTESIAN_POINT('',(0.249960446755,-5.00001E-02));+#7156 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#7157 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7158 = ORIENTED_EDGE('',*,*,#7159,.T.);+#7159 = EDGE_CURVE('',#7124,#7160,#7162,.T.);+#7160 = VERTEX_POINT('',#7161);+#7161 = CARTESIAN_POINT('',(-0.853943773623,-7.240938984592E-02,1.75));+#7162 = SURFACE_CURVE('',#7163,(#7172,#7184),.PCURVE_S1.);+#7163 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#7164,#7165,#7166,#7167,#7168,+ #7169,#7170,#7171),.UNSPECIFIED.,.F.,.F.,(5,3,5),(0.,0.656009951683,+ 1.),.UNSPECIFIED.);+#7164 = CARTESIAN_POINT('',(-0.841768109653,-4.497833513674E-02,1.75));+#7165 = CARTESIAN_POINT('',(-0.841768109653,-5.075663973794E-02,1.75));+#7166 = CARTESIAN_POINT('',(-0.842641170599,-5.597585247626E-02,1.75));+#7167 = CARTESIAN_POINT('',(-0.844387764753,-6.063532458122E-02,1.75));+#7168 = CARTESIAN_POINT('',(-0.848381563053,-6.688444427416E-02,1.75));+#7169 = CARTESIAN_POINT('',(-0.849995534501,-6.88801046482E-02,1.75));+#7170 = CARTESIAN_POINT('',(-0.851849628021,-7.072175486082E-02,1.75));+#7171 = CARTESIAN_POINT('',(-0.853943773623,-7.240938984592E-02,1.75));+#7172 = PCURVE('',#2438,#7173);+#7173 = DEFINITIONAL_REPRESENTATION('',(#7174),#7183);+#7174 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#7175,#7176,#7177,#7178,#7179,+ #7180,#7181,#7182),.UNSPECIFIED.,.F.,.F.,(5,3,5),(0.,0.656009951683,+ 1.),.UNSPECIFIED.);+#7175 = CARTESIAN_POINT('',(2.350133164577,0.702399560631));+#7176 = CARTESIAN_POINT('',(2.354770581176,0.70584675824));+#7177 = CARTESIAN_POINT('',(2.358438447728,0.709661095925));+#7178 = CARTESIAN_POINT('',(2.36113596182,0.713842565662));+#7179 = CARTESIAN_POINT('',(2.363768630135,0.720775889493));+#7180 = CARTESIAN_POINT('',(2.364407404011,0.723261755961));+#7181 = CARTESIAN_POINT('',(2.364779324957,0.725848455228));+#7182 = CARTESIAN_POINT('',(2.364884430662,0.728535928099));+#7183 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7184 = PCURVE('',#7185,#7192);+#7185 = SURFACE_OF_LINEAR_EXTRUSION('',#7186,#7190);+#7186 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#7187,#7188,#7189),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#7187 = CARTESIAN_POINT('',(-0.853943773623,-7.240938984592E-02,+ 1.8000001));+#7188 = CARTESIAN_POINT('',(-0.841768109653,-6.259723711705E-02,+ 1.8000001));+#7189 = CARTESIAN_POINT('',(-0.841768109653,-4.497833513674E-02,+ 1.8000001));+#7190 = VECTOR('',#7191,1.);+#7191 = DIRECTION('',(0.,0.,1.));+#7192 = DEFINITIONAL_REPRESENTATION('',(#7193),#7202);+#7193 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#7194,#7195,#7196,#7197,#7198,+ #7199,#7200,#7201),.UNSPECIFIED.,.F.,.F.,(5,3,5),(0.,0.656009951683,+ 1.),.UNSPECIFIED.);+#7194 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#7195 = CARTESIAN_POINT('',(0.836019730184,-5.00001E-02));+#7196 = CARTESIAN_POINT('',(0.672019757855,-5.00001E-02));+#7197 = CARTESIAN_POINT('',(0.508009901091,-5.00001E-02));+#7198 = CARTESIAN_POINT('',(0.257998600698,-5.00001E-02));+#7199 = CARTESIAN_POINT('',(0.171997188865,-5.00001E-02));+#7200 = CARTESIAN_POINT('',(8.599718286766E-02,-5.00001E-02));+#7201 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#7202 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7203 = ORIENTED_EDGE('',*,*,#7204,.T.);+#7204 = EDGE_CURVE('',#7160,#7205,#7207,.T.);+#7205 = VERTEX_POINT('',#7206);+#7206 = CARTESIAN_POINT('',(-0.888035632739,-8.22215425748E-02,1.75));+#7207 = SURFACE_CURVE('',#7208,(#7214,#7223),.PCURVE_S1.);+#7208 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#7209,#7210,#7211,#7212,#7213),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#7209 = CARTESIAN_POINT('',(-0.853943773623,-7.240938984592E-02,1.75));+#7210 = CARTESIAN_POINT('',(-0.860032651972,-7.731630945649E-02,1.75));+#7211 = CARTESIAN_POINT('',(-0.867745329785,-8.05871619524E-02,1.75));+#7212 = CARTESIAN_POINT('',(-0.877080811615,-8.22215425748E-02,1.75));+#7213 = CARTESIAN_POINT('',(-0.888035632739,-8.22215425748E-02,1.75));+#7214 = PCURVE('',#2438,#7215);+#7215 = DEFINITIONAL_REPRESENTATION('',(#7216),#7222);+#7216 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#7217,#7218,#7219,#7220,#7221),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#7217 = CARTESIAN_POINT('',(2.364884430662,0.728535928099));+#7218 = CARTESIAN_POINT('',(2.365190033029,0.736349947987));+#7219 = CARTESIAN_POINT('',(2.363213879183,0.744491120573));+#7220 = CARTESIAN_POINT('',(2.358956238141,0.752958405485));+#7221 = CARTESIAN_POINT('',(2.352420855223,0.761750269677));+#7222 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7223 = PCURVE('',#7224,#7231);+#7224 = SURFACE_OF_LINEAR_EXTRUSION('',#7225,#7229);+#7225 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#7226,#7227,#7228),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#7226 = CARTESIAN_POINT('',(-0.888035632739,-8.22215425748E-02,1.8000001+ ));+#7227 = CARTESIAN_POINT('',(-0.866119437593,-8.22215425748E-02,1.8000001+ ));+#7228 = CARTESIAN_POINT('',(-0.853943773623,-7.240938984592E-02,+ 1.8000001));+#7229 = VECTOR('',#7230,1.);+#7230 = DIRECTION('',(0.,0.,1.));+#7231 = DEFINITIONAL_REPRESENTATION('',(#7232),#7238);+#7232 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#7233,#7234,#7235,#7236,#7237),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#7233 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#7234 = CARTESIAN_POINT('',(0.749957030524,-5.00001E-02));+#7235 = CARTESIAN_POINT('',(0.499921488322,-5.00001E-02));+#7236 = CARTESIAN_POINT('',(0.249925250514,-5.00001E-02));+#7237 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#7238 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7239 = ORIENTED_EDGE('',*,*,#7240,.T.);+#7240 = EDGE_CURVE('',#7205,#7241,#7243,.T.);+#7241 = VERTEX_POINT('',#7242);+#7242 = CARTESIAN_POINT('',(-0.917615334032,-7.735127698674E-02,1.75));+#7243 = SURFACE_CURVE('',#7244,(#7250,#7259),.PCURVE_S1.);+#7244 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#7245,#7246,#7247,#7248,#7249),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#7245 = CARTESIAN_POINT('',(-0.888035632739,-8.22215425748E-02,1.75));+#7246 = CARTESIAN_POINT('',(-0.895484344493,-8.22215425748E-02,1.75));+#7247 = CARTESIAN_POINT('',(-0.902897276561,-8.140981632739E-02,1.75));+#7248 = CARTESIAN_POINT('',(-0.910274310327,-7.978634826431E-02,1.75));+#7249 = CARTESIAN_POINT('',(-0.917615334032,-7.735127698674E-02,1.75));+#7250 = PCURVE('',#2438,#7251);+#7251 = DEFINITIONAL_REPRESENTATION('',(#7252),#7258);+#7252 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#7253,#7254,#7255,#7256,#7257),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#7253 = CARTESIAN_POINT('',(2.352420855223,0.761750269677));+#7254 = CARTESIAN_POINT('',(2.347977132864,0.767728282591));+#7255 = CARTESIAN_POINT('',(2.342903299535,0.773193323915));+#7256 = CARTESIAN_POINT('',(2.337199413503,0.778145289169));+#7257 = CARTESIAN_POINT('',(2.330865652677,0.782584171343));+#7258 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7259 = PCURVE('',#7260,#7267);+#7260 = SURFACE_OF_LINEAR_EXTRUSION('',#7261,#7265);+#7261 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#7262,#7263,#7264),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#7262 = CARTESIAN_POINT('',(-0.917615334032,-7.735127698674E-02,+ 1.8000001));+#7263 = CARTESIAN_POINT('',(-0.902932915715,-8.22215425748E-02,1.8000001+ ));+#7264 = CARTESIAN_POINT('',(-0.888035632739,-8.22215425748E-02,1.8000001+ ));+#7265 = VECTOR('',#7266,1.);+#7266 = DIRECTION('',(0.,0.,1.));+#7267 = DEFINITIONAL_REPRESENTATION('',(#7268),#7274);+#7268 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#7269,#7270,#7271,#7272,#7273),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#7269 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#7270 = CARTESIAN_POINT('',(0.749997641643,-5.00001E-02));+#7271 = CARTESIAN_POINT('',(0.499994217135,-5.00001E-02));+#7272 = CARTESIAN_POINT('',(0.249993684486,-5.00001E-02));+#7273 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#7274 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7275 = ORIENTED_EDGE('',*,*,#7276,.T.);+#7276 = EDGE_CURVE('',#7241,#7277,#7279,.T.);+#7277 = VERTEX_POINT('',#7278);+#7278 = CARTESIAN_POINT('',(-0.948770709485,-6.202426469493E-02,1.75));+#7279 = SURFACE_CURVE('',#7280,(#7286,#7295),.PCURVE_S1.);+#7280 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#7281,#7282,#7283,#7284,#7285),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#7281 = CARTESIAN_POINT('',(-0.917615334032,-7.735127698674E-02,1.75));+#7282 = CARTESIAN_POINT('',(-0.924957496088,-7.491582810954E-02,1.75));+#7283 = CARTESIAN_POINT('',(-0.932597635492,-7.1549230871E-02,1.75));+#7284 = CARTESIAN_POINT('',(-0.940535488325,-6.725183986587E-02,1.75));+#7285 = CARTESIAN_POINT('',(-0.948770709485,-6.202426469493E-02,1.75));+#7286 = PCURVE('',#2438,#7287);+#7287 = DEFINITIONAL_REPRESENTATION('',(#7288),#7294);+#7288 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#7289,#7290,#7291,#7292,#7293),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#7289 = CARTESIAN_POINT('',(2.330865652677,0.782584171343));+#7290 = CARTESIAN_POINT('',(2.324530909692,0.787023741842));+#7291 = CARTESIAN_POINT('',(2.317271101306,0.791146955307));+#7292 = CARTESIAN_POINT('',(2.309086669548,0.79495381147));+#7293 = CARTESIAN_POINT('',(2.299978309537,0.798444397041));+#7294 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7295 = PCURVE('',#7296,#7303);+#7296 = SURFACE_OF_LINEAR_EXTRUSION('',#7297,#7301);+#7297 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#7298,#7299,#7300),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#7298 = CARTESIAN_POINT('',(-0.948770709485,-6.202426469493E-02,+ 1.8000001));+#7299 = CARTESIAN_POINT('',(-0.932297752349,-7.248101139869E-02,+ 1.8000001));+#7300 = CARTESIAN_POINT('',(-0.917615334032,-7.735127698674E-02,+ 1.8000001));+#7301 = VECTOR('',#7302,1.);+#7302 = DIRECTION('',(0.,0.,1.));+#7303 = DEFINITIONAL_REPRESENTATION('',(#7304),#7310);+#7304 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#7305,#7306,#7307,#7308,#7309),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#7305 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#7306 = CARTESIAN_POINT('',(0.749967549698,-5.00001E-02));+#7307 = CARTESIAN_POINT('',(0.499952919094,-5.00001E-02));+#7308 = CARTESIAN_POINT('',(0.249961834165,-5.00001E-02));+#7309 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#7310 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7311 = ORIENTED_EDGE('',*,*,#7312,.T.);+#7312 = EDGE_CURVE('',#7277,#7313,#7315,.T.);+#7313 = VERTEX_POINT('',#7314);+#7314 = CARTESIAN_POINT('',(-0.948770709485,-9.282153238409E-02,1.75));+#7315 = SURFACE_CURVE('',#7316,(#7320,#7327),.PCURVE_S1.);+#7316 = LINE('',#7317,#7318);+#7317 = CARTESIAN_POINT('',(-0.948770709485,1.08367487419,1.75));+#7318 = VECTOR('',#7319,1.);+#7319 = DIRECTION('',(0.,-1.,0.));+#7320 = PCURVE('',#2438,#7321);+#7321 = DEFINITIONAL_REPRESENTATION('',(#7322),#7326);+#7322 = LINE('',#7323,#7324);+#7323 = CARTESIAN_POINT('',(1.380489883407,0.114947834464));+#7324 = VECTOR('',#7325,1.);+#7325 = DIRECTION('',(0.802556617983,0.596575959062));+#7326 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7327 = PCURVE('',#7328,#7333);+#7328 = PLANE('',#7329);+#7329 = AXIS2_PLACEMENT_3D('',#7330,#7331,#7332);+#7330 = CARTESIAN_POINT('',(-0.948770709485,-9.282153238409E-02,+ 1.8000001));+#7331 = DIRECTION('',(1.,0.,0.));+#7332 = DIRECTION('',(0.,1.,0.));+#7333 = DEFINITIONAL_REPRESENTATION('',(#7334),#7337);+#7334 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#7335,#7336),.UNSPECIFIED.,.F.,+ .F.,(2,2),(1.145699138885,1.176496406575),.PIECEWISE_BEZIER_KNOTS.);+#7335 = CARTESIAN_POINT('',(3.079726768917E-02,-5.00001E-02));+#7336 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#7337 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7338 = ORIENTED_EDGE('',*,*,#7339,.T.);+#7339 = EDGE_CURVE('',#7313,#7340,#7342,.T.);+#7340 = VERTEX_POINT('',#7341);+#7341 = CARTESIAN_POINT('',(-0.918259928007,-0.102490442007,1.75));+#7342 = SURFACE_CURVE('',#7343,(#7349,#7358),.PCURVE_S1.);+#7343 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#7344,#7345,#7346,#7347,#7348),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#7344 = CARTESIAN_POINT('',(-0.948770709485,-9.282153238409E-02,1.75));+#7345 = CARTESIAN_POINT('',(-0.941107501911,-9.604437669064E-02,1.75));+#7346 = CARTESIAN_POINT('',(-0.933467931892,-9.873019980234E-02,1.75));+#7347 = CARTESIAN_POINT('',(-0.925852055784,-0.100878905451,1.75));+#7348 = CARTESIAN_POINT('',(-0.918259928007,-0.102490442007,1.75));+#7349 = PCURVE('',#2438,#7350);+#7350 = DEFINITIONAL_REPRESENTATION('',(#7351),#7357);+#7351 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#7352,#7353,#7354,#7355,#7356),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#7352 = CARTESIAN_POINT('',(2.324694860537,0.816817306549));+#7353 = CARTESIAN_POINT('',(2.331853060971,0.812589820029));+#7354 = CARTESIAN_POINT('',(2.338566169895,0.808060930051));+#7355 = CARTESIAN_POINT('',(2.344834076427,0.803230624411));+#7356 = CARTESIAN_POINT('',(2.350656706666,0.798098915986));+#7357 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7358 = PCURVE('',#7359,#7366);+#7359 = SURFACE_OF_LINEAR_EXTRUSION('',#7360,#7364);+#7360 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#7361,#7362,#7363),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#7361 = CARTESIAN_POINT('',(-0.918259928007,-0.102490442007,1.8000001));+#7362 = CARTESIAN_POINT('',(-0.933443697193,-9.926747213299E-02,+ 1.8000001));+#7363 = CARTESIAN_POINT('',(-0.948770709485,-9.282153238409E-02,+ 1.8000001));+#7364 = VECTOR('',#7365,1.);+#7365 = DIRECTION('',(0.,0.,1.));+#7366 = DEFINITIONAL_REPRESENTATION('',(#7367),#7373);+#7367 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#7368,#7369,#7370,#7371,#7372),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#7368 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#7369 = CARTESIAN_POINT('',(0.750009740077,-5.00001E-02));+#7370 = CARTESIAN_POINT('',(0.500011832339,-5.00001E-02));+#7371 = CARTESIAN_POINT('',(0.25000800802,-5.00001E-02));+#7372 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#7373 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7374 = ORIENTED_EDGE('',*,*,#7375,.T.);+#7375 = EDGE_CURVE('',#7340,#7376,#7378,.T.);+#7376 = VERTEX_POINT('',#7377);+#7377 = CARTESIAN_POINT('',(-0.888035632739,-0.105713411882,1.75));+#7378 = SURFACE_CURVE('',#7379,(#7385,#7394),.PCURVE_S1.);+#7379 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#7380,#7381,#7382,#7383,#7384),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#7380 = CARTESIAN_POINT('',(-0.918259928007,-0.102490442007,1.75));+#7381 = CARTESIAN_POINT('',(-0.91066818135,-0.104101897666,1.75));+#7382 = CARTESIAN_POINT('',(-0.90310018064,-0.105176238163,1.75));+#7383 = CARTESIAN_POINT('',(-0.895555980287,-0.105713411882,1.75));+#7384 = CARTESIAN_POINT('',(-0.888035632739,-0.105713411882,1.75));+#7385 = PCURVE('',#2438,#7386);+#7386 = DEFINITIONAL_REPRESENTATION('',(#7387),#7393);+#7387 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#7388,#7389,#7390,#7391,#7392),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#7388 = CARTESIAN_POINT('',(2.350656706666,0.798098915986));+#7389 = CARTESIAN_POINT('',(2.356479044611,0.79296746517));+#7390 = CARTESIAN_POINT('',(2.361856150969,0.787534641827));+#7391 = CARTESIAN_POINT('',(2.366787951853,0.781800458833));+#7392 = CARTESIAN_POINT('',(2.371274410404,0.775764954139));+#7393 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7394 = PCURVE('',#7395,#7402);+#7395 = SURFACE_OF_LINEAR_EXTRUSION('',#7396,#7400);+#7396 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#7397,#7398,#7399),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#7397 = CARTESIAN_POINT('',(-0.888035632739,-0.105713411882,1.8000001));+#7398 = CARTESIAN_POINT('',(-0.90307615882,-0.105713411882,1.8000001));+#7399 = CARTESIAN_POINT('',(-0.918259928007,-0.102490442007,1.8000001));+#7400 = VECTOR('',#7401,1.);+#7401 = DIRECTION('',(0.,0.,1.));+#7402 = DEFINITIONAL_REPRESENTATION('',(#7403),#7409);+#7403 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#7404,#7405,#7406,#7407,#7408),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#7404 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#7405 = CARTESIAN_POINT('',(0.750004542252,-5.00001E-02));+#7406 = CARTESIAN_POINT('',(0.500004901169,-5.00001E-02));+#7407 = CARTESIAN_POINT('',(0.250002809325,-5.00001E-02));+#7408 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#7409 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7410 = ORIENTED_EDGE('',*,*,#7411,.T.);+#7411 = EDGE_CURVE('',#7376,#7412,#7414,.T.);+#7412 = VERTEX_POINT('',#7413);+#7413 = CARTESIAN_POINT('',(-0.833030280216,-8.967018406241E-02,1.75));+#7414 = SURFACE_CURVE('',#7415,(#7421,#7430),.PCURVE_S1.);+#7415 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#7416,#7417,#7418,#7419,#7420),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#7416 = CARTESIAN_POINT('',(-0.888035632739,-0.105713411882,1.75));+#7417 = CARTESIAN_POINT('',(-0.870002674425,-0.105713411882,1.75));+#7418 = CARTESIAN_POINT('',(-0.854814765977,-0.103044187521,1.75));+#7419 = CARTESIAN_POINT('',(-0.842489074333,-9.769582755562E-02,1.75));+#7420 = CARTESIAN_POINT('',(-0.833030280216,-8.967018406241E-02,1.75));+#7421 = PCURVE('',#2438,#7422);+#7422 = DEFINITIONAL_REPRESENTATION('',(#7423),#7429);+#7423 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#7424,#7425,#7426,#7427,#7428),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#7424 = CARTESIAN_POINT('',(2.371274410404,0.775764954139));+#7425 = CARTESIAN_POINT('',(2.382032439805,0.761292484102));+#7426 = CARTESIAN_POINT('',(2.388950977178,0.747510932581));+#7427 = CARTESIAN_POINT('',(2.392011826806,0.734428164205));+#7428 = CARTESIAN_POINT('',(2.391213682679,0.722049040424));+#7429 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7430 = PCURVE('',#7431,#7438);+#7431 = SURFACE_OF_LINEAR_EXTRUSION('',#7432,#7436);+#7432 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#7433,#7434,#7435),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#7433 = CARTESIAN_POINT('',(-0.833030280216,-8.967018406241E-02,+ 1.8000001));+#7434 = CARTESIAN_POINT('',(-0.851938370146,-0.105713411882,1.8000001));+#7435 = CARTESIAN_POINT('',(-0.888035632739,-0.105713411882,1.8000001));+#7436 = VECTOR('',#7437,1.);+#7437 = DIRECTION('',(0.,0.,1.));+#7438 = DEFINITIONAL_REPRESENTATION('',(#7439),#7445);+#7439 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#7440,#7441,#7442,#7443,#7444),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#7440 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#7441 = CARTESIAN_POINT('',(0.750217093778,-5.00001E-02));+#7442 = CARTESIAN_POINT('',(0.500228723538,-5.00001E-02));+#7443 = CARTESIAN_POINT('',(0.250125585185,-5.00001E-02));+#7444 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#7445 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7446 = ORIENTED_EDGE('',*,*,#7447,.T.);+#7447 = EDGE_CURVE('',#7412,#7448,#7450,.T.);+#7448 = VERTEX_POINT('',#7449);+#7449 = CARTESIAN_POINT('',(-0.814122190285,-4.311617476483E-02,1.75));+#7450 = SURFACE_CURVE('',#7451,(#7460,#7472),.PCURVE_S1.);+#7451 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#7452,#7453,#7454,#7455,#7456,+ #7457,#7458,#7459),.UNSPECIFIED.,.F.,.F.,(5,3,5),(0.,0.22396330348,+ 1.),.UNSPECIFIED.);+#7452 = CARTESIAN_POINT('',(-0.833030280216,-8.967018406241E-02,1.75));+#7453 = CARTESIAN_POINT('',(-0.830912652779,-8.787340926769E-02,1.75));+#7454 = CARTESIAN_POINT('',(-0.828953056531,-8.595558899661E-02,1.75));+#7455 = CARTESIAN_POINT('',(-0.827151558099,-8.391673687808E-02,1.75));+#7456 = CARTESIAN_POINT('',(-0.819813883461,-7.427300141958E-02,1.75));+#7457 = CARTESIAN_POINT('',(-0.816018125323,-6.533645085789E-02,1.75));+#7458 = CARTESIAN_POINT('',(-0.814122190285,-5.494896012193E-02,1.75));+#7459 = CARTESIAN_POINT('',(-0.814122190285,-4.311617476483E-02,1.75));+#7460 = PCURVE('',#2438,#7461);+#7461 = DEFINITIONAL_REPRESENTATION('',(#7462),#7471);+#7462 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#7463,#7464,#7465,#7466,#7467,+ #7468,#7469,#7470),.UNSPECIFIED.,.F.,.F.,(5,3,5),(0.,0.22396330348,+ 1.),.UNSPECIFIED.);+#7463 = CARTESIAN_POINT('',(2.391213682679,0.722049040424));+#7464 = CARTESIAN_POINT('',(2.391034994796,0.719277611864));+#7465 = CARTESIAN_POINT('',(2.390664883456,0.716560799459));+#7466 = CARTESIAN_POINT('',(2.39010331985,0.713898664812));+#7467 = CARTESIAN_POINT('',(2.38674115642,0.70225654474));+#7468 = CARTESIAN_POINT('',(2.381833526676,0.693878902705));+#7469 = CARTESIAN_POINT('',(2.374628046505,0.686160380245));+#7470 = CARTESIAN_POINT('',(2.365131566308,0.679101224972));+#7471 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7472 = PCURVE('',#7473,#7480);+#7473 = SURFACE_OF_LINEAR_EXTRUSION('',#7474,#7478);+#7474 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#7475,#7476,#7477),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#7475 = CARTESIAN_POINT('',(-0.814122190285,-4.311617476483E-02,+ 1.8000001));+#7476 = CARTESIAN_POINT('',(-0.814122190285,-7.362695624294E-02,+ 1.8000001));+#7477 = CARTESIAN_POINT('',(-0.833030280216,-8.967018406241E-02,+ 1.8000001));+#7478 = VECTOR('',#7479,1.);+#7479 = DIRECTION('',(0.,0.,1.));+#7480 = DEFINITIONAL_REPRESENTATION('',(#7481),#7490);+#7481 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#7482,#7483,#7484,#7485,#7486,+ #7487,#7488,#7489),.UNSPECIFIED.,.F.,.F.,(5,3,5),(0.,0.22396330348,+ 1.),.UNSPECIFIED.);+#7482 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#7483 = CARTESIAN_POINT('',(0.944002079415,-5.00001E-02));+#7484 = CARTESIAN_POINT('',(0.888002066575,-5.00001E-02));+#7485 = CARTESIAN_POINT('',(0.832001020257,-5.00001E-02));+#7486 = CARTESIAN_POINT('',(0.581955502142,-5.00001E-02));+#7487 = CARTESIAN_POINT('',(0.387911297471,-5.00001E-02));+#7488 = CARTESIAN_POINT('',(0.19391154182,-5.00001E-02));+#7489 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#7490 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7491 = ORIENTED_EDGE('',*,*,#7492,.T.);+#7492 = EDGE_CURVE('',#7448,#7493,#7495,.T.);+#7493 = VERTEX_POINT('',#7494);+#7494 = CARTESIAN_POINT('',(-0.827873528416,-2.148646582965E-03,1.75));+#7495 = SURFACE_CURVE('',#7496,(#7502,#7511),.PCURVE_S1.);+#7496 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#7497,#7498,#7499,#7500,#7501),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#7497 = CARTESIAN_POINT('',(-0.814122190285,-4.311617476483E-02,1.75));+#7498 = CARTESIAN_POINT('',(-0.814122190285,-3.015732186566E-02,1.75));+#7499 = CARTESIAN_POINT('',(-0.8164124358,-1.900671685657E-02,1.75));+#7500 = CARTESIAN_POINT('',(-0.820996800079,-9.670068202468E-03,1.75));+#7501 = CARTESIAN_POINT('',(-0.827873528416,-2.148646582965E-03,1.75));+#7502 = PCURVE('',#2438,#7503);+#7503 = DEFINITIONAL_REPRESENTATION('',(#7504),#7510);+#7504 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#7505,#7506,#7507,#7508,#7509),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#7505 = CARTESIAN_POINT('',(2.365131566308,0.679101224972));+#7506 = CARTESIAN_POINT('',(2.354731353152,0.671370284875));+#7507 = CARTESIAN_POINT('',(2.344416055893,0.666556153693));+#7508 = CARTESIAN_POINT('',(2.33418794521,0.664665345458));+#7509 = CARTESIAN_POINT('',(2.324049087709,0.66569720998));+#7510 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7511 = PCURVE('',#7512,#7519);+#7512 = SURFACE_OF_LINEAR_EXTRUSION('',#7513,#7517);+#7513 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#7514,#7515,#7516),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#7514 = CARTESIAN_POINT('',(-0.827873528416,-2.148646582965E-03,+ 1.8000001));+#7515 = CARTESIAN_POINT('',(-0.814122190285,-1.718917266372E-02,+ 1.8000001));+#7516 = CARTESIAN_POINT('',(-0.814122190285,-4.311617476483E-02,+ 1.8000001));+#7517 = VECTOR('',#7518,1.);+#7518 = DIRECTION('',(0.,0.,1.));+#7519 = DEFINITIONAL_REPRESENTATION('',(#7520),#7526);+#7520 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#7521,#7522,#7523,#7524,#7525),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#7521 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#7522 = CARTESIAN_POINT('',(0.750089639199,-5.00001E-02));+#7523 = CARTESIAN_POINT('',(0.500085493116,-5.00001E-02));+#7524 = CARTESIAN_POINT('',(0.250038515246,-5.00001E-02));+#7525 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#7526 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7527 = ORIENTED_EDGE('',*,*,#7528,.T.);+#7528 = EDGE_CURVE('',#7493,#7529,#7531,.T.);+#7529 = VERTEX_POINT('',#7530);+#7530 = CARTESIAN_POINT('',(-0.871705918709,1.991079166881E-02,1.75));+#7531 = SURFACE_CURVE('',#7532,(#7538,#7547),.PCURVE_S1.);+#7532 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#7533,#7534,#7535,#7536,#7537),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#7533 = CARTESIAN_POINT('',(-0.827873528416,-2.148646582965E-03,1.75));+#7534 = CARTESIAN_POINT('',(-0.83475213763,5.374832244581E-03,1.75));+#7535 = CARTESIAN_POINT('',(-0.84435374512,1.155919028021E-02,1.75));+#7536 = CARTESIAN_POINT('',(-0.856675123242,1.640360605983E-02,1.75));+#7537 = CARTESIAN_POINT('',(-0.871705918709,1.991079166881E-02,1.75));+#7538 = PCURVE('',#2438,#7539);+#7539 = DEFINITIONAL_REPRESENTATION('',(#7540),#7546);+#7540 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#7541,#7542,#7543,#7544,#7545),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#7541 = CARTESIAN_POINT('',(2.324049087709,0.66569720998));+#7542 = CARTESIAN_POINT('',(2.313907457097,0.66672935673));+#7543 = CARTESIAN_POINT('',(2.303216071431,0.670745751038));+#7544 = CARTESIAN_POINT('',(2.291977515517,0.677744292602));+#7545 = CARTESIAN_POINT('',(2.280195789274,0.68771505436));+#7546 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7547 = PCURVE('',#7548,#7555);+#7548 = SURFACE_OF_LINEAR_EXTRUSION('',#7549,#7553);+#7549 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#7550,#7551,#7552),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#7550 = CARTESIAN_POINT('',(-0.871705918709,1.991079166881E-02,1.8000001+ ));+#7551 = CARTESIAN_POINT('',(-0.841624866547,1.289187949779E-02,1.8000001+ ));+#7552 = CARTESIAN_POINT('',(-0.827873528416,-2.148646582965E-03,+ 1.8000001));+#7553 = VECTOR('',#7554,1.);+#7554 = DIRECTION('',(0.,0.,1.));+#7555 = DEFINITIONAL_REPRESENTATION('',(#7556),#7562);+#7556 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#7557,#7558,#7559,#7560,#7561),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#7557 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#7558 = CARTESIAN_POINT('',(0.749893095921,-5.00001E-02));+#7559 = CARTESIAN_POINT('',(0.499820776938,-5.00001E-02));+#7560 = CARTESIAN_POINT('',(0.249838260084,-5.00001E-02));+#7561 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#7562 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7563 = ORIENTED_EDGE('',*,*,#7564,.T.);+#7564 = EDGE_CURVE('',#7529,#7565,#7567,.T.);+#7565 = VERTEX_POINT('',#7566);+#7566 = CARTESIAN_POINT('',(-0.886889687895,2.334862620155E-02,1.75));+#7567 = SURFACE_CURVE('',#7568,(#7572,#7579),.PCURVE_S1.);+#7568 = LINE('',#7569,#7570);+#7569 = CARTESIAN_POINT('',(-1.505024912893,0.163303771484,1.75));+#7570 = VECTOR('',#7571,1.);+#7571 = DIRECTION('',(-0.975313298974,0.220825652598,0.));+#7572 = PCURVE('',#2438,#7573);+#7573 = DEFINITIONAL_REPRESENTATION('',(#7574),#7578);+#7574 = LINE('',#7575,#7576);+#7575 = CARTESIAN_POINT('',(1.787291918004,1.110444599981));+#7576 = VECTOR('',#7577,1.);+#7577 = DIRECTION('',(-0.759073555634,0.651004867214));+#7578 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7579 = PCURVE('',#7580,#7585);+#7580 = PLANE('',#7581);+#7581 = AXIS2_PLACEMENT_3D('',#7582,#7583,#7584);+#7582 = CARTESIAN_POINT('',(-0.886889687895,2.334862620155E-02,1.8000001+ ));+#7583 = DIRECTION('',(-0.220825652598,-0.975313298974,0.));+#7584 = DIRECTION('',(0.975313298974,-0.220825652598,0.));+#7585 = DEFINITIONAL_REPRESENTATION('',(#7586),#7589);+#7586 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#7587,#7588),.UNSPECIFIED.,.F.,+ .F.,(2,2),(-0.649349285866,-0.633781191796),.PIECEWISE_BEZIER_KNOTS.);+#7587 = CARTESIAN_POINT('',(1.556809407015E-02,-5.00001E-02));+#7588 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#7589 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7590 = ORIENTED_EDGE('',*,*,#7591,.T.);+#7591 = EDGE_CURVE('',#7565,#7592,#7594,.T.);+#7592 = VERTEX_POINT('',#7593);+#7593 = CARTESIAN_POINT('',(-0.916039659871,3.581077638275E-02,1.75));+#7594 = SURFACE_CURVE('',#7595,(#7601,#7610),.PCURVE_S1.);+#7595 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#7596,#7597,#7598,#7599,#7600),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#7596 = CARTESIAN_POINT('',(-0.886889687895,2.334862620155E-02,1.75));+#7597 = CARTESIAN_POINT('',(-0.897556746815,2.585431118281E-02,1.75));+#7598 = CARTESIAN_POINT('',(-0.905973578648,2.876642764315E-02,1.75));+#7599 = CARTESIAN_POINT('',(-0.912135110441,3.208533472494E-02,1.75));+#7600 = CARTESIAN_POINT('',(-0.916039659871,3.581077638275E-02,1.75));+#7601 = PCURVE('',#2438,#7602);+#7602 = DEFINITIONAL_REPRESENTATION('',(#7603),#7609);+#7603 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#7604,#7605,#7606,#7607,#7608),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#7604 = CARTESIAN_POINT('',(2.268378460754,0.697849959373));+#7605 = CARTESIAN_POINT('',(2.260003795784,0.704916046683));+#7606 = CARTESIAN_POINT('',(2.252645377924,0.709933732102));+#7607 = CARTESIAN_POINT('',(2.246305945342,0.712898730044));+#7608 = CARTESIAN_POINT('',(2.240986707164,0.713809843099));+#7609 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7610 = PCURVE('',#7611,#7618);+#7611 = SURFACE_OF_LINEAR_EXTRUSION('',#7612,#7616);+#7612 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#7613,#7614,#7615),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#7613 = CARTESIAN_POINT('',(-0.916039659871,3.581077638275E-02,1.8000001+ ));+#7614 = CARTESIAN_POINT('',(-0.908232910619,2.836213489514E-02,1.8000001+ ));+#7615 = CARTESIAN_POINT('',(-0.886889687895,2.334862620155E-02,1.8000001+ ));+#7616 = VECTOR('',#7617,1.);+#7617 = DIRECTION('',(0.,0.,1.));+#7618 = DEFINITIONAL_REPRESENTATION('',(#7619),#7625);+#7619 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#7620,#7621,#7622,#7623,#7624),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#7620 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#7621 = CARTESIAN_POINT('',(0.750106648418,-5.00001E-02));+#7622 = CARTESIAN_POINT('',(0.500121310106,-5.00001E-02));+#7623 = CARTESIAN_POINT('',(0.250075242849,-5.00001E-02));+#7624 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#7625 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7626 = ORIENTED_EDGE('',*,*,#7627,.T.);+#7627 = EDGE_CURVE('',#7592,#7628,#7630,.T.);+#7628 = VERTEX_POINT('',#7629);+#7629 = CARTESIAN_POINT('',(-0.923846409122,5.744048531793E-02,1.75));+#7630 = SURFACE_CURVE('',#7631,(#7637,#7646),.PCURVE_S1.);+#7631 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#7632,#7633,#7634,#7635,#7636),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#7632 = CARTESIAN_POINT('',(-0.916039659871,3.581077638275E-02,1.75));+#7633 = CARTESIAN_POINT('',(-0.919943226638,3.95352804539E-02,1.75));+#7634 = CARTESIAN_POINT('',(-0.922545596589,4.438201967031E-02,1.75));+#7635 = CARTESIAN_POINT('',(-0.923846409122,5.035080254367E-02,1.75));+#7636 = CARTESIAN_POINT('',(-0.923846409122,5.744048531793E-02,1.75));+#7637 = PCURVE('',#2438,#7638);+#7638 = DEFINITIONAL_REPRESENTATION('',(#7639),#7645);+#7639 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#7640,#7641,#7642,#7643,#7644),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#7640 = CARTESIAN_POINT('',(2.240986707164,0.713809843099));+#7641 = CARTESIAN_POINT('',(2.235668807685,0.714720726853));+#7642 = CARTESIAN_POINT('',(2.230226513702,0.713917827984));+#7643 = CARTESIAN_POINT('',(2.224660194021,0.711400971324));+#7644 = CARTESIAN_POINT('',(2.218970322191,0.707171437024));+#7645 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7646 = PCURVE('',#7647,#7654);+#7647 = SURFACE_OF_LINEAR_EXTRUSION('',#7648,#7652);+#7648 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#7649,#7650,#7651),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#7649 = CARTESIAN_POINT('',(-0.923846409122,5.744048531793E-02,1.8000001+ ));+#7650 = CARTESIAN_POINT('',(-0.923846409122,4.325941787036E-02,1.8000001+ ));+#7651 = CARTESIAN_POINT('',(-0.916039659871,3.581077638275E-02,1.8000001+ ));+#7652 = VECTOR('',#7653,1.);+#7653 = DIRECTION('',(0.,0.,1.));+#7654 = DEFINITIONAL_REPRESENTATION('',(#7655),#7661);+#7655 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#7656,#7657,#7658,#7659,#7660),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#7656 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#7657 = CARTESIAN_POINT('',(0.749987693908,-5.00001E-02));+#7658 = CARTESIAN_POINT('',(0.499971787526,-5.00001E-02));+#7659 = CARTESIAN_POINT('',(0.249969996986,-5.00001E-02));+#7660 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#7661 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7662 = ORIENTED_EDGE('',*,*,#7663,.T.);+#7663 = EDGE_CURVE('',#7628,#7664,#7666,.T.);+#7664 = VERTEX_POINT('',#7665);+#7665 = CARTESIAN_POINT('',(-0.911957231363,8.315262276075E-02,1.75));+#7666 = SURFACE_CURVE('',#7667,(#7673,#7682),.PCURVE_S1.);+#7667 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#7668,#7669,#7670,#7671,#7672),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#7668 = CARTESIAN_POINT('',(-0.923846409122,5.744048531793E-02,1.75));+#7669 = CARTESIAN_POINT('',(-0.923846409122,6.553297838113E-02,1.75));+#7670 = CARTESIAN_POINT('',(-0.921865243076,7.251670330769E-02,1.75));+#7671 = CARTESIAN_POINT('',(-0.917901630184,7.838994177761E-02,1.75));+#7672 = CARTESIAN_POINT('',(-0.911957231363,8.315262276075E-02,1.75));+#7673 = PCURVE('',#2438,#7674);+#7674 = DEFINITIONAL_REPRESENTATION('',(#7675),#7681);+#7675 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#7676,#7677,#7678,#7679,#7680),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#7676 = CARTESIAN_POINT('',(2.218970322191,0.707171437024));+#7677 = CARTESIAN_POINT('',(2.212475638327,0.702343650213));+#7678 = CARTESIAN_POINT('',(2.208052719704,0.696587329895));+#7679 = CARTESIAN_POINT('',(2.205703709463,0.689902473265));+#7680 = CARTESIAN_POINT('',(2.205427673748,0.682290455676));+#7681 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7682 = PCURVE('',#7683,#7690);+#7683 = SURFACE_OF_LINEAR_EXTRUSION('',#7684,#7688);+#7684 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#7685,#7686,#7687),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#7685 = CARTESIAN_POINT('',(-0.911957231363,8.315262276075E-02,1.8000001+ ));+#7686 = CARTESIAN_POINT('',(-0.923846409122,7.362695624294E-02,1.8000001+ ));+#7687 = CARTESIAN_POINT('',(-0.923846409122,5.744048531793E-02,1.8000001+ ));+#7688 = VECTOR('',#7689,1.);+#7689 = DIRECTION('',(0.,0.,1.));+#7690 = DEFINITIONAL_REPRESENTATION('',(#7691),#7697);+#7691 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#7692,#7693,#7694,#7695,#7696),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#7692 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#7693 = CARTESIAN_POINT('',(0.750022932711,-5.00001E-02));+#7694 = CARTESIAN_POINT('',(0.50000996387,-5.00001E-02));+#7695 = CARTESIAN_POINT('',(0.249992007081,-5.00001E-02));+#7696 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#7697 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7698 = ORIENTED_EDGE('',*,*,#7699,.T.);+#7699 = EDGE_CURVE('',#7664,#7700,#7702,.T.);+#7700 = VERTEX_POINT('',#7701);+#7701 = CARTESIAN_POINT('',(-0.879584289513,9.267828927856E-02,1.75));+#7702 = SURFACE_CURVE('',#7703,(#7709,#7718),.PCURVE_S1.);+#7703 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#7704,#7705,#7706,#7707,#7708),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#7704 = CARTESIAN_POINT('',(-0.911957231363,8.315262276075E-02,1.75));+#7705 = CARTESIAN_POINT('',(-0.906011854923,8.791608701671E-02,1.75));+#7706 = CARTESIAN_POINT('',(-0.89863375816,9.109144673631E-02,1.75));+#7707 = CARTESIAN_POINT('',(-0.889823693073,9.267828927856E-02,1.75));+#7708 = CARTESIAN_POINT('',(-0.879584289513,9.267828927856E-02,1.75));+#7709 = PCURVE('',#2438,#7710);+#7710 = DEFINITIONAL_REPRESENTATION('',(#7711),#7717);+#7711 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#7712,#7713,#7714,#7715,#7716),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#7712 = CARTESIAN_POINT('',(2.205427673748,0.682290455676));+#7713 = CARTESIAN_POINT('',(2.205151592636,0.674677186211));+#7714 = CARTESIAN_POINT('',(2.207004781832,0.666861502555));+#7715 = CARTESIAN_POINT('',(2.210987123876,0.658844254404));+#7716 = CARTESIAN_POINT('',(2.217095705875,0.650626553312));+#7717 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7718 = PCURVE('',#7719,#7726);+#7719 = SURFACE_OF_LINEAR_EXTRUSION('',#7720,#7724);+#7720 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#7721,#7722,#7723),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#7721 = CARTESIAN_POINT('',(-0.879584289513,9.267828927856E-02,1.8000001+ ));+#7722 = CARTESIAN_POINT('',(-0.900068053604,9.267828927856E-02,1.8000001+ ));+#7723 = CARTESIAN_POINT('',(-0.911957231363,8.315262276075E-02,1.8000001+ ));+#7724 = VECTOR('',#7725,1.);+#7725 = DIRECTION('',(0.,0.,1.));+#7726 = DEFINITIONAL_REPRESENTATION('',(#7727),#7733);+#7727 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#7728,#7729,#7730,#7731,#7732),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#7728 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#7729 = CARTESIAN_POINT('',(0.749966879113,-5.00001E-02));+#7730 = CARTESIAN_POINT('',(0.499937564884,-5.00001E-02));+#7731 = CARTESIAN_POINT('',(0.249939501217,-5.00001E-02));+#7732 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#7733 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7734 = ORIENTED_EDGE('',*,*,#7735,.T.);+#7735 = EDGE_CURVE('',#7700,#6771,#7736,.T.);+#7736 = SURFACE_CURVE('',#7737,(#7743,#7752),.PCURVE_S1.);+#7737 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#7738,#7739,#7740,#7741,#7742),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#7738 = CARTESIAN_POINT('',(-0.879584289513,9.267828927856E-02,1.75));+#7739 = CARTESIAN_POINT('',(-0.872851819449,9.267828927856E-02,1.75));+#7740 = CARTESIAN_POINT('',(-0.866155134679,9.196206436642E-02,1.75));+#7741 = CARTESIAN_POINT('',(-0.859494318861,9.052960212209E-02,1.75));+#7742 = CARTESIAN_POINT('',(-0.852869450332,8.838099611263E-02,1.75));+#7743 = PCURVE('',#2438,#7744);+#7744 = DEFINITIONAL_REPRESENTATION('',(#7745),#7751);+#7745 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#7746,#7747,#7748,#7749,#7750),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#7746 = CARTESIAN_POINT('',(2.217095705875,0.650626553312));+#7747 = CARTESIAN_POINT('',(2.22111213566,0.645223364907));+#7748 = CARTESIAN_POINT('',(2.225682027843,0.64027617879));+#7749 = CARTESIAN_POINT('',(2.230805342482,0.635785069511));+#7750 = CARTESIAN_POINT('',(2.236481957751,0.631750044121));+#7751 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7752 = PCURVE('',#7753,#7760);+#7753 = SURFACE_OF_LINEAR_EXTRUSION('',#7754,#7758);+#7754 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#7755,#7756,#7757),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#7755 = CARTESIAN_POINT('',(-0.852869450332,8.838099611263E-02,1.8000001+ ));+#7756 = CARTESIAN_POINT('',(-0.866119437593,9.267828927856E-02,1.8000001+ ));+#7757 = CARTESIAN_POINT('',(-0.879584289513,9.267828927856E-02,1.8000001+ ));+#7758 = VECTOR('',#7759,1.);+#7759 = DIRECTION('',(0.,0.,1.));+#7760 = DEFINITIONAL_REPRESENTATION('',(#7761),#7767);+#7761 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#7762,#7763,#7764,#7765,#7766),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#7762 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#7763 = CARTESIAN_POINT('',(0.749998362261,-5.00001E-02));+#7764 = CARTESIAN_POINT('',(0.499995760827,-5.00001E-02));+#7765 = CARTESIAN_POINT('',(0.249995279179,-5.00001E-02));+#7766 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#7767 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7768 = ADVANCED_FACE('',(#7769),#7753,.T.);+#7769 = FACE_BOUND('',#7770,.T.);+#7770 = EDGE_LOOP('',(#7771,#7772,#7795,#7823));+#7771 = ORIENTED_EDGE('',*,*,#7735,.T.);+#7772 = ORIENTED_EDGE('',*,*,#7773,.T.);+#7773 = EDGE_CURVE('',#6771,#7774,#7776,.T.);+#7774 = VERTEX_POINT('',#7775);+#7775 = CARTESIAN_POINT('',(-0.852869450332,8.838099611263E-02,1.7000001+ ));+#7776 = SURFACE_CURVE('',#7777,(#7781,#7788),.PCURVE_S1.);+#7777 = LINE('',#7778,#7779);+#7778 = CARTESIAN_POINT('',(-0.852869450332,8.838099611263E-02,1.8000001+ ));+#7779 = VECTOR('',#7780,1.);+#7780 = DIRECTION('',(-0.,-0.,-1.));+#7781 = PCURVE('',#7753,#7782);+#7782 = DEFINITIONAL_REPRESENTATION('',(#7783),#7787);+#7783 = LINE('',#7784,#7785);+#7784 = CARTESIAN_POINT('',(0.,0.));+#7785 = VECTOR('',#7786,1.);+#7786 = DIRECTION('',(0.,-1.));+#7787 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7788 = PCURVE('',#6792,#7789);+#7789 = DEFINITIONAL_REPRESENTATION('',(#7790),#7794);+#7790 = LINE('',#7791,#7792);+#7791 = CARTESIAN_POINT('',(1.,0.));+#7792 = VECTOR('',#7793,1.);+#7793 = DIRECTION('',(0.,-1.));+#7794 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7795 = ORIENTED_EDGE('',*,*,#7796,.T.);+#7796 = EDGE_CURVE('',#7774,#7797,#7799,.T.);+#7797 = VERTEX_POINT('',#7798);+#7798 = CARTESIAN_POINT('',(-0.879584289513,9.267828927856E-02,1.7000001+ ));+#7799 = SURFACE_CURVE('',#7800,(#7804,#7811),.PCURVE_S1.);+#7800 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#7801,#7802,#7803),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#7801 = CARTESIAN_POINT('',(-0.852869450332,8.838099611263E-02,1.7000001+ ));+#7802 = CARTESIAN_POINT('',(-0.866119437593,9.267828927856E-02,1.7000001+ ));+#7803 = CARTESIAN_POINT('',(-0.879584289513,9.267828927856E-02,1.7000001+ ));+#7804 = PCURVE('',#7753,#7805);+#7805 = DEFINITIONAL_REPRESENTATION('',(#7806),#7810);+#7806 = LINE('',#7807,#7808);+#7807 = CARTESIAN_POINT('',(0.,-0.1));+#7808 = VECTOR('',#7809,1.);+#7809 = DIRECTION('',(1.,0.));+#7810 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7811 = PCURVE('',#7812,#7817);+#7812 = PLANE('',#7813);+#7813 = AXIS2_PLACEMENT_3D('',#7814,#7815,#7816);+#7814 = CARTESIAN_POINT('',(-0.971403120159,-0.101559361821,1.7000001));+#7815 = DIRECTION('',(0.,0.,1.));+#7816 = DIRECTION('',(1.,0.,0.));+#7817 = DEFINITIONAL_REPRESENTATION('',(#7818),#7822);+#7818 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#7819,#7820,#7821),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#7819 = CARTESIAN_POINT('',(0.118533669827,0.189940357934));+#7820 = CARTESIAN_POINT('',(0.105283682565,0.1942376511));+#7821 = CARTESIAN_POINT('',(9.181883064537E-02,0.1942376511));+#7822 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7823 = ORIENTED_EDGE('',*,*,#7824,.F.);+#7824 = EDGE_CURVE('',#7700,#7797,#7825,.T.);+#7825 = SURFACE_CURVE('',#7826,(#7830,#7837),.PCURVE_S1.);+#7826 = LINE('',#7827,#7828);+#7827 = CARTESIAN_POINT('',(-0.879584289513,9.267828927856E-02,1.8000001+ ));+#7828 = VECTOR('',#7829,1.);+#7829 = DIRECTION('',(-0.,-0.,-1.));+#7830 = PCURVE('',#7753,#7831);+#7831 = DEFINITIONAL_REPRESENTATION('',(#7832),#7836);+#7832 = LINE('',#7833,#7834);+#7833 = CARTESIAN_POINT('',(1.,0.));+#7834 = VECTOR('',#7835,1.);+#7835 = DIRECTION('',(0.,-1.));+#7836 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7837 = PCURVE('',#7719,#7838);+#7838 = DEFINITIONAL_REPRESENTATION('',(#7839),#7843);+#7839 = LINE('',#7840,#7841);+#7840 = CARTESIAN_POINT('',(0.,0.));+#7841 = VECTOR('',#7842,1.);+#7842 = DIRECTION('',(0.,-1.));+#7843 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7844 = ADVANCED_FACE('',(#7845),#7812,.T.);+#7845 = FACE_BOUND('',#7846,.F.);+#7846 = EDGE_LOOP('',(#7847,#7872,#7893,#7894,#7917,#7940,#7963,#7986,+ #8009,#8032,#8055,#8078,#8101,#8124,#8147,#8170,#8193,#8216,#8239,+ #8262,#8285,#8308,#8331,#8354,#8377,#8400,#8423,#8446));+#7847 = ORIENTED_EDGE('',*,*,#7848,.T.);+#7848 = EDGE_CURVE('',#7849,#7851,#7853,.T.);+#7849 = VERTEX_POINT('',#7850);+#7850 = CARTESIAN_POINT('',(-0.826441097361,0.104997196354,1.7000001));+#7851 = VERTEX_POINT('',#7852);+#7852 = CARTESIAN_POINT('',(-0.826441097361,7.563235972037E-02,1.7000001+ ));+#7853 = SURFACE_CURVE('',#7854,(#7858,#7865),.PCURVE_S1.);+#7854 = LINE('',#7855,#7856);+#7855 = CARTESIAN_POINT('',(-0.826441097361,0.104997196354,1.7000001));+#7856 = VECTOR('',#7857,1.);+#7857 = DIRECTION('',(0.,-1.,0.));+#7858 = PCURVE('',#7812,#7859);+#7859 = DEFINITIONAL_REPRESENTATION('',(#7860),#7864);+#7860 = LINE('',#7861,#7862);+#7861 = CARTESIAN_POINT('',(0.144962022797,0.206556558176));+#7862 = VECTOR('',#7863,1.);+#7863 = DIRECTION('',(0.,-1.));+#7864 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7865 = PCURVE('',#6824,#7866);+#7866 = DEFINITIONAL_REPRESENTATION('',(#7867),#7871);+#7867 = LINE('',#7868,#7869);+#7868 = CARTESIAN_POINT('',(0.,-0.1));+#7869 = VECTOR('',#7870,1.);+#7870 = DIRECTION('',(1.,0.));+#7871 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7872 = ORIENTED_EDGE('',*,*,#7873,.T.);+#7873 = EDGE_CURVE('',#7851,#7774,#7874,.T.);+#7874 = SURFACE_CURVE('',#7875,(#7879,#7886),.PCURVE_S1.);+#7875 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#7876,#7877,#7878),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#7876 = CARTESIAN_POINT('',(-0.826441097361,7.563235972037E-02,1.7000001+ ));+#7877 = CARTESIAN_POINT('',(-0.83961946307,8.40837029467E-02,1.7000001)+ );+#7878 = CARTESIAN_POINT('',(-0.852869450332,8.838099611263E-02,1.7000001+ ));+#7879 = PCURVE('',#7812,#7880);+#7880 = DEFINITIONAL_REPRESENTATION('',(#7881),#7885);+#7881 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#7882,#7883,#7884),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#7882 = CARTESIAN_POINT('',(0.144962022797,0.177191721542));+#7883 = CARTESIAN_POINT('',(0.131783657089,0.185643064768));+#7884 = CARTESIAN_POINT('',(0.118533669827,0.189940357934));+#7885 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7886 = PCURVE('',#6792,#7887);+#7887 = DEFINITIONAL_REPRESENTATION('',(#7888),#7892);+#7888 = LINE('',#7889,#7890);+#7889 = CARTESIAN_POINT('',(0.,-0.1));+#7890 = VECTOR('',#7891,1.);+#7891 = DIRECTION('',(1.,0.));+#7892 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7893 = ORIENTED_EDGE('',*,*,#7796,.T.);+#7894 = ORIENTED_EDGE('',*,*,#7895,.T.);+#7895 = EDGE_CURVE('',#7797,#7896,#7898,.T.);+#7896 = VERTEX_POINT('',#7897);+#7897 = CARTESIAN_POINT('',(-0.911957231363,8.315262276075E-02,1.7000001+ ));+#7898 = SURFACE_CURVE('',#7899,(#7903,#7910),.PCURVE_S1.);+#7899 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#7900,#7901,#7902),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#7900 = CARTESIAN_POINT('',(-0.879584289513,9.267828927856E-02,1.7000001+ ));+#7901 = CARTESIAN_POINT('',(-0.900068053604,9.267828927856E-02,1.7000001+ ));+#7902 = CARTESIAN_POINT('',(-0.911957231363,8.315262276075E-02,1.7000001+ ));+#7903 = PCURVE('',#7812,#7904);+#7904 = DEFINITIONAL_REPRESENTATION('',(#7905),#7909);+#7905 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#7906,#7907,#7908),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#7906 = CARTESIAN_POINT('',(9.181883064537E-02,0.1942376511));+#7907 = CARTESIAN_POINT('',(7.133506655444E-02,0.1942376511));+#7908 = CARTESIAN_POINT('',(5.944588879537E-02,0.184711984582));+#7909 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7910 = PCURVE('',#7719,#7911);+#7911 = DEFINITIONAL_REPRESENTATION('',(#7912),#7916);+#7912 = LINE('',#7913,#7914);+#7913 = CARTESIAN_POINT('',(0.,-0.1));+#7914 = VECTOR('',#7915,1.);+#7915 = DIRECTION('',(1.,0.));+#7916 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7917 = ORIENTED_EDGE('',*,*,#7918,.T.);+#7918 = EDGE_CURVE('',#7896,#7919,#7921,.T.);+#7919 = VERTEX_POINT('',#7920);+#7920 = CARTESIAN_POINT('',(-0.923846409122,5.744048531793E-02,1.7000001+ ));+#7921 = SURFACE_CURVE('',#7922,(#7926,#7933),.PCURVE_S1.);+#7922 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#7923,#7924,#7925),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#7923 = CARTESIAN_POINT('',(-0.911957231363,8.315262276075E-02,1.7000001+ ));+#7924 = CARTESIAN_POINT('',(-0.923846409122,7.362695624294E-02,1.7000001+ ));+#7925 = CARTESIAN_POINT('',(-0.923846409122,5.744048531793E-02,1.7000001+ ));+#7926 = PCURVE('',#7812,#7927);+#7927 = DEFINITIONAL_REPRESENTATION('',(#7928),#7932);+#7928 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#7929,#7930,#7931),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#7929 = CARTESIAN_POINT('',(5.944588879537E-02,0.184711984582));+#7930 = CARTESIAN_POINT('',(4.755671103629E-02,0.175186318064));+#7931 = CARTESIAN_POINT('',(4.755671103629E-02,0.158999847139));+#7932 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7933 = PCURVE('',#7683,#7934);+#7934 = DEFINITIONAL_REPRESENTATION('',(#7935),#7939);+#7935 = LINE('',#7936,#7937);+#7936 = CARTESIAN_POINT('',(0.,-0.1));+#7937 = VECTOR('',#7938,1.);+#7938 = DIRECTION('',(1.,0.));+#7939 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7940 = ORIENTED_EDGE('',*,*,#7941,.T.);+#7941 = EDGE_CURVE('',#7919,#7942,#7944,.T.);+#7942 = VERTEX_POINT('',#7943);+#7943 = CARTESIAN_POINT('',(-0.916039659871,3.581077638275E-02,1.7000001+ ));+#7944 = SURFACE_CURVE('',#7945,(#7949,#7956),.PCURVE_S1.);+#7945 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#7946,#7947,#7948),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#7946 = CARTESIAN_POINT('',(-0.923846409122,5.744048531793E-02,1.7000001+ ));+#7947 = CARTESIAN_POINT('',(-0.923846409122,4.325941787036E-02,1.7000001+ ));+#7948 = CARTESIAN_POINT('',(-0.916039659871,3.581077638275E-02,1.7000001+ ));+#7949 = PCURVE('',#7812,#7950);+#7950 = DEFINITIONAL_REPRESENTATION('',(#7951),#7955);+#7951 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#7952,#7953,#7954),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#7952 = CARTESIAN_POINT('',(4.755671103629E-02,0.158999847139));+#7953 = CARTESIAN_POINT('',(4.755671103629E-02,0.144818779692));+#7954 = CARTESIAN_POINT('',(5.536346028773E-02,0.137370138204));+#7955 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7956 = PCURVE('',#7647,#7957);+#7957 = DEFINITIONAL_REPRESENTATION('',(#7958),#7962);+#7958 = LINE('',#7959,#7960);+#7959 = CARTESIAN_POINT('',(0.,-0.1));+#7960 = VECTOR('',#7961,1.);+#7961 = DIRECTION('',(1.,0.));+#7962 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7963 = ORIENTED_EDGE('',*,*,#7964,.T.);+#7964 = EDGE_CURVE('',#7942,#7965,#7967,.T.);+#7965 = VERTEX_POINT('',#7966);+#7966 = CARTESIAN_POINT('',(-0.886889687895,2.334862620155E-02,1.7000001+ ));+#7967 = SURFACE_CURVE('',#7968,(#7972,#7979),.PCURVE_S1.);+#7968 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#7969,#7970,#7971),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#7969 = CARTESIAN_POINT('',(-0.916039659871,3.581077638275E-02,1.7000001+ ));+#7970 = CARTESIAN_POINT('',(-0.908232910619,2.836213489514E-02,1.7000001+ ));+#7971 = CARTESIAN_POINT('',(-0.886889687895,2.334862620155E-02,1.7000001+ ));+#7972 = PCURVE('',#7812,#7973);+#7973 = DEFINITIONAL_REPRESENTATION('',(#7974),#7978);+#7974 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#7975,#7976,#7977),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#7975 = CARTESIAN_POINT('',(5.536346028773E-02,0.137370138204));+#7976 = CARTESIAN_POINT('',(6.317020953917E-02,0.129921496717));+#7977 = CARTESIAN_POINT('',(8.451343226329E-02,0.124907988023));+#7978 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7979 = PCURVE('',#7611,#7980);+#7980 = DEFINITIONAL_REPRESENTATION('',(#7981),#7985);+#7981 = LINE('',#7982,#7983);+#7982 = CARTESIAN_POINT('',(0.,-0.1));+#7983 = VECTOR('',#7984,1.);+#7984 = DIRECTION('',(1.,0.));+#7985 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7986 = ORIENTED_EDGE('',*,*,#7987,.T.);+#7987 = EDGE_CURVE('',#7965,#7988,#7990,.T.);+#7988 = VERTEX_POINT('',#7989);+#7989 = CARTESIAN_POINT('',(-0.871705918709,1.991079166881E-02,1.7000001+ ));+#7990 = SURFACE_CURVE('',#7991,(#7995,#8002),.PCURVE_S1.);+#7991 = LINE('',#7992,#7993);+#7992 = CARTESIAN_POINT('',(-0.886889687895,2.334862620155E-02,1.7000001+ ));+#7993 = VECTOR('',#7994,1.);+#7994 = DIRECTION('',(0.975313298974,-0.220825652598,0.));+#7995 = PCURVE('',#7812,#7996);+#7996 = DEFINITIONAL_REPRESENTATION('',(#7997),#8001);+#7997 = LINE('',#7998,#7999);+#7998 = CARTESIAN_POINT('',(8.451343226329E-02,0.124907988023));+#7999 = VECTOR('',#8000,1.);+#8000 = DIRECTION('',(0.975313298974,-0.220825652598));+#8001 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8002 = PCURVE('',#7580,#8003);+#8003 = DEFINITIONAL_REPRESENTATION('',(#8004),#8008);+#8004 = LINE('',#8005,#8006);+#8005 = CARTESIAN_POINT('',(0.,-0.1));+#8006 = VECTOR('',#8007,1.);+#8007 = DIRECTION('',(1.,0.));+#8008 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8009 = ORIENTED_EDGE('',*,*,#8010,.T.);+#8010 = EDGE_CURVE('',#7988,#8011,#8013,.T.);+#8011 = VERTEX_POINT('',#8012);+#8012 = CARTESIAN_POINT('',(-0.827873528416,-2.148646582965E-03,+ 1.7000001));+#8013 = SURFACE_CURVE('',#8014,(#8018,#8025),.PCURVE_S1.);+#8014 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#8015,#8016,#8017),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#8015 = CARTESIAN_POINT('',(-0.871705918709,1.991079166881E-02,1.7000001+ ));+#8016 = CARTESIAN_POINT('',(-0.841624866547,1.289187949779E-02,1.7000001+ ));+#8017 = CARTESIAN_POINT('',(-0.827873528416,-2.148646582965E-03,+ 1.7000001));+#8018 = PCURVE('',#7812,#8019);+#8019 = DEFINITIONAL_REPRESENTATION('',(#8020),#8024);+#8020 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#8021,#8022,#8023),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#8021 = CARTESIAN_POINT('',(9.969720144958E-02,0.12147015349));+#8022 = CARTESIAN_POINT('',(0.129778253611,0.114451241319));+#8023 = CARTESIAN_POINT('',(0.143529591742,9.941071523852E-02));+#8024 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8025 = PCURVE('',#7548,#8026);+#8026 = DEFINITIONAL_REPRESENTATION('',(#8027),#8031);+#8027 = LINE('',#8028,#8029);+#8028 = CARTESIAN_POINT('',(0.,-0.1));+#8029 = VECTOR('',#8030,1.);+#8030 = DIRECTION('',(1.,0.));+#8031 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8032 = ORIENTED_EDGE('',*,*,#8033,.T.);+#8033 = EDGE_CURVE('',#8011,#8034,#8036,.T.);+#8034 = VERTEX_POINT('',#8035);+#8035 = CARTESIAN_POINT('',(-0.814122190285,-4.311617476483E-02,+ 1.7000001));+#8036 = SURFACE_CURVE('',#8037,(#8041,#8048),.PCURVE_S1.);+#8037 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#8038,#8039,#8040),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#8038 = CARTESIAN_POINT('',(-0.827873528416,-2.148646582965E-03,+ 1.7000001));+#8039 = CARTESIAN_POINT('',(-0.814122190285,-1.718917266372E-02,+ 1.7000001));+#8040 = CARTESIAN_POINT('',(-0.814122190285,-4.311617476483E-02,+ 1.7000001));+#8041 = PCURVE('',#7812,#8042);+#8042 = DEFINITIONAL_REPRESENTATION('',(#8043),#8047);+#8043 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#8044,#8045,#8046),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#8044 = CARTESIAN_POINT('',(0.143529591742,9.941071523852E-02));+#8045 = CARTESIAN_POINT('',(0.157280929873,8.437018915776E-02));+#8046 = CARTESIAN_POINT('',(0.157280929873,5.844318705665E-02));+#8047 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8048 = PCURVE('',#7512,#8049);+#8049 = DEFINITIONAL_REPRESENTATION('',(#8050),#8054);+#8050 = LINE('',#8051,#8052);+#8051 = CARTESIAN_POINT('',(0.,-0.1));+#8052 = VECTOR('',#8053,1.);+#8053 = DIRECTION('',(1.,0.));+#8054 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8055 = ORIENTED_EDGE('',*,*,#8056,.T.);+#8056 = EDGE_CURVE('',#8034,#8057,#8059,.T.);+#8057 = VERTEX_POINT('',#8058);+#8058 = CARTESIAN_POINT('',(-0.833030280216,-8.967018406241E-02,+ 1.7000001));+#8059 = SURFACE_CURVE('',#8060,(#8064,#8071),.PCURVE_S1.);+#8060 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#8061,#8062,#8063),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#8061 = CARTESIAN_POINT('',(-0.814122190285,-4.311617476483E-02,+ 1.7000001));+#8062 = CARTESIAN_POINT('',(-0.814122190285,-7.362695624294E-02,+ 1.7000001));+#8063 = CARTESIAN_POINT('',(-0.833030280216,-8.967018406241E-02,+ 1.7000001));+#8064 = PCURVE('',#7812,#8065);+#8065 = DEFINITIONAL_REPRESENTATION('',(#8066),#8070);+#8066 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#8067,#8068,#8069),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#8067 = CARTESIAN_POINT('',(0.157280929873,5.844318705665E-02));+#8068 = CARTESIAN_POINT('',(0.157280929873,2.793240557855E-02));+#8069 = CARTESIAN_POINT('',(0.138372839943,1.188917775907E-02));+#8070 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8071 = PCURVE('',#7473,#8072);+#8072 = DEFINITIONAL_REPRESENTATION('',(#8073),#8077);+#8073 = LINE('',#8074,#8075);+#8074 = CARTESIAN_POINT('',(0.,-0.1));+#8075 = VECTOR('',#8076,1.);+#8076 = DIRECTION('',(1.,0.));+#8077 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8078 = ORIENTED_EDGE('',*,*,#8079,.T.);+#8079 = EDGE_CURVE('',#8057,#8080,#8082,.T.);+#8080 = VERTEX_POINT('',#8081);+#8081 = CARTESIAN_POINT('',(-0.888035632739,-0.105713411882,1.7000001));+#8082 = SURFACE_CURVE('',#8083,(#8087,#8094),.PCURVE_S1.);+#8083 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#8084,#8085,#8086),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#8084 = CARTESIAN_POINT('',(-0.833030280216,-8.967018406241E-02,+ 1.7000001));+#8085 = CARTESIAN_POINT('',(-0.851938370146,-0.105713411882,1.7000001));+#8086 = CARTESIAN_POINT('',(-0.888035632739,-0.105713411882,1.7000001));+#8087 = PCURVE('',#7812,#8088);+#8088 = DEFINITIONAL_REPRESENTATION('',(#8089),#8093);+#8089 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#8090,#8091,#8092),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#8090 = CARTESIAN_POINT('',(0.138372839943,1.188917775907E-02));+#8091 = CARTESIAN_POINT('',(0.119464750013,-4.154050060399E-03));+#8092 = CARTESIAN_POINT('',(8.336748741905E-02,-4.154050060399E-03));+#8093 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8094 = PCURVE('',#7431,#8095);+#8095 = DEFINITIONAL_REPRESENTATION('',(#8096),#8100);+#8096 = LINE('',#8097,#8098);+#8097 = CARTESIAN_POINT('',(0.,-0.1));+#8098 = VECTOR('',#8099,1.);+#8099 = DIRECTION('',(1.,0.));+#8100 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8101 = ORIENTED_EDGE('',*,*,#8102,.T.);+#8102 = EDGE_CURVE('',#8080,#8103,#8105,.T.);+#8103 = VERTEX_POINT('',#8104);+#8104 = CARTESIAN_POINT('',(-0.918259928007,-0.102490442007,1.7000001));+#8105 = SURFACE_CURVE('',#8106,(#8110,#8117),.PCURVE_S1.);+#8106 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#8107,#8108,#8109),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#8107 = CARTESIAN_POINT('',(-0.888035632739,-0.105713411882,1.7000001));+#8108 = CARTESIAN_POINT('',(-0.90307615882,-0.105713411882,1.7000001));+#8109 = CARTESIAN_POINT('',(-0.918259928007,-0.102490442007,1.7000001));+#8110 = PCURVE('',#7812,#8111);+#8111 = DEFINITIONAL_REPRESENTATION('',(#8112),#8116);+#8112 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#8113,#8114,#8115),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#8113 = CARTESIAN_POINT('',(8.336748741905E-02,-4.154050060399E-03));+#8114 = CARTESIAN_POINT('',(6.832696133829E-02,-4.154050060399E-03));+#8115 = CARTESIAN_POINT('',(5.3143192152E-02,-9.310801859515E-04));+#8116 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8117 = PCURVE('',#7395,#8118);+#8118 = DEFINITIONAL_REPRESENTATION('',(#8119),#8123);+#8119 = LINE('',#8120,#8121);+#8120 = CARTESIAN_POINT('',(0.,-0.1));+#8121 = VECTOR('',#8122,1.);+#8122 = DIRECTION('',(1.,0.));+#8123 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8124 = ORIENTED_EDGE('',*,*,#8125,.T.);+#8125 = EDGE_CURVE('',#8103,#8126,#8128,.T.);+#8126 = VERTEX_POINT('',#8127);+#8127 = CARTESIAN_POINT('',(-0.948770709485,-9.282153238409E-02,+ 1.7000001));+#8128 = SURFACE_CURVE('',#8129,(#8133,#8140),.PCURVE_S1.);+#8129 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#8130,#8131,#8132),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#8130 = CARTESIAN_POINT('',(-0.918259928007,-0.102490442007,1.7000001));+#8131 = CARTESIAN_POINT('',(-0.933443697193,-9.926747213299E-02,+ 1.7000001));+#8132 = CARTESIAN_POINT('',(-0.948770709485,-9.282153238409E-02,+ 1.7000001));+#8133 = PCURVE('',#7812,#8134);+#8134 = DEFINITIONAL_REPRESENTATION('',(#8135),#8139);+#8135 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#8136,#8137,#8138),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#8136 = CARTESIAN_POINT('',(5.3143192152E-02,-9.310801859515E-04));+#8137 = CARTESIAN_POINT('',(3.795942296572E-02,2.291889688496E-03));+#8138 = CARTESIAN_POINT('',(2.26324106739E-02,8.737829437391E-03));+#8139 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8140 = PCURVE('',#7359,#8141);+#8141 = DEFINITIONAL_REPRESENTATION('',(#8142),#8146);+#8142 = LINE('',#8143,#8144);+#8143 = CARTESIAN_POINT('',(0.,-0.1));+#8144 = VECTOR('',#8145,1.);+#8145 = DIRECTION('',(1.,0.));+#8146 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8147 = ORIENTED_EDGE('',*,*,#8148,.T.);+#8148 = EDGE_CURVE('',#8126,#8149,#8151,.T.);+#8149 = VERTEX_POINT('',#8150);+#8150 = CARTESIAN_POINT('',(-0.948770709485,-6.202426469493E-02,+ 1.7000001));+#8151 = SURFACE_CURVE('',#8152,(#8156,#8163),.PCURVE_S1.);+#8152 = LINE('',#8153,#8154);+#8153 = CARTESIAN_POINT('',(-0.948770709485,-9.282153238409E-02,+ 1.7000001));+#8154 = VECTOR('',#8155,1.);+#8155 = DIRECTION('',(0.,1.,0.));+#8156 = PCURVE('',#7812,#8157);+#8157 = DEFINITIONAL_REPRESENTATION('',(#8158),#8162);+#8158 = LINE('',#8159,#8160);+#8159 = CARTESIAN_POINT('',(2.26324106739E-02,8.737829437391E-03));+#8160 = VECTOR('',#8161,1.);+#8161 = DIRECTION('',(0.,1.));+#8162 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8163 = PCURVE('',#7328,#8164);+#8164 = DEFINITIONAL_REPRESENTATION('',(#8165),#8169);+#8165 = LINE('',#8166,#8167);+#8166 = CARTESIAN_POINT('',(0.,-0.1));+#8167 = VECTOR('',#8168,1.);+#8168 = DIRECTION('',(1.,0.));+#8169 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8170 = ORIENTED_EDGE('',*,*,#8171,.T.);+#8171 = EDGE_CURVE('',#8149,#8172,#8174,.T.);+#8172 = VERTEX_POINT('',#8173);+#8173 = CARTESIAN_POINT('',(-0.917615334032,-7.735127698674E-02,+ 1.7000001));+#8174 = SURFACE_CURVE('',#8175,(#8179,#8186),.PCURVE_S1.);+#8175 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#8176,#8177,#8178),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#8176 = CARTESIAN_POINT('',(-0.948770709485,-6.202426469493E-02,+ 1.7000001));+#8177 = CARTESIAN_POINT('',(-0.932297752349,-7.248101139869E-02,+ 1.7000001));+#8178 = CARTESIAN_POINT('',(-0.917615334032,-7.735127698674E-02,+ 1.7000001));+#8179 = PCURVE('',#7812,#8180);+#8180 = DEFINITIONAL_REPRESENTATION('',(#8181),#8185);+#8181 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#8182,#8183,#8184),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#8182 = CARTESIAN_POINT('',(2.26324106739E-02,3.953509712656E-02));+#8183 = CARTESIAN_POINT('',(3.910536780996E-02,2.907835042279E-02));+#8184 = CARTESIAN_POINT('',(5.378778612689E-02,2.420808483474E-02));+#8185 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8186 = PCURVE('',#7296,#8187);+#8187 = DEFINITIONAL_REPRESENTATION('',(#8188),#8192);+#8188 = LINE('',#8189,#8190);+#8189 = CARTESIAN_POINT('',(0.,-0.1));+#8190 = VECTOR('',#8191,1.);+#8191 = DIRECTION('',(1.,0.));+#8192 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8193 = ORIENTED_EDGE('',*,*,#8194,.T.);+#8194 = EDGE_CURVE('',#8172,#8195,#8197,.T.);+#8195 = VERTEX_POINT('',#8196);+#8196 = CARTESIAN_POINT('',(-0.888035632739,-8.22215425748E-02,1.7000001+ ));+#8197 = SURFACE_CURVE('',#8198,(#8202,#8209),.PCURVE_S1.);+#8198 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#8199,#8200,#8201),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#8199 = CARTESIAN_POINT('',(-0.917615334032,-7.735127698674E-02,+ 1.7000001));+#8200 = CARTESIAN_POINT('',(-0.902932915715,-8.22215425748E-02,1.7000001+ ));+#8201 = CARTESIAN_POINT('',(-0.888035632739,-8.22215425748E-02,1.7000001+ ));+#8202 = PCURVE('',#7812,#8203);+#8203 = DEFINITIONAL_REPRESENTATION('',(#8204),#8208);+#8204 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#8205,#8206,#8207),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#8205 = CARTESIAN_POINT('',(5.378778612689E-02,2.420808483474E-02));+#8206 = CARTESIAN_POINT('',(6.847020444382E-02,1.933781924669E-02));+#8207 = CARTESIAN_POINT('',(8.336748741905E-02,1.933781924669E-02));+#8208 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8209 = PCURVE('',#7260,#8210);+#8210 = DEFINITIONAL_REPRESENTATION('',(#8211),#8215);+#8211 = LINE('',#8212,#8213);+#8212 = CARTESIAN_POINT('',(0.,-0.1));+#8213 = VECTOR('',#8214,1.);+#8214 = DIRECTION('',(1.,0.));+#8215 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8216 = ORIENTED_EDGE('',*,*,#8217,.T.);+#8217 = EDGE_CURVE('',#8195,#8218,#8220,.T.);+#8218 = VERTEX_POINT('',#8219);+#8219 = CARTESIAN_POINT('',(-0.853943773623,-7.240938984592E-02,+ 1.7000001));+#8220 = SURFACE_CURVE('',#8221,(#8225,#8232),.PCURVE_S1.);+#8221 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#8222,#8223,#8224),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#8222 = CARTESIAN_POINT('',(-0.888035632739,-8.22215425748E-02,1.7000001+ ));+#8223 = CARTESIAN_POINT('',(-0.866119437593,-8.22215425748E-02,1.7000001+ ));+#8224 = CARTESIAN_POINT('',(-0.853943773623,-7.240938984592E-02,+ 1.7000001));+#8225 = PCURVE('',#7812,#8226);+#8226 = DEFINITIONAL_REPRESENTATION('',(#8227),#8231);+#8227 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#8228,#8229,#8230),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#8228 = CARTESIAN_POINT('',(8.336748741905E-02,1.933781924669E-02));+#8229 = CARTESIAN_POINT('',(0.105283682565,1.933781924669E-02));+#8230 = CARTESIAN_POINT('',(0.117459346535,2.914997197556E-02));+#8231 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8232 = PCURVE('',#7224,#8233);+#8233 = DEFINITIONAL_REPRESENTATION('',(#8234),#8238);+#8234 = LINE('',#8235,#8236);+#8235 = CARTESIAN_POINT('',(0.,-0.1));+#8236 = VECTOR('',#8237,1.);+#8237 = DIRECTION('',(1.,0.));+#8238 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8239 = ORIENTED_EDGE('',*,*,#8240,.T.);+#8240 = EDGE_CURVE('',#8218,#8241,#8243,.T.);+#8241 = VERTEX_POINT('',#8242);+#8242 = CARTESIAN_POINT('',(-0.841768109653,-4.497833513674E-02,+ 1.7000001));+#8243 = SURFACE_CURVE('',#8244,(#8248,#8255),.PCURVE_S1.);+#8244 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#8245,#8246,#8247),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#8245 = CARTESIAN_POINT('',(-0.853943773623,-7.240938984592E-02,+ 1.7000001));+#8246 = CARTESIAN_POINT('',(-0.841768109653,-6.259723711705E-02,+ 1.7000001));+#8247 = CARTESIAN_POINT('',(-0.841768109653,-4.497833513674E-02,+ 1.7000001));+#8248 = PCURVE('',#7812,#8249);+#8249 = DEFINITIONAL_REPRESENTATION('',(#8250),#8254);+#8250 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#8251,#8252,#8253),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#8251 = CARTESIAN_POINT('',(0.117459346535,2.914997197556E-02));+#8252 = CARTESIAN_POINT('',(0.129635010506,3.896212470443E-02));+#8253 = CARTESIAN_POINT('',(0.129635010506,5.658102668475E-02));+#8254 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8255 = PCURVE('',#7185,#8256);+#8256 = DEFINITIONAL_REPRESENTATION('',(#8257),#8261);+#8257 = LINE('',#8258,#8259);+#8258 = CARTESIAN_POINT('',(0.,-0.1));+#8259 = VECTOR('',#8260,1.);+#8260 = DIRECTION('',(1.,0.));+#8261 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8262 = ORIENTED_EDGE('',*,*,#8263,.T.);+#8263 = EDGE_CURVE('',#8241,#8264,#8266,.T.);+#8264 = VERTEX_POINT('',#8265);+#8265 = CARTESIAN_POINT('',(-0.850147831327,-2.048376409093E-02,+ 1.7000001));+#8266 = SURFACE_CURVE('',#8267,(#8271,#8278),.PCURVE_S1.);+#8267 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#8268,#8269,#8270),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#8268 = CARTESIAN_POINT('',(-0.841768109653,-4.497833513674E-02,+ 1.7000001));+#8269 = CARTESIAN_POINT('',(-0.841768109653,-2.893510731726E-02,+ 1.7000001));+#8270 = CARTESIAN_POINT('',(-0.850147831327,-2.048376409093E-02,+ 1.7000001));+#8271 = PCURVE('',#7812,#8272);+#8272 = DEFINITIONAL_REPRESENTATION('',(#8273),#8277);+#8273 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#8274,#8275,#8276),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#8274 = CARTESIAN_POINT('',(0.129635010506,5.658102668475E-02));+#8275 = CARTESIAN_POINT('',(0.129635010506,7.262425450422E-02));+#8276 = CARTESIAN_POINT('',(0.121255288832,8.107559773055E-02));+#8277 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8278 = PCURVE('',#7143,#8279);+#8279 = DEFINITIONAL_REPRESENTATION('',(#8280),#8284);+#8280 = LINE('',#8281,#8282);+#8281 = CARTESIAN_POINT('',(0.,-0.1));+#8282 = VECTOR('',#8283,1.);+#8283 = DIRECTION('',(1.,0.));+#8284 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8285 = ORIENTED_EDGE('',*,*,#8286,.T.);+#8286 = EDGE_CURVE('',#8264,#8287,#8289,.T.);+#8287 = VERTEX_POINT('',#8288);+#8288 = CARTESIAN_POINT('',(-0.879297803302,-7.448641487612E-03,+ 1.7000001));+#8289 = SURFACE_CURVE('',#8290,(#8294,#8301),.PCURVE_S1.);+#8290 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#8291,#8292,#8293),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#8291 = CARTESIAN_POINT('',(-0.850147831327,-2.048376409093E-02,+ 1.7000001));+#8292 = CARTESIAN_POINT('',(-0.858527553,-1.20324208646E-02,1.7000001));+#8293 = CARTESIAN_POINT('',(-0.879297803302,-7.448641487612E-03,+ 1.7000001));+#8294 = PCURVE('',#7812,#8295);+#8295 = DEFINITIONAL_REPRESENTATION('',(#8296),#8300);+#8296 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#8297,#8298,#8299),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#8297 = CARTESIAN_POINT('',(0.121255288832,8.107559773055E-02));+#8298 = CARTESIAN_POINT('',(0.112875567158,8.952694095688E-02));+#8299 = CARTESIAN_POINT('',(9.210531685644E-02,9.411072033387E-02));+#8300 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8301 = PCURVE('',#7107,#8302);+#8302 = DEFINITIONAL_REPRESENTATION('',(#8303),#8307);+#8303 = LINE('',#8304,#8305);+#8304 = CARTESIAN_POINT('',(0.,-0.1));+#8305 = VECTOR('',#8306,1.);+#8306 = DIRECTION('',(1.,0.));+#8307 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8308 = ORIENTED_EDGE('',*,*,#8309,.T.);+#8309 = EDGE_CURVE('',#8287,#8310,#8312,.T.);+#8310 = VERTEX_POINT('',#8311);+#8311 = CARTESIAN_POINT('',(-0.894768058699,-3.867563849337E-03,+ 1.7000001));+#8312 = SURFACE_CURVE('',#8313,(#8317,#8324),.PCURVE_S1.);+#8313 = LINE('',#8314,#8315);+#8314 = CARTESIAN_POINT('',(-0.879297803302,-7.448641487612E-03,+ 1.7000001));+#8315 = VECTOR('',#8316,1.);+#8316 = DIRECTION('',(-0.97423893818,0.225518272727,0.));+#8317 = PCURVE('',#7812,#8318);+#8318 = DEFINITIONAL_REPRESENTATION('',(#8319),#8323);+#8319 = LINE('',#8320,#8321);+#8320 = CARTESIAN_POINT('',(9.210531685644E-02,9.411072033387E-02));+#8321 = VECTOR('',#8322,1.);+#8322 = DIRECTION('',(-0.97423893818,0.225518272727));+#8323 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8324 = PCURVE('',#7076,#8325);+#8325 = DEFINITIONAL_REPRESENTATION('',(#8326),#8330);+#8326 = LINE('',#8327,#8328);+#8327 = CARTESIAN_POINT('',(0.,-0.1));+#8328 = VECTOR('',#8329,1.);+#8329 = DIRECTION('',(1.,0.));+#8330 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8331 = ORIENTED_EDGE('',*,*,#8332,.T.);+#8332 = EDGE_CURVE('',#8310,#8333,#8335,.T.);+#8333 = VERTEX_POINT('',#8334);+#8334 = CARTESIAN_POINT('',(-0.93802747657,1.647295713607E-02,1.7000001)+ );+#8335 = SURFACE_CURVE('',#8336,(#8340,#8347),.PCURVE_S1.);+#8336 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#8337,#8338,#8339),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#8337 = CARTESIAN_POINT('',(-0.894768058699,-3.867563849337E-03,+ 1.7000001));+#8338 = CARTESIAN_POINT('',(-0.92456262465,2.86486211062E-03,1.7000001)+ );+#8339 = CARTESIAN_POINT('',(-0.93802747657,1.647295713607E-02,1.7000001)+ );+#8340 = PCURVE('',#7812,#8341);+#8341 = DEFINITIONAL_REPRESENTATION('',(#8342),#8346);+#8342 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#8343,#8344,#8345),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#8343 = CARTESIAN_POINT('',(7.663506145909E-02,9.769179797215E-02));+#8344 = CARTESIAN_POINT('',(4.684049550864E-02,0.104424223932));+#8345 = CARTESIAN_POINT('',(3.337564358872E-02,0.118032318958));+#8346 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8347 = PCURVE('',#7044,#8348);+#8348 = DEFINITIONAL_REPRESENTATION('',(#8349),#8353);+#8349 = LINE('',#8350,#8351);+#8350 = CARTESIAN_POINT('',(0.,-0.1));+#8351 = VECTOR('',#8352,1.);+#8352 = DIRECTION('',(1.,0.));+#8353 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8354 = ORIENTED_EDGE('',*,*,#8355,.T.);+#8355 = EDGE_CURVE('',#8333,#8356,#8358,.T.);+#8356 = VERTEX_POINT('',#8357);+#8357 = CARTESIAN_POINT('',(-0.95149232849,5.299994904647E-02,1.7000001)+ );+#8358 = SURFACE_CURVE('',#8359,(#8363,#8370),.PCURVE_S1.);+#8359 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#8360,#8361,#8362),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#8360 = CARTESIAN_POINT('',(-0.93802747657,1.647295713607E-02,1.7000001)+ );+#8361 = CARTESIAN_POINT('',(-0.95149232849,3.008105216151E-02,1.7000001)+ );+#8362 = CARTESIAN_POINT('',(-0.95149232849,5.299994904647E-02,1.7000001)+ );+#8363 = PCURVE('',#7812,#8364);+#8364 = DEFINITIONAL_REPRESENTATION('',(#8365),#8369);+#8365 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#8366,#8367,#8368),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#8366 = CARTESIAN_POINT('',(3.337564358872E-02,0.118032318958));+#8367 = CARTESIAN_POINT('',(1.991079166881E-02,0.131640413983));+#8368 = CARTESIAN_POINT('',(1.991079166881E-02,0.154559310868));+#8369 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8370 = PCURVE('',#7008,#8371);+#8371 = DEFINITIONAL_REPRESENTATION('',(#8372),#8376);+#8372 = LINE('',#8373,#8374);+#8373 = CARTESIAN_POINT('',(0.,-0.1));+#8374 = VECTOR('',#8375,1.);+#8375 = DIRECTION('',(1.,0.));+#8376 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8377 = ORIENTED_EDGE('',*,*,#8378,.T.);+#8378 = EDGE_CURVE('',#8356,#8379,#8381,.T.);+#8379 = VERTEX_POINT('',#8380);+#8380 = CARTESIAN_POINT('',(-0.932226130796,9.890936436916E-02,1.7000001+ ));+#8381 = SURFACE_CURVE('',#8382,(#8386,#8393),.PCURVE_S1.);+#8382 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#8383,#8384,#8385),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#8383 = CARTESIAN_POINT('',(-0.95149232849,5.299994904647E-02,1.7000001)+ );+#8384 = CARTESIAN_POINT('',(-0.95149232849,8.164857015267E-02,1.7000001)+ );+#8385 = CARTESIAN_POINT('',(-0.932226130796,9.890936436916E-02,1.7000001+ ));+#8386 = PCURVE('',#7812,#8387);+#8387 = DEFINITIONAL_REPRESENTATION('',(#8388),#8392);+#8388 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#8389,#8390,#8391),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#8389 = CARTESIAN_POINT('',(1.991079166881E-02,0.154559310868));+#8390 = CARTESIAN_POINT('',(1.991079166881E-02,0.183207931974));+#8391 = CARTESIAN_POINT('',(3.917698936273E-02,0.200468726191));+#8392 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8393 = PCURVE('',#6969,#8394);+#8394 = DEFINITIONAL_REPRESENTATION('',(#8395),#8399);+#8395 = LINE('',#8396,#8397);+#8396 = CARTESIAN_POINT('',(0.,-0.1));+#8397 = VECTOR('',#8398,1.);+#8398 = DIRECTION('',(1.,0.));+#8399 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8400 = ORIENTED_EDGE('',*,*,#8401,.T.);+#8401 = EDGE_CURVE('',#8379,#8402,#8404,.T.);+#8402 = VERTEX_POINT('',#8403);+#8403 = CARTESIAN_POINT('',(-0.881016720568,0.116170158586,1.7000001));+#8404 = SURFACE_CURVE('',#8405,(#8409,#8416),.PCURVE_S1.);+#8405 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#8406,#8407,#8408),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#8406 = CARTESIAN_POINT('',(-0.932226130796,9.890936436916E-02,1.7000001+ ));+#8407 = CARTESIAN_POINT('',(-0.912959933102,0.116170158586,1.7000001));+#8408 = CARTESIAN_POINT('',(-0.881016720568,0.116170158586,1.7000001));+#8409 = PCURVE('',#7812,#8410);+#8410 = DEFINITIONAL_REPRESENTATION('',(#8411),#8415);+#8411 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#8412,#8413,#8414),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#8412 = CARTESIAN_POINT('',(3.917698936273E-02,0.200468726191));+#8413 = CARTESIAN_POINT('',(5.844318705665E-02,0.217729520407));+#8414 = CARTESIAN_POINT('',(9.038639959006E-02,0.217729520407));+#8415 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8416 = PCURVE('',#6927,#8417);+#8417 = DEFINITIONAL_REPRESENTATION('',(#8418),#8422);+#8418 = LINE('',#8419,#8420);+#8419 = CARTESIAN_POINT('',(0.,-0.1));+#8420 = VECTOR('',#8421,1.);+#8421 = DIRECTION('',(1.,0.));+#8422 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8423 = ORIENTED_EDGE('',*,*,#8424,.T.);+#8424 = EDGE_CURVE('',#8402,#8425,#8427,.T.);+#8425 = VERTEX_POINT('',#8426);+#8426 = CARTESIAN_POINT('',(-0.855089718467,0.113376918028,1.7000001));+#8427 = SURFACE_CURVE('',#8428,(#8432,#8439),.PCURVE_S1.);+#8428 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#8429,#8430,#8431),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#8429 = CARTESIAN_POINT('',(-0.881016720568,0.116170158586,1.7000001));+#8430 = CARTESIAN_POINT('',(-0.868697813493,0.116170158586,1.7000001));+#8431 = CARTESIAN_POINT('',(-0.855089718467,0.113376918028,1.7000001));+#8432 = PCURVE('',#7812,#8433);+#8433 = DEFINITIONAL_REPRESENTATION('',(#8434),#8438);+#8434 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#8435,#8436,#8437),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#8435 = CARTESIAN_POINT('',(9.038639959006E-02,0.217729520407));+#8436 = CARTESIAN_POINT('',(0.102705306666,0.217729520407));+#8437 = CARTESIAN_POINT('',(0.116313401691,0.214936279849));+#8438 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8439 = PCURVE('',#6891,#8440);+#8440 = DEFINITIONAL_REPRESENTATION('',(#8441),#8445);+#8441 = LINE('',#8442,#8443);+#8442 = CARTESIAN_POINT('',(0.,-0.1));+#8443 = VECTOR('',#8444,1.);+#8444 = DIRECTION('',(1.,0.));+#8445 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8446 = ORIENTED_EDGE('',*,*,#8447,.T.);+#8447 = EDGE_CURVE('',#8425,#7849,#8448,.T.);+#8448 = SURFACE_CURVE('',#8449,(#8453,#8460),.PCURVE_S1.);+#8449 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#8450,#8451,#8452),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#8450 = CARTESIAN_POINT('',(-0.855089718467,0.113376918028,1.7000001));+#8451 = CARTESIAN_POINT('',(-0.841481623442,0.11058367747,1.7000001));+#8452 = CARTESIAN_POINT('',(-0.826441097361,0.104997196354,1.7000001));+#8453 = PCURVE('',#7812,#8454);+#8454 = DEFINITIONAL_REPRESENTATION('',(#8455),#8459);+#8455 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#8456,#8457,#8458),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#8456 = CARTESIAN_POINT('',(0.116313401691,0.214936279849));+#8457 = CARTESIAN_POINT('',(0.129921496717,0.212143039291));+#8458 = CARTESIAN_POINT('',(0.144962022797,0.206556558176));+#8459 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8460 = PCURVE('',#6855,#8461);+#8461 = DEFINITIONAL_REPRESENTATION('',(#8462),#8466);+#8462 = LINE('',#8463,#8464);+#8463 = CARTESIAN_POINT('',(0.,-0.1));+#8464 = VECTOR('',#8465,1.);+#8465 = DIRECTION('',(1.,0.));+#8466 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8467 = ADVANCED_FACE('',(#8468),#7719,.T.);+#8468 = FACE_BOUND('',#8469,.T.);+#8469 = EDGE_LOOP('',(#8470,#8471,#8472,#8473));+#8470 = ORIENTED_EDGE('',*,*,#7699,.T.);+#8471 = ORIENTED_EDGE('',*,*,#7824,.T.);+#8472 = ORIENTED_EDGE('',*,*,#7895,.T.);+#8473 = ORIENTED_EDGE('',*,*,#8474,.F.);+#8474 = EDGE_CURVE('',#7664,#7896,#8475,.T.);+#8475 = SURFACE_CURVE('',#8476,(#8480,#8487),.PCURVE_S1.);+#8476 = LINE('',#8477,#8478);+#8477 = CARTESIAN_POINT('',(-0.911957231363,8.315262276075E-02,1.8000001+ ));+#8478 = VECTOR('',#8479,1.);+#8479 = DIRECTION('',(-0.,-0.,-1.));+#8480 = PCURVE('',#7719,#8481);+#8481 = DEFINITIONAL_REPRESENTATION('',(#8482),#8486);+#8482 = LINE('',#8483,#8484);+#8483 = CARTESIAN_POINT('',(1.,0.));+#8484 = VECTOR('',#8485,1.);+#8485 = DIRECTION('',(0.,-1.));+#8486 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8487 = PCURVE('',#7683,#8488);+#8488 = DEFINITIONAL_REPRESENTATION('',(#8489),#8493);+#8489 = LINE('',#8490,#8491);+#8490 = CARTESIAN_POINT('',(0.,0.));+#8491 = VECTOR('',#8492,1.);+#8492 = DIRECTION('',(0.,-1.));+#8493 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8494 = ADVANCED_FACE('',(#8495),#7683,.T.);+#8495 = FACE_BOUND('',#8496,.T.);+#8496 = EDGE_LOOP('',(#8497,#8498,#8499,#8500));+#8497 = ORIENTED_EDGE('',*,*,#7663,.T.);+#8498 = ORIENTED_EDGE('',*,*,#8474,.T.);+#8499 = ORIENTED_EDGE('',*,*,#7918,.T.);+#8500 = ORIENTED_EDGE('',*,*,#8501,.F.);+#8501 = EDGE_CURVE('',#7628,#7919,#8502,.T.);+#8502 = SURFACE_CURVE('',#8503,(#8507,#8514),.PCURVE_S1.);+#8503 = LINE('',#8504,#8505);+#8504 = CARTESIAN_POINT('',(-0.923846409122,5.744048531793E-02,1.8000001+ ));+#8505 = VECTOR('',#8506,1.);+#8506 = DIRECTION('',(-0.,-0.,-1.));+#8507 = PCURVE('',#7683,#8508);+#8508 = DEFINITIONAL_REPRESENTATION('',(#8509),#8513);+#8509 = LINE('',#8510,#8511);+#8510 = CARTESIAN_POINT('',(1.,0.));+#8511 = VECTOR('',#8512,1.);+#8512 = DIRECTION('',(0.,-1.));+#8513 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8514 = PCURVE('',#7647,#8515);+#8515 = DEFINITIONAL_REPRESENTATION('',(#8516),#8520);+#8516 = LINE('',#8517,#8518);+#8517 = CARTESIAN_POINT('',(0.,0.));+#8518 = VECTOR('',#8519,1.);+#8519 = DIRECTION('',(0.,-1.));+#8520 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8521 = ADVANCED_FACE('',(#8522),#7647,.T.);+#8522 = FACE_BOUND('',#8523,.T.);+#8523 = EDGE_LOOP('',(#8524,#8525,#8526,#8527));+#8524 = ORIENTED_EDGE('',*,*,#7627,.T.);+#8525 = ORIENTED_EDGE('',*,*,#8501,.T.);+#8526 = ORIENTED_EDGE('',*,*,#7941,.T.);+#8527 = ORIENTED_EDGE('',*,*,#8528,.F.);+#8528 = EDGE_CURVE('',#7592,#7942,#8529,.T.);+#8529 = SURFACE_CURVE('',#8530,(#8534,#8541),.PCURVE_S1.);+#8530 = LINE('',#8531,#8532);+#8531 = CARTESIAN_POINT('',(-0.916039659871,3.581077638275E-02,1.8000001+ ));+#8532 = VECTOR('',#8533,1.);+#8533 = DIRECTION('',(-0.,-0.,-1.));+#8534 = PCURVE('',#7647,#8535);+#8535 = DEFINITIONAL_REPRESENTATION('',(#8536),#8540);+#8536 = LINE('',#8537,#8538);+#8537 = CARTESIAN_POINT('',(1.,0.));+#8538 = VECTOR('',#8539,1.);+#8539 = DIRECTION('',(0.,-1.));+#8540 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8541 = PCURVE('',#7611,#8542);+#8542 = DEFINITIONAL_REPRESENTATION('',(#8543),#8547);+#8543 = LINE('',#8544,#8545);+#8544 = CARTESIAN_POINT('',(0.,0.));+#8545 = VECTOR('',#8546,1.);+#8546 = DIRECTION('',(0.,-1.));+#8547 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8548 = ADVANCED_FACE('',(#8549),#7611,.T.);+#8549 = FACE_BOUND('',#8550,.T.);+#8550 = EDGE_LOOP('',(#8551,#8552,#8553,#8554));+#8551 = ORIENTED_EDGE('',*,*,#7591,.T.);+#8552 = ORIENTED_EDGE('',*,*,#8528,.T.);+#8553 = ORIENTED_EDGE('',*,*,#7964,.T.);+#8554 = ORIENTED_EDGE('',*,*,#8555,.F.);+#8555 = EDGE_CURVE('',#7565,#7965,#8556,.T.);+#8556 = SURFACE_CURVE('',#8557,(#8561,#8568),.PCURVE_S1.);+#8557 = LINE('',#8558,#8559);+#8558 = CARTESIAN_POINT('',(-0.886889687895,2.334862620155E-02,1.8000001+ ));+#8559 = VECTOR('',#8560,1.);+#8560 = DIRECTION('',(-0.,-0.,-1.));+#8561 = PCURVE('',#7611,#8562);+#8562 = DEFINITIONAL_REPRESENTATION('',(#8563),#8567);+#8563 = LINE('',#8564,#8565);+#8564 = CARTESIAN_POINT('',(1.,0.));+#8565 = VECTOR('',#8566,1.);+#8566 = DIRECTION('',(0.,-1.));+#8567 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8568 = PCURVE('',#7580,#8569);+#8569 = DEFINITIONAL_REPRESENTATION('',(#8570),#8574);+#8570 = LINE('',#8571,#8572);+#8571 = CARTESIAN_POINT('',(0.,0.));+#8572 = VECTOR('',#8573,1.);+#8573 = DIRECTION('',(0.,-1.));+#8574 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8575 = ADVANCED_FACE('',(#8576),#7580,.T.);+#8576 = FACE_BOUND('',#8577,.T.);+#8577 = EDGE_LOOP('',(#8578,#8579,#8580,#8581));+#8578 = ORIENTED_EDGE('',*,*,#7564,.T.);+#8579 = ORIENTED_EDGE('',*,*,#8555,.T.);+#8580 = ORIENTED_EDGE('',*,*,#7987,.T.);+#8581 = ORIENTED_EDGE('',*,*,#8582,.F.);+#8582 = EDGE_CURVE('',#7529,#7988,#8583,.T.);+#8583 = SURFACE_CURVE('',#8584,(#8588,#8595),.PCURVE_S1.);+#8584 = LINE('',#8585,#8586);+#8585 = CARTESIAN_POINT('',(-0.871705918709,1.991079166881E-02,1.8000001+ ));+#8586 = VECTOR('',#8587,1.);+#8587 = DIRECTION('',(-0.,-0.,-1.));+#8588 = PCURVE('',#7580,#8589);+#8589 = DEFINITIONAL_REPRESENTATION('',(#8590),#8594);+#8590 = LINE('',#8591,#8592);+#8591 = CARTESIAN_POINT('',(1.556809407015E-02,0.));+#8592 = VECTOR('',#8593,1.);+#8593 = DIRECTION('',(0.,-1.));+#8594 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8595 = PCURVE('',#7548,#8596);+#8596 = DEFINITIONAL_REPRESENTATION('',(#8597),#8601);+#8597 = LINE('',#8598,#8599);+#8598 = CARTESIAN_POINT('',(0.,0.));+#8599 = VECTOR('',#8600,1.);+#8600 = DIRECTION('',(0.,-1.));+#8601 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8602 = ADVANCED_FACE('',(#8603),#7548,.T.);+#8603 = FACE_BOUND('',#8604,.T.);+#8604 = EDGE_LOOP('',(#8605,#8606,#8607,#8608));+#8605 = ORIENTED_EDGE('',*,*,#7528,.T.);+#8606 = ORIENTED_EDGE('',*,*,#8582,.T.);+#8607 = ORIENTED_EDGE('',*,*,#8010,.T.);+#8608 = ORIENTED_EDGE('',*,*,#8609,.F.);+#8609 = EDGE_CURVE('',#7493,#8011,#8610,.T.);+#8610 = SURFACE_CURVE('',#8611,(#8615,#8622),.PCURVE_S1.);+#8611 = LINE('',#8612,#8613);+#8612 = CARTESIAN_POINT('',(-0.827873528416,-2.148646582965E-03,+ 1.8000001));+#8613 = VECTOR('',#8614,1.);+#8614 = DIRECTION('',(-0.,-0.,-1.));+#8615 = PCURVE('',#7548,#8616);+#8616 = DEFINITIONAL_REPRESENTATION('',(#8617),#8621);+#8617 = LINE('',#8618,#8619);+#8618 = CARTESIAN_POINT('',(1.,0.));+#8619 = VECTOR('',#8620,1.);+#8620 = DIRECTION('',(0.,-1.));+#8621 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8622 = PCURVE('',#7512,#8623);+#8623 = DEFINITIONAL_REPRESENTATION('',(#8624),#8628);+#8624 = LINE('',#8625,#8626);+#8625 = CARTESIAN_POINT('',(0.,0.));+#8626 = VECTOR('',#8627,1.);+#8627 = DIRECTION('',(0.,-1.));+#8628 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8629 = ADVANCED_FACE('',(#8630),#7512,.T.);+#8630 = FACE_BOUND('',#8631,.T.);+#8631 = EDGE_LOOP('',(#8632,#8633,#8634,#8635));+#8632 = ORIENTED_EDGE('',*,*,#7492,.T.);+#8633 = ORIENTED_EDGE('',*,*,#8609,.T.);+#8634 = ORIENTED_EDGE('',*,*,#8033,.T.);+#8635 = ORIENTED_EDGE('',*,*,#8636,.F.);+#8636 = EDGE_CURVE('',#7448,#8034,#8637,.T.);+#8637 = SURFACE_CURVE('',#8638,(#8642,#8649),.PCURVE_S1.);+#8638 = LINE('',#8639,#8640);+#8639 = CARTESIAN_POINT('',(-0.814122190285,-4.311617476483E-02,+ 1.8000001));+#8640 = VECTOR('',#8641,1.);+#8641 = DIRECTION('',(-0.,-0.,-1.));+#8642 = PCURVE('',#7512,#8643);+#8643 = DEFINITIONAL_REPRESENTATION('',(#8644),#8648);+#8644 = LINE('',#8645,#8646);+#8645 = CARTESIAN_POINT('',(1.,0.));+#8646 = VECTOR('',#8647,1.);+#8647 = DIRECTION('',(0.,-1.));+#8648 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8649 = PCURVE('',#7473,#8650);+#8650 = DEFINITIONAL_REPRESENTATION('',(#8651),#8655);+#8651 = LINE('',#8652,#8653);+#8652 = CARTESIAN_POINT('',(0.,0.));+#8653 = VECTOR('',#8654,1.);+#8654 = DIRECTION('',(0.,-1.));+#8655 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8656 = ADVANCED_FACE('',(#8657),#7473,.T.);+#8657 = FACE_BOUND('',#8658,.T.);+#8658 = EDGE_LOOP('',(#8659,#8660,#8661,#8662));+#8659 = ORIENTED_EDGE('',*,*,#7447,.T.);+#8660 = ORIENTED_EDGE('',*,*,#8636,.T.);+#8661 = ORIENTED_EDGE('',*,*,#8056,.T.);+#8662 = ORIENTED_EDGE('',*,*,#8663,.F.);+#8663 = EDGE_CURVE('',#7412,#8057,#8664,.T.);+#8664 = SURFACE_CURVE('',#8665,(#8669,#8676),.PCURVE_S1.);+#8665 = LINE('',#8666,#8667);+#8666 = CARTESIAN_POINT('',(-0.833030280216,-8.967018406241E-02,+ 1.8000001));+#8667 = VECTOR('',#8668,1.);+#8668 = DIRECTION('',(-0.,-0.,-1.));+#8669 = PCURVE('',#7473,#8670);+#8670 = DEFINITIONAL_REPRESENTATION('',(#8671),#8675);+#8671 = LINE('',#8672,#8673);+#8672 = CARTESIAN_POINT('',(1.,0.));+#8673 = VECTOR('',#8674,1.);+#8674 = DIRECTION('',(0.,-1.));+#8675 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8676 = PCURVE('',#7431,#8677);+#8677 = DEFINITIONAL_REPRESENTATION('',(#8678),#8682);+#8678 = LINE('',#8679,#8680);+#8679 = CARTESIAN_POINT('',(0.,0.));+#8680 = VECTOR('',#8681,1.);+#8681 = DIRECTION('',(0.,-1.));+#8682 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8683 = ADVANCED_FACE('',(#8684),#7431,.T.);+#8684 = FACE_BOUND('',#8685,.T.);+#8685 = EDGE_LOOP('',(#8686,#8687,#8688,#8689));+#8686 = ORIENTED_EDGE('',*,*,#7411,.T.);+#8687 = ORIENTED_EDGE('',*,*,#8663,.T.);+#8688 = ORIENTED_EDGE('',*,*,#8079,.T.);+#8689 = ORIENTED_EDGE('',*,*,#8690,.F.);+#8690 = EDGE_CURVE('',#7376,#8080,#8691,.T.);+#8691 = SURFACE_CURVE('',#8692,(#8696,#8703),.PCURVE_S1.);+#8692 = LINE('',#8693,#8694);+#8693 = CARTESIAN_POINT('',(-0.888035632739,-0.105713411882,1.8000001));+#8694 = VECTOR('',#8695,1.);+#8695 = DIRECTION('',(-0.,-0.,-1.));+#8696 = PCURVE('',#7431,#8697);+#8697 = DEFINITIONAL_REPRESENTATION('',(#8698),#8702);+#8698 = LINE('',#8699,#8700);+#8699 = CARTESIAN_POINT('',(1.,0.));+#8700 = VECTOR('',#8701,1.);+#8701 = DIRECTION('',(0.,-1.));+#8702 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8703 = PCURVE('',#7395,#8704);+#8704 = DEFINITIONAL_REPRESENTATION('',(#8705),#8709);+#8705 = LINE('',#8706,#8707);+#8706 = CARTESIAN_POINT('',(0.,0.));+#8707 = VECTOR('',#8708,1.);+#8708 = DIRECTION('',(0.,-1.));+#8709 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8710 = ADVANCED_FACE('',(#8711),#7395,.T.);+#8711 = FACE_BOUND('',#8712,.T.);+#8712 = EDGE_LOOP('',(#8713,#8714,#8715,#8716));+#8713 = ORIENTED_EDGE('',*,*,#7375,.T.);+#8714 = ORIENTED_EDGE('',*,*,#8690,.T.);+#8715 = ORIENTED_EDGE('',*,*,#8102,.T.);+#8716 = ORIENTED_EDGE('',*,*,#8717,.F.);+#8717 = EDGE_CURVE('',#7340,#8103,#8718,.T.);+#8718 = SURFACE_CURVE('',#8719,(#8723,#8730),.PCURVE_S1.);+#8719 = LINE('',#8720,#8721);+#8720 = CARTESIAN_POINT('',(-0.918259928007,-0.102490442007,1.8000001));+#8721 = VECTOR('',#8722,1.);+#8722 = DIRECTION('',(-0.,-0.,-1.));+#8723 = PCURVE('',#7395,#8724);+#8724 = DEFINITIONAL_REPRESENTATION('',(#8725),#8729);+#8725 = LINE('',#8726,#8727);+#8726 = CARTESIAN_POINT('',(1.,0.));+#8727 = VECTOR('',#8728,1.);+#8728 = DIRECTION('',(0.,-1.));+#8729 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8730 = PCURVE('',#7359,#8731);+#8731 = DEFINITIONAL_REPRESENTATION('',(#8732),#8736);+#8732 = LINE('',#8733,#8734);+#8733 = CARTESIAN_POINT('',(0.,0.));+#8734 = VECTOR('',#8735,1.);+#8735 = DIRECTION('',(0.,-1.));+#8736 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8737 = ADVANCED_FACE('',(#8738),#7359,.T.);+#8738 = FACE_BOUND('',#8739,.T.);+#8739 = EDGE_LOOP('',(#8740,#8741,#8742,#8743));+#8740 = ORIENTED_EDGE('',*,*,#7339,.T.);+#8741 = ORIENTED_EDGE('',*,*,#8717,.T.);+#8742 = ORIENTED_EDGE('',*,*,#8125,.T.);+#8743 = ORIENTED_EDGE('',*,*,#8744,.F.);+#8744 = EDGE_CURVE('',#7313,#8126,#8745,.T.);+#8745 = SURFACE_CURVE('',#8746,(#8750,#8757),.PCURVE_S1.);+#8746 = LINE('',#8747,#8748);+#8747 = CARTESIAN_POINT('',(-0.948770709485,-9.282153238409E-02,+ 1.8000001));+#8748 = VECTOR('',#8749,1.);+#8749 = DIRECTION('',(-0.,-0.,-1.));+#8750 = PCURVE('',#7359,#8751);+#8751 = DEFINITIONAL_REPRESENTATION('',(#8752),#8756);+#8752 = LINE('',#8753,#8754);+#8753 = CARTESIAN_POINT('',(1.,0.));+#8754 = VECTOR('',#8755,1.);+#8755 = DIRECTION('',(0.,-1.));+#8756 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8757 = PCURVE('',#7328,#8758);+#8758 = DEFINITIONAL_REPRESENTATION('',(#8759),#8763);+#8759 = LINE('',#8760,#8761);+#8760 = CARTESIAN_POINT('',(0.,0.));+#8761 = VECTOR('',#8762,1.);+#8762 = DIRECTION('',(0.,-1.));+#8763 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8764 = ADVANCED_FACE('',(#8765),#7328,.T.);+#8765 = FACE_BOUND('',#8766,.T.);+#8766 = EDGE_LOOP('',(#8767,#8768,#8769,#8770));+#8767 = ORIENTED_EDGE('',*,*,#7312,.T.);+#8768 = ORIENTED_EDGE('',*,*,#8744,.T.);+#8769 = ORIENTED_EDGE('',*,*,#8148,.T.);+#8770 = ORIENTED_EDGE('',*,*,#8771,.F.);+#8771 = EDGE_CURVE('',#7277,#8149,#8772,.T.);+#8772 = SURFACE_CURVE('',#8773,(#8777,#8784),.PCURVE_S1.);+#8773 = LINE('',#8774,#8775);+#8774 = CARTESIAN_POINT('',(-0.948770709485,-6.202426469493E-02,+ 1.8000001));+#8775 = VECTOR('',#8776,1.);+#8776 = DIRECTION('',(-0.,-0.,-1.));+#8777 = PCURVE('',#7328,#8778);+#8778 = DEFINITIONAL_REPRESENTATION('',(#8779),#8783);+#8779 = LINE('',#8780,#8781);+#8780 = CARTESIAN_POINT('',(3.079726768917E-02,0.));+#8781 = VECTOR('',#8782,1.);+#8782 = DIRECTION('',(0.,-1.));+#8783 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8784 = PCURVE('',#7296,#8785);+#8785 = DEFINITIONAL_REPRESENTATION('',(#8786),#8790);+#8786 = LINE('',#8787,#8788);+#8787 = CARTESIAN_POINT('',(0.,0.));+#8788 = VECTOR('',#8789,1.);+#8789 = DIRECTION('',(0.,-1.));+#8790 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8791 = ADVANCED_FACE('',(#8792),#7296,.T.);+#8792 = FACE_BOUND('',#8793,.T.);+#8793 = EDGE_LOOP('',(#8794,#8795,#8796,#8797));+#8794 = ORIENTED_EDGE('',*,*,#7276,.T.);+#8795 = ORIENTED_EDGE('',*,*,#8771,.T.);+#8796 = ORIENTED_EDGE('',*,*,#8171,.T.);+#8797 = ORIENTED_EDGE('',*,*,#8798,.F.);+#8798 = EDGE_CURVE('',#7241,#8172,#8799,.T.);+#8799 = SURFACE_CURVE('',#8800,(#8804,#8811),.PCURVE_S1.);+#8800 = LINE('',#8801,#8802);+#8801 = CARTESIAN_POINT('',(-0.917615334032,-7.735127698674E-02,+ 1.8000001));+#8802 = VECTOR('',#8803,1.);+#8803 = DIRECTION('',(-0.,-0.,-1.));+#8804 = PCURVE('',#7296,#8805);+#8805 = DEFINITIONAL_REPRESENTATION('',(#8806),#8810);+#8806 = LINE('',#8807,#8808);+#8807 = CARTESIAN_POINT('',(1.,0.));+#8808 = VECTOR('',#8809,1.);+#8809 = DIRECTION('',(0.,-1.));+#8810 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8811 = PCURVE('',#7260,#8812);+#8812 = DEFINITIONAL_REPRESENTATION('',(#8813),#8817);+#8813 = LINE('',#8814,#8815);+#8814 = CARTESIAN_POINT('',(0.,0.));+#8815 = VECTOR('',#8816,1.);+#8816 = DIRECTION('',(0.,-1.));+#8817 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8818 = ADVANCED_FACE('',(#8819),#7260,.T.);+#8819 = FACE_BOUND('',#8820,.T.);+#8820 = EDGE_LOOP('',(#8821,#8822,#8823,#8824));+#8821 = ORIENTED_EDGE('',*,*,#7240,.T.);+#8822 = ORIENTED_EDGE('',*,*,#8798,.T.);+#8823 = ORIENTED_EDGE('',*,*,#8194,.T.);+#8824 = ORIENTED_EDGE('',*,*,#8825,.F.);+#8825 = EDGE_CURVE('',#7205,#8195,#8826,.T.);+#8826 = SURFACE_CURVE('',#8827,(#8831,#8838),.PCURVE_S1.);+#8827 = LINE('',#8828,#8829);+#8828 = CARTESIAN_POINT('',(-0.888035632739,-8.22215425748E-02,1.8000001+ ));+#8829 = VECTOR('',#8830,1.);+#8830 = DIRECTION('',(-0.,-0.,-1.));+#8831 = PCURVE('',#7260,#8832);+#8832 = DEFINITIONAL_REPRESENTATION('',(#8833),#8837);+#8833 = LINE('',#8834,#8835);+#8834 = CARTESIAN_POINT('',(1.,0.));+#8835 = VECTOR('',#8836,1.);+#8836 = DIRECTION('',(0.,-1.));+#8837 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8838 = PCURVE('',#7224,#8839);+#8839 = DEFINITIONAL_REPRESENTATION('',(#8840),#8844);+#8840 = LINE('',#8841,#8842);+#8841 = CARTESIAN_POINT('',(0.,0.));+#8842 = VECTOR('',#8843,1.);+#8843 = DIRECTION('',(0.,-1.));+#8844 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8845 = ADVANCED_FACE('',(#8846),#7224,.T.);+#8846 = FACE_BOUND('',#8847,.T.);+#8847 = EDGE_LOOP('',(#8848,#8849,#8850,#8851));+#8848 = ORIENTED_EDGE('',*,*,#7204,.T.);+#8849 = ORIENTED_EDGE('',*,*,#8825,.T.);+#8850 = ORIENTED_EDGE('',*,*,#8217,.T.);+#8851 = ORIENTED_EDGE('',*,*,#8852,.F.);+#8852 = EDGE_CURVE('',#7160,#8218,#8853,.T.);+#8853 = SURFACE_CURVE('',#8854,(#8858,#8865),.PCURVE_S1.);+#8854 = LINE('',#8855,#8856);+#8855 = CARTESIAN_POINT('',(-0.853943773623,-7.240938984592E-02,+ 1.8000001));+#8856 = VECTOR('',#8857,1.);+#8857 = DIRECTION('',(-0.,-0.,-1.));+#8858 = PCURVE('',#7224,#8859);+#8859 = DEFINITIONAL_REPRESENTATION('',(#8860),#8864);+#8860 = LINE('',#8861,#8862);+#8861 = CARTESIAN_POINT('',(1.,0.));+#8862 = VECTOR('',#8863,1.);+#8863 = DIRECTION('',(0.,-1.));+#8864 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8865 = PCURVE('',#7185,#8866);+#8866 = DEFINITIONAL_REPRESENTATION('',(#8867),#8871);+#8867 = LINE('',#8868,#8869);+#8868 = CARTESIAN_POINT('',(0.,0.));+#8869 = VECTOR('',#8870,1.);+#8870 = DIRECTION('',(0.,-1.));+#8871 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8872 = ADVANCED_FACE('',(#8873),#7185,.T.);+#8873 = FACE_BOUND('',#8874,.T.);+#8874 = EDGE_LOOP('',(#8875,#8876,#8877,#8878));+#8875 = ORIENTED_EDGE('',*,*,#7159,.T.);+#8876 = ORIENTED_EDGE('',*,*,#8852,.T.);+#8877 = ORIENTED_EDGE('',*,*,#8240,.T.);+#8878 = ORIENTED_EDGE('',*,*,#8879,.F.);+#8879 = EDGE_CURVE('',#7124,#8241,#8880,.T.);+#8880 = SURFACE_CURVE('',#8881,(#8885,#8892),.PCURVE_S1.);+#8881 = LINE('',#8882,#8883);+#8882 = CARTESIAN_POINT('',(-0.841768109653,-4.497833513674E-02,+ 1.8000001));+#8883 = VECTOR('',#8884,1.);+#8884 = DIRECTION('',(-0.,-0.,-1.));+#8885 = PCURVE('',#7185,#8886);+#8886 = DEFINITIONAL_REPRESENTATION('',(#8887),#8891);+#8887 = LINE('',#8888,#8889);+#8888 = CARTESIAN_POINT('',(1.,0.));+#8889 = VECTOR('',#8890,1.);+#8890 = DIRECTION('',(0.,-1.));+#8891 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8892 = PCURVE('',#7143,#8893);+#8893 = DEFINITIONAL_REPRESENTATION('',(#8894),#8898);+#8894 = LINE('',#8895,#8896);+#8895 = CARTESIAN_POINT('',(0.,0.));+#8896 = VECTOR('',#8897,1.);+#8897 = DIRECTION('',(0.,-1.));+#8898 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8899 = ADVANCED_FACE('',(#8900),#7143,.T.);+#8900 = FACE_BOUND('',#8901,.T.);+#8901 = EDGE_LOOP('',(#8902,#8903,#8904,#8905));+#8902 = ORIENTED_EDGE('',*,*,#7123,.T.);+#8903 = ORIENTED_EDGE('',*,*,#8879,.T.);+#8904 = ORIENTED_EDGE('',*,*,#8263,.T.);+#8905 = ORIENTED_EDGE('',*,*,#8906,.F.);+#8906 = EDGE_CURVE('',#7088,#8264,#8907,.T.);+#8907 = SURFACE_CURVE('',#8908,(#8912,#8919),.PCURVE_S1.);+#8908 = LINE('',#8909,#8910);+#8909 = CARTESIAN_POINT('',(-0.850147831327,-2.048376409093E-02,+ 1.8000001));+#8910 = VECTOR('',#8911,1.);+#8911 = DIRECTION('',(-0.,-0.,-1.));+#8912 = PCURVE('',#7143,#8913);+#8913 = DEFINITIONAL_REPRESENTATION('',(#8914),#8918);+#8914 = LINE('',#8915,#8916);+#8915 = CARTESIAN_POINT('',(1.,0.));+#8916 = VECTOR('',#8917,1.);+#8917 = DIRECTION('',(0.,-1.));+#8918 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8919 = PCURVE('',#7107,#8920);+#8920 = DEFINITIONAL_REPRESENTATION('',(#8921),#8925);+#8921 = LINE('',#8922,#8923);+#8922 = CARTESIAN_POINT('',(0.,0.));+#8923 = VECTOR('',#8924,1.);+#8924 = DIRECTION('',(0.,-1.));+#8925 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8926 = ADVANCED_FACE('',(#8927),#7107,.T.);+#8927 = FACE_BOUND('',#8928,.T.);+#8928 = EDGE_LOOP('',(#8929,#8930,#8931,#8932));+#8929 = ORIENTED_EDGE('',*,*,#7087,.T.);+#8930 = ORIENTED_EDGE('',*,*,#8906,.T.);+#8931 = ORIENTED_EDGE('',*,*,#8286,.T.);+#8932 = ORIENTED_EDGE('',*,*,#8933,.F.);+#8933 = EDGE_CURVE('',#7061,#8287,#8934,.T.);+#8934 = SURFACE_CURVE('',#8935,(#8939,#8946),.PCURVE_S1.);+#8935 = LINE('',#8936,#8937);+#8936 = CARTESIAN_POINT('',(-0.879297803302,-7.448641487612E-03,+ 1.8000001));+#8937 = VECTOR('',#8938,1.);+#8938 = DIRECTION('',(-0.,-0.,-1.));+#8939 = PCURVE('',#7107,#8940);+#8940 = DEFINITIONAL_REPRESENTATION('',(#8941),#8945);+#8941 = LINE('',#8942,#8943);+#8942 = CARTESIAN_POINT('',(1.,0.));+#8943 = VECTOR('',#8944,1.);+#8944 = DIRECTION('',(0.,-1.));+#8945 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8946 = PCURVE('',#7076,#8947);+#8947 = DEFINITIONAL_REPRESENTATION('',(#8948),#8952);+#8948 = LINE('',#8949,#8950);+#8949 = CARTESIAN_POINT('',(0.,0.));+#8950 = VECTOR('',#8951,1.);+#8951 = DIRECTION('',(0.,-1.));+#8952 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8953 = ADVANCED_FACE('',(#8954),#7076,.T.);+#8954 = FACE_BOUND('',#8955,.T.);+#8955 = EDGE_LOOP('',(#8956,#8957,#8958,#8959));+#8956 = ORIENTED_EDGE('',*,*,#7060,.T.);+#8957 = ORIENTED_EDGE('',*,*,#8933,.T.);+#8958 = ORIENTED_EDGE('',*,*,#8309,.T.);+#8959 = ORIENTED_EDGE('',*,*,#8960,.F.);+#8960 = EDGE_CURVE('',#7025,#8310,#8961,.T.);+#8961 = SURFACE_CURVE('',#8962,(#8966,#8973),.PCURVE_S1.);+#8962 = LINE('',#8963,#8964);+#8963 = CARTESIAN_POINT('',(-0.894768058699,-3.867563849337E-03,+ 1.8000001));+#8964 = VECTOR('',#8965,1.);+#8965 = DIRECTION('',(-0.,-0.,-1.));+#8966 = PCURVE('',#7076,#8967);+#8967 = DEFINITIONAL_REPRESENTATION('',(#8968),#8972);+#8968 = LINE('',#8969,#8970);+#8969 = CARTESIAN_POINT('',(1.587932363517E-02,0.));+#8970 = VECTOR('',#8971,1.);+#8971 = DIRECTION('',(0.,-1.));+#8972 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8973 = PCURVE('',#7044,#8974);+#8974 = DEFINITIONAL_REPRESENTATION('',(#8975),#8979);+#8975 = LINE('',#8976,#8977);+#8976 = CARTESIAN_POINT('',(0.,0.));+#8977 = VECTOR('',#8978,1.);+#8978 = DIRECTION('',(0.,-1.));+#8979 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8980 = ADVANCED_FACE('',(#8981),#7044,.T.);+#8981 = FACE_BOUND('',#8982,.T.);+#8982 = EDGE_LOOP('',(#8983,#8984,#8985,#8986));+#8983 = ORIENTED_EDGE('',*,*,#7024,.T.);+#8984 = ORIENTED_EDGE('',*,*,#8960,.T.);+#8985 = ORIENTED_EDGE('',*,*,#8332,.T.);+#8986 = ORIENTED_EDGE('',*,*,#8987,.F.);+#8987 = EDGE_CURVE('',#6989,#8333,#8988,.T.);+#8988 = SURFACE_CURVE('',#8989,(#8993,#9000),.PCURVE_S1.);+#8989 = LINE('',#8990,#8991);+#8990 = CARTESIAN_POINT('',(-0.93802747657,1.647295713607E-02,1.8000001)+ );+#8991 = VECTOR('',#8992,1.);+#8992 = DIRECTION('',(-0.,-0.,-1.));+#8993 = PCURVE('',#7044,#8994);+#8994 = DEFINITIONAL_REPRESENTATION('',(#8995),#8999);+#8995 = LINE('',#8996,#8997);+#8996 = CARTESIAN_POINT('',(1.,0.));+#8997 = VECTOR('',#8998,1.);+#8998 = DIRECTION('',(0.,-1.));+#8999 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9000 = PCURVE('',#7008,#9001);+#9001 = DEFINITIONAL_REPRESENTATION('',(#9002),#9006);+#9002 = LINE('',#9003,#9004);+#9003 = CARTESIAN_POINT('',(0.,0.));+#9004 = VECTOR('',#9005,1.);+#9005 = DIRECTION('',(0.,-1.));+#9006 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9007 = ADVANCED_FACE('',(#9008),#7008,.T.);+#9008 = FACE_BOUND('',#9009,.T.);+#9009 = EDGE_LOOP('',(#9010,#9011,#9012,#9013));+#9010 = ORIENTED_EDGE('',*,*,#6988,.T.);+#9011 = ORIENTED_EDGE('',*,*,#8987,.T.);+#9012 = ORIENTED_EDGE('',*,*,#8355,.T.);+#9013 = ORIENTED_EDGE('',*,*,#9014,.F.);+#9014 = EDGE_CURVE('',#6944,#8356,#9015,.T.);+#9015 = SURFACE_CURVE('',#9016,(#9020,#9027),.PCURVE_S1.);+#9016 = LINE('',#9017,#9018);+#9017 = CARTESIAN_POINT('',(-0.95149232849,5.299994904647E-02,1.8000001)+ );+#9018 = VECTOR('',#9019,1.);+#9019 = DIRECTION('',(-0.,-0.,-1.));+#9020 = PCURVE('',#7008,#9021);+#9021 = DEFINITIONAL_REPRESENTATION('',(#9022),#9026);+#9022 = LINE('',#9023,#9024);+#9023 = CARTESIAN_POINT('',(1.,0.));+#9024 = VECTOR('',#9025,1.);+#9025 = DIRECTION('',(0.,-1.));+#9026 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9027 = PCURVE('',#6969,#9028);+#9028 = DEFINITIONAL_REPRESENTATION('',(#9029),#9033);+#9029 = LINE('',#9030,#9031);+#9030 = CARTESIAN_POINT('',(0.,0.));+#9031 = VECTOR('',#9032,1.);+#9032 = DIRECTION('',(0.,-1.));+#9033 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9034 = ADVANCED_FACE('',(#9035),#6969,.T.);+#9035 = FACE_BOUND('',#9036,.T.);+#9036 = EDGE_LOOP('',(#9037,#9038,#9039,#9040));+#9037 = ORIENTED_EDGE('',*,*,#6943,.T.);+#9038 = ORIENTED_EDGE('',*,*,#9014,.T.);+#9039 = ORIENTED_EDGE('',*,*,#8378,.T.);+#9040 = ORIENTED_EDGE('',*,*,#9041,.F.);+#9041 = EDGE_CURVE('',#6908,#8379,#9042,.T.);+#9042 = SURFACE_CURVE('',#9043,(#9047,#9054),.PCURVE_S1.);+#9043 = LINE('',#9044,#9045);+#9044 = CARTESIAN_POINT('',(-0.932226130796,9.890936436916E-02,1.8000001+ ));+#9045 = VECTOR('',#9046,1.);+#9046 = DIRECTION('',(-0.,-0.,-1.));+#9047 = PCURVE('',#6969,#9048);+#9048 = DEFINITIONAL_REPRESENTATION('',(#9049),#9053);+#9049 = LINE('',#9050,#9051);+#9050 = CARTESIAN_POINT('',(1.,0.));+#9051 = VECTOR('',#9052,1.);+#9052 = DIRECTION('',(0.,-1.));+#9053 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9054 = PCURVE('',#6927,#9055);+#9055 = DEFINITIONAL_REPRESENTATION('',(#9056),#9060);+#9056 = LINE('',#9057,#9058);+#9057 = CARTESIAN_POINT('',(0.,0.));+#9058 = VECTOR('',#9059,1.);+#9059 = DIRECTION('',(0.,-1.));+#9060 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9061 = ADVANCED_FACE('',(#9062),#6927,.T.);+#9062 = FACE_BOUND('',#9063,.T.);+#9063 = EDGE_LOOP('',(#9064,#9065,#9066,#9067));+#9064 = ORIENTED_EDGE('',*,*,#6907,.T.);+#9065 = ORIENTED_EDGE('',*,*,#9041,.T.);+#9066 = ORIENTED_EDGE('',*,*,#8401,.T.);+#9067 = ORIENTED_EDGE('',*,*,#9068,.F.);+#9068 = EDGE_CURVE('',#6872,#8402,#9069,.T.);+#9069 = SURFACE_CURVE('',#9070,(#9074,#9081),.PCURVE_S1.);+#9070 = LINE('',#9071,#9072);+#9071 = CARTESIAN_POINT('',(-0.881016720568,0.116170158586,1.8000001));+#9072 = VECTOR('',#9073,1.);+#9073 = DIRECTION('',(-0.,-0.,-1.));+#9074 = PCURVE('',#6927,#9075);+#9075 = DEFINITIONAL_REPRESENTATION('',(#9076),#9080);+#9076 = LINE('',#9077,#9078);+#9077 = CARTESIAN_POINT('',(1.,0.));+#9078 = VECTOR('',#9079,1.);+#9079 = DIRECTION('',(0.,-1.));+#9080 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9081 = PCURVE('',#6891,#9082);+#9082 = DEFINITIONAL_REPRESENTATION('',(#9083),#9087);+#9083 = LINE('',#9084,#9085);+#9084 = CARTESIAN_POINT('',(0.,0.));+#9085 = VECTOR('',#9086,1.);+#9086 = DIRECTION('',(0.,-1.));+#9087 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9088 = ADVANCED_FACE('',(#9089),#6891,.T.);+#9089 = FACE_BOUND('',#9090,.T.);+#9090 = EDGE_LOOP('',(#9091,#9092,#9093,#9094));+#9091 = ORIENTED_EDGE('',*,*,#6871,.T.);+#9092 = ORIENTED_EDGE('',*,*,#9068,.T.);+#9093 = ORIENTED_EDGE('',*,*,#8424,.T.);+#9094 = ORIENTED_EDGE('',*,*,#9095,.F.);+#9095 = EDGE_CURVE('',#6836,#8425,#9096,.T.);+#9096 = SURFACE_CURVE('',#9097,(#9101,#9108),.PCURVE_S1.);+#9097 = LINE('',#9098,#9099);+#9098 = CARTESIAN_POINT('',(-0.855089718467,0.113376918028,1.8000001));+#9099 = VECTOR('',#9100,1.);+#9100 = DIRECTION('',(-0.,-0.,-1.));+#9101 = PCURVE('',#6891,#9102);+#9102 = DEFINITIONAL_REPRESENTATION('',(#9103),#9107);+#9103 = LINE('',#9104,#9105);+#9104 = CARTESIAN_POINT('',(1.,0.));+#9105 = VECTOR('',#9106,1.);+#9106 = DIRECTION('',(0.,-1.));+#9107 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9108 = PCURVE('',#6855,#9109);+#9109 = DEFINITIONAL_REPRESENTATION('',(#9110),#9114);+#9110 = LINE('',#9111,#9112);+#9111 = CARTESIAN_POINT('',(0.,0.));+#9112 = VECTOR('',#9113,1.);+#9113 = DIRECTION('',(0.,-1.));+#9114 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9115 = ADVANCED_FACE('',(#9116),#6855,.T.);+#9116 = FACE_BOUND('',#9117,.T.);+#9117 = EDGE_LOOP('',(#9118,#9119,#9120,#9121));+#9118 = ORIENTED_EDGE('',*,*,#6835,.T.);+#9119 = ORIENTED_EDGE('',*,*,#9095,.T.);+#9120 = ORIENTED_EDGE('',*,*,#8447,.T.);+#9121 = ORIENTED_EDGE('',*,*,#9122,.F.);+#9122 = EDGE_CURVE('',#6809,#7849,#9123,.T.);+#9123 = SURFACE_CURVE('',#9124,(#9128,#9135),.PCURVE_S1.);+#9124 = LINE('',#9125,#9126);+#9125 = CARTESIAN_POINT('',(-0.826441097361,0.104997196354,1.8000001));+#9126 = VECTOR('',#9127,1.);+#9127 = DIRECTION('',(-0.,-0.,-1.));+#9128 = PCURVE('',#6855,#9129);+#9129 = DEFINITIONAL_REPRESENTATION('',(#9130),#9134);+#9130 = LINE('',#9131,#9132);+#9131 = CARTESIAN_POINT('',(1.,0.));+#9132 = VECTOR('',#9133,1.);+#9133 = DIRECTION('',(0.,-1.));+#9134 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9135 = PCURVE('',#6824,#9136);+#9136 = DEFINITIONAL_REPRESENTATION('',(#9137),#9141);+#9137 = LINE('',#9138,#9139);+#9138 = CARTESIAN_POINT('',(0.,0.));+#9139 = VECTOR('',#9140,1.);+#9140 = DIRECTION('',(0.,-1.));+#9141 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9142 = ADVANCED_FACE('',(#9143),#6824,.T.);+#9143 = FACE_BOUND('',#9144,.T.);+#9144 = EDGE_LOOP('',(#9145,#9146,#9147,#9148));+#9145 = ORIENTED_EDGE('',*,*,#6808,.T.);+#9146 = ORIENTED_EDGE('',*,*,#9122,.T.);+#9147 = ORIENTED_EDGE('',*,*,#7848,.T.);+#9148 = ORIENTED_EDGE('',*,*,#9149,.F.);+#9149 = EDGE_CURVE('',#6773,#7851,#9150,.T.);+#9150 = SURFACE_CURVE('',#9151,(#9155,#9162),.PCURVE_S1.);+#9151 = LINE('',#9152,#9153);+#9152 = CARTESIAN_POINT('',(-0.826441097361,7.563235972037E-02,1.8000001+ ));+#9153 = VECTOR('',#9154,1.);+#9154 = DIRECTION('',(-0.,-0.,-1.));+#9155 = PCURVE('',#6824,#9156);+#9156 = DEFINITIONAL_REPRESENTATION('',(#9157),#9161);+#9157 = LINE('',#9158,#9159);+#9158 = CARTESIAN_POINT('',(2.936483663386E-02,0.));+#9159 = VECTOR('',#9160,1.);+#9160 = DIRECTION('',(0.,-1.));+#9161 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9162 = PCURVE('',#6792,#9163);+#9163 = DEFINITIONAL_REPRESENTATION('',(#9164),#9168);+#9164 = LINE('',#9165,#9166);+#9165 = CARTESIAN_POINT('',(0.,0.));+#9166 = VECTOR('',#9167,1.);+#9167 = DIRECTION('',(0.,-1.));+#9168 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9169 = ADVANCED_FACE('',(#9170),#6792,.T.);+#9170 = FACE_BOUND('',#9171,.T.);+#9171 = EDGE_LOOP('',(#9172,#9173,#9174,#9175));+#9172 = ORIENTED_EDGE('',*,*,#6770,.T.);+#9173 = ORIENTED_EDGE('',*,*,#9149,.T.);+#9174 = ORIENTED_EDGE('',*,*,#7873,.T.);+#9175 = ORIENTED_EDGE('',*,*,#7773,.F.);+#9176 = ADVANCED_FACE('',(#9177),#6757,.T.);+#9177 = FACE_BOUND('',#9178,.T.);+#9178 = EDGE_LOOP('',(#9179,#9180,#9203,#9231));+#9179 = ORIENTED_EDGE('',*,*,#6743,.T.);+#9180 = ORIENTED_EDGE('',*,*,#9181,.T.);+#9181 = EDGE_CURVE('',#6499,#9182,#9184,.T.);+#9182 = VERTEX_POINT('',#9183);+#9183 = CARTESIAN_POINT('',(-0.738203344354,0.112302594736,1.7000001));+#9184 = SURFACE_CURVE('',#9185,(#9189,#9196),.PCURVE_S1.);+#9185 = LINE('',#9186,#9187);+#9186 = CARTESIAN_POINT('',(-0.738203344354,0.112302594736,1.8000001));+#9187 = VECTOR('',#9188,1.);+#9188 = DIRECTION('',(-0.,-0.,-1.));+#9189 = PCURVE('',#6757,#9190);+#9190 = DEFINITIONAL_REPRESENTATION('',(#9191),#9195);+#9191 = LINE('',#9192,#9193);+#9192 = CARTESIAN_POINT('',(0.,0.));+#9193 = VECTOR('',#9194,1.);+#9194 = DIRECTION('',(0.,-1.));+#9195 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9196 = PCURVE('',#6516,#9197);+#9197 = DEFINITIONAL_REPRESENTATION('',(#9198),#9202);+#9198 = LINE('',#9199,#9200);+#9199 = CARTESIAN_POINT('',(3.667023501594E-02,0.));+#9200 = VECTOR('',#9201,1.);+#9201 = DIRECTION('',(0.,-1.));+#9202 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9203 = ORIENTED_EDGE('',*,*,#9204,.T.);+#9204 = EDGE_CURVE('',#9182,#9205,#9207,.T.);+#9205 = VERTEX_POINT('',#9206);+#9206 = CARTESIAN_POINT('',(-0.666008819166,-6.37431819613E-02,1.7000001+ ));+#9207 = SURFACE_CURVE('',#9208,(#9212,#9219),.PCURVE_S1.);+#9208 = LINE('',#9209,#9210);+#9209 = CARTESIAN_POINT('',(-0.738203344354,0.112302594736,1.7000001));+#9210 = VECTOR('',#9211,1.);+#9211 = DIRECTION('',(0.379424173637,-0.92522283611,0.));+#9212 = PCURVE('',#6757,#9213);+#9213 = DEFINITIONAL_REPRESENTATION('',(#9214),#9218);+#9214 = LINE('',#9215,#9216);+#9215 = CARTESIAN_POINT('',(0.,-0.1));+#9216 = VECTOR('',#9217,1.);+#9217 = DIRECTION('',(1.,0.));+#9218 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9219 = PCURVE('',#9220,#9225);+#9220 = PLANE('',#9221);+#9221 = AXIS2_PLACEMENT_3D('',#9222,#9223,#9224);+#9222 = CARTESIAN_POINT('',(-0.794784371039,-0.101559361821,1.7000001));+#9223 = DIRECTION('',(0.,0.,1.));+#9224 = DIRECTION('',(1.,0.,0.));+#9225 = DEFINITIONAL_REPRESENTATION('',(#9226),#9230);+#9226 = LINE('',#9227,#9228);+#9227 = CARTESIAN_POINT('',(5.658102668475E-02,0.213861956558));+#9228 = VECTOR('',#9229,1.);+#9229 = DIRECTION('',(0.379424173637,-0.92522283611));+#9230 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9231 = ORIENTED_EDGE('',*,*,#9232,.F.);+#9232 = EDGE_CURVE('',#6717,#9205,#9233,.T.);+#9233 = SURFACE_CURVE('',#9234,(#9238,#9245),.PCURVE_S1.);+#9234 = LINE('',#9235,#9236);+#9235 = CARTESIAN_POINT('',(-0.666008819166,-6.37431819613E-02,1.8000001+ ));+#9236 = VECTOR('',#9237,1.);+#9237 = DIRECTION('',(-0.,-0.,-1.));+#9238 = PCURVE('',#6757,#9239);+#9239 = DEFINITIONAL_REPRESENTATION('',(#9240),#9244);+#9240 = LINE('',#9241,#9242);+#9241 = CARTESIAN_POINT('',(0.190273920862,0.));+#9242 = VECTOR('',#9243,1.);+#9243 = DIRECTION('',(0.,-1.));+#9244 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9245 = PCURVE('',#6732,#9246);+#9246 = DEFINITIONAL_REPRESENTATION('',(#9247),#9251);+#9247 = LINE('',#9248,#9249);+#9248 = CARTESIAN_POINT('',(0.,0.));+#9249 = VECTOR('',#9250,1.);+#9250 = DIRECTION('',(0.,-1.));+#9251 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9252 = ADVANCED_FACE('',(#9253),#9220,.T.);+#9253 = FACE_BOUND('',#9254,.F.);+#9254 = EDGE_LOOP('',(#9255,#9280,#9301,#9302,#9325,#9348,#9371,#9394,+ #9417,#9440));+#9255 = ORIENTED_EDGE('',*,*,#9256,.T.);+#9256 = EDGE_CURVE('',#9257,#9259,#9261,.T.);+#9257 = VERTEX_POINT('',#9258);+#9258 = CARTESIAN_POINT('',(-0.77487357937,-0.101559361821,1.7000001));+#9259 = VERTEX_POINT('',#9260);+#9260 = CARTESIAN_POINT('',(-0.77487357937,0.112302594736,1.7000001));+#9261 = SURFACE_CURVE('',#9262,(#9266,#9273),.PCURVE_S1.);+#9262 = LINE('',#9263,#9264);+#9263 = CARTESIAN_POINT('',(-0.77487357937,-0.101559361821,1.7000001));+#9264 = VECTOR('',#9265,1.);+#9265 = DIRECTION('',(0.,1.,0.));+#9266 = PCURVE('',#9220,#9267);+#9267 = DEFINITIONAL_REPRESENTATION('',(#9268),#9272);+#9268 = LINE('',#9269,#9270);+#9269 = CARTESIAN_POINT('',(1.991079166881E-02,0.));+#9270 = VECTOR('',#9271,1.);+#9271 = DIRECTION('',(0.,1.));+#9272 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9273 = PCURVE('',#6543,#9274);+#9274 = DEFINITIONAL_REPRESENTATION('',(#9275),#9279);+#9275 = LINE('',#9276,#9277);+#9276 = CARTESIAN_POINT('',(0.,-0.1));+#9277 = VECTOR('',#9278,1.);+#9278 = DIRECTION('',(1.,0.));+#9279 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9280 = ORIENTED_EDGE('',*,*,#9281,.T.);+#9281 = EDGE_CURVE('',#9259,#9182,#9282,.T.);+#9282 = SURFACE_CURVE('',#9283,(#9287,#9294),.PCURVE_S1.);+#9283 = LINE('',#9284,#9285);+#9284 = CARTESIAN_POINT('',(-0.77487357937,0.112302594736,1.7000001));+#9285 = VECTOR('',#9286,1.);+#9286 = DIRECTION('',(1.,0.,0.));+#9287 = PCURVE('',#9220,#9288);+#9288 = DEFINITIONAL_REPRESENTATION('',(#9289),#9293);+#9289 = LINE('',#9290,#9291);+#9290 = CARTESIAN_POINT('',(1.991079166881E-02,0.213861956558));+#9291 = VECTOR('',#9292,1.);+#9292 = DIRECTION('',(1.,0.));+#9293 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9294 = PCURVE('',#6516,#9295);+#9295 = DEFINITIONAL_REPRESENTATION('',(#9296),#9300);+#9296 = LINE('',#9297,#9298);+#9297 = CARTESIAN_POINT('',(0.,-0.1));+#9298 = VECTOR('',#9299,1.);+#9299 = DIRECTION('',(1.,0.));+#9300 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9301 = ORIENTED_EDGE('',*,*,#9204,.T.);+#9302 = ORIENTED_EDGE('',*,*,#9303,.T.);+#9303 = EDGE_CURVE('',#9205,#9304,#9306,.T.);+#9304 = VERTEX_POINT('',#9305);+#9305 = CARTESIAN_POINT('',(-0.666008819166,0.112302594736,1.7000001));+#9306 = SURFACE_CURVE('',#9307,(#9311,#9318),.PCURVE_S1.);+#9307 = LINE('',#9308,#9309);+#9308 = CARTESIAN_POINT('',(-0.666008819166,-6.37431819613E-02,1.7000001+ ));+#9309 = VECTOR('',#9310,1.);+#9310 = DIRECTION('',(0.,1.,0.));+#9311 = PCURVE('',#9220,#9312);+#9312 = DEFINITIONAL_REPRESENTATION('',(#9313),#9317);+#9313 = LINE('',#9314,#9315);+#9314 = CARTESIAN_POINT('',(0.128775551872,3.781617986019E-02));+#9315 = VECTOR('',#9316,1.);+#9316 = DIRECTION('',(0.,1.));+#9317 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9318 = PCURVE('',#6732,#9319);+#9319 = DEFINITIONAL_REPRESENTATION('',(#9320),#9324);+#9320 = LINE('',#9321,#9322);+#9321 = CARTESIAN_POINT('',(0.,-0.1));+#9322 = VECTOR('',#9323,1.);+#9323 = DIRECTION('',(1.,0.));+#9324 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9325 = ORIENTED_EDGE('',*,*,#9326,.T.);+#9326 = EDGE_CURVE('',#9304,#9327,#9329,.T.);+#9327 = VERTEX_POINT('',#9328);+#9328 = CARTESIAN_POINT('',(-0.638076413588,0.112302594736,1.7000001));+#9329 = SURFACE_CURVE('',#9330,(#9334,#9341),.PCURVE_S1.);+#9330 = LINE('',#9331,#9332);+#9331 = CARTESIAN_POINT('',(-0.666008819166,0.112302594736,1.7000001));+#9332 = VECTOR('',#9333,1.);+#9333 = DIRECTION('',(1.,0.,0.));+#9334 = PCURVE('',#9220,#9335);+#9335 = DEFINITIONAL_REPRESENTATION('',(#9336),#9340);+#9336 = LINE('',#9337,#9338);+#9337 = CARTESIAN_POINT('',(0.128775551872,0.213861956558));+#9338 = VECTOR('',#9339,1.);+#9339 = DIRECTION('',(1.,0.));+#9340 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9341 = PCURVE('',#6705,#9342);+#9342 = DEFINITIONAL_REPRESENTATION('',(#9343),#9347);+#9343 = LINE('',#9344,#9345);+#9344 = CARTESIAN_POINT('',(0.,-0.1));+#9345 = VECTOR('',#9346,1.);+#9346 = DIRECTION('',(1.,0.));+#9347 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9348 = ORIENTED_EDGE('',*,*,#9349,.T.);+#9349 = EDGE_CURVE('',#9327,#9350,#9352,.T.);+#9350 = VERTEX_POINT('',#9351);+#9351 = CARTESIAN_POINT('',(-0.638076413588,-0.101559361821,1.7000001));+#9352 = SURFACE_CURVE('',#9353,(#9357,#9364),.PCURVE_S1.);+#9353 = LINE('',#9354,#9355);+#9354 = CARTESIAN_POINT('',(-0.638076413588,0.112302594736,1.7000001));+#9355 = VECTOR('',#9356,1.);+#9356 = DIRECTION('',(0.,-1.,0.));+#9357 = PCURVE('',#9220,#9358);+#9358 = DEFINITIONAL_REPRESENTATION('',(#9359),#9363);+#9359 = LINE('',#9360,#9361);+#9360 = CARTESIAN_POINT('',(0.156707957451,0.213861956558));+#9361 = VECTOR('',#9362,1.);+#9362 = DIRECTION('',(0.,-1.));+#9363 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9364 = PCURVE('',#6678,#9365);+#9365 = DEFINITIONAL_REPRESENTATION('',(#9366),#9370);+#9366 = LINE('',#9367,#9368);+#9367 = CARTESIAN_POINT('',(0.,-0.1));+#9368 = VECTOR('',#9369,1.);+#9369 = DIRECTION('',(1.,0.));+#9370 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9371 = ORIENTED_EDGE('',*,*,#9372,.T.);+#9372 = EDGE_CURVE('',#9350,#9373,#9375,.T.);+#9373 = VERTEX_POINT('',#9374);+#9374 = CARTESIAN_POINT('',(-0.674746648604,-0.101559361821,1.7000001));+#9375 = SURFACE_CURVE('',#9376,(#9380,#9387),.PCURVE_S1.);+#9376 = LINE('',#9377,#9378);+#9377 = CARTESIAN_POINT('',(-0.638076413588,-0.101559361821,1.7000001));+#9378 = VECTOR('',#9379,1.);+#9379 = DIRECTION('',(-1.,0.,0.));+#9380 = PCURVE('',#9220,#9381);+#9381 = DEFINITIONAL_REPRESENTATION('',(#9382),#9386);+#9382 = LINE('',#9383,#9384);+#9383 = CARTESIAN_POINT('',(0.156707957451,0.));+#9384 = VECTOR('',#9385,1.);+#9385 = DIRECTION('',(-1.,0.));+#9386 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9387 = PCURVE('',#6651,#9388);+#9388 = DEFINITIONAL_REPRESENTATION('',(#9389),#9393);+#9389 = LINE('',#9390,#9391);+#9390 = CARTESIAN_POINT('',(0.,-0.1));+#9391 = VECTOR('',#9392,1.);+#9392 = DIRECTION('',(1.,0.));+#9393 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9394 = ORIENTED_EDGE('',*,*,#9395,.T.);+#9395 = EDGE_CURVE('',#9373,#9396,#9398,.T.);+#9396 = VERTEX_POINT('',#9397);+#9397 = CARTESIAN_POINT('',(-0.746941173791,7.448641487612E-02,1.7000001+ ));+#9398 = SURFACE_CURVE('',#9399,(#9403,#9410),.PCURVE_S1.);+#9399 = LINE('',#9400,#9401);+#9400 = CARTESIAN_POINT('',(-0.674746648604,-0.101559361821,1.7000001));+#9401 = VECTOR('',#9402,1.);+#9402 = DIRECTION('',(-0.379424173637,0.92522283611,0.));+#9403 = PCURVE('',#9220,#9404);+#9404 = DEFINITIONAL_REPRESENTATION('',(#9405),#9409);+#9405 = LINE('',#9406,#9407);+#9406 = CARTESIAN_POINT('',(0.120037722435,0.));+#9407 = VECTOR('',#9408,1.);+#9408 = DIRECTION('',(-0.379424173637,0.92522283611));+#9409 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9410 = PCURVE('',#6624,#9411);+#9411 = DEFINITIONAL_REPRESENTATION('',(#9412),#9416);+#9412 = LINE('',#9413,#9414);+#9413 = CARTESIAN_POINT('',(0.,-0.1));+#9414 = VECTOR('',#9415,1.);+#9415 = DIRECTION('',(1.,0.));+#9416 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9417 = ORIENTED_EDGE('',*,*,#9418,.T.);+#9418 = EDGE_CURVE('',#9396,#9419,#9421,.T.);+#9419 = VERTEX_POINT('',#9420);+#9420 = CARTESIAN_POINT('',(-0.746941173791,-0.101559361821,1.7000001));+#9421 = SURFACE_CURVE('',#9422,(#9426,#9433),.PCURVE_S1.);+#9422 = LINE('',#9423,#9424);+#9423 = CARTESIAN_POINT('',(-0.746941173791,7.448641487612E-02,1.7000001+ ));+#9424 = VECTOR('',#9425,1.);+#9425 = DIRECTION('',(0.,-1.,0.));+#9426 = PCURVE('',#9220,#9427);+#9427 = DEFINITIONAL_REPRESENTATION('',(#9428),#9432);+#9428 = LINE('',#9429,#9430);+#9429 = CARTESIAN_POINT('',(4.784319724736E-02,0.176045776698));+#9430 = VECTOR('',#9431,1.);+#9431 = DIRECTION('',(0.,-1.));+#9432 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9433 = PCURVE('',#6597,#9434);+#9434 = DEFINITIONAL_REPRESENTATION('',(#9435),#9439);+#9435 = LINE('',#9436,#9437);+#9436 = CARTESIAN_POINT('',(0.,-0.1));+#9437 = VECTOR('',#9438,1.);+#9438 = DIRECTION('',(1.,0.));+#9439 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9440 = ORIENTED_EDGE('',*,*,#9441,.T.);+#9441 = EDGE_CURVE('',#9419,#9257,#9442,.T.);+#9442 = SURFACE_CURVE('',#9443,(#9447,#9454),.PCURVE_S1.);+#9443 = LINE('',#9444,#9445);+#9444 = CARTESIAN_POINT('',(-0.746941173791,-0.101559361821,1.7000001));+#9445 = VECTOR('',#9446,1.);+#9446 = DIRECTION('',(-1.,0.,0.));+#9447 = PCURVE('',#9220,#9448);+#9448 = DEFINITIONAL_REPRESENTATION('',(#9449),#9453);+#9449 = LINE('',#9450,#9451);+#9450 = CARTESIAN_POINT('',(4.784319724736E-02,0.));+#9451 = VECTOR('',#9452,1.);+#9452 = DIRECTION('',(-1.,0.));+#9453 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9454 = PCURVE('',#6570,#9455);+#9455 = DEFINITIONAL_REPRESENTATION('',(#9456),#9460);+#9456 = LINE('',#9457,#9458);+#9457 = CARTESIAN_POINT('',(0.,-0.1));+#9458 = VECTOR('',#9459,1.);+#9459 = DIRECTION('',(1.,0.));+#9460 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9461 = ADVANCED_FACE('',(#9462),#6732,.T.);+#9462 = FACE_BOUND('',#9463,.T.);+#9463 = EDGE_LOOP('',(#9464,#9465,#9466,#9467));+#9464 = ORIENTED_EDGE('',*,*,#6716,.T.);+#9465 = ORIENTED_EDGE('',*,*,#9232,.T.);+#9466 = ORIENTED_EDGE('',*,*,#9303,.T.);+#9467 = ORIENTED_EDGE('',*,*,#9468,.F.);+#9468 = EDGE_CURVE('',#6690,#9304,#9469,.T.);+#9469 = SURFACE_CURVE('',#9470,(#9474,#9481),.PCURVE_S1.);+#9470 = LINE('',#9471,#9472);+#9471 = CARTESIAN_POINT('',(-0.666008819166,0.112302594736,1.8000001));+#9472 = VECTOR('',#9473,1.);+#9473 = DIRECTION('',(-0.,-0.,-1.));+#9474 = PCURVE('',#6732,#9475);+#9475 = DEFINITIONAL_REPRESENTATION('',(#9476),#9480);+#9476 = LINE('',#9477,#9478);+#9477 = CARTESIAN_POINT('',(0.176045776698,0.));+#9478 = VECTOR('',#9479,1.);+#9479 = DIRECTION('',(0.,-1.));+#9480 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9481 = PCURVE('',#6705,#9482);+#9482 = DEFINITIONAL_REPRESENTATION('',(#9483),#9487);+#9483 = LINE('',#9484,#9485);+#9484 = CARTESIAN_POINT('',(0.,0.));+#9485 = VECTOR('',#9486,1.);+#9486 = DIRECTION('',(0.,-1.));+#9487 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9488 = ADVANCED_FACE('',(#9489),#6705,.T.);+#9489 = FACE_BOUND('',#9490,.T.);+#9490 = EDGE_LOOP('',(#9491,#9492,#9493,#9494));+#9491 = ORIENTED_EDGE('',*,*,#6689,.T.);+#9492 = ORIENTED_EDGE('',*,*,#9468,.T.);+#9493 = ORIENTED_EDGE('',*,*,#9326,.T.);+#9494 = ORIENTED_EDGE('',*,*,#9495,.F.);+#9495 = EDGE_CURVE('',#6663,#9327,#9496,.T.);+#9496 = SURFACE_CURVE('',#9497,(#9501,#9508),.PCURVE_S1.);+#9497 = LINE('',#9498,#9499);+#9498 = CARTESIAN_POINT('',(-0.638076413588,0.112302594736,1.8000001));+#9499 = VECTOR('',#9500,1.);+#9500 = DIRECTION('',(-0.,-0.,-1.));+#9501 = PCURVE('',#6705,#9502);+#9502 = DEFINITIONAL_REPRESENTATION('',(#9503),#9507);+#9503 = LINE('',#9504,#9505);+#9504 = CARTESIAN_POINT('',(2.793240557855E-02,0.));+#9505 = VECTOR('',#9506,1.);+#9506 = DIRECTION('',(0.,-1.));+#9507 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9508 = PCURVE('',#6678,#9509);+#9509 = DEFINITIONAL_REPRESENTATION('',(#9510),#9514);+#9510 = LINE('',#9511,#9512);+#9511 = CARTESIAN_POINT('',(0.,0.));+#9512 = VECTOR('',#9513,1.);+#9513 = DIRECTION('',(0.,-1.));+#9514 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9515 = ADVANCED_FACE('',(#9516),#6678,.T.);+#9516 = FACE_BOUND('',#9517,.T.);+#9517 = EDGE_LOOP('',(#9518,#9519,#9520,#9521));+#9518 = ORIENTED_EDGE('',*,*,#6662,.T.);+#9519 = ORIENTED_EDGE('',*,*,#9495,.T.);+#9520 = ORIENTED_EDGE('',*,*,#9349,.T.);+#9521 = ORIENTED_EDGE('',*,*,#9522,.F.);+#9522 = EDGE_CURVE('',#6636,#9350,#9523,.T.);+#9523 = SURFACE_CURVE('',#9524,(#9528,#9535),.PCURVE_S1.);+#9524 = LINE('',#9525,#9526);+#9525 = CARTESIAN_POINT('',(-0.638076413588,-0.101559361821,1.8000001));+#9526 = VECTOR('',#9527,1.);+#9527 = DIRECTION('',(-0.,-0.,-1.));+#9528 = PCURVE('',#6678,#9529);+#9529 = DEFINITIONAL_REPRESENTATION('',(#9530),#9534);+#9530 = LINE('',#9531,#9532);+#9531 = CARTESIAN_POINT('',(0.213861956558,0.));+#9532 = VECTOR('',#9533,1.);+#9533 = DIRECTION('',(0.,-1.));+#9534 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9535 = PCURVE('',#6651,#9536);+#9536 = DEFINITIONAL_REPRESENTATION('',(#9537),#9541);+#9537 = LINE('',#9538,#9539);+#9538 = CARTESIAN_POINT('',(0.,0.));+#9539 = VECTOR('',#9540,1.);+#9540 = DIRECTION('',(0.,-1.));+#9541 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9542 = ADVANCED_FACE('',(#9543),#6651,.T.);+#9543 = FACE_BOUND('',#9544,.T.);+#9544 = EDGE_LOOP('',(#9545,#9546,#9547,#9548));+#9545 = ORIENTED_EDGE('',*,*,#6635,.T.);+#9546 = ORIENTED_EDGE('',*,*,#9522,.T.);+#9547 = ORIENTED_EDGE('',*,*,#9372,.T.);+#9548 = ORIENTED_EDGE('',*,*,#9549,.F.);+#9549 = EDGE_CURVE('',#6609,#9373,#9550,.T.);+#9550 = SURFACE_CURVE('',#9551,(#9555,#9562),.PCURVE_S1.);+#9551 = LINE('',#9552,#9553);+#9552 = CARTESIAN_POINT('',(-0.674746648604,-0.101559361821,1.8000001));+#9553 = VECTOR('',#9554,1.);+#9554 = DIRECTION('',(-0.,-0.,-1.));+#9555 = PCURVE('',#6651,#9556);+#9556 = DEFINITIONAL_REPRESENTATION('',(#9557),#9561);+#9557 = LINE('',#9558,#9559);+#9558 = CARTESIAN_POINT('',(3.667023501594E-02,0.));+#9559 = VECTOR('',#9560,1.);+#9560 = DIRECTION('',(0.,-1.));+#9561 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9562 = PCURVE('',#6624,#9563);+#9563 = DEFINITIONAL_REPRESENTATION('',(#9564),#9568);+#9564 = LINE('',#9565,#9566);+#9565 = CARTESIAN_POINT('',(0.,0.));+#9566 = VECTOR('',#9567,1.);+#9567 = DIRECTION('',(0.,-1.));+#9568 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9569 = ADVANCED_FACE('',(#9570),#6624,.T.);+#9570 = FACE_BOUND('',#9571,.T.);+#9571 = EDGE_LOOP('',(#9572,#9573,#9574,#9575));+#9572 = ORIENTED_EDGE('',*,*,#6608,.T.);+#9573 = ORIENTED_EDGE('',*,*,#9549,.T.);+#9574 = ORIENTED_EDGE('',*,*,#9395,.T.);+#9575 = ORIENTED_EDGE('',*,*,#9576,.F.);+#9576 = EDGE_CURVE('',#6582,#9396,#9577,.T.);+#9577 = SURFACE_CURVE('',#9578,(#9582,#9589),.PCURVE_S1.);+#9578 = LINE('',#9579,#9580);+#9579 = CARTESIAN_POINT('',(-0.746941173791,7.448641487612E-02,1.8000001+ ));+#9580 = VECTOR('',#9581,1.);+#9581 = DIRECTION('',(-0.,-0.,-1.));+#9582 = PCURVE('',#6624,#9583);+#9583 = DEFINITIONAL_REPRESENTATION('',(#9584),#9588);+#9584 = LINE('',#9585,#9586);+#9585 = CARTESIAN_POINT('',(0.190273920862,0.));+#9586 = VECTOR('',#9587,1.);+#9587 = DIRECTION('',(0.,-1.));+#9588 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9589 = PCURVE('',#6597,#9590);+#9590 = DEFINITIONAL_REPRESENTATION('',(#9591),#9595);+#9591 = LINE('',#9592,#9593);+#9592 = CARTESIAN_POINT('',(0.,0.));+#9593 = VECTOR('',#9594,1.);+#9594 = DIRECTION('',(0.,-1.));+#9595 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9596 = ADVANCED_FACE('',(#9597),#6597,.T.);+#9597 = FACE_BOUND('',#9598,.T.);+#9598 = EDGE_LOOP('',(#9599,#9600,#9601,#9602));+#9599 = ORIENTED_EDGE('',*,*,#6581,.T.);+#9600 = ORIENTED_EDGE('',*,*,#9576,.T.);+#9601 = ORIENTED_EDGE('',*,*,#9418,.T.);+#9602 = ORIENTED_EDGE('',*,*,#9603,.F.);+#9603 = EDGE_CURVE('',#6555,#9419,#9604,.T.);+#9604 = SURFACE_CURVE('',#9605,(#9609,#9616),.PCURVE_S1.);+#9605 = LINE('',#9606,#9607);+#9606 = CARTESIAN_POINT('',(-0.746941173791,-0.101559361821,1.8000001));+#9607 = VECTOR('',#9608,1.);+#9608 = DIRECTION('',(-0.,-0.,-1.));+#9609 = PCURVE('',#6597,#9610);+#9610 = DEFINITIONAL_REPRESENTATION('',(#9611),#9615);+#9611 = LINE('',#9612,#9613);+#9612 = CARTESIAN_POINT('',(0.176045776698,0.));+#9613 = VECTOR('',#9614,1.);+#9614 = DIRECTION('',(0.,-1.));+#9615 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9616 = PCURVE('',#6570,#9617);+#9617 = DEFINITIONAL_REPRESENTATION('',(#9618),#9622);+#9618 = LINE('',#9619,#9620);+#9619 = CARTESIAN_POINT('',(0.,0.));+#9620 = VECTOR('',#9621,1.);+#9621 = DIRECTION('',(0.,-1.));+#9622 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9623 = ADVANCED_FACE('',(#9624),#6570,.T.);+#9624 = FACE_BOUND('',#9625,.T.);+#9625 = EDGE_LOOP('',(#9626,#9627,#9628,#9629));+#9626 = ORIENTED_EDGE('',*,*,#6554,.T.);+#9627 = ORIENTED_EDGE('',*,*,#9603,.T.);+#9628 = ORIENTED_EDGE('',*,*,#9441,.T.);+#9629 = ORIENTED_EDGE('',*,*,#9630,.F.);+#9630 = EDGE_CURVE('',#6528,#9257,#9631,.T.);+#9631 = SURFACE_CURVE('',#9632,(#9636,#9643),.PCURVE_S1.);+#9632 = LINE('',#9633,#9634);+#9633 = CARTESIAN_POINT('',(-0.77487357937,-0.101559361821,1.8000001));+#9634 = VECTOR('',#9635,1.);+#9635 = DIRECTION('',(-0.,-0.,-1.));+#9636 = PCURVE('',#6570,#9637);+#9637 = DEFINITIONAL_REPRESENTATION('',(#9638),#9642);+#9638 = LINE('',#9639,#9640);+#9639 = CARTESIAN_POINT('',(2.793240557855E-02,0.));+#9640 = VECTOR('',#9641,1.);+#9641 = DIRECTION('',(0.,-1.));+#9642 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9643 = PCURVE('',#6543,#9644);+#9644 = DEFINITIONAL_REPRESENTATION('',(#9645),#9649);+#9645 = LINE('',#9646,#9647);+#9646 = CARTESIAN_POINT('',(0.,0.));+#9647 = VECTOR('',#9648,1.);+#9648 = DIRECTION('',(0.,-1.));+#9649 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9650 = ADVANCED_FACE('',(#9651),#6543,.T.);+#9651 = FACE_BOUND('',#9652,.T.);+#9652 = EDGE_LOOP('',(#9653,#9654,#9655,#9656));+#9653 = ORIENTED_EDGE('',*,*,#6527,.T.);+#9654 = ORIENTED_EDGE('',*,*,#9630,.T.);+#9655 = ORIENTED_EDGE('',*,*,#9256,.T.);+#9656 = ORIENTED_EDGE('',*,*,#9657,.F.);+#9657 = EDGE_CURVE('',#6501,#9259,#9658,.T.);+#9658 = SURFACE_CURVE('',#9659,(#9663,#9670),.PCURVE_S1.);+#9659 = LINE('',#9660,#9661);+#9660 = CARTESIAN_POINT('',(-0.77487357937,0.112302594736,1.8000001));+#9661 = VECTOR('',#9662,1.);+#9662 = DIRECTION('',(-0.,-0.,-1.));+#9663 = PCURVE('',#6543,#9664);+#9664 = DEFINITIONAL_REPRESENTATION('',(#9665),#9669);+#9665 = LINE('',#9666,#9667);+#9666 = CARTESIAN_POINT('',(0.213861956558,0.));+#9667 = VECTOR('',#9668,1.);+#9668 = DIRECTION('',(0.,-1.));+#9669 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9670 = PCURVE('',#6516,#9671);+#9671 = DEFINITIONAL_REPRESENTATION('',(#9672),#9676);+#9672 = LINE('',#9673,#9674);+#9673 = CARTESIAN_POINT('',(0.,0.));+#9674 = VECTOR('',#9675,1.);+#9675 = DIRECTION('',(0.,-1.));+#9676 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9677 = ADVANCED_FACE('',(#9678),#6516,.T.);+#9678 = FACE_BOUND('',#9679,.T.);+#9679 = EDGE_LOOP('',(#9680,#9681,#9682,#9683));+#9680 = ORIENTED_EDGE('',*,*,#6498,.T.);+#9681 = ORIENTED_EDGE('',*,*,#9657,.T.);+#9682 = ORIENTED_EDGE('',*,*,#9281,.T.);+#9683 = ORIENTED_EDGE('',*,*,#9181,.F.);+#9684 = ADVANCED_FACE('',(#9685),#6480,.T.);+#9685 = FACE_BOUND('',#9686,.T.);+#9686 = EDGE_LOOP('',(#9687,#9688,#9711,#9739));+#9687 = ORIENTED_EDGE('',*,*,#6462,.T.);+#9688 = ORIENTED_EDGE('',*,*,#9689,.T.);+#9689 = EDGE_CURVE('',#5858,#9690,#9692,.T.);+#9690 = VERTEX_POINT('',#9691);+#9691 = CARTESIAN_POINT('',(-0.495406280479,8.902559008752E-02,1.7000001+ ));+#9692 = SURFACE_CURVE('',#9693,(#9697,#9704),.PCURVE_S1.);+#9693 = LINE('',#9694,#9695);+#9694 = CARTESIAN_POINT('',(-0.495406280479,8.902559008752E-02,1.8000001+ ));+#9695 = VECTOR('',#9696,1.);+#9696 = DIRECTION('',(-0.,-0.,-1.));+#9697 = PCURVE('',#6480,#9698);+#9698 = DEFINITIONAL_REPRESENTATION('',(#9699),#9703);+#9699 = LINE('',#9700,#9701);+#9700 = CARTESIAN_POINT('',(0.,0.));+#9701 = VECTOR('',#9702,1.);+#9702 = DIRECTION('',(0.,-1.));+#9703 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9704 = PCURVE('',#5879,#9705);+#9705 = DEFINITIONAL_REPRESENTATION('',(#9706),#9710);+#9706 = LINE('',#9707,#9708);+#9707 = CARTESIAN_POINT('',(1.,0.));+#9708 = VECTOR('',#9709,1.);+#9709 = DIRECTION('',(0.,-1.));+#9710 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9711 = ORIENTED_EDGE('',*,*,#9712,.T.);+#9712 = EDGE_CURVE('',#9690,#9713,#9715,.T.);+#9713 = VERTEX_POINT('',#9714);+#9714 = CARTESIAN_POINT('',(-0.516606260098,9.181883064537E-02,1.7000001+ ));+#9715 = SURFACE_CURVE('',#9716,(#9720,#9727),.PCURVE_S1.);+#9716 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#9717,#9718,#9719),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#9717 = CARTESIAN_POINT('',(-0.495406280479,8.902559008752E-02,1.7000001+ ));+#9718 = CARTESIAN_POINT('',(-0.505576540972,9.181883064537E-02,1.7000001+ ));+#9719 = CARTESIAN_POINT('',(-0.516606260098,9.181883064537E-02,1.7000001+ ));+#9720 = PCURVE('',#6480,#9721);+#9721 = DEFINITIONAL_REPRESENTATION('',(#9722),#9726);+#9722 = LINE('',#9723,#9724);+#9723 = CARTESIAN_POINT('',(0.,-0.1));+#9724 = VECTOR('',#9725,1.);+#9725 = DIRECTION('',(1.,0.));+#9726 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9727 = PCURVE('',#9728,#9733);+#9728 = PLANE('',#9729);+#9729 = AXIS2_PLACEMENT_3D('',#9730,#9731,#9732);+#9730 = CARTESIAN_POINT('',(-0.618165621919,-0.101559361821,1.7000001));+#9731 = DIRECTION('',(0.,0.,1.));+#9732 = DIRECTION('',(1.,0.,0.));+#9733 = DEFINITIONAL_REPRESENTATION('',(#9734),#9738);+#9734 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#9735,#9736,#9737),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#9735 = CARTESIAN_POINT('',(0.12275934144,0.190584951909));+#9736 = CARTESIAN_POINT('',(0.112589080947,0.193378192467));+#9737 = CARTESIAN_POINT('',(0.101559361821,0.193378192467));+#9738 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9739 = ORIENTED_EDGE('',*,*,#9740,.F.);+#9740 = EDGE_CURVE('',#6418,#9713,#9741,.T.);+#9741 = SURFACE_CURVE('',#9742,(#9746,#9753),.PCURVE_S1.);+#9742 = LINE('',#9743,#9744);+#9743 = CARTESIAN_POINT('',(-0.516606260098,9.181883064537E-02,1.8000001+ ));+#9744 = VECTOR('',#9745,1.);+#9745 = DIRECTION('',(-0.,-0.,-1.));+#9746 = PCURVE('',#6480,#9747);+#9747 = DEFINITIONAL_REPRESENTATION('',(#9748),#9752);+#9748 = LINE('',#9749,#9750);+#9749 = CARTESIAN_POINT('',(1.,0.));+#9750 = VECTOR('',#9751,1.);+#9751 = DIRECTION('',(0.,-1.));+#9752 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9753 = PCURVE('',#6443,#9754);+#9754 = DEFINITIONAL_REPRESENTATION('',(#9755),#9759);+#9755 = LINE('',#9756,#9757);+#9756 = CARTESIAN_POINT('',(0.,0.));+#9757 = VECTOR('',#9758,1.);+#9758 = DIRECTION('',(0.,-1.));+#9759 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9760 = ADVANCED_FACE('',(#9761,#10130),#9728,.T.);+#9761 = FACE_BOUND('',#9762,.F.);+#9762 = EDGE_LOOP('',(#9763,#9788,#9809,#9810,#9833,#9856,#9879,#9902,+ #9925,#9948,#9971,#9994,#10017,#10040,#10063,#10086,#10109));+#9763 = ORIENTED_EDGE('',*,*,#9764,.T.);+#9764 = EDGE_CURVE('',#9765,#9767,#9769,.T.);+#9765 = VERTEX_POINT('',#9766);+#9766 = CARTESIAN_POINT('',(-0.476211704338,0.107575572254,1.7000001));+#9767 = VERTEX_POINT('',#9768);+#9768 = CARTESIAN_POINT('',(-0.476211704338,8.093235462502E-02,1.7000001+ ));+#9769 = SURFACE_CURVE('',#9770,(#9774,#9781),.PCURVE_S1.);+#9770 = LINE('',#9771,#9772);+#9771 = CARTESIAN_POINT('',(-0.476211704338,0.107575572254,1.7000001));+#9772 = VECTOR('',#9773,1.);+#9773 = DIRECTION('',(0.,-1.,0.));+#9774 = PCURVE('',#9728,#9775);+#9775 = DEFINITIONAL_REPRESENTATION('',(#9776),#9780);+#9776 = LINE('',#9777,#9778);+#9777 = CARTESIAN_POINT('',(0.141953917581,0.209134934075));+#9778 = VECTOR('',#9779,1.);+#9779 = DIRECTION('',(0.,-1.));+#9780 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9781 = PCURVE('',#5911,#9782);+#9782 = DEFINITIONAL_REPRESENTATION('',(#9783),#9787);+#9783 = LINE('',#9784,#9785);+#9784 = CARTESIAN_POINT('',(0.,-0.1));+#9785 = VECTOR('',#9786,1.);+#9786 = DIRECTION('',(1.,0.));+#9787 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9788 = ORIENTED_EDGE('',*,*,#9789,.T.);+#9789 = EDGE_CURVE('',#9767,#9690,#9790,.T.);+#9790 = SURFACE_CURVE('',#9791,(#9795,#9802),.PCURVE_S1.);+#9791 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#9792,#9793,#9794),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#9792 = CARTESIAN_POINT('',(-0.476211704338,8.093235462502E-02,1.7000001+ ));+#9793 = CARTESIAN_POINT('',(-0.485236019986,8.623234952967E-02,1.7000001+ ));+#9794 = CARTESIAN_POINT('',(-0.495406280479,8.902559008752E-02,1.7000001+ ));+#9795 = PCURVE('',#9728,#9796);+#9796 = DEFINITIONAL_REPRESENTATION('',(#9797),#9801);+#9797 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#9798,#9799,#9800),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#9798 = CARTESIAN_POINT('',(0.141953917581,0.182491716447));+#9799 = CARTESIAN_POINT('',(0.132929601933,0.187791711351));+#9800 = CARTESIAN_POINT('',(0.12275934144,0.190584951909));+#9801 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9802 = PCURVE('',#5879,#9803);+#9803 = DEFINITIONAL_REPRESENTATION('',(#9804),#9808);+#9804 = LINE('',#9805,#9806);+#9805 = CARTESIAN_POINT('',(0.,-0.1));+#9806 = VECTOR('',#9807,1.);+#9807 = DIRECTION('',(1.,0.));+#9808 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9809 = ORIENTED_EDGE('',*,*,#9712,.T.);+#9810 = ORIENTED_EDGE('',*,*,#9811,.T.);+#9811 = EDGE_CURVE('',#9713,#9812,#9814,.T.);+#9812 = VERTEX_POINT('',#9813);+#9813 = CARTESIAN_POINT('',(-0.558290003807,7.112020189614E-02,1.7000001+ ));+#9814 = SURFACE_CURVE('',#9815,(#9819,#9826),.PCURVE_S1.);+#9815 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#9816,#9817,#9818),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#9816 = CARTESIAN_POINT('',(-0.516606260098,9.181883064537E-02,1.7000001+ ));+#9817 = CARTESIAN_POINT('',(-0.54410893636,9.181883064537E-02,1.7000001)+ );+#9818 = CARTESIAN_POINT('',(-0.558290003807,7.112020189614E-02,1.7000001+ ));+#9819 = PCURVE('',#9728,#9820);+#9820 = DEFINITIONAL_REPRESENTATION('',(#9821),#9825);+#9821 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#9822,#9823,#9824),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#9822 = CARTESIAN_POINT('',(0.101559361821,0.193378192467));+#9823 = CARTESIAN_POINT('',(7.405668555953E-02,0.193378192467));+#9824 = CARTESIAN_POINT('',(5.987561811196E-02,0.172679563718));+#9825 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9826 = PCURVE('',#6443,#9827);+#9827 = DEFINITIONAL_REPRESENTATION('',(#9828),#9832);+#9828 = LINE('',#9829,#9830);+#9829 = CARTESIAN_POINT('',(0.,-0.1));+#9830 = VECTOR('',#9831,1.);+#9831 = DIRECTION('',(1.,0.));+#9832 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9833 = ORIENTED_EDGE('',*,*,#9834,.T.);+#9834 = EDGE_CURVE('',#9812,#9835,#9837,.T.);+#9835 = VERTEX_POINT('',#9836);+#9836 = CARTESIAN_POINT('',(-0.572471071255,1.01702604927E-02,1.7000001)+ );+#9837 = SURFACE_CURVE('',#9838,(#9842,#9849),.PCURVE_S1.);+#9838 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#9839,#9840,#9841),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#9839 = CARTESIAN_POINT('',(-0.558290003807,7.112020189614E-02,1.7000001+ ));+#9840 = CARTESIAN_POINT('',(-0.572471071255,5.042157314691E-02,1.7000001+ ));+#9841 = CARTESIAN_POINT('',(-0.572471071255,1.01702604927E-02,1.7000001)+ );+#9842 = PCURVE('',#9728,#9843);+#9843 = DEFINITIONAL_REPRESENTATION('',(#9844),#9848);+#9844 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#9845,#9846,#9847),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#9845 = CARTESIAN_POINT('',(5.987561811196E-02,0.172679563718));+#9846 = CARTESIAN_POINT('',(4.569455066439E-02,0.151980934968));+#9847 = CARTESIAN_POINT('',(4.569455066439E-02,0.111729622314));+#9848 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9849 = PCURVE('',#6401,#9850);+#9850 = DEFINITIONAL_REPRESENTATION('',(#9851),#9855);+#9851 = LINE('',#9852,#9853);+#9852 = CARTESIAN_POINT('',(0.,-0.1));+#9853 = VECTOR('',#9854,1.);+#9854 = DIRECTION('',(1.,0.));+#9855 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9856 = ORIENTED_EDGE('',*,*,#9857,.T.);+#9857 = EDGE_CURVE('',#9835,#9858,#9860,.T.);+#9858 = VERTEX_POINT('',#9859);+#9859 = CARTESIAN_POINT('',(-0.553419738219,3.215807719171E-02,1.7000001+ ));+#9860 = SURFACE_CURVE('',#9861,(#9865,#9872),.PCURVE_S1.);+#9861 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#9862,#9863,#9864),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#9862 = CARTESIAN_POINT('',(-0.572471071255,1.01702604927E-02,1.7000001)+ );+#9863 = CARTESIAN_POINT('',(-0.565595402189,2.44945710458E-02,1.7000001)+ );+#9864 = CARTESIAN_POINT('',(-0.553419738219,3.215807719171E-02,1.7000001+ ));+#9865 = PCURVE('',#9728,#9866);+#9866 = DEFINITIONAL_REPRESENTATION('',(#9867),#9871);+#9867 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#9868,#9869,#9870),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#9868 = CARTESIAN_POINT('',(4.569455066439E-02,0.111729622314));+#9869 = CARTESIAN_POINT('',(5.257021972988E-02,0.126053932867));+#9870 = CARTESIAN_POINT('',(6.474588370001E-02,0.133717439013));+#9871 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9872 = PCURVE('',#6365,#9873);+#9873 = DEFINITIONAL_REPRESENTATION('',(#9874),#9878);+#9874 = LINE('',#9875,#9876);+#9875 = CARTESIAN_POINT('',(0.,-0.1));+#9876 = VECTOR('',#9877,1.);+#9877 = DIRECTION('',(1.,0.));+#9878 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9879 = ORIENTED_EDGE('',*,*,#9880,.T.);+#9880 = EDGE_CURVE('',#9858,#9881,#9883,.T.);+#9881 = VERTEX_POINT('',#9882);+#9882 = CARTESIAN_POINT('',(-0.52548733264,3.982158333762E-02,1.7000001)+ );+#9883 = SURFACE_CURVE('',#9884,(#9888,#9895),.PCURVE_S1.);+#9884 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#9885,#9886,#9887),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#9885 = CARTESIAN_POINT('',(-0.553419738219,3.215807719171E-02,1.7000001+ ));+#9886 = CARTESIAN_POINT('',(-0.541244074249,3.982158333762E-02,1.7000001+ ));+#9887 = CARTESIAN_POINT('',(-0.52548733264,3.982158333762E-02,1.7000001)+ );+#9888 = PCURVE('',#9728,#9889);+#9889 = DEFINITIONAL_REPRESENTATION('',(#9890),#9894);+#9890 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#9891,#9892,#9893),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#9891 = CARTESIAN_POINT('',(6.474588370001E-02,0.133717439013));+#9892 = CARTESIAN_POINT('',(7.692154767015E-02,0.141380945159));+#9893 = CARTESIAN_POINT('',(9.267828927856E-02,0.141380945159));+#9894 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9895 = PCURVE('',#6329,#9896);+#9896 = DEFINITIONAL_REPRESENTATION('',(#9897),#9901);+#9897 = LINE('',#9898,#9899);+#9898 = CARTESIAN_POINT('',(0.,-0.1));+#9899 = VECTOR('',#9900,1.);+#9900 = DIRECTION('',(1.,0.));+#9901 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9902 = ORIENTED_EDGE('',*,*,#9903,.T.);+#9903 = EDGE_CURVE('',#9881,#9904,#9906,.T.);+#9904 = VERTEX_POINT('',#9905);+#9905 = CARTESIAN_POINT('',(-0.47757251384,2.084187185476E-02,1.7000001)+ );+#9906 = SURFACE_CURVE('',#9907,(#9911,#9918),.PCURVE_S1.);+#9907 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#9908,#9909,#9910),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#9908 = CARTESIAN_POINT('',(-0.52548733264,3.982158333762E-02,1.7000001)+ );+#9909 = CARTESIAN_POINT('',(-0.494546821846,3.982158333762E-02,1.7000001+ ));+#9910 = CARTESIAN_POINT('',(-0.47757251384,2.084187185476E-02,1.7000001)+ );+#9911 = PCURVE('',#9728,#9912);+#9912 = DEFINITIONAL_REPRESENTATION('',(#9913),#9917);+#9913 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#9914,#9915,#9916),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#9914 = CARTESIAN_POINT('',(9.267828927856E-02,0.141380945159));+#9915 = CARTESIAN_POINT('',(0.123618800073,0.141380945159));+#9916 = CARTESIAN_POINT('',(0.140593108079,0.122401233676));+#9917 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9918 = PCURVE('',#6290,#9919);+#9919 = DEFINITIONAL_REPRESENTATION('',(#9920),#9924);+#9920 = LINE('',#9921,#9922);+#9921 = CARTESIAN_POINT('',(0.,-0.1));+#9922 = VECTOR('',#9923,1.);+#9923 = DIRECTION('',(1.,0.));+#9924 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9925 = ORIENTED_EDGE('',*,*,#9926,.T.);+#9926 = EDGE_CURVE('',#9904,#9927,#9929,.T.);+#9927 = VERTEX_POINT('',#9928);+#9928 = CARTESIAN_POINT('',(-0.460598205835,-3.294591427213E-02,+ 1.7000001));+#9929 = SURFACE_CURVE('',#9930,(#9934,#9941),.PCURVE_S1.);+#9930 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#9931,#9932,#9933),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#9931 = CARTESIAN_POINT('',(-0.47757251384,2.084187185476E-02,1.7000001)+ );+#9932 = CARTESIAN_POINT('',(-0.460598205835,1.862160371903E-03,1.7000001+ ));+#9933 = CARTESIAN_POINT('',(-0.460598205835,-3.294591427213E-02,+ 1.7000001));+#9934 = PCURVE('',#9728,#9935);+#9935 = DEFINITIONAL_REPRESENTATION('',(#9936),#9940);+#9936 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#9937,#9938,#9939),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#9937 = CARTESIAN_POINT('',(0.140593108079,0.122401233676));+#9938 = CARTESIAN_POINT('',(0.157567416084,0.103421522193));+#9939 = CARTESIAN_POINT('',(0.157567416084,6.861344754935E-02));+#9940 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9941 = PCURVE('',#6248,#9942);+#9942 = DEFINITIONAL_REPRESENTATION('',(#9943),#9947);+#9943 = LINE('',#9944,#9945);+#9944 = CARTESIAN_POINT('',(0.,-0.1));+#9945 = VECTOR('',#9946,1.);+#9946 = DIRECTION('',(1.,0.));+#9947 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9948 = ORIENTED_EDGE('',*,*,#9949,.T.);+#9949 = EDGE_CURVE('',#9927,#9950,#9952,.T.);+#9950 = VERTEX_POINT('',#9951);+#9951 = CARTESIAN_POINT('',(-0.47807386471,-8.666207884626E-02,1.7000001+ ));+#9952 = SURFACE_CURVE('',#9953,(#9957,#9964),.PCURVE_S1.);+#9953 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#9954,#9955,#9956),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#9954 = CARTESIAN_POINT('',(-0.460598205835,-3.294591427213E-02,+ 1.7000001));+#9955 = CARTESIAN_POINT('',(-0.460598205835,-6.761074581063E-02,+ 1.7000001));+#9956 = CARTESIAN_POINT('',(-0.47807386471,-8.666207884626E-02,1.7000001+ ));+#9957 = PCURVE('',#9728,#9958);+#9958 = DEFINITIONAL_REPRESENTATION('',(#9959),#9963);+#9959 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#9960,#9961,#9962),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#9960 = CARTESIAN_POINT('',(0.157567416084,6.861344754935E-02));+#9961 = CARTESIAN_POINT('',(0.157567416084,3.394861601085E-02));+#9962 = CARTESIAN_POINT('',(0.140091757209,1.489728297522E-02));+#9963 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9964 = PCURVE('',#6212,#9965);+#9965 = DEFINITIONAL_REPRESENTATION('',(#9966),#9970);+#9966 = LINE('',#9967,#9968);+#9967 = CARTESIAN_POINT('',(0.,-0.1));+#9968 = VECTOR('',#9969,1.);+#9969 = DIRECTION('',(1.,0.));+#9970 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9971 = ORIENTED_EDGE('',*,*,#9972,.T.);+#9972 = EDGE_CURVE('',#9950,#9973,#9975,.T.);+#9973 = VERTEX_POINT('',#9974);+#9974 = CARTESIAN_POINT('',(-0.527206249907,-0.105713411882,1.7000001));+#9975 = SURFACE_CURVE('',#9976,(#9980,#9987),.PCURVE_S1.);+#9976 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#9977,#9978,#9979),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#9977 = CARTESIAN_POINT('',(-0.47807386471,-8.666207884626E-02,1.7000001+ ));+#9978 = CARTESIAN_POINT('',(-0.495549523585,-0.105713411882,1.7000001));+#9979 = CARTESIAN_POINT('',(-0.527206249907,-0.105713411882,1.7000001));+#9980 = PCURVE('',#9728,#9981);+#9981 = DEFINITIONAL_REPRESENTATION('',(#9982),#9986);+#9982 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#9983,#9984,#9985),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#9983 = CARTESIAN_POINT('',(0.140091757209,1.489728297522E-02));+#9984 = CARTESIAN_POINT('',(0.122616098335,-4.154050060399E-03));+#9985 = CARTESIAN_POINT('',(9.095937201219E-02,-4.154050060399E-03));+#9986 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9987 = PCURVE('',#6176,#9988);+#9988 = DEFINITIONAL_REPRESENTATION('',(#9989),#9993);+#9989 = LINE('',#9990,#9991);+#9990 = CARTESIAN_POINT('',(0.,-0.1));+#9991 = VECTOR('',#9992,1.);+#9992 = DIRECTION('',(1.,0.));+#9993 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9994 = ORIENTED_EDGE('',*,*,#9995,.T.);+#9995 = EDGE_CURVE('',#9973,#9996,#9998,.T.);+#9996 = VERTEX_POINT('',#9997);+#9997 = CARTESIAN_POINT('',(-0.581781873114,-7.899857270035E-02,+ 1.7000001));+#9998 = SURFACE_CURVE('',#9999,(#10003,#10010),.PCURVE_S1.);+#9999 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#10000,#10001,#10002),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#10000 = CARTESIAN_POINT('',(-0.527206249907,-0.105713411882,1.7000001)+ );+#10001 = CARTESIAN_POINT('',(-0.564449457345,-0.105713411882,1.7000001)+ );+#10002 = CARTESIAN_POINT('',(-0.581781873114,-7.899857270035E-02,+ 1.7000001));+#10003 = PCURVE('',#9728,#10004);+#10004 = DEFINITIONAL_REPRESENTATION('',(#10005),#10009);+#10005 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#10006,#10007,#10008),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#10006 = CARTESIAN_POINT('',(9.095937201219E-02,-4.154050060399E-03));+#10007 = CARTESIAN_POINT('',(5.371616457413E-02,-4.154050060399E-03));+#10008 = CARTESIAN_POINT('',(3.638374880488E-02,2.256078912113E-02));+#10009 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10010 = PCURVE('',#6137,#10011);+#10011 = DEFINITIONAL_REPRESENTATION('',(#10012),#10016);+#10012 = LINE('',#10013,#10014);+#10013 = CARTESIAN_POINT('',(0.,-0.1));+#10014 = VECTOR('',#10015,1.);+#10015 = DIRECTION('',(1.,0.));+#10016 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10017 = ORIENTED_EDGE('',*,*,#10018,.T.);+#10018 = EDGE_CURVE('',#9996,#10019,#10021,.T.);+#10019 = VERTEX_POINT('',#10020);+#10020 = CARTESIAN_POINT('',(-0.599114288883,5.156751799116E-03,+ 1.7000001));+#10021 = SURFACE_CURVE('',#10022,(#10026,#10033),.PCURVE_S1.);+#10022 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#10023,#10024,#10025),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#10023 = CARTESIAN_POINT('',(-0.581781873114,-7.899857270035E-02,+ 1.7000001));+#10024 = CARTESIAN_POINT('',(-0.599114288883,-5.228373351882E-02,+ 1.7000001));+#10025 = CARTESIAN_POINT('',(-0.599114288883,5.156751799116E-03,+ 1.7000001));+#10026 = PCURVE('',#9728,#10027);+#10027 = DEFINITIONAL_REPRESENTATION('',(#10028),#10032);+#10028 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#10029,#10030,#10031),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#10029 = CARTESIAN_POINT('',(3.638374880488E-02,2.256078912113E-02));+#10030 = CARTESIAN_POINT('',(1.905133303562E-02,4.927562830267E-02));+#10031 = CARTESIAN_POINT('',(1.905133303562E-02,0.106716113621));+#10032 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10033 = PCURVE('',#6095,#10034);+#10034 = DEFINITIONAL_REPRESENTATION('',(#10035),#10039);+#10035 = LINE('',#10036,#10037);+#10036 = CARTESIAN_POINT('',(0.,-0.1));+#10037 = VECTOR('',#10038,1.);+#10038 = DIRECTION('',(1.,0.));+#10039 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10040 = ORIENTED_EDGE('',*,*,#10041,.T.);+#10041 = EDGE_CURVE('',#10019,#10042,#10044,.T.);+#10042 = VERTEX_POINT('',#10043);+#10043 = CARTESIAN_POINT('',(-0.578272417029,8.773640213774E-02,+ 1.7000001));+#10044 = SURFACE_CURVE('',#10045,(#10049,#10056),.PCURVE_S1.);+#10045 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#10046,#10047,#10048),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#10046 = CARTESIAN_POINT('',(-0.599114288883,5.156751799116E-03,+ 1.7000001));+#10047 = CARTESIAN_POINT('',(-0.599114288883,5.930264568984E-02,+ 1.7000001));+#10048 = CARTESIAN_POINT('',(-0.578272417029,8.773640213774E-02,+ 1.7000001));+#10049 = PCURVE('',#9728,#10050);+#10050 = DEFINITIONAL_REPRESENTATION('',(#10051),#10055);+#10051 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#10052,#10053,#10054),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#10052 = CARTESIAN_POINT('',(1.905133303562E-02,0.106716113621));+#10053 = CARTESIAN_POINT('',(1.905133303562E-02,0.160862007511));+#10054 = CARTESIAN_POINT('',(3.989320489039E-02,0.189295763959));+#10055 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10056 = PCURVE('',#6059,#10057);+#10057 = DEFINITIONAL_REPRESENTATION('',(#10058),#10062);+#10058 = LINE('',#10059,#10060);+#10059 = CARTESIAN_POINT('',(0.,-0.1));+#10060 = VECTOR('',#10061,1.);+#10061 = DIRECTION('',(1.,0.));+#10062 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10063 = ORIENTED_EDGE('',*,*,#10064,.T.);+#10064 = EDGE_CURVE('',#10042,#10065,#10067,.T.);+#10065 = VERTEX_POINT('',#10066);+#10066 = CARTESIAN_POINT('',(-0.517895448047,0.116170158586,1.7000001));+#10067 = SURFACE_CURVE('',#10068,(#10072,#10079),.PCURVE_S1.);+#10068 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#10069,#10070,#10071),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#10069 = CARTESIAN_POINT('',(-0.578272417029,8.773640213774E-02,+ 1.7000001));+#10070 = CARTESIAN_POINT('',(-0.557430545174,0.116170158586,1.7000001));+#10071 = CARTESIAN_POINT('',(-0.517895448047,0.116170158586,1.7000001));+#10072 = PCURVE('',#9728,#10073);+#10073 = DEFINITIONAL_REPRESENTATION('',(#10074),#10078);+#10074 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#10075,#10076,#10077),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#10075 = CARTESIAN_POINT('',(3.989320489039E-02,0.189295763959));+#10076 = CARTESIAN_POINT('',(6.073507674515E-02,0.217729520407));+#10077 = CARTESIAN_POINT('',(0.100270173872,0.217729520407));+#10078 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10079 = PCURVE('',#6020,#10080);+#10080 = DEFINITIONAL_REPRESENTATION('',(#10081),#10085);+#10081 = LINE('',#10082,#10083);+#10082 = CARTESIAN_POINT('',(0.,-0.1));+#10083 = VECTOR('',#10084,1.);+#10084 = DIRECTION('',(1.,0.));+#10085 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10086 = ORIENTED_EDGE('',*,*,#10087,.T.);+#10087 = EDGE_CURVE('',#10065,#10088,#10090,.T.);+#10088 = VERTEX_POINT('',#10089);+#10089 = CARTESIAN_POINT('',(-0.496695468429,0.11394989045,1.7000001));+#10090 = SURFACE_CURVE('',#10091,(#10095,#10102),.PCURVE_S1.);+#10091 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#10092,#10093,#10094),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#10092 = CARTESIAN_POINT('',(-0.517895448047,0.116170158586,1.7000001));+#10093 = CARTESIAN_POINT('',(-0.507295458238,0.116170158586,1.7000001));+#10094 = CARTESIAN_POINT('',(-0.496695468429,0.11394989045,1.7000001));+#10095 = PCURVE('',#9728,#10096);+#10096 = DEFINITIONAL_REPRESENTATION('',(#10097),#10101);+#10097 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#10098,#10099,#10100),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#10098 = CARTESIAN_POINT('',(0.100270173872,0.217729520407));+#10099 = CARTESIAN_POINT('',(0.110870163681,0.217729520407));+#10100 = CARTESIAN_POINT('',(0.12147015349,0.215509252271));+#10101 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10102 = PCURVE('',#5978,#10103);+#10103 = DEFINITIONAL_REPRESENTATION('',(#10104),#10108);+#10104 = LINE('',#10105,#10106);+#10105 = CARTESIAN_POINT('',(0.,-0.1));+#10106 = VECTOR('',#10107,1.);+#10107 = DIRECTION('',(1.,0.));+#10108 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10109 = ORIENTED_EDGE('',*,*,#10110,.T.);+#10110 = EDGE_CURVE('',#10088,#9765,#10111,.T.);+#10111 = SURFACE_CURVE('',#10112,(#10116,#10123),.PCURVE_S1.);+#10112 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#10113,#10114,#10115),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#10113 = CARTESIAN_POINT('',(-0.496695468429,0.11394989045,1.7000001));+#10114 = CARTESIAN_POINT('',(-0.486095478619,0.111729622314,1.7000001));+#10115 = CARTESIAN_POINT('',(-0.476211704338,0.107575572254,1.7000001));+#10116 = PCURVE('',#9728,#10117);+#10117 = DEFINITIONAL_REPRESENTATION('',(#10118),#10122);+#10118 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#10119,#10120,#10121),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#10119 = CARTESIAN_POINT('',(0.12147015349,0.215509252271));+#10120 = CARTESIAN_POINT('',(0.1320701433,0.213288984136));+#10121 = CARTESIAN_POINT('',(0.141953917581,0.209134934075));+#10122 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10123 = PCURVE('',#5942,#10124);+#10124 = DEFINITIONAL_REPRESENTATION('',(#10125),#10129);+#10125 = LINE('',#10126,#10127);+#10126 = CARTESIAN_POINT('',(0.,-0.1));+#10127 = VECTOR('',#10128,1.);+#10128 = DIRECTION('',(1.,0.));+#10129 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10130 = FACE_BOUND('',#10131,.F.);+#10131 = EDGE_LOOP('',(#10132,#10164,#10194,#10224,#10254,#10284,#10314,+ #10344));+#10132 = ORIENTED_EDGE('',*,*,#10133,.T.);+#10133 = EDGE_CURVE('',#10134,#10136,#10138,.T.);+#10134 = VERTEX_POINT('',#10135);+#10135 = CARTESIAN_POINT('',(-0.527779222329,1.718917266372E-02,+ 1.7000001));+#10136 = VERTEX_POINT('',#10137);+#10137 = CARTESIAN_POINT('',(-0.556857572752,3.867563849337E-03,+ 1.7000001));+#10138 = SURFACE_CURVE('',#10139,(#10143,#10150),.PCURVE_S1.);+#10139 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#10140,#10141,#10142),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#10140 = CARTESIAN_POINT('',(-0.527779222329,1.718917266372E-02,+ 1.7000001));+#10141 = CARTESIAN_POINT('',(-0.546257582942,1.718917266372E-02,+ 1.7000001));+#10142 = CARTESIAN_POINT('',(-0.556857572752,3.867563849337E-03,+ 1.7000001));+#10143 = PCURVE('',#9728,#10144);+#10144 = DEFINITIONAL_REPRESENTATION('',(#10145),#10149);+#10145 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#10146,#10147,#10148),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#10146 = CARTESIAN_POINT('',(9.038639959006E-02,0.118748534485));+#10147 = CARTESIAN_POINT('',(7.190803897656E-02,0.118748534485));+#10148 = CARTESIAN_POINT('',(6.130804916727E-02,0.105426925671));+#10149 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10150 = PCURVE('',#10151,#10158);+#10151 = SURFACE_OF_LINEAR_EXTRUSION('',#10152,#10156);+#10152 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#10153,#10154,#10155),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#10153 = CARTESIAN_POINT('',(-0.527779222329,1.718917266372E-02,+ 1.8000001));+#10154 = CARTESIAN_POINT('',(-0.546257582942,1.718917266372E-02,+ 1.8000001));+#10155 = CARTESIAN_POINT('',(-0.556857572752,3.867563849337E-03,+ 1.8000001));+#10156 = VECTOR('',#10157,1.);+#10157 = DIRECTION('',(0.,0.,1.));+#10158 = DEFINITIONAL_REPRESENTATION('',(#10159),#10163);+#10159 = LINE('',#10160,#10161);+#10160 = CARTESIAN_POINT('',(0.,-0.1));+#10161 = VECTOR('',#10162,1.);+#10162 = DIRECTION('',(1.,0.));+#10163 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10164 = ORIENTED_EDGE('',*,*,#10165,.T.);+#10165 = EDGE_CURVE('',#10136,#10166,#10168,.T.);+#10166 = VERTEX_POINT('',#10167);+#10167 = CARTESIAN_POINT('',(-0.567457562561,-3.294591427213E-02,+ 1.7000001));+#10168 = SURFACE_CURVE('',#10169,(#10173,#10180),.PCURVE_S1.);+#10169 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#10170,#10171,#10172),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#10170 = CARTESIAN_POINT('',(-0.556857572752,3.867563849337E-03,+ 1.7000001));+#10171 = CARTESIAN_POINT('',(-0.567457562561,-9.454044965046E-03,+ 1.7000001));+#10172 = CARTESIAN_POINT('',(-0.567457562561,-3.294591427213E-02,+ 1.7000001));+#10173 = PCURVE('',#9728,#10174);+#10174 = DEFINITIONAL_REPRESENTATION('',(#10175),#10179);+#10175 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#10176,#10177,#10178),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#10176 = CARTESIAN_POINT('',(6.130804916727E-02,0.105426925671));+#10177 = CARTESIAN_POINT('',(5.070805935798E-02,9.210531685644E-02));+#10178 = CARTESIAN_POINT('',(5.070805935798E-02,6.861344754935E-02));+#10179 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10180 = PCURVE('',#10181,#10188);+#10181 = SURFACE_OF_LINEAR_EXTRUSION('',#10182,#10186);+#10182 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#10183,#10184,#10185),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#10183 = CARTESIAN_POINT('',(-0.556857572752,3.867563849337E-03,+ 1.8000001));+#10184 = CARTESIAN_POINT('',(-0.567457562561,-9.454044965046E-03,+ 1.8000001));+#10185 = CARTESIAN_POINT('',(-0.567457562561,-3.294591427213E-02,+ 1.8000001));+#10186 = VECTOR('',#10187,1.);+#10187 = DIRECTION('',(0.,0.,1.));+#10188 = DEFINITIONAL_REPRESENTATION('',(#10189),#10193);+#10189 = LINE('',#10190,#10191);+#10190 = CARTESIAN_POINT('',(0.,-0.1));+#10191 = VECTOR('',#10192,1.);+#10192 = DIRECTION('',(1.,0.));+#10193 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10194 = ORIENTED_EDGE('',*,*,#10195,.T.);+#10195 = EDGE_CURVE('',#10166,#10196,#10198,.T.);+#10196 = VERTEX_POINT('',#10197);+#10197 = CARTESIAN_POINT('',(-0.556857572752,-6.97593923936E-02,+ 1.7000001));+#10198 = SURFACE_CURVE('',#10199,(#10203,#10210),.PCURVE_S1.);+#10199 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#10200,#10201,#10202),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#10200 = CARTESIAN_POINT('',(-0.567457562561,-3.294591427213E-02,+ 1.7000001));+#10201 = CARTESIAN_POINT('',(-0.567457562561,-5.643778357922E-02,+ 1.7000001));+#10202 = CARTESIAN_POINT('',(-0.556857572752,-6.97593923936E-02,+ 1.7000001));+#10203 = PCURVE('',#9728,#10204);+#10204 = DEFINITIONAL_REPRESENTATION('',(#10205),#10209);+#10205 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#10206,#10207,#10208),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#10206 = CARTESIAN_POINT('',(5.070805935798E-02,6.861344754935E-02));+#10207 = CARTESIAN_POINT('',(5.070805935798E-02,4.512157824227E-02));+#10208 = CARTESIAN_POINT('',(6.130804916727E-02,3.179996942788E-02));+#10209 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10210 = PCURVE('',#10211,#10218);+#10211 = SURFACE_OF_LINEAR_EXTRUSION('',#10212,#10216);+#10212 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#10213,#10214,#10215),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#10213 = CARTESIAN_POINT('',(-0.567457562561,-3.294591427213E-02,+ 1.8000001));+#10214 = CARTESIAN_POINT('',(-0.567457562561,-5.643778357922E-02,+ 1.8000001));+#10215 = CARTESIAN_POINT('',(-0.556857572752,-6.97593923936E-02,+ 1.8000001));+#10216 = VECTOR('',#10217,1.);+#10217 = DIRECTION('',(0.,0.,1.));+#10218 = DEFINITIONAL_REPRESENTATION('',(#10219),#10223);+#10219 = LINE('',#10220,#10221);+#10220 = CARTESIAN_POINT('',(0.,-0.1));+#10221 = VECTOR('',#10222,1.);+#10222 = DIRECTION('',(1.,0.));+#10223 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10224 = ORIENTED_EDGE('',*,*,#10225,.T.);+#10225 = EDGE_CURVE('',#10196,#10226,#10228,.T.);+#10226 = VERTEX_POINT('',#10227);+#10227 = CARTESIAN_POINT('',(-0.527779222329,-8.308100120798E-02,+ 1.7000001));+#10228 = SURFACE_CURVE('',#10229,(#10233,#10240),.PCURVE_S1.);+#10229 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#10230,#10231,#10232),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#10230 = CARTESIAN_POINT('',(-0.556857572752,-6.97593923936E-02,+ 1.7000001));+#10231 = CARTESIAN_POINT('',(-0.546257582942,-8.308100120798E-02,+ 1.7000001));+#10232 = CARTESIAN_POINT('',(-0.527779222329,-8.308100120798E-02,+ 1.7000001));+#10233 = PCURVE('',#9728,#10234);+#10234 = DEFINITIONAL_REPRESENTATION('',(#10235),#10239);+#10235 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#10236,#10237,#10238),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#10236 = CARTESIAN_POINT('',(6.130804916727E-02,3.179996942788E-02));+#10237 = CARTESIAN_POINT('',(7.190803897656E-02,1.84783606135E-02));+#10238 = CARTESIAN_POINT('',(9.038639959006E-02,1.84783606135E-02));+#10239 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10240 = PCURVE('',#10241,#10248);+#10241 = SURFACE_OF_LINEAR_EXTRUSION('',#10242,#10246);+#10242 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#10243,#10244,#10245),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#10243 = CARTESIAN_POINT('',(-0.556857572752,-6.97593923936E-02,+ 1.8000001));+#10244 = CARTESIAN_POINT('',(-0.546257582942,-8.308100120798E-02,+ 1.8000001));+#10245 = CARTESIAN_POINT('',(-0.527779222329,-8.308100120798E-02,+ 1.8000001));+#10246 = VECTOR('',#10247,1.);+#10247 = DIRECTION('',(0.,0.,1.));+#10248 = DEFINITIONAL_REPRESENTATION('',(#10249),#10253);+#10249 = LINE('',#10250,#10251);+#10250 = CARTESIAN_POINT('',(0.,-0.1));+#10251 = VECTOR('',#10252,1.);+#10252 = DIRECTION('',(1.,0.));+#10253 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10254 = ORIENTED_EDGE('',*,*,#10255,.T.);+#10255 = EDGE_CURVE('',#10226,#10256,#10258,.T.);+#10256 = VERTEX_POINT('',#10257);+#10257 = CARTESIAN_POINT('',(-0.498844115012,-7.040398636849E-02,+ 1.7000001));+#10258 = SURFACE_CURVE('',#10259,(#10263,#10270),.PCURVE_S1.);+#10259 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#10260,#10261,#10262),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#10260 = CARTESIAN_POINT('',(-0.527779222329,-8.308100120798E-02,+ 1.7000001));+#10261 = CARTESIAN_POINT('',(-0.508584646188,-8.308100120798E-02,+ 1.7000001));+#10262 = CARTESIAN_POINT('',(-0.498844115012,-7.040398636849E-02,+ 1.7000001));+#10263 = PCURVE('',#9728,#10264);+#10264 = DEFINITIONAL_REPRESENTATION('',(#10265),#10269);+#10265 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#10266,#10267,#10268),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#10266 = CARTESIAN_POINT('',(9.038639959006E-02,1.84783606135E-02));+#10267 = CARTESIAN_POINT('',(0.109580975731,1.84783606135E-02));+#10268 = CARTESIAN_POINT('',(0.119321506907,3.115537545299E-02));+#10269 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10270 = PCURVE('',#10271,#10278);+#10271 = SURFACE_OF_LINEAR_EXTRUSION('',#10272,#10276);+#10272 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#10273,#10274,#10275),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#10273 = CARTESIAN_POINT('',(-0.527779222329,-8.308100120798E-02,+ 1.8000001));+#10274 = CARTESIAN_POINT('',(-0.508584646188,-8.308100120798E-02,+ 1.8000001));+#10275 = CARTESIAN_POINT('',(-0.498844115012,-7.040398636849E-02,+ 1.8000001));+#10276 = VECTOR('',#10277,1.);+#10277 = DIRECTION('',(0.,0.,1.));+#10278 = DEFINITIONAL_REPRESENTATION('',(#10279),#10283);+#10279 = LINE('',#10280,#10281);+#10280 = CARTESIAN_POINT('',(0.,-0.1));+#10281 = VECTOR('',#10282,1.);+#10282 = DIRECTION('',(1.,0.));+#10283 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10284 = ORIENTED_EDGE('',*,*,#10285,.T.);+#10285 = EDGE_CURVE('',#10256,#10286,#10288,.T.);+#10286 = VERTEX_POINT('',#10287);+#10287 = CARTESIAN_POINT('',(-0.489103583836,-3.294591427213E-02,+ 1.7000001));+#10288 = SURFACE_CURVE('',#10289,(#10293,#10300),.PCURVE_S1.);+#10289 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#10290,#10291,#10292),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#10290 = CARTESIAN_POINT('',(-0.498844115012,-7.040398636849E-02,+ 1.7000001));+#10291 = CARTESIAN_POINT('',(-0.489103583836,-5.7726971529E-02,1.7000001+ ));+#10292 = CARTESIAN_POINT('',(-0.489103583836,-3.294591427213E-02,+ 1.7000001));+#10293 = PCURVE('',#9728,#10294);+#10294 = DEFINITIONAL_REPRESENTATION('',(#10295),#10299);+#10295 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#10296,#10297,#10298),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#10296 = CARTESIAN_POINT('',(0.119321506907,3.115537545299E-02));+#10297 = CARTESIAN_POINT('',(0.129062038083,4.383239029249E-02));+#10298 = CARTESIAN_POINT('',(0.129062038083,6.861344754935E-02));+#10299 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10300 = PCURVE('',#10301,#10308);+#10301 = SURFACE_OF_LINEAR_EXTRUSION('',#10302,#10306);+#10302 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#10303,#10304,#10305),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#10303 = CARTESIAN_POINT('',(-0.498844115012,-7.040398636849E-02,+ 1.8000001));+#10304 = CARTESIAN_POINT('',(-0.489103583836,-5.7726971529E-02,1.8000001+ ));+#10305 = CARTESIAN_POINT('',(-0.489103583836,-3.294591427213E-02,+ 1.8000001));+#10306 = VECTOR('',#10307,1.);+#10307 = DIRECTION('',(0.,0.,1.));+#10308 = DEFINITIONAL_REPRESENTATION('',(#10309),#10313);+#10309 = LINE('',#10310,#10311);+#10310 = CARTESIAN_POINT('',(0.,-0.1));+#10311 = VECTOR('',#10312,1.);+#10312 = DIRECTION('',(1.,0.));+#10313 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10314 = ORIENTED_EDGE('',*,*,#10315,.T.);+#10315 = EDGE_CURVE('',#10286,#10316,#10318,.T.);+#10316 = VERTEX_POINT('',#10317);+#10317 = CARTESIAN_POINT('',(-0.498844115012,4.583779376992E-03,+ 1.7000001));+#10318 = SURFACE_CURVE('',#10319,(#10323,#10330),.PCURVE_S1.);+#10319 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#10320,#10321,#10322),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#10320 = CARTESIAN_POINT('',(-0.489103583836,-3.294591427213E-02,+ 1.7000001));+#10321 = CARTESIAN_POINT('',(-0.489103583836,-8.021613909736E-03,+ 1.7000001));+#10322 = CARTESIAN_POINT('',(-0.498844115012,4.583779376992E-03,+ 1.7000001));+#10323 = PCURVE('',#9728,#10324);+#10324 = DEFINITIONAL_REPRESENTATION('',(#10325),#10329);+#10325 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#10326,#10327,#10328),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#10326 = CARTESIAN_POINT('',(0.129062038083,6.861344754935E-02));+#10327 = CARTESIAN_POINT('',(0.129062038083,9.353774791175E-02));+#10328 = CARTESIAN_POINT('',(0.119321506907,0.106143141198));+#10329 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10330 = PCURVE('',#10331,#10338);+#10331 = SURFACE_OF_LINEAR_EXTRUSION('',#10332,#10336);+#10332 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#10333,#10334,#10335),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#10333 = CARTESIAN_POINT('',(-0.489103583836,-3.294591427213E-02,+ 1.8000001));+#10334 = CARTESIAN_POINT('',(-0.489103583836,-8.021613909736E-03,+ 1.8000001));+#10335 = CARTESIAN_POINT('',(-0.498844115012,4.583779376992E-03,+ 1.8000001));+#10336 = VECTOR('',#10337,1.);+#10337 = DIRECTION('',(0.,0.,1.));+#10338 = DEFINITIONAL_REPRESENTATION('',(#10339),#10343);+#10339 = LINE('',#10340,#10341);+#10340 = CARTESIAN_POINT('',(0.,-0.1));+#10341 = VECTOR('',#10342,1.);+#10342 = DIRECTION('',(1.,0.));+#10343 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10344 = ORIENTED_EDGE('',*,*,#10345,.T.);+#10345 = EDGE_CURVE('',#10316,#10134,#10346,.T.);+#10346 = SURFACE_CURVE('',#10347,(#10351,#10358),.PCURVE_S1.);+#10347 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#10348,#10349,#10350),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#10348 = CARTESIAN_POINT('',(-0.498844115012,4.583779376992E-03,+ 1.7000001));+#10349 = CARTESIAN_POINT('',(-0.508584646188,1.718917266372E-02,+ 1.7000001));+#10350 = CARTESIAN_POINT('',(-0.527779222329,1.718917266372E-02,+ 1.7000001));+#10351 = PCURVE('',#9728,#10352);+#10352 = DEFINITIONAL_REPRESENTATION('',(#10353),#10357);+#10353 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#10354,#10355,#10356),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#10354 = CARTESIAN_POINT('',(0.119321506907,0.106143141198));+#10355 = CARTESIAN_POINT('',(0.109580975731,0.118748534485));+#10356 = CARTESIAN_POINT('',(9.038639959006E-02,0.118748534485));+#10357 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10358 = PCURVE('',#10359,#10366);+#10359 = SURFACE_OF_LINEAR_EXTRUSION('',#10360,#10364);+#10360 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#10361,#10362,#10363),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#10361 = CARTESIAN_POINT('',(-0.498844115012,4.583779376992E-03,+ 1.8000001));+#10362 = CARTESIAN_POINT('',(-0.508584646188,1.718917266372E-02,+ 1.8000001));+#10363 = CARTESIAN_POINT('',(-0.527779222329,1.718917266372E-02,+ 1.8000001));+#10364 = VECTOR('',#10365,1.);+#10365 = DIRECTION('',(0.,0.,1.));+#10366 = DEFINITIONAL_REPRESENTATION('',(#10367),#10371);+#10367 = LINE('',#10368,#10369);+#10368 = CARTESIAN_POINT('',(0.,-0.1));+#10369 = VECTOR('',#10370,1.);+#10370 = DIRECTION('',(1.,0.));+#10371 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10372 = ADVANCED_FACE('',(#10373),#10359,.T.);+#10373 = FACE_BOUND('',#10374,.T.);+#10374 = EDGE_LOOP('',(#10375,#10411,#10432,#10433));+#10375 = ORIENTED_EDGE('',*,*,#10376,.T.);+#10376 = EDGE_CURVE('',#10377,#10379,#10381,.T.);+#10377 = VERTEX_POINT('',#10378);+#10378 = CARTESIAN_POINT('',(-0.527779222329,1.718917266372E-02,1.75));+#10379 = VERTEX_POINT('',#10380);+#10380 = CARTESIAN_POINT('',(-0.498844115012,4.583779376992E-03,1.75));+#10381 = SURFACE_CURVE('',#10382,(#10388,#10397),.PCURVE_S1.);+#10382 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#10383,#10384,#10385,#10386,+ #10387),.UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),+ .PIECEWISE_BEZIER_KNOTS.);+#10383 = CARTESIAN_POINT('',(-0.527779222329,1.718917266372E-02,1.75));+#10384 = CARTESIAN_POINT('',(-0.518183826424,1.718917266372E-02,1.75));+#10385 = CARTESIAN_POINT('',(-0.510161164912,1.508910242333E-02,1.75));+#10386 = CARTESIAN_POINT('',(-0.503714535742,1.088667679231E-02,1.75));+#10387 = CARTESIAN_POINT('',(-0.498844115012,4.583779376992E-03,1.75));+#10388 = PCURVE('',#10359,#10389);+#10389 = DEFINITIONAL_REPRESENTATION('',(#10390),#10396);+#10390 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#10391,#10392,#10393,#10394,+ #10395),.UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),+ .PIECEWISE_BEZIER_KNOTS.);+#10391 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#10392 = CARTESIAN_POINT('',(0.750049289058,-5.00001E-02));+#10393 = CARTESIAN_POINT('',(0.500038189024,-5.00001E-02));+#10394 = CARTESIAN_POINT('',(0.250007963732,-5.00001E-02));+#10395 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#10396 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10397 = PCURVE('',#10398,#10403);+#10398 = PLANE('',#10399);+#10399 = AXIS2_PLACEMENT_3D('',#10400,#10401,#10402);+#10400 = CARTESIAN_POINT('',(-1.680085640382,2.260171280765,1.75));+#10401 = DIRECTION('',(0.,0.,-1.));+#10402 = DIRECTION('',(0.596575959062,-0.802556617983,0.));+#10403 = DEFINITIONAL_REPRESENTATION('',(#10404),#10410);+#10404 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#10405,#10406,#10407,#10408,+ #10409),.UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),+ .PIECEWISE_BEZIER_KNOTS.);+#10405 = CARTESIAN_POINT('',(2.487558441359,0.413318060547));+#10406 = CARTESIAN_POINT('',(2.493282823873,0.405617212061));+#10407 = CARTESIAN_POINT('',(2.499754376128,0.400431423389));+#10408 = CARTESIAN_POINT('',(2.50697296461,0.397764704586));+#10409 = CARTESIAN_POINT('',(2.514936972562,0.397616073267));+#10410 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10411 = ORIENTED_EDGE('',*,*,#10412,.T.);+#10412 = EDGE_CURVE('',#10379,#10316,#10413,.T.);+#10413 = SURFACE_CURVE('',#10414,(#10418,#10425),.PCURVE_S1.);+#10414 = LINE('',#10415,#10416);+#10415 = CARTESIAN_POINT('',(-0.498844115012,4.583779376992E-03,+ 1.8000001));+#10416 = VECTOR('',#10417,1.);+#10417 = DIRECTION('',(-0.,-0.,-1.));+#10418 = PCURVE('',#10359,#10419);+#10419 = DEFINITIONAL_REPRESENTATION('',(#10420),#10424);+#10420 = LINE('',#10421,#10422);+#10421 = CARTESIAN_POINT('',(0.,0.));+#10422 = VECTOR('',#10423,1.);+#10423 = DIRECTION('',(0.,-1.));+#10424 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10425 = PCURVE('',#10331,#10426);+#10426 = DEFINITIONAL_REPRESENTATION('',(#10427),#10431);+#10427 = LINE('',#10428,#10429);+#10428 = CARTESIAN_POINT('',(1.,0.));+#10429 = VECTOR('',#10430,1.);+#10430 = DIRECTION('',(0.,-1.));+#10431 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10432 = ORIENTED_EDGE('',*,*,#10345,.T.);+#10433 = ORIENTED_EDGE('',*,*,#10434,.F.);+#10434 = EDGE_CURVE('',#10377,#10134,#10435,.T.);+#10435 = SURFACE_CURVE('',#10436,(#10440,#10447),.PCURVE_S1.);+#10436 = LINE('',#10437,#10438);+#10437 = CARTESIAN_POINT('',(-0.527779222329,1.718917266372E-02,+ 1.8000001));+#10438 = VECTOR('',#10439,1.);+#10439 = DIRECTION('',(-0.,-0.,-1.));+#10440 = PCURVE('',#10359,#10441);+#10441 = DEFINITIONAL_REPRESENTATION('',(#10442),#10446);+#10442 = LINE('',#10443,#10444);+#10443 = CARTESIAN_POINT('',(1.,0.));+#10444 = VECTOR('',#10445,1.);+#10445 = DIRECTION('',(0.,-1.));+#10446 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10447 = PCURVE('',#10151,#10448);+#10448 = DEFINITIONAL_REPRESENTATION('',(#10449),#10453);+#10449 = LINE('',#10450,#10451);+#10450 = CARTESIAN_POINT('',(0.,0.));+#10451 = VECTOR('',#10452,1.);+#10452 = DIRECTION('',(0.,-1.));+#10453 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10454 = ADVANCED_FACE('',(#10455),#10398,.F.);+#10455 = FACE_BOUND('',#10456,.F.);+#10456 = EDGE_LOOP('',(#10457,#10488,#10524,#10525,#10554,#10583,#10621,+ #10650));+#10457 = ORIENTED_EDGE('',*,*,#10458,.T.);+#10458 = EDGE_CURVE('',#10459,#10461,#10463,.T.);+#10459 = VERTEX_POINT('',#10460);+#10460 = CARTESIAN_POINT('',(-0.567457562561,-3.294591427213E-02,1.75));+#10461 = VERTEX_POINT('',#10462);+#10462 = CARTESIAN_POINT('',(-0.556857572752,3.867563849337E-03,1.75));+#10463 = SURFACE_CURVE('',#10464,(#10470,#10479),.PCURVE_S1.);+#10464 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#10465,#10466,#10467,#10468,+ #10469),.UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),+ .PIECEWISE_BEZIER_KNOTS.);+#10465 = CARTESIAN_POINT('',(-0.567457562561,-3.294591427213E-02,1.75));+#10466 = CARTESIAN_POINT('',(-0.567457562561,-2.120389468225E-02,1.75));+#10467 = CARTESIAN_POINT('',(-0.565692075607,-1.115205675392E-02,1.75));+#10468 = CARTESIAN_POINT('',(-0.562158573882,-2.794505139044E-03,1.75));+#10469 = CARTESIAN_POINT('',(-0.556857572752,3.867563849337E-03,1.75));+#10470 = PCURVE('',#10398,#10471);+#10471 = DEFINITIONAL_REPRESENTATION('',(#10472),#10478);+#10472 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#10473,#10474,#10475,#10476,+ #10477),.UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),+ .PIECEWISE_BEZIER_KNOTS.);+#10473 = CARTESIAN_POINT('',(2.504123543294,0.475071562662));+#10474 = CARTESIAN_POINT('',(2.494699907764,0.468066556064));+#10475 = CARTESIAN_POINT('',(2.487685985784,0.460652967973));+#10476 = CARTESIAN_POINT('',(2.483086579606,0.452831218409));+#10477 = CARTESIAN_POINT('',(2.480902341883,0.444602434673));+#10478 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10479 = PCURVE('',#10181,#10480);+#10480 = DEFINITIONAL_REPRESENTATION('',(#10481),#10487);+#10481 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#10482,#10483,#10484,#10485,+ #10486),.UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),+ .PIECEWISE_BEZIER_KNOTS.);+#10482 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#10483 = CARTESIAN_POINT('',(0.750083328057,-5.00001E-02));+#10484 = CARTESIAN_POINT('',(0.500087235089,-5.00001E-02));+#10485 = CARTESIAN_POINT('',(0.250047463531,-5.00001E-02));+#10486 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#10487 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10488 = ORIENTED_EDGE('',*,*,#10489,.T.);+#10489 = EDGE_CURVE('',#10461,#10377,#10490,.T.);+#10490 = SURFACE_CURVE('',#10491,(#10500,#10512),.PCURVE_S1.);+#10491 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#10492,#10493,#10494,#10495,+ #10496,#10497,#10498,#10499),.UNSPECIFIED.,.F.,.F.,(5,3,5),(0.,+ 0.391991815933,1.),.UNSPECIFIED.);+#10492 = CARTESIAN_POINT('',(-0.556857572752,3.867563849337E-03,1.75));+#10493 = CARTESIAN_POINT('',(-0.55478007669,6.478471062136E-03,1.75));+#10494 = CARTESIAN_POINT('',(-0.552500728202,8.748364536318E-03,1.75));+#10495 = CARTESIAN_POINT('',(-0.550019533645,1.067710499799E-02,1.75));+#10496 = CARTESIAN_POINT('',(-0.543175067088,1.472705808488E-02,1.75));+#10497 = CARTESIAN_POINT('',(-0.538528126308,1.636861292238E-02,1.75));+#10498 = CARTESIAN_POINT('',(-0.533395981993,1.718917266372E-02,1.75));+#10499 = CARTESIAN_POINT('',(-0.527779222329,1.718917266372E-02,1.75));+#10500 = PCURVE('',#10398,#10501);+#10501 = DEFINITIONAL_REPRESENTATION('',(#10502),#10511);+#10502 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#10503,#10504,#10505,#10506,+ #10507,#10508,#10509,#10510),.UNSPECIFIED.,.F.,.F.,(5,3,5),(0.,+ 0.391991815933,1.),.UNSPECIFIED.);+#10503 = CARTESIAN_POINT('',(2.480902341883,0.444602434673));+#10504 = CARTESIAN_POINT('',(2.480046325226,0.441377521986));+#10505 = CARTESIAN_POINT('',(2.479584411707,0.438194051896));+#10506 = CARTESIAN_POINT('',(2.479516709307,0.435052112592));+#10507 = CARTESIAN_POINT('',(2.480349636855,0.427142936014));+#10508 = CARTESIAN_POINT('',(2.481804449309,0.422434190786));+#10509 = CARTESIAN_POINT('',(2.484207617575,0.417825828187));+#10510 = CARTESIAN_POINT('',(2.487558441359,0.413318060547));+#10511 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10512 = PCURVE('',#10151,#10513);+#10513 = DEFINITIONAL_REPRESENTATION('',(#10514),#10523);+#10514 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#10515,#10516,#10517,#10518,+ #10519,#10520,#10521,#10522),.UNSPECIFIED.,.F.,.F.,(5,3,5),(0.,+ 0.391991815933,1.),.UNSPECIFIED.);+#10515 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#10516 = CARTESIAN_POINT('',(0.902004808534,-5.00001E-02));+#10517 = CARTESIAN_POINT('',(0.804004810517,-5.00001E-02));+#10518 = CARTESIAN_POINT('',(0.706002406667,-5.00001E-02));+#10519 = CARTESIAN_POINT('',(0.455991047543,-5.00001E-02));+#10520 = CARTESIAN_POINT('',(0.303982086962,-5.00001E-02));+#10521 = CARTESIAN_POINT('',(0.15198208816,-5.00001E-02));+#10522 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#10523 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10524 = ORIENTED_EDGE('',*,*,#10376,.T.);+#10525 = ORIENTED_EDGE('',*,*,#10526,.T.);+#10526 = EDGE_CURVE('',#10379,#10527,#10529,.T.);+#10527 = VERTEX_POINT('',#10528);+#10528 = CARTESIAN_POINT('',(-0.489103583836,-3.294591427213E-02,1.75));+#10529 = SURFACE_CURVE('',#10530,(#10536,#10545),.PCURVE_S1.);+#10530 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#10531,#10532,#10533,#10534,+ #10535),.UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),+ .PIECEWISE_BEZIER_KNOTS.);+#10531 = CARTESIAN_POINT('',(-0.498844115012,4.583779376992E-03,1.75));+#10532 = CARTESIAN_POINT('',(-0.493972462014,-1.720712737915E-03,1.75));+#10533 = CARTESIAN_POINT('',(-0.4907255485,-1.007901979598E-02,1.75));+#10534 = CARTESIAN_POINT('',(-0.489103583836,-2.048935555008E-02,1.75));+#10535 = CARTESIAN_POINT('',(-0.489103583836,-3.294591427213E-02,1.75));+#10536 = PCURVE('',#10398,#10537);+#10537 = DEFINITIONAL_REPRESENTATION('',(#10538),#10544);+#10538 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#10539,#10540,#10541,#10542,+ #10543),.UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),+ .PIECEWISE_BEZIER_KNOTS.);+#10539 = CARTESIAN_POINT('',(2.514936972562,0.397616073267));+#10540 = CARTESIAN_POINT('',(2.522902995491,0.397467404343));+#10541 = CARTESIAN_POINT('',(2.531548040679,0.399847937464));+#10542 = CARTESIAN_POINT('',(2.540870549659,0.404756775025));+#10543 = CARTESIAN_POINT('',(2.550867643299,0.412188058491));+#10544 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10545 = PCURVE('',#10331,#10546);+#10546 = DEFINITIONAL_REPRESENTATION('',(#10547),#10553);+#10547 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#10548,#10549,#10550,#10551,+ #10552),.UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),+ .PIECEWISE_BEZIER_KNOTS.);+#10548 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#10549 = CARTESIAN_POINT('',(0.749928781613,-5.00001E-02));+#10550 = CARTESIAN_POINT('',(0.499877676935,-5.00001E-02));+#10551 = CARTESIAN_POINT('',(0.249887831172,-5.00001E-02));+#10552 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#10553 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10554 = ORIENTED_EDGE('',*,*,#10555,.T.);+#10555 = EDGE_CURVE('',#10527,#10556,#10558,.T.);+#10556 = VERTEX_POINT('',#10557);+#10557 = CARTESIAN_POINT('',(-0.498844115012,-7.040398636849E-02,1.75));+#10558 = SURFACE_CURVE('',#10559,(#10565,#10574),.PCURVE_S1.);+#10559 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#10560,#10561,#10562,#10563,+ #10564),.UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),+ .PIECEWISE_BEZIER_KNOTS.);+#10560 = CARTESIAN_POINT('',(-0.489103583836,-3.294591427213E-02,1.75));+#10561 = CARTESIAN_POINT('',(-0.489103583836,-4.533101550185E-02,1.75));+#10562 = CARTESIAN_POINT('',(-0.490725583089,-5.570548367964E-02,1.75));+#10563 = CARTESIAN_POINT('',(-0.493972496948,-6.406371874093E-02,1.75));+#10564 = CARTESIAN_POINT('',(-0.498844115012,-7.040398636849E-02,1.75));+#10565 = PCURVE('',#10398,#10566);+#10566 = DEFINITIONAL_REPRESENTATION('',(#10567),#10573);+#10567 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#10568,#10569,#10570,#10571,+ #10572),.UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),+ .PIECEWISE_BEZIER_KNOTS.);+#10568 = CARTESIAN_POINT('',(2.550867643299,0.412188058491));+#10569 = CARTESIAN_POINT('',(2.560807388255,0.419576712135));+#10570 = CARTESIAN_POINT('',(2.568165840589,0.427067616673));+#10571 = CARTESIAN_POINT('',(2.572936766703,0.434659770976));+#10572 = CARTESIAN_POINT('',(2.575118900228,0.442351971534));+#10573 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10574 = PCURVE('',#10301,#10575);+#10575 = DEFINITIONAL_REPRESENTATION('',(#10576),#10582);+#10576 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#10577,#10578,#10579,#10580,+ #10581),.UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),+ .PIECEWISE_BEZIER_KNOTS.);+#10577 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#10578 = CARTESIAN_POINT('',(0.750109507005,-5.00001E-02));+#10579 = CARTESIAN_POINT('',(0.500119350195,-5.00001E-02));+#10580 = CARTESIAN_POINT('',(0.25006942517,-5.00001E-02));+#10581 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#10582 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10583 = ORIENTED_EDGE('',*,*,#10584,.T.);+#10584 = EDGE_CURVE('',#10556,#10585,#10587,.T.);+#10585 = VERTEX_POINT('',#10586);+#10586 = CARTESIAN_POINT('',(-0.527779222329,-8.308100120798E-02,1.75));+#10587 = SURFACE_CURVE('',#10588,(#10597,#10609),.PCURVE_S1.);+#10588 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#10589,#10590,#10591,#10592,+ #10593,#10594,#10595,#10596),.UNSPECIFIED.,.F.,.F.,(5,3,5),(0.,+ 0.271985198507,1.),.UNSPECIFIED.);+#10589 = CARTESIAN_POINT('',(-0.498844115012,-7.040398636849E-02,1.75));+#10590 = CARTESIAN_POINT('',(-0.500168794175,-7.212801733843E-02,1.75));+#10591 = CARTESIAN_POINT('',(-0.501610075126,-7.369578293006E-02,1.75));+#10592 = CARTESIAN_POINT('',(-0.503167954586,-7.510724441656E-02,1.75));+#10593 = CARTESIAN_POINT('',(-0.50932438316,-7.972198729822E-02,1.75));+#10594 = CARTESIAN_POINT('',(-0.514641585089,-8.196162539916E-02,1.75));+#10595 = CARTESIAN_POINT('',(-0.52079362361,-8.308100120798E-02,1.75));+#10596 = CARTESIAN_POINT('',(-0.527779222329,-8.308100120798E-02,1.75));+#10597 = PCURVE('',#10398,#10598);+#10598 = DEFINITIONAL_REPRESENTATION('',(#10599),#10608);+#10599 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#10600,#10601,#10602,#10603,+ #10604,#10605,#10606,#10607),.UNSPECIFIED.,.F.,.F.,(5,3,5),(0.,+ 0.271985198507,1.),.UNSPECIFIED.);+#10600 = CARTESIAN_POINT('',(2.575118900228,0.442351971534));+#10601 = CARTESIAN_POINT('',(2.575712260951,0.444443616993));+#10602 = CARTESIAN_POINT('',(2.576110648036,0.44653561782));+#10603 = CARTESIAN_POINT('',(2.57631403236,0.448627948281));+#10604 = CARTESIAN_POINT('',(2.576344847519,0.456321875436));+#10605 = CARTESIAN_POINT('',(2.574970169059,0.461925345281));+#10606 = CARTESIAN_POINT('',(2.572198373241,0.467530497207));+#10607 = CARTESIAN_POINT('',(2.568030932986,0.47313683569));+#10608 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10609 = PCURVE('',#10271,#10610);+#10610 = DEFINITIONAL_REPRESENTATION('',(#10611),#10620);+#10611 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#10612,#10613,#10614,#10615,+ #10616,#10617,#10618,#10619),.UNSPECIFIED.,.F.,.F.,(5,3,5),(0.,+ 0.271985198507,1.),.UNSPECIFIED.);+#10612 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#10613 = CARTESIAN_POINT('',(0.932001697885,-5.00001E-02));+#10614 = CARTESIAN_POINT('',(0.864001705319,-5.00001E-02));+#10615 = CARTESIAN_POINT('',(0.796000859992,-5.00001E-02));+#10616 = CARTESIAN_POINT('',(0.545984093031,-5.00001E-02));+#10617 = CARTESIAN_POINT('',(0.363968078175,-5.00001E-02));+#10618 = CARTESIAN_POINT('',(0.18196803794,-5.00001E-02));+#10619 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#10620 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10621 = ORIENTED_EDGE('',*,*,#10622,.T.);+#10622 = EDGE_CURVE('',#10585,#10623,#10625,.T.);+#10623 = VERTEX_POINT('',#10624);+#10624 = CARTESIAN_POINT('',(-0.556857572752,-6.97593923936E-02,1.75));+#10625 = SURFACE_CURVE('',#10626,(#10632,#10641),.PCURVE_S1.);+#10626 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#10627,#10628,#10629,#10630,+ #10631),.UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),+ .PIECEWISE_BEZIER_KNOTS.);+#10627 = CARTESIAN_POINT('',(-0.527779222329,-8.308100120798E-02,1.75));+#10628 = CARTESIAN_POINT('',(-0.537017189462,-8.308100120798E-02,1.75));+#10629 = CARTESIAN_POINT('',(-0.544944230601,-8.086131626146E-02,1.75));+#10630 = CARTESIAN_POINT('',(-0.551557727292,-7.642000898505E-02,1.75));+#10631 = CARTESIAN_POINT('',(-0.556857572752,-6.97593923936E-02,1.75));+#10632 = PCURVE('',#10398,#10633);+#10633 = DEFINITIONAL_REPRESENTATION('',(#10634),#10640);+#10634 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#10635,#10636,#10637,#10638,+ #10639),.UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),+ .PIECEWISE_BEZIER_KNOTS.);+#10635 = CARTESIAN_POINT('',(2.568030932986,0.47313683569));+#10636 = CARTESIAN_POINT('',(2.562519783884,0.480550827349));+#10637 = CARTESIAN_POINT('',(2.55600927887,0.485588516));+#10638 = CARTESIAN_POINT('',(2.548499425191,0.48824664439));+#10639 = CARTESIAN_POINT('',(2.539992142878,0.488526506707));+#10640 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10641 = PCURVE('',#10241,#10642);+#10642 = DEFINITIONAL_REPRESENTATION('',(#10643),#10649);+#10643 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#10644,#10645,#10646,#10647,+ #10648),.UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),+ .PIECEWISE_BEZIER_KNOTS.);+#10644 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#10645 = CARTESIAN_POINT('',(0.750032826884,-5.00001E-02));+#10646 = CARTESIAN_POINT('',(0.500017194109,-5.00001E-02));+#10647 = CARTESIAN_POINT('',(0.249992950711,-5.00001E-02));+#10648 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#10649 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10650 = ORIENTED_EDGE('',*,*,#10651,.T.);+#10651 = EDGE_CURVE('',#10623,#10459,#10652,.T.);+#10652 = SURFACE_CURVE('',#10653,(#10659,#10668),.PCURVE_S1.);+#10653 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#10654,#10655,#10656,#10657,+ #10658),.UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),+ .PIECEWISE_BEZIER_KNOTS.);+#10654 = CARTESIAN_POINT('',(-0.556857572752,-6.97593923936E-02,1.75));+#10655 = CARTESIAN_POINT('',(-0.562158573883,-6.309732340475E-02,1.75));+#10656 = CARTESIAN_POINT('',(-0.565692075607,-5.473977179123E-02,1.75));+#10657 = CARTESIAN_POINT('',(-0.567457562561,-4.468793386099E-02,1.75));+#10658 = CARTESIAN_POINT('',(-0.567457562561,-3.294591427213E-02,1.75));+#10659 = PCURVE('',#10398,#10660);+#10660 = DEFINITIONAL_REPRESENTATION('',(#10661),#10667);+#10661 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#10662,#10663,#10664,#10665,+ #10666),.UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),+ .PIECEWISE_BEZIER_KNOTS.);+#10662 = CARTESIAN_POINT('',(2.539992142878,0.488526506707));+#10663 = CARTESIAN_POINT('',(2.531483005488,0.48880643005));+#10664 = CARTESIAN_POINT('',(2.52266759495,0.486656350875));+#10665 = CARTESIAN_POINT('',(2.513547178824,0.48207656926));+#10666 = CARTESIAN_POINT('',(2.504123543294,0.475071562662));+#10667 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10668 = PCURVE('',#10211,#10669);+#10669 = DEFINITIONAL_REPRESENTATION('',(#10670),#10676);+#10670 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#10671,#10672,#10673,#10674,+ #10675),.UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),+ .PIECEWISE_BEZIER_KNOTS.);+#10671 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#10672 = CARTESIAN_POINT('',(0.749952536451,-5.00001E-02));+#10673 = CARTESIAN_POINT('',(0.499912764928,-5.00001E-02));+#10674 = CARTESIAN_POINT('',(0.249916671921,-5.00001E-02));+#10675 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#10676 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10677 = ADVANCED_FACE('',(#10678),#10331,.T.);+#10678 = FACE_BOUND('',#10679,.T.);+#10679 = EDGE_LOOP('',(#10680,#10681,#10702,#10703));+#10680 = ORIENTED_EDGE('',*,*,#10526,.T.);+#10681 = ORIENTED_EDGE('',*,*,#10682,.T.);+#10682 = EDGE_CURVE('',#10527,#10286,#10683,.T.);+#10683 = SURFACE_CURVE('',#10684,(#10688,#10695),.PCURVE_S1.);+#10684 = LINE('',#10685,#10686);+#10685 = CARTESIAN_POINT('',(-0.489103583836,-3.294591427213E-02,+ 1.8000001));+#10686 = VECTOR('',#10687,1.);+#10687 = DIRECTION('',(-0.,-0.,-1.));+#10688 = PCURVE('',#10331,#10689);+#10689 = DEFINITIONAL_REPRESENTATION('',(#10690),#10694);+#10690 = LINE('',#10691,#10692);+#10691 = CARTESIAN_POINT('',(0.,0.));+#10692 = VECTOR('',#10693,1.);+#10693 = DIRECTION('',(0.,-1.));+#10694 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10695 = PCURVE('',#10301,#10696);+#10696 = DEFINITIONAL_REPRESENTATION('',(#10697),#10701);+#10697 = LINE('',#10698,#10699);+#10698 = CARTESIAN_POINT('',(1.,0.));+#10699 = VECTOR('',#10700,1.);+#10700 = DIRECTION('',(0.,-1.));+#10701 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10702 = ORIENTED_EDGE('',*,*,#10315,.T.);+#10703 = ORIENTED_EDGE('',*,*,#10412,.F.);+#10704 = ADVANCED_FACE('',(#10705),#10301,.T.);+#10705 = FACE_BOUND('',#10706,.T.);+#10706 = EDGE_LOOP('',(#10707,#10708,#10729,#10730));+#10707 = ORIENTED_EDGE('',*,*,#10555,.T.);+#10708 = ORIENTED_EDGE('',*,*,#10709,.T.);+#10709 = EDGE_CURVE('',#10556,#10256,#10710,.T.);+#10710 = SURFACE_CURVE('',#10711,(#10715,#10722),.PCURVE_S1.);+#10711 = LINE('',#10712,#10713);+#10712 = CARTESIAN_POINT('',(-0.498844115012,-7.040398636849E-02,+ 1.8000001));+#10713 = VECTOR('',#10714,1.);+#10714 = DIRECTION('',(-0.,-0.,-1.));+#10715 = PCURVE('',#10301,#10716);+#10716 = DEFINITIONAL_REPRESENTATION('',(#10717),#10721);+#10717 = LINE('',#10718,#10719);+#10718 = CARTESIAN_POINT('',(0.,0.));+#10719 = VECTOR('',#10720,1.);+#10720 = DIRECTION('',(0.,-1.));+#10721 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10722 = PCURVE('',#10271,#10723);+#10723 = DEFINITIONAL_REPRESENTATION('',(#10724),#10728);+#10724 = LINE('',#10725,#10726);+#10725 = CARTESIAN_POINT('',(1.,0.));+#10726 = VECTOR('',#10727,1.);+#10727 = DIRECTION('',(0.,-1.));+#10728 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10729 = ORIENTED_EDGE('',*,*,#10285,.T.);+#10730 = ORIENTED_EDGE('',*,*,#10682,.F.);+#10731 = ADVANCED_FACE('',(#10732),#10271,.T.);+#10732 = FACE_BOUND('',#10733,.T.);+#10733 = EDGE_LOOP('',(#10734,#10735,#10756,#10757));+#10734 = ORIENTED_EDGE('',*,*,#10584,.T.);+#10735 = ORIENTED_EDGE('',*,*,#10736,.T.);+#10736 = EDGE_CURVE('',#10585,#10226,#10737,.T.);+#10737 = SURFACE_CURVE('',#10738,(#10742,#10749),.PCURVE_S1.);+#10738 = LINE('',#10739,#10740);+#10739 = CARTESIAN_POINT('',(-0.527779222329,-8.308100120798E-02,+ 1.8000001));+#10740 = VECTOR('',#10741,1.);+#10741 = DIRECTION('',(-0.,-0.,-1.));+#10742 = PCURVE('',#10271,#10743);+#10743 = DEFINITIONAL_REPRESENTATION('',(#10744),#10748);+#10744 = LINE('',#10745,#10746);+#10745 = CARTESIAN_POINT('',(0.,0.));+#10746 = VECTOR('',#10747,1.);+#10747 = DIRECTION('',(0.,-1.));+#10748 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10749 = PCURVE('',#10241,#10750);+#10750 = DEFINITIONAL_REPRESENTATION('',(#10751),#10755);+#10751 = LINE('',#10752,#10753);+#10752 = CARTESIAN_POINT('',(1.,0.));+#10753 = VECTOR('',#10754,1.);+#10754 = DIRECTION('',(0.,-1.));+#10755 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10756 = ORIENTED_EDGE('',*,*,#10255,.T.);+#10757 = ORIENTED_EDGE('',*,*,#10709,.F.);+#10758 = ADVANCED_FACE('',(#10759),#10241,.T.);+#10759 = FACE_BOUND('',#10760,.T.);+#10760 = EDGE_LOOP('',(#10761,#10762,#10783,#10784));+#10761 = ORIENTED_EDGE('',*,*,#10622,.T.);+#10762 = ORIENTED_EDGE('',*,*,#10763,.T.);+#10763 = EDGE_CURVE('',#10623,#10196,#10764,.T.);+#10764 = SURFACE_CURVE('',#10765,(#10769,#10776),.PCURVE_S1.);+#10765 = LINE('',#10766,#10767);+#10766 = CARTESIAN_POINT('',(-0.556857572752,-6.97593923936E-02,+ 1.8000001));+#10767 = VECTOR('',#10768,1.);+#10768 = DIRECTION('',(-0.,-0.,-1.));+#10769 = PCURVE('',#10241,#10770);+#10770 = DEFINITIONAL_REPRESENTATION('',(#10771),#10775);+#10771 = LINE('',#10772,#10773);+#10772 = CARTESIAN_POINT('',(0.,0.));+#10773 = VECTOR('',#10774,1.);+#10774 = DIRECTION('',(0.,-1.));+#10775 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10776 = PCURVE('',#10211,#10777);+#10777 = DEFINITIONAL_REPRESENTATION('',(#10778),#10782);+#10778 = LINE('',#10779,#10780);+#10779 = CARTESIAN_POINT('',(1.,0.));+#10780 = VECTOR('',#10781,1.);+#10781 = DIRECTION('',(0.,-1.));+#10782 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10783 = ORIENTED_EDGE('',*,*,#10225,.T.);+#10784 = ORIENTED_EDGE('',*,*,#10736,.F.);+#10785 = ADVANCED_FACE('',(#10786),#10211,.T.);+#10786 = FACE_BOUND('',#10787,.T.);+#10787 = EDGE_LOOP('',(#10788,#10789,#10810,#10811));+#10788 = ORIENTED_EDGE('',*,*,#10651,.T.);+#10789 = ORIENTED_EDGE('',*,*,#10790,.T.);+#10790 = EDGE_CURVE('',#10459,#10166,#10791,.T.);+#10791 = SURFACE_CURVE('',#10792,(#10796,#10803),.PCURVE_S1.);+#10792 = LINE('',#10793,#10794);+#10793 = CARTESIAN_POINT('',(-0.567457562561,-3.294591427213E-02,+ 1.8000001));+#10794 = VECTOR('',#10795,1.);+#10795 = DIRECTION('',(-0.,-0.,-1.));+#10796 = PCURVE('',#10211,#10797);+#10797 = DEFINITIONAL_REPRESENTATION('',(#10798),#10802);+#10798 = LINE('',#10799,#10800);+#10799 = CARTESIAN_POINT('',(0.,0.));+#10800 = VECTOR('',#10801,1.);+#10801 = DIRECTION('',(0.,-1.));+#10802 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10803 = PCURVE('',#10181,#10804);+#10804 = DEFINITIONAL_REPRESENTATION('',(#10805),#10809);+#10805 = LINE('',#10806,#10807);+#10806 = CARTESIAN_POINT('',(1.,0.));+#10807 = VECTOR('',#10808,1.);+#10808 = DIRECTION('',(0.,-1.));+#10809 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10810 = ORIENTED_EDGE('',*,*,#10195,.T.);+#10811 = ORIENTED_EDGE('',*,*,#10763,.F.);+#10812 = ADVANCED_FACE('',(#10813),#10181,.T.);+#10813 = FACE_BOUND('',#10814,.T.);+#10814 = EDGE_LOOP('',(#10815,#10816,#10837,#10838));+#10815 = ORIENTED_EDGE('',*,*,#10458,.T.);+#10816 = ORIENTED_EDGE('',*,*,#10817,.T.);+#10817 = EDGE_CURVE('',#10461,#10136,#10818,.T.);+#10818 = SURFACE_CURVE('',#10819,(#10823,#10830),.PCURVE_S1.);+#10819 = LINE('',#10820,#10821);+#10820 = CARTESIAN_POINT('',(-0.556857572752,3.867563849337E-03,+ 1.8000001));+#10821 = VECTOR('',#10822,1.);+#10822 = DIRECTION('',(-0.,-0.,-1.));+#10823 = PCURVE('',#10181,#10824);+#10824 = DEFINITIONAL_REPRESENTATION('',(#10825),#10829);+#10825 = LINE('',#10826,#10827);+#10826 = CARTESIAN_POINT('',(0.,0.));+#10827 = VECTOR('',#10828,1.);+#10828 = DIRECTION('',(0.,-1.));+#10829 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10830 = PCURVE('',#10151,#10831);+#10831 = DEFINITIONAL_REPRESENTATION('',(#10832),#10836);+#10832 = LINE('',#10833,#10834);+#10833 = CARTESIAN_POINT('',(1.,0.));+#10834 = VECTOR('',#10835,1.);+#10835 = DIRECTION('',(0.,-1.));+#10836 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10837 = ORIENTED_EDGE('',*,*,#10165,.T.);+#10838 = ORIENTED_EDGE('',*,*,#10790,.F.);+#10839 = ADVANCED_FACE('',(#10840),#10151,.T.);+#10840 = FACE_BOUND('',#10841,.T.);+#10841 = EDGE_LOOP('',(#10842,#10843,#10844,#10845));+#10842 = ORIENTED_EDGE('',*,*,#10489,.T.);+#10843 = ORIENTED_EDGE('',*,*,#10434,.T.);+#10844 = ORIENTED_EDGE('',*,*,#10133,.T.);+#10845 = ORIENTED_EDGE('',*,*,#10817,.F.);+#10846 = ADVANCED_FACE('',(#10847),#6443,.T.);+#10847 = FACE_BOUND('',#10848,.T.);+#10848 = EDGE_LOOP('',(#10849,#10850,#10851,#10852));+#10849 = ORIENTED_EDGE('',*,*,#6417,.T.);+#10850 = ORIENTED_EDGE('',*,*,#9740,.T.);+#10851 = ORIENTED_EDGE('',*,*,#9811,.T.);+#10852 = ORIENTED_EDGE('',*,*,#10853,.F.);+#10853 = EDGE_CURVE('',#6382,#9812,#10854,.T.);+#10854 = SURFACE_CURVE('',#10855,(#10859,#10866),.PCURVE_S1.);+#10855 = LINE('',#10856,#10857);+#10856 = CARTESIAN_POINT('',(-0.558290003807,7.112020189614E-02,+ 1.8000001));+#10857 = VECTOR('',#10858,1.);+#10858 = DIRECTION('',(-0.,-0.,-1.));+#10859 = PCURVE('',#6443,#10860);+#10860 = DEFINITIONAL_REPRESENTATION('',(#10861),#10865);+#10861 = LINE('',#10862,#10863);+#10862 = CARTESIAN_POINT('',(1.,0.));+#10863 = VECTOR('',#10864,1.);+#10864 = DIRECTION('',(0.,-1.));+#10865 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10866 = PCURVE('',#6401,#10867);+#10867 = DEFINITIONAL_REPRESENTATION('',(#10868),#10872);+#10868 = LINE('',#10869,#10870);+#10869 = CARTESIAN_POINT('',(0.,0.));+#10870 = VECTOR('',#10871,1.);+#10871 = DIRECTION('',(0.,-1.));+#10872 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10873 = ADVANCED_FACE('',(#10874),#6401,.T.);+#10874 = FACE_BOUND('',#10875,.T.);+#10875 = EDGE_LOOP('',(#10876,#10877,#10878,#10879));+#10876 = ORIENTED_EDGE('',*,*,#6381,.T.);+#10877 = ORIENTED_EDGE('',*,*,#10853,.T.);+#10878 = ORIENTED_EDGE('',*,*,#9834,.T.);+#10879 = ORIENTED_EDGE('',*,*,#10880,.F.);+#10880 = EDGE_CURVE('',#6346,#9835,#10881,.T.);+#10881 = SURFACE_CURVE('',#10882,(#10886,#10893),.PCURVE_S1.);+#10882 = LINE('',#10883,#10884);+#10883 = CARTESIAN_POINT('',(-0.572471071255,1.01702604927E-02,1.8000001+ ));+#10884 = VECTOR('',#10885,1.);+#10885 = DIRECTION('',(-0.,-0.,-1.));+#10886 = PCURVE('',#6401,#10887);+#10887 = DEFINITIONAL_REPRESENTATION('',(#10888),#10892);+#10888 = LINE('',#10889,#10890);+#10889 = CARTESIAN_POINT('',(1.,0.));+#10890 = VECTOR('',#10891,1.);+#10891 = DIRECTION('',(0.,-1.));+#10892 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10893 = PCURVE('',#6365,#10894);+#10894 = DEFINITIONAL_REPRESENTATION('',(#10895),#10899);+#10895 = LINE('',#10896,#10897);+#10896 = CARTESIAN_POINT('',(0.,0.));+#10897 = VECTOR('',#10898,1.);+#10898 = DIRECTION('',(0.,-1.));+#10899 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10900 = ADVANCED_FACE('',(#10901),#6365,.T.);+#10901 = FACE_BOUND('',#10902,.T.);+#10902 = EDGE_LOOP('',(#10903,#10904,#10905,#10906));+#10903 = ORIENTED_EDGE('',*,*,#6345,.T.);+#10904 = ORIENTED_EDGE('',*,*,#10880,.T.);+#10905 = ORIENTED_EDGE('',*,*,#9857,.T.);+#10906 = ORIENTED_EDGE('',*,*,#10907,.F.);+#10907 = EDGE_CURVE('',#6310,#9858,#10908,.T.);+#10908 = SURFACE_CURVE('',#10909,(#10913,#10920),.PCURVE_S1.);+#10909 = LINE('',#10910,#10911);+#10910 = CARTESIAN_POINT('',(-0.553419738219,3.215807719171E-02,+ 1.8000001));+#10911 = VECTOR('',#10912,1.);+#10912 = DIRECTION('',(-0.,-0.,-1.));+#10913 = PCURVE('',#6365,#10914);+#10914 = DEFINITIONAL_REPRESENTATION('',(#10915),#10919);+#10915 = LINE('',#10916,#10917);+#10916 = CARTESIAN_POINT('',(1.,0.));+#10917 = VECTOR('',#10918,1.);+#10918 = DIRECTION('',(0.,-1.));+#10919 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10920 = PCURVE('',#6329,#10921);+#10921 = DEFINITIONAL_REPRESENTATION('',(#10922),#10926);+#10922 = LINE('',#10923,#10924);+#10923 = CARTESIAN_POINT('',(0.,0.));+#10924 = VECTOR('',#10925,1.);+#10925 = DIRECTION('',(0.,-1.));+#10926 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10927 = ADVANCED_FACE('',(#10928),#6329,.T.);+#10928 = FACE_BOUND('',#10929,.T.);+#10929 = EDGE_LOOP('',(#10930,#10931,#10932,#10933));+#10930 = ORIENTED_EDGE('',*,*,#6309,.T.);+#10931 = ORIENTED_EDGE('',*,*,#10907,.T.);+#10932 = ORIENTED_EDGE('',*,*,#9880,.T.);+#10933 = ORIENTED_EDGE('',*,*,#10934,.F.);+#10934 = EDGE_CURVE('',#6265,#9881,#10935,.T.);+#10935 = SURFACE_CURVE('',#10936,(#10940,#10947),.PCURVE_S1.);+#10936 = LINE('',#10937,#10938);+#10937 = CARTESIAN_POINT('',(-0.52548733264,3.982158333762E-02,1.8000001+ ));+#10938 = VECTOR('',#10939,1.);+#10939 = DIRECTION('',(-0.,-0.,-1.));+#10940 = PCURVE('',#6329,#10941);+#10941 = DEFINITIONAL_REPRESENTATION('',(#10942),#10946);+#10942 = LINE('',#10943,#10944);+#10943 = CARTESIAN_POINT('',(1.,0.));+#10944 = VECTOR('',#10945,1.);+#10945 = DIRECTION('',(0.,-1.));+#10946 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10947 = PCURVE('',#6290,#10948);+#10948 = DEFINITIONAL_REPRESENTATION('',(#10949),#10953);+#10949 = LINE('',#10950,#10951);+#10950 = CARTESIAN_POINT('',(0.,0.));+#10951 = VECTOR('',#10952,1.);+#10952 = DIRECTION('',(0.,-1.));+#10953 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10954 = ADVANCED_FACE('',(#10955),#6290,.T.);+#10955 = FACE_BOUND('',#10956,.T.);+#10956 = EDGE_LOOP('',(#10957,#10958,#10959,#10960));+#10957 = ORIENTED_EDGE('',*,*,#6264,.T.);+#10958 = ORIENTED_EDGE('',*,*,#10934,.T.);+#10959 = ORIENTED_EDGE('',*,*,#9903,.T.);+#10960 = ORIENTED_EDGE('',*,*,#10961,.F.);+#10961 = EDGE_CURVE('',#6229,#9904,#10962,.T.);+#10962 = SURFACE_CURVE('',#10963,(#10967,#10974),.PCURVE_S1.);+#10963 = LINE('',#10964,#10965);+#10964 = CARTESIAN_POINT('',(-0.47757251384,2.084187185476E-02,1.8000001+ ));+#10965 = VECTOR('',#10966,1.);+#10966 = DIRECTION('',(-0.,-0.,-1.));+#10967 = PCURVE('',#6290,#10968);+#10968 = DEFINITIONAL_REPRESENTATION('',(#10969),#10973);+#10969 = LINE('',#10970,#10971);+#10970 = CARTESIAN_POINT('',(1.,0.));+#10971 = VECTOR('',#10972,1.);+#10972 = DIRECTION('',(0.,-1.));+#10973 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10974 = PCURVE('',#6248,#10975);+#10975 = DEFINITIONAL_REPRESENTATION('',(#10976),#10980);+#10976 = LINE('',#10977,#10978);+#10977 = CARTESIAN_POINT('',(0.,0.));+#10978 = VECTOR('',#10979,1.);+#10979 = DIRECTION('',(0.,-1.));+#10980 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10981 = ADVANCED_FACE('',(#10982),#6248,.T.);+#10982 = FACE_BOUND('',#10983,.T.);+#10983 = EDGE_LOOP('',(#10984,#10985,#10986,#10987));+#10984 = ORIENTED_EDGE('',*,*,#6228,.T.);+#10985 = ORIENTED_EDGE('',*,*,#10961,.T.);+#10986 = ORIENTED_EDGE('',*,*,#9926,.T.);+#10987 = ORIENTED_EDGE('',*,*,#10988,.F.);+#10988 = EDGE_CURVE('',#6193,#9927,#10989,.T.);+#10989 = SURFACE_CURVE('',#10990,(#10994,#11001),.PCURVE_S1.);+#10990 = LINE('',#10991,#10992);+#10991 = CARTESIAN_POINT('',(-0.460598205835,-3.294591427213E-02,+ 1.8000001));+#10992 = VECTOR('',#10993,1.);+#10993 = DIRECTION('',(-0.,-0.,-1.));+#10994 = PCURVE('',#6248,#10995);+#10995 = DEFINITIONAL_REPRESENTATION('',(#10996),#11000);+#10996 = LINE('',#10997,#10998);+#10997 = CARTESIAN_POINT('',(1.,0.));+#10998 = VECTOR('',#10999,1.);+#10999 = DIRECTION('',(0.,-1.));+#11000 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11001 = PCURVE('',#6212,#11002);+#11002 = DEFINITIONAL_REPRESENTATION('',(#11003),#11007);+#11003 = LINE('',#11004,#11005);+#11004 = CARTESIAN_POINT('',(0.,0.));+#11005 = VECTOR('',#11006,1.);+#11006 = DIRECTION('',(0.,-1.));+#11007 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11008 = ADVANCED_FACE('',(#11009),#6212,.T.);+#11009 = FACE_BOUND('',#11010,.T.);+#11010 = EDGE_LOOP('',(#11011,#11012,#11013,#11014));+#11011 = ORIENTED_EDGE('',*,*,#6192,.T.);+#11012 = ORIENTED_EDGE('',*,*,#10988,.T.);+#11013 = ORIENTED_EDGE('',*,*,#9949,.T.);+#11014 = ORIENTED_EDGE('',*,*,#11015,.F.);+#11015 = EDGE_CURVE('',#6157,#9950,#11016,.T.);+#11016 = SURFACE_CURVE('',#11017,(#11021,#11028),.PCURVE_S1.);+#11017 = LINE('',#11018,#11019);+#11018 = CARTESIAN_POINT('',(-0.47807386471,-8.666207884626E-02,+ 1.8000001));+#11019 = VECTOR('',#11020,1.);+#11020 = DIRECTION('',(-0.,-0.,-1.));+#11021 = PCURVE('',#6212,#11022);+#11022 = DEFINITIONAL_REPRESENTATION('',(#11023),#11027);+#11023 = LINE('',#11024,#11025);+#11024 = CARTESIAN_POINT('',(1.,0.));+#11025 = VECTOR('',#11026,1.);+#11026 = DIRECTION('',(0.,-1.));+#11027 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11028 = PCURVE('',#6176,#11029);+#11029 = DEFINITIONAL_REPRESENTATION('',(#11030),#11034);+#11030 = LINE('',#11031,#11032);+#11031 = CARTESIAN_POINT('',(0.,0.));+#11032 = VECTOR('',#11033,1.);+#11033 = DIRECTION('',(0.,-1.));+#11034 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11035 = ADVANCED_FACE('',(#11036),#6176,.T.);+#11036 = FACE_BOUND('',#11037,.T.);+#11037 = EDGE_LOOP('',(#11038,#11039,#11040,#11041));+#11038 = ORIENTED_EDGE('',*,*,#6156,.T.);+#11039 = ORIENTED_EDGE('',*,*,#11015,.T.);+#11040 = ORIENTED_EDGE('',*,*,#9972,.T.);+#11041 = ORIENTED_EDGE('',*,*,#11042,.F.);+#11042 = EDGE_CURVE('',#6112,#9973,#11043,.T.);+#11043 = SURFACE_CURVE('',#11044,(#11048,#11055),.PCURVE_S1.);+#11044 = LINE('',#11045,#11046);+#11045 = CARTESIAN_POINT('',(-0.527206249907,-0.105713411882,1.8000001)+ );+#11046 = VECTOR('',#11047,1.);+#11047 = DIRECTION('',(-0.,-0.,-1.));+#11048 = PCURVE('',#6176,#11049);+#11049 = DEFINITIONAL_REPRESENTATION('',(#11050),#11054);+#11050 = LINE('',#11051,#11052);+#11051 = CARTESIAN_POINT('',(1.,0.));+#11052 = VECTOR('',#11053,1.);+#11053 = DIRECTION('',(0.,-1.));+#11054 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11055 = PCURVE('',#6137,#11056);+#11056 = DEFINITIONAL_REPRESENTATION('',(#11057),#11061);+#11057 = LINE('',#11058,#11059);+#11058 = CARTESIAN_POINT('',(0.,0.));+#11059 = VECTOR('',#11060,1.);+#11060 = DIRECTION('',(0.,-1.));+#11061 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11062 = ADVANCED_FACE('',(#11063),#6137,.T.);+#11063 = FACE_BOUND('',#11064,.T.);+#11064 = EDGE_LOOP('',(#11065,#11066,#11067,#11068));+#11065 = ORIENTED_EDGE('',*,*,#6111,.T.);+#11066 = ORIENTED_EDGE('',*,*,#11042,.T.);+#11067 = ORIENTED_EDGE('',*,*,#9995,.T.);+#11068 = ORIENTED_EDGE('',*,*,#11069,.F.);+#11069 = EDGE_CURVE('',#6076,#9996,#11070,.T.);+#11070 = SURFACE_CURVE('',#11071,(#11075,#11082),.PCURVE_S1.);+#11071 = LINE('',#11072,#11073);+#11072 = CARTESIAN_POINT('',(-0.581781873114,-7.899857270035E-02,+ 1.8000001));+#11073 = VECTOR('',#11074,1.);+#11074 = DIRECTION('',(-0.,-0.,-1.));+#11075 = PCURVE('',#6137,#11076);+#11076 = DEFINITIONAL_REPRESENTATION('',(#11077),#11081);+#11077 = LINE('',#11078,#11079);+#11078 = CARTESIAN_POINT('',(1.,0.));+#11079 = VECTOR('',#11080,1.);+#11080 = DIRECTION('',(0.,-1.));+#11081 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11082 = PCURVE('',#6095,#11083);+#11083 = DEFINITIONAL_REPRESENTATION('',(#11084),#11088);+#11084 = LINE('',#11085,#11086);+#11085 = CARTESIAN_POINT('',(0.,0.));+#11086 = VECTOR('',#11087,1.);+#11087 = DIRECTION('',(0.,-1.));+#11088 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11089 = ADVANCED_FACE('',(#11090),#6095,.T.);+#11090 = FACE_BOUND('',#11091,.T.);+#11091 = EDGE_LOOP('',(#11092,#11093,#11094,#11095));+#11092 = ORIENTED_EDGE('',*,*,#6075,.T.);+#11093 = ORIENTED_EDGE('',*,*,#11069,.T.);+#11094 = ORIENTED_EDGE('',*,*,#10018,.T.);+#11095 = ORIENTED_EDGE('',*,*,#11096,.F.);+#11096 = EDGE_CURVE('',#6040,#10019,#11097,.T.);+#11097 = SURFACE_CURVE('',#11098,(#11102,#11109),.PCURVE_S1.);+#11098 = LINE('',#11099,#11100);+#11099 = CARTESIAN_POINT('',(-0.599114288883,5.156751799116E-03,+ 1.8000001));+#11100 = VECTOR('',#11101,1.);+#11101 = DIRECTION('',(-0.,-0.,-1.));+#11102 = PCURVE('',#6095,#11103);+#11103 = DEFINITIONAL_REPRESENTATION('',(#11104),#11108);+#11104 = LINE('',#11105,#11106);+#11105 = CARTESIAN_POINT('',(1.,0.));+#11106 = VECTOR('',#11107,1.);+#11107 = DIRECTION('',(0.,-1.));+#11108 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11109 = PCURVE('',#6059,#11110);+#11110 = DEFINITIONAL_REPRESENTATION('',(#11111),#11115);+#11111 = LINE('',#11112,#11113);+#11112 = CARTESIAN_POINT('',(0.,0.));+#11113 = VECTOR('',#11114,1.);+#11114 = DIRECTION('',(0.,-1.));+#11115 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11116 = ADVANCED_FACE('',(#11117),#6059,.T.);+#11117 = FACE_BOUND('',#11118,.T.);+#11118 = EDGE_LOOP('',(#11119,#11120,#11121,#11122));+#11119 = ORIENTED_EDGE('',*,*,#6039,.T.);+#11120 = ORIENTED_EDGE('',*,*,#11096,.T.);+#11121 = ORIENTED_EDGE('',*,*,#10041,.T.);+#11122 = ORIENTED_EDGE('',*,*,#11123,.F.);+#11123 = EDGE_CURVE('',#5995,#10042,#11124,.T.);+#11124 = SURFACE_CURVE('',#11125,(#11129,#11136),.PCURVE_S1.);+#11125 = LINE('',#11126,#11127);+#11126 = CARTESIAN_POINT('',(-0.578272417029,8.773640213774E-02,+ 1.8000001));+#11127 = VECTOR('',#11128,1.);+#11128 = DIRECTION('',(-0.,-0.,-1.));+#11129 = PCURVE('',#6059,#11130);+#11130 = DEFINITIONAL_REPRESENTATION('',(#11131),#11135);+#11131 = LINE('',#11132,#11133);+#11132 = CARTESIAN_POINT('',(1.,0.));+#11133 = VECTOR('',#11134,1.);+#11134 = DIRECTION('',(0.,-1.));+#11135 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11136 = PCURVE('',#6020,#11137);+#11137 = DEFINITIONAL_REPRESENTATION('',(#11138),#11142);+#11138 = LINE('',#11139,#11140);+#11139 = CARTESIAN_POINT('',(0.,0.));+#11140 = VECTOR('',#11141,1.);+#11141 = DIRECTION('',(0.,-1.));+#11142 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11143 = ADVANCED_FACE('',(#11144),#6020,.T.);+#11144 = FACE_BOUND('',#11145,.T.);+#11145 = EDGE_LOOP('',(#11146,#11147,#11148,#11149));+#11146 = ORIENTED_EDGE('',*,*,#5994,.T.);+#11147 = ORIENTED_EDGE('',*,*,#11123,.T.);+#11148 = ORIENTED_EDGE('',*,*,#10064,.T.);+#11149 = ORIENTED_EDGE('',*,*,#11150,.F.);+#11150 = EDGE_CURVE('',#5959,#10065,#11151,.T.);+#11151 = SURFACE_CURVE('',#11152,(#11156,#11163),.PCURVE_S1.);+#11152 = LINE('',#11153,#11154);+#11153 = CARTESIAN_POINT('',(-0.517895448047,0.116170158586,1.8000001));+#11154 = VECTOR('',#11155,1.);+#11155 = DIRECTION('',(-0.,-0.,-1.));+#11156 = PCURVE('',#6020,#11157);+#11157 = DEFINITIONAL_REPRESENTATION('',(#11158),#11162);+#11158 = LINE('',#11159,#11160);+#11159 = CARTESIAN_POINT('',(1.,0.));+#11160 = VECTOR('',#11161,1.);+#11161 = DIRECTION('',(0.,-1.));+#11162 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11163 = PCURVE('',#5978,#11164);+#11164 = DEFINITIONAL_REPRESENTATION('',(#11165),#11169);+#11165 = LINE('',#11166,#11167);+#11166 = CARTESIAN_POINT('',(0.,0.));+#11167 = VECTOR('',#11168,1.);+#11168 = DIRECTION('',(0.,-1.));+#11169 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11170 = ADVANCED_FACE('',(#11171),#5978,.T.);+#11171 = FACE_BOUND('',#11172,.T.);+#11172 = EDGE_LOOP('',(#11173,#11174,#11175,#11176));+#11173 = ORIENTED_EDGE('',*,*,#5958,.T.);+#11174 = ORIENTED_EDGE('',*,*,#11150,.T.);+#11175 = ORIENTED_EDGE('',*,*,#10087,.T.);+#11176 = ORIENTED_EDGE('',*,*,#11177,.F.);+#11177 = EDGE_CURVE('',#5923,#10088,#11178,.T.);+#11178 = SURFACE_CURVE('',#11179,(#11183,#11190),.PCURVE_S1.);+#11179 = LINE('',#11180,#11181);+#11180 = CARTESIAN_POINT('',(-0.496695468429,0.11394989045,1.8000001));+#11181 = VECTOR('',#11182,1.);+#11182 = DIRECTION('',(-0.,-0.,-1.));+#11183 = PCURVE('',#5978,#11184);+#11184 = DEFINITIONAL_REPRESENTATION('',(#11185),#11189);+#11185 = LINE('',#11186,#11187);+#11186 = CARTESIAN_POINT('',(1.,0.));+#11187 = VECTOR('',#11188,1.);+#11188 = DIRECTION('',(0.,-1.));+#11189 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11190 = PCURVE('',#5942,#11191);+#11191 = DEFINITIONAL_REPRESENTATION('',(#11192),#11196);+#11192 = LINE('',#11193,#11194);+#11193 = CARTESIAN_POINT('',(0.,0.));+#11194 = VECTOR('',#11195,1.);+#11195 = DIRECTION('',(0.,-1.));+#11196 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11197 = ADVANCED_FACE('',(#11198),#5942,.T.);+#11198 = FACE_BOUND('',#11199,.T.);+#11199 = EDGE_LOOP('',(#11200,#11201,#11202,#11203));+#11200 = ORIENTED_EDGE('',*,*,#5922,.T.);+#11201 = ORIENTED_EDGE('',*,*,#11177,.T.);+#11202 = ORIENTED_EDGE('',*,*,#10110,.T.);+#11203 = ORIENTED_EDGE('',*,*,#11204,.F.);+#11204 = EDGE_CURVE('',#5896,#9765,#11205,.T.);+#11205 = SURFACE_CURVE('',#11206,(#11210,#11217),.PCURVE_S1.);+#11206 = LINE('',#11207,#11208);+#11207 = CARTESIAN_POINT('',(-0.476211704338,0.107575572254,1.8000001));+#11208 = VECTOR('',#11209,1.);+#11209 = DIRECTION('',(-0.,-0.,-1.));+#11210 = PCURVE('',#5942,#11211);+#11211 = DEFINITIONAL_REPRESENTATION('',(#11212),#11216);+#11212 = LINE('',#11213,#11214);+#11213 = CARTESIAN_POINT('',(1.,0.));+#11214 = VECTOR('',#11215,1.);+#11215 = DIRECTION('',(0.,-1.));+#11216 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11217 = PCURVE('',#5911,#11218);+#11218 = DEFINITIONAL_REPRESENTATION('',(#11219),#11223);+#11219 = LINE('',#11220,#11221);+#11220 = CARTESIAN_POINT('',(0.,0.));+#11221 = VECTOR('',#11222,1.);+#11222 = DIRECTION('',(0.,-1.));+#11223 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11224 = ADVANCED_FACE('',(#11225),#5911,.T.);+#11225 = FACE_BOUND('',#11226,.T.);+#11226 = EDGE_LOOP('',(#11227,#11228,#11229,#11230));+#11227 = ORIENTED_EDGE('',*,*,#5895,.T.);+#11228 = ORIENTED_EDGE('',*,*,#11204,.T.);+#11229 = ORIENTED_EDGE('',*,*,#9764,.T.);+#11230 = ORIENTED_EDGE('',*,*,#11231,.F.);+#11231 = EDGE_CURVE('',#5860,#9767,#11232,.T.);+#11232 = SURFACE_CURVE('',#11233,(#11237,#11244),.PCURVE_S1.);+#11233 = LINE('',#11234,#11235);+#11234 = CARTESIAN_POINT('',(-0.476211704338,8.093235462502E-02,+ 1.8000001));+#11235 = VECTOR('',#11236,1.);+#11236 = DIRECTION('',(-0.,-0.,-1.));+#11237 = PCURVE('',#5911,#11238);+#11238 = DEFINITIONAL_REPRESENTATION('',(#11239),#11243);+#11239 = LINE('',#11240,#11241);+#11240 = CARTESIAN_POINT('',(2.664321762877E-02,0.));+#11241 = VECTOR('',#11242,1.);+#11242 = DIRECTION('',(0.,-1.));+#11243 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11244 = PCURVE('',#5879,#11245);+#11245 = DEFINITIONAL_REPRESENTATION('',(#11246),#11250);+#11246 = LINE('',#11247,#11248);+#11247 = CARTESIAN_POINT('',(0.,0.));+#11248 = VECTOR('',#11249,1.);+#11249 = DIRECTION('',(0.,-1.));+#11250 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11251 = ADVANCED_FACE('',(#11252),#5879,.T.);+#11252 = FACE_BOUND('',#11253,.T.);+#11253 = EDGE_LOOP('',(#11254,#11255,#11256,#11257));+#11254 = ORIENTED_EDGE('',*,*,#5857,.T.);+#11255 = ORIENTED_EDGE('',*,*,#11231,.T.);+#11256 = ORIENTED_EDGE('',*,*,#9789,.T.);+#11257 = ORIENTED_EDGE('',*,*,#9689,.F.);+#11258 = ADVANCED_FACE('',(#11259),#5844,.T.);+#11259 = FACE_BOUND('',#11260,.T.);+#11260 = EDGE_LOOP('',(#11261,#11262,#11285,#11313));+#11261 = ORIENTED_EDGE('',*,*,#5830,.T.);+#11262 = ORIENTED_EDGE('',*,*,#11263,.T.);+#11263 = EDGE_CURVE('',#5091,#11264,#11266,.T.);+#11264 = VERTEX_POINT('',#11265);+#11265 = CARTESIAN_POINT('',(-0.303603762173,0.112302594736,1.7000001));+#11266 = SURFACE_CURVE('',#11267,(#11271,#11278),.PCURVE_S1.);+#11267 = LINE('',#11268,#11269);+#11268 = CARTESIAN_POINT('',(-0.303603762173,0.112302594736,1.8000001));+#11269 = VECTOR('',#11270,1.);+#11270 = DIRECTION('',(-0.,-0.,-1.));+#11271 = PCURVE('',#5844,#11272);+#11272 = DEFINITIONAL_REPRESENTATION('',(#11273),#11277);+#11273 = LINE('',#11274,#11275);+#11274 = CARTESIAN_POINT('',(0.,0.));+#11275 = VECTOR('',#11276,1.);+#11276 = DIRECTION('',(0.,-1.));+#11277 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11278 = PCURVE('',#5108,#11279);+#11279 = DEFINITIONAL_REPRESENTATION('',(#11280),#11284);+#11280 = LINE('',#11281,#11282);+#11281 = CARTESIAN_POINT('',(0.108291787781,0.));+#11282 = VECTOR('',#11283,1.);+#11283 = DIRECTION('',(0.,-1.));+#11284 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11285 = ORIENTED_EDGE('',*,*,#11286,.T.);+#11286 = EDGE_CURVE('',#11264,#11287,#11289,.T.);+#11287 = VERTEX_POINT('',#11288);+#11288 = CARTESIAN_POINT('',(-0.303603762173,8.795126679604E-02,+ 1.7000001));+#11289 = SURFACE_CURVE('',#11290,(#11294,#11301),.PCURVE_S1.);+#11290 = LINE('',#11291,#11292);+#11291 = CARTESIAN_POINT('',(-0.303603762173,0.112302594736,1.7000001));+#11292 = VECTOR('',#11293,1.);+#11293 = DIRECTION('',(0.,-1.,0.));+#11294 = PCURVE('',#5844,#11295);+#11295 = DEFINITIONAL_REPRESENTATION('',(#11296),#11300);+#11296 = LINE('',#11297,#11298);+#11297 = CARTESIAN_POINT('',(0.,-0.1));+#11298 = VECTOR('',#11299,1.);+#11299 = DIRECTION('',(1.,0.));+#11300 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11301 = PCURVE('',#11302,#11307);+#11302 = PLANE('',#11303);+#11303 = AXIS2_PLACEMENT_3D('',#11304,#11305,#11306);+#11304 = CARTESIAN_POINT('',(-0.441546872799,-0.101559361821,1.7000001)+ );+#11305 = DIRECTION('',(0.,0.,1.));+#11306 = DIRECTION('',(1.,0.,0.));+#11307 = DEFINITIONAL_REPRESENTATION('',(#11308),#11312);+#11308 = LINE('',#11309,#11310);+#11309 = CARTESIAN_POINT('',(0.137943110626,0.213861956558));+#11310 = VECTOR('',#11311,1.);+#11311 = DIRECTION('',(0.,-1.));+#11312 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11313 = ORIENTED_EDGE('',*,*,#11314,.F.);+#11314 = EDGE_CURVE('',#5804,#11287,#11315,.T.);+#11315 = SURFACE_CURVE('',#11316,(#11320,#11327),.PCURVE_S1.);+#11316 = LINE('',#11317,#11318);+#11317 = CARTESIAN_POINT('',(-0.303603762173,8.795126679604E-02,+ 1.8000001));+#11318 = VECTOR('',#11319,1.);+#11319 = DIRECTION('',(-0.,-0.,-1.));+#11320 = PCURVE('',#5844,#11321);+#11321 = DEFINITIONAL_REPRESENTATION('',(#11322),#11326);+#11322 = LINE('',#11323,#11324);+#11323 = CARTESIAN_POINT('',(2.435132794027E-02,0.));+#11324 = VECTOR('',#11325,1.);+#11325 = DIRECTION('',(0.,-1.));+#11326 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11327 = PCURVE('',#5819,#11328);+#11328 = DEFINITIONAL_REPRESENTATION('',(#11329),#11333);+#11329 = LINE('',#11330,#11331);+#11330 = CARTESIAN_POINT('',(0.,0.));+#11331 = VECTOR('',#11332,1.);+#11332 = DIRECTION('',(0.,-1.));+#11333 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11334 = ADVANCED_FACE('',(#11335),#11302,.T.);+#11335 = FACE_BOUND('',#11336,.F.);+#11336 = EDGE_LOOP('',(#11337,#11362,#11383,#11384,#11407,#11430,#11453,+ #11476,#11499,#11522,#11545,#11568,#11591,#11614,#11637,#11660,+ #11683,#11706,#11729,#11752,#11775,#11798));+#11337 = ORIENTED_EDGE('',*,*,#11338,.T.);+#11338 = EDGE_CURVE('',#11339,#11341,#11343,.T.);+#11339 = VERTEX_POINT('',#11340);+#11340 = CARTESIAN_POINT('',(-0.411895549954,4.870265588054E-03,+ 1.7000001));+#11341 = VERTEX_POINT('',#11342);+#11342 = CARTESIAN_POINT('',(-0.411895549954,0.112302594736,1.7000001));+#11343 = SURFACE_CURVE('',#11344,(#11348,#11355),.PCURVE_S1.);+#11344 = LINE('',#11345,#11346);+#11345 = CARTESIAN_POINT('',(-0.411895549954,4.870265588054E-03,+ 1.7000001));+#11346 = VECTOR('',#11347,1.);+#11347 = DIRECTION('',(0.,1.,0.));+#11348 = PCURVE('',#11302,#11349);+#11349 = DEFINITIONAL_REPRESENTATION('',(#11350),#11354);+#11350 = LINE('',#11351,#11352);+#11351 = CARTESIAN_POINT('',(2.965132284492E-02,0.10642962741));+#11352 = VECTOR('',#11353,1.);+#11353 = DIRECTION('',(0.,1.));+#11354 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11355 = PCURVE('',#5135,#11356);+#11356 = DEFINITIONAL_REPRESENTATION('',(#11357),#11361);+#11357 = LINE('',#11358,#11359);+#11358 = CARTESIAN_POINT('',(0.,-0.1));+#11359 = VECTOR('',#11360,1.);+#11360 = DIRECTION('',(1.,0.));+#11361 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11362 = ORIENTED_EDGE('',*,*,#11363,.T.);+#11363 = EDGE_CURVE('',#11341,#11264,#11364,.T.);+#11364 = SURFACE_CURVE('',#11365,(#11369,#11376),.PCURVE_S1.);+#11365 = LINE('',#11366,#11367);+#11366 = CARTESIAN_POINT('',(-0.411895549954,0.112302594736,1.7000001));+#11367 = VECTOR('',#11368,1.);+#11368 = DIRECTION('',(1.,0.,0.));+#11369 = PCURVE('',#11302,#11370);+#11370 = DEFINITIONAL_REPRESENTATION('',(#11371),#11375);+#11371 = LINE('',#11372,#11373);+#11372 = CARTESIAN_POINT('',(2.965132284492E-02,0.213861956558));+#11373 = VECTOR('',#11374,1.);+#11374 = DIRECTION('',(1.,0.));+#11375 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11376 = PCURVE('',#5108,#11377);+#11377 = DEFINITIONAL_REPRESENTATION('',(#11378),#11382);+#11378 = LINE('',#11379,#11380);+#11379 = CARTESIAN_POINT('',(0.,-0.1));+#11380 = VECTOR('',#11381,1.);+#11381 = DIRECTION('',(1.,0.));+#11382 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11383 = ORIENTED_EDGE('',*,*,#11286,.T.);+#11384 = ORIENTED_EDGE('',*,*,#11385,.T.);+#11385 = EDGE_CURVE('',#11287,#11386,#11388,.T.);+#11386 = VERTEX_POINT('',#11387);+#11387 = CARTESIAN_POINT('',(-0.385538818537,8.795126679604E-02,+ 1.7000001));+#11388 = SURFACE_CURVE('',#11389,(#11393,#11400),.PCURVE_S1.);+#11389 = LINE('',#11390,#11391);+#11390 = CARTESIAN_POINT('',(-0.303603762173,8.795126679604E-02,+ 1.7000001));+#11391 = VECTOR('',#11392,1.);+#11392 = DIRECTION('',(-1.,0.,0.));+#11393 = PCURVE('',#11302,#11394);+#11394 = DEFINITIONAL_REPRESENTATION('',(#11395),#11399);+#11395 = LINE('',#11396,#11397);+#11396 = CARTESIAN_POINT('',(0.137943110626,0.189510628618));+#11397 = VECTOR('',#11398,1.);+#11398 = DIRECTION('',(-1.,0.));+#11399 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11400 = PCURVE('',#5819,#11401);+#11401 = DEFINITIONAL_REPRESENTATION('',(#11402),#11406);+#11402 = LINE('',#11403,#11404);+#11403 = CARTESIAN_POINT('',(0.,-0.1));+#11404 = VECTOR('',#11405,1.);+#11405 = DIRECTION('',(1.,0.));+#11406 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11407 = ORIENTED_EDGE('',*,*,#11408,.T.);+#11408 = EDGE_CURVE('',#11386,#11409,#11411,.T.);+#11409 = VERTEX_POINT('',#11410);+#11410 = CARTESIAN_POINT('',(-0.385538818537,3.538104706616E-02,+ 1.7000001));+#11411 = SURFACE_CURVE('',#11412,(#11416,#11423),.PCURVE_S1.);+#11412 = LINE('',#11413,#11414);+#11413 = CARTESIAN_POINT('',(-0.385538818537,8.795126679604E-02,+ 1.7000001));+#11414 = VECTOR('',#11415,1.);+#11415 = DIRECTION('',(0.,-1.,0.));+#11416 = PCURVE('',#11302,#11417);+#11417 = DEFINITIONAL_REPRESENTATION('',(#11418),#11422);+#11418 = LINE('',#11419,#11420);+#11419 = CARTESIAN_POINT('',(5.600805426262E-02,0.189510628618));+#11420 = VECTOR('',#11421,1.);+#11421 = DIRECTION('',(0.,-1.));+#11422 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11423 = PCURVE('',#5792,#11424);+#11424 = DEFINITIONAL_REPRESENTATION('',(#11425),#11429);+#11425 = LINE('',#11426,#11427);+#11426 = CARTESIAN_POINT('',(0.,-0.1));+#11427 = VECTOR('',#11428,1.);+#11428 = DIRECTION('',(1.,0.));+#11429 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11430 = ORIENTED_EDGE('',*,*,#11431,.T.);+#11431 = EDGE_CURVE('',#11409,#11432,#11434,.T.);+#11432 = VERTEX_POINT('',#11433);+#11433 = CARTESIAN_POINT('',(-0.373148289908,3.874726004614E-02,+ 1.7000001));+#11434 = SURFACE_CURVE('',#11435,(#11439,#11446),.PCURVE_S1.);+#11435 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#11436,#11437,#11438),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#11436 = CARTESIAN_POINT('',(-0.385538818537,3.538104706616E-02,+ 1.7000001));+#11437 = CARTESIAN_POINT('',(-0.379379364999,3.767293675465E-02,+ 1.7000001));+#11438 = CARTESIAN_POINT('',(-0.373148289908,3.874726004614E-02,+ 1.7000001));+#11439 = PCURVE('',#11302,#11440);+#11440 = DEFINITIONAL_REPRESENTATION('',(#11441),#11445);+#11441 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#11442,#11443,#11444),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#11442 = CARTESIAN_POINT('',(5.600805426262E-02,0.136940408888));+#11443 = CARTESIAN_POINT('',(6.216750780046E-02,0.139232298576));+#11444 = CARTESIAN_POINT('',(6.839858289106E-02,0.140306621868));+#11445 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11446 = PCURVE('',#5760,#11447);+#11447 = DEFINITIONAL_REPRESENTATION('',(#11448),#11452);+#11448 = LINE('',#11449,#11450);+#11449 = CARTESIAN_POINT('',(0.,-0.1));+#11450 = VECTOR('',#11451,1.);+#11451 = DIRECTION('',(1.,0.));+#11452 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11453 = ORIENTED_EDGE('',*,*,#11454,.T.);+#11454 = EDGE_CURVE('',#11432,#11455,#11457,.T.);+#11455 = VERTEX_POINT('',#11456);+#11456 = CARTESIAN_POINT('',(-0.360614518174,3.982158333762E-02,+ 1.7000001));+#11457 = SURFACE_CURVE('',#11458,(#11462,#11469),.PCURVE_S1.);+#11458 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#11459,#11460,#11461),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#11459 = CARTESIAN_POINT('',(-0.373148289908,3.874726004614E-02,+ 1.7000001));+#11460 = CARTESIAN_POINT('',(-0.366917214818,3.982158333762E-02,+ 1.7000001));+#11461 = CARTESIAN_POINT('',(-0.360614518174,3.982158333762E-02,+ 1.7000001));+#11462 = PCURVE('',#11302,#11463);+#11463 = DEFINITIONAL_REPRESENTATION('',(#11464),#11468);+#11464 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#11465,#11466,#11467),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#11465 = CARTESIAN_POINT('',(6.839858289106E-02,0.140306621868));+#11466 = CARTESIAN_POINT('',(7.462965798165E-02,0.141380945159));+#11467 = CARTESIAN_POINT('',(8.093235462502E-02,0.141380945159));+#11468 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11469 = PCURVE('',#5724,#11470);+#11470 = DEFINITIONAL_REPRESENTATION('',(#11471),#11475);+#11471 = LINE('',#11472,#11473);+#11472 = CARTESIAN_POINT('',(0.,-0.1));+#11473 = VECTOR('',#11474,1.);+#11474 = DIRECTION('',(1.,0.));+#11475 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11476 = ORIENTED_EDGE('',*,*,#11477,.T.);+#11477 = EDGE_CURVE('',#11455,#11478,#11480,.T.);+#11478 = VERTEX_POINT('',#11479);+#11479 = CARTESIAN_POINT('',(-0.307901055339,2.019727787987E-02,+ 1.7000001));+#11480 = SURFACE_CURVE('',#11481,(#11485,#11492),.PCURVE_S1.);+#11481 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#11482,#11483,#11484),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#11482 = CARTESIAN_POINT('',(-0.360614518174,3.982158333762E-02,+ 1.7000001));+#11483 = CARTESIAN_POINT('',(-0.327382117691,3.982158333762E-02,+ 1.7000001));+#11484 = CARTESIAN_POINT('',(-0.307901055339,2.019727787987E-02,+ 1.7000001));+#11485 = PCURVE('',#11302,#11486);+#11486 = DEFINITIONAL_REPRESENTATION('',(#11487),#11491);+#11487 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#11488,#11489,#11490),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#11488 = CARTESIAN_POINT('',(8.093235462502E-02,0.141380945159));+#11489 = CARTESIAN_POINT('',(0.114164755108,0.141380945159));+#11490 = CARTESIAN_POINT('',(0.13364581746,0.121756639701));+#11491 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11492 = PCURVE('',#5685,#11493);+#11493 = DEFINITIONAL_REPRESENTATION('',(#11494),#11498);+#11494 = LINE('',#11495,#11496);+#11495 = CARTESIAN_POINT('',(0.,-0.1));+#11496 = VECTOR('',#11497,1.);+#11497 = DIRECTION('',(1.,0.));+#11498 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11499 = ORIENTED_EDGE('',*,*,#11500,.T.);+#11500 = EDGE_CURVE('',#11478,#11501,#11503,.T.);+#11501 = VERTEX_POINT('',#11502);+#11502 = CARTESIAN_POINT('',(-0.288419992987,-3.294591427213E-02,+ 1.7000001));+#11503 = SURFACE_CURVE('',#11504,(#11508,#11515),.PCURVE_S1.);+#11504 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#11505,#11506,#11507),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#11505 = CARTESIAN_POINT('',(-0.307901055339,2.019727787987E-02,+ 1.7000001));+#11506 = CARTESIAN_POINT('',(-0.288419992987,5.72972422124E-04,1.7000001+ ));+#11507 = CARTESIAN_POINT('',(-0.288419992987,-3.294591427213E-02,+ 1.7000001));+#11508 = PCURVE('',#11302,#11509);+#11509 = DEFINITIONAL_REPRESENTATION('',(#11510),#11514);+#11510 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#11511,#11512,#11513),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#11511 = CARTESIAN_POINT('',(0.13364581746,0.121756639701));+#11512 = CARTESIAN_POINT('',(0.153126879813,0.102132334244));+#11513 = CARTESIAN_POINT('',(0.153126879813,6.861344754935E-02));+#11514 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11515 = PCURVE('',#5643,#11516);+#11516 = DEFINITIONAL_REPRESENTATION('',(#11517),#11521);+#11517 = LINE('',#11518,#11519);+#11518 = CARTESIAN_POINT('',(0.,-0.1));+#11519 = VECTOR('',#11520,1.);+#11520 = DIRECTION('',(1.,0.));+#11521 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11522 = ORIENTED_EDGE('',*,*,#11523,.T.);+#11523 = EDGE_CURVE('',#11501,#11524,#11526,.T.);+#11524 = VERTEX_POINT('',#11525);+#11525 = CARTESIAN_POINT('',(-0.308832135525,-8.623234952967E-02,+ 1.7000001));+#11526 = SURFACE_CURVE('',#11527,(#11531,#11538),.PCURVE_S1.);+#11527 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#11528,#11529,#11530),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#11528 = CARTESIAN_POINT('',(-0.288419992987,-3.294591427213E-02,+ 1.7000001));+#11529 = CARTESIAN_POINT('',(-0.288419992987,-6.675128717745E-02,+ 1.7000001));+#11530 = CARTESIAN_POINT('',(-0.308832135525,-8.623234952967E-02,+ 1.7000001));+#11531 = PCURVE('',#11302,#11532);+#11532 = DEFINITIONAL_REPRESENTATION('',(#11533),#11537);+#11533 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#11534,#11535,#11536),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#11534 = CARTESIAN_POINT('',(0.153126879813,6.861344754935E-02));+#11535 = CARTESIAN_POINT('',(0.153126879813,3.480807464403E-02));+#11536 = CARTESIAN_POINT('',(0.132714737274,1.532701229182E-02));+#11537 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11538 = PCURVE('',#5604,#11539);+#11539 = DEFINITIONAL_REPRESENTATION('',(#11540),#11544);+#11540 = LINE('',#11541,#11542);+#11541 = CARTESIAN_POINT('',(0.,-0.1));+#11542 = VECTOR('',#11543,1.);+#11543 = DIRECTION('',(1.,0.));+#11544 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11545 = ORIENTED_EDGE('',*,*,#11546,.T.);+#11546 = EDGE_CURVE('',#11524,#11547,#11549,.T.);+#11547 = VERTEX_POINT('',#11548);+#11548 = CARTESIAN_POINT('',(-0.364625325129,-0.105713411882,1.7000001)+ );+#11549 = SURFACE_CURVE('',#11550,(#11554,#11561),.PCURVE_S1.);+#11550 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#11551,#11552,#11553),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#11551 = CARTESIAN_POINT('',(-0.308832135525,-8.623234952967E-02,+ 1.7000001));+#11552 = CARTESIAN_POINT('',(-0.329244278063,-0.105713411882,1.7000001)+ );+#11553 = CARTESIAN_POINT('',(-0.364625325129,-0.105713411882,1.7000001)+ );+#11554 = PCURVE('',#11302,#11555);+#11555 = DEFINITIONAL_REPRESENTATION('',(#11556),#11560);+#11556 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#11557,#11558,#11559),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#11557 = CARTESIAN_POINT('',(0.132714737274,1.532701229182E-02));+#11558 = CARTESIAN_POINT('',(0.112302594736,-4.154050060399E-03));+#11559 = CARTESIAN_POINT('',(7.692154767015E-02,-4.154050060399E-03));+#11560 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11561 = PCURVE('',#5562,#11562);+#11562 = DEFINITIONAL_REPRESENTATION('',(#11563),#11567);+#11563 = LINE('',#11564,#11565);+#11564 = CARTESIAN_POINT('',(0.,-0.1));+#11565 = VECTOR('',#11566,1.);+#11566 = DIRECTION('',(1.,0.));+#11567 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11568 = ORIENTED_EDGE('',*,*,#11569,.T.);+#11569 = EDGE_CURVE('',#11547,#11570,#11572,.T.);+#11570 = VERTEX_POINT('',#11571);+#11571 = CARTESIAN_POINT('',(-0.395780700582,-0.103421522193,1.7000001)+ );+#11572 = SURFACE_CURVE('',#11573,(#11577,#11584),.PCURVE_S1.);+#11573 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#11574,#11575,#11576),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#11574 = CARTESIAN_POINT('',(-0.364625325129,-0.105713411882,1.7000001)+ );+#11575 = CARTESIAN_POINT('',(-0.381671254687,-0.105713411882,1.7000001)+ );+#11576 = CARTESIAN_POINT('',(-0.395780700582,-0.103421522193,1.7000001)+ );+#11577 = PCURVE('',#11302,#11578);+#11578 = DEFINITIONAL_REPRESENTATION('',(#11579),#11583);+#11579 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#11580,#11581,#11582),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#11580 = CARTESIAN_POINT('',(7.692154767015E-02,-4.154050060399E-03));+#11581 = CARTESIAN_POINT('',(5.987561811196E-02,-4.154050060399E-03));+#11582 = CARTESIAN_POINT('',(4.576617221716E-02,-1.862160371903E-03));+#11583 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11584 = PCURVE('',#5526,#11585);+#11585 = DEFINITIONAL_REPRESENTATION('',(#11586),#11590);+#11586 = LINE('',#11587,#11588);+#11587 = CARTESIAN_POINT('',(0.,-0.1));+#11588 = VECTOR('',#11589,1.);+#11589 = DIRECTION('',(1.,0.));+#11590 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11591 = ORIENTED_EDGE('',*,*,#11592,.T.);+#11592 = EDGE_CURVE('',#11570,#11593,#11595,.T.);+#11593 = VERTEX_POINT('',#11594);+#11594 = CARTESIAN_POINT('',(-0.421063108708,-9.65458531279E-02,+ 1.7000001));+#11595 = SURFACE_CURVE('',#11596,(#11600,#11607),.PCURVE_S1.);+#11596 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#11597,#11598,#11599),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#11597 = CARTESIAN_POINT('',(-0.395780700582,-0.103421522193,1.7000001)+ );+#11598 = CARTESIAN_POINT('',(-0.409890146477,-0.101129632505,1.7000001)+ );+#11599 = CARTESIAN_POINT('',(-0.421063108708,-9.65458531279E-02,+ 1.7000001));+#11600 = PCURVE('',#11302,#11601);+#11601 = DEFINITIONAL_REPRESENTATION('',(#11602),#11606);+#11602 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#11603,#11604,#11605),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#11603 = CARTESIAN_POINT('',(4.576617221716E-02,-1.862160371903E-03));+#11604 = CARTESIAN_POINT('',(3.165672632235E-02,4.29729316593E-04));+#11605 = CARTESIAN_POINT('',(2.048376409093E-02,5.013508693585E-03));+#11606 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11607 = PCURVE('',#5490,#11608);+#11608 = DEFINITIONAL_REPRESENTATION('',(#11609),#11613);+#11609 = LINE('',#11610,#11611);+#11610 = CARTESIAN_POINT('',(0.,-0.1));+#11611 = VECTOR('',#11612,1.);+#11612 = DIRECTION('',(1.,0.));+#11613 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11614 = ORIENTED_EDGE('',*,*,#11615,.T.);+#11615 = EDGE_CURVE('',#11593,#11616,#11618,.T.);+#11616 = VERTEX_POINT('',#11617);+#11617 = CARTESIAN_POINT('',(-0.421063108708,-6.718101649404E-02,+ 1.7000001));+#11618 = SURFACE_CURVE('',#11619,(#11623,#11630),.PCURVE_S1.);+#11619 = LINE('',#11620,#11621);+#11620 = CARTESIAN_POINT('',(-0.421063108708,-9.65458531279E-02,+ 1.7000001));+#11621 = VECTOR('',#11622,1.);+#11622 = DIRECTION('',(0.,1.,0.));+#11623 = PCURVE('',#11302,#11624);+#11624 = DEFINITIONAL_REPRESENTATION('',(#11625),#11629);+#11625 = LINE('',#11626,#11627);+#11626 = CARTESIAN_POINT('',(2.048376409093E-02,5.013508693585E-03));+#11627 = VECTOR('',#11628,1.);+#11628 = DIRECTION('',(0.,1.));+#11629 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11630 = PCURVE('',#5459,#11631);+#11631 = DEFINITIONAL_REPRESENTATION('',(#11632),#11636);+#11632 = LINE('',#11633,#11634);+#11633 = CARTESIAN_POINT('',(0.,-0.1));+#11634 = VECTOR('',#11635,1.);+#11635 = DIRECTION('',(1.,0.));+#11636 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11637 = ORIENTED_EDGE('',*,*,#11638,.T.);+#11638 = EDGE_CURVE('',#11616,#11639,#11641,.T.);+#11639 = VERTEX_POINT('',#11640);+#11640 = CARTESIAN_POINT('',(-0.394563134185,-7.78526278561E-02,+ 1.7000001));+#11641 = SURFACE_CURVE('',#11642,(#11646,#11653),.PCURVE_S1.);+#11642 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#11643,#11644,#11645),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#11643 = CARTESIAN_POINT('',(-0.421063108708,-6.718101649404E-02,+ 1.7000001));+#11644 = CARTESIAN_POINT('',(-0.407884743,-7.434317177059E-02,1.7000001)+ );+#11645 = CARTESIAN_POINT('',(-0.394563134185,-7.78526278561E-02,+ 1.7000001));+#11646 = PCURVE('',#11302,#11647);+#11647 = DEFINITIONAL_REPRESENTATION('',(#11648),#11652);+#11648 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#11649,#11650,#11651),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#11649 = CARTESIAN_POINT('',(2.048376409093E-02,3.437834532744E-02));+#11650 = CARTESIAN_POINT('',(3.366212979979E-02,2.721619005089E-02));+#11651 = CARTESIAN_POINT('',(4.698373861417E-02,2.370673396538E-02));+#11652 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11653 = PCURVE('',#5427,#11654);+#11654 = DEFINITIONAL_REPRESENTATION('',(#11655),#11659);+#11655 = LINE('',#11656,#11657);+#11656 = CARTESIAN_POINT('',(0.,-0.1));+#11657 = VECTOR('',#11658,1.);+#11658 = DIRECTION('',(1.,0.));+#11659 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11660 = ORIENTED_EDGE('',*,*,#11661,.T.);+#11661 = EDGE_CURVE('',#11639,#11662,#11664,.T.);+#11662 = VERTEX_POINT('',#11663);+#11663 = CARTESIAN_POINT('',(-0.367346944134,-8.136208394161E-02,+ 1.7000001));+#11664 = SURFACE_CURVE('',#11665,(#11669,#11676),.PCURVE_S1.);+#11665 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#11666,#11667,#11668),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#11666 = CARTESIAN_POINT('',(-0.394563134185,-7.78526278561E-02,+ 1.7000001));+#11667 = CARTESIAN_POINT('',(-0.381241525371,-8.136208394161E-02,+ 1.7000001));+#11668 = CARTESIAN_POINT('',(-0.367346944134,-8.136208394161E-02,+ 1.7000001));+#11669 = PCURVE('',#11302,#11670);+#11670 = DEFINITIONAL_REPRESENTATION('',(#11671),#11675);+#11671 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#11672,#11673,#11674),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#11672 = CARTESIAN_POINT('',(4.698373861417E-02,2.370673396538E-02));+#11673 = CARTESIAN_POINT('',(6.030534742855E-02,2.019727787987E-02));+#11674 = CARTESIAN_POINT('',(7.419992866506E-02,2.019727787987E-02));+#11675 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11676 = PCURVE('',#5391,#11677);+#11677 = DEFINITIONAL_REPRESENTATION('',(#11678),#11682);+#11678 = LINE('',#11679,#11680);+#11679 = CARTESIAN_POINT('',(0.,-0.1));+#11680 = VECTOR('',#11681,1.);+#11681 = DIRECTION('',(1.,0.));+#11682 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11683 = ORIENTED_EDGE('',*,*,#11684,.T.);+#11684 = EDGE_CURVE('',#11662,#11685,#11687,.T.);+#11685 = VERTEX_POINT('',#11686);+#11686 = CARTESIAN_POINT('',(-0.33046184446,-6.875669065488E-02,+ 1.7000001));+#11687 = SURFACE_CURVE('',#11688,(#11692,#11699),.PCURVE_S1.);+#11688 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#11689,#11690,#11691),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#11689 = CARTESIAN_POINT('',(-0.367346944134,-8.136208394161E-02,+ 1.7000001));+#11690 = CARTESIAN_POINT('',(-0.343425345511,-8.136208394161E-02,+ 1.7000001));+#11691 = CARTESIAN_POINT('',(-0.33046184446,-6.875669065488E-02,+ 1.7000001));+#11692 = PCURVE('',#11302,#11693);+#11693 = DEFINITIONAL_REPRESENTATION('',(#11694),#11698);+#11694 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#11695,#11696,#11697),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#11695 = CARTESIAN_POINT('',(7.419992866506E-02,2.019727787987E-02));+#11696 = CARTESIAN_POINT('',(9.812152728874E-02,2.019727787987E-02));+#11697 = CARTESIAN_POINT('',(0.111085028339,3.28026711666E-02));+#11698 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11699 = PCURVE('',#5355,#11700);+#11700 = DEFINITIONAL_REPRESENTATION('',(#11701),#11705);+#11701 = LINE('',#11702,#11703);+#11702 = CARTESIAN_POINT('',(0.,-0.1));+#11703 = VECTOR('',#11704,1.);+#11704 = DIRECTION('',(1.,0.));+#11705 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11706 = ORIENTED_EDGE('',*,*,#11707,.T.);+#11707 = EDGE_CURVE('',#11685,#11708,#11710,.T.);+#11708 = VERTEX_POINT('',#11709);+#11709 = CARTESIAN_POINT('',(-0.317498343409,-3.294591427213E-02,+ 1.7000001));+#11710 = SURFACE_CURVE('',#11711,(#11715,#11722),.PCURVE_S1.);+#11711 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#11712,#11713,#11714),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#11712 = CARTESIAN_POINT('',(-0.33046184446,-6.875669065488E-02,+ 1.7000001));+#11713 = CARTESIAN_POINT('',(-0.317498343409,-5.615129736815E-02,+ 1.7000001));+#11714 = CARTESIAN_POINT('',(-0.317498343409,-3.294591427213E-02,+ 1.7000001));+#11715 = PCURVE('',#11302,#11716);+#11716 = DEFINITIONAL_REPRESENTATION('',(#11717),#11721);+#11717 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#11718,#11719,#11720),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#11718 = CARTESIAN_POINT('',(0.111085028339,3.28026711666E-02));+#11719 = CARTESIAN_POINT('',(0.12404852939,4.540806445333E-02));+#11720 = CARTESIAN_POINT('',(0.12404852939,6.861344754935E-02));+#11721 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11722 = PCURVE('',#5319,#11723);+#11723 = DEFINITIONAL_REPRESENTATION('',(#11724),#11728);+#11724 = LINE('',#11725,#11726);+#11725 = CARTESIAN_POINT('',(0.,-0.1));+#11726 = VECTOR('',#11727,1.);+#11727 = DIRECTION('',(1.,0.));+#11728 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11729 = ORIENTED_EDGE('',*,*,#11730,.T.);+#11730 = EDGE_CURVE('',#11708,#11731,#11733,.T.);+#11731 = VERTEX_POINT('',#11732);+#11732 = CARTESIAN_POINT('',(-0.330891573777,2.721619005089E-03,+ 1.7000001));+#11733 = SURFACE_CURVE('',#11734,(#11738,#11745),.PCURVE_S1.);+#11734 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#11735,#11736,#11737),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#11735 = CARTESIAN_POINT('',(-0.317498343409,-3.294591427213E-02,+ 1.7000001));+#11736 = CARTESIAN_POINT('',(-0.317498343409,-1.002701738717E-02,+ 1.7000001));+#11737 = CARTESIAN_POINT('',(-0.330891573777,2.721619005089E-03,+ 1.7000001));+#11738 = PCURVE('',#11302,#11739);+#11739 = DEFINITIONAL_REPRESENTATION('',(#11740),#11744);+#11740 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#11741,#11742,#11743),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#11741 = CARTESIAN_POINT('',(0.12404852939,6.861344754935E-02));+#11742 = CARTESIAN_POINT('',(0.12404852939,9.153234443431E-02));+#11743 = CARTESIAN_POINT('',(0.110655299023,0.104280980827));+#11744 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11745 = PCURVE('',#5280,#11746);+#11746 = DEFINITIONAL_REPRESENTATION('',(#11747),#11751);+#11747 = LINE('',#11748,#11749);+#11748 = CARTESIAN_POINT('',(0.,-0.1));+#11749 = VECTOR('',#11750,1.);+#11750 = DIRECTION('',(1.,0.));+#11751 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11752 = ORIENTED_EDGE('',*,*,#11753,.T.);+#11753 = EDGE_CURVE('',#11731,#11754,#11756,.T.);+#11754 = VERTEX_POINT('',#11755);+#11755 = CARTESIAN_POINT('',(-0.368206402767,1.547025539735E-02,+ 1.7000001));+#11756 = SURFACE_CURVE('',#11757,(#11761,#11768),.PCURVE_S1.);+#11757 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#11758,#11759,#11760),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#11758 = CARTESIAN_POINT('',(-0.330891573777,2.721619005089E-03,+ 1.7000001));+#11759 = CARTESIAN_POINT('',(-0.344284804144,1.547025539735E-02,+ 1.7000001));+#11760 = CARTESIAN_POINT('',(-0.368206402767,1.547025539735E-02,+ 1.7000001));+#11761 = PCURVE('',#11302,#11762);+#11762 = DEFINITIONAL_REPRESENTATION('',(#11763),#11767);+#11763 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#11764,#11765,#11766),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#11764 = CARTESIAN_POINT('',(0.110655299023,0.104280980827));+#11765 = CARTESIAN_POINT('',(9.726206865555E-02,0.117029617219));+#11766 = CARTESIAN_POINT('',(7.334047003188E-02,0.117029617219));+#11767 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11768 = PCURVE('',#5238,#11769);+#11769 = DEFINITIONAL_REPRESENTATION('',(#11770),#11774);+#11770 = LINE('',#11771,#11772);+#11771 = CARTESIAN_POINT('',(0.,-0.1));+#11772 = VECTOR('',#11773,1.);+#11773 = DIRECTION('',(1.,0.));+#11774 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11775 = ORIENTED_EDGE('',*,*,#11776,.T.);+#11776 = EDGE_CURVE('',#11754,#11777,#11779,.T.);+#11777 = VERTEX_POINT('',#11778);+#11778 = CARTESIAN_POINT('',(-0.390838813441,1.282025794503E-02,+ 1.7000001));+#11779 = SURFACE_CURVE('',#11780,(#11784,#11791),.PCURVE_S1.);+#11780 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#11781,#11782,#11783),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#11781 = CARTESIAN_POINT('',(-0.368206402767,1.547025539735E-02,+ 1.7000001));+#11782 = CARTESIAN_POINT('',(-0.379809094315,1.547025539735E-02,+ 1.7000001));+#11783 = CARTESIAN_POINT('',(-0.390838813441,1.282025794503E-02,+ 1.7000001));+#11784 = PCURVE('',#11302,#11785);+#11785 = DEFINITIONAL_REPRESENTATION('',(#11786),#11790);+#11786 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#11787,#11788,#11789),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#11787 = CARTESIAN_POINT('',(7.334047003188E-02,0.117029617219));+#11788 = CARTESIAN_POINT('',(6.173777848386E-02,0.117029617219));+#11789 = CARTESIAN_POINT('',(5.070805935798E-02,0.114379619767));+#11790 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11791 = PCURVE('',#5202,#11792);+#11792 = DEFINITIONAL_REPRESENTATION('',(#11793),#11797);+#11793 = LINE('',#11794,#11795);+#11794 = CARTESIAN_POINT('',(0.,-0.1));+#11795 = VECTOR('',#11796,1.);+#11796 = DIRECTION('',(1.,0.));+#11797 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11798 = ORIENTED_EDGE('',*,*,#11799,.T.);+#11799 = EDGE_CURVE('',#11777,#11339,#11800,.T.);+#11800 = SURFACE_CURVE('',#11801,(#11805,#11812),.PCURVE_S1.);+#11801 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#11802,#11803,#11804),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#11802 = CARTESIAN_POINT('',(-0.390838813441,1.282025794503E-02,+ 1.7000001));+#11803 = CARTESIAN_POINT('',(-0.401868532567,1.01702604927E-02,1.7000001+ ));+#11804 = CARTESIAN_POINT('',(-0.411895549954,4.870265588054E-03,+ 1.7000001));+#11805 = PCURVE('',#11302,#11806);+#11806 = DEFINITIONAL_REPRESENTATION('',(#11807),#11811);+#11807 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#11808,#11809,#11810),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#11808 = CARTESIAN_POINT('',(5.070805935798E-02,0.114379619767));+#11809 = CARTESIAN_POINT('',(3.967834023209E-02,0.111729622314));+#11810 = CARTESIAN_POINT('',(2.965132284492E-02,0.10642962741));+#11811 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11812 = PCURVE('',#5166,#11813);+#11813 = DEFINITIONAL_REPRESENTATION('',(#11814),#11818);+#11814 = LINE('',#11815,#11816);+#11815 = CARTESIAN_POINT('',(0.,-0.1));+#11816 = VECTOR('',#11817,1.);+#11817 = DIRECTION('',(1.,0.));+#11818 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11819 = ADVANCED_FACE('',(#11820),#5819,.T.);+#11820 = FACE_BOUND('',#11821,.T.);+#11821 = EDGE_LOOP('',(#11822,#11823,#11824,#11825));+#11822 = ORIENTED_EDGE('',*,*,#5803,.T.);+#11823 = ORIENTED_EDGE('',*,*,#11314,.T.);+#11824 = ORIENTED_EDGE('',*,*,#11385,.T.);+#11825 = ORIENTED_EDGE('',*,*,#11826,.F.);+#11826 = EDGE_CURVE('',#5777,#11386,#11827,.T.);+#11827 = SURFACE_CURVE('',#11828,(#11832,#11839),.PCURVE_S1.);+#11828 = LINE('',#11829,#11830);+#11829 = CARTESIAN_POINT('',(-0.385538818537,8.795126679604E-02,+ 1.8000001));+#11830 = VECTOR('',#11831,1.);+#11831 = DIRECTION('',(-0.,-0.,-1.));+#11832 = PCURVE('',#5819,#11833);+#11833 = DEFINITIONAL_REPRESENTATION('',(#11834),#11838);+#11834 = LINE('',#11835,#11836);+#11835 = CARTESIAN_POINT('',(8.193505636374E-02,0.));+#11836 = VECTOR('',#11837,1.);+#11837 = DIRECTION('',(0.,-1.));+#11838 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11839 = PCURVE('',#5792,#11840);+#11840 = DEFINITIONAL_REPRESENTATION('',(#11841),#11845);+#11841 = LINE('',#11842,#11843);+#11842 = CARTESIAN_POINT('',(0.,0.));+#11843 = VECTOR('',#11844,1.);+#11844 = DIRECTION('',(0.,-1.));+#11845 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11846 = ADVANCED_FACE('',(#11847),#5792,.T.);+#11847 = FACE_BOUND('',#11848,.T.);+#11848 = EDGE_LOOP('',(#11849,#11850,#11851,#11852));+#11849 = ORIENTED_EDGE('',*,*,#5776,.T.);+#11850 = ORIENTED_EDGE('',*,*,#11826,.T.);+#11851 = ORIENTED_EDGE('',*,*,#11408,.T.);+#11852 = ORIENTED_EDGE('',*,*,#11853,.F.);+#11853 = EDGE_CURVE('',#5741,#11409,#11854,.T.);+#11854 = SURFACE_CURVE('',#11855,(#11859,#11866),.PCURVE_S1.);+#11855 = LINE('',#11856,#11857);+#11856 = CARTESIAN_POINT('',(-0.385538818537,3.538104706616E-02,+ 1.8000001));+#11857 = VECTOR('',#11858,1.);+#11858 = DIRECTION('',(-0.,-0.,-1.));+#11859 = PCURVE('',#5792,#11860);+#11860 = DEFINITIONAL_REPRESENTATION('',(#11861),#11865);+#11861 = LINE('',#11862,#11863);+#11862 = CARTESIAN_POINT('',(5.257021972988E-02,0.));+#11863 = VECTOR('',#11864,1.);+#11864 = DIRECTION('',(0.,-1.));+#11865 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11866 = PCURVE('',#5760,#11867);+#11867 = DEFINITIONAL_REPRESENTATION('',(#11868),#11872);+#11868 = LINE('',#11869,#11870);+#11869 = CARTESIAN_POINT('',(0.,0.));+#11870 = VECTOR('',#11871,1.);+#11871 = DIRECTION('',(0.,-1.));+#11872 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11873 = ADVANCED_FACE('',(#11874),#5760,.T.);+#11874 = FACE_BOUND('',#11875,.T.);+#11875 = EDGE_LOOP('',(#11876,#11877,#11878,#11879));+#11876 = ORIENTED_EDGE('',*,*,#5740,.T.);+#11877 = ORIENTED_EDGE('',*,*,#11853,.T.);+#11878 = ORIENTED_EDGE('',*,*,#11431,.T.);+#11879 = ORIENTED_EDGE('',*,*,#11880,.F.);+#11880 = EDGE_CURVE('',#5705,#11432,#11881,.T.);+#11881 = SURFACE_CURVE('',#11882,(#11886,#11893),.PCURVE_S1.);+#11882 = LINE('',#11883,#11884);+#11883 = CARTESIAN_POINT('',(-0.373148289908,3.874726004614E-02,+ 1.8000001));+#11884 = VECTOR('',#11885,1.);+#11885 = DIRECTION('',(-0.,-0.,-1.));+#11886 = PCURVE('',#5760,#11887);+#11887 = DEFINITIONAL_REPRESENTATION('',(#11888),#11892);+#11888 = LINE('',#11889,#11890);+#11889 = CARTESIAN_POINT('',(1.,0.));+#11890 = VECTOR('',#11891,1.);+#11891 = DIRECTION('',(0.,-1.));+#11892 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11893 = PCURVE('',#5724,#11894);+#11894 = DEFINITIONAL_REPRESENTATION('',(#11895),#11899);+#11895 = LINE('',#11896,#11897);+#11896 = CARTESIAN_POINT('',(0.,0.));+#11897 = VECTOR('',#11898,1.);+#11898 = DIRECTION('',(0.,-1.));+#11899 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11900 = ADVANCED_FACE('',(#11901),#5724,.T.);+#11901 = FACE_BOUND('',#11902,.T.);+#11902 = EDGE_LOOP('',(#11903,#11904,#11905,#11906));+#11903 = ORIENTED_EDGE('',*,*,#5704,.T.);+#11904 = ORIENTED_EDGE('',*,*,#11880,.T.);+#11905 = ORIENTED_EDGE('',*,*,#11454,.T.);+#11906 = ORIENTED_EDGE('',*,*,#11907,.F.);+#11907 = EDGE_CURVE('',#5660,#11455,#11908,.T.);+#11908 = SURFACE_CURVE('',#11909,(#11913,#11920),.PCURVE_S1.);+#11909 = LINE('',#11910,#11911);+#11910 = CARTESIAN_POINT('',(-0.360614518174,3.982158333762E-02,+ 1.8000001));+#11911 = VECTOR('',#11912,1.);+#11912 = DIRECTION('',(-0.,-0.,-1.));+#11913 = PCURVE('',#5724,#11914);+#11914 = DEFINITIONAL_REPRESENTATION('',(#11915),#11919);+#11915 = LINE('',#11916,#11917);+#11916 = CARTESIAN_POINT('',(1.,0.));+#11917 = VECTOR('',#11918,1.);+#11918 = DIRECTION('',(0.,-1.));+#11919 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11920 = PCURVE('',#5685,#11921);+#11921 = DEFINITIONAL_REPRESENTATION('',(#11922),#11926);+#11922 = LINE('',#11923,#11924);+#11923 = CARTESIAN_POINT('',(0.,0.));+#11924 = VECTOR('',#11925,1.);+#11925 = DIRECTION('',(0.,-1.));+#11926 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11927 = ADVANCED_FACE('',(#11928),#5685,.T.);+#11928 = FACE_BOUND('',#11929,.T.);+#11929 = EDGE_LOOP('',(#11930,#11931,#11932,#11933));+#11930 = ORIENTED_EDGE('',*,*,#5659,.T.);+#11931 = ORIENTED_EDGE('',*,*,#11907,.T.);+#11932 = ORIENTED_EDGE('',*,*,#11477,.T.);+#11933 = ORIENTED_EDGE('',*,*,#11934,.F.);+#11934 = EDGE_CURVE('',#5624,#11478,#11935,.T.);+#11935 = SURFACE_CURVE('',#11936,(#11940,#11947),.PCURVE_S1.);+#11936 = LINE('',#11937,#11938);+#11937 = CARTESIAN_POINT('',(-0.307901055339,2.019727787987E-02,+ 1.8000001));+#11938 = VECTOR('',#11939,1.);+#11939 = DIRECTION('',(-0.,-0.,-1.));+#11940 = PCURVE('',#5685,#11941);+#11941 = DEFINITIONAL_REPRESENTATION('',(#11942),#11946);+#11942 = LINE('',#11943,#11944);+#11943 = CARTESIAN_POINT('',(1.,0.));+#11944 = VECTOR('',#11945,1.);+#11945 = DIRECTION('',(0.,-1.));+#11946 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11947 = PCURVE('',#5643,#11948);+#11948 = DEFINITIONAL_REPRESENTATION('',(#11949),#11953);+#11949 = LINE('',#11950,#11951);+#11950 = CARTESIAN_POINT('',(0.,0.));+#11951 = VECTOR('',#11952,1.);+#11952 = DIRECTION('',(0.,-1.));+#11953 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11954 = ADVANCED_FACE('',(#11955),#5643,.T.);+#11955 = FACE_BOUND('',#11956,.T.);+#11956 = EDGE_LOOP('',(#11957,#11958,#11959,#11960));+#11957 = ORIENTED_EDGE('',*,*,#5623,.T.);+#11958 = ORIENTED_EDGE('',*,*,#11934,.T.);+#11959 = ORIENTED_EDGE('',*,*,#11500,.T.);+#11960 = ORIENTED_EDGE('',*,*,#11961,.F.);+#11961 = EDGE_CURVE('',#5579,#11501,#11962,.T.);+#11962 = SURFACE_CURVE('',#11963,(#11967,#11974),.PCURVE_S1.);+#11963 = LINE('',#11964,#11965);+#11964 = CARTESIAN_POINT('',(-0.288419992987,-3.294591427213E-02,+ 1.8000001));+#11965 = VECTOR('',#11966,1.);+#11966 = DIRECTION('',(-0.,-0.,-1.));+#11967 = PCURVE('',#5643,#11968);+#11968 = DEFINITIONAL_REPRESENTATION('',(#11969),#11973);+#11969 = LINE('',#11970,#11971);+#11970 = CARTESIAN_POINT('',(1.,0.));+#11971 = VECTOR('',#11972,1.);+#11972 = DIRECTION('',(0.,-1.));+#11973 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11974 = PCURVE('',#5604,#11975);+#11975 = DEFINITIONAL_REPRESENTATION('',(#11976),#11980);+#11976 = LINE('',#11977,#11978);+#11977 = CARTESIAN_POINT('',(0.,0.));+#11978 = VECTOR('',#11979,1.);+#11979 = DIRECTION('',(0.,-1.));+#11980 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11981 = ADVANCED_FACE('',(#11982),#5604,.T.);+#11982 = FACE_BOUND('',#11983,.T.);+#11983 = EDGE_LOOP('',(#11984,#11985,#11986,#11987));+#11984 = ORIENTED_EDGE('',*,*,#5578,.T.);+#11985 = ORIENTED_EDGE('',*,*,#11961,.T.);+#11986 = ORIENTED_EDGE('',*,*,#11523,.T.);+#11987 = ORIENTED_EDGE('',*,*,#11988,.F.);+#11988 = EDGE_CURVE('',#5543,#11524,#11989,.T.);+#11989 = SURFACE_CURVE('',#11990,(#11994,#12001),.PCURVE_S1.);+#11990 = LINE('',#11991,#11992);+#11991 = CARTESIAN_POINT('',(-0.308832135525,-8.623234952967E-02,+ 1.8000001));+#11992 = VECTOR('',#11993,1.);+#11993 = DIRECTION('',(-0.,-0.,-1.));+#11994 = PCURVE('',#5604,#11995);+#11995 = DEFINITIONAL_REPRESENTATION('',(#11996),#12000);+#11996 = LINE('',#11997,#11998);+#11997 = CARTESIAN_POINT('',(1.,0.));+#11998 = VECTOR('',#11999,1.);+#11999 = DIRECTION('',(0.,-1.));+#12000 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12001 = PCURVE('',#5562,#12002);+#12002 = DEFINITIONAL_REPRESENTATION('',(#12003),#12007);+#12003 = LINE('',#12004,#12005);+#12004 = CARTESIAN_POINT('',(0.,0.));+#12005 = VECTOR('',#12006,1.);+#12006 = DIRECTION('',(0.,-1.));+#12007 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12008 = ADVANCED_FACE('',(#12009),#5562,.T.);+#12009 = FACE_BOUND('',#12010,.T.);+#12010 = EDGE_LOOP('',(#12011,#12012,#12013,#12014));+#12011 = ORIENTED_EDGE('',*,*,#5542,.T.);+#12012 = ORIENTED_EDGE('',*,*,#11988,.T.);+#12013 = ORIENTED_EDGE('',*,*,#11546,.T.);+#12014 = ORIENTED_EDGE('',*,*,#12015,.F.);+#12015 = EDGE_CURVE('',#5507,#11547,#12016,.T.);+#12016 = SURFACE_CURVE('',#12017,(#12021,#12028),.PCURVE_S1.);+#12017 = LINE('',#12018,#12019);+#12018 = CARTESIAN_POINT('',(-0.364625325129,-0.105713411882,1.8000001)+ );+#12019 = VECTOR('',#12020,1.);+#12020 = DIRECTION('',(-0.,-0.,-1.));+#12021 = PCURVE('',#5562,#12022);+#12022 = DEFINITIONAL_REPRESENTATION('',(#12023),#12027);+#12023 = LINE('',#12024,#12025);+#12024 = CARTESIAN_POINT('',(1.,0.));+#12025 = VECTOR('',#12026,1.);+#12026 = DIRECTION('',(0.,-1.));+#12027 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12028 = PCURVE('',#5526,#12029);+#12029 = DEFINITIONAL_REPRESENTATION('',(#12030),#12034);+#12030 = LINE('',#12031,#12032);+#12031 = CARTESIAN_POINT('',(0.,0.));+#12032 = VECTOR('',#12033,1.);+#12033 = DIRECTION('',(0.,-1.));+#12034 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12035 = ADVANCED_FACE('',(#12036),#5526,.T.);+#12036 = FACE_BOUND('',#12037,.T.);+#12037 = EDGE_LOOP('',(#12038,#12039,#12040,#12041));+#12038 = ORIENTED_EDGE('',*,*,#5506,.T.);+#12039 = ORIENTED_EDGE('',*,*,#12015,.T.);+#12040 = ORIENTED_EDGE('',*,*,#11569,.T.);+#12041 = ORIENTED_EDGE('',*,*,#12042,.F.);+#12042 = EDGE_CURVE('',#5471,#11570,#12043,.T.);+#12043 = SURFACE_CURVE('',#12044,(#12048,#12055),.PCURVE_S1.);+#12044 = LINE('',#12045,#12046);+#12045 = CARTESIAN_POINT('',(-0.395780700582,-0.103421522193,1.8000001)+ );+#12046 = VECTOR('',#12047,1.);+#12047 = DIRECTION('',(-0.,-0.,-1.));+#12048 = PCURVE('',#5526,#12049);+#12049 = DEFINITIONAL_REPRESENTATION('',(#12050),#12054);+#12050 = LINE('',#12051,#12052);+#12051 = CARTESIAN_POINT('',(1.,0.));+#12052 = VECTOR('',#12053,1.);+#12053 = DIRECTION('',(0.,-1.));+#12054 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12055 = PCURVE('',#5490,#12056);+#12056 = DEFINITIONAL_REPRESENTATION('',(#12057),#12061);+#12057 = LINE('',#12058,#12059);+#12058 = CARTESIAN_POINT('',(0.,0.));+#12059 = VECTOR('',#12060,1.);+#12060 = DIRECTION('',(0.,-1.));+#12061 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12062 = ADVANCED_FACE('',(#12063),#5490,.T.);+#12063 = FACE_BOUND('',#12064,.T.);+#12064 = EDGE_LOOP('',(#12065,#12066,#12067,#12068));+#12065 = ORIENTED_EDGE('',*,*,#5470,.T.);+#12066 = ORIENTED_EDGE('',*,*,#12042,.T.);+#12067 = ORIENTED_EDGE('',*,*,#11592,.T.);+#12068 = ORIENTED_EDGE('',*,*,#12069,.F.);+#12069 = EDGE_CURVE('',#5444,#11593,#12070,.T.);+#12070 = SURFACE_CURVE('',#12071,(#12075,#12082),.PCURVE_S1.);+#12071 = LINE('',#12072,#12073);+#12072 = CARTESIAN_POINT('',(-0.421063108708,-9.65458531279E-02,+ 1.8000001));+#12073 = VECTOR('',#12074,1.);+#12074 = DIRECTION('',(-0.,-0.,-1.));+#12075 = PCURVE('',#5490,#12076);+#12076 = DEFINITIONAL_REPRESENTATION('',(#12077),#12081);+#12077 = LINE('',#12078,#12079);+#12078 = CARTESIAN_POINT('',(1.,0.));+#12079 = VECTOR('',#12080,1.);+#12080 = DIRECTION('',(0.,-1.));+#12081 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12082 = PCURVE('',#5459,#12083);+#12083 = DEFINITIONAL_REPRESENTATION('',(#12084),#12088);+#12084 = LINE('',#12085,#12086);+#12085 = CARTESIAN_POINT('',(0.,0.));+#12086 = VECTOR('',#12087,1.);+#12087 = DIRECTION('',(0.,-1.));+#12088 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12089 = ADVANCED_FACE('',(#12090),#5459,.T.);+#12090 = FACE_BOUND('',#12091,.T.);+#12091 = EDGE_LOOP('',(#12092,#12093,#12094,#12095));+#12092 = ORIENTED_EDGE('',*,*,#5443,.T.);+#12093 = ORIENTED_EDGE('',*,*,#12069,.T.);+#12094 = ORIENTED_EDGE('',*,*,#11615,.T.);+#12095 = ORIENTED_EDGE('',*,*,#12096,.F.);+#12096 = EDGE_CURVE('',#5408,#11616,#12097,.T.);+#12097 = SURFACE_CURVE('',#12098,(#12102,#12109),.PCURVE_S1.);+#12098 = LINE('',#12099,#12100);+#12099 = CARTESIAN_POINT('',(-0.421063108708,-6.718101649404E-02,+ 1.8000001));+#12100 = VECTOR('',#12101,1.);+#12101 = DIRECTION('',(-0.,-0.,-1.));+#12102 = PCURVE('',#5459,#12103);+#12103 = DEFINITIONAL_REPRESENTATION('',(#12104),#12108);+#12104 = LINE('',#12105,#12106);+#12105 = CARTESIAN_POINT('',(2.936483663386E-02,0.));+#12106 = VECTOR('',#12107,1.);+#12107 = DIRECTION('',(0.,-1.));+#12108 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12109 = PCURVE('',#5427,#12110);+#12110 = DEFINITIONAL_REPRESENTATION('',(#12111),#12115);+#12111 = LINE('',#12112,#12113);+#12112 = CARTESIAN_POINT('',(0.,0.));+#12113 = VECTOR('',#12114,1.);+#12114 = DIRECTION('',(0.,-1.));+#12115 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12116 = ADVANCED_FACE('',(#12117),#5427,.T.);+#12117 = FACE_BOUND('',#12118,.T.);+#12118 = EDGE_LOOP('',(#12119,#12120,#12121,#12122));+#12119 = ORIENTED_EDGE('',*,*,#5407,.T.);+#12120 = ORIENTED_EDGE('',*,*,#12096,.T.);+#12121 = ORIENTED_EDGE('',*,*,#11638,.T.);+#12122 = ORIENTED_EDGE('',*,*,#12123,.F.);+#12123 = EDGE_CURVE('',#5372,#11639,#12124,.T.);+#12124 = SURFACE_CURVE('',#12125,(#12129,#12136),.PCURVE_S1.);+#12125 = LINE('',#12126,#12127);+#12126 = CARTESIAN_POINT('',(-0.394563134185,-7.78526278561E-02,+ 1.8000001));+#12127 = VECTOR('',#12128,1.);+#12128 = DIRECTION('',(-0.,-0.,-1.));+#12129 = PCURVE('',#5427,#12130);+#12130 = DEFINITIONAL_REPRESENTATION('',(#12131),#12135);+#12131 = LINE('',#12132,#12133);+#12132 = CARTESIAN_POINT('',(1.,0.));+#12133 = VECTOR('',#12134,1.);+#12134 = DIRECTION('',(0.,-1.));+#12135 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12136 = PCURVE('',#5391,#12137);+#12137 = DEFINITIONAL_REPRESENTATION('',(#12138),#12142);+#12138 = LINE('',#12139,#12140);+#12139 = CARTESIAN_POINT('',(0.,0.));+#12140 = VECTOR('',#12141,1.);+#12141 = DIRECTION('',(0.,-1.));+#12142 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12143 = ADVANCED_FACE('',(#12144),#5391,.T.);+#12144 = FACE_BOUND('',#12145,.T.);+#12145 = EDGE_LOOP('',(#12146,#12147,#12148,#12149));+#12146 = ORIENTED_EDGE('',*,*,#5371,.T.);+#12147 = ORIENTED_EDGE('',*,*,#12123,.T.);+#12148 = ORIENTED_EDGE('',*,*,#11661,.T.);+#12149 = ORIENTED_EDGE('',*,*,#12150,.F.);+#12150 = EDGE_CURVE('',#5336,#11662,#12151,.T.);+#12151 = SURFACE_CURVE('',#12152,(#12156,#12163),.PCURVE_S1.);+#12152 = LINE('',#12153,#12154);+#12153 = CARTESIAN_POINT('',(-0.367346944134,-8.136208394161E-02,+ 1.8000001));+#12154 = VECTOR('',#12155,1.);+#12155 = DIRECTION('',(-0.,-0.,-1.));+#12156 = PCURVE('',#5391,#12157);+#12157 = DEFINITIONAL_REPRESENTATION('',(#12158),#12162);+#12158 = LINE('',#12159,#12160);+#12159 = CARTESIAN_POINT('',(1.,0.));+#12160 = VECTOR('',#12161,1.);+#12161 = DIRECTION('',(0.,-1.));+#12162 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12163 = PCURVE('',#5355,#12164);+#12164 = DEFINITIONAL_REPRESENTATION('',(#12165),#12169);+#12165 = LINE('',#12166,#12167);+#12166 = CARTESIAN_POINT('',(0.,0.));+#12167 = VECTOR('',#12168,1.);+#12168 = DIRECTION('',(0.,-1.));+#12169 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12170 = ADVANCED_FACE('',(#12171),#5355,.T.);+#12171 = FACE_BOUND('',#12172,.T.);+#12172 = EDGE_LOOP('',(#12173,#12174,#12175,#12176));+#12173 = ORIENTED_EDGE('',*,*,#5335,.T.);+#12174 = ORIENTED_EDGE('',*,*,#12150,.T.);+#12175 = ORIENTED_EDGE('',*,*,#11684,.T.);+#12176 = ORIENTED_EDGE('',*,*,#12177,.F.);+#12177 = EDGE_CURVE('',#5300,#11685,#12178,.T.);+#12178 = SURFACE_CURVE('',#12179,(#12183,#12190),.PCURVE_S1.);+#12179 = LINE('',#12180,#12181);+#12180 = CARTESIAN_POINT('',(-0.33046184446,-6.875669065488E-02,+ 1.8000001));+#12181 = VECTOR('',#12182,1.);+#12182 = DIRECTION('',(-0.,-0.,-1.));+#12183 = PCURVE('',#5355,#12184);+#12184 = DEFINITIONAL_REPRESENTATION('',(#12185),#12189);+#12185 = LINE('',#12186,#12187);+#12186 = CARTESIAN_POINT('',(1.,0.));+#12187 = VECTOR('',#12188,1.);+#12188 = DIRECTION('',(0.,-1.));+#12189 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12190 = PCURVE('',#5319,#12191);+#12191 = DEFINITIONAL_REPRESENTATION('',(#12192),#12196);+#12192 = LINE('',#12193,#12194);+#12193 = CARTESIAN_POINT('',(0.,0.));+#12194 = VECTOR('',#12195,1.);+#12195 = DIRECTION('',(0.,-1.));+#12196 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12197 = ADVANCED_FACE('',(#12198),#5319,.T.);+#12198 = FACE_BOUND('',#12199,.T.);+#12199 = EDGE_LOOP('',(#12200,#12201,#12202,#12203));+#12200 = ORIENTED_EDGE('',*,*,#5299,.T.);+#12201 = ORIENTED_EDGE('',*,*,#12177,.T.);+#12202 = ORIENTED_EDGE('',*,*,#11707,.T.);+#12203 = ORIENTED_EDGE('',*,*,#12204,.F.);+#12204 = EDGE_CURVE('',#5255,#11708,#12205,.T.);+#12205 = SURFACE_CURVE('',#12206,(#12210,#12217),.PCURVE_S1.);+#12206 = LINE('',#12207,#12208);+#12207 = CARTESIAN_POINT('',(-0.317498343409,-3.294591427213E-02,+ 1.8000001));+#12208 = VECTOR('',#12209,1.);+#12209 = DIRECTION('',(-0.,-0.,-1.));+#12210 = PCURVE('',#5319,#12211);+#12211 = DEFINITIONAL_REPRESENTATION('',(#12212),#12216);+#12212 = LINE('',#12213,#12214);+#12213 = CARTESIAN_POINT('',(1.,0.));+#12214 = VECTOR('',#12215,1.);+#12215 = DIRECTION('',(0.,-1.));+#12216 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12217 = PCURVE('',#5280,#12218);+#12218 = DEFINITIONAL_REPRESENTATION('',(#12219),#12223);+#12219 = LINE('',#12220,#12221);+#12220 = CARTESIAN_POINT('',(0.,0.));+#12221 = VECTOR('',#12222,1.);+#12222 = DIRECTION('',(0.,-1.));+#12223 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12224 = ADVANCED_FACE('',(#12225),#5280,.T.);+#12225 = FACE_BOUND('',#12226,.T.);+#12226 = EDGE_LOOP('',(#12227,#12228,#12229,#12230));+#12227 = ORIENTED_EDGE('',*,*,#5254,.T.);+#12228 = ORIENTED_EDGE('',*,*,#12204,.T.);+#12229 = ORIENTED_EDGE('',*,*,#11730,.T.);+#12230 = ORIENTED_EDGE('',*,*,#12231,.F.);+#12231 = EDGE_CURVE('',#5219,#11731,#12232,.T.);+#12232 = SURFACE_CURVE('',#12233,(#12237,#12244),.PCURVE_S1.);+#12233 = LINE('',#12234,#12235);+#12234 = CARTESIAN_POINT('',(-0.330891573777,2.721619005089E-03,+ 1.8000001));+#12235 = VECTOR('',#12236,1.);+#12236 = DIRECTION('',(-0.,-0.,-1.));+#12237 = PCURVE('',#5280,#12238);+#12238 = DEFINITIONAL_REPRESENTATION('',(#12239),#12243);+#12239 = LINE('',#12240,#12241);+#12240 = CARTESIAN_POINT('',(1.,0.));+#12241 = VECTOR('',#12242,1.);+#12242 = DIRECTION('',(0.,-1.));+#12243 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12244 = PCURVE('',#5238,#12245);+#12245 = DEFINITIONAL_REPRESENTATION('',(#12246),#12250);+#12246 = LINE('',#12247,#12248);+#12247 = CARTESIAN_POINT('',(0.,0.));+#12248 = VECTOR('',#12249,1.);+#12249 = DIRECTION('',(0.,-1.));+#12250 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12251 = ADVANCED_FACE('',(#12252),#5238,.T.);+#12252 = FACE_BOUND('',#12253,.T.);+#12253 = EDGE_LOOP('',(#12254,#12255,#12256,#12257));+#12254 = ORIENTED_EDGE('',*,*,#5218,.T.);+#12255 = ORIENTED_EDGE('',*,*,#12231,.T.);+#12256 = ORIENTED_EDGE('',*,*,#11753,.T.);+#12257 = ORIENTED_EDGE('',*,*,#12258,.F.);+#12258 = EDGE_CURVE('',#5183,#11754,#12259,.T.);+#12259 = SURFACE_CURVE('',#12260,(#12264,#12271),.PCURVE_S1.);+#12260 = LINE('',#12261,#12262);+#12261 = CARTESIAN_POINT('',(-0.368206402767,1.547025539735E-02,+ 1.8000001));+#12262 = VECTOR('',#12263,1.);+#12263 = DIRECTION('',(-0.,-0.,-1.));+#12264 = PCURVE('',#5238,#12265);+#12265 = DEFINITIONAL_REPRESENTATION('',(#12266),#12270);+#12266 = LINE('',#12267,#12268);+#12267 = CARTESIAN_POINT('',(1.,0.));+#12268 = VECTOR('',#12269,1.);+#12269 = DIRECTION('',(0.,-1.));+#12270 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12271 = PCURVE('',#5202,#12272);+#12272 = DEFINITIONAL_REPRESENTATION('',(#12273),#12277);+#12273 = LINE('',#12274,#12275);+#12274 = CARTESIAN_POINT('',(0.,0.));+#12275 = VECTOR('',#12276,1.);+#12276 = DIRECTION('',(0.,-1.));+#12277 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12278 = ADVANCED_FACE('',(#12279),#5202,.T.);+#12279 = FACE_BOUND('',#12280,.T.);+#12280 = EDGE_LOOP('',(#12281,#12282,#12283,#12284));+#12281 = ORIENTED_EDGE('',*,*,#5182,.T.);+#12282 = ORIENTED_EDGE('',*,*,#12258,.T.);+#12283 = ORIENTED_EDGE('',*,*,#11776,.T.);+#12284 = ORIENTED_EDGE('',*,*,#12285,.F.);+#12285 = EDGE_CURVE('',#5147,#11777,#12286,.T.);+#12286 = SURFACE_CURVE('',#12287,(#12291,#12298),.PCURVE_S1.);+#12287 = LINE('',#12288,#12289);+#12288 = CARTESIAN_POINT('',(-0.390838813441,1.282025794503E-02,+ 1.8000001));+#12289 = VECTOR('',#12290,1.);+#12290 = DIRECTION('',(-0.,-0.,-1.));+#12291 = PCURVE('',#5202,#12292);+#12292 = DEFINITIONAL_REPRESENTATION('',(#12293),#12297);+#12293 = LINE('',#12294,#12295);+#12294 = CARTESIAN_POINT('',(1.,0.));+#12295 = VECTOR('',#12296,1.);+#12296 = DIRECTION('',(0.,-1.));+#12297 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12298 = PCURVE('',#5166,#12299);+#12299 = DEFINITIONAL_REPRESENTATION('',(#12300),#12304);+#12300 = LINE('',#12301,#12302);+#12301 = CARTESIAN_POINT('',(0.,0.));+#12302 = VECTOR('',#12303,1.);+#12303 = DIRECTION('',(0.,-1.));+#12304 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12305 = ADVANCED_FACE('',(#12306),#5166,.T.);+#12306 = FACE_BOUND('',#12307,.T.);+#12307 = EDGE_LOOP('',(#12308,#12309,#12310,#12311));+#12308 = ORIENTED_EDGE('',*,*,#5146,.T.);+#12309 = ORIENTED_EDGE('',*,*,#12285,.T.);+#12310 = ORIENTED_EDGE('',*,*,#11799,.T.);+#12311 = ORIENTED_EDGE('',*,*,#12312,.F.);+#12312 = EDGE_CURVE('',#5120,#11339,#12313,.T.);+#12313 = SURFACE_CURVE('',#12314,(#12318,#12325),.PCURVE_S1.);+#12314 = LINE('',#12315,#12316);+#12315 = CARTESIAN_POINT('',(-0.411895549954,4.870265588054E-03,+ 1.8000001));+#12316 = VECTOR('',#12317,1.);+#12317 = DIRECTION('',(-0.,-0.,-1.));+#12318 = PCURVE('',#5166,#12319);+#12319 = DEFINITIONAL_REPRESENTATION('',(#12320),#12324);+#12320 = LINE('',#12321,#12322);+#12321 = CARTESIAN_POINT('',(1.,0.));+#12322 = VECTOR('',#12323,1.);+#12323 = DIRECTION('',(0.,-1.));+#12324 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12325 = PCURVE('',#5135,#12326);+#12326 = DEFINITIONAL_REPRESENTATION('',(#12327),#12331);+#12327 = LINE('',#12328,#12329);+#12328 = CARTESIAN_POINT('',(0.,0.));+#12329 = VECTOR('',#12330,1.);+#12330 = DIRECTION('',(0.,-1.));+#12331 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12332 = ADVANCED_FACE('',(#12333),#5135,.T.);+#12333 = FACE_BOUND('',#12334,.T.);+#12334 = EDGE_LOOP('',(#12335,#12336,#12337,#12338));+#12335 = ORIENTED_EDGE('',*,*,#5119,.T.);+#12336 = ORIENTED_EDGE('',*,*,#12312,.T.);+#12337 = ORIENTED_EDGE('',*,*,#11338,.T.);+#12338 = ORIENTED_EDGE('',*,*,#12339,.F.);+#12339 = EDGE_CURVE('',#5093,#11341,#12340,.T.);+#12340 = SURFACE_CURVE('',#12341,(#12345,#12352),.PCURVE_S1.);+#12341 = LINE('',#12342,#12343);+#12342 = CARTESIAN_POINT('',(-0.411895549954,0.112302594736,1.8000001));+#12343 = VECTOR('',#12344,1.);+#12344 = DIRECTION('',(-0.,-0.,-1.));+#12345 = PCURVE('',#5135,#12346);+#12346 = DEFINITIONAL_REPRESENTATION('',(#12347),#12351);+#12347 = LINE('',#12348,#12349);+#12348 = CARTESIAN_POINT('',(0.107432329148,0.));+#12349 = VECTOR('',#12350,1.);+#12350 = DIRECTION('',(0.,-1.));+#12351 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12352 = PCURVE('',#5108,#12353);+#12353 = DEFINITIONAL_REPRESENTATION('',(#12354),#12358);+#12354 = LINE('',#12355,#12356);+#12355 = CARTESIAN_POINT('',(0.,0.));+#12356 = VECTOR('',#12357,1.);+#12357 = DIRECTION('',(0.,-1.));+#12358 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12359 = ADVANCED_FACE('',(#12360),#5108,.T.);+#12360 = FACE_BOUND('',#12361,.T.);+#12361 = EDGE_LOOP('',(#12362,#12363,#12364,#12365));+#12362 = ORIENTED_EDGE('',*,*,#5090,.T.);+#12363 = ORIENTED_EDGE('',*,*,#12339,.T.);+#12364 = ORIENTED_EDGE('',*,*,#11363,.T.);+#12365 = ORIENTED_EDGE('',*,*,#11263,.F.);+#12366 = ADVANCED_FACE('',(#12367),#5077,.T.);+#12367 = FACE_BOUND('',#12368,.T.);+#12368 = EDGE_LOOP('',(#12369,#12370,#12393,#12421));+#12369 = ORIENTED_EDGE('',*,*,#5063,.T.);+#12370 = ORIENTED_EDGE('',*,*,#12371,.T.);+#12371 = EDGE_CURVE('',#4765,#12372,#12374,.T.);+#12372 = VERTEX_POINT('',#12373);+#12373 = CARTESIAN_POINT('',(-0.216225467799,0.112302594736,1.7000001));+#12374 = SURFACE_CURVE('',#12375,(#12379,#12386),.PCURVE_S1.);+#12375 = LINE('',#12376,#12377);+#12376 = CARTESIAN_POINT('',(-0.216225467799,0.112302594736,1.8000001));+#12377 = VECTOR('',#12378,1.);+#12378 = DIRECTION('',(-0.,-0.,-1.));+#12379 = PCURVE('',#5077,#12380);+#12380 = DEFINITIONAL_REPRESENTATION('',(#12381),#12385);+#12381 = LINE('',#12382,#12383);+#12382 = CARTESIAN_POINT('',(0.,0.));+#12383 = VECTOR('',#12384,1.);+#12384 = DIRECTION('',(0.,-1.));+#12385 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12386 = PCURVE('',#4782,#12387);+#12387 = DEFINITIONAL_REPRESENTATION('',(#12388),#12392);+#12388 = LINE('',#12389,#12390);+#12389 = CARTESIAN_POINT('',(2.907835042279E-02,0.));+#12390 = VECTOR('',#12391,1.);+#12391 = DIRECTION('',(0.,-1.));+#12392 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12393 = ORIENTED_EDGE('',*,*,#12394,.T.);+#12394 = EDGE_CURVE('',#12372,#12395,#12397,.T.);+#12395 = VERTEX_POINT('',#12396);+#12396 = CARTESIAN_POINT('',(-0.216225467799,2.463781415133E-02,+ 1.7000001));+#12397 = SURFACE_CURVE('',#12398,(#12402,#12409),.PCURVE_S1.);+#12398 = LINE('',#12399,#12400);+#12399 = CARTESIAN_POINT('',(-0.216225467799,0.112302594736,1.7000001));+#12400 = VECTOR('',#12401,1.);+#12401 = DIRECTION('',(0.,-1.,0.));+#12402 = PCURVE('',#5077,#12403);+#12403 = DEFINITIONAL_REPRESENTATION('',(#12404),#12408);+#12404 = LINE('',#12405,#12406);+#12405 = CARTESIAN_POINT('',(0.,-0.1));+#12406 = VECTOR('',#12407,1.);+#12407 = DIRECTION('',(1.,0.));+#12408 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12409 = PCURVE('',#12410,#12415);+#12410 = PLANE('',#12411);+#12411 = AXIS2_PLACEMENT_3D('',#12412,#12413,#12414);+#12412 = CARTESIAN_POINT('',(-0.26492812368,-0.101559361821,1.7000001));+#12413 = DIRECTION('',(0.,0.,1.));+#12414 = DIRECTION('',(1.,0.,0.));+#12415 = DEFINITIONAL_REPRESENTATION('',(#12416),#12420);+#12416 = LINE('',#12417,#12418);+#12417 = CARTESIAN_POINT('',(4.870265588054E-02,0.213861956558));+#12418 = VECTOR('',#12419,1.);+#12419 = DIRECTION('',(0.,-1.));+#12420 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12421 = ORIENTED_EDGE('',*,*,#12422,.F.);+#12422 = EDGE_CURVE('',#5037,#12395,#12423,.T.);+#12423 = SURFACE_CURVE('',#12424,(#12428,#12435),.PCURVE_S1.);+#12424 = LINE('',#12425,#12426);+#12425 = CARTESIAN_POINT('',(-0.216225467799,2.463781415133E-02,+ 1.8000001));+#12426 = VECTOR('',#12427,1.);+#12427 = DIRECTION('',(-0.,-0.,-1.));+#12428 = PCURVE('',#5077,#12429);+#12429 = DEFINITIONAL_REPRESENTATION('',(#12430),#12434);+#12430 = LINE('',#12431,#12432);+#12431 = CARTESIAN_POINT('',(8.766478058498E-02,0.));+#12432 = VECTOR('',#12433,1.);+#12433 = DIRECTION('',(0.,-1.));+#12434 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12435 = PCURVE('',#5052,#12436);+#12436 = DEFINITIONAL_REPRESENTATION('',(#12437),#12441);+#12437 = LINE('',#12438,#12439);+#12438 = CARTESIAN_POINT('',(0.,0.));+#12439 = VECTOR('',#12440,1.);+#12440 = DIRECTION('',(0.,-1.));+#12441 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12442 = ADVANCED_FACE('',(#12443),#12410,.T.);+#12443 = FACE_BOUND('',#12444,.F.);+#12444 = EDGE_LOOP('',(#12445,#12470,#12491,#12492,#12515,#12538,#12561,+ #12584,#12607,#12630,#12653,#12676));+#12445 = ORIENTED_EDGE('',*,*,#12446,.T.);+#12446 = EDGE_CURVE('',#12447,#12449,#12451,.T.);+#12447 = VERTEX_POINT('',#12448);+#12448 = CARTESIAN_POINT('',(-0.245303818222,-0.101559361821,1.7000001)+ );+#12449 = VERTEX_POINT('',#12450);+#12450 = CARTESIAN_POINT('',(-0.245303818222,0.112302594736,1.7000001));+#12451 = SURFACE_CURVE('',#12452,(#12456,#12463),.PCURVE_S1.);+#12452 = LINE('',#12453,#12454);+#12453 = CARTESIAN_POINT('',(-0.245303818222,-0.101559361821,1.7000001)+ );+#12454 = VECTOR('',#12455,1.);+#12455 = DIRECTION('',(0.,1.,0.));+#12456 = PCURVE('',#12410,#12457);+#12457 = DEFINITIONAL_REPRESENTATION('',(#12458),#12462);+#12458 = LINE('',#12459,#12460);+#12459 = CARTESIAN_POINT('',(1.962430545775E-02,0.));+#12460 = VECTOR('',#12461,1.);+#12461 = DIRECTION('',(0.,1.));+#12462 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12463 = PCURVE('',#4809,#12464);+#12464 = DEFINITIONAL_REPRESENTATION('',(#12465),#12469);+#12465 = LINE('',#12466,#12467);+#12466 = CARTESIAN_POINT('',(0.,-0.1));+#12467 = VECTOR('',#12468,1.);+#12468 = DIRECTION('',(1.,0.));+#12469 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12470 = ORIENTED_EDGE('',*,*,#12471,.T.);+#12471 = EDGE_CURVE('',#12449,#12372,#12472,.T.);+#12472 = SURFACE_CURVE('',#12473,(#12477,#12484),.PCURVE_S1.);+#12473 = LINE('',#12474,#12475);+#12474 = CARTESIAN_POINT('',(-0.245303818222,0.112302594736,1.7000001));+#12475 = VECTOR('',#12476,1.);+#12476 = DIRECTION('',(1.,0.,0.));+#12477 = PCURVE('',#12410,#12478);+#12478 = DEFINITIONAL_REPRESENTATION('',(#12479),#12483);+#12479 = LINE('',#12480,#12481);+#12480 = CARTESIAN_POINT('',(1.962430545775E-02,0.213861956558));+#12481 = VECTOR('',#12482,1.);+#12482 = DIRECTION('',(1.,0.));+#12483 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12484 = PCURVE('',#4782,#12485);+#12485 = DEFINITIONAL_REPRESENTATION('',(#12486),#12490);+#12486 = LINE('',#12487,#12488);+#12487 = CARTESIAN_POINT('',(0.,-0.1));+#12488 = VECTOR('',#12489,1.);+#12489 = DIRECTION('',(1.,0.));+#12490 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12491 = ORIENTED_EDGE('',*,*,#12394,.T.);+#12492 = ORIENTED_EDGE('',*,*,#12493,.T.);+#12493 = EDGE_CURVE('',#12395,#12494,#12496,.T.);+#12494 = VERTEX_POINT('',#12495);+#12495 = CARTESIAN_POINT('',(-0.13701203044,2.463781415133E-02,1.7000001+ ));+#12496 = SURFACE_CURVE('',#12497,(#12501,#12508),.PCURVE_S1.);+#12497 = LINE('',#12498,#12499);+#12498 = CARTESIAN_POINT('',(-0.216225467799,2.463781415133E-02,+ 1.7000001));+#12499 = VECTOR('',#12500,1.);+#12500 = DIRECTION('',(1.,0.,0.));+#12501 = PCURVE('',#12410,#12502);+#12502 = DEFINITIONAL_REPRESENTATION('',(#12503),#12507);+#12503 = LINE('',#12504,#12505);+#12504 = CARTESIAN_POINT('',(4.870265588054E-02,0.126197175973));+#12505 = VECTOR('',#12506,1.);+#12506 = DIRECTION('',(1.,0.));+#12507 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12508 = PCURVE('',#5052,#12509);+#12509 = DEFINITIONAL_REPRESENTATION('',(#12510),#12514);+#12510 = LINE('',#12511,#12512);+#12511 = CARTESIAN_POINT('',(0.,-0.1));+#12512 = VECTOR('',#12513,1.);+#12513 = DIRECTION('',(1.,0.));+#12514 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12515 = ORIENTED_EDGE('',*,*,#12516,.T.);+#12516 = EDGE_CURVE('',#12494,#12517,#12519,.T.);+#12517 = VERTEX_POINT('',#12518);+#12518 = CARTESIAN_POINT('',(-0.13701203044,0.112302594736,1.7000001));+#12519 = SURFACE_CURVE('',#12520,(#12524,#12531),.PCURVE_S1.);+#12520 = LINE('',#12521,#12522);+#12521 = CARTESIAN_POINT('',(-0.13701203044,2.463781415133E-02,1.7000001+ ));+#12522 = VECTOR('',#12523,1.);+#12523 = DIRECTION('',(0.,1.,0.));+#12524 = PCURVE('',#12410,#12525);+#12525 = DEFINITIONAL_REPRESENTATION('',(#12526),#12530);+#12526 = LINE('',#12527,#12528);+#12527 = CARTESIAN_POINT('',(0.127916093239,0.126197175973));+#12528 = VECTOR('',#12529,1.);+#12529 = DIRECTION('',(0.,1.));+#12530 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12531 = PCURVE('',#5025,#12532);+#12532 = DEFINITIONAL_REPRESENTATION('',(#12533),#12537);+#12533 = LINE('',#12534,#12535);+#12534 = CARTESIAN_POINT('',(0.,-0.1));+#12535 = VECTOR('',#12536,1.);+#12536 = DIRECTION('',(1.,0.));+#12537 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12538 = ORIENTED_EDGE('',*,*,#12539,.T.);+#12539 = EDGE_CURVE('',#12517,#12540,#12542,.T.);+#12540 = VERTEX_POINT('',#12541);+#12541 = CARTESIAN_POINT('',(-0.107933680018,0.112302594736,1.7000001));+#12542 = SURFACE_CURVE('',#12543,(#12547,#12554),.PCURVE_S1.);+#12543 = LINE('',#12544,#12545);+#12544 = CARTESIAN_POINT('',(-0.13701203044,0.112302594736,1.7000001));+#12545 = VECTOR('',#12546,1.);+#12546 = DIRECTION('',(1.,0.,0.));+#12547 = PCURVE('',#12410,#12548);+#12548 = DEFINITIONAL_REPRESENTATION('',(#12549),#12553);+#12549 = LINE('',#12550,#12551);+#12550 = CARTESIAN_POINT('',(0.127916093239,0.213861956558));+#12551 = VECTOR('',#12552,1.);+#12552 = DIRECTION('',(1.,0.));+#12553 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12554 = PCURVE('',#4998,#12555);+#12555 = DEFINITIONAL_REPRESENTATION('',(#12556),#12560);+#12556 = LINE('',#12557,#12558);+#12557 = CARTESIAN_POINT('',(0.,-0.1));+#12558 = VECTOR('',#12559,1.);+#12559 = DIRECTION('',(1.,0.));+#12560 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12561 = ORIENTED_EDGE('',*,*,#12562,.T.);+#12562 = EDGE_CURVE('',#12540,#12563,#12565,.T.);+#12563 = VERTEX_POINT('',#12564);+#12564 = CARTESIAN_POINT('',(-0.107933680018,-0.101559361821,1.7000001)+ );+#12565 = SURFACE_CURVE('',#12566,(#12570,#12577),.PCURVE_S1.);+#12566 = LINE('',#12567,#12568);+#12567 = CARTESIAN_POINT('',(-0.107933680018,0.112302594736,1.7000001));+#12568 = VECTOR('',#12569,1.);+#12569 = DIRECTION('',(0.,-1.,0.));+#12570 = PCURVE('',#12410,#12571);+#12571 = DEFINITIONAL_REPRESENTATION('',(#12572),#12576);+#12572 = LINE('',#12573,#12574);+#12573 = CARTESIAN_POINT('',(0.156994443662,0.213861956558));+#12574 = VECTOR('',#12575,1.);+#12575 = DIRECTION('',(0.,-1.));+#12576 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12577 = PCURVE('',#4971,#12578);+#12578 = DEFINITIONAL_REPRESENTATION('',(#12579),#12583);+#12579 = LINE('',#12580,#12581);+#12580 = CARTESIAN_POINT('',(0.,-0.1));+#12581 = VECTOR('',#12582,1.);+#12582 = DIRECTION('',(1.,0.));+#12583 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12584 = ORIENTED_EDGE('',*,*,#12585,.T.);+#12585 = EDGE_CURVE('',#12563,#12586,#12588,.T.);+#12586 = VERTEX_POINT('',#12587);+#12587 = CARTESIAN_POINT('',(-0.13701203044,-0.101559361821,1.7000001));+#12588 = SURFACE_CURVE('',#12589,(#12593,#12600),.PCURVE_S1.);+#12589 = LINE('',#12590,#12591);+#12590 = CARTESIAN_POINT('',(-0.107933680018,-0.101559361821,1.7000001)+ );+#12591 = VECTOR('',#12592,1.);+#12592 = DIRECTION('',(-1.,0.,0.));+#12593 = PCURVE('',#12410,#12594);+#12594 = DEFINITIONAL_REPRESENTATION('',(#12595),#12599);+#12595 = LINE('',#12596,#12597);+#12596 = CARTESIAN_POINT('',(0.156994443662,0.));+#12597 = VECTOR('',#12598,1.);+#12598 = DIRECTION('',(-1.,0.));+#12599 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12600 = PCURVE('',#4944,#12601);+#12601 = DEFINITIONAL_REPRESENTATION('',(#12602),#12606);+#12602 = LINE('',#12603,#12604);+#12603 = CARTESIAN_POINT('',(0.,-0.1));+#12604 = VECTOR('',#12605,1.);+#12605 = DIRECTION('',(1.,0.));+#12606 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12607 = ORIENTED_EDGE('',*,*,#12608,.T.);+#12608 = EDGE_CURVE('',#12586,#12609,#12611,.T.);+#12609 = VERTEX_POINT('',#12610);+#12610 = CARTESIAN_POINT('',(-0.13701203044,2.86486211062E-04,1.7000001)+ );+#12611 = SURFACE_CURVE('',#12612,(#12616,#12623),.PCURVE_S1.);+#12612 = LINE('',#12613,#12614);+#12613 = CARTESIAN_POINT('',(-0.13701203044,-0.101559361821,1.7000001));+#12614 = VECTOR('',#12615,1.);+#12615 = DIRECTION('',(0.,1.,0.));+#12616 = PCURVE('',#12410,#12617);+#12617 = DEFINITIONAL_REPRESENTATION('',(#12618),#12622);+#12618 = LINE('',#12619,#12620);+#12619 = CARTESIAN_POINT('',(0.127916093239,0.));+#12620 = VECTOR('',#12621,1.);+#12621 = DIRECTION('',(0.,1.));+#12622 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12623 = PCURVE('',#4917,#12624);+#12624 = DEFINITIONAL_REPRESENTATION('',(#12625),#12629);+#12625 = LINE('',#12626,#12627);+#12626 = CARTESIAN_POINT('',(0.,-0.1));+#12627 = VECTOR('',#12628,1.);+#12628 = DIRECTION('',(1.,0.));+#12629 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12630 = ORIENTED_EDGE('',*,*,#12631,.T.);+#12631 = EDGE_CURVE('',#12609,#12632,#12634,.T.);+#12632 = VERTEX_POINT('',#12633);+#12633 = CARTESIAN_POINT('',(-0.216225467799,2.86486211062E-04,1.7000001+ ));+#12634 = SURFACE_CURVE('',#12635,(#12639,#12646),.PCURVE_S1.);+#12635 = LINE('',#12636,#12637);+#12636 = CARTESIAN_POINT('',(-0.13701203044,2.86486211062E-04,1.7000001)+ );+#12637 = VECTOR('',#12638,1.);+#12638 = DIRECTION('',(-1.,0.,0.));+#12639 = PCURVE('',#12410,#12640);+#12640 = DEFINITIONAL_REPRESENTATION('',(#12641),#12645);+#12641 = LINE('',#12642,#12643);+#12642 = CARTESIAN_POINT('',(0.127916093239,0.101845848033));+#12643 = VECTOR('',#12644,1.);+#12644 = DIRECTION('',(-1.,0.));+#12645 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12646 = PCURVE('',#4890,#12647);+#12647 = DEFINITIONAL_REPRESENTATION('',(#12648),#12652);+#12648 = LINE('',#12649,#12650);+#12649 = CARTESIAN_POINT('',(0.,-0.1));+#12650 = VECTOR('',#12651,1.);+#12651 = DIRECTION('',(1.,0.));+#12652 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12653 = ORIENTED_EDGE('',*,*,#12654,.T.);+#12654 = EDGE_CURVE('',#12632,#12655,#12657,.T.);+#12655 = VERTEX_POINT('',#12656);+#12656 = CARTESIAN_POINT('',(-0.216225467799,-0.101559361821,1.7000001)+ );+#12657 = SURFACE_CURVE('',#12658,(#12662,#12669),.PCURVE_S1.);+#12658 = LINE('',#12659,#12660);+#12659 = CARTESIAN_POINT('',(-0.216225467799,2.86486211062E-04,1.7000001+ ));+#12660 = VECTOR('',#12661,1.);+#12661 = DIRECTION('',(0.,-1.,0.));+#12662 = PCURVE('',#12410,#12663);+#12663 = DEFINITIONAL_REPRESENTATION('',(#12664),#12668);+#12664 = LINE('',#12665,#12666);+#12665 = CARTESIAN_POINT('',(4.870265588054E-02,0.101845848033));+#12666 = VECTOR('',#12667,1.);+#12667 = DIRECTION('',(0.,-1.));+#12668 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12669 = PCURVE('',#4863,#12670);+#12670 = DEFINITIONAL_REPRESENTATION('',(#12671),#12675);+#12671 = LINE('',#12672,#12673);+#12672 = CARTESIAN_POINT('',(0.,-0.1));+#12673 = VECTOR('',#12674,1.);+#12674 = DIRECTION('',(1.,0.));+#12675 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12676 = ORIENTED_EDGE('',*,*,#12677,.T.);+#12677 = EDGE_CURVE('',#12655,#12447,#12678,.T.);+#12678 = SURFACE_CURVE('',#12679,(#12683,#12690),.PCURVE_S1.);+#12679 = LINE('',#12680,#12681);+#12680 = CARTESIAN_POINT('',(-0.216225467799,-0.101559361821,1.7000001)+ );+#12681 = VECTOR('',#12682,1.);+#12682 = DIRECTION('',(-1.,0.,0.));+#12683 = PCURVE('',#12410,#12684);+#12684 = DEFINITIONAL_REPRESENTATION('',(#12685),#12689);+#12685 = LINE('',#12686,#12687);+#12686 = CARTESIAN_POINT('',(4.870265588054E-02,0.));+#12687 = VECTOR('',#12688,1.);+#12688 = DIRECTION('',(-1.,0.));+#12689 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12690 = PCURVE('',#4836,#12691);+#12691 = DEFINITIONAL_REPRESENTATION('',(#12692),#12696);+#12692 = LINE('',#12693,#12694);+#12693 = CARTESIAN_POINT('',(0.,-0.1));+#12694 = VECTOR('',#12695,1.);+#12695 = DIRECTION('',(1.,0.));+#12696 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12697 = ADVANCED_FACE('',(#12698),#5052,.T.);+#12698 = FACE_BOUND('',#12699,.T.);+#12699 = EDGE_LOOP('',(#12700,#12701,#12702,#12703));+#12700 = ORIENTED_EDGE('',*,*,#5036,.T.);+#12701 = ORIENTED_EDGE('',*,*,#12422,.T.);+#12702 = ORIENTED_EDGE('',*,*,#12493,.T.);+#12703 = ORIENTED_EDGE('',*,*,#12704,.F.);+#12704 = EDGE_CURVE('',#5010,#12494,#12705,.T.);+#12705 = SURFACE_CURVE('',#12706,(#12710,#12717),.PCURVE_S1.);+#12706 = LINE('',#12707,#12708);+#12707 = CARTESIAN_POINT('',(-0.13701203044,2.463781415133E-02,1.8000001+ ));+#12708 = VECTOR('',#12709,1.);+#12709 = DIRECTION('',(-0.,-0.,-1.));+#12710 = PCURVE('',#5052,#12711);+#12711 = DEFINITIONAL_REPRESENTATION('',(#12712),#12716);+#12712 = LINE('',#12713,#12714);+#12713 = CARTESIAN_POINT('',(7.921343735865E-02,0.));+#12714 = VECTOR('',#12715,1.);+#12715 = DIRECTION('',(0.,-1.));+#12716 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12717 = PCURVE('',#5025,#12718);+#12718 = DEFINITIONAL_REPRESENTATION('',(#12719),#12723);+#12719 = LINE('',#12720,#12721);+#12720 = CARTESIAN_POINT('',(0.,0.));+#12721 = VECTOR('',#12722,1.);+#12722 = DIRECTION('',(0.,-1.));+#12723 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12724 = ADVANCED_FACE('',(#12725),#5025,.T.);+#12725 = FACE_BOUND('',#12726,.T.);+#12726 = EDGE_LOOP('',(#12727,#12728,#12729,#12730));+#12727 = ORIENTED_EDGE('',*,*,#5009,.T.);+#12728 = ORIENTED_EDGE('',*,*,#12704,.T.);+#12729 = ORIENTED_EDGE('',*,*,#12516,.T.);+#12730 = ORIENTED_EDGE('',*,*,#12731,.F.);+#12731 = EDGE_CURVE('',#4983,#12517,#12732,.T.);+#12732 = SURFACE_CURVE('',#12733,(#12737,#12744),.PCURVE_S1.);+#12733 = LINE('',#12734,#12735);+#12734 = CARTESIAN_POINT('',(-0.13701203044,0.112302594736,1.8000001));+#12735 = VECTOR('',#12736,1.);+#12736 = DIRECTION('',(-0.,-0.,-1.));+#12737 = PCURVE('',#5025,#12738);+#12738 = DEFINITIONAL_REPRESENTATION('',(#12739),#12743);+#12739 = LINE('',#12740,#12741);+#12740 = CARTESIAN_POINT('',(8.766478058498E-02,0.));+#12741 = VECTOR('',#12742,1.);+#12742 = DIRECTION('',(0.,-1.));+#12743 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12744 = PCURVE('',#4998,#12745);+#12745 = DEFINITIONAL_REPRESENTATION('',(#12746),#12750);+#12746 = LINE('',#12747,#12748);+#12747 = CARTESIAN_POINT('',(0.,0.));+#12748 = VECTOR('',#12749,1.);+#12749 = DIRECTION('',(0.,-1.));+#12750 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12751 = ADVANCED_FACE('',(#12752),#4998,.T.);+#12752 = FACE_BOUND('',#12753,.T.);+#12753 = EDGE_LOOP('',(#12754,#12755,#12756,#12757));+#12754 = ORIENTED_EDGE('',*,*,#4982,.T.);+#12755 = ORIENTED_EDGE('',*,*,#12731,.T.);+#12756 = ORIENTED_EDGE('',*,*,#12539,.T.);+#12757 = ORIENTED_EDGE('',*,*,#12758,.F.);+#12758 = EDGE_CURVE('',#4956,#12540,#12759,.T.);+#12759 = SURFACE_CURVE('',#12760,(#12764,#12771),.PCURVE_S1.);+#12760 = LINE('',#12761,#12762);+#12761 = CARTESIAN_POINT('',(-0.107933680018,0.112302594736,1.8000001));+#12762 = VECTOR('',#12763,1.);+#12763 = DIRECTION('',(-0.,-0.,-1.));+#12764 = PCURVE('',#4998,#12765);+#12765 = DEFINITIONAL_REPRESENTATION('',(#12766),#12770);+#12766 = LINE('',#12767,#12768);+#12767 = CARTESIAN_POINT('',(2.907835042279E-02,0.));+#12768 = VECTOR('',#12769,1.);+#12769 = DIRECTION('',(0.,-1.));+#12770 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12771 = PCURVE('',#4971,#12772);+#12772 = DEFINITIONAL_REPRESENTATION('',(#12773),#12777);+#12773 = LINE('',#12774,#12775);+#12774 = CARTESIAN_POINT('',(0.,0.));+#12775 = VECTOR('',#12776,1.);+#12776 = DIRECTION('',(0.,-1.));+#12777 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12778 = ADVANCED_FACE('',(#12779),#4971,.T.);+#12779 = FACE_BOUND('',#12780,.T.);+#12780 = EDGE_LOOP('',(#12781,#12782,#12783,#12784));+#12781 = ORIENTED_EDGE('',*,*,#4955,.T.);+#12782 = ORIENTED_EDGE('',*,*,#12758,.T.);+#12783 = ORIENTED_EDGE('',*,*,#12562,.T.);+#12784 = ORIENTED_EDGE('',*,*,#12785,.F.);+#12785 = EDGE_CURVE('',#4929,#12563,#12786,.T.);+#12786 = SURFACE_CURVE('',#12787,(#12791,#12798),.PCURVE_S1.);+#12787 = LINE('',#12788,#12789);+#12788 = CARTESIAN_POINT('',(-0.107933680018,-0.101559361821,1.8000001)+ );+#12789 = VECTOR('',#12790,1.);+#12790 = DIRECTION('',(-0.,-0.,-1.));+#12791 = PCURVE('',#4971,#12792);+#12792 = DEFINITIONAL_REPRESENTATION('',(#12793),#12797);+#12793 = LINE('',#12794,#12795);+#12794 = CARTESIAN_POINT('',(0.213861956558,0.));+#12795 = VECTOR('',#12796,1.);+#12796 = DIRECTION('',(0.,-1.));+#12797 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12798 = PCURVE('',#4944,#12799);+#12799 = DEFINITIONAL_REPRESENTATION('',(#12800),#12804);+#12800 = LINE('',#12801,#12802);+#12801 = CARTESIAN_POINT('',(0.,0.));+#12802 = VECTOR('',#12803,1.);+#12803 = DIRECTION('',(0.,-1.));+#12804 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12805 = ADVANCED_FACE('',(#12806),#4944,.T.);+#12806 = FACE_BOUND('',#12807,.T.);+#12807 = EDGE_LOOP('',(#12808,#12809,#12810,#12811));+#12808 = ORIENTED_EDGE('',*,*,#4928,.T.);+#12809 = ORIENTED_EDGE('',*,*,#12785,.T.);+#12810 = ORIENTED_EDGE('',*,*,#12585,.T.);+#12811 = ORIENTED_EDGE('',*,*,#12812,.F.);+#12812 = EDGE_CURVE('',#4902,#12586,#12813,.T.);+#12813 = SURFACE_CURVE('',#12814,(#12818,#12825),.PCURVE_S1.);+#12814 = LINE('',#12815,#12816);+#12815 = CARTESIAN_POINT('',(-0.13701203044,-0.101559361821,1.8000001));+#12816 = VECTOR('',#12817,1.);+#12817 = DIRECTION('',(-0.,-0.,-1.));+#12818 = PCURVE('',#4944,#12819);+#12819 = DEFINITIONAL_REPRESENTATION('',(#12820),#12824);+#12820 = LINE('',#12821,#12822);+#12821 = CARTESIAN_POINT('',(2.907835042279E-02,0.));+#12822 = VECTOR('',#12823,1.);+#12823 = DIRECTION('',(0.,-1.));+#12824 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12825 = PCURVE('',#4917,#12826);+#12826 = DEFINITIONAL_REPRESENTATION('',(#12827),#12831);+#12827 = LINE('',#12828,#12829);+#12828 = CARTESIAN_POINT('',(0.,0.));+#12829 = VECTOR('',#12830,1.);+#12830 = DIRECTION('',(0.,-1.));+#12831 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12832 = ADVANCED_FACE('',(#12833),#4917,.T.);+#12833 = FACE_BOUND('',#12834,.T.);+#12834 = EDGE_LOOP('',(#12835,#12836,#12837,#12838));+#12835 = ORIENTED_EDGE('',*,*,#4901,.T.);+#12836 = ORIENTED_EDGE('',*,*,#12812,.T.);+#12837 = ORIENTED_EDGE('',*,*,#12608,.T.);+#12838 = ORIENTED_EDGE('',*,*,#12839,.F.);+#12839 = EDGE_CURVE('',#4875,#12609,#12840,.T.);+#12840 = SURFACE_CURVE('',#12841,(#12845,#12852),.PCURVE_S1.);+#12841 = LINE('',#12842,#12843);+#12842 = CARTESIAN_POINT('',(-0.13701203044,2.86486211062E-04,1.8000001)+ );+#12843 = VECTOR('',#12844,1.);+#12844 = DIRECTION('',(-0.,-0.,-1.));+#12845 = PCURVE('',#4917,#12846);+#12846 = DEFINITIONAL_REPRESENTATION('',(#12847),#12851);+#12847 = LINE('',#12848,#12849);+#12848 = CARTESIAN_POINT('',(0.101845848033,0.));+#12849 = VECTOR('',#12850,1.);+#12850 = DIRECTION('',(0.,-1.));+#12851 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12852 = PCURVE('',#4890,#12853);+#12853 = DEFINITIONAL_REPRESENTATION('',(#12854),#12858);+#12854 = LINE('',#12855,#12856);+#12855 = CARTESIAN_POINT('',(0.,0.));+#12856 = VECTOR('',#12857,1.);+#12857 = DIRECTION('',(0.,-1.));+#12858 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12859 = ADVANCED_FACE('',(#12860),#4890,.T.);+#12860 = FACE_BOUND('',#12861,.T.);+#12861 = EDGE_LOOP('',(#12862,#12863,#12864,#12865));+#12862 = ORIENTED_EDGE('',*,*,#4874,.T.);+#12863 = ORIENTED_EDGE('',*,*,#12839,.T.);+#12864 = ORIENTED_EDGE('',*,*,#12631,.T.);+#12865 = ORIENTED_EDGE('',*,*,#12866,.F.);+#12866 = EDGE_CURVE('',#4848,#12632,#12867,.T.);+#12867 = SURFACE_CURVE('',#12868,(#12872,#12879),.PCURVE_S1.);+#12868 = LINE('',#12869,#12870);+#12869 = CARTESIAN_POINT('',(-0.216225467799,2.86486211062E-04,1.8000001+ ));+#12870 = VECTOR('',#12871,1.);+#12871 = DIRECTION('',(-0.,-0.,-1.));+#12872 = PCURVE('',#4890,#12873);+#12873 = DEFINITIONAL_REPRESENTATION('',(#12874),#12878);+#12874 = LINE('',#12875,#12876);+#12875 = CARTESIAN_POINT('',(7.921343735865E-02,0.));+#12876 = VECTOR('',#12877,1.);+#12877 = DIRECTION('',(0.,-1.));+#12878 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12879 = PCURVE('',#4863,#12880);+#12880 = DEFINITIONAL_REPRESENTATION('',(#12881),#12885);+#12881 = LINE('',#12882,#12883);+#12882 = CARTESIAN_POINT('',(0.,0.));+#12883 = VECTOR('',#12884,1.);+#12884 = DIRECTION('',(0.,-1.));+#12885 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12886 = ADVANCED_FACE('',(#12887),#4863,.T.);+#12887 = FACE_BOUND('',#12888,.T.);+#12888 = EDGE_LOOP('',(#12889,#12890,#12891,#12892));+#12889 = ORIENTED_EDGE('',*,*,#4847,.T.);+#12890 = ORIENTED_EDGE('',*,*,#12866,.T.);+#12891 = ORIENTED_EDGE('',*,*,#12654,.T.);+#12892 = ORIENTED_EDGE('',*,*,#12893,.F.);+#12893 = EDGE_CURVE('',#4821,#12655,#12894,.T.);+#12894 = SURFACE_CURVE('',#12895,(#12899,#12906),.PCURVE_S1.);+#12895 = LINE('',#12896,#12897);+#12896 = CARTESIAN_POINT('',(-0.216225467799,-0.101559361821,1.8000001)+ );+#12897 = VECTOR('',#12898,1.);+#12898 = DIRECTION('',(-0.,-0.,-1.));+#12899 = PCURVE('',#4863,#12900);+#12900 = DEFINITIONAL_REPRESENTATION('',(#12901),#12905);+#12901 = LINE('',#12902,#12903);+#12902 = CARTESIAN_POINT('',(0.101845848033,0.));+#12903 = VECTOR('',#12904,1.);+#12904 = DIRECTION('',(0.,-1.));+#12905 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12906 = PCURVE('',#4836,#12907);+#12907 = DEFINITIONAL_REPRESENTATION('',(#12908),#12912);+#12908 = LINE('',#12909,#12910);+#12909 = CARTESIAN_POINT('',(0.,0.));+#12910 = VECTOR('',#12911,1.);+#12911 = DIRECTION('',(0.,-1.));+#12912 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12913 = ADVANCED_FACE('',(#12914),#4836,.T.);+#12914 = FACE_BOUND('',#12915,.T.);+#12915 = EDGE_LOOP('',(#12916,#12917,#12918,#12919));+#12916 = ORIENTED_EDGE('',*,*,#4820,.T.);+#12917 = ORIENTED_EDGE('',*,*,#12893,.T.);+#12918 = ORIENTED_EDGE('',*,*,#12677,.T.);+#12919 = ORIENTED_EDGE('',*,*,#12920,.F.);+#12920 = EDGE_CURVE('',#4794,#12447,#12921,.T.);+#12921 = SURFACE_CURVE('',#12922,(#12926,#12933),.PCURVE_S1.);+#12922 = LINE('',#12923,#12924);+#12923 = CARTESIAN_POINT('',(-0.245303818222,-0.101559361821,1.8000001)+ );+#12924 = VECTOR('',#12925,1.);+#12925 = DIRECTION('',(-0.,-0.,-1.));+#12926 = PCURVE('',#4836,#12927);+#12927 = DEFINITIONAL_REPRESENTATION('',(#12928),#12932);+#12928 = LINE('',#12929,#12930);+#12929 = CARTESIAN_POINT('',(2.907835042279E-02,0.));+#12930 = VECTOR('',#12931,1.);+#12931 = DIRECTION('',(0.,-1.));+#12932 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12933 = PCURVE('',#4809,#12934);+#12934 = DEFINITIONAL_REPRESENTATION('',(#12935),#12939);+#12935 = LINE('',#12936,#12937);+#12936 = CARTESIAN_POINT('',(0.,0.));+#12937 = VECTOR('',#12938,1.);+#12938 = DIRECTION('',(0.,-1.));+#12939 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12940 = ADVANCED_FACE('',(#12941),#4809,.T.);+#12941 = FACE_BOUND('',#12942,.T.);+#12942 = EDGE_LOOP('',(#12943,#12944,#12945,#12946));+#12943 = ORIENTED_EDGE('',*,*,#4793,.T.);+#12944 = ORIENTED_EDGE('',*,*,#12920,.T.);+#12945 = ORIENTED_EDGE('',*,*,#12446,.T.);+#12946 = ORIENTED_EDGE('',*,*,#12947,.F.);+#12947 = EDGE_CURVE('',#4767,#12449,#12948,.T.);+#12948 = SURFACE_CURVE('',#12949,(#12953,#12960),.PCURVE_S1.);+#12949 = LINE('',#12950,#12951);+#12950 = CARTESIAN_POINT('',(-0.245303818222,0.112302594736,1.8000001));+#12951 = VECTOR('',#12952,1.);+#12952 = DIRECTION('',(-0.,-0.,-1.));+#12953 = PCURVE('',#4809,#12954);+#12954 = DEFINITIONAL_REPRESENTATION('',(#12955),#12959);+#12955 = LINE('',#12956,#12957);+#12956 = CARTESIAN_POINT('',(0.213861956558,0.));+#12957 = VECTOR('',#12958,1.);+#12958 = DIRECTION('',(0.,-1.));+#12959 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12960 = PCURVE('',#4782,#12961);+#12961 = DEFINITIONAL_REPRESENTATION('',(#12962),#12966);+#12962 = LINE('',#12963,#12964);+#12963 = CARTESIAN_POINT('',(0.,0.));+#12964 = VECTOR('',#12965,1.);+#12965 = DIRECTION('',(0.,-1.));+#12966 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12967 = ADVANCED_FACE('',(#12968),#4782,.T.);+#12968 = FACE_BOUND('',#12969,.T.);+#12969 = EDGE_LOOP('',(#12970,#12971,#12972,#12973));+#12970 = ORIENTED_EDGE('',*,*,#4764,.T.);+#12971 = ORIENTED_EDGE('',*,*,#12947,.T.);+#12972 = ORIENTED_EDGE('',*,*,#12471,.T.);+#12973 = ORIENTED_EDGE('',*,*,#12371,.F.);+#12974 = ADVANCED_FACE('',(#12975),#4751,.T.);+#12975 = FACE_BOUND('',#12976,.T.);+#12976 = EDGE_LOOP('',(#12977,#12978,#13001,#13029));+#12977 = ORIENTED_EDGE('',*,*,#4737,.T.);+#12978 = ORIENTED_EDGE('',*,*,#12979,.T.);+#12979 = EDGE_CURVE('',#4574,#12980,#12982,.T.);+#12980 = VERTEX_POINT('',#12981);+#12981 = CARTESIAN_POINT('',(5.020670848862E-02,0.112302594736,1.7000001+ ));+#12982 = SURFACE_CURVE('',#12983,(#12987,#12994),.PCURVE_S1.);+#12983 = LINE('',#12984,#12985);+#12984 = CARTESIAN_POINT('',(5.020670848862E-02,0.112302594736,1.8000001+ ));+#12985 = VECTOR('',#12986,1.);+#12986 = DIRECTION('',(-0.,-0.,-1.));+#12987 = PCURVE('',#4751,#12988);+#12988 = DEFINITIONAL_REPRESENTATION('',(#12989),#12993);+#12989 = LINE('',#12990,#12991);+#12990 = CARTESIAN_POINT('',(0.,0.));+#12991 = VECTOR('',#12992,1.);+#12992 = DIRECTION('',(0.,-1.));+#12993 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12994 = PCURVE('',#4591,#12995);+#12995 = DEFINITIONAL_REPRESENTATION('',(#12996),#13000);+#12996 = LINE('',#12997,#12998);+#12997 = CARTESIAN_POINT('',(0.19606679686,0.));+#12998 = VECTOR('',#12999,1.);+#12999 = DIRECTION('',(0.,-1.));+#13000 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13001 = ORIENTED_EDGE('',*,*,#13002,.T.);+#13002 = EDGE_CURVE('',#12980,#13003,#13005,.T.);+#13003 = VERTEX_POINT('',#13004);+#13004 = CARTESIAN_POINT('',(8.01445175446E-02,0.112302594736,1.7000001)+ );+#13005 = SURFACE_CURVE('',#13006,(#13010,#13017),.PCURVE_S1.);+#13006 = LINE('',#13007,#13008);+#13007 = CARTESIAN_POINT('',(5.020670848862E-02,0.112302594736,1.7000001+ ));+#13008 = VECTOR('',#13009,1.);+#13009 = DIRECTION('',(1.,0.,0.));+#13010 = PCURVE('',#4751,#13011);+#13011 = DEFINITIONAL_REPRESENTATION('',(#13012),#13016);+#13012 = LINE('',#13013,#13014);+#13013 = CARTESIAN_POINT('',(0.,-0.1));+#13014 = VECTOR('',#13015,1.);+#13015 = DIRECTION('',(1.,0.));+#13016 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13017 = PCURVE('',#13018,#13023);+#13018 = PLANE('',#13019);+#13019 = AXIS2_PLACEMENT_3D('',#13020,#13021,#13022);+#13020 = CARTESIAN_POINT('',(-8.830937455987E-02,-0.101559361821,+ 1.7000001));+#13021 = DIRECTION('',(0.,0.,1.));+#13022 = DIRECTION('',(1.,0.,0.));+#13023 = DEFINITIONAL_REPRESENTATION('',(#13024),#13028);+#13024 = LINE('',#13025,#13026);+#13025 = CARTESIAN_POINT('',(0.138516083048,0.213861956558));+#13026 = VECTOR('',#13027,1.);+#13027 = DIRECTION('',(1.,0.));+#13028 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13029 = ORIENTED_EDGE('',*,*,#13030,.F.);+#13030 = EDGE_CURVE('',#4711,#13003,#13031,.T.);+#13031 = SURFACE_CURVE('',#13032,(#13036,#13043),.PCURVE_S1.);+#13032 = LINE('',#13033,#13034);+#13033 = CARTESIAN_POINT('',(8.01445175446E-02,0.112302594736,1.8000001)+ );+#13034 = VECTOR('',#13035,1.);+#13035 = DIRECTION('',(-0.,-0.,-1.));+#13036 = PCURVE('',#4751,#13037);+#13037 = DEFINITIONAL_REPRESENTATION('',(#13038),#13042);+#13038 = LINE('',#13039,#13040);+#13039 = CARTESIAN_POINT('',(2.993780905598E-02,0.));+#13040 = VECTOR('',#13041,1.);+#13041 = DIRECTION('',(0.,-1.));+#13042 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13043 = PCURVE('',#4726,#13044);+#13044 = DEFINITIONAL_REPRESENTATION('',(#13045),#13049);+#13045 = LINE('',#13046,#13047);+#13046 = CARTESIAN_POINT('',(0.,0.));+#13047 = VECTOR('',#13048,1.);+#13048 = DIRECTION('',(0.,-1.));+#13049 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13050 = ADVANCED_FACE('',(#13051),#13018,.T.);+#13051 = FACE_BOUND('',#13052,.F.);+#13052 = EDGE_LOOP('',(#13053,#13078,#13099,#13100,#13123,#13146,#13169)+ );+#13053 = ORIENTED_EDGE('',*,*,#13054,.T.);+#13054 = EDGE_CURVE('',#13055,#13057,#13059,.T.);+#13055 = VERTEX_POINT('',#13056);+#13056 = CARTESIAN_POINT('',(-5.020670848862E-02,0.112302594736,+ 1.7000001));+#13057 = VERTEX_POINT('',#13058);+#13058 = CARTESIAN_POINT('',(-7.162155276552E-05,-7.720803388121E-02,+ 1.7000001));+#13059 = SURFACE_CURVE('',#13060,(#13064,#13071),.PCURVE_S1.);+#13060 = LINE('',#13061,#13062);+#13061 = CARTESIAN_POINT('',(-5.020670848862E-02,0.112302594736,+ 1.7000001));+#13062 = VECTOR('',#13063,1.);+#13063 = DIRECTION('',(0.255751966392,-0.966742432961,0.));+#13064 = PCURVE('',#13018,#13065);+#13065 = DEFINITIONAL_REPRESENTATION('',(#13066),#13070);+#13066 = LINE('',#13067,#13068);+#13067 = CARTESIAN_POINT('',(3.810266607125E-02,0.213861956558));+#13068 = VECTOR('',#13069,1.);+#13069 = DIRECTION('',(0.255751966392,-0.966742432961));+#13070 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13071 = PCURVE('',#4618,#13072);+#13072 = DEFINITIONAL_REPRESENTATION('',(#13073),#13077);+#13073 = LINE('',#13074,#13075);+#13074 = CARTESIAN_POINT('',(0.,-0.1));+#13075 = VECTOR('',#13076,1.);+#13076 = DIRECTION('',(1.,0.));+#13077 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13078 = ORIENTED_EDGE('',*,*,#13079,.T.);+#13079 = EDGE_CURVE('',#13057,#12980,#13080,.T.);+#13080 = SURFACE_CURVE('',#13081,(#13085,#13092),.PCURVE_S1.);+#13081 = LINE('',#13082,#13083);+#13082 = CARTESIAN_POINT('',(-7.162155276551E-05,-7.720803388121E-02,+ 1.7000001));+#13083 = VECTOR('',#13084,1.);+#13084 = DIRECTION('',(0.256434699025,0.966561557862,0.));+#13085 = PCURVE('',#13018,#13086);+#13086 = DEFINITIONAL_REPRESENTATION('',(#13087),#13091);+#13087 = LINE('',#13088,#13089);+#13088 = CARTESIAN_POINT('',(8.82377530071E-02,2.435132794027E-02));+#13089 = VECTOR('',#13090,1.);+#13090 = DIRECTION('',(0.256434699025,0.966561557862));+#13091 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13092 = PCURVE('',#4591,#13093);+#13093 = DEFINITIONAL_REPRESENTATION('',(#13094),#13098);+#13094 = LINE('',#13095,#13096);+#13095 = CARTESIAN_POINT('',(0.,-0.1));+#13096 = VECTOR('',#13097,1.);+#13097 = DIRECTION('',(1.,0.));+#13098 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13099 = ORIENTED_EDGE('',*,*,#13002,.T.);+#13100 = ORIENTED_EDGE('',*,*,#13101,.T.);+#13101 = EDGE_CURVE('',#13003,#13102,#13104,.T.);+#13102 = VERTEX_POINT('',#13103);+#13103 = CARTESIAN_POINT('',(1.754728042755E-02,-0.101559361821,+ 1.7000001));+#13104 = SURFACE_CURVE('',#13105,(#13109,#13116),.PCURVE_S1.);+#13105 = LINE('',#13106,#13107);+#13106 = CARTESIAN_POINT('',(8.01445175446E-02,0.112302594736,1.7000001)+ );+#13107 = VECTOR('',#13108,1.);+#13108 = DIRECTION('',(-0.280913194718,-0.959733180125,0.));+#13109 = PCURVE('',#13018,#13110);+#13110 = DEFINITIONAL_REPRESENTATION('',(#13111),#13115);+#13111 = LINE('',#13112,#13113);+#13112 = CARTESIAN_POINT('',(0.168453892104,0.213861956558));+#13113 = VECTOR('',#13114,1.);+#13114 = DIRECTION('',(-0.280913194718,-0.959733180125));+#13115 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13116 = PCURVE('',#4726,#13117);+#13117 = DEFINITIONAL_REPRESENTATION('',(#13118),#13122);+#13118 = LINE('',#13119,#13120);+#13119 = CARTESIAN_POINT('',(-0.,-0.1));+#13120 = VECTOR('',#13121,1.);+#13121 = DIRECTION('',(1.,0.));+#13122 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13123 = ORIENTED_EDGE('',*,*,#13124,.T.);+#13124 = EDGE_CURVE('',#13102,#13125,#13127,.T.);+#13125 = VERTEX_POINT('',#13126);+#13126 = CARTESIAN_POINT('',(-1.754728042755E-02,-0.101559361821,+ 1.7000001));+#13127 = SURFACE_CURVE('',#13128,(#13132,#13139),.PCURVE_S1.);+#13128 = LINE('',#13129,#13130);+#13129 = CARTESIAN_POINT('',(1.754728042755E-02,-0.101559361821,+ 1.7000001));+#13130 = VECTOR('',#13131,1.);+#13131 = DIRECTION('',(-1.,0.,0.));+#13132 = PCURVE('',#13018,#13133);+#13133 = DEFINITIONAL_REPRESENTATION('',(#13134),#13138);+#13134 = LINE('',#13135,#13136);+#13135 = CARTESIAN_POINT('',(0.105856654987,0.));+#13136 = VECTOR('',#13137,1.);+#13137 = DIRECTION('',(-1.,0.));+#13138 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13139 = PCURVE('',#4699,#13140);+#13140 = DEFINITIONAL_REPRESENTATION('',(#13141),#13145);+#13141 = LINE('',#13142,#13143);+#13142 = CARTESIAN_POINT('',(0.,-0.1));+#13143 = VECTOR('',#13144,1.);+#13144 = DIRECTION('',(1.,0.));+#13145 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13146 = ORIENTED_EDGE('',*,*,#13147,.T.);+#13147 = EDGE_CURVE('',#13125,#13148,#13150,.T.);+#13148 = VERTEX_POINT('',#13149);+#13149 = CARTESIAN_POINT('',(-8.01445175446E-02,0.112302594736,1.7000001+ ));+#13150 = SURFACE_CURVE('',#13151,(#13155,#13162),.PCURVE_S1.);+#13151 = LINE('',#13152,#13153);+#13152 = CARTESIAN_POINT('',(-1.754728042755E-02,-0.101559361821,+ 1.7000001));+#13153 = VECTOR('',#13154,1.);+#13154 = DIRECTION('',(-0.280913194718,0.959733180125,0.));+#13155 = PCURVE('',#13018,#13156);+#13156 = DEFINITIONAL_REPRESENTATION('',(#13157),#13161);+#13157 = LINE('',#13158,#13159);+#13158 = CARTESIAN_POINT('',(7.076209413232E-02,0.));+#13159 = VECTOR('',#13160,1.);+#13160 = DIRECTION('',(-0.280913194718,0.959733180125));+#13161 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13162 = PCURVE('',#4672,#13163);+#13163 = DEFINITIONAL_REPRESENTATION('',(#13164),#13168);+#13164 = LINE('',#13165,#13166);+#13165 = CARTESIAN_POINT('',(0.,-0.1));+#13166 = VECTOR('',#13167,1.);+#13167 = DIRECTION('',(1.,0.));+#13168 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13169 = ORIENTED_EDGE('',*,*,#13170,.T.);+#13170 = EDGE_CURVE('',#13148,#13055,#13171,.T.);+#13171 = SURFACE_CURVE('',#13172,(#13176,#13183),.PCURVE_S1.);+#13172 = LINE('',#13173,#13174);+#13173 = CARTESIAN_POINT('',(-8.01445175446E-02,0.112302594736,1.7000001+ ));+#13174 = VECTOR('',#13175,1.);+#13175 = DIRECTION('',(1.,0.,0.));+#13176 = PCURVE('',#13018,#13177);+#13177 = DEFINITIONAL_REPRESENTATION('',(#13178),#13182);+#13178 = LINE('',#13179,#13180);+#13179 = CARTESIAN_POINT('',(8.164857015267E-03,0.213861956558));+#13180 = VECTOR('',#13181,1.);+#13181 = DIRECTION('',(1.,0.));+#13182 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13183 = PCURVE('',#4645,#13184);+#13184 = DEFINITIONAL_REPRESENTATION('',(#13185),#13189);+#13185 = LINE('',#13186,#13187);+#13186 = CARTESIAN_POINT('',(0.,-0.1));+#13187 = VECTOR('',#13188,1.);+#13188 = DIRECTION('',(1.,0.));+#13189 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13190 = ADVANCED_FACE('',(#13191),#4726,.T.);+#13191 = FACE_BOUND('',#13192,.T.);+#13192 = EDGE_LOOP('',(#13193,#13194,#13195,#13196));+#13193 = ORIENTED_EDGE('',*,*,#4710,.T.);+#13194 = ORIENTED_EDGE('',*,*,#13030,.T.);+#13195 = ORIENTED_EDGE('',*,*,#13101,.T.);+#13196 = ORIENTED_EDGE('',*,*,#13197,.F.);+#13197 = EDGE_CURVE('',#4684,#13102,#13198,.T.);+#13198 = SURFACE_CURVE('',#13199,(#13203,#13210),.PCURVE_S1.);+#13199 = LINE('',#13200,#13201);+#13200 = CARTESIAN_POINT('',(1.754728042755E-02,-0.101559361821,+ 1.8000001));+#13201 = VECTOR('',#13202,1.);+#13202 = DIRECTION('',(-0.,-0.,-1.));+#13203 = PCURVE('',#4726,#13204);+#13204 = DEFINITIONAL_REPRESENTATION('',(#13205),#13209);+#13205 = LINE('',#13206,#13207);+#13206 = CARTESIAN_POINT('',(0.222834805534,0.));+#13207 = VECTOR('',#13208,1.);+#13208 = DIRECTION('',(0.,-1.));+#13209 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13210 = PCURVE('',#4699,#13211);+#13211 = DEFINITIONAL_REPRESENTATION('',(#13212),#13216);+#13212 = LINE('',#13213,#13214);+#13213 = CARTESIAN_POINT('',(0.,0.));+#13214 = VECTOR('',#13215,1.);+#13215 = DIRECTION('',(0.,-1.));+#13216 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13217 = ADVANCED_FACE('',(#13218),#4699,.T.);+#13218 = FACE_BOUND('',#13219,.T.);+#13219 = EDGE_LOOP('',(#13220,#13221,#13222,#13223));+#13220 = ORIENTED_EDGE('',*,*,#4683,.T.);+#13221 = ORIENTED_EDGE('',*,*,#13197,.T.);+#13222 = ORIENTED_EDGE('',*,*,#13124,.T.);+#13223 = ORIENTED_EDGE('',*,*,#13224,.F.);+#13224 = EDGE_CURVE('',#4657,#13125,#13225,.T.);+#13225 = SURFACE_CURVE('',#13226,(#13230,#13237),.PCURVE_S1.);+#13226 = LINE('',#13227,#13228);+#13227 = CARTESIAN_POINT('',(-1.754728042755E-02,-0.101559361821,+ 1.8000001));+#13228 = VECTOR('',#13229,1.);+#13229 = DIRECTION('',(-0.,-0.,-1.));+#13230 = PCURVE('',#4699,#13231);+#13231 = DEFINITIONAL_REPRESENTATION('',(#13232),#13236);+#13232 = LINE('',#13233,#13234);+#13233 = CARTESIAN_POINT('',(3.50945608551E-02,0.));+#13234 = VECTOR('',#13235,1.);+#13235 = DIRECTION('',(0.,-1.));+#13236 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13237 = PCURVE('',#4672,#13238);+#13238 = DEFINITIONAL_REPRESENTATION('',(#13239),#13243);+#13239 = LINE('',#13240,#13241);+#13240 = CARTESIAN_POINT('',(0.,0.));+#13241 = VECTOR('',#13242,1.);+#13242 = DIRECTION('',(0.,-1.));+#13243 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13244 = ADVANCED_FACE('',(#13245),#4672,.T.);+#13245 = FACE_BOUND('',#13246,.T.);+#13246 = EDGE_LOOP('',(#13247,#13248,#13249,#13250));+#13247 = ORIENTED_EDGE('',*,*,#4656,.T.);+#13248 = ORIENTED_EDGE('',*,*,#13224,.T.);+#13249 = ORIENTED_EDGE('',*,*,#13147,.T.);+#13250 = ORIENTED_EDGE('',*,*,#13251,.F.);+#13251 = EDGE_CURVE('',#4630,#13148,#13252,.T.);+#13252 = SURFACE_CURVE('',#13253,(#13257,#13264),.PCURVE_S1.);+#13253 = LINE('',#13254,#13255);+#13254 = CARTESIAN_POINT('',(-8.01445175446E-02,0.112302594736,1.8000001+ ));+#13255 = VECTOR('',#13256,1.);+#13256 = DIRECTION('',(-0.,-0.,-1.));+#13257 = PCURVE('',#4672,#13258);+#13258 = DEFINITIONAL_REPRESENTATION('',(#13259),#13263);+#13259 = LINE('',#13260,#13261);+#13260 = CARTESIAN_POINT('',(0.222834805534,0.));+#13261 = VECTOR('',#13262,1.);+#13262 = DIRECTION('',(0.,-1.));+#13263 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13264 = PCURVE('',#4645,#13265);+#13265 = DEFINITIONAL_REPRESENTATION('',(#13266),#13270);+#13266 = LINE('',#13267,#13268);+#13267 = CARTESIAN_POINT('',(0.,0.));+#13268 = VECTOR('',#13269,1.);+#13269 = DIRECTION('',(0.,-1.));+#13270 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13271 = ADVANCED_FACE('',(#13272),#4645,.T.);+#13272 = FACE_BOUND('',#13273,.T.);+#13273 = EDGE_LOOP('',(#13274,#13275,#13276,#13277));+#13274 = ORIENTED_EDGE('',*,*,#4629,.T.);+#13275 = ORIENTED_EDGE('',*,*,#13251,.T.);+#13276 = ORIENTED_EDGE('',*,*,#13170,.T.);+#13277 = ORIENTED_EDGE('',*,*,#13278,.F.);+#13278 = EDGE_CURVE('',#4603,#13055,#13279,.T.);+#13279 = SURFACE_CURVE('',#13280,(#13284,#13291),.PCURVE_S1.);+#13280 = LINE('',#13281,#13282);+#13281 = CARTESIAN_POINT('',(-5.020670848862E-02,0.112302594736,+ 1.8000001));+#13282 = VECTOR('',#13283,1.);+#13283 = DIRECTION('',(-0.,-0.,-1.));+#13284 = PCURVE('',#4645,#13285);+#13285 = DEFINITIONAL_REPRESENTATION('',(#13286),#13290);+#13286 = LINE('',#13287,#13288);+#13287 = CARTESIAN_POINT('',(2.993780905598E-02,0.));+#13288 = VECTOR('',#13289,1.);+#13289 = DIRECTION('',(0.,-1.));+#13290 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13291 = PCURVE('',#4618,#13292);+#13292 = DEFINITIONAL_REPRESENTATION('',(#13293),#13297);+#13293 = LINE('',#13294,#13295);+#13294 = CARTESIAN_POINT('',(0.,0.));+#13295 = VECTOR('',#13296,1.);+#13296 = DIRECTION('',(0.,-1.));+#13297 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13298 = ADVANCED_FACE('',(#13299),#4618,.T.);+#13299 = FACE_BOUND('',#13300,.T.);+#13300 = EDGE_LOOP('',(#13301,#13302,#13303,#13304));+#13301 = ORIENTED_EDGE('',*,*,#4602,.T.);+#13302 = ORIENTED_EDGE('',*,*,#13278,.T.);+#13303 = ORIENTED_EDGE('',*,*,#13054,.T.);+#13304 = ORIENTED_EDGE('',*,*,#13305,.F.);+#13305 = EDGE_CURVE('',#4576,#13057,#13306,.T.);+#13306 = SURFACE_CURVE('',#13307,(#13311,#13318),.PCURVE_S1.);+#13307 = LINE('',#13308,#13309);+#13308 = CARTESIAN_POINT('',(-7.162155276552E-05,-7.720803388121E-02,+ 1.8000001));+#13309 = VECTOR('',#13310,1.);+#13310 = DIRECTION('',(-0.,-0.,-1.));+#13311 = PCURVE('',#4618,#13312);+#13312 = DEFINITIONAL_REPRESENTATION('',(#13313),#13317);+#13313 = LINE('',#13314,#13315);+#13314 = CARTESIAN_POINT('',(0.196030113251,0.));+#13315 = VECTOR('',#13316,1.);+#13316 = DIRECTION('',(0.,-1.));+#13317 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13318 = PCURVE('',#4591,#13319);+#13319 = DEFINITIONAL_REPRESENTATION('',(#13320),#13324);+#13320 = LINE('',#13321,#13322);+#13321 = CARTESIAN_POINT('',(-2.328476608933E-19,0.));+#13322 = VECTOR('',#13323,1.);+#13323 = DIRECTION('',(0.,-1.));+#13324 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13325 = ADVANCED_FACE('',(#13326),#4591,.T.);+#13326 = FACE_BOUND('',#13327,.T.);+#13327 = EDGE_LOOP('',(#13328,#13329,#13330,#13331));+#13328 = ORIENTED_EDGE('',*,*,#4573,.T.);+#13329 = ORIENTED_EDGE('',*,*,#13305,.T.);+#13330 = ORIENTED_EDGE('',*,*,#13079,.T.);+#13331 = ORIENTED_EDGE('',*,*,#12979,.F.);+#13332 = ADVANCED_FACE('',(#13333),#4555,.T.);+#13333 = FACE_BOUND('',#13334,.T.);+#13334 = EDGE_LOOP('',(#13335,#13336,#13359,#13387));+#13335 = ORIENTED_EDGE('',*,*,#4537,.T.);+#13336 = ORIENTED_EDGE('',*,*,#13337,.T.);+#13337 = EDGE_CURVE('',#4347,#13338,#13340,.T.);+#13338 = VERTEX_POINT('',#13339);+#13339 = CARTESIAN_POINT('',(0.223530866181,8.623234952967E-02,1.7000001+ ));+#13340 = SURFACE_CURVE('',#13341,(#13345,#13352),.PCURVE_S1.);+#13341 = LINE('',#13342,#13343);+#13342 = CARTESIAN_POINT('',(0.223530866181,8.623234952967E-02,1.8000001+ ));+#13343 = VECTOR('',#13344,1.);+#13344 = DIRECTION('',(-0.,-0.,-1.));+#13345 = PCURVE('',#4555,#13346);+#13346 = DEFINITIONAL_REPRESENTATION('',(#13347),#13351);+#13347 = LINE('',#13348,#13349);+#13348 = CARTESIAN_POINT('',(0.,0.));+#13349 = VECTOR('',#13350,1.);+#13350 = DIRECTION('',(0.,-1.));+#13351 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13352 = PCURVE('',#4368,#13353);+#13353 = DEFINITIONAL_REPRESENTATION('',(#13354),#13358);+#13354 = LINE('',#13355,#13356);+#13355 = CARTESIAN_POINT('',(1.,0.));+#13356 = VECTOR('',#13357,1.);+#13357 = DIRECTION('',(0.,-1.));+#13358 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13359 = ORIENTED_EDGE('',*,*,#13360,.T.);+#13360 = EDGE_CURVE('',#13338,#13361,#13363,.T.);+#13361 = VERTEX_POINT('',#13362);+#13362 = CARTESIAN_POINT('',(0.246736249277,5.156751799116E-03,1.7000001+ ));+#13363 = SURFACE_CURVE('',#13364,(#13368,#13375),.PCURVE_S1.);+#13364 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#13365,#13366,#13367),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#13365 = CARTESIAN_POINT('',(0.223530866181,8.623234952967E-02,1.7000001+ ));+#13366 = CARTESIAN_POINT('',(0.246736249277,6.016210432302E-02,1.7000001+ ));+#13367 = CARTESIAN_POINT('',(0.246736249277,5.156751799116E-03,1.7000001+ ));+#13368 = PCURVE('',#4555,#13369);+#13369 = DEFINITIONAL_REPRESENTATION('',(#13370),#13374);+#13370 = LINE('',#13371,#13372);+#13371 = CARTESIAN_POINT('',(0.,-0.1));+#13372 = VECTOR('',#13373,1.);+#13373 = DIRECTION('',(1.,0.));+#13374 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13375 = PCURVE('',#13376,#13381);+#13376 = PLANE('',#13377);+#13377 = AXIS2_PLACEMENT_3D('',#13378,#13379,#13380);+#13378 = CARTESIAN_POINT('',(8.830937455987E-02,-0.101559361821,+ 1.7000001));+#13379 = DIRECTION('',(0.,0.,1.));+#13380 = DIRECTION('',(1.,0.,0.));+#13381 = DEFINITIONAL_REPRESENTATION('',(#13382),#13386);+#13382 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#13383,#13384,#13385),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#13383 = CARTESIAN_POINT('',(0.135221491621,0.187791711351));+#13384 = CARTESIAN_POINT('',(0.158426874717,0.161721466145));+#13385 = CARTESIAN_POINT('',(0.158426874717,0.106716113621));+#13386 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13387 = ORIENTED_EDGE('',*,*,#13388,.F.);+#13388 = EDGE_CURVE('',#4502,#13361,#13389,.T.);+#13389 = SURFACE_CURVE('',#13390,(#13394,#13401),.PCURVE_S1.);+#13390 = LINE('',#13391,#13392);+#13391 = CARTESIAN_POINT('',(0.246736249277,5.156751799116E-03,1.8000001+ ));+#13392 = VECTOR('',#13393,1.);+#13393 = DIRECTION('',(-0.,-0.,-1.));+#13394 = PCURVE('',#4555,#13395);+#13395 = DEFINITIONAL_REPRESENTATION('',(#13396),#13400);+#13396 = LINE('',#13397,#13398);+#13397 = CARTESIAN_POINT('',(1.,0.));+#13398 = VECTOR('',#13399,1.);+#13399 = DIRECTION('',(0.,-1.));+#13400 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13401 = PCURVE('',#4521,#13402);+#13402 = DEFINITIONAL_REPRESENTATION('',(#13403),#13407);+#13403 = LINE('',#13404,#13405);+#13404 = CARTESIAN_POINT('',(0.,0.));+#13405 = VECTOR('',#13406,1.);+#13406 = DIRECTION('',(0.,-1.));+#13407 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13408 = ADVANCED_FACE('',(#13409,#13548),#13376,.T.);+#13409 = FACE_BOUND('',#13410,.F.);+#13410 = EDGE_LOOP('',(#13411,#13436,#13457,#13458,#13481,#13504,#13527)+ );+#13411 = ORIENTED_EDGE('',*,*,#13412,.T.);+#13412 = EDGE_CURVE('',#13413,#13415,#13417,.T.);+#13413 = VERTEX_POINT('',#13414);+#13414 = CARTESIAN_POINT('',(0.107933680018,0.112302594736,1.7000001));+#13415 = VERTEX_POINT('',#13416);+#13416 = CARTESIAN_POINT('',(0.151336340994,0.112302594736,1.7000001));+#13417 = SURFACE_CURVE('',#13418,(#13422,#13429),.PCURVE_S1.);+#13418 = LINE('',#13419,#13420);+#13419 = CARTESIAN_POINT('',(0.107933680018,0.112302594736,1.7000001));+#13420 = VECTOR('',#13421,1.);+#13421 = DIRECTION('',(1.,0.,0.));+#13422 = PCURVE('',#13376,#13423);+#13423 = DEFINITIONAL_REPRESENTATION('',(#13424),#13428);+#13424 = LINE('',#13425,#13426);+#13425 = CARTESIAN_POINT('',(1.962430545775E-02,0.213861956558));+#13426 = VECTOR('',#13427,1.);+#13427 = DIRECTION('',(1.,0.));+#13428 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13429 = PCURVE('',#4400,#13430);+#13430 = DEFINITIONAL_REPRESENTATION('',(#13431),#13435);+#13431 = LINE('',#13432,#13433);+#13432 = CARTESIAN_POINT('',(0.,-0.1));+#13433 = VECTOR('',#13434,1.);+#13434 = DIRECTION('',(1.,0.));+#13435 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13436 = ORIENTED_EDGE('',*,*,#13437,.T.);+#13437 = EDGE_CURVE('',#13415,#13338,#13438,.T.);+#13438 = SURFACE_CURVE('',#13439,(#13443,#13450),.PCURVE_S1.);+#13439 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#13440,#13441,#13442),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#13440 = CARTESIAN_POINT('',(0.151336340994,0.112302594736,1.7000001));+#13441 = CARTESIAN_POINT('',(0.200325483085,0.112302594736,1.7000001));+#13442 = CARTESIAN_POINT('',(0.223530866181,8.623234952967E-02,1.7000001+ ));+#13443 = PCURVE('',#13376,#13444);+#13444 = DEFINITIONAL_REPRESENTATION('',(#13445),#13449);+#13445 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#13446,#13447,#13448),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#13446 = CARTESIAN_POINT('',(6.302696643364E-02,0.213861956558));+#13447 = CARTESIAN_POINT('',(0.112016108525,0.213861956558));+#13448 = CARTESIAN_POINT('',(0.135221491621,0.187791711351));+#13449 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13450 = PCURVE('',#4368,#13451);+#13451 = DEFINITIONAL_REPRESENTATION('',(#13452),#13456);+#13452 = LINE('',#13453,#13454);+#13453 = CARTESIAN_POINT('',(0.,-0.1));+#13454 = VECTOR('',#13455,1.);+#13455 = DIRECTION('',(1.,0.));+#13456 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13457 = ORIENTED_EDGE('',*,*,#13360,.T.);+#13458 = ORIENTED_EDGE('',*,*,#13459,.T.);+#13459 = EDGE_CURVE('',#13361,#13460,#13462,.T.);+#13460 = VERTEX_POINT('',#13461);+#13461 = CARTESIAN_POINT('',(0.223530866181,-7.556073816761E-02,+ 1.7000001));+#13462 = SURFACE_CURVE('',#13463,(#13467,#13474),.PCURVE_S1.);+#13463 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#13464,#13465,#13466),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#13464 = CARTESIAN_POINT('',(0.246736249277,5.156751799116E-03,1.7000001+ ));+#13465 = CARTESIAN_POINT('',(0.246736249277,-4.956211451373E-02,+ 1.7000001));+#13466 = CARTESIAN_POINT('',(0.223530866181,-7.556073816761E-02,+ 1.7000001));+#13467 = PCURVE('',#13376,#13468);+#13468 = DEFINITIONAL_REPRESENTATION('',(#13469),#13473);+#13469 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#13470,#13471,#13472),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#13470 = CARTESIAN_POINT('',(0.158426874717,0.106716113621));+#13471 = CARTESIAN_POINT('',(0.158426874717,5.199724730776E-02));+#13472 = CARTESIAN_POINT('',(0.135221491621,2.599862365388E-02));+#13473 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13474 = PCURVE('',#4521,#13475);+#13475 = DEFINITIONAL_REPRESENTATION('',(#13476),#13480);+#13476 = LINE('',#13477,#13478);+#13477 = CARTESIAN_POINT('',(0.,-0.1));+#13478 = VECTOR('',#13479,1.);+#13479 = DIRECTION('',(1.,0.));+#13480 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13481 = ORIENTED_EDGE('',*,*,#13482,.T.);+#13482 = EDGE_CURVE('',#13460,#13483,#13485,.T.);+#13483 = VERTEX_POINT('',#13484);+#13484 = CARTESIAN_POINT('',(0.151336340994,-0.101559361821,1.7000001));+#13485 = SURFACE_CURVE('',#13486,(#13490,#13497),.PCURVE_S1.);+#13486 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#13487,#13488,#13489),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#13487 = CARTESIAN_POINT('',(0.223530866181,-7.556073816761E-02,+ 1.7000001));+#13488 = CARTESIAN_POINT('',(0.200325483085,-0.101559361821,1.7000001));+#13489 = CARTESIAN_POINT('',(0.151336340994,-0.101559361821,1.7000001));+#13490 = PCURVE('',#13376,#13491);+#13491 = DEFINITIONAL_REPRESENTATION('',(#13492),#13496);+#13492 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#13493,#13494,#13495),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#13493 = CARTESIAN_POINT('',(0.135221491621,2.599862365388E-02));+#13494 = CARTESIAN_POINT('',(0.112016108525,0.));+#13495 = CARTESIAN_POINT('',(6.302696643364E-02,0.));+#13496 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13497 = PCURVE('',#4485,#13498);+#13498 = DEFINITIONAL_REPRESENTATION('',(#13499),#13503);+#13499 = LINE('',#13500,#13501);+#13500 = CARTESIAN_POINT('',(0.,-0.1));+#13501 = VECTOR('',#13502,1.);+#13502 = DIRECTION('',(1.,0.));+#13503 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13504 = ORIENTED_EDGE('',*,*,#13505,.T.);+#13505 = EDGE_CURVE('',#13483,#13506,#13508,.T.);+#13506 = VERTEX_POINT('',#13507);+#13507 = CARTESIAN_POINT('',(0.107933680018,-0.101559361821,1.7000001));+#13508 = SURFACE_CURVE('',#13509,(#13513,#13520),.PCURVE_S1.);+#13509 = LINE('',#13510,#13511);+#13510 = CARTESIAN_POINT('',(0.151336340994,-0.101559361821,1.7000001));+#13511 = VECTOR('',#13512,1.);+#13512 = DIRECTION('',(-1.,0.,0.));+#13513 = PCURVE('',#13376,#13514);+#13514 = DEFINITIONAL_REPRESENTATION('',(#13515),#13519);+#13515 = LINE('',#13516,#13517);+#13516 = CARTESIAN_POINT('',(6.302696643364E-02,0.));+#13517 = VECTOR('',#13518,1.);+#13518 = DIRECTION('',(-1.,0.));+#13519 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13520 = PCURVE('',#4454,#13521);+#13521 = DEFINITIONAL_REPRESENTATION('',(#13522),#13526);+#13522 = LINE('',#13523,#13524);+#13523 = CARTESIAN_POINT('',(0.,-0.1));+#13524 = VECTOR('',#13525,1.);+#13525 = DIRECTION('',(1.,0.));+#13526 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13527 = ORIENTED_EDGE('',*,*,#13528,.T.);+#13528 = EDGE_CURVE('',#13506,#13413,#13529,.T.);+#13529 = SURFACE_CURVE('',#13530,(#13534,#13541),.PCURVE_S1.);+#13530 = LINE('',#13531,#13532);+#13531 = CARTESIAN_POINT('',(0.107933680018,-0.101559361821,1.7000001));+#13532 = VECTOR('',#13533,1.);+#13533 = DIRECTION('',(0.,1.,0.));+#13534 = PCURVE('',#13376,#13535);+#13535 = DEFINITIONAL_REPRESENTATION('',(#13536),#13540);+#13536 = LINE('',#13537,#13538);+#13537 = CARTESIAN_POINT('',(1.962430545775E-02,0.));+#13538 = VECTOR('',#13539,1.);+#13539 = DIRECTION('',(0.,1.));+#13540 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13541 = PCURVE('',#4427,#13542);+#13542 = DEFINITIONAL_REPRESENTATION('',(#13543),#13547);+#13543 = LINE('',#13544,#13545);+#13544 = CARTESIAN_POINT('',(0.,-0.1));+#13545 = VECTOR('',#13546,1.);+#13546 = DIRECTION('',(1.,0.));+#13547 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13548 = FACE_BOUND('',#13549,.F.);+#13549 = EDGE_LOOP('',(#13550,#13580,#13610,#13640,#13670,#13700,#13728)+ );+#13550 = ORIENTED_EDGE('',*,*,#13551,.T.);+#13551 = EDGE_CURVE('',#13552,#13554,#13556,.T.);+#13552 = VERTEX_POINT('',#13553);+#13553 = CARTESIAN_POINT('',(0.13701203044,-7.778100630334E-02,1.7000001+ ));+#13554 = VERTEX_POINT('',#13555);+#13555 = CARTESIAN_POINT('',(0.150763368571,-7.778100630334E-02,+ 1.7000001));+#13556 = SURFACE_CURVE('',#13557,(#13561,#13568),.PCURVE_S1.);+#13557 = LINE('',#13558,#13559);+#13558 = CARTESIAN_POINT('',(0.13701203044,-7.778100630334E-02,1.7000001+ ));+#13559 = VECTOR('',#13560,1.);+#13560 = DIRECTION('',(1.,0.,0.));+#13561 = PCURVE('',#13376,#13562);+#13562 = DEFINITIONAL_REPRESENTATION('',(#13563),#13567);+#13563 = LINE('',#13564,#13565);+#13564 = CARTESIAN_POINT('',(4.870265588054E-02,2.377835551815E-02));+#13565 = VECTOR('',#13566,1.);+#13566 = DIRECTION('',(1.,0.));+#13567 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13568 = PCURVE('',#13569,#13574);+#13569 = PLANE('',#13570);+#13570 = AXIS2_PLACEMENT_3D('',#13571,#13572,#13573);+#13571 = CARTESIAN_POINT('',(0.13701203044,-7.778100630334E-02,1.8000001+ ));+#13572 = DIRECTION('',(0.,-1.,0.));+#13573 = DIRECTION('',(1.,0.,0.));+#13574 = DEFINITIONAL_REPRESENTATION('',(#13575),#13579);+#13575 = LINE('',#13576,#13577);+#13576 = CARTESIAN_POINT('',(0.,-0.1));+#13577 = VECTOR('',#13578,1.);+#13578 = DIRECTION('',(1.,0.));+#13579 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13580 = ORIENTED_EDGE('',*,*,#13581,.T.);+#13581 = EDGE_CURVE('',#13554,#13582,#13584,.T.);+#13582 = VERTEX_POINT('',#13583);+#13583 = CARTESIAN_POINT('',(0.20175791414,-5.980399655919E-02,1.7000001+ ));+#13584 = SURFACE_CURVE('',#13585,(#13589,#13596),.PCURVE_S1.);+#13585 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#13586,#13587,#13588),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#13586 = CARTESIAN_POINT('',(0.150763368571,-7.778100630334E-02,+ 1.7000001));+#13587 = CARTESIAN_POINT('',(0.187290360482,-7.778100630334E-02,+ 1.7000001));+#13588 = CARTESIAN_POINT('',(0.20175791414,-5.980399655919E-02,1.7000001+ ));+#13589 = PCURVE('',#13376,#13590);+#13590 = DEFINITIONAL_REPRESENTATION('',(#13591),#13595);+#13591 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#13592,#13593,#13594),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#13592 = CARTESIAN_POINT('',(6.245399401152E-02,2.377835551815E-02));+#13593 = CARTESIAN_POINT('',(9.898098592193E-02,2.377835551815E-02));+#13594 = CARTESIAN_POINT('',(0.113448539581,4.175536526229E-02));+#13595 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13596 = PCURVE('',#13597,#13604);+#13597 = SURFACE_OF_LINEAR_EXTRUSION('',#13598,#13602);+#13598 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#13599,#13600,#13601),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#13599 = CARTESIAN_POINT('',(0.150763368571,-7.778100630334E-02,+ 1.8000001));+#13600 = CARTESIAN_POINT('',(0.187290360482,-7.778100630334E-02,+ 1.8000001));+#13601 = CARTESIAN_POINT('',(0.20175791414,-5.980399655919E-02,1.8000001+ ));+#13602 = VECTOR('',#13603,1.);+#13603 = DIRECTION('',(0.,0.,1.));+#13604 = DEFINITIONAL_REPRESENTATION('',(#13605),#13609);+#13605 = LINE('',#13606,#13607);+#13606 = CARTESIAN_POINT('',(0.,-0.1));+#13607 = VECTOR('',#13608,1.);+#13608 = DIRECTION('',(1.,0.));+#13609 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13610 = ORIENTED_EDGE('',*,*,#13611,.T.);+#13611 = EDGE_CURVE('',#13582,#13612,#13614,.T.);+#13612 = VERTEX_POINT('',#13613);+#13613 = CARTESIAN_POINT('',(0.216225467799,5.156751799116E-03,1.7000001+ ));+#13614 = SURFACE_CURVE('',#13615,(#13619,#13626),.PCURVE_S1.);+#13615 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#13616,#13617,#13618),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#13616 = CARTESIAN_POINT('',(0.20175791414,-5.980399655919E-02,1.7000001+ ));+#13617 = CARTESIAN_POINT('',(0.216225467799,-4.182698681505E-02,+ 1.7000001));+#13618 = CARTESIAN_POINT('',(0.216225467799,5.156751799116E-03,1.7000001+ ));+#13619 = PCURVE('',#13376,#13620);+#13620 = DEFINITIONAL_REPRESENTATION('',(#13621),#13625);+#13621 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#13622,#13623,#13624),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#13622 = CARTESIAN_POINT('',(0.113448539581,4.175536526229E-02));+#13623 = CARTESIAN_POINT('',(0.127916093239,5.973237500643E-02));+#13624 = CARTESIAN_POINT('',(0.127916093239,0.106716113621));+#13625 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13626 = PCURVE('',#13627,#13634);+#13627 = SURFACE_OF_LINEAR_EXTRUSION('',#13628,#13632);+#13628 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#13629,#13630,#13631),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#13629 = CARTESIAN_POINT('',(0.20175791414,-5.980399655919E-02,1.8000001+ ));+#13630 = CARTESIAN_POINT('',(0.216225467799,-4.182698681505E-02,+ 1.8000001));+#13631 = CARTESIAN_POINT('',(0.216225467799,5.156751799116E-03,1.8000001+ ));+#13632 = VECTOR('',#13633,1.);+#13633 = DIRECTION('',(0.,0.,1.));+#13634 = DEFINITIONAL_REPRESENTATION('',(#13635),#13639);+#13635 = LINE('',#13636,#13637);+#13636 = CARTESIAN_POINT('',(0.,-0.1));+#13637 = VECTOR('',#13638,1.);+#13638 = DIRECTION('',(1.,0.));+#13639 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13640 = ORIENTED_EDGE('',*,*,#13641,.T.);+#13641 = EDGE_CURVE('',#13612,#13642,#13644,.T.);+#13642 = VERTEX_POINT('',#13643);+#13643 = CARTESIAN_POINT('',(0.201829535693,7.054722947402E-02,1.7000001+ ));+#13644 = SURFACE_CURVE('',#13645,(#13649,#13656),.PCURVE_S1.);+#13645 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#13646,#13647,#13648),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#13646 = CARTESIAN_POINT('',(0.216225467799,5.156751799116E-03,1.7000001+ ));+#13647 = CARTESIAN_POINT('',(0.216225467799,5.257021972988E-02,1.7000001+ ));+#13648 = CARTESIAN_POINT('',(0.201829535693,7.054722947402E-02,1.7000001+ ));+#13649 = PCURVE('',#13376,#13650);+#13650 = DEFINITIONAL_REPRESENTATION('',(#13651),#13655);+#13651 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#13652,#13653,#13654),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#13652 = CARTESIAN_POINT('',(0.127916093239,0.106716113621));+#13653 = CARTESIAN_POINT('',(0.127916093239,0.154129581551));+#13654 = CARTESIAN_POINT('',(0.113520161133,0.172106591296));+#13655 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13656 = PCURVE('',#13657,#13664);+#13657 = SURFACE_OF_LINEAR_EXTRUSION('',#13658,#13662);+#13658 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#13659,#13660,#13661),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#13659 = CARTESIAN_POINT('',(0.216225467799,5.156751799116E-03,1.8000001+ ));+#13660 = CARTESIAN_POINT('',(0.216225467799,5.257021972988E-02,1.8000001+ ));+#13661 = CARTESIAN_POINT('',(0.201829535693,7.054722947402E-02,1.8000001+ ));+#13662 = VECTOR('',#13663,1.);+#13663 = DIRECTION('',(0.,0.,1.));+#13664 = DEFINITIONAL_REPRESENTATION('',(#13665),#13669);+#13665 = LINE('',#13666,#13667);+#13666 = CARTESIAN_POINT('',(0.,-0.1));+#13667 = VECTOR('',#13668,1.);+#13668 = DIRECTION('',(1.,0.));+#13669 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13670 = ORIENTED_EDGE('',*,*,#13671,.T.);+#13671 = EDGE_CURVE('',#13642,#13672,#13674,.T.);+#13672 = VERTEX_POINT('',#13673);+#13673 = CARTESIAN_POINT('',(0.150763368571,8.852423921816E-02,1.7000001+ ));+#13674 = SURFACE_CURVE('',#13675,(#13679,#13686),.PCURVE_S1.);+#13675 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#13676,#13677,#13678),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#13676 = CARTESIAN_POINT('',(0.201829535693,7.054722947402E-02,1.7000001+ ));+#13677 = CARTESIAN_POINT('',(0.187433603587,8.852423921816E-02,1.7000001+ ));+#13678 = CARTESIAN_POINT('',(0.150763368571,8.852423921816E-02,1.7000001+ ));+#13679 = PCURVE('',#13376,#13680);+#13680 = DEFINITIONAL_REPRESENTATION('',(#13681),#13685);+#13681 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#13682,#13683,#13684),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#13682 = CARTESIAN_POINT('',(0.113520161133,0.172106591296));+#13683 = CARTESIAN_POINT('',(9.912422902746E-02,0.19008360104));+#13684 = CARTESIAN_POINT('',(6.245399401152E-02,0.19008360104));+#13685 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13686 = PCURVE('',#13687,#13694);+#13687 = SURFACE_OF_LINEAR_EXTRUSION('',#13688,#13692);+#13688 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#13689,#13690,#13691),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#13689 = CARTESIAN_POINT('',(0.201829535693,7.054722947402E-02,1.8000001+ ));+#13690 = CARTESIAN_POINT('',(0.187433603587,8.852423921816E-02,1.8000001+ ));+#13691 = CARTESIAN_POINT('',(0.150763368571,8.852423921816E-02,1.8000001+ ));+#13692 = VECTOR('',#13693,1.);+#13693 = DIRECTION('',(0.,0.,1.));+#13694 = DEFINITIONAL_REPRESENTATION('',(#13695),#13699);+#13695 = LINE('',#13696,#13697);+#13696 = CARTESIAN_POINT('',(0.,-0.1));+#13697 = VECTOR('',#13698,1.);+#13698 = DIRECTION('',(1.,0.));+#13699 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13700 = ORIENTED_EDGE('',*,*,#13701,.T.);+#13701 = EDGE_CURVE('',#13672,#13702,#13704,.T.);+#13702 = VERTEX_POINT('',#13703);+#13703 = CARTESIAN_POINT('',(0.13701203044,8.852423921816E-02,1.7000001)+ );+#13704 = SURFACE_CURVE('',#13705,(#13709,#13716),.PCURVE_S1.);+#13705 = LINE('',#13706,#13707);+#13706 = CARTESIAN_POINT('',(0.150763368571,8.852423921816E-02,1.7000001+ ));+#13707 = VECTOR('',#13708,1.);+#13708 = DIRECTION('',(-1.,0.,0.));+#13709 = PCURVE('',#13376,#13710);+#13710 = DEFINITIONAL_REPRESENTATION('',(#13711),#13715);+#13711 = LINE('',#13712,#13713);+#13712 = CARTESIAN_POINT('',(6.245399401152E-02,0.19008360104));+#13713 = VECTOR('',#13714,1.);+#13714 = DIRECTION('',(-1.,0.));+#13715 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13716 = PCURVE('',#13717,#13722);+#13717 = PLANE('',#13718);+#13718 = AXIS2_PLACEMENT_3D('',#13719,#13720,#13721);+#13719 = CARTESIAN_POINT('',(0.150763368571,8.852423921816E-02,1.8000001+ ));+#13720 = DIRECTION('',(0.,1.,0.));+#13721 = DIRECTION('',(-1.,0.,0.));+#13722 = DEFINITIONAL_REPRESENTATION('',(#13723),#13727);+#13723 = LINE('',#13724,#13725);+#13724 = CARTESIAN_POINT('',(0.,-0.1));+#13725 = VECTOR('',#13726,1.);+#13726 = DIRECTION('',(1.,0.));+#13727 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13728 = ORIENTED_EDGE('',*,*,#13729,.T.);+#13729 = EDGE_CURVE('',#13702,#13552,#13730,.T.);+#13730 = SURFACE_CURVE('',#13731,(#13735,#13742),.PCURVE_S1.);+#13731 = LINE('',#13732,#13733);+#13732 = CARTESIAN_POINT('',(0.13701203044,8.852423921816E-02,1.7000001)+ );+#13733 = VECTOR('',#13734,1.);+#13734 = DIRECTION('',(0.,-1.,0.));+#13735 = PCURVE('',#13376,#13736);+#13736 = DEFINITIONAL_REPRESENTATION('',(#13737),#13741);+#13737 = LINE('',#13738,#13739);+#13738 = CARTESIAN_POINT('',(4.870265588054E-02,0.19008360104));+#13739 = VECTOR('',#13740,1.);+#13740 = DIRECTION('',(0.,-1.));+#13741 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13742 = PCURVE('',#13743,#13748);+#13743 = PLANE('',#13744);+#13744 = AXIS2_PLACEMENT_3D('',#13745,#13746,#13747);+#13745 = CARTESIAN_POINT('',(0.13701203044,8.852423921816E-02,1.8000001)+ );+#13746 = DIRECTION('',(-1.,0.,0.));+#13747 = DIRECTION('',(0.,-1.,0.));+#13748 = DEFINITIONAL_REPRESENTATION('',(#13749),#13753);+#13749 = LINE('',#13750,#13751);+#13750 = CARTESIAN_POINT('',(0.,-0.1));+#13751 = VECTOR('',#13752,1.);+#13752 = DIRECTION('',(1.,0.));+#13753 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13754 = ADVANCED_FACE('',(#13755),#13743,.T.);+#13755 = FACE_BOUND('',#13756,.T.);+#13756 = EDGE_LOOP('',(#13757,#13785,#13806,#13807));+#13757 = ORIENTED_EDGE('',*,*,#13758,.T.);+#13758 = EDGE_CURVE('',#13759,#13761,#13763,.T.);+#13759 = VERTEX_POINT('',#13760);+#13760 = CARTESIAN_POINT('',(0.13701203044,-7.778100630334E-02,1.75));+#13761 = VERTEX_POINT('',#13762);+#13762 = CARTESIAN_POINT('',(0.13701203044,8.852423921816E-02,1.75));+#13763 = SURFACE_CURVE('',#13764,(#13768,#13774),.PCURVE_S1.);+#13764 = LINE('',#13765,#13766);+#13765 = CARTESIAN_POINT('',(0.13701203044,1.174347759992,1.75));+#13766 = VECTOR('',#13767,1.);+#13767 = DIRECTION('',(0.,1.,0.));+#13768 = PCURVE('',#13743,#13769);+#13769 = DEFINITIONAL_REPRESENTATION('',(#13770),#13773);+#13770 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#13771,#13772),.UNSPECIFIED.,+ .F.,.F.,(2,2),(-1.252128766295,-1.085823520773),+ .PIECEWISE_BEZIER_KNOTS.);+#13771 = CARTESIAN_POINT('',(0.166305245521,-5.00001E-02));+#13772 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#13773 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13774 = PCURVE('',#13775,#13780);+#13775 = PLANE('',#13776);+#13776 = AXIS2_PLACEMENT_3D('',#13777,#13778,#13779);+#13777 = CARTESIAN_POINT('',(-1.680085640382,2.260171280765,1.75));+#13778 = DIRECTION('',(0.,0.,-1.));+#13779 = DIRECTION('',(0.596575959062,-0.802556617983,0.));+#13780 = DEFINITIONAL_REPRESENTATION('',(#13781),#13784);+#13781 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#13782,#13783),.UNSPECIFIED.,+ .F.,.F.,(2,2),(-1.252128766295,-1.085823520773),+ .PIECEWISE_BEZIER_KNOTS.);+#13782 = CARTESIAN_POINT('',(2.960375866197,-6.355763334106E-02));+#13783 = CARTESIAN_POINT('',(2.826906490798,-0.162771344685));+#13784 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13785 = ORIENTED_EDGE('',*,*,#13786,.T.);+#13786 = EDGE_CURVE('',#13761,#13702,#13787,.T.);+#13787 = SURFACE_CURVE('',#13788,(#13792,#13799),.PCURVE_S1.);+#13788 = LINE('',#13789,#13790);+#13789 = CARTESIAN_POINT('',(0.13701203044,8.852423921816E-02,1.8000001)+ );+#13790 = VECTOR('',#13791,1.);+#13791 = DIRECTION('',(-0.,-0.,-1.));+#13792 = PCURVE('',#13743,#13793);+#13793 = DEFINITIONAL_REPRESENTATION('',(#13794),#13798);+#13794 = LINE('',#13795,#13796);+#13795 = CARTESIAN_POINT('',(0.,0.));+#13796 = VECTOR('',#13797,1.);+#13797 = DIRECTION('',(0.,-1.));+#13798 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13799 = PCURVE('',#13717,#13800);+#13800 = DEFINITIONAL_REPRESENTATION('',(#13801),#13805);+#13801 = LINE('',#13802,#13803);+#13802 = CARTESIAN_POINT('',(1.375133813098E-02,0.));+#13803 = VECTOR('',#13804,1.);+#13804 = DIRECTION('',(0.,-1.));+#13805 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13806 = ORIENTED_EDGE('',*,*,#13729,.T.);+#13807 = ORIENTED_EDGE('',*,*,#13808,.F.);+#13808 = EDGE_CURVE('',#13759,#13552,#13809,.T.);+#13809 = SURFACE_CURVE('',#13810,(#13814,#13821),.PCURVE_S1.);+#13810 = LINE('',#13811,#13812);+#13811 = CARTESIAN_POINT('',(0.13701203044,-7.778100630334E-02,1.8000001+ ));+#13812 = VECTOR('',#13813,1.);+#13813 = DIRECTION('',(-0.,-0.,-1.));+#13814 = PCURVE('',#13743,#13815);+#13815 = DEFINITIONAL_REPRESENTATION('',(#13816),#13820);+#13816 = LINE('',#13817,#13818);+#13817 = CARTESIAN_POINT('',(0.166305245521,0.));+#13818 = VECTOR('',#13819,1.);+#13819 = DIRECTION('',(0.,-1.));+#13820 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13821 = PCURVE('',#13569,#13822);+#13822 = DEFINITIONAL_REPRESENTATION('',(#13823),#13827);+#13823 = LINE('',#13824,#13825);+#13824 = CARTESIAN_POINT('',(0.,0.));+#13825 = VECTOR('',#13826,1.);+#13826 = DIRECTION('',(0.,-1.));+#13827 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13828 = ADVANCED_FACE('',(#13829),#13775,.F.);+#13829 = FACE_BOUND('',#13830,.F.);+#13830 = EDGE_LOOP('',(#13831,#13862,#13881,#13882,#13903,#13932,#13961)+ );+#13831 = ORIENTED_EDGE('',*,*,#13832,.T.);+#13832 = EDGE_CURVE('',#13833,#13835,#13837,.T.);+#13833 = VERTEX_POINT('',#13834);+#13834 = CARTESIAN_POINT('',(0.20175791414,-5.980399655919E-02,1.75));+#13835 = VERTEX_POINT('',#13836);+#13836 = CARTESIAN_POINT('',(0.150763368571,-7.778100630334E-02,1.75));+#13837 = SURFACE_CURVE('',#13838,(#13844,#13853),.PCURVE_S1.);+#13838 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#13839,#13840,#13841,#13842,+ #13843),.UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),+ .PIECEWISE_BEZIER_KNOTS.);+#13839 = CARTESIAN_POINT('',(0.20175791414,-5.980399655919E-02,1.75));+#13840 = CARTESIAN_POINT('',(0.194520300989,-6.879726834612E-02,1.75));+#13841 = CARTESIAN_POINT('',(0.183602160193,-7.479123690539E-02,1.75));+#13842 = CARTESIAN_POINT('',(0.169007381751,-7.778100630334E-02,1.75));+#13843 = CARTESIAN_POINT('',(0.150763368571,-7.778100630334E-02,1.75));+#13844 = PCURVE('',#13775,#13845);+#13845 = DEFINITIONAL_REPRESENTATION('',(#13846),#13852);+#13846 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#13847,#13848,#13849,#13850,+ #13851),.UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),+ .PIECEWISE_BEZIER_KNOTS.);+#13847 = CARTESIAN_POINT('',(2.984574135719,-0.126244522621));+#13848 = CARTESIAN_POINT('',(2.987473959502,-0.115070758547));+#13849 = CARTESIAN_POINT('',(2.98577095832,-0.102732474852));+#13850 = CARTESIAN_POINT('',(2.97946352359,-8.923571427984E-02));+#13851 = CARTESIAN_POINT('',(2.968579583931,-7.45938607642E-02));+#13852 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13853 = PCURVE('',#13597,#13854);+#13854 = DEFINITIONAL_REPRESENTATION('',(#13855),#13861);+#13855 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#13856,#13857,#13858,#13859,+ #13860),.UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),+ .PIECEWISE_BEZIER_KNOTS.);+#13856 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#13857 = CARTESIAN_POINT('',(0.749867416358,-5.00001E-02));+#13858 = CARTESIAN_POINT('',(0.499733357801,-5.00001E-02));+#13859 = CARTESIAN_POINT('',(0.249733309878,-5.00001E-02));+#13860 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#13861 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13862 = ORIENTED_EDGE('',*,*,#13863,.T.);+#13863 = EDGE_CURVE('',#13835,#13759,#13864,.T.);+#13864 = SURFACE_CURVE('',#13865,(#13869,#13875),.PCURVE_S1.);+#13865 = LINE('',#13866,#13867);+#13866 = CARTESIAN_POINT('',(-0.771536804971,-7.778100630334E-02,1.75));+#13867 = VECTOR('',#13868,1.);+#13868 = DIRECTION('',(-1.,-0.,-0.));+#13869 = PCURVE('',#13775,#13870);+#13870 = DEFINITIONAL_REPRESENTATION('',(#13871),#13874);+#13871 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#13872,#13873),.UNSPECIFIED.,+ .F.,.F.,(2,2),(-0.922300173542,-0.908548835411),+ .PIECEWISE_BEZIER_KNOTS.);+#13872 = CARTESIAN_POINT('',(2.968579583931,-7.45938607642E-02));+#13873 = CARTESIAN_POINT('',(2.960375866197,-6.355763334106E-02));+#13874 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13875 = PCURVE('',#13569,#13876);+#13876 = DEFINITIONAL_REPRESENTATION('',(#13877),#13880);+#13877 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#13878,#13879),.UNSPECIFIED.,+ .F.,.F.,(2,2),(-0.922300173542,-0.908548835411),+ .PIECEWISE_BEZIER_KNOTS.);+#13878 = CARTESIAN_POINT('',(1.375133813098E-02,-5.00001E-02));+#13879 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#13880 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13881 = ORIENTED_EDGE('',*,*,#13758,.T.);+#13882 = ORIENTED_EDGE('',*,*,#13883,.T.);+#13883 = EDGE_CURVE('',#13761,#13884,#13886,.T.);+#13884 = VERTEX_POINT('',#13885);+#13885 = CARTESIAN_POINT('',(0.150763368571,8.852423921816E-02,1.75));+#13886 = SURFACE_CURVE('',#13887,(#13891,#13897),.PCURVE_S1.);+#13887 = LINE('',#13888,#13889);+#13888 = CARTESIAN_POINT('',(-0.764661135905,8.852423921816E-02,1.75));+#13889 = VECTOR('',#13890,1.);+#13890 = DIRECTION('',(1.,-0.,0.));+#13891 = PCURVE('',#13775,#13892);+#13892 = DEFINITIONAL_REPRESENTATION('',(#13893),#13896);+#13893 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#13894,#13895),.UNSPECIFIED.,+ .F.,.F.,(2,2),(0.901673166346,0.915424504477),+ .PIECEWISE_BEZIER_KNOTS.);+#13894 = CARTESIAN_POINT('',(2.826906490798,-0.162771344685));+#13895 = CARTESIAN_POINT('',(2.835110208532,-0.173807572108));+#13896 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13897 = PCURVE('',#13717,#13898);+#13898 = DEFINITIONAL_REPRESENTATION('',(#13899),#13902);+#13899 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#13900,#13901),.UNSPECIFIED.,+ .F.,.F.,(2,2),(0.901673166346,0.915424504477),+ .PIECEWISE_BEZIER_KNOTS.);+#13900 = CARTESIAN_POINT('',(1.375133813098E-02,-5.00001E-02));+#13901 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#13902 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13903 = ORIENTED_EDGE('',*,*,#13904,.T.);+#13904 = EDGE_CURVE('',#13884,#13905,#13907,.T.);+#13905 = VERTEX_POINT('',#13906);+#13906 = CARTESIAN_POINT('',(0.201829535693,7.054722947402E-02,1.75));+#13907 = SURFACE_CURVE('',#13908,(#13914,#13923),.PCURVE_S1.);+#13908 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#13909,#13910,#13911,#13912,+ #13913),.UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),+ .PIECEWISE_BEZIER_KNOTS.);+#13909 = CARTESIAN_POINT('',(0.150763368571,8.852423921816E-02,1.75));+#13910 = CARTESIAN_POINT('',(0.169078640481,8.852423921816E-02,1.75));+#13911 = CARTESIAN_POINT('',(0.183709402634,8.553456360236E-02,1.75));+#13912 = CARTESIAN_POINT('',(0.194627685003,7.954058531056E-02,1.75));+#13913 = CARTESIAN_POINT('',(0.201829535693,7.054722947402E-02,1.75));+#13914 = PCURVE('',#13775,#13915);+#13915 = DEFINITIONAL_REPRESENTATION('',(#13916),#13922);+#13916 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#13917,#13918,#13919,#13920,+ #13921),.UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),+ .PIECEWISE_BEZIER_KNOTS.);+#13917 = CARTESIAN_POINT('',(2.835110208532,-0.173807572108));+#13918 = CARTESIAN_POINT('',(2.846036659437,-0.188506614789));+#13919 = CARTESIAN_POINT('',(2.857164404352,-0.198465061184));+#13920 = CARTESIAN_POINT('',(2.868488496073,-0.203651737608));+#13921 = CARTESIAN_POINT('',(2.8800026243,-0.204066410658));+#13922 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13923 = PCURVE('',#13687,#13924);+#13924 = DEFINITIONAL_REPRESENTATION('',(#13925),#13931);+#13925 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#13926,#13927,#13928,#13929,+ #13930),.UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),+ .PIECEWISE_BEZIER_KNOTS.);+#13926 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#13927 = CARTESIAN_POINT('',(0.750270595463,-5.00001E-02));+#13928 = CARTESIAN_POINT('',(0.500270816961,-5.00001E-02));+#13929 = CARTESIAN_POINT('',(0.250134921339,-5.00001E-02));+#13930 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#13931 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13932 = ORIENTED_EDGE('',*,*,#13933,.T.);+#13933 = EDGE_CURVE('',#13905,#13934,#13936,.T.);+#13934 = VERTEX_POINT('',#13935);+#13935 = CARTESIAN_POINT('',(0.216225467799,5.156751799116E-03,1.75));+#13936 = SURFACE_CURVE('',#13937,(#13943,#13952),.PCURVE_S1.);+#13937 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#13938,#13939,#13940,#13941,+ #13942),.UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),+ .PIECEWISE_BEZIER_KNOTS.);+#13938 = CARTESIAN_POINT('',(0.201829535693,7.054722947402E-02,1.75));+#13939 = CARTESIAN_POINT('',(0.209037256866,6.154654283568E-02,1.75));+#13940 = CARTESIAN_POINT('',(0.213836042185,4.763028250566E-02,1.75));+#13941 = CARTESIAN_POINT('',(0.216225467799,2.88146538057E-02,1.75));+#13942 = CARTESIAN_POINT('',(0.216225467799,5.156751799116E-03,1.75));+#13943 = PCURVE('',#13775,#13944);+#13944 = DEFINITIONAL_REPRESENTATION('',(#13945),#13951);+#13945 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#13946,#13947,#13948,#13949,+ #13950),.UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),+ .PIECEWISE_BEZIER_KNOTS.);+#13946 = CARTESIAN_POINT('',(2.8800026243,-0.204066410658));+#13947 = CARTESIAN_POINT('',(2.891526138099,-0.204481421722));+#13948 = CARTESIAN_POINT('',(2.905557564879,-0.200030612285));+#13949 = CARTESIAN_POINT('',(2.922083646091,-0.190723309888));+#13950 = CARTESIAN_POINT('',(2.941070451914,-0.176609574309));+#13951 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13952 = PCURVE('',#13657,#13953);+#13953 = DEFINITIONAL_REPRESENTATION('',(#13954),#13960);+#13954 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#13955,#13956,#13957,#13958,+ #13959),.UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),+ .PIECEWISE_BEZIER_KNOTS.);+#13955 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#13956 = CARTESIAN_POINT('',(0.749661184857,-5.00001E-02));+#13957 = CARTESIAN_POINT('',(0.49942952085,-5.00001E-02));+#13958 = CARTESIAN_POINT('',(0.249485041266,-5.00001E-02));+#13959 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#13960 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13961 = ORIENTED_EDGE('',*,*,#13962,.T.);+#13962 = EDGE_CURVE('',#13934,#13833,#13963,.T.);+#13963 = SURFACE_CURVE('',#13964,(#13970,#13979),.PCURVE_S1.);+#13964 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#13965,#13966,#13967,#13968,+ #13969),.UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),+ .PIECEWISE_BEZIER_KNOTS.);+#13965 = CARTESIAN_POINT('',(0.216225467799,5.156751799116E-03,1.75));+#13966 = CARTESIAN_POINT('',(0.216225467799,-1.828789514541E-02,1.75));+#13967 = CARTESIAN_POINT('',(0.213823914395,-3.695971332718E-02,1.75));+#13968 = CARTESIAN_POINT('',(0.209001242813,-5.080362281259E-02,1.75));+#13969 = CARTESIAN_POINT('',(0.20175791414,-5.980399655919E-02,1.75));+#13970 = PCURVE('',#13775,#13971);+#13971 = DEFINITIONAL_REPRESENTATION('',(#13972),#13978);+#13972 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#13973,#13974,#13975,#13976,+ #13977),.UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),+ .PIECEWISE_BEZIER_KNOTS.);+#13973 = CARTESIAN_POINT('',(2.941070451914,-0.176609574309));+#13974 = CARTESIAN_POINT('',(2.959886108475,-0.162623061573));+#13975 = CARTESIAN_POINT('',(2.973438590702,-0.149556521156));+#13976 = CARTESIAN_POINT('',(2.981672021954,-0.137427110583));+#13977 = CARTESIAN_POINT('',(2.984574135719,-0.126244522621));+#13978 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13979 = PCURVE('',#13627,#13980);+#13980 = DEFINITIONAL_REPRESENTATION('',(#13981),#13987);+#13981 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#13982,#13983,#13984,#13985,+ #13986),.UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),+ .PIECEWISE_BEZIER_KNOTS.);+#13982 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#13983 = CARTESIAN_POINT('',(0.750502539431,-5.00001E-02));+#13984 = CARTESIAN_POINT('',(0.500556339319,-5.00001E-02));+#13985 = CARTESIAN_POINT('',(0.250330112591,-5.00001E-02));+#13986 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#13987 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13988 = ADVANCED_FACE('',(#13989),#13717,.T.);+#13989 = FACE_BOUND('',#13990,.T.);+#13990 = EDGE_LOOP('',(#13991,#13992,#14013,#14014));+#13991 = ORIENTED_EDGE('',*,*,#13883,.T.);+#13992 = ORIENTED_EDGE('',*,*,#13993,.T.);+#13993 = EDGE_CURVE('',#13884,#13672,#13994,.T.);+#13994 = SURFACE_CURVE('',#13995,(#13999,#14006),.PCURVE_S1.);+#13995 = LINE('',#13996,#13997);+#13996 = CARTESIAN_POINT('',(0.150763368571,8.852423921816E-02,1.8000001+ ));+#13997 = VECTOR('',#13998,1.);+#13998 = DIRECTION('',(-0.,-0.,-1.));+#13999 = PCURVE('',#13717,#14000);+#14000 = DEFINITIONAL_REPRESENTATION('',(#14001),#14005);+#14001 = LINE('',#14002,#14003);+#14002 = CARTESIAN_POINT('',(0.,0.));+#14003 = VECTOR('',#14004,1.);+#14004 = DIRECTION('',(0.,-1.));+#14005 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14006 = PCURVE('',#13687,#14007);+#14007 = DEFINITIONAL_REPRESENTATION('',(#14008),#14012);+#14008 = LINE('',#14009,#14010);+#14009 = CARTESIAN_POINT('',(1.,0.));+#14010 = VECTOR('',#14011,1.);+#14011 = DIRECTION('',(0.,-1.));+#14012 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14013 = ORIENTED_EDGE('',*,*,#13701,.T.);+#14014 = ORIENTED_EDGE('',*,*,#13786,.F.);+#14015 = ADVANCED_FACE('',(#14016),#13687,.T.);+#14016 = FACE_BOUND('',#14017,.T.);+#14017 = EDGE_LOOP('',(#14018,#14019,#14040,#14041));+#14018 = ORIENTED_EDGE('',*,*,#13904,.T.);+#14019 = ORIENTED_EDGE('',*,*,#14020,.T.);+#14020 = EDGE_CURVE('',#13905,#13642,#14021,.T.);+#14021 = SURFACE_CURVE('',#14022,(#14026,#14033),.PCURVE_S1.);+#14022 = LINE('',#14023,#14024);+#14023 = CARTESIAN_POINT('',(0.201829535693,7.054722947402E-02,1.8000001+ ));+#14024 = VECTOR('',#14025,1.);+#14025 = DIRECTION('',(-0.,-0.,-1.));+#14026 = PCURVE('',#13687,#14027);+#14027 = DEFINITIONAL_REPRESENTATION('',(#14028),#14032);+#14028 = LINE('',#14029,#14030);+#14029 = CARTESIAN_POINT('',(0.,0.));+#14030 = VECTOR('',#14031,1.);+#14031 = DIRECTION('',(0.,-1.));+#14032 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14033 = PCURVE('',#13657,#14034);+#14034 = DEFINITIONAL_REPRESENTATION('',(#14035),#14039);+#14035 = LINE('',#14036,#14037);+#14036 = CARTESIAN_POINT('',(1.,0.));+#14037 = VECTOR('',#14038,1.);+#14038 = DIRECTION('',(0.,-1.));+#14039 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14040 = ORIENTED_EDGE('',*,*,#13671,.T.);+#14041 = ORIENTED_EDGE('',*,*,#13993,.F.);+#14042 = ADVANCED_FACE('',(#14043),#13657,.T.);+#14043 = FACE_BOUND('',#14044,.T.);+#14044 = EDGE_LOOP('',(#14045,#14046,#14067,#14068));+#14045 = ORIENTED_EDGE('',*,*,#13933,.T.);+#14046 = ORIENTED_EDGE('',*,*,#14047,.T.);+#14047 = EDGE_CURVE('',#13934,#13612,#14048,.T.);+#14048 = SURFACE_CURVE('',#14049,(#14053,#14060),.PCURVE_S1.);+#14049 = LINE('',#14050,#14051);+#14050 = CARTESIAN_POINT('',(0.216225467799,5.156751799116E-03,1.8000001+ ));+#14051 = VECTOR('',#14052,1.);+#14052 = DIRECTION('',(-0.,-0.,-1.));+#14053 = PCURVE('',#13657,#14054);+#14054 = DEFINITIONAL_REPRESENTATION('',(#14055),#14059);+#14055 = LINE('',#14056,#14057);+#14056 = CARTESIAN_POINT('',(0.,0.));+#14057 = VECTOR('',#14058,1.);+#14058 = DIRECTION('',(0.,-1.));+#14059 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14060 = PCURVE('',#13627,#14061);+#14061 = DEFINITIONAL_REPRESENTATION('',(#14062),#14066);+#14062 = LINE('',#14063,#14064);+#14063 = CARTESIAN_POINT('',(1.,0.));+#14064 = VECTOR('',#14065,1.);+#14065 = DIRECTION('',(0.,-1.));+#14066 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14067 = ORIENTED_EDGE('',*,*,#13641,.T.);+#14068 = ORIENTED_EDGE('',*,*,#14020,.F.);+#14069 = ADVANCED_FACE('',(#14070),#13627,.T.);+#14070 = FACE_BOUND('',#14071,.T.);+#14071 = EDGE_LOOP('',(#14072,#14073,#14094,#14095));+#14072 = ORIENTED_EDGE('',*,*,#13962,.T.);+#14073 = ORIENTED_EDGE('',*,*,#14074,.T.);+#14074 = EDGE_CURVE('',#13833,#13582,#14075,.T.);+#14075 = SURFACE_CURVE('',#14076,(#14080,#14087),.PCURVE_S1.);+#14076 = LINE('',#14077,#14078);+#14077 = CARTESIAN_POINT('',(0.20175791414,-5.980399655919E-02,1.8000001+ ));+#14078 = VECTOR('',#14079,1.);+#14079 = DIRECTION('',(-0.,-0.,-1.));+#14080 = PCURVE('',#13627,#14081);+#14081 = DEFINITIONAL_REPRESENTATION('',(#14082),#14086);+#14082 = LINE('',#14083,#14084);+#14083 = CARTESIAN_POINT('',(0.,0.));+#14084 = VECTOR('',#14085,1.);+#14085 = DIRECTION('',(0.,-1.));+#14086 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14087 = PCURVE('',#13597,#14088);+#14088 = DEFINITIONAL_REPRESENTATION('',(#14089),#14093);+#14089 = LINE('',#14090,#14091);+#14090 = CARTESIAN_POINT('',(1.,0.));+#14091 = VECTOR('',#14092,1.);+#14092 = DIRECTION('',(0.,-1.));+#14093 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14094 = ORIENTED_EDGE('',*,*,#13611,.T.);+#14095 = ORIENTED_EDGE('',*,*,#14047,.F.);+#14096 = ADVANCED_FACE('',(#14097),#13597,.T.);+#14097 = FACE_BOUND('',#14098,.T.);+#14098 = EDGE_LOOP('',(#14099,#14100,#14121,#14122));+#14099 = ORIENTED_EDGE('',*,*,#13832,.T.);+#14100 = ORIENTED_EDGE('',*,*,#14101,.T.);+#14101 = EDGE_CURVE('',#13835,#13554,#14102,.T.);+#14102 = SURFACE_CURVE('',#14103,(#14107,#14114),.PCURVE_S1.);+#14103 = LINE('',#14104,#14105);+#14104 = CARTESIAN_POINT('',(0.150763368571,-7.778100630334E-02,+ 1.8000001));+#14105 = VECTOR('',#14106,1.);+#14106 = DIRECTION('',(-0.,-0.,-1.));+#14107 = PCURVE('',#13597,#14108);+#14108 = DEFINITIONAL_REPRESENTATION('',(#14109),#14113);+#14109 = LINE('',#14110,#14111);+#14110 = CARTESIAN_POINT('',(0.,0.));+#14111 = VECTOR('',#14112,1.);+#14112 = DIRECTION('',(0.,-1.));+#14113 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14114 = PCURVE('',#13569,#14115);+#14115 = DEFINITIONAL_REPRESENTATION('',(#14116),#14120);+#14116 = LINE('',#14117,#14118);+#14117 = CARTESIAN_POINT('',(1.375133813098E-02,0.));+#14118 = VECTOR('',#14119,1.);+#14119 = DIRECTION('',(0.,-1.));+#14120 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14121 = ORIENTED_EDGE('',*,*,#13581,.T.);+#14122 = ORIENTED_EDGE('',*,*,#14074,.F.);+#14123 = ADVANCED_FACE('',(#14124),#13569,.T.);+#14124 = FACE_BOUND('',#14125,.T.);+#14125 = EDGE_LOOP('',(#14126,#14127,#14128,#14129));+#14126 = ORIENTED_EDGE('',*,*,#13863,.T.);+#14127 = ORIENTED_EDGE('',*,*,#13808,.T.);+#14128 = ORIENTED_EDGE('',*,*,#13551,.T.);+#14129 = ORIENTED_EDGE('',*,*,#14101,.F.);+#14130 = ADVANCED_FACE('',(#14131),#4521,.T.);+#14131 = FACE_BOUND('',#14132,.T.);+#14132 = EDGE_LOOP('',(#14133,#14134,#14135,#14136));+#14133 = ORIENTED_EDGE('',*,*,#4501,.T.);+#14134 = ORIENTED_EDGE('',*,*,#13388,.T.);+#14135 = ORIENTED_EDGE('',*,*,#13459,.T.);+#14136 = ORIENTED_EDGE('',*,*,#14137,.F.);+#14137 = EDGE_CURVE('',#4466,#13460,#14138,.T.);+#14138 = SURFACE_CURVE('',#14139,(#14143,#14150),.PCURVE_S1.);+#14139 = LINE('',#14140,#14141);+#14140 = CARTESIAN_POINT('',(0.223530866181,-7.556073816761E-02,+ 1.8000001));+#14141 = VECTOR('',#14142,1.);+#14142 = DIRECTION('',(-0.,-0.,-1.));+#14143 = PCURVE('',#4521,#14144);+#14144 = DEFINITIONAL_REPRESENTATION('',(#14145),#14149);+#14145 = LINE('',#14146,#14147);+#14146 = CARTESIAN_POINT('',(1.,0.));+#14147 = VECTOR('',#14148,1.);+#14148 = DIRECTION('',(0.,-1.));+#14149 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14150 = PCURVE('',#4485,#14151);+#14151 = DEFINITIONAL_REPRESENTATION('',(#14152),#14156);+#14152 = LINE('',#14153,#14154);+#14153 = CARTESIAN_POINT('',(0.,0.));+#14154 = VECTOR('',#14155,1.);+#14155 = DIRECTION('',(0.,-1.));+#14156 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14157 = ADVANCED_FACE('',(#14158),#4485,.T.);+#14158 = FACE_BOUND('',#14159,.T.);+#14159 = EDGE_LOOP('',(#14160,#14161,#14162,#14163));+#14160 = ORIENTED_EDGE('',*,*,#4465,.T.);+#14161 = ORIENTED_EDGE('',*,*,#14137,.T.);+#14162 = ORIENTED_EDGE('',*,*,#13482,.T.);+#14163 = ORIENTED_EDGE('',*,*,#14164,.F.);+#14164 = EDGE_CURVE('',#4439,#13483,#14165,.T.);+#14165 = SURFACE_CURVE('',#14166,(#14170,#14177),.PCURVE_S1.);+#14166 = LINE('',#14167,#14168);+#14167 = CARTESIAN_POINT('',(0.151336340994,-0.101559361821,1.8000001));+#14168 = VECTOR('',#14169,1.);+#14169 = DIRECTION('',(-0.,-0.,-1.));+#14170 = PCURVE('',#4485,#14171);+#14171 = DEFINITIONAL_REPRESENTATION('',(#14172),#14176);+#14172 = LINE('',#14173,#14174);+#14173 = CARTESIAN_POINT('',(1.,0.));+#14174 = VECTOR('',#14175,1.);+#14175 = DIRECTION('',(0.,-1.));+#14176 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14177 = PCURVE('',#4454,#14178);+#14178 = DEFINITIONAL_REPRESENTATION('',(#14179),#14183);+#14179 = LINE('',#14180,#14181);+#14180 = CARTESIAN_POINT('',(0.,0.));+#14181 = VECTOR('',#14182,1.);+#14182 = DIRECTION('',(0.,-1.));+#14183 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14184 = ADVANCED_FACE('',(#14185),#4454,.T.);+#14185 = FACE_BOUND('',#14186,.T.);+#14186 = EDGE_LOOP('',(#14187,#14188,#14189,#14190));+#14187 = ORIENTED_EDGE('',*,*,#4438,.T.);+#14188 = ORIENTED_EDGE('',*,*,#14164,.T.);+#14189 = ORIENTED_EDGE('',*,*,#13505,.T.);+#14190 = ORIENTED_EDGE('',*,*,#14191,.F.);+#14191 = EDGE_CURVE('',#4412,#13506,#14192,.T.);+#14192 = SURFACE_CURVE('',#14193,(#14197,#14204),.PCURVE_S1.);+#14193 = LINE('',#14194,#14195);+#14194 = CARTESIAN_POINT('',(0.107933680018,-0.101559361821,1.8000001));+#14195 = VECTOR('',#14196,1.);+#14196 = DIRECTION('',(-0.,-0.,-1.));+#14197 = PCURVE('',#4454,#14198);+#14198 = DEFINITIONAL_REPRESENTATION('',(#14199),#14203);+#14199 = LINE('',#14200,#14201);+#14200 = CARTESIAN_POINT('',(4.340266097589E-02,0.));+#14201 = VECTOR('',#14202,1.);+#14202 = DIRECTION('',(0.,-1.));+#14203 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14204 = PCURVE('',#4427,#14205);+#14205 = DEFINITIONAL_REPRESENTATION('',(#14206),#14210);+#14206 = LINE('',#14207,#14208);+#14207 = CARTESIAN_POINT('',(0.,0.));+#14208 = VECTOR('',#14209,1.);+#14209 = DIRECTION('',(0.,-1.));+#14210 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14211 = ADVANCED_FACE('',(#14212),#4427,.T.);+#14212 = FACE_BOUND('',#14213,.T.);+#14213 = EDGE_LOOP('',(#14214,#14215,#14216,#14217));+#14214 = ORIENTED_EDGE('',*,*,#4411,.T.);+#14215 = ORIENTED_EDGE('',*,*,#14191,.T.);+#14216 = ORIENTED_EDGE('',*,*,#13528,.T.);+#14217 = ORIENTED_EDGE('',*,*,#14218,.F.);+#14218 = EDGE_CURVE('',#4385,#13413,#14219,.T.);+#14219 = SURFACE_CURVE('',#14220,(#14224,#14231),.PCURVE_S1.);+#14220 = LINE('',#14221,#14222);+#14221 = CARTESIAN_POINT('',(0.107933680018,0.112302594736,1.8000001));+#14222 = VECTOR('',#14223,1.);+#14223 = DIRECTION('',(-0.,-0.,-1.));+#14224 = PCURVE('',#4427,#14225);+#14225 = DEFINITIONAL_REPRESENTATION('',(#14226),#14230);+#14226 = LINE('',#14227,#14228);+#14227 = CARTESIAN_POINT('',(0.213861956558,0.));+#14228 = VECTOR('',#14229,1.);+#14229 = DIRECTION('',(0.,-1.));+#14230 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14231 = PCURVE('',#4400,#14232);+#14232 = DEFINITIONAL_REPRESENTATION('',(#14233),#14237);+#14233 = LINE('',#14234,#14235);+#14234 = CARTESIAN_POINT('',(0.,0.));+#14235 = VECTOR('',#14236,1.);+#14236 = DIRECTION('',(0.,-1.));+#14237 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14238 = ADVANCED_FACE('',(#14239),#4400,.T.);+#14239 = FACE_BOUND('',#14240,.T.);+#14240 = EDGE_LOOP('',(#14241,#14242,#14243,#14244));+#14241 = ORIENTED_EDGE('',*,*,#4384,.T.);+#14242 = ORIENTED_EDGE('',*,*,#14218,.T.);+#14243 = ORIENTED_EDGE('',*,*,#13412,.T.);+#14244 = ORIENTED_EDGE('',*,*,#14245,.F.);+#14245 = EDGE_CURVE('',#4349,#13415,#14246,.T.);+#14246 = SURFACE_CURVE('',#14247,(#14251,#14258),.PCURVE_S1.);+#14247 = LINE('',#14248,#14249);+#14248 = CARTESIAN_POINT('',(0.151336340994,0.112302594736,1.8000001));+#14249 = VECTOR('',#14250,1.);+#14250 = DIRECTION('',(-0.,-0.,-1.));+#14251 = PCURVE('',#4400,#14252);+#14252 = DEFINITIONAL_REPRESENTATION('',(#14253),#14257);+#14253 = LINE('',#14254,#14255);+#14254 = CARTESIAN_POINT('',(4.340266097589E-02,0.));+#14255 = VECTOR('',#14256,1.);+#14256 = DIRECTION('',(0.,-1.));+#14257 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14258 = PCURVE('',#4368,#14259);+#14259 = DEFINITIONAL_REPRESENTATION('',(#14260),#14264);+#14260 = LINE('',#14261,#14262);+#14261 = CARTESIAN_POINT('',(0.,0.));+#14262 = VECTOR('',#14263,1.);+#14263 = DIRECTION('',(0.,-1.));+#14264 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14265 = ADVANCED_FACE('',(#14266),#4368,.T.);+#14266 = FACE_BOUND('',#14267,.T.);+#14267 = EDGE_LOOP('',(#14268,#14269,#14270,#14271));+#14268 = ORIENTED_EDGE('',*,*,#4346,.T.);+#14269 = ORIENTED_EDGE('',*,*,#14245,.T.);+#14270 = ORIENTED_EDGE('',*,*,#13437,.T.);+#14271 = ORIENTED_EDGE('',*,*,#13337,.F.);+#14272 = ADVANCED_FACE('',(#14273),#4333,.T.);+#14273 = FACE_BOUND('',#14274,.T.);+#14274 = EDGE_LOOP('',(#14275,#14276,#14299,#14327));+#14275 = ORIENTED_EDGE('',*,*,#4319,.T.);+#14276 = ORIENTED_EDGE('',*,*,#14277,.T.);+#14277 = EDGE_CURVE('',#4048,#14278,#14280,.T.);+#14278 = VERTEX_POINT('',#14279);+#14279 = CARTESIAN_POINT('',(0.34858209731,-7.720803388121E-02,1.7000001+ ));+#14280 = SURFACE_CURVE('',#14281,(#14285,#14292),.PCURVE_S1.);+#14281 = LINE('',#14282,#14283);+#14282 = CARTESIAN_POINT('',(0.34858209731,-7.720803388121E-02,1.8000001+ ));+#14283 = VECTOR('',#14284,1.);+#14284 = DIRECTION('',(-0.,-0.,-1.));+#14285 = PCURVE('',#4333,#14286);+#14286 = DEFINITIONAL_REPRESENTATION('',(#14287),#14291);+#14287 = LINE('',#14288,#14289);+#14288 = CARTESIAN_POINT('',(0.,0.));+#14289 = VECTOR('',#14290,1.);+#14290 = DIRECTION('',(0.,-1.));+#14291 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14292 = PCURVE('',#4065,#14293);+#14293 = DEFINITIONAL_REPRESENTATION('',(#14294),#14298);+#14294 = LINE('',#14295,#14296);+#14295 = CARTESIAN_POINT('',(4.497833513674E-02,0.));+#14296 = VECTOR('',#14297,1.);+#14297 = DIRECTION('',(0.,-1.));+#14298 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14299 = ORIENTED_EDGE('',*,*,#14300,.T.);+#14300 = EDGE_CURVE('',#14278,#14301,#14303,.T.);+#14301 = VERTEX_POINT('',#14302);+#14302 = CARTESIAN_POINT('',(0.34858209731,8.623234952967E-02,1.7000001)+ );+#14303 = SURFACE_CURVE('',#14304,(#14308,#14315),.PCURVE_S1.);+#14304 = LINE('',#14305,#14306);+#14305 = CARTESIAN_POINT('',(0.34858209731,-7.720803388121E-02,1.7000001+ ));+#14306 = VECTOR('',#14307,1.);+#14307 = DIRECTION('',(0.,1.,0.));+#14308 = PCURVE('',#4333,#14309);+#14309 = DEFINITIONAL_REPRESENTATION('',(#14310),#14314);+#14310 = LINE('',#14311,#14312);+#14311 = CARTESIAN_POINT('',(0.,-0.1));+#14312 = VECTOR('',#14313,1.);+#14313 = DIRECTION('',(1.,0.));+#14314 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14315 = PCURVE('',#14316,#14321);+#14316 = PLANE('',#14317);+#14317 = AXIS2_PLACEMENT_3D('',#14318,#14319,#14320);+#14318 = CARTESIAN_POINT('',(0.26492812368,-0.101559361821,1.7000001));+#14319 = DIRECTION('',(0.,0.,1.));+#14320 = DIRECTION('',(1.,0.,0.));+#14321 = DEFINITIONAL_REPRESENTATION('',(#14322),#14326);+#14322 = LINE('',#14323,#14324);+#14323 = CARTESIAN_POINT('',(8.365397363011E-02,2.435132794027E-02));+#14324 = VECTOR('',#14325,1.);+#14325 = DIRECTION('',(0.,1.));+#14326 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14327 = ORIENTED_EDGE('',*,*,#14328,.F.);+#14328 = EDGE_CURVE('',#4293,#14301,#14329,.T.);+#14329 = SURFACE_CURVE('',#14330,(#14334,#14341),.PCURVE_S1.);+#14330 = LINE('',#14331,#14332);+#14331 = CARTESIAN_POINT('',(0.34858209731,8.623234952967E-02,1.8000001)+ );+#14332 = VECTOR('',#14333,1.);+#14333 = DIRECTION('',(-0.,-0.,-1.));+#14334 = PCURVE('',#4333,#14335);+#14335 = DEFINITIONAL_REPRESENTATION('',(#14336),#14340);+#14336 = LINE('',#14337,#14338);+#14337 = CARTESIAN_POINT('',(0.163440383411,0.));+#14338 = VECTOR('',#14339,1.);+#14339 = DIRECTION('',(0.,-1.));+#14340 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14341 = PCURVE('',#4308,#14342);+#14342 = DEFINITIONAL_REPRESENTATION('',(#14343),#14347);+#14343 = LINE('',#14344,#14345);+#14344 = CARTESIAN_POINT('',(0.,0.));+#14345 = VECTOR('',#14346,1.);+#14346 = DIRECTION('',(0.,-1.));+#14347 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14348 = ADVANCED_FACE('',(#14349),#14316,.T.);+#14349 = FACE_BOUND('',#14350,.F.);+#14350 = EDGE_LOOP('',(#14351,#14376,#14397,#14398,#14421,#14444,#14467,+ #14490,#14513,#14536,#14559));+#14351 = ORIENTED_EDGE('',*,*,#14352,.T.);+#14352 = EDGE_CURVE('',#14353,#14355,#14357,.T.);+#14353 = VERTEX_POINT('',#14354);+#14354 = CARTESIAN_POINT('',(0.303603762173,-0.101559361821,1.7000001));+#14355 = VERTEX_POINT('',#14356);+#14356 = CARTESIAN_POINT('',(0.303603762173,-7.720803388121E-02,+ 1.7000001));+#14357 = SURFACE_CURVE('',#14358,(#14362,#14369),.PCURVE_S1.);+#14358 = LINE('',#14359,#14360);+#14359 = CARTESIAN_POINT('',(0.303603762173,-0.101559361821,1.7000001));+#14360 = VECTOR('',#14361,1.);+#14361 = DIRECTION('',(0.,1.,0.));+#14362 = PCURVE('',#14316,#14363);+#14363 = DEFINITIONAL_REPRESENTATION('',(#14364),#14368);+#14364 = LINE('',#14365,#14366);+#14365 = CARTESIAN_POINT('',(3.867563849337E-02,0.));+#14366 = VECTOR('',#14367,1.);+#14367 = DIRECTION('',(0.,1.));+#14368 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14369 = PCURVE('',#4092,#14370);+#14370 = DEFINITIONAL_REPRESENTATION('',(#14371),#14375);+#14371 = LINE('',#14372,#14373);+#14372 = CARTESIAN_POINT('',(0.,-0.1));+#14373 = VECTOR('',#14374,1.);+#14374 = DIRECTION('',(1.,0.));+#14375 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14376 = ORIENTED_EDGE('',*,*,#14377,.T.);+#14377 = EDGE_CURVE('',#14355,#14278,#14378,.T.);+#14378 = SURFACE_CURVE('',#14379,(#14383,#14390),.PCURVE_S1.);+#14379 = LINE('',#14380,#14381);+#14380 = CARTESIAN_POINT('',(0.303603762173,-7.720803388121E-02,+ 1.7000001));+#14381 = VECTOR('',#14382,1.);+#14382 = DIRECTION('',(1.,0.,0.));+#14383 = PCURVE('',#14316,#14384);+#14384 = DEFINITIONAL_REPRESENTATION('',(#14385),#14389);+#14385 = LINE('',#14386,#14387);+#14386 = CARTESIAN_POINT('',(3.867563849337E-02,2.435132794027E-02));+#14387 = VECTOR('',#14388,1.);+#14388 = DIRECTION('',(1.,0.));+#14389 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14390 = PCURVE('',#4065,#14391);+#14391 = DEFINITIONAL_REPRESENTATION('',(#14392),#14396);+#14392 = LINE('',#14393,#14394);+#14393 = CARTESIAN_POINT('',(0.,-0.1));+#14394 = VECTOR('',#14395,1.);+#14395 = DIRECTION('',(1.,0.));+#14396 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14397 = ORIENTED_EDGE('',*,*,#14300,.T.);+#14398 = ORIENTED_EDGE('',*,*,#14399,.T.);+#14399 = EDGE_CURVE('',#14301,#14400,#14402,.T.);+#14400 = VERTEX_POINT('',#14401);+#14401 = CARTESIAN_POINT('',(0.30016592764,7.534587350931E-02,1.7000001)+ );+#14402 = SURFACE_CURVE('',#14403,(#14407,#14414),.PCURVE_S1.);+#14403 = LINE('',#14404,#14405);+#14404 = CARTESIAN_POINT('',(0.34858209731,8.623234952967E-02,1.7000001)+ );+#14405 = VECTOR('',#14406,1.);+#14406 = DIRECTION('',(-0.97564065493,-0.219374821819,0.));+#14407 = PCURVE('',#14316,#14408);+#14408 = DEFINITIONAL_REPRESENTATION('',(#14409),#14413);+#14409 = LINE('',#14410,#14411);+#14410 = CARTESIAN_POINT('',(8.365397363011E-02,0.187791711351));+#14411 = VECTOR('',#14412,1.);+#14412 = DIRECTION('',(-0.97564065493,-0.219374821819));+#14413 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14414 = PCURVE('',#4308,#14415);+#14415 = DEFINITIONAL_REPRESENTATION('',(#14416),#14420);+#14416 = LINE('',#14417,#14418);+#14417 = CARTESIAN_POINT('',(-0.,-0.1));+#14418 = VECTOR('',#14419,1.);+#14419 = DIRECTION('',(1.,0.));+#14420 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14421 = ORIENTED_EDGE('',*,*,#14422,.T.);+#14422 = EDGE_CURVE('',#14400,#14423,#14425,.T.);+#14423 = VERTEX_POINT('',#14424);+#14424 = CARTESIAN_POINT('',(0.30016592764,0.101702604927,1.7000001));+#14425 = SURFACE_CURVE('',#14426,(#14430,#14437),.PCURVE_S1.);+#14426 = LINE('',#14427,#14428);+#14427 = CARTESIAN_POINT('',(0.30016592764,7.534587350931E-02,1.7000001)+ );+#14428 = VECTOR('',#14429,1.);+#14429 = DIRECTION('',(0.,1.,0.));+#14430 = PCURVE('',#14316,#14431);+#14431 = DEFINITIONAL_REPRESENTATION('',(#14432),#14436);+#14432 = LINE('',#14433,#14434);+#14433 = CARTESIAN_POINT('',(3.523780396063E-02,0.176905235331));+#14434 = VECTOR('',#14435,1.);+#14435 = DIRECTION('',(0.,1.));+#14436 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14437 = PCURVE('',#4281,#14438);+#14438 = DEFINITIONAL_REPRESENTATION('',(#14439),#14443);+#14439 = LINE('',#14440,#14441);+#14440 = CARTESIAN_POINT('',(0.,-0.1));+#14441 = VECTOR('',#14442,1.);+#14442 = DIRECTION('',(1.,0.));+#14443 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14444 = ORIENTED_EDGE('',*,*,#14445,.T.);+#14445 = EDGE_CURVE('',#14423,#14446,#14448,.T.);+#14446 = VERTEX_POINT('',#14447);+#14447 = CARTESIAN_POINT('',(0.348295611099,0.112302594736,1.7000001));+#14448 = SURFACE_CURVE('',#14449,(#14453,#14460),.PCURVE_S1.);+#14449 = LINE('',#14450,#14451);+#14450 = CARTESIAN_POINT('',(0.30016592764,0.101702604927,1.7000001));+#14451 = VECTOR('',#14452,1.);+#14452 = DIRECTION('',(0.976595648113,0.215083565358,0.));+#14453 = PCURVE('',#14316,#14454);+#14454 = DEFINITIONAL_REPRESENTATION('',(#14455),#14459);+#14455 = LINE('',#14456,#14457);+#14456 = CARTESIAN_POINT('',(3.523780396063E-02,0.203261966748));+#14457 = VECTOR('',#14458,1.);+#14458 = DIRECTION('',(0.976595648113,0.215083565358));+#14459 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14460 = PCURVE('',#4254,#14461);+#14461 = DEFINITIONAL_REPRESENTATION('',(#14462),#14466);+#14462 = LINE('',#14463,#14464);+#14463 = CARTESIAN_POINT('',(0.,-0.1));+#14464 = VECTOR('',#14465,1.);+#14465 = DIRECTION('',(1.,0.));+#14466 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14467 = ORIENTED_EDGE('',*,*,#14468,.T.);+#14468 = EDGE_CURVE('',#14446,#14469,#14471,.T.);+#14469 = VERTEX_POINT('',#14470);+#14470 = CARTESIAN_POINT('',(0.377230718416,0.112302594736,1.7000001));+#14471 = SURFACE_CURVE('',#14472,(#14476,#14483),.PCURVE_S1.);+#14472 = LINE('',#14473,#14474);+#14473 = CARTESIAN_POINT('',(0.348295611099,0.112302594736,1.7000001));+#14474 = VECTOR('',#14475,1.);+#14475 = DIRECTION('',(1.,0.,0.));+#14476 = PCURVE('',#14316,#14477);+#14477 = DEFINITIONAL_REPRESENTATION('',(#14478),#14482);+#14478 = LINE('',#14479,#14480);+#14479 = CARTESIAN_POINT('',(8.336748741905E-02,0.213861956558));+#14480 = VECTOR('',#14481,1.);+#14481 = DIRECTION('',(1.,0.));+#14482 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14483 = PCURVE('',#4227,#14484);+#14484 = DEFINITIONAL_REPRESENTATION('',(#14485),#14489);+#14485 = LINE('',#14486,#14487);+#14486 = CARTESIAN_POINT('',(0.,-0.1));+#14487 = VECTOR('',#14488,1.);+#14488 = DIRECTION('',(1.,0.));+#14489 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14490 = ORIENTED_EDGE('',*,*,#14491,.T.);+#14491 = EDGE_CURVE('',#14469,#14492,#14494,.T.);+#14492 = VERTEX_POINT('',#14493);+#14493 = CARTESIAN_POINT('',(0.377230718416,-7.720803388121E-02,+ 1.7000001));+#14494 = SURFACE_CURVE('',#14495,(#14499,#14506),.PCURVE_S1.);+#14495 = LINE('',#14496,#14497);+#14496 = CARTESIAN_POINT('',(0.377230718416,0.112302594736,1.7000001));+#14497 = VECTOR('',#14498,1.);+#14498 = DIRECTION('',(0.,-1.,0.));+#14499 = PCURVE('',#14316,#14500);+#14500 = DEFINITIONAL_REPRESENTATION('',(#14501),#14505);+#14501 = LINE('',#14502,#14503);+#14502 = CARTESIAN_POINT('',(0.112302594736,0.213861956558));+#14503 = VECTOR('',#14504,1.);+#14504 = DIRECTION('',(0.,-1.));+#14505 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14506 = PCURVE('',#4200,#14507);+#14507 = DEFINITIONAL_REPRESENTATION('',(#14508),#14512);+#14508 = LINE('',#14509,#14510);+#14509 = CARTESIAN_POINT('',(0.,-0.1));+#14510 = VECTOR('',#14511,1.);+#14511 = DIRECTION('',(1.,0.));+#14512 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14513 = ORIENTED_EDGE('',*,*,#14514,.T.);+#14514 = EDGE_CURVE('',#14492,#14515,#14517,.T.);+#14515 = VERTEX_POINT('',#14516);+#14516 = CARTESIAN_POINT('',(0.421636081131,-7.720803388121E-02,+ 1.7000001));+#14517 = SURFACE_CURVE('',#14518,(#14522,#14529),.PCURVE_S1.);+#14518 = LINE('',#14519,#14520);+#14519 = CARTESIAN_POINT('',(0.377230718416,-7.720803388121E-02,+ 1.7000001));+#14520 = VECTOR('',#14521,1.);+#14521 = DIRECTION('',(1.,0.,0.));+#14522 = PCURVE('',#14316,#14523);+#14523 = DEFINITIONAL_REPRESENTATION('',(#14524),#14528);+#14524 = LINE('',#14525,#14526);+#14525 = CARTESIAN_POINT('',(0.112302594736,2.435132794027E-02));+#14526 = VECTOR('',#14527,1.);+#14527 = DIRECTION('',(1.,0.));+#14528 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14529 = PCURVE('',#4173,#14530);+#14530 = DEFINITIONAL_REPRESENTATION('',(#14531),#14535);+#14531 = LINE('',#14532,#14533);+#14532 = CARTESIAN_POINT('',(0.,-0.1));+#14533 = VECTOR('',#14534,1.);+#14534 = DIRECTION('',(1.,0.));+#14535 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14536 = ORIENTED_EDGE('',*,*,#14537,.T.);+#14537 = EDGE_CURVE('',#14515,#14538,#14540,.T.);+#14538 = VERTEX_POINT('',#14539);+#14539 = CARTESIAN_POINT('',(0.421636081131,-0.101559361821,1.7000001));+#14540 = SURFACE_CURVE('',#14541,(#14545,#14552),.PCURVE_S1.);+#14541 = LINE('',#14542,#14543);+#14542 = CARTESIAN_POINT('',(0.421636081131,-7.720803388121E-02,+ 1.7000001));+#14543 = VECTOR('',#14544,1.);+#14544 = DIRECTION('',(0.,-1.,0.));+#14545 = PCURVE('',#14316,#14546);+#14546 = DEFINITIONAL_REPRESENTATION('',(#14547),#14551);+#14547 = LINE('',#14548,#14549);+#14548 = CARTESIAN_POINT('',(0.156707957451,2.435132794027E-02));+#14549 = VECTOR('',#14550,1.);+#14550 = DIRECTION('',(0.,-1.));+#14551 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14552 = PCURVE('',#4146,#14553);+#14553 = DEFINITIONAL_REPRESENTATION('',(#14554),#14558);+#14554 = LINE('',#14555,#14556);+#14555 = CARTESIAN_POINT('',(0.,-0.1));+#14556 = VECTOR('',#14557,1.);+#14557 = DIRECTION('',(1.,0.));+#14558 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14559 = ORIENTED_EDGE('',*,*,#14560,.T.);+#14560 = EDGE_CURVE('',#14538,#14353,#14561,.T.);+#14561 = SURFACE_CURVE('',#14562,(#14566,#14573),.PCURVE_S1.);+#14562 = LINE('',#14563,#14564);+#14563 = CARTESIAN_POINT('',(0.421636081131,-0.101559361821,1.7000001));+#14564 = VECTOR('',#14565,1.);+#14565 = DIRECTION('',(-1.,0.,0.));+#14566 = PCURVE('',#14316,#14567);+#14567 = DEFINITIONAL_REPRESENTATION('',(#14568),#14572);+#14568 = LINE('',#14569,#14570);+#14569 = CARTESIAN_POINT('',(0.156707957451,0.));+#14570 = VECTOR('',#14571,1.);+#14571 = DIRECTION('',(-1.,0.));+#14572 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14573 = PCURVE('',#4119,#14574);+#14574 = DEFINITIONAL_REPRESENTATION('',(#14575),#14579);+#14575 = LINE('',#14576,#14577);+#14576 = CARTESIAN_POINT('',(0.,-0.1));+#14577 = VECTOR('',#14578,1.);+#14578 = DIRECTION('',(1.,0.));+#14579 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14580 = ADVANCED_FACE('',(#14581),#4308,.T.);+#14581 = FACE_BOUND('',#14582,.T.);+#14582 = EDGE_LOOP('',(#14583,#14584,#14585,#14586));+#14583 = ORIENTED_EDGE('',*,*,#4292,.T.);+#14584 = ORIENTED_EDGE('',*,*,#14328,.T.);+#14585 = ORIENTED_EDGE('',*,*,#14399,.T.);+#14586 = ORIENTED_EDGE('',*,*,#14587,.F.);+#14587 = EDGE_CURVE('',#4266,#14400,#14588,.T.);+#14588 = SURFACE_CURVE('',#14589,(#14593,#14600),.PCURVE_S1.);+#14589 = LINE('',#14590,#14591);+#14590 = CARTESIAN_POINT('',(0.30016592764,7.534587350931E-02,1.8000001)+ );+#14591 = VECTOR('',#14592,1.);+#14592 = DIRECTION('',(-0.,-0.,-1.));+#14593 = PCURVE('',#4308,#14594);+#14594 = DEFINITIONAL_REPRESENTATION('',(#14595),#14599);+#14595 = LINE('',#14596,#14597);+#14596 = CARTESIAN_POINT('',(4.962500222273E-02,0.));+#14597 = VECTOR('',#14598,1.);+#14598 = DIRECTION('',(0.,-1.));+#14599 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14600 = PCURVE('',#4281,#14601);+#14601 = DEFINITIONAL_REPRESENTATION('',(#14602),#14606);+#14602 = LINE('',#14603,#14604);+#14603 = CARTESIAN_POINT('',(0.,0.));+#14604 = VECTOR('',#14605,1.);+#14605 = DIRECTION('',(0.,-1.));+#14606 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14607 = ADVANCED_FACE('',(#14608),#4281,.T.);+#14608 = FACE_BOUND('',#14609,.T.);+#14609 = EDGE_LOOP('',(#14610,#14611,#14612,#14613));+#14610 = ORIENTED_EDGE('',*,*,#4265,.T.);+#14611 = ORIENTED_EDGE('',*,*,#14587,.T.);+#14612 = ORIENTED_EDGE('',*,*,#14422,.T.);+#14613 = ORIENTED_EDGE('',*,*,#14614,.F.);+#14614 = EDGE_CURVE('',#4239,#14423,#14615,.T.);+#14615 = SURFACE_CURVE('',#14616,(#14620,#14627),.PCURVE_S1.);+#14616 = LINE('',#14617,#14618);+#14617 = CARTESIAN_POINT('',(0.30016592764,0.101702604927,1.8000001));+#14618 = VECTOR('',#14619,1.);+#14619 = DIRECTION('',(-0.,-0.,-1.));+#14620 = PCURVE('',#4281,#14621);+#14621 = DEFINITIONAL_REPRESENTATION('',(#14622),#14626);+#14622 = LINE('',#14623,#14624);+#14623 = CARTESIAN_POINT('',(2.635673141771E-02,0.));+#14624 = VECTOR('',#14625,1.);+#14625 = DIRECTION('',(0.,-1.));+#14626 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14627 = PCURVE('',#4254,#14628);+#14628 = DEFINITIONAL_REPRESENTATION('',(#14629),#14633);+#14629 = LINE('',#14630,#14631);+#14630 = CARTESIAN_POINT('',(0.,0.));+#14631 = VECTOR('',#14632,1.);+#14632 = DIRECTION('',(0.,-1.));+#14633 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14634 = ADVANCED_FACE('',(#14635),#4254,.T.);+#14635 = FACE_BOUND('',#14636,.T.);+#14636 = EDGE_LOOP('',(#14637,#14638,#14639,#14640));+#14637 = ORIENTED_EDGE('',*,*,#4238,.T.);+#14638 = ORIENTED_EDGE('',*,*,#14614,.T.);+#14639 = ORIENTED_EDGE('',*,*,#14445,.T.);+#14640 = ORIENTED_EDGE('',*,*,#14641,.F.);+#14641 = EDGE_CURVE('',#4212,#14446,#14642,.T.);+#14642 = SURFACE_CURVE('',#14643,(#14647,#14654),.PCURVE_S1.);+#14643 = LINE('',#14644,#14645);+#14644 = CARTESIAN_POINT('',(0.348295611099,0.112302594736,1.8000001));+#14645 = VECTOR('',#14646,1.);+#14646 = DIRECTION('',(-0.,-0.,-1.));+#14647 = PCURVE('',#4254,#14648);+#14648 = DEFINITIONAL_REPRESENTATION('',(#14649),#14653);+#14649 = LINE('',#14650,#14651);+#14650 = CARTESIAN_POINT('',(4.928312301148E-02,0.));+#14651 = VECTOR('',#14652,1.);+#14652 = DIRECTION('',(0.,-1.));+#14653 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14654 = PCURVE('',#4227,#14655);+#14655 = DEFINITIONAL_REPRESENTATION('',(#14656),#14660);+#14656 = LINE('',#14657,#14658);+#14657 = CARTESIAN_POINT('',(0.,0.));+#14658 = VECTOR('',#14659,1.);+#14659 = DIRECTION('',(0.,-1.));+#14660 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14661 = ADVANCED_FACE('',(#14662),#4227,.T.);+#14662 = FACE_BOUND('',#14663,.T.);+#14663 = EDGE_LOOP('',(#14664,#14665,#14666,#14667));+#14664 = ORIENTED_EDGE('',*,*,#4211,.T.);+#14665 = ORIENTED_EDGE('',*,*,#14641,.T.);+#14666 = ORIENTED_EDGE('',*,*,#14468,.T.);+#14667 = ORIENTED_EDGE('',*,*,#14668,.F.);+#14668 = EDGE_CURVE('',#4185,#14469,#14669,.T.);+#14669 = SURFACE_CURVE('',#14670,(#14674,#14681),.PCURVE_S1.);+#14670 = LINE('',#14671,#14672);+#14671 = CARTESIAN_POINT('',(0.377230718416,0.112302594736,1.8000001));+#14672 = VECTOR('',#14673,1.);+#14673 = DIRECTION('',(-0.,-0.,-1.));+#14674 = PCURVE('',#4227,#14675);+#14675 = DEFINITIONAL_REPRESENTATION('',(#14676),#14680);+#14676 = LINE('',#14677,#14678);+#14677 = CARTESIAN_POINT('',(2.893510731726E-02,0.));+#14678 = VECTOR('',#14679,1.);+#14679 = DIRECTION('',(0.,-1.));+#14680 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14681 = PCURVE('',#4200,#14682);+#14682 = DEFINITIONAL_REPRESENTATION('',(#14683),#14687);+#14683 = LINE('',#14684,#14685);+#14684 = CARTESIAN_POINT('',(0.,0.));+#14685 = VECTOR('',#14686,1.);+#14686 = DIRECTION('',(0.,-1.));+#14687 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14688 = ADVANCED_FACE('',(#14689),#4200,.T.);+#14689 = FACE_BOUND('',#14690,.T.);+#14690 = EDGE_LOOP('',(#14691,#14692,#14693,#14694));+#14691 = ORIENTED_EDGE('',*,*,#4184,.T.);+#14692 = ORIENTED_EDGE('',*,*,#14668,.T.);+#14693 = ORIENTED_EDGE('',*,*,#14491,.T.);+#14694 = ORIENTED_EDGE('',*,*,#14695,.F.);+#14695 = EDGE_CURVE('',#4158,#14492,#14696,.T.);+#14696 = SURFACE_CURVE('',#14697,(#14701,#14708),.PCURVE_S1.);+#14697 = LINE('',#14698,#14699);+#14698 = CARTESIAN_POINT('',(0.377230718416,-7.720803388121E-02,+ 1.8000001));+#14699 = VECTOR('',#14700,1.);+#14700 = DIRECTION('',(-0.,-0.,-1.));+#14701 = PCURVE('',#4200,#14702);+#14702 = DEFINITIONAL_REPRESENTATION('',(#14703),#14707);+#14703 = LINE('',#14704,#14705);+#14704 = CARTESIAN_POINT('',(0.189510628618,0.));+#14705 = VECTOR('',#14706,1.);+#14706 = DIRECTION('',(0.,-1.));+#14707 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14708 = PCURVE('',#4173,#14709);+#14709 = DEFINITIONAL_REPRESENTATION('',(#14710),#14714);+#14710 = LINE('',#14711,#14712);+#14711 = CARTESIAN_POINT('',(0.,0.));+#14712 = VECTOR('',#14713,1.);+#14713 = DIRECTION('',(0.,-1.));+#14714 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14715 = ADVANCED_FACE('',(#14716),#4173,.T.);+#14716 = FACE_BOUND('',#14717,.T.);+#14717 = EDGE_LOOP('',(#14718,#14719,#14720,#14721));+#14718 = ORIENTED_EDGE('',*,*,#4157,.T.);+#14719 = ORIENTED_EDGE('',*,*,#14695,.T.);+#14720 = ORIENTED_EDGE('',*,*,#14514,.T.);+#14721 = ORIENTED_EDGE('',*,*,#14722,.F.);+#14722 = EDGE_CURVE('',#4131,#14515,#14723,.T.);+#14723 = SURFACE_CURVE('',#14724,(#14728,#14735),.PCURVE_S1.);+#14724 = LINE('',#14725,#14726);+#14725 = CARTESIAN_POINT('',(0.421636081131,-7.720803388121E-02,+ 1.8000001));+#14726 = VECTOR('',#14727,1.);+#14727 = DIRECTION('',(-0.,-0.,-1.));+#14728 = PCURVE('',#4173,#14729);+#14729 = DEFINITIONAL_REPRESENTATION('',(#14730),#14734);+#14730 = LINE('',#14731,#14732);+#14731 = CARTESIAN_POINT('',(4.440536271461E-02,0.));+#14732 = VECTOR('',#14733,1.);+#14733 = DIRECTION('',(0.,-1.));+#14734 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14735 = PCURVE('',#4146,#14736);+#14736 = DEFINITIONAL_REPRESENTATION('',(#14737),#14741);+#14737 = LINE('',#14738,#14739);+#14738 = CARTESIAN_POINT('',(0.,0.));+#14739 = VECTOR('',#14740,1.);+#14740 = DIRECTION('',(0.,-1.));+#14741 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14742 = ADVANCED_FACE('',(#14743),#4146,.T.);+#14743 = FACE_BOUND('',#14744,.T.);+#14744 = EDGE_LOOP('',(#14745,#14746,#14747,#14748));+#14745 = ORIENTED_EDGE('',*,*,#4130,.T.);+#14746 = ORIENTED_EDGE('',*,*,#14722,.T.);+#14747 = ORIENTED_EDGE('',*,*,#14537,.T.);+#14748 = ORIENTED_EDGE('',*,*,#14749,.F.);+#14749 = EDGE_CURVE('',#4104,#14538,#14750,.T.);+#14750 = SURFACE_CURVE('',#14751,(#14755,#14762),.PCURVE_S1.);+#14751 = LINE('',#14752,#14753);+#14752 = CARTESIAN_POINT('',(0.421636081131,-0.101559361821,1.8000001));+#14753 = VECTOR('',#14754,1.);+#14754 = DIRECTION('',(-0.,-0.,-1.));+#14755 = PCURVE('',#4146,#14756);+#14756 = DEFINITIONAL_REPRESENTATION('',(#14757),#14761);+#14757 = LINE('',#14758,#14759);+#14758 = CARTESIAN_POINT('',(2.435132794027E-02,0.));+#14759 = VECTOR('',#14760,1.);+#14760 = DIRECTION('',(0.,-1.));+#14761 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14762 = PCURVE('',#4119,#14763);+#14763 = DEFINITIONAL_REPRESENTATION('',(#14764),#14768);+#14764 = LINE('',#14765,#14766);+#14765 = CARTESIAN_POINT('',(0.,0.));+#14766 = VECTOR('',#14767,1.);+#14767 = DIRECTION('',(0.,-1.));+#14768 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14769 = ADVANCED_FACE('',(#14770),#4119,.T.);+#14770 = FACE_BOUND('',#14771,.T.);+#14771 = EDGE_LOOP('',(#14772,#14773,#14774,#14775));+#14772 = ORIENTED_EDGE('',*,*,#4103,.T.);+#14773 = ORIENTED_EDGE('',*,*,#14749,.T.);+#14774 = ORIENTED_EDGE('',*,*,#14560,.T.);+#14775 = ORIENTED_EDGE('',*,*,#14776,.F.);+#14776 = EDGE_CURVE('',#4077,#14353,#14777,.T.);+#14777 = SURFACE_CURVE('',#14778,(#14782,#14789),.PCURVE_S1.);+#14778 = LINE('',#14779,#14780);+#14779 = CARTESIAN_POINT('',(0.303603762173,-0.101559361821,1.8000001));+#14780 = VECTOR('',#14781,1.);+#14781 = DIRECTION('',(-0.,-0.,-1.));+#14782 = PCURVE('',#4119,#14783);+#14783 = DEFINITIONAL_REPRESENTATION('',(#14784),#14788);+#14784 = LINE('',#14785,#14786);+#14785 = CARTESIAN_POINT('',(0.118032318958,0.));+#14786 = VECTOR('',#14787,1.);+#14787 = DIRECTION('',(0.,-1.));+#14788 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14789 = PCURVE('',#4092,#14790);+#14790 = DEFINITIONAL_REPRESENTATION('',(#14791),#14795);+#14791 = LINE('',#14792,#14793);+#14792 = CARTESIAN_POINT('',(0.,0.));+#14793 = VECTOR('',#14794,1.);+#14794 = DIRECTION('',(0.,-1.));+#14795 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14796 = ADVANCED_FACE('',(#14797),#4092,.T.);+#14797 = FACE_BOUND('',#14798,.T.);+#14798 = EDGE_LOOP('',(#14799,#14800,#14801,#14802));+#14799 = ORIENTED_EDGE('',*,*,#4076,.T.);+#14800 = ORIENTED_EDGE('',*,*,#14776,.T.);+#14801 = ORIENTED_EDGE('',*,*,#14352,.T.);+#14802 = ORIENTED_EDGE('',*,*,#14803,.F.);+#14803 = EDGE_CURVE('',#4050,#14355,#14804,.T.);+#14804 = SURFACE_CURVE('',#14805,(#14809,#14816),.PCURVE_S1.);+#14805 = LINE('',#14806,#14807);+#14806 = CARTESIAN_POINT('',(0.303603762173,-7.720803388121E-02,+ 1.8000001));+#14807 = VECTOR('',#14808,1.);+#14808 = DIRECTION('',(-0.,-0.,-1.));+#14809 = PCURVE('',#4092,#14810);+#14810 = DEFINITIONAL_REPRESENTATION('',(#14811),#14815);+#14811 = LINE('',#14812,#14813);+#14812 = CARTESIAN_POINT('',(2.435132794027E-02,0.));+#14813 = VECTOR('',#14814,1.);+#14814 = DIRECTION('',(0.,-1.));+#14815 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14816 = PCURVE('',#4065,#14817);+#14817 = DEFINITIONAL_REPRESENTATION('',(#14818),#14822);+#14818 = LINE('',#14819,#14820);+#14819 = CARTESIAN_POINT('',(0.,0.));+#14820 = VECTOR('',#14821,1.);+#14821 = DIRECTION('',(0.,-1.));+#14822 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14823 = ADVANCED_FACE('',(#14824),#4065,.T.);+#14824 = FACE_BOUND('',#14825,.T.);+#14825 = EDGE_LOOP('',(#14826,#14827,#14828,#14829));+#14826 = ORIENTED_EDGE('',*,*,#4047,.T.);+#14827 = ORIENTED_EDGE('',*,*,#14803,.T.);+#14828 = ORIENTED_EDGE('',*,*,#14377,.T.);+#14829 = ORIENTED_EDGE('',*,*,#14277,.F.);+#14830 = ADVANCED_FACE('',(#14831),#4029,.T.);+#14831 = FACE_BOUND('',#14832,.T.);+#14832 = EDGE_LOOP('',(#14833,#14834,#14857,#14885));+#14833 = ORIENTED_EDGE('',*,*,#4011,.T.);+#14834 = ORIENTED_EDGE('',*,*,#14835,.T.);+#14835 = EDGE_CURVE('',#3722,#14836,#14838,.T.);+#14836 = VERTEX_POINT('',#14837);+#14837 = CARTESIAN_POINT('',(0.599114288883,5.156751799116E-03,1.7000001+ ));+#14838 = SURFACE_CURVE('',#14839,(#14843,#14850),.PCURVE_S1.);+#14839 = LINE('',#14840,#14841);+#14840 = CARTESIAN_POINT('',(0.599114288883,5.156751799116E-03,1.8000001+ ));+#14841 = VECTOR('',#14842,1.);+#14842 = DIRECTION('',(-0.,-0.,-1.));+#14843 = PCURVE('',#4029,#14844);+#14844 = DEFINITIONAL_REPRESENTATION('',(#14845),#14849);+#14845 = LINE('',#14846,#14847);+#14846 = CARTESIAN_POINT('',(0.,0.));+#14847 = VECTOR('',#14848,1.);+#14848 = DIRECTION('',(0.,-1.));+#14849 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14850 = PCURVE('',#3743,#14851);+#14851 = DEFINITIONAL_REPRESENTATION('',(#14852),#14856);+#14852 = LINE('',#14853,#14854);+#14853 = CARTESIAN_POINT('',(1.,0.));+#14854 = VECTOR('',#14855,1.);+#14855 = DIRECTION('',(0.,-1.));+#14856 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14857 = ORIENTED_EDGE('',*,*,#14858,.T.);+#14858 = EDGE_CURVE('',#14836,#14859,#14861,.T.);+#14859 = VERTEX_POINT('',#14860);+#14860 = CARTESIAN_POINT('',(0.581567008456,-7.763776319781E-02,+ 1.7000001));+#14861 = SURFACE_CURVE('',#14862,(#14866,#14873),.PCURVE_S1.);+#14862 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#14863,#14864,#14865),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#14863 = CARTESIAN_POINT('',(0.599114288883,5.156751799116E-03,1.7000001+ ));+#14864 = CARTESIAN_POINT('',(0.599114288883,-4.956211451373E-02,+ 1.7000001));+#14865 = CARTESIAN_POINT('',(0.581567008456,-7.763776319781E-02,+ 1.7000001));+#14866 = PCURVE('',#4029,#14867);+#14867 = DEFINITIONAL_REPRESENTATION('',(#14868),#14872);+#14868 = LINE('',#14869,#14870);+#14869 = CARTESIAN_POINT('',(0.,-0.1));+#14870 = VECTOR('',#14871,1.);+#14871 = DIRECTION('',(1.,0.));+#14872 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14873 = PCURVE('',#14874,#14879);+#14874 = PLANE('',#14875);+#14875 = AXIS2_PLACEMENT_3D('',#14876,#14877,#14878);+#14876 = CARTESIAN_POINT('',(0.441546872799,-0.101559361821,1.7000001));+#14877 = DIRECTION('',(0.,0.,1.));+#14878 = DIRECTION('',(1.,0.,0.));+#14879 = DEFINITIONAL_REPRESENTATION('',(#14880),#14884);+#14880 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#14881,#14882,#14883),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#14881 = CARTESIAN_POINT('',(0.157567416084,0.106716113621));+#14882 = CARTESIAN_POINT('',(0.157567416084,5.199724730776E-02));+#14883 = CARTESIAN_POINT('',(0.140020135657,2.392159862368E-02));+#14884 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14885 = ORIENTED_EDGE('',*,*,#14886,.F.);+#14886 = EDGE_CURVE('',#3967,#14859,#14887,.T.);+#14887 = SURFACE_CURVE('',#14888,(#14892,#14899),.PCURVE_S1.);+#14888 = LINE('',#14889,#14890);+#14889 = CARTESIAN_POINT('',(0.581567008456,-7.763776319781E-02,+ 1.8000001));+#14890 = VECTOR('',#14891,1.);+#14891 = DIRECTION('',(-0.,-0.,-1.));+#14892 = PCURVE('',#4029,#14893);+#14893 = DEFINITIONAL_REPRESENTATION('',(#14894),#14898);+#14894 = LINE('',#14895,#14896);+#14895 = CARTESIAN_POINT('',(1.,0.));+#14896 = VECTOR('',#14897,1.);+#14897 = DIRECTION('',(0.,-1.));+#14898 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14899 = PCURVE('',#3992,#14900);+#14900 = DEFINITIONAL_REPRESENTATION('',(#14901),#14905);+#14901 = LINE('',#14902,#14903);+#14902 = CARTESIAN_POINT('',(0.,0.));+#14903 = VECTOR('',#14904,1.);+#14904 = DIRECTION('',(0.,-1.));+#14905 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14906 = ADVANCED_FACE('',(#14907,#15069),#14874,.T.);+#14907 = FACE_BOUND('',#14908,.F.);+#14908 = EDGE_LOOP('',(#14909,#14934,#14955,#14956,#14979,#15002,#15025,+ #15048));+#14909 = ORIENTED_EDGE('',*,*,#14910,.T.);+#14910 = EDGE_CURVE('',#14911,#14913,#14915,.T.);+#14911 = VERTEX_POINT('',#14912);+#14912 = CARTESIAN_POINT('',(0.529784625806,0.116170158586,1.7000001));+#14913 = VERTEX_POINT('',#14914);+#14914 = CARTESIAN_POINT('',(0.581567008456,8.809450990157E-02,1.7000001+ ));+#14915 = SURFACE_CURVE('',#14916,(#14920,#14927),.PCURVE_S1.);+#14916 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#14917,#14918,#14919),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#14917 = CARTESIAN_POINT('',(0.529784625806,0.116170158586,1.7000001));+#14918 = CARTESIAN_POINT('',(0.564019728028,0.116170158586,1.7000001));+#14919 = CARTESIAN_POINT('',(0.581567008456,8.809450990157E-02,1.7000001+ ));+#14920 = PCURVE('',#14874,#14921);+#14921 = DEFINITIONAL_REPRESENTATION('',(#14922),#14926);+#14922 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#14923,#14924,#14925),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#14923 = CARTESIAN_POINT('',(8.82377530071E-02,0.217729520407));+#14924 = CARTESIAN_POINT('',(0.122472855229,0.217729520407));+#14925 = CARTESIAN_POINT('',(0.140020135657,0.189653871723));+#14926 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14927 = PCURVE('',#3785,#14928);+#14928 = DEFINITIONAL_REPRESENTATION('',(#14929),#14933);+#14929 = LINE('',#14930,#14931);+#14930 = CARTESIAN_POINT('',(0.,-0.1));+#14931 = VECTOR('',#14932,1.);+#14932 = DIRECTION('',(1.,0.));+#14933 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14934 = ORIENTED_EDGE('',*,*,#14935,.T.);+#14935 = EDGE_CURVE('',#14913,#14836,#14936,.T.);+#14936 = SURFACE_CURVE('',#14937,(#14941,#14948),.PCURVE_S1.);+#14937 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#14938,#14939,#14940),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#14938 = CARTESIAN_POINT('',(0.581567008456,8.809450990157E-02,1.7000001+ ));+#14939 = CARTESIAN_POINT('',(0.599114288883,6.001886121749E-02,1.7000001+ ));+#14940 = CARTESIAN_POINT('',(0.599114288883,5.156751799116E-03,1.7000001+ ));+#14941 = PCURVE('',#14874,#14942);+#14942 = DEFINITIONAL_REPRESENTATION('',(#14943),#14947);+#14943 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#14944,#14945,#14946),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#14944 = CARTESIAN_POINT('',(0.140020135657,0.189653871723));+#14945 = CARTESIAN_POINT('',(0.157567416084,0.161578223039));+#14946 = CARTESIAN_POINT('',(0.157567416084,0.106716113621));+#14947 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14948 = PCURVE('',#3743,#14949);+#14949 = DEFINITIONAL_REPRESENTATION('',(#14950),#14954);+#14950 = LINE('',#14951,#14952);+#14951 = CARTESIAN_POINT('',(0.,-0.1));+#14952 = VECTOR('',#14953,1.);+#14953 = DIRECTION('',(1.,0.));+#14954 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14955 = ORIENTED_EDGE('',*,*,#14858,.T.);+#14956 = ORIENTED_EDGE('',*,*,#14957,.T.);+#14957 = EDGE_CURVE('',#14859,#14958,#14960,.T.);+#14958 = VERTEX_POINT('',#14959);+#14959 = CARTESIAN_POINT('',(0.529784625806,-0.105713411882,1.7000001));+#14960 = SURFACE_CURVE('',#14961,(#14965,#14972),.PCURVE_S1.);+#14961 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#14962,#14963,#14964),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#14962 = CARTESIAN_POINT('',(0.581567008456,-7.763776319781E-02,+ 1.7000001));+#14963 = CARTESIAN_POINT('',(0.564019728028,-0.105713411882,1.7000001));+#14964 = CARTESIAN_POINT('',(0.529784625806,-0.105713411882,1.7000001));+#14965 = PCURVE('',#14874,#14966);+#14966 = DEFINITIONAL_REPRESENTATION('',(#14967),#14971);+#14967 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#14968,#14969,#14970),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#14968 = CARTESIAN_POINT('',(0.140020135657,2.392159862368E-02));+#14969 = CARTESIAN_POINT('',(0.122472855229,-4.154050060399E-03));+#14970 = CARTESIAN_POINT('',(8.82377530071E-02,-4.154050060399E-03));+#14971 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14972 = PCURVE('',#3992,#14973);+#14973 = DEFINITIONAL_REPRESENTATION('',(#14974),#14978);+#14974 = LINE('',#14975,#14976);+#14975 = CARTESIAN_POINT('',(0.,-0.1));+#14976 = VECTOR('',#14977,1.);+#14977 = DIRECTION('',(1.,0.));+#14978 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14979 = ORIENTED_EDGE('',*,*,#14980,.T.);+#14980 = EDGE_CURVE('',#14958,#14981,#14983,.T.);+#14981 = VERTEX_POINT('',#14982);+#14982 = CARTESIAN_POINT('',(0.47807386471,-7.763776319781E-02,1.7000001+ ));+#14983 = SURFACE_CURVE('',#14984,(#14988,#14995),.PCURVE_S1.);+#14984 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#14985,#14986,#14987),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#14985 = CARTESIAN_POINT('',(0.529784625806,-0.105713411882,1.7000001));+#14986 = CARTESIAN_POINT('',(0.495549523585,-0.105713411882,1.7000001));+#14987 = CARTESIAN_POINT('',(0.47807386471,-7.763776319781E-02,1.7000001+ ));+#14988 = PCURVE('',#14874,#14989);+#14989 = DEFINITIONAL_REPRESENTATION('',(#14990),#14994);+#14990 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#14991,#14992,#14993),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#14991 = CARTESIAN_POINT('',(8.82377530071E-02,-4.154050060399E-03));+#14992 = CARTESIAN_POINT('',(5.400265078519E-02,-4.154050060399E-03));+#14993 = CARTESIAN_POINT('',(3.652699191041E-02,2.392159862368E-02));+#14994 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14995 = PCURVE('',#3947,#14996);+#14996 = DEFINITIONAL_REPRESENTATION('',(#14997),#15001);+#14997 = LINE('',#14998,#14999);+#14998 = CARTESIAN_POINT('',(0.,-0.1));+#14999 = VECTOR('',#15000,1.);+#15000 = DIRECTION('',(1.,0.));+#15001 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15002 = ORIENTED_EDGE('',*,*,#15003,.T.);+#15003 = EDGE_CURVE('',#14981,#15004,#15006,.T.);+#15004 = VERTEX_POINT('',#15005);+#15005 = CARTESIAN_POINT('',(0.460598205835,5.156751799116E-03,1.7000001+ ));+#15006 = SURFACE_CURVE('',#15007,(#15011,#15018),.PCURVE_S1.);+#15007 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#15008,#15009,#15010),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#15008 = CARTESIAN_POINT('',(0.47807386471,-7.763776319781E-02,1.7000001+ ));+#15009 = CARTESIAN_POINT('',(0.460598205835,-4.956211451373E-02,+ 1.7000001));+#15010 = CARTESIAN_POINT('',(0.460598205835,5.156751799116E-03,1.7000001+ ));+#15011 = PCURVE('',#14874,#15012);+#15012 = DEFINITIONAL_REPRESENTATION('',(#15013),#15017);+#15013 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#15014,#15015,#15016),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#15014 = CARTESIAN_POINT('',(3.652699191041E-02,2.392159862368E-02));+#15015 = CARTESIAN_POINT('',(1.905133303562E-02,5.199724730776E-02));+#15016 = CARTESIAN_POINT('',(1.905133303562E-02,0.106716113621));+#15017 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15018 = PCURVE('',#3905,#15019);+#15019 = DEFINITIONAL_REPRESENTATION('',(#15020),#15024);+#15020 = LINE('',#15021,#15022);+#15021 = CARTESIAN_POINT('',(0.,-0.1));+#15022 = VECTOR('',#15023,1.);+#15023 = DIRECTION('',(1.,0.));+#15024 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15025 = ORIENTED_EDGE('',*,*,#15026,.T.);+#15026 = EDGE_CURVE('',#15004,#15027,#15029,.T.);+#15027 = VERTEX_POINT('',#15028);+#15028 = CARTESIAN_POINT('',(0.47807386471,8.809450990157E-02,1.7000001)+ );+#15029 = SURFACE_CURVE('',#15030,(#15034,#15041),.PCURVE_S1.);+#15030 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#15031,#15032,#15033),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#15031 = CARTESIAN_POINT('',(0.460598205835,5.156751799116E-03,1.7000001+ ));+#15032 = CARTESIAN_POINT('',(0.460598205835,6.001886121749E-02,1.7000001+ ));+#15033 = CARTESIAN_POINT('',(0.47807386471,8.809450990157E-02,1.7000001)+ );+#15034 = PCURVE('',#14874,#15035);+#15035 = DEFINITIONAL_REPRESENTATION('',(#15036),#15040);+#15036 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#15037,#15038,#15039),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#15037 = CARTESIAN_POINT('',(1.905133303562E-02,0.106716113621));+#15038 = CARTESIAN_POINT('',(1.905133303562E-02,0.161578223039));+#15039 = CARTESIAN_POINT('',(3.652699191041E-02,0.189653871723));+#15040 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15041 = PCURVE('',#3869,#15042);+#15042 = DEFINITIONAL_REPRESENTATION('',(#15043),#15047);+#15043 = LINE('',#15044,#15045);+#15044 = CARTESIAN_POINT('',(0.,-0.1));+#15045 = VECTOR('',#15046,1.);+#15046 = DIRECTION('',(1.,0.));+#15047 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15048 = ORIENTED_EDGE('',*,*,#15049,.T.);+#15049 = EDGE_CURVE('',#15027,#14911,#15050,.T.);+#15050 = SURFACE_CURVE('',#15051,(#15055,#15062),.PCURVE_S1.);+#15051 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#15052,#15053,#15054),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#15052 = CARTESIAN_POINT('',(0.47807386471,8.809450990157E-02,1.7000001)+ );+#15053 = CARTESIAN_POINT('',(0.495549523585,0.116170158586,1.7000001));+#15054 = CARTESIAN_POINT('',(0.529784625806,0.116170158586,1.7000001));+#15055 = PCURVE('',#14874,#15056);+#15056 = DEFINITIONAL_REPRESENTATION('',(#15057),#15061);+#15057 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#15058,#15059,#15060),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#15058 = CARTESIAN_POINT('',(3.652699191041E-02,0.189653871723));+#15059 = CARTESIAN_POINT('',(5.400265078519E-02,0.217729520407));+#15060 = CARTESIAN_POINT('',(8.82377530071E-02,0.217729520407));+#15061 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15062 = PCURVE('',#3830,#15063);+#15063 = DEFINITIONAL_REPRESENTATION('',(#15064),#15068);+#15064 = LINE('',#15065,#15066);+#15065 = CARTESIAN_POINT('',(0.,-0.1));+#15066 = VECTOR('',#15067,1.);+#15067 = DIRECTION('',(1.,0.));+#15068 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15069 = FACE_BOUND('',#15070,.F.);+#15070 = EDGE_LOOP('',(#15071,#15103,#15133,#15163,#15193,#15223,#15253,+ #15283));+#15071 = ORIENTED_EDGE('',*,*,#15072,.T.);+#15072 = EDGE_CURVE('',#15073,#15075,#15077,.T.);+#15073 = VERTEX_POINT('',#15074);+#15074 = CARTESIAN_POINT('',(0.529784625806,9.325126170068E-02,1.7000001+ ));+#15075 = VERTEX_POINT('',#15076);+#15076 = CARTESIAN_POINT('',(0.499631952092,7.147830965997E-02,1.7000001+ ));+#15077 = SURFACE_CURVE('',#15078,(#15082,#15089),.PCURVE_S1.);+#15078 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#15079,#15080,#15081),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#15079 = CARTESIAN_POINT('',(0.529784625806,9.325126170068E-02,1.7000001+ ));+#15080 = CARTESIAN_POINT('',(0.509587347927,9.325126170068E-02,1.7000001+ ));+#15081 = CARTESIAN_POINT('',(0.499631952092,7.147830965997E-02,1.7000001+ ));+#15082 = PCURVE('',#14874,#15083);+#15083 = DEFINITIONAL_REPRESENTATION('',(#15084),#15088);+#15084 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#15085,#15086,#15087),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#15085 = CARTESIAN_POINT('',(8.82377530071E-02,0.194810623522));+#15086 = CARTESIAN_POINT('',(6.804047512723E-02,0.194810623522));+#15087 = CARTESIAN_POINT('',(5.808507929282E-02,0.173037671481));+#15088 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15089 = PCURVE('',#15090,#15097);+#15090 = SURFACE_OF_LINEAR_EXTRUSION('',#15091,#15095);+#15091 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#15092,#15093,#15094),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#15092 = CARTESIAN_POINT('',(0.529784625806,9.325126170068E-02,1.8000001+ ));+#15093 = CARTESIAN_POINT('',(0.509587347927,9.325126170068E-02,1.8000001+ ));+#15094 = CARTESIAN_POINT('',(0.499631952092,7.147830965997E-02,1.8000001+ ));+#15095 = VECTOR('',#15096,1.);+#15096 = DIRECTION('',(0.,0.,1.));+#15097 = DEFINITIONAL_REPRESENTATION('',(#15098),#15102);+#15098 = LINE('',#15099,#15100);+#15099 = CARTESIAN_POINT('',(0.,-0.1));+#15100 = VECTOR('',#15101,1.);+#15101 = DIRECTION('',(1.,0.));+#15102 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15103 = ORIENTED_EDGE('',*,*,#15104,.T.);+#15104 = EDGE_CURVE('',#15075,#15105,#15107,.T.);+#15105 = VERTEX_POINT('',#15106);+#15106 = CARTESIAN_POINT('',(0.489676556258,5.156751799116E-03,1.7000001+ ));+#15107 = SURFACE_CURVE('',#15108,(#15112,#15119),.PCURVE_S1.);+#15108 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#15109,#15110,#15111),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#15109 = CARTESIAN_POINT('',(0.499631952092,7.147830965997E-02,1.7000001+ ));+#15110 = CARTESIAN_POINT('',(0.489676556258,4.970535761926E-02,1.7000001+ ));+#15111 = CARTESIAN_POINT('',(0.489676556258,5.156751799116E-03,1.7000001+ ));+#15112 = PCURVE('',#14874,#15113);+#15113 = DEFINITIONAL_REPRESENTATION('',(#15114),#15118);+#15114 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#15115,#15116,#15117),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#15115 = CARTESIAN_POINT('',(5.808507929282E-02,0.173037671481));+#15116 = CARTESIAN_POINT('',(4.812968345842E-02,0.151264719441));+#15117 = CARTESIAN_POINT('',(4.812968345842E-02,0.106716113621));+#15118 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15119 = PCURVE('',#15120,#15127);+#15120 = SURFACE_OF_LINEAR_EXTRUSION('',#15121,#15125);+#15121 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#15122,#15123,#15124),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#15122 = CARTESIAN_POINT('',(0.499631952092,7.147830965997E-02,1.8000001+ ));+#15123 = CARTESIAN_POINT('',(0.489676556258,4.970535761926E-02,1.8000001+ ));+#15124 = CARTESIAN_POINT('',(0.489676556258,5.156751799116E-03,1.8000001+ ));+#15125 = VECTOR('',#15126,1.);+#15126 = DIRECTION('',(0.,0.,1.));+#15127 = DEFINITIONAL_REPRESENTATION('',(#15128),#15132);+#15128 = LINE('',#15129,#15130);+#15129 = CARTESIAN_POINT('',(0.,-0.1));+#15130 = VECTOR('',#15131,1.);+#15131 = DIRECTION('',(1.,0.));+#15132 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15133 = ORIENTED_EDGE('',*,*,#15134,.T.);+#15134 = EDGE_CURVE('',#15105,#15135,#15137,.T.);+#15135 = VERTEX_POINT('',#15136);+#15136 = CARTESIAN_POINT('',(0.499631952092,-6.102156295621E-02,+ 1.7000001));+#15137 = SURFACE_CURVE('',#15138,(#15142,#15149),.PCURVE_S1.);+#15138 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#15139,#15140,#15141),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#15139 = CARTESIAN_POINT('',(0.489676556258,5.156751799116E-03,1.7000001+ ));+#15140 = CARTESIAN_POINT('',(0.489676556258,-3.92486109155E-02,1.7000001+ ));+#15141 = CARTESIAN_POINT('',(0.499631952092,-6.102156295621E-02,+ 1.7000001));+#15142 = PCURVE('',#14874,#15143);+#15143 = DEFINITIONAL_REPRESENTATION('',(#15144),#15148);+#15144 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#15145,#15146,#15147),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#15145 = CARTESIAN_POINT('',(4.812968345842E-02,0.106716113621));+#15146 = CARTESIAN_POINT('',(4.812968345842E-02,6.231075090599E-02));+#15147 = CARTESIAN_POINT('',(5.808507929282E-02,4.053779886527E-02));+#15148 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15149 = PCURVE('',#15150,#15157);+#15150 = SURFACE_OF_LINEAR_EXTRUSION('',#15151,#15155);+#15151 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#15152,#15153,#15154),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#15152 = CARTESIAN_POINT('',(0.489676556258,5.156751799116E-03,1.8000001+ ));+#15153 = CARTESIAN_POINT('',(0.489676556258,-3.92486109155E-02,1.8000001+ ));+#15154 = CARTESIAN_POINT('',(0.499631952092,-6.102156295621E-02,+ 1.8000001));+#15155 = VECTOR('',#15156,1.);+#15156 = DIRECTION('',(0.,0.,1.));+#15157 = DEFINITIONAL_REPRESENTATION('',(#15158),#15162);+#15158 = LINE('',#15159,#15160);+#15159 = CARTESIAN_POINT('',(0.,-0.1));+#15160 = VECTOR('',#15161,1.);+#15161 = DIRECTION('',(1.,0.));+#15162 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15163 = ORIENTED_EDGE('',*,*,#15164,.T.);+#15164 = EDGE_CURVE('',#15135,#15165,#15167,.T.);+#15165 = VERTEX_POINT('',#15166);+#15166 = CARTESIAN_POINT('',(0.529784625806,-8.279451499692E-02,+ 1.7000001));+#15167 = SURFACE_CURVE('',#15168,(#15172,#15179),.PCURVE_S1.);+#15168 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#15169,#15170,#15171),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#15169 = CARTESIAN_POINT('',(0.499631952092,-6.102156295621E-02,+ 1.7000001));+#15170 = CARTESIAN_POINT('',(0.509587347927,-8.279451499692E-02,+ 1.7000001));+#15171 = CARTESIAN_POINT('',(0.529784625806,-8.279451499692E-02,+ 1.7000001));+#15172 = PCURVE('',#14874,#15173);+#15173 = DEFINITIONAL_REPRESENTATION('',(#15174),#15178);+#15174 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#15175,#15176,#15177),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#15175 = CARTESIAN_POINT('',(5.808507929282E-02,4.053779886527E-02));+#15176 = CARTESIAN_POINT('',(6.804047512723E-02,1.876484682456E-02));+#15177 = CARTESIAN_POINT('',(8.82377530071E-02,1.876484682456E-02));+#15178 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15179 = PCURVE('',#15180,#15187);+#15180 = SURFACE_OF_LINEAR_EXTRUSION('',#15181,#15185);+#15181 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#15182,#15183,#15184),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#15182 = CARTESIAN_POINT('',(0.499631952092,-6.102156295621E-02,+ 1.8000001));+#15183 = CARTESIAN_POINT('',(0.509587347927,-8.279451499692E-02,+ 1.8000001));+#15184 = CARTESIAN_POINT('',(0.529784625806,-8.279451499692E-02,+ 1.8000001));+#15185 = VECTOR('',#15186,1.);+#15186 = DIRECTION('',(0.,0.,1.));+#15187 = DEFINITIONAL_REPRESENTATION('',(#15188),#15192);+#15188 = LINE('',#15189,#15190);+#15189 = CARTESIAN_POINT('',(0.,-0.1));+#15190 = VECTOR('',#15191,1.);+#15191 = DIRECTION('',(1.,0.));+#15192 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15193 = ORIENTED_EDGE('',*,*,#15194,.T.);+#15194 = EDGE_CURVE('',#15165,#15195,#15197,.T.);+#15195 = VERTEX_POINT('',#15196);+#15196 = CARTESIAN_POINT('',(0.560080542626,-6.102156295621E-02,+ 1.7000001));+#15197 = SURFACE_CURVE('',#15198,(#15202,#15209),.PCURVE_S1.);+#15198 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#15199,#15200,#15201),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#15199 = CARTESIAN_POINT('',(0.529784625806,-8.279451499692E-02,+ 1.7000001));+#15200 = CARTESIAN_POINT('',(0.550125146792,-8.279451499692E-02,+ 1.7000001));+#15201 = CARTESIAN_POINT('',(0.560080542626,-6.102156295621E-02,+ 1.7000001));+#15202 = PCURVE('',#14874,#15203);+#15203 = DEFINITIONAL_REPRESENTATION('',(#15204),#15208);+#15204 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#15205,#15206,#15207),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#15205 = CARTESIAN_POINT('',(8.82377530071E-02,1.876484682456E-02));+#15206 = CARTESIAN_POINT('',(0.108578273993,1.876484682456E-02));+#15207 = CARTESIAN_POINT('',(0.118533669827,4.053779886527E-02));+#15208 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15209 = PCURVE('',#15210,#15217);+#15210 = SURFACE_OF_LINEAR_EXTRUSION('',#15211,#15215);+#15211 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#15212,#15213,#15214),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#15212 = CARTESIAN_POINT('',(0.529784625806,-8.279451499692E-02,+ 1.8000001));+#15213 = CARTESIAN_POINT('',(0.550125146792,-8.279451499692E-02,+ 1.8000001));+#15214 = CARTESIAN_POINT('',(0.560080542626,-6.102156295621E-02,+ 1.8000001));+#15215 = VECTOR('',#15216,1.);+#15216 = DIRECTION('',(0.,0.,1.));+#15217 = DEFINITIONAL_REPRESENTATION('',(#15218),#15222);+#15218 = LINE('',#15219,#15220);+#15219 = CARTESIAN_POINT('',(0.,-0.1));+#15220 = VECTOR('',#15221,1.);+#15221 = DIRECTION('',(1.,0.));+#15222 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15223 = ORIENTED_EDGE('',*,*,#15224,.T.);+#15224 = EDGE_CURVE('',#15195,#15225,#15227,.T.);+#15225 = VERTEX_POINT('',#15226);+#15226 = CARTESIAN_POINT('',(0.570035938461,5.156751799116E-03,1.7000001+ ));+#15227 = SURFACE_CURVE('',#15228,(#15232,#15239),.PCURVE_S1.);+#15228 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#15229,#15230,#15231),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#15229 = CARTESIAN_POINT('',(0.560080542626,-6.102156295621E-02,+ 1.7000001));+#15230 = CARTESIAN_POINT('',(0.570035938461,-3.92486109155E-02,1.7000001+ ));+#15231 = CARTESIAN_POINT('',(0.570035938461,5.156751799116E-03,1.7000001+ ));+#15232 = PCURVE('',#14874,#15233);+#15233 = DEFINITIONAL_REPRESENTATION('',(#15234),#15238);+#15234 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#15235,#15236,#15237),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#15235 = CARTESIAN_POINT('',(0.118533669827,4.053779886527E-02));+#15236 = CARTESIAN_POINT('',(0.128489065661,6.231075090599E-02));+#15237 = CARTESIAN_POINT('',(0.128489065661,0.106716113621));+#15238 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15239 = PCURVE('',#15240,#15247);+#15240 = SURFACE_OF_LINEAR_EXTRUSION('',#15241,#15245);+#15241 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#15242,#15243,#15244),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#15242 = CARTESIAN_POINT('',(0.560080542626,-6.102156295621E-02,+ 1.8000001));+#15243 = CARTESIAN_POINT('',(0.570035938461,-3.92486109155E-02,1.8000001+ ));+#15244 = CARTESIAN_POINT('',(0.570035938461,5.156751799116E-03,1.8000001+ ));+#15245 = VECTOR('',#15246,1.);+#15246 = DIRECTION('',(0.,0.,1.));+#15247 = DEFINITIONAL_REPRESENTATION('',(#15248),#15252);+#15248 = LINE('',#15249,#15250);+#15249 = CARTESIAN_POINT('',(0.,-0.1));+#15250 = VECTOR('',#15251,1.);+#15251 = DIRECTION('',(1.,0.));+#15252 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15253 = ORIENTED_EDGE('',*,*,#15254,.T.);+#15254 = EDGE_CURVE('',#15225,#15255,#15257,.T.);+#15255 = VERTEX_POINT('',#15256);+#15256 = CARTESIAN_POINT('',(0.560080542626,7.147830965997E-02,1.7000001+ ));+#15257 = SURFACE_CURVE('',#15258,(#15262,#15269),.PCURVE_S1.);+#15258 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#15259,#15260,#15261),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#15259 = CARTESIAN_POINT('',(0.570035938461,5.156751799116E-03,1.7000001+ ));+#15260 = CARTESIAN_POINT('',(0.570035938461,4.970535761926E-02,1.7000001+ ));+#15261 = CARTESIAN_POINT('',(0.560080542626,7.147830965997E-02,1.7000001+ ));+#15262 = PCURVE('',#14874,#15263);+#15263 = DEFINITIONAL_REPRESENTATION('',(#15264),#15268);+#15264 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#15265,#15266,#15267),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#15265 = CARTESIAN_POINT('',(0.128489065661,0.106716113621));+#15266 = CARTESIAN_POINT('',(0.128489065661,0.151264719441));+#15267 = CARTESIAN_POINT('',(0.118533669827,0.173037671481));+#15268 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15269 = PCURVE('',#15270,#15277);+#15270 = SURFACE_OF_LINEAR_EXTRUSION('',#15271,#15275);+#15271 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#15272,#15273,#15274),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#15272 = CARTESIAN_POINT('',(0.570035938461,5.156751799116E-03,1.8000001+ ));+#15273 = CARTESIAN_POINT('',(0.570035938461,4.970535761926E-02,1.8000001+ ));+#15274 = CARTESIAN_POINT('',(0.560080542626,7.147830965997E-02,1.8000001+ ));+#15275 = VECTOR('',#15276,1.);+#15276 = DIRECTION('',(0.,0.,1.));+#15277 = DEFINITIONAL_REPRESENTATION('',(#15278),#15282);+#15278 = LINE('',#15279,#15280);+#15279 = CARTESIAN_POINT('',(0.,-0.1));+#15280 = VECTOR('',#15281,1.);+#15281 = DIRECTION('',(1.,0.));+#15282 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15283 = ORIENTED_EDGE('',*,*,#15284,.T.);+#15284 = EDGE_CURVE('',#15255,#15073,#15285,.T.);+#15285 = SURFACE_CURVE('',#15286,(#15290,#15297),.PCURVE_S1.);+#15286 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#15287,#15288,#15289),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#15287 = CARTESIAN_POINT('',(0.560080542626,7.147830965997E-02,1.7000001+ ));+#15288 = CARTESIAN_POINT('',(0.550125146792,9.325126170068E-02,1.7000001+ ));+#15289 = CARTESIAN_POINT('',(0.529784625806,9.325126170068E-02,1.7000001+ ));+#15290 = PCURVE('',#14874,#15291);+#15291 = DEFINITIONAL_REPRESENTATION('',(#15292),#15296);+#15292 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#15293,#15294,#15295),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#15293 = CARTESIAN_POINT('',(0.118533669827,0.173037671481));+#15294 = CARTESIAN_POINT('',(0.108578273993,0.194810623522));+#15295 = CARTESIAN_POINT('',(8.82377530071E-02,0.194810623522));+#15296 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15297 = PCURVE('',#15298,#15305);+#15298 = SURFACE_OF_LINEAR_EXTRUSION('',#15299,#15303);+#15299 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#15300,#15301,#15302),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#15300 = CARTESIAN_POINT('',(0.560080542626,7.147830965997E-02,1.8000001+ ));+#15301 = CARTESIAN_POINT('',(0.550125146792,9.325126170068E-02,1.8000001+ ));+#15302 = CARTESIAN_POINT('',(0.529784625806,9.325126170068E-02,1.8000001+ ));+#15303 = VECTOR('',#15304,1.);+#15304 = DIRECTION('',(0.,0.,1.));+#15305 = DEFINITIONAL_REPRESENTATION('',(#15306),#15310);+#15306 = LINE('',#15307,#15308);+#15307 = CARTESIAN_POINT('',(0.,-0.1));+#15308 = VECTOR('',#15309,1.);+#15309 = DIRECTION('',(1.,0.));+#15310 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15311 = ADVANCED_FACE('',(#15312),#15298,.T.);+#15312 = FACE_BOUND('',#15313,.T.);+#15313 = EDGE_LOOP('',(#15314,#15359,#15380,#15381));+#15314 = ORIENTED_EDGE('',*,*,#15315,.T.);+#15315 = EDGE_CURVE('',#15316,#15318,#15320,.T.);+#15316 = VERTEX_POINT('',#15317);+#15317 = CARTESIAN_POINT('',(0.529784625806,9.325126170068E-02,1.75));+#15318 = VERTEX_POINT('',#15319);+#15319 = CARTESIAN_POINT('',(0.560080542626,7.147830965997E-02,1.75));+#15320 = SURFACE_CURVE('',#15321,(#15330,#15342),.PCURVE_S1.);+#15321 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#15322,#15323,#15324,#15325,+ #15326,#15327,#15328,#15329),.UNSPECIFIED.,.F.,.F.,(5,3,5),(0.,+ 0.364975228214,1.),.UNSPECIFIED.);+#15322 = CARTESIAN_POINT('',(0.529784625806,9.325126170068E-02,1.75));+#15323 = CARTESIAN_POINT('',(0.533496390917,9.325126170069E-02,1.75));+#15324 = CARTESIAN_POINT('',(0.536977991123,9.276791042447E-02,1.75));+#15325 = CARTESIAN_POINT('',(0.540229128569,9.180098455925E-02,1.75));+#15326 = CARTESIAN_POINT('',(0.548505085469,8.782694938627E-02,1.75));+#15327 = CARTESIAN_POINT('',(0.553062374267,8.383964605335E-02,1.75));+#15328 = CARTESIAN_POINT('',(0.556920695926,7.838905352152E-02,1.75));+#15329 = CARTESIAN_POINT('',(0.560080542626,7.147830965997E-02,1.75));+#15330 = PCURVE('',#15298,#15331);+#15331 = DEFINITIONAL_REPRESENTATION('',(#15332),#15341);+#15332 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#15333,#15334,#15335,#15336,+ #15337,#15338,#15339,#15340),.UNSPECIFIED.,.F.,.F.,(5,3,5),(0.,+ 0.364975228214,1.),.UNSPECIFIED.);+#15333 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#15334 = CARTESIAN_POINT('',(0.908759340217,-5.00001E-02));+#15335 = CARTESIAN_POINT('',(0.817509316486,-5.00001E-02));+#15336 = CARTESIAN_POINT('',(0.726254632263,-5.00001E-02));+#15337 = CARTESIAN_POINT('',(0.476224972141,-5.00001E-02));+#15338 = CARTESIAN_POINT('',(0.317450092103,-5.00001E-02));+#15339 = CARTESIAN_POINT('',(0.158700204011,-5.00001E-02));+#15340 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#15341 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15342 = PCURVE('',#15343,#15348);+#15343 = PLANE('',#15344);+#15344 = AXIS2_PLACEMENT_3D('',#15345,#15346,#15347);+#15345 = CARTESIAN_POINT('',(-1.680085640382,2.260171280765,1.75));+#15346 = DIRECTION('',(0.,0.,-1.));+#15347 = DIRECTION('',(0.596575959062,-0.802556617983,0.));+#15348 = DEFINITIONAL_REPRESENTATION('',(#15349),#15358);+#15349 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#15350,#15351,#15352,#15353,+ #15354,#15355,#15356,#15357),.UNSPECIFIED.,.F.,.F.,(5,3,5),(0.,+ 0.364975228214,1.),.UNSPECIFIED.);+#15350 = CARTESIAN_POINT('',(3.057431475395,-0.48081361843));+#15351 = CARTESIAN_POINT('',(3.059645825226,-0.483792520083));+#15352 = CARTESIAN_POINT('',(3.062110780973,-0.486298345619));+#15353 = CARTESIAN_POINT('',(3.064826344166,-0.488330722767));+#15354 = CARTESIAN_POINT('',(3.072952969319,-0.492601832902));+#15355 = CARTESIAN_POINT('',(3.078871774932,-0.493880585877));+#15356 = CARTESIAN_POINT('',(3.085547965984,-0.493725414992));+#15357 = CARTESIAN_POINT('',(3.092979317781,-0.492138587226));+#15358 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15359 = ORIENTED_EDGE('',*,*,#15360,.T.);+#15360 = EDGE_CURVE('',#15318,#15255,#15361,.T.);+#15361 = SURFACE_CURVE('',#15362,(#15366,#15373),.PCURVE_S1.);+#15362 = LINE('',#15363,#15364);+#15363 = CARTESIAN_POINT('',(0.560080542626,7.147830965997E-02,1.8000001+ ));+#15364 = VECTOR('',#15365,1.);+#15365 = DIRECTION('',(-0.,-0.,-1.));+#15366 = PCURVE('',#15298,#15367);+#15367 = DEFINITIONAL_REPRESENTATION('',(#15368),#15372);+#15368 = LINE('',#15369,#15370);+#15369 = CARTESIAN_POINT('',(0.,0.));+#15370 = VECTOR('',#15371,1.);+#15371 = DIRECTION('',(0.,-1.));+#15372 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15373 = PCURVE('',#15270,#15374);+#15374 = DEFINITIONAL_REPRESENTATION('',(#15375),#15379);+#15375 = LINE('',#15376,#15377);+#15376 = CARTESIAN_POINT('',(1.,0.));+#15377 = VECTOR('',#15378,1.);+#15378 = DIRECTION('',(0.,-1.));+#15379 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15380 = ORIENTED_EDGE('',*,*,#15284,.T.);+#15381 = ORIENTED_EDGE('',*,*,#15382,.F.);+#15382 = EDGE_CURVE('',#15316,#15073,#15383,.T.);+#15383 = SURFACE_CURVE('',#15384,(#15388,#15395),.PCURVE_S1.);+#15384 = LINE('',#15385,#15386);+#15385 = CARTESIAN_POINT('',(0.529784625806,9.325126170068E-02,1.8000001+ ));+#15386 = VECTOR('',#15387,1.);+#15387 = DIRECTION('',(-0.,-0.,-1.));+#15388 = PCURVE('',#15298,#15389);+#15389 = DEFINITIONAL_REPRESENTATION('',(#15390),#15394);+#15390 = LINE('',#15391,#15392);+#15391 = CARTESIAN_POINT('',(1.,0.));+#15392 = VECTOR('',#15393,1.);+#15393 = DIRECTION('',(0.,-1.));+#15394 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15395 = PCURVE('',#15090,#15396);+#15396 = DEFINITIONAL_REPRESENTATION('',(#15397),#15401);+#15397 = LINE('',#15398,#15399);+#15398 = CARTESIAN_POINT('',(0.,0.));+#15399 = VECTOR('',#15400,1.);+#15400 = DIRECTION('',(0.,-1.));+#15401 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15402 = ADVANCED_FACE('',(#15403,#15616),#15343,.F.);+#15403 = FACE_BOUND('',#15404,.F.);+#15404 = EDGE_LOOP('',(#15405,#15436,#15463,#15464,#15493,#15522,#15560,+ #15589));+#15405 = ORIENTED_EDGE('',*,*,#15406,.T.);+#15406 = EDGE_CURVE('',#15407,#15409,#15411,.T.);+#15407 = VERTEX_POINT('',#15408);+#15408 = CARTESIAN_POINT('',(0.489676556258,5.156751799116E-03,1.75));+#15409 = VERTEX_POINT('',#15410);+#15410 = CARTESIAN_POINT('',(0.499631952092,7.147830965997E-02,1.75));+#15411 = SURFACE_CURVE('',#15412,(#15418,#15427),.PCURVE_S1.);+#15412 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#15413,#15414,#15415,#15416,+ #15417),.UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),+ .PIECEWISE_BEZIER_KNOTS.);+#15413 = CARTESIAN_POINT('',(0.489676556258,5.156751799116E-03,1.75));+#15414 = CARTESIAN_POINT('',(0.489676556258,2.739527563952E-02,1.75));+#15415 = CARTESIAN_POINT('',(0.491330455516,4.587986617833E-02,1.75));+#15416 = CARTESIAN_POINT('',(0.494648272992,6.057875249076E-02,1.75));+#15417 = CARTESIAN_POINT('',(0.499631952092,7.147830965997E-02,1.75));+#15418 = PCURVE('',#15343,#15419);+#15419 = DEFINITIONAL_REPRESENTATION('',(#15420),#15426);+#15420 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#15421,#15422,#15423,#15424,+ #15425),.UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),+ .PIECEWISE_BEZIER_KNOTS.);+#15421 = CARTESIAN_POINT('',(3.104204797268,-0.396069555046));+#15422 = CARTESIAN_POINT('',(3.086357122785,-0.409336523734));+#15423 = CARTESIAN_POINT('',(3.072508868854,-0.421691333858));+#15424 = CARTESIAN_POINT('',(3.062691510509,-0.43312307243));+#15425 = CARTESIAN_POINT('',(3.056917141909,-0.443625170845));+#15426 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15427 = PCURVE('',#15120,#15428);+#15428 = DEFINITIONAL_REPRESENTATION('',(#15429),#15435);+#15429 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#15430,#15431,#15432,#15433,+ #15434),.UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),+ .PIECEWISE_BEZIER_KNOTS.);+#15430 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#15431 = CARTESIAN_POINT('',(0.750401573394,-5.00001E-02));+#15432 = CARTESIAN_POINT('',(0.500468597062,-5.00001E-02));+#15433 = CARTESIAN_POINT('',(0.250300399065,-5.00001E-02));+#15434 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#15435 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15436 = ORIENTED_EDGE('',*,*,#15437,.T.);+#15437 = EDGE_CURVE('',#15409,#15316,#15438,.T.);+#15438 = SURFACE_CURVE('',#15439,(#15445,#15454),.PCURVE_S1.);+#15439 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#15440,#15441,#15442,#15443,+ #15444),.UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),+ .PIECEWISE_BEZIER_KNOTS.);+#15440 = CARTESIAN_POINT('',(0.499631952092,7.147830965997E-02,1.75));+#15441 = CARTESIAN_POINT('',(0.504607870338,8.236089344866E-02,1.75));+#15442 = CARTESIAN_POINT('',(0.511292011335,8.962263623856E-02,1.75));+#15443 = CARTESIAN_POINT('',(0.519686267155,9.325126170068E-02,1.75));+#15444 = CARTESIAN_POINT('',(0.529784625806,9.325126170068E-02,1.75));+#15445 = PCURVE('',#15343,#15446);+#15446 = DEFINITIONAL_REPRESENTATION('',(#15447),#15453);+#15447 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#15448,#15449,#15450,#15451,+ #15452),.UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),+ .PIECEWISE_BEZIER_KNOTS.);+#15448 = CARTESIAN_POINT('',(3.056917141909,-0.443625170845));+#15449 = CARTESIAN_POINT('',(3.051151765468,-0.454110914824));+#15450 = CARTESIAN_POINT('',(3.04931140356,-0.463807497586));+#15451 = CARTESIAN_POINT('',(3.051407037398,-0.472709113863));+#15452 = CARTESIAN_POINT('',(3.057431475395,-0.48081361843));+#15453 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15454 = PCURVE('',#15090,#15455);+#15455 = DEFINITIONAL_REPRESENTATION('',(#15456),#15462);+#15456 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#15457,#15458,#15459,#15460,+ #15461),.UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),+ .PIECEWISE_BEZIER_KNOTS.);+#15457 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#15458 = CARTESIAN_POINT('',(0.750089382268,-5.00001E-02));+#15459 = CARTESIAN_POINT('',(0.500055029973,-5.00001E-02));+#15460 = CARTESIAN_POINT('',(0.249993061224,-5.00001E-02));+#15461 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#15462 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15463 = ORIENTED_EDGE('',*,*,#15315,.T.);+#15464 = ORIENTED_EDGE('',*,*,#15465,.T.);+#15465 = EDGE_CURVE('',#15318,#15466,#15468,.T.);+#15466 = VERTEX_POINT('',#15467);+#15467 = CARTESIAN_POINT('',(0.570035938461,5.156751799116E-03,1.75));+#15468 = SURFACE_CURVE('',#15469,(#15475,#15484),.PCURVE_S1.);+#15469 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#15470,#15471,#15472,#15473,+ #15474),.UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),+ .PIECEWISE_BEZIER_KNOTS.);+#15470 = CARTESIAN_POINT('',(0.560080542626,7.147830965997E-02,1.75));+#15471 = CARTESIAN_POINT('',(0.565064221728,6.057875248826E-02,1.75));+#15472 = CARTESIAN_POINT('',(0.568382039201,4.587986617716E-02,1.75));+#15473 = CARTESIAN_POINT('',(0.570035938461,2.73952756318E-02,1.75));+#15474 = CARTESIAN_POINT('',(0.570035938461,5.156751799116E-03,1.75));+#15475 = PCURVE('',#15343,#15476);+#15476 = DEFINITIONAL_REPRESENTATION('',(#15477),#15483);+#15477 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#15478,#15479,#15480,#15481,+ #15482),.UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),+ .PIECEWISE_BEZIER_KNOTS.);+#15478 = CARTESIAN_POINT('',(3.092979317781,-0.492138587226));+#15479 = CARTESIAN_POINT('',(3.104699972662,-0.489635858098));+#15480 = CARTESIAN_POINT('',(3.118475991289,-0.48352959227));+#15481 = CARTESIAN_POINT('',(3.134297598299,-0.473829477734));+#15482 = CARTESIAN_POINT('',(3.152145272775,-0.46056250905));+#15483 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15484 = PCURVE('',#15270,#15485);+#15485 = DEFINITIONAL_REPRESENTATION('',(#15486),#15492);+#15486 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#15487,#15488,#15489,#15490,+ #15491),.UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),+ .PIECEWISE_BEZIER_KNOTS.);+#15487 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#15488 = CARTESIAN_POINT('',(0.749699600878,-5.00001E-02));+#15489 = CARTESIAN_POINT('',(0.499531402962,-5.00001E-02));+#15490 = CARTESIAN_POINT('',(0.249598426519,-5.00001E-02));+#15491 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#15492 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15493 = ORIENTED_EDGE('',*,*,#15494,.T.);+#15494 = EDGE_CURVE('',#15466,#15495,#15497,.T.);+#15495 = VERTEX_POINT('',#15496);+#15496 = CARTESIAN_POINT('',(0.560080542626,-6.102156295621E-02,1.75));+#15497 = SURFACE_CURVE('',#15498,(#15504,#15513),.PCURVE_S1.);+#15498 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#15499,#15500,#15501,#15502,+ #15503),.UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),+ .PIECEWISE_BEZIER_KNOTS.);+#15499 = CARTESIAN_POINT('',(0.570035938461,5.156751799116E-03,1.75));+#15500 = CARTESIAN_POINT('',(0.570035938461,-1.701059286972E-02,1.75));+#15501 = CARTESIAN_POINT('',(0.568381990216,-3.54473146127E-02,1.75));+#15502 = CARTESIAN_POINT('',(0.565064169311,-5.012212042221E-02,1.75));+#15503 = CARTESIAN_POINT('',(0.560080542626,-6.102156295621E-02,1.75));+#15504 = PCURVE('',#15343,#15505);+#15505 = DEFINITIONAL_REPRESENTATION('',(#15506),#15512);+#15506 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#15507,#15508,#15509,#15510,+ #15511),.UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),+ .PIECEWISE_BEZIER_KNOTS.);+#15507 = CARTESIAN_POINT('',(3.152145272775,-0.46056250905));+#15508 = CARTESIAN_POINT('',(3.169935821942,-0.447338004144));+#15509 = CARTESIAN_POINT('',(3.183745629231,-0.435011712079));+#15510 = CARTESIAN_POINT('',(3.193543659562,-0.423594336605));+#15511 = CARTESIAN_POINT('',(3.199317967431,-0.413092348644));+#15512 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15513 = PCURVE('',#15240,#15514);+#15514 = DEFINITIONAL_REPRESENTATION('',(#15515),#15521);+#15515 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#15516,#15517,#15518,#15519,+ #15520),.UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),+ .PIECEWISE_BEZIER_KNOTS.);+#15516 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#15517 = CARTESIAN_POINT('',(0.750397887623,-5.00001E-02));+#15518 = CARTESIAN_POINT('',(0.500464372979,-5.00001E-02));+#15519 = CARTESIAN_POINT('',(0.25029776655,-5.00001E-02));+#15520 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#15521 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15522 = ORIENTED_EDGE('',*,*,#15523,.T.);+#15523 = EDGE_CURVE('',#15495,#15524,#15526,.T.);+#15524 = VERTEX_POINT('',#15525);+#15525 = CARTESIAN_POINT('',(0.529784625806,-8.279451499692E-02,1.75));+#15526 = SURFACE_CURVE('',#15527,(#15536,#15548),.PCURVE_S1.);+#15527 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#15528,#15529,#15530,#15531,+ #15532,#15533,#15534,#15535),.UNSPECIFIED.,.F.,.F.,(5,3,5),(0.,+ 0.63802441578,1.),.UNSPECIFIED.);+#15528 = CARTESIAN_POINT('',(0.560080542626,-6.102156295621E-02,1.75));+#15529 = CARTESIAN_POINT('',(0.55690576987,-6.796495085478E-02,1.75));+#15530 = CARTESIAN_POINT('',(0.553025907848,-7.343436031796E-02,1.75));+#15531 = CARTESIAN_POINT('',(0.548440457368,-7.742660877637E-02,1.75));+#15532 = CARTESIAN_POINT('',(0.540148920904,-8.136798065985E-02,1.75));+#15533 = CARTESIAN_POINT('',(0.536920746698,-8.23190761679E-02,1.75));+#15534 = CARTESIAN_POINT('',(0.533465884806,-8.279451499692E-02,1.75));+#15535 = CARTESIAN_POINT('',(0.529784625806,-8.279451499692E-02,1.75));+#15536 = PCURVE('',#15343,#15537);+#15537 = DEFINITIONAL_REPRESENTATION('',(#15538),#15547);+#15538 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#15539,#15540,#15541,#15542,+ #15543,#15544,#15545,#15546),.UNSPECIFIED.,.F.,.F.,(5,3,5),(0.,+ 0.63802441578,1.),.UNSPECIFIED.);+#15539 = CARTESIAN_POINT('',(3.199317967431,-0.413092348644));+#15540 = CARTESIAN_POINT('',(3.202996436238,-0.406402155463));+#15541 = CARTESIAN_POINT('',(3.205071314593,-0.400025428325));+#15542 = CARTESIAN_POINT('',(3.205539750496,-0.393963665243));+#15543 = CARTESIAN_POINT('',(3.203756393267,-0.384957910069));+#15544 = CARTESIAN_POINT('',(3.202593850138,-0.381799716781));+#15545 = CARTESIAN_POINT('',(3.20091432917,-0.37874335913));+#15546 = CARTESIAN_POINT('',(3.198718178552,-0.375788940357));+#15547 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15548 = PCURVE('',#15210,#15549);+#15549 = DEFINITIONAL_REPRESENTATION('',(#15550),#15559);+#15550 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#15551,#15552,#15553,#15554,+ #15555,#15556,#15557,#15558),.UNSPECIFIED.,.F.,.F.,(5,3,5),(0.,+ 0.63802441578,1.),.UNSPECIFIED.);+#15551 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#15552 = CARTESIAN_POINT('',(0.840550149433,-5.00001E-02));+#15553 = CARTESIAN_POINT('',(0.681050144277,-5.00001E-02));+#15554 = CARTESIAN_POINT('',(0.521525028365,-5.00001E-02));+#15555 = CARTESIAN_POINT('',(0.2714953674,-5.00001E-02));+#15556 = CARTESIAN_POINT('',(0.180990759935,-5.00001E-02));+#15557 = CARTESIAN_POINT('',(9.049077459357E-02,-5.00001E-02));+#15558 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#15559 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15560 = ORIENTED_EDGE('',*,*,#15561,.T.);+#15561 = EDGE_CURVE('',#15524,#15562,#15564,.T.);+#15562 = VERTEX_POINT('',#15563);+#15563 = CARTESIAN_POINT('',(0.499631952092,-6.102156295621E-02,1.75));+#15564 = SURFACE_CURVE('',#15565,(#15571,#15580),.PCURVE_S1.);+#15565 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#15566,#15567,#15568,#15569,+ #15570),.UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),+ .PIECEWISE_BEZIER_KNOTS.);+#15566 = CARTESIAN_POINT('',(0.529784625806,-8.279451499692E-02,1.75));+#15567 = CARTESIAN_POINT('',(0.519686267155,-8.279451499692E-02,1.75));+#15568 = CARTESIAN_POINT('',(0.511292011335,-7.916588953387E-02,1.75));+#15569 = CARTESIAN_POINT('',(0.504607870338,-7.190414674483E-02,1.75));+#15570 = CARTESIAN_POINT('',(0.499631952092,-6.102156295621E-02,1.75));+#15571 = PCURVE('',#15343,#15572);+#15572 = DEFINITIONAL_REPRESENTATION('',(#15573),#15579);+#15573 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#15574,#15575,#15576,#15577,+ #15578),.UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),+ .PIECEWISE_BEZIER_KNOTS.);+#15574 = CARTESIAN_POINT('',(3.198718178552,-0.375788940357));+#15575 = CARTESIAN_POINT('',(3.192693740554,-0.367684435791));+#15576 = CARTESIAN_POINT('',(3.184773751958,-0.363112320945));+#15577 = CARTESIAN_POINT('',(3.174958194399,-0.362080100521));+#15578 = CARTESIAN_POINT('',(3.163255791559,-0.364578932263));+#15579 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15580 = PCURVE('',#15180,#15581);+#15581 = DEFINITIONAL_REPRESENTATION('',(#15582),#15588);+#15582 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#15583,#15584,#15585,#15586,+ #15587),.UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),+ .PIECEWISE_BEZIER_KNOTS.);+#15583 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#15584 = CARTESIAN_POINT('',(0.750006938762,-5.00001E-02));+#15585 = CARTESIAN_POINT('',(0.499944970019,-5.00001E-02));+#15586 = CARTESIAN_POINT('',(0.24991061773,-5.00001E-02));+#15587 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#15588 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15589 = ORIENTED_EDGE('',*,*,#15590,.T.);+#15590 = EDGE_CURVE('',#15562,#15407,#15591,.T.);+#15591 = SURFACE_CURVE('',#15592,(#15598,#15607),.PCURVE_S1.);+#15592 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#15593,#15594,#15595,#15596,+ #15597),.UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),+ .PIECEWISE_BEZIER_KNOTS.);+#15593 = CARTESIAN_POINT('',(0.499631952092,-6.102156295621E-02,1.75));+#15594 = CARTESIAN_POINT('',(0.494648325406,-5.01221204194E-02,1.75));+#15595 = CARTESIAN_POINT('',(0.491330504502,-3.544731461811E-02,1.75));+#15596 = CARTESIAN_POINT('',(0.489676556258,-1.701059285992E-02,1.75));+#15597 = CARTESIAN_POINT('',(0.489676556258,5.156751799116E-03,1.75));+#15598 = PCURVE('',#15343,#15599);+#15599 = DEFINITIONAL_REPRESENTATION('',(#15600),#15606);+#15600 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#15601,#15602,#15603,#15604,+ #15605),.UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),+ .PIECEWISE_BEZIER_KNOTS.);+#15601 = CARTESIAN_POINT('',(3.163255791559,-0.364578932263));+#15602 = CARTESIAN_POINT('',(3.151535259949,-0.367081635069));+#15603 = CARTESIAN_POINT('',(3.137778565248,-0.373173532291));+#15604 = CARTESIAN_POINT('',(3.121995346427,-0.382845050146));+#15605 = CARTESIAN_POINT('',(3.104204797268,-0.396069555046));+#15606 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15607 = PCURVE('',#15150,#15608);+#15608 = DEFINITIONAL_REPRESENTATION('',(#15609),#15615);+#15609 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#15610,#15611,#15612,#15613,+ #15614),.UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),+ .PIECEWISE_BEZIER_KNOTS.);+#15610 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#15611 = CARTESIAN_POINT('',(0.749702233385,-5.00001E-02));+#15612 = CARTESIAN_POINT('',(0.499535627082,-5.00001E-02));+#15613 = CARTESIAN_POINT('',(0.249602112266,-5.00001E-02));+#15614 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#15615 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15616 = FACE_BOUND('',#15617,.F.);+#15617 = EDGE_LOOP('',(#15618,#15656,#15692,#15728,#15764,#15800,#15836,+ #15872));+#15618 = ORIENTED_EDGE('',*,*,#15619,.T.);+#15619 = EDGE_CURVE('',#15620,#15622,#15624,.T.);+#15620 = VERTEX_POINT('',#15621);+#15621 = CARTESIAN_POINT('',(0.529498139595,2.521078657346E-02,1.75));+#15622 = VERTEX_POINT('',#15623);+#15623 = CARTESIAN_POINT('',(0.516248152334,1.948106235222E-02,1.75));+#15624 = SURFACE_CURVE('',#15625,(#15631,#15640),.PCURVE_S1.);+#15625 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#15626,#15627,#15628,#15629,+ #15630),.UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),+ .PIECEWISE_BEZIER_KNOTS.);+#15626 = CARTESIAN_POINT('',(0.529498139595,2.521078657346E-02,1.75));+#15627 = CARTESIAN_POINT('',(0.525630611224,2.521078657346E-02,1.75));+#15628 = CARTESIAN_POINT('',(0.522133032209,2.425585005621E-02,1.75));+#15629 = CARTESIAN_POINT('',(0.519005538013,2.234587864228E-02,1.75));+#15630 = CARTESIAN_POINT('',(0.516248152334,1.948106235222E-02,1.75));+#15631 = PCURVE('',#15343,#15632);+#15632 = DEFINITIONAL_REPRESENTATION('',(#15633),#15639);+#15633 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#15634,#15635,#15636,#15637,+ #15638),.UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),+ .PIECEWISE_BEZIER_KNOTS.);+#15634 = CARTESIAN_POINT('',(3.111866898213,-0.439992385321));+#15635 = CARTESIAN_POINT('',(3.109559623766,-0.436888474832));+#15636 = CARTESIAN_POINT('',(3.108239442833,-0.433511777478));+#15637 = CARTESIAN_POINT('',(3.107906515181,-0.429862343284));+#15638 = CARTESIAN_POINT('',(3.108560702448,-0.425940304633));+#15639 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15640 = PCURVE('',#15641,#15648);+#15641 = SURFACE_OF_LINEAR_EXTRUSION('',#15642,#15646);+#15642 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#15643,#15644,#15645),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#15643 = CARTESIAN_POINT('',(0.516248152334,1.948106235222E-02,1.8000001+ ));+#15644 = CARTESIAN_POINT('',(0.521763011897,2.521078657346E-02,1.8000001+ ));+#15645 = CARTESIAN_POINT('',(0.529498139595,2.521078657346E-02,1.8000001+ ));+#15646 = VECTOR('',#15647,1.);+#15647 = DIRECTION('',(0.,0.,1.));+#15648 = DEFINITIONAL_REPRESENTATION('',(#15649),#15655);+#15649 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#15650,#15651,#15652,#15653,+ #15654),.UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),+ .PIECEWISE_BEZIER_KNOTS.);+#15650 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#15651 = CARTESIAN_POINT('',(0.750002293323,-5.00001E-02));+#15652 = CARTESIAN_POINT('',(0.499998863132,-5.00001E-02));+#15653 = CARTESIAN_POINT('',(0.249996001504,-5.00001E-02));+#15654 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#15655 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15656 = ORIENTED_EDGE('',*,*,#15657,.T.);+#15657 = EDGE_CURVE('',#15622,#15658,#15660,.T.);+#15658 = VERTEX_POINT('',#15659);+#15659 = CARTESIAN_POINT('',(0.510733292771,5.872967326771E-03,1.75));+#15660 = SURFACE_CURVE('',#15661,(#15667,#15676),.PCURVE_S1.);+#15661 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#15662,#15663,#15664,#15665,+ #15666),.UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),+ .PIECEWISE_BEZIER_KNOTS.);+#15662 = CARTESIAN_POINT('',(0.516248152334,1.948106235222E-02,1.75));+#15663 = CARTESIAN_POINT('',(0.513490757981,1.66162370506E-02,1.75));+#15664 = CARTESIAN_POINT('',(0.51165241673,1.339324405589E-02,1.75));+#15665 = CARTESIAN_POINT('',(0.510733292771,9.81211136824E-03,1.75));+#15666 = CARTESIAN_POINT('',(0.510733292771,5.872967326771E-03,1.75));+#15667 = PCURVE('',#15343,#15668);+#15668 = DEFINITIONAL_REPRESENTATION('',(#15669),#15675);+#15669 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#15670,#15671,#15672,#15673,+ #15674),.UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),+ .PIECEWISE_BEZIER_KNOTS.);+#15670 = CARTESIAN_POINT('',(3.108560702448,-0.425940304633));+#15671 = CARTESIAN_POINT('',(3.109214891773,-0.422018253645));+#15672 = CARTESIAN_POINT('',(3.110704815935,-0.418620120571));+#15673 = CARTESIAN_POINT('',(3.113030550416,-0.415746053888));+#15674 = CARTESIAN_POINT('',(3.116191936536,-0.413396055253));+#15675 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15676 = PCURVE('',#15677,#15684);+#15677 = SURFACE_OF_LINEAR_EXTRUSION('',#15678,#15682);+#15678 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#15679,#15680,#15681),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#15679 = CARTESIAN_POINT('',(0.510733292771,5.872967326771E-03,1.8000001+ ));+#15680 = CARTESIAN_POINT('',(0.510733292771,1.375133813098E-02,1.8000001+ ));+#15681 = CARTESIAN_POINT('',(0.516248152334,1.948106235222E-02,1.8000001+ ));+#15682 = VECTOR('',#15683,1.);+#15683 = DIRECTION('',(0.,0.,1.));+#15684 = DEFINITIONAL_REPRESENTATION('',(#15685),#15691);+#15685 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#15686,#15687,#15688,#15689,+ #15690),.UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),+ .PIECEWISE_BEZIER_KNOTS.);+#15686 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#15687 = CARTESIAN_POINT('',(0.75000321211,-5.00001E-02));+#15688 = CARTESIAN_POINT('',(0.5000003915,-5.00001E-02));+#15689 = CARTESIAN_POINT('',(0.249997375052,-5.00001E-02));+#15690 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#15691 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15692 = ORIENTED_EDGE('',*,*,#15693,.T.);+#15693 = EDGE_CURVE('',#15658,#15694,#15696,.T.);+#15694 = VERTEX_POINT('',#15695);+#15695 = CARTESIAN_POINT('',(0.516104909228,-7.878370804205E-03,1.75));+#15696 = SURFACE_CURVE('',#15697,(#15703,#15712),.PCURVE_S1.);+#15697 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#15698,#15699,#15700,#15701,+ #15702),.UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),+ .PIECEWISE_BEZIER_KNOTS.);+#15698 = CARTESIAN_POINT('',(0.510733292771,5.872967326771E-03,1.75));+#15699 = CARTESIAN_POINT('',(0.510733292771,1.719012349948E-03,1.75));+#15700 = CARTESIAN_POINT('',(0.511628521194,-1.957619259291E-03,1.75));+#15701 = CARTESIAN_POINT('',(0.513419105867,-5.156756731711E-03,1.75));+#15702 = CARTESIAN_POINT('',(0.516104909228,-7.878370804206E-03,1.75));+#15703 = PCURVE('',#15343,#15704);+#15704 = DEFINITIONAL_REPRESENTATION('',(#15705),#15711);+#15705 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#15706,#15707,#15708,#15709,+ #15710),.UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),+ .PIECEWISE_BEZIER_KNOTS.);+#15706 = CARTESIAN_POINT('',(3.116191936536,-0.413396055253));+#15707 = CARTESIAN_POINT('',(3.119525720594,-0.410917905579));+#15708 = CARTESIAN_POINT('',(3.123010497379,-0.409442987047));+#15709 = CARTESIAN_POINT('',(3.126646206098,-0.40897150412));+#15710 = CARTESIAN_POINT('',(3.130432741199,-0.409503363856));+#15711 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15712 = PCURVE('',#15713,#15720);+#15713 = SURFACE_OF_LINEAR_EXTRUSION('',#15714,#15718);+#15714 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#15715,#15716,#15717),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#15715 = CARTESIAN_POINT('',(0.516104909228,-7.878370804205E-03,+ 1.8000001));+#15716 = CARTESIAN_POINT('',(0.510733292771,-2.435132794027E-03,+ 1.8000001));+#15717 = CARTESIAN_POINT('',(0.510733292771,5.872967326771E-03,1.8000001+ ));+#15718 = VECTOR('',#15719,1.);+#15719 = DIRECTION('',(0.,0.,1.));+#15720 = DEFINITIONAL_REPRESENTATION('',(#15721),#15727);+#15721 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#15722,#15723,#15724,#15725,+ #15726),.UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),+ .PIECEWISE_BEZIER_KNOTS.);+#15722 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#15723 = CARTESIAN_POINT('',(0.750005722342,-5.00001E-02));+#15724 = CARTESIAN_POINT('',(0.500003513167,-5.00001E-02));+#15725 = CARTESIAN_POINT('',(0.249999546906,-5.00001E-02));+#15726 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#15727 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15728 = ORIENTED_EDGE('',*,*,#15729,.T.);+#15729 = EDGE_CURVE('',#15694,#15730,#15732,.T.);+#15730 = VERTEX_POINT('',#15731);+#15731 = CARTESIAN_POINT('',(0.529498139595,-1.332160881438E-02,1.75));+#15732 = SURFACE_CURVE('',#15733,(#15739,#15748),.PCURVE_S1.);+#15733 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#15734,#15735,#15736,#15737,+ #15738),.UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),+ .PIECEWISE_BEZIER_KNOTS.);+#15734 = CARTESIAN_POINT('',(0.516104909228,-7.878370804206E-03,1.75));+#15735 = CARTESIAN_POINT('',(0.518790700395,-1.059997251975E-02,1.75));+#15736 = CARTESIAN_POINT('',(0.521918207309,-1.241443527752E-02,1.75));+#15737 = CARTESIAN_POINT('',(0.52548740514,-1.332160881438E-02,1.75));+#15738 = CARTESIAN_POINT('',(0.529498139595,-1.332160881438E-02,1.75));+#15739 = PCURVE('',#15343,#15740);+#15740 = DEFINITIONAL_REPRESENTATION('',(#15741),#15747);+#15741 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#15742,#15743,#15744,#15745,+ #15746),.UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),+ .PIECEWISE_BEZIER_KNOTS.);+#15742 = CARTESIAN_POINT('',(3.130432741199,-0.409503363856));+#15743 = CARTESIAN_POINT('',(3.134219259108,-0.410035221178));+#15744 = CARTESIAN_POINT('',(3.13754126364,-0.41146275769));+#15745 = CARTESIAN_POINT('',(3.140398619384,-0.413786043107));+#15746 = CARTESIAN_POINT('',(3.142791327139,-0.417004884587));+#15747 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15748 = PCURVE('',#15749,#15756);+#15749 = SURFACE_OF_LINEAR_EXTRUSION('',#15750,#15754);+#15750 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#15751,#15752,#15753),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#15751 = CARTESIAN_POINT('',(0.529498139595,-1.332160881438E-02,+ 1.8000001));+#15752 = CARTESIAN_POINT('',(0.521476525686,-1.332160881438E-02,+ 1.8000001));+#15753 = CARTESIAN_POINT('',(0.516104909228,-7.878370804205E-03,+ 1.8000001));+#15754 = VECTOR('',#15755,1.);+#15755 = DIRECTION('',(0.,0.,1.));+#15756 = DEFINITIONAL_REPRESENTATION('',(#15757),#15763);+#15757 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#15758,#15759,#15760,#15761,+ #15762),.UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),+ .PIECEWISE_BEZIER_KNOTS.);+#15758 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#15759 = CARTESIAN_POINT('',(0.750001588167,-5.00001E-02));+#15760 = CARTESIAN_POINT('',(0.499998045954,-5.00001E-02));+#15761 = CARTESIAN_POINT('',(0.249995480992,-5.00001E-02));+#15762 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#15763 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15764 = ORIENTED_EDGE('',*,*,#15765,.T.);+#15765 = EDGE_CURVE('',#15730,#15766,#15768,.T.);+#15766 = VERTEX_POINT('',#15767);+#15767 = CARTESIAN_POINT('',(0.543321099279,-7.735127698674E-03,1.75));+#15768 = SURFACE_CURVE('',#15769,(#15775,#15784),.PCURVE_S1.);+#15769 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#15770,#15771,#15772,#15773,+ #15774),.UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),+ .PIECEWISE_BEZIER_KNOTS.);+#15770 = CARTESIAN_POINT('',(0.529498139595,-1.332160881438E-02,1.75));+#15771 = CARTESIAN_POINT('',(0.533580503047,-1.332160881438E-02,1.75));+#15772 = CARTESIAN_POINT('',(0.537245198803,-1.239055830363E-02,1.75));+#15773 = CARTESIAN_POINT('',(0.540492073558,-1.052834296785E-02,1.75));+#15774 = CARTESIAN_POINT('',(0.543321099279,-7.735127698675E-03,1.75));+#15775 = PCURVE('',#15343,#15776);+#15776 = DEFINITIONAL_REPRESENTATION('',(#15777),#15783);+#15777 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#15778,#15779,#15780,#15781,+ #15782),.UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),+ .PIECEWISE_BEZIER_KNOTS.);+#15778 = CARTESIAN_POINT('',(3.142791327139,-0.417004884587));+#15779 = CARTESIAN_POINT('',(3.14522676703,-0.420281212393));+#15780 = CARTESIAN_POINT('',(3.146665815666,-0.423777780576));+#15781 = CARTESIAN_POINT('',(3.147108289845,-0.427494534298));+#15782 = CARTESIAN_POINT('',(3.146554305178,-0.431431352691));+#15783 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15784 = PCURVE('',#15785,#15792);+#15785 = SURFACE_OF_LINEAR_EXTRUSION('',#15786,#15790);+#15786 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#15787,#15788,#15789),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#15787 = CARTESIAN_POINT('',(0.543321099279,-7.735127698674E-03,+ 1.8000001));+#15788 = CARTESIAN_POINT('',(0.537662996611,-1.332160881438E-02,+ 1.8000001));+#15789 = CARTESIAN_POINT('',(0.529498139595,-1.332160881438E-02,+ 1.8000001));+#15790 = VECTOR('',#15791,1.);+#15791 = DIRECTION('',(0.,0.,1.));+#15792 = DEFINITIONAL_REPRESENTATION('',(#15793),#15799);+#15793 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#15794,#15795,#15796,#15797,+ #15798),.UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),+ .PIECEWISE_BEZIER_KNOTS.);+#15794 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#15795 = CARTESIAN_POINT('',(0.750003983904,-5.00001E-02));+#15796 = CARTESIAN_POINT('',(0.500001147114,-5.00001E-02));+#15797 = CARTESIAN_POINT('',(0.249997736618,-5.00001E-02));+#15798 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#15799 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15800 = ORIENTED_EDGE('',*,*,#15801,.T.);+#15801 = EDGE_CURVE('',#15766,#15802,#15804,.T.);+#15802 = VERTEX_POINT('',#15803);+#15803 = CARTESIAN_POINT('',(0.548979201948,5.872967326771E-03,1.75));+#15804 = SURFACE_CURVE('',#15805,(#15811,#15820),.PCURVE_S1.);+#15805 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#15806,#15807,#15808,#15809,+ #15810),.UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),+ .PIECEWISE_BEZIER_KNOTS.);+#15806 = CARTESIAN_POINT('',(0.543321099279,-7.735127698675E-03,1.75));+#15807 = CARTESIAN_POINT('',(0.546150118017,-4.941919324473E-03,1.75));+#15808 = CARTESIAN_POINT('',(0.548036210804,-1.74279628667E-03,1.75));+#15809 = CARTESIAN_POINT('',(0.548979201948,1.862215593443E-03,1.75));+#15810 = CARTESIAN_POINT('',(0.548979201948,5.872967326771E-03,1.75));+#15811 = PCURVE('',#15343,#15812);+#15812 = DEFINITIONAL_REPRESENTATION('',(#15813),#15819);+#15813 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#15814,#15815,#15816,#15817,+ #15818),.UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),+ .PIECEWISE_BEZIER_KNOTS.);+#15814 = CARTESIAN_POINT('',(3.146554305178,-0.431431352691));+#15815 = CARTESIAN_POINT('',(3.146000321879,-0.435368161366));+#15816 = CARTESIAN_POINT('',(3.144558042126,-0.438790377509));+#15817 = CARTESIAN_POINT('',(3.14222738183,-0.441697844712));+#15818 = CARTESIAN_POINT('',(3.139008526483,-0.444090562774));+#15819 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15820 = PCURVE('',#15821,#15828);+#15821 = SURFACE_OF_LINEAR_EXTRUSION('',#15822,#15826);+#15822 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#15823,#15824,#15825),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#15823 = CARTESIAN_POINT('',(0.548979201948,5.872967326771E-03,1.8000001+ ));+#15824 = CARTESIAN_POINT('',(0.548979201948,-2.148646582965E-03,+ 1.8000001));+#15825 = CARTESIAN_POINT('',(0.543321099279,-7.735127698674E-03,+ 1.8000001));+#15826 = VECTOR('',#15827,1.);+#15827 = DIRECTION('',(0.,0.,1.));+#15828 = DEFINITIONAL_REPRESENTATION('',(#15829),#15835);+#15829 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#15830,#15831,#15832,#15833,+ #15834),.UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),+ .PIECEWISE_BEZIER_KNOTS.);+#15830 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#15831 = CARTESIAN_POINT('',(0.750002880494,-5.00001E-02));+#15832 = CARTESIAN_POINT('',(0.499999625607,-5.00001E-02));+#15833 = CARTESIAN_POINT('',(0.249996557953,-5.00001E-02));+#15834 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#15835 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15836 = ORIENTED_EDGE('',*,*,#15837,.T.);+#15837 = EDGE_CURVE('',#15802,#15838,#15840,.T.);+#15838 = VERTEX_POINT('',#15839);+#15839 = CARTESIAN_POINT('',(0.543249477726,1.948106235222E-02,1.75));+#15840 = SURFACE_CURVE('',#15841,(#15847,#15856),.PCURVE_S1.);+#15841 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#15842,#15843,#15844,#15845,+ #15846),.UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),+ .PIECEWISE_BEZIER_KNOTS.);+#15842 = CARTESIAN_POINT('',(0.548979201948,5.872967326771E-03,1.75));+#15843 = CARTESIAN_POINT('',(0.548979201948,9.812117711745E-03,1.75));+#15844 = CARTESIAN_POINT('',(0.548024264888,1.339325558966E-02,1.75));+#15845 = CARTESIAN_POINT('',(0.546114293801,1.661624627719E-02,1.75));+#15846 = CARTESIAN_POINT('',(0.543249477726,1.948106235222E-02,1.75));+#15847 = PCURVE('',#15343,#15848);+#15848 = DEFINITIONAL_REPRESENTATION('',(#15849),#15855);+#15849 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#15850,#15851,#15852,#15853,+ #15854),.UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),+ .PIECEWISE_BEZIER_KNOTS.);+#15850 = CARTESIAN_POINT('',(3.139008526483,-0.444090562774));+#15851 = CARTESIAN_POINT('',(3.135847135273,-0.446440565193));+#15852 = CARTESIAN_POINT('',(3.132403376877,-0.4478105949));+#15853 = CARTESIAN_POINT('',(3.128677301538,-0.448200493724));+#15854 = CARTESIAN_POINT('',(3.12466904404,-0.447610397022));+#15855 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15856 = PCURVE('',#15857,#15864);+#15857 = SURFACE_OF_LINEAR_EXTRUSION('',#15858,#15862);+#15858 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#15859,#15860,#15861),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#15859 = CARTESIAN_POINT('',(0.543249477726,1.948106235222E-02,1.8000001+ ));+#15860 = CARTESIAN_POINT('',(0.548979201948,1.375133813098E-02,1.8000001+ ));+#15861 = CARTESIAN_POINT('',(0.548979201948,5.872967326771E-03,1.8000001+ ));+#15862 = VECTOR('',#15863,1.);+#15863 = DIRECTION('',(0.,0.,1.));+#15864 = DEFINITIONAL_REPRESENTATION('',(#15865),#15871);+#15865 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#15866,#15867,#15868,#15869,+ #15870),.UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),+ .PIECEWISE_BEZIER_KNOTS.);+#15866 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#15867 = CARTESIAN_POINT('',(0.750002222359,-5.00001E-02));+#15868 = CARTESIAN_POINT('',(0.499998803308,-5.00001E-02));+#15869 = CARTESIAN_POINT('',(0.249995982739,-5.00001E-02));+#15870 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#15871 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15872 = ORIENTED_EDGE('',*,*,#15873,.T.);+#15873 = EDGE_CURVE('',#15838,#15620,#15874,.T.);+#15874 = SURFACE_CURVE('',#15875,(#15881,#15890),.PCURVE_S1.);+#15875 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#15876,#15877,#15878,#15879,+ #15880),.UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),+ .PIECEWISE_BEZIER_KNOTS.);+#15876 = CARTESIAN_POINT('',(0.543249477726,1.948106235222E-02,1.75));+#15877 = CARTESIAN_POINT('',(0.540384655735,2.234588434332E-02,1.75));+#15878 = CARTESIAN_POINT('',(0.537137787604,2.425585426794E-02,1.75));+#15879 = CARTESIAN_POINT('',(0.533508900914,2.521078657346E-02,1.75));+#15880 = CARTESIAN_POINT('',(0.529498139595,2.521078657346E-02,1.75));+#15881 = PCURVE('',#15343,#15882);+#15882 = DEFINITIONAL_REPRESENTATION('',(#15883),#15889);+#15883 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#15884,#15885,#15886,#15887,+ #15888),.UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),+ .PIECEWISE_BEZIER_KNOTS.);+#15884 = CARTESIAN_POINT('',(3.12466904404,-0.447610397022));+#15885 = CARTESIAN_POINT('',(3.120660778265,-0.4470202991));+#15886 = CARTESIAN_POINT('',(3.117190915793,-0.445553945733));+#15887 = CARTESIAN_POINT('',(3.114259621993,-0.44321124836));+#15888 = CARTESIAN_POINT('',(3.111866898213,-0.439992385321));+#15889 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15890 = PCURVE('',#15891,#15898);+#15891 = SURFACE_OF_LINEAR_EXTRUSION('',#15892,#15896);+#15892 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#15893,#15894,#15895),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#15893 = CARTESIAN_POINT('',(0.529498139595,2.521078657346E-02,1.8000001+ ));+#15894 = CARTESIAN_POINT('',(0.537519753505,2.521078657346E-02,1.8000001+ ));+#15895 = CARTESIAN_POINT('',(0.543249477726,1.948106235222E-02,1.8000001+ ));+#15896 = VECTOR('',#15897,1.);+#15897 = DIRECTION('',(0.,0.,1.));+#15898 = DEFINITIONAL_REPRESENTATION('',(#15899),#15905);+#15899 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#15900,#15901,#15902,#15903,+ #15904),.UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),+ .PIECEWISE_BEZIER_KNOTS.);+#15900 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#15901 = CARTESIAN_POINT('',(0.750003500999,-5.00001E-02));+#15902 = CARTESIAN_POINT('',(0.500000437649,-5.00001E-02));+#15903 = CARTESIAN_POINT('',(0.24999715541,-5.00001E-02));+#15904 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#15905 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15906 = ADVANCED_FACE('',(#15907),#15677,.T.);+#15907 = FACE_BOUND('',#15908,.T.);+#15908 = EDGE_LOOP('',(#15909,#15910,#15933,#15961));+#15909 = ORIENTED_EDGE('',*,*,#15657,.T.);+#15910 = ORIENTED_EDGE('',*,*,#15911,.T.);+#15911 = EDGE_CURVE('',#15658,#15912,#15914,.T.);+#15912 = VERTEX_POINT('',#15913);+#15913 = CARTESIAN_POINT('',(0.510733292771,5.872967326771E-03,1.7000001+ ));+#15914 = SURFACE_CURVE('',#15915,(#15919,#15926),.PCURVE_S1.);+#15915 = LINE('',#15916,#15917);+#15916 = CARTESIAN_POINT('',(0.510733292771,5.872967326771E-03,1.8000001+ ));+#15917 = VECTOR('',#15918,1.);+#15918 = DIRECTION('',(-0.,-0.,-1.));+#15919 = PCURVE('',#15677,#15920);+#15920 = DEFINITIONAL_REPRESENTATION('',(#15921),#15925);+#15921 = LINE('',#15922,#15923);+#15922 = CARTESIAN_POINT('',(0.,0.));+#15923 = VECTOR('',#15924,1.);+#15924 = DIRECTION('',(0.,-1.));+#15925 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15926 = PCURVE('',#15713,#15927);+#15927 = DEFINITIONAL_REPRESENTATION('',(#15928),#15932);+#15928 = LINE('',#15929,#15930);+#15929 = CARTESIAN_POINT('',(1.,0.));+#15930 = VECTOR('',#15931,1.);+#15931 = DIRECTION('',(0.,-1.));+#15932 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15933 = ORIENTED_EDGE('',*,*,#15934,.T.);+#15934 = EDGE_CURVE('',#15912,#15935,#15937,.T.);+#15935 = VERTEX_POINT('',#15936);+#15936 = CARTESIAN_POINT('',(0.516248152334,1.948106235222E-02,1.7000001+ ));+#15937 = SURFACE_CURVE('',#15938,(#15942,#15949),.PCURVE_S1.);+#15938 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#15939,#15940,#15941),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#15939 = CARTESIAN_POINT('',(0.510733292771,5.872967326771E-03,1.7000001+ ));+#15940 = CARTESIAN_POINT('',(0.510733292771,1.375133813098E-02,1.7000001+ ));+#15941 = CARTESIAN_POINT('',(0.516248152334,1.948106235222E-02,1.7000001+ ));+#15942 = PCURVE('',#15677,#15943);+#15943 = DEFINITIONAL_REPRESENTATION('',(#15944),#15948);+#15944 = LINE('',#15945,#15946);+#15945 = CARTESIAN_POINT('',(0.,-0.1));+#15946 = VECTOR('',#15947,1.);+#15947 = DIRECTION('',(1.,0.));+#15948 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15949 = PCURVE('',#15950,#15955);+#15950 = PLANE('',#15951);+#15951 = AXIS2_PLACEMENT_3D('',#15952,#15953,#15954);+#15952 = CARTESIAN_POINT('',(0.441546872799,-0.101559361821,1.7000001));+#15953 = DIRECTION('',(0.,0.,1.));+#15954 = DIRECTION('',(1.,0.,0.));+#15955 = DEFINITIONAL_REPRESENTATION('',(#15956),#15960);+#15956 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#15957,#15958,#15959),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#15957 = CARTESIAN_POINT('',(6.918641997148E-02,0.107432329148));+#15958 = CARTESIAN_POINT('',(6.918641997148E-02,0.115310699952));+#15959 = CARTESIAN_POINT('',(7.470127953442E-02,0.121040424174));+#15960 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15961 = ORIENTED_EDGE('',*,*,#15962,.F.);+#15962 = EDGE_CURVE('',#15622,#15935,#15963,.T.);+#15963 = SURFACE_CURVE('',#15964,(#15968,#15975),.PCURVE_S1.);+#15964 = LINE('',#15965,#15966);+#15965 = CARTESIAN_POINT('',(0.516248152334,1.948106235222E-02,1.8000001+ ));+#15966 = VECTOR('',#15967,1.);+#15967 = DIRECTION('',(-0.,-0.,-1.));+#15968 = PCURVE('',#15677,#15969);+#15969 = DEFINITIONAL_REPRESENTATION('',(#15970),#15974);+#15970 = LINE('',#15971,#15972);+#15971 = CARTESIAN_POINT('',(1.,0.));+#15972 = VECTOR('',#15973,1.);+#15973 = DIRECTION('',(0.,-1.));+#15974 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15975 = PCURVE('',#15641,#15976);+#15976 = DEFINITIONAL_REPRESENTATION('',(#15977),#15981);+#15977 = LINE('',#15978,#15979);+#15978 = CARTESIAN_POINT('',(0.,0.));+#15979 = VECTOR('',#15980,1.);+#15980 = DIRECTION('',(0.,-1.));+#15981 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15982 = ADVANCED_FACE('',(#15983),#15950,.T.);+#15983 = FACE_BOUND('',#15984,.F.);+#15984 = EDGE_LOOP('',(#15985,#15986,#16009,#16032,#16055,#16078,#16101,+ #16124));+#15985 = ORIENTED_EDGE('',*,*,#15934,.T.);+#15986 = ORIENTED_EDGE('',*,*,#15987,.T.);+#15987 = EDGE_CURVE('',#15935,#15988,#15990,.T.);+#15988 = VERTEX_POINT('',#15989);+#15989 = CARTESIAN_POINT('',(0.529498139595,2.521078657346E-02,1.7000001+ ));+#15990 = SURFACE_CURVE('',#15991,(#15995,#16002),.PCURVE_S1.);+#15991 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#15992,#15993,#15994),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#15992 = CARTESIAN_POINT('',(0.516248152334,1.948106235222E-02,1.7000001+ ));+#15993 = CARTESIAN_POINT('',(0.521763011897,2.521078657346E-02,1.7000001+ ));+#15994 = CARTESIAN_POINT('',(0.529498139595,2.521078657346E-02,1.7000001+ ));+#15995 = PCURVE('',#15950,#15996);+#15996 = DEFINITIONAL_REPRESENTATION('',(#15997),#16001);+#15997 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#15998,#15999,#16000),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#15998 = CARTESIAN_POINT('',(7.470127953442E-02,0.121040424174));+#15999 = CARTESIAN_POINT('',(8.021613909736E-02,0.126770148395));+#16000 = CARTESIAN_POINT('',(8.795126679604E-02,0.126770148395));+#16001 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16002 = PCURVE('',#15641,#16003);+#16003 = DEFINITIONAL_REPRESENTATION('',(#16004),#16008);+#16004 = LINE('',#16005,#16006);+#16005 = CARTESIAN_POINT('',(0.,-0.1));+#16006 = VECTOR('',#16007,1.);+#16007 = DIRECTION('',(1.,0.));+#16008 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16009 = ORIENTED_EDGE('',*,*,#16010,.T.);+#16010 = EDGE_CURVE('',#15988,#16011,#16013,.T.);+#16011 = VERTEX_POINT('',#16012);+#16012 = CARTESIAN_POINT('',(0.543249477726,1.948106235222E-02,1.7000001+ ));+#16013 = SURFACE_CURVE('',#16014,(#16018,#16025),.PCURVE_S1.);+#16014 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#16015,#16016,#16017),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#16015 = CARTESIAN_POINT('',(0.529498139595,2.521078657346E-02,1.7000001+ ));+#16016 = CARTESIAN_POINT('',(0.537519753505,2.521078657346E-02,1.7000001+ ));+#16017 = CARTESIAN_POINT('',(0.543249477726,1.948106235222E-02,1.7000001+ ));+#16018 = PCURVE('',#15950,#16019);+#16019 = DEFINITIONAL_REPRESENTATION('',(#16020),#16024);+#16020 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#16021,#16022,#16023),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#16021 = CARTESIAN_POINT('',(8.795126679604E-02,0.126770148395));+#16022 = CARTESIAN_POINT('',(9.597288070577E-02,0.126770148395));+#16023 = CARTESIAN_POINT('',(0.101702604927,0.121040424174));+#16024 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16025 = PCURVE('',#15891,#16026);+#16026 = DEFINITIONAL_REPRESENTATION('',(#16027),#16031);+#16027 = LINE('',#16028,#16029);+#16028 = CARTESIAN_POINT('',(0.,-0.1));+#16029 = VECTOR('',#16030,1.);+#16030 = DIRECTION('',(1.,0.));+#16031 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16032 = ORIENTED_EDGE('',*,*,#16033,.T.);+#16033 = EDGE_CURVE('',#16011,#16034,#16036,.T.);+#16034 = VERTEX_POINT('',#16035);+#16035 = CARTESIAN_POINT('',(0.548979201948,5.872967326771E-03,1.7000001+ ));+#16036 = SURFACE_CURVE('',#16037,(#16041,#16048),.PCURVE_S1.);+#16037 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#16038,#16039,#16040),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#16038 = CARTESIAN_POINT('',(0.543249477726,1.948106235222E-02,1.7000001+ ));+#16039 = CARTESIAN_POINT('',(0.548979201948,1.375133813098E-02,1.7000001+ ));+#16040 = CARTESIAN_POINT('',(0.548979201948,5.872967326771E-03,1.7000001+ ));+#16041 = PCURVE('',#15950,#16042);+#16042 = DEFINITIONAL_REPRESENTATION('',(#16043),#16047);+#16043 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#16044,#16045,#16046),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#16044 = CARTESIAN_POINT('',(0.101702604927,0.121040424174));+#16045 = CARTESIAN_POINT('',(0.107432329148,0.115310699952));+#16046 = CARTESIAN_POINT('',(0.107432329148,0.107432329148));+#16047 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16048 = PCURVE('',#15857,#16049);+#16049 = DEFINITIONAL_REPRESENTATION('',(#16050),#16054);+#16050 = LINE('',#16051,#16052);+#16051 = CARTESIAN_POINT('',(0.,-0.1));+#16052 = VECTOR('',#16053,1.);+#16053 = DIRECTION('',(1.,0.));+#16054 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16055 = ORIENTED_EDGE('',*,*,#16056,.T.);+#16056 = EDGE_CURVE('',#16034,#16057,#16059,.T.);+#16057 = VERTEX_POINT('',#16058);+#16058 = CARTESIAN_POINT('',(0.543321099279,-7.735127698674E-03,+ 1.7000001));+#16059 = SURFACE_CURVE('',#16060,(#16064,#16071),.PCURVE_S1.);+#16060 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#16061,#16062,#16063),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#16061 = CARTESIAN_POINT('',(0.548979201948,5.872967326771E-03,1.7000001+ ));+#16062 = CARTESIAN_POINT('',(0.548979201948,-2.148646582965E-03,+ 1.7000001));+#16063 = CARTESIAN_POINT('',(0.543321099279,-7.735127698674E-03,+ 1.7000001));+#16064 = PCURVE('',#15950,#16065);+#16065 = DEFINITIONAL_REPRESENTATION('',(#16066),#16070);+#16066 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#16067,#16068,#16069),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#16067 = CARTESIAN_POINT('',(0.107432329148,0.107432329148));+#16068 = CARTESIAN_POINT('',(0.107432329148,9.941071523852E-02));+#16069 = CARTESIAN_POINT('',(0.10177422648,9.382423412281E-02));+#16070 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16071 = PCURVE('',#15821,#16072);+#16072 = DEFINITIONAL_REPRESENTATION('',(#16073),#16077);+#16073 = LINE('',#16074,#16075);+#16074 = CARTESIAN_POINT('',(0.,-0.1));+#16075 = VECTOR('',#16076,1.);+#16076 = DIRECTION('',(1.,0.));+#16077 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16078 = ORIENTED_EDGE('',*,*,#16079,.T.);+#16079 = EDGE_CURVE('',#16057,#16080,#16082,.T.);+#16080 = VERTEX_POINT('',#16081);+#16081 = CARTESIAN_POINT('',(0.529498139595,-1.332160881438E-02,+ 1.7000001));+#16082 = SURFACE_CURVE('',#16083,(#16087,#16094),.PCURVE_S1.);+#16083 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#16084,#16085,#16086),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#16084 = CARTESIAN_POINT('',(0.543321099279,-7.735127698674E-03,+ 1.7000001));+#16085 = CARTESIAN_POINT('',(0.537662996611,-1.332160881438E-02,+ 1.7000001));+#16086 = CARTESIAN_POINT('',(0.529498139595,-1.332160881438E-02,+ 1.7000001));+#16087 = PCURVE('',#15950,#16088);+#16088 = DEFINITIONAL_REPRESENTATION('',(#16089),#16093);+#16089 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#16090,#16091,#16092),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#16090 = CARTESIAN_POINT('',(0.10177422648,9.382423412281E-02));+#16091 = CARTESIAN_POINT('',(9.61161238113E-02,8.82377530071E-02));+#16092 = CARTESIAN_POINT('',(8.795126679604E-02,8.82377530071E-02));+#16093 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16094 = PCURVE('',#15785,#16095);+#16095 = DEFINITIONAL_REPRESENTATION('',(#16096),#16100);+#16096 = LINE('',#16097,#16098);+#16097 = CARTESIAN_POINT('',(0.,-0.1));+#16098 = VECTOR('',#16099,1.);+#16099 = DIRECTION('',(1.,0.));+#16100 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16101 = ORIENTED_EDGE('',*,*,#16102,.T.);+#16102 = EDGE_CURVE('',#16080,#16103,#16105,.T.);+#16103 = VERTEX_POINT('',#16104);+#16104 = CARTESIAN_POINT('',(0.516104909228,-7.878370804205E-03,+ 1.7000001));+#16105 = SURFACE_CURVE('',#16106,(#16110,#16117),.PCURVE_S1.);+#16106 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#16107,#16108,#16109),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#16107 = CARTESIAN_POINT('',(0.529498139595,-1.332160881438E-02,+ 1.7000001));+#16108 = CARTESIAN_POINT('',(0.521476525686,-1.332160881438E-02,+ 1.7000001));+#16109 = CARTESIAN_POINT('',(0.516104909228,-7.878370804205E-03,+ 1.7000001));+#16110 = PCURVE('',#15950,#16111);+#16111 = DEFINITIONAL_REPRESENTATION('',(#16112),#16116);+#16112 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#16113,#16114,#16115),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#16113 = CARTESIAN_POINT('',(8.795126679604E-02,8.82377530071E-02));+#16114 = CARTESIAN_POINT('',(7.99296528863E-02,8.82377530071E-02));+#16115 = CARTESIAN_POINT('',(7.455803642889E-02,9.368099101728E-02));+#16116 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16117 = PCURVE('',#15749,#16118);+#16118 = DEFINITIONAL_REPRESENTATION('',(#16119),#16123);+#16119 = LINE('',#16120,#16121);+#16120 = CARTESIAN_POINT('',(0.,-0.1));+#16121 = VECTOR('',#16122,1.);+#16122 = DIRECTION('',(1.,0.));+#16123 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16124 = ORIENTED_EDGE('',*,*,#16125,.T.);+#16125 = EDGE_CURVE('',#16103,#15912,#16126,.T.);+#16126 = SURFACE_CURVE('',#16127,(#16131,#16138),.PCURVE_S1.);+#16127 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#16128,#16129,#16130),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#16128 = CARTESIAN_POINT('',(0.516104909228,-7.878370804205E-03,+ 1.7000001));+#16129 = CARTESIAN_POINT('',(0.510733292771,-2.435132794027E-03,+ 1.7000001));+#16130 = CARTESIAN_POINT('',(0.510733292771,5.872967326771E-03,1.7000001+ ));+#16131 = PCURVE('',#15950,#16132);+#16132 = DEFINITIONAL_REPRESENTATION('',(#16133),#16137);+#16133 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#16134,#16135,#16136),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#16134 = CARTESIAN_POINT('',(7.455803642889E-02,9.368099101728E-02));+#16135 = CARTESIAN_POINT('',(6.918641997148E-02,9.912422902746E-02));+#16136 = CARTESIAN_POINT('',(6.918641997148E-02,0.107432329148));+#16137 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16138 = PCURVE('',#15713,#16139);+#16139 = DEFINITIONAL_REPRESENTATION('',(#16140),#16144);+#16140 = LINE('',#16141,#16142);+#16141 = CARTESIAN_POINT('',(0.,-0.1));+#16142 = VECTOR('',#16143,1.);+#16143 = DIRECTION('',(1.,0.));+#16144 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16145 = ADVANCED_FACE('',(#16146),#15713,.T.);+#16146 = FACE_BOUND('',#16147,.T.);+#16147 = EDGE_LOOP('',(#16148,#16149,#16170,#16171));+#16148 = ORIENTED_EDGE('',*,*,#15693,.T.);+#16149 = ORIENTED_EDGE('',*,*,#16150,.T.);+#16150 = EDGE_CURVE('',#15694,#16103,#16151,.T.);+#16151 = SURFACE_CURVE('',#16152,(#16156,#16163),.PCURVE_S1.);+#16152 = LINE('',#16153,#16154);+#16153 = CARTESIAN_POINT('',(0.516104909228,-7.878370804205E-03,+ 1.8000001));+#16154 = VECTOR('',#16155,1.);+#16155 = DIRECTION('',(-0.,-0.,-1.));+#16156 = PCURVE('',#15713,#16157);+#16157 = DEFINITIONAL_REPRESENTATION('',(#16158),#16162);+#16158 = LINE('',#16159,#16160);+#16159 = CARTESIAN_POINT('',(0.,0.));+#16160 = VECTOR('',#16161,1.);+#16161 = DIRECTION('',(0.,-1.));+#16162 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16163 = PCURVE('',#15749,#16164);+#16164 = DEFINITIONAL_REPRESENTATION('',(#16165),#16169);+#16165 = LINE('',#16166,#16167);+#16166 = CARTESIAN_POINT('',(1.,0.));+#16167 = VECTOR('',#16168,1.);+#16168 = DIRECTION('',(0.,-1.));+#16169 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16170 = ORIENTED_EDGE('',*,*,#16125,.T.);+#16171 = ORIENTED_EDGE('',*,*,#15911,.F.);+#16172 = ADVANCED_FACE('',(#16173),#15749,.T.);+#16173 = FACE_BOUND('',#16174,.T.);+#16174 = EDGE_LOOP('',(#16175,#16176,#16197,#16198));+#16175 = ORIENTED_EDGE('',*,*,#15729,.T.);+#16176 = ORIENTED_EDGE('',*,*,#16177,.T.);+#16177 = EDGE_CURVE('',#15730,#16080,#16178,.T.);+#16178 = SURFACE_CURVE('',#16179,(#16183,#16190),.PCURVE_S1.);+#16179 = LINE('',#16180,#16181);+#16180 = CARTESIAN_POINT('',(0.529498139595,-1.332160881438E-02,+ 1.8000001));+#16181 = VECTOR('',#16182,1.);+#16182 = DIRECTION('',(-0.,-0.,-1.));+#16183 = PCURVE('',#15749,#16184);+#16184 = DEFINITIONAL_REPRESENTATION('',(#16185),#16189);+#16185 = LINE('',#16186,#16187);+#16186 = CARTESIAN_POINT('',(0.,0.));+#16187 = VECTOR('',#16188,1.);+#16188 = DIRECTION('',(0.,-1.));+#16189 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16190 = PCURVE('',#15785,#16191);+#16191 = DEFINITIONAL_REPRESENTATION('',(#16192),#16196);+#16192 = LINE('',#16193,#16194);+#16193 = CARTESIAN_POINT('',(1.,0.));+#16194 = VECTOR('',#16195,1.);+#16195 = DIRECTION('',(0.,-1.));+#16196 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16197 = ORIENTED_EDGE('',*,*,#16102,.T.);+#16198 = ORIENTED_EDGE('',*,*,#16150,.F.);+#16199 = ADVANCED_FACE('',(#16200),#15785,.T.);+#16200 = FACE_BOUND('',#16201,.T.);+#16201 = EDGE_LOOP('',(#16202,#16203,#16224,#16225));+#16202 = ORIENTED_EDGE('',*,*,#15765,.T.);+#16203 = ORIENTED_EDGE('',*,*,#16204,.T.);+#16204 = EDGE_CURVE('',#15766,#16057,#16205,.T.);+#16205 = SURFACE_CURVE('',#16206,(#16210,#16217),.PCURVE_S1.);+#16206 = LINE('',#16207,#16208);+#16207 = CARTESIAN_POINT('',(0.543321099279,-7.735127698674E-03,+ 1.8000001));+#16208 = VECTOR('',#16209,1.);+#16209 = DIRECTION('',(-0.,-0.,-1.));+#16210 = PCURVE('',#15785,#16211);+#16211 = DEFINITIONAL_REPRESENTATION('',(#16212),#16216);+#16212 = LINE('',#16213,#16214);+#16213 = CARTESIAN_POINT('',(0.,0.));+#16214 = VECTOR('',#16215,1.);+#16215 = DIRECTION('',(0.,-1.));+#16216 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16217 = PCURVE('',#15821,#16218);+#16218 = DEFINITIONAL_REPRESENTATION('',(#16219),#16223);+#16219 = LINE('',#16220,#16221);+#16220 = CARTESIAN_POINT('',(1.,0.));+#16221 = VECTOR('',#16222,1.);+#16222 = DIRECTION('',(0.,-1.));+#16223 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16224 = ORIENTED_EDGE('',*,*,#16079,.T.);+#16225 = ORIENTED_EDGE('',*,*,#16177,.F.);+#16226 = ADVANCED_FACE('',(#16227),#15821,.T.);+#16227 = FACE_BOUND('',#16228,.T.);+#16228 = EDGE_LOOP('',(#16229,#16230,#16251,#16252));+#16229 = ORIENTED_EDGE('',*,*,#15801,.T.);+#16230 = ORIENTED_EDGE('',*,*,#16231,.T.);+#16231 = EDGE_CURVE('',#15802,#16034,#16232,.T.);+#16232 = SURFACE_CURVE('',#16233,(#16237,#16244),.PCURVE_S1.);+#16233 = LINE('',#16234,#16235);+#16234 = CARTESIAN_POINT('',(0.548979201948,5.872967326771E-03,1.8000001+ ));+#16235 = VECTOR('',#16236,1.);+#16236 = DIRECTION('',(-0.,-0.,-1.));+#16237 = PCURVE('',#15821,#16238);+#16238 = DEFINITIONAL_REPRESENTATION('',(#16239),#16243);+#16239 = LINE('',#16240,#16241);+#16240 = CARTESIAN_POINT('',(0.,0.));+#16241 = VECTOR('',#16242,1.);+#16242 = DIRECTION('',(0.,-1.));+#16243 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16244 = PCURVE('',#15857,#16245);+#16245 = DEFINITIONAL_REPRESENTATION('',(#16246),#16250);+#16246 = LINE('',#16247,#16248);+#16247 = CARTESIAN_POINT('',(1.,0.));+#16248 = VECTOR('',#16249,1.);+#16249 = DIRECTION('',(0.,-1.));+#16250 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16251 = ORIENTED_EDGE('',*,*,#16056,.T.);+#16252 = ORIENTED_EDGE('',*,*,#16204,.F.);+#16253 = ADVANCED_FACE('',(#16254),#15857,.T.);+#16254 = FACE_BOUND('',#16255,.T.);+#16255 = EDGE_LOOP('',(#16256,#16257,#16278,#16279));+#16256 = ORIENTED_EDGE('',*,*,#15837,.T.);+#16257 = ORIENTED_EDGE('',*,*,#16258,.T.);+#16258 = EDGE_CURVE('',#15838,#16011,#16259,.T.);+#16259 = SURFACE_CURVE('',#16260,(#16264,#16271),.PCURVE_S1.);+#16260 = LINE('',#16261,#16262);+#16261 = CARTESIAN_POINT('',(0.543249477726,1.948106235222E-02,1.8000001+ ));+#16262 = VECTOR('',#16263,1.);+#16263 = DIRECTION('',(-0.,-0.,-1.));+#16264 = PCURVE('',#15857,#16265);+#16265 = DEFINITIONAL_REPRESENTATION('',(#16266),#16270);+#16266 = LINE('',#16267,#16268);+#16267 = CARTESIAN_POINT('',(0.,0.));+#16268 = VECTOR('',#16269,1.);+#16269 = DIRECTION('',(0.,-1.));+#16270 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16271 = PCURVE('',#15891,#16272);+#16272 = DEFINITIONAL_REPRESENTATION('',(#16273),#16277);+#16273 = LINE('',#16274,#16275);+#16274 = CARTESIAN_POINT('',(1.,0.));+#16275 = VECTOR('',#16276,1.);+#16276 = DIRECTION('',(0.,-1.));+#16277 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16278 = ORIENTED_EDGE('',*,*,#16033,.T.);+#16279 = ORIENTED_EDGE('',*,*,#16231,.F.);+#16280 = ADVANCED_FACE('',(#16281),#15891,.T.);+#16281 = FACE_BOUND('',#16282,.T.);+#16282 = EDGE_LOOP('',(#16283,#16284,#16305,#16306));+#16283 = ORIENTED_EDGE('',*,*,#15873,.T.);+#16284 = ORIENTED_EDGE('',*,*,#16285,.T.);+#16285 = EDGE_CURVE('',#15620,#15988,#16286,.T.);+#16286 = SURFACE_CURVE('',#16287,(#16291,#16298),.PCURVE_S1.);+#16287 = LINE('',#16288,#16289);+#16288 = CARTESIAN_POINT('',(0.529498139595,2.521078657346E-02,1.8000001+ ));+#16289 = VECTOR('',#16290,1.);+#16290 = DIRECTION('',(-0.,-0.,-1.));+#16291 = PCURVE('',#15891,#16292);+#16292 = DEFINITIONAL_REPRESENTATION('',(#16293),#16297);+#16293 = LINE('',#16294,#16295);+#16294 = CARTESIAN_POINT('',(0.,0.));+#16295 = VECTOR('',#16296,1.);+#16296 = DIRECTION('',(0.,-1.));+#16297 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16298 = PCURVE('',#15641,#16299);+#16299 = DEFINITIONAL_REPRESENTATION('',(#16300),#16304);+#16300 = LINE('',#16301,#16302);+#16301 = CARTESIAN_POINT('',(1.,0.));+#16302 = VECTOR('',#16303,1.);+#16303 = DIRECTION('',(0.,-1.));+#16304 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16305 = ORIENTED_EDGE('',*,*,#16010,.T.);+#16306 = ORIENTED_EDGE('',*,*,#16258,.F.);+#16307 = ADVANCED_FACE('',(#16308),#15641,.T.);+#16308 = FACE_BOUND('',#16309,.T.);+#16309 = EDGE_LOOP('',(#16310,#16311,#16312,#16313));+#16310 = ORIENTED_EDGE('',*,*,#15619,.T.);+#16311 = ORIENTED_EDGE('',*,*,#15962,.T.);+#16312 = ORIENTED_EDGE('',*,*,#15987,.T.);+#16313 = ORIENTED_EDGE('',*,*,#16285,.F.);+#16314 = ADVANCED_FACE('',(#16315),#15270,.T.);+#16315 = FACE_BOUND('',#16316,.T.);+#16316 = EDGE_LOOP('',(#16317,#16318,#16339,#16340));+#16317 = ORIENTED_EDGE('',*,*,#15465,.T.);+#16318 = ORIENTED_EDGE('',*,*,#16319,.T.);+#16319 = EDGE_CURVE('',#15466,#15225,#16320,.T.);+#16320 = SURFACE_CURVE('',#16321,(#16325,#16332),.PCURVE_S1.);+#16321 = LINE('',#16322,#16323);+#16322 = CARTESIAN_POINT('',(0.570035938461,5.156751799116E-03,1.8000001+ ));+#16323 = VECTOR('',#16324,1.);+#16324 = DIRECTION('',(-0.,-0.,-1.));+#16325 = PCURVE('',#15270,#16326);+#16326 = DEFINITIONAL_REPRESENTATION('',(#16327),#16331);+#16327 = LINE('',#16328,#16329);+#16328 = CARTESIAN_POINT('',(0.,0.));+#16329 = VECTOR('',#16330,1.);+#16330 = DIRECTION('',(0.,-1.));+#16331 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16332 = PCURVE('',#15240,#16333);+#16333 = DEFINITIONAL_REPRESENTATION('',(#16334),#16338);+#16334 = LINE('',#16335,#16336);+#16335 = CARTESIAN_POINT('',(1.,0.));+#16336 = VECTOR('',#16337,1.);+#16337 = DIRECTION('',(0.,-1.));+#16338 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16339 = ORIENTED_EDGE('',*,*,#15254,.T.);+#16340 = ORIENTED_EDGE('',*,*,#15360,.F.);+#16341 = ADVANCED_FACE('',(#16342),#15240,.T.);+#16342 = FACE_BOUND('',#16343,.T.);+#16343 = EDGE_LOOP('',(#16344,#16345,#16366,#16367));+#16344 = ORIENTED_EDGE('',*,*,#15494,.T.);+#16345 = ORIENTED_EDGE('',*,*,#16346,.T.);+#16346 = EDGE_CURVE('',#15495,#15195,#16347,.T.);+#16347 = SURFACE_CURVE('',#16348,(#16352,#16359),.PCURVE_S1.);+#16348 = LINE('',#16349,#16350);+#16349 = CARTESIAN_POINT('',(0.560080542626,-6.102156295621E-02,+ 1.8000001));+#16350 = VECTOR('',#16351,1.);+#16351 = DIRECTION('',(-0.,-0.,-1.));+#16352 = PCURVE('',#15240,#16353);+#16353 = DEFINITIONAL_REPRESENTATION('',(#16354),#16358);+#16354 = LINE('',#16355,#16356);+#16355 = CARTESIAN_POINT('',(0.,0.));+#16356 = VECTOR('',#16357,1.);+#16357 = DIRECTION('',(0.,-1.));+#16358 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16359 = PCURVE('',#15210,#16360);+#16360 = DEFINITIONAL_REPRESENTATION('',(#16361),#16365);+#16361 = LINE('',#16362,#16363);+#16362 = CARTESIAN_POINT('',(1.,0.));+#16363 = VECTOR('',#16364,1.);+#16364 = DIRECTION('',(0.,-1.));+#16365 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16366 = ORIENTED_EDGE('',*,*,#15224,.T.);+#16367 = ORIENTED_EDGE('',*,*,#16319,.F.);+#16368 = ADVANCED_FACE('',(#16369),#15210,.T.);+#16369 = FACE_BOUND('',#16370,.T.);+#16370 = EDGE_LOOP('',(#16371,#16372,#16393,#16394));+#16371 = ORIENTED_EDGE('',*,*,#15523,.T.);+#16372 = ORIENTED_EDGE('',*,*,#16373,.T.);+#16373 = EDGE_CURVE('',#15524,#15165,#16374,.T.);+#16374 = SURFACE_CURVE('',#16375,(#16379,#16386),.PCURVE_S1.);+#16375 = LINE('',#16376,#16377);+#16376 = CARTESIAN_POINT('',(0.529784625806,-8.279451499692E-02,+ 1.8000001));+#16377 = VECTOR('',#16378,1.);+#16378 = DIRECTION('',(-0.,-0.,-1.));+#16379 = PCURVE('',#15210,#16380);+#16380 = DEFINITIONAL_REPRESENTATION('',(#16381),#16385);+#16381 = LINE('',#16382,#16383);+#16382 = CARTESIAN_POINT('',(0.,0.));+#16383 = VECTOR('',#16384,1.);+#16384 = DIRECTION('',(0.,-1.));+#16385 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16386 = PCURVE('',#15180,#16387);+#16387 = DEFINITIONAL_REPRESENTATION('',(#16388),#16392);+#16388 = LINE('',#16389,#16390);+#16389 = CARTESIAN_POINT('',(1.,0.));+#16390 = VECTOR('',#16391,1.);+#16391 = DIRECTION('',(0.,-1.));+#16392 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16393 = ORIENTED_EDGE('',*,*,#15194,.T.);+#16394 = ORIENTED_EDGE('',*,*,#16346,.F.);+#16395 = ADVANCED_FACE('',(#16396),#15180,.T.);+#16396 = FACE_BOUND('',#16397,.T.);+#16397 = EDGE_LOOP('',(#16398,#16399,#16420,#16421));+#16398 = ORIENTED_EDGE('',*,*,#15561,.T.);+#16399 = ORIENTED_EDGE('',*,*,#16400,.T.);+#16400 = EDGE_CURVE('',#15562,#15135,#16401,.T.);+#16401 = SURFACE_CURVE('',#16402,(#16406,#16413),.PCURVE_S1.);+#16402 = LINE('',#16403,#16404);+#16403 = CARTESIAN_POINT('',(0.499631952092,-6.102156295621E-02,+ 1.8000001));+#16404 = VECTOR('',#16405,1.);+#16405 = DIRECTION('',(-0.,-0.,-1.));+#16406 = PCURVE('',#15180,#16407);+#16407 = DEFINITIONAL_REPRESENTATION('',(#16408),#16412);+#16408 = LINE('',#16409,#16410);+#16409 = CARTESIAN_POINT('',(0.,0.));+#16410 = VECTOR('',#16411,1.);+#16411 = DIRECTION('',(0.,-1.));+#16412 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16413 = PCURVE('',#15150,#16414);+#16414 = DEFINITIONAL_REPRESENTATION('',(#16415),#16419);+#16415 = LINE('',#16416,#16417);+#16416 = CARTESIAN_POINT('',(1.,0.));+#16417 = VECTOR('',#16418,1.);+#16418 = DIRECTION('',(0.,-1.));+#16419 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16420 = ORIENTED_EDGE('',*,*,#15164,.T.);+#16421 = ORIENTED_EDGE('',*,*,#16373,.F.);+#16422 = ADVANCED_FACE('',(#16423),#15150,.T.);+#16423 = FACE_BOUND('',#16424,.T.);+#16424 = EDGE_LOOP('',(#16425,#16426,#16447,#16448));+#16425 = ORIENTED_EDGE('',*,*,#15590,.T.);+#16426 = ORIENTED_EDGE('',*,*,#16427,.T.);+#16427 = EDGE_CURVE('',#15407,#15105,#16428,.T.);+#16428 = SURFACE_CURVE('',#16429,(#16433,#16440),.PCURVE_S1.);+#16429 = LINE('',#16430,#16431);+#16430 = CARTESIAN_POINT('',(0.489676556258,5.156751799116E-03,1.8000001+ ));+#16431 = VECTOR('',#16432,1.);+#16432 = DIRECTION('',(-0.,-0.,-1.));+#16433 = PCURVE('',#15150,#16434);+#16434 = DEFINITIONAL_REPRESENTATION('',(#16435),#16439);+#16435 = LINE('',#16436,#16437);+#16436 = CARTESIAN_POINT('',(0.,0.));+#16437 = VECTOR('',#16438,1.);+#16438 = DIRECTION('',(0.,-1.));+#16439 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16440 = PCURVE('',#15120,#16441);+#16441 = DEFINITIONAL_REPRESENTATION('',(#16442),#16446);+#16442 = LINE('',#16443,#16444);+#16443 = CARTESIAN_POINT('',(1.,0.));+#16444 = VECTOR('',#16445,1.);+#16445 = DIRECTION('',(0.,-1.));+#16446 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16447 = ORIENTED_EDGE('',*,*,#15134,.T.);+#16448 = ORIENTED_EDGE('',*,*,#16400,.F.);+#16449 = ADVANCED_FACE('',(#16450),#15120,.T.);+#16450 = FACE_BOUND('',#16451,.T.);+#16451 = EDGE_LOOP('',(#16452,#16453,#16474,#16475));+#16452 = ORIENTED_EDGE('',*,*,#15406,.T.);+#16453 = ORIENTED_EDGE('',*,*,#16454,.T.);+#16454 = EDGE_CURVE('',#15409,#15075,#16455,.T.);+#16455 = SURFACE_CURVE('',#16456,(#16460,#16467),.PCURVE_S1.);+#16456 = LINE('',#16457,#16458);+#16457 = CARTESIAN_POINT('',(0.499631952092,7.147830965997E-02,1.8000001+ ));+#16458 = VECTOR('',#16459,1.);+#16459 = DIRECTION('',(-0.,-0.,-1.));+#16460 = PCURVE('',#15120,#16461);+#16461 = DEFINITIONAL_REPRESENTATION('',(#16462),#16466);+#16462 = LINE('',#16463,#16464);+#16463 = CARTESIAN_POINT('',(0.,0.));+#16464 = VECTOR('',#16465,1.);+#16465 = DIRECTION('',(0.,-1.));+#16466 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16467 = PCURVE('',#15090,#16468);+#16468 = DEFINITIONAL_REPRESENTATION('',(#16469),#16473);+#16469 = LINE('',#16470,#16471);+#16470 = CARTESIAN_POINT('',(1.,0.));+#16471 = VECTOR('',#16472,1.);+#16472 = DIRECTION('',(0.,-1.));+#16473 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16474 = ORIENTED_EDGE('',*,*,#15104,.T.);+#16475 = ORIENTED_EDGE('',*,*,#16427,.F.);+#16476 = ADVANCED_FACE('',(#16477),#15090,.T.);+#16477 = FACE_BOUND('',#16478,.T.);+#16478 = EDGE_LOOP('',(#16479,#16480,#16481,#16482));+#16479 = ORIENTED_EDGE('',*,*,#15437,.T.);+#16480 = ORIENTED_EDGE('',*,*,#15382,.T.);+#16481 = ORIENTED_EDGE('',*,*,#15072,.T.);+#16482 = ORIENTED_EDGE('',*,*,#16454,.F.);+#16483 = ADVANCED_FACE('',(#16484),#3992,.T.);+#16484 = FACE_BOUND('',#16485,.T.);+#16485 = EDGE_LOOP('',(#16486,#16487,#16488,#16489));+#16486 = ORIENTED_EDGE('',*,*,#3966,.T.);+#16487 = ORIENTED_EDGE('',*,*,#14886,.T.);+#16488 = ORIENTED_EDGE('',*,*,#14957,.T.);+#16489 = ORIENTED_EDGE('',*,*,#16490,.F.);+#16490 = EDGE_CURVE('',#3922,#14958,#16491,.T.);+#16491 = SURFACE_CURVE('',#16492,(#16496,#16503),.PCURVE_S1.);+#16492 = LINE('',#16493,#16494);+#16493 = CARTESIAN_POINT('',(0.529784625806,-0.105713411882,1.8000001));+#16494 = VECTOR('',#16495,1.);+#16495 = DIRECTION('',(-0.,-0.,-1.));+#16496 = PCURVE('',#3992,#16497);+#16497 = DEFINITIONAL_REPRESENTATION('',(#16498),#16502);+#16498 = LINE('',#16499,#16500);+#16499 = CARTESIAN_POINT('',(1.,0.));+#16500 = VECTOR('',#16501,1.);+#16501 = DIRECTION('',(0.,-1.));+#16502 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16503 = PCURVE('',#3947,#16504);+#16504 = DEFINITIONAL_REPRESENTATION('',(#16505),#16509);+#16505 = LINE('',#16506,#16507);+#16506 = CARTESIAN_POINT('',(0.,0.));+#16507 = VECTOR('',#16508,1.);+#16508 = DIRECTION('',(0.,-1.));+#16509 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16510 = ADVANCED_FACE('',(#16511),#3947,.T.);+#16511 = FACE_BOUND('',#16512,.T.);+#16512 = EDGE_LOOP('',(#16513,#16514,#16515,#16516));+#16513 = ORIENTED_EDGE('',*,*,#3921,.T.);+#16514 = ORIENTED_EDGE('',*,*,#16490,.T.);+#16515 = ORIENTED_EDGE('',*,*,#14980,.T.);+#16516 = ORIENTED_EDGE('',*,*,#16517,.F.);+#16517 = EDGE_CURVE('',#3886,#14981,#16518,.T.);+#16518 = SURFACE_CURVE('',#16519,(#16523,#16530),.PCURVE_S1.);+#16519 = LINE('',#16520,#16521);+#16520 = CARTESIAN_POINT('',(0.47807386471,-7.763776319781E-02,1.8000001+ ));+#16521 = VECTOR('',#16522,1.);+#16522 = DIRECTION('',(-0.,-0.,-1.));+#16523 = PCURVE('',#3947,#16524);+#16524 = DEFINITIONAL_REPRESENTATION('',(#16525),#16529);+#16525 = LINE('',#16526,#16527);+#16526 = CARTESIAN_POINT('',(1.,0.));+#16527 = VECTOR('',#16528,1.);+#16528 = DIRECTION('',(0.,-1.));+#16529 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16530 = PCURVE('',#3905,#16531);+#16531 = DEFINITIONAL_REPRESENTATION('',(#16532),#16536);+#16532 = LINE('',#16533,#16534);+#16533 = CARTESIAN_POINT('',(0.,0.));+#16534 = VECTOR('',#16535,1.);+#16535 = DIRECTION('',(0.,-1.));+#16536 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16537 = ADVANCED_FACE('',(#16538),#3905,.T.);+#16538 = FACE_BOUND('',#16539,.T.);+#16539 = EDGE_LOOP('',(#16540,#16541,#16542,#16543));+#16540 = ORIENTED_EDGE('',*,*,#3885,.T.);+#16541 = ORIENTED_EDGE('',*,*,#16517,.T.);+#16542 = ORIENTED_EDGE('',*,*,#15003,.T.);+#16543 = ORIENTED_EDGE('',*,*,#16544,.F.);+#16544 = EDGE_CURVE('',#3850,#15004,#16545,.T.);+#16545 = SURFACE_CURVE('',#16546,(#16550,#16557),.PCURVE_S1.);+#16546 = LINE('',#16547,#16548);+#16547 = CARTESIAN_POINT('',(0.460598205835,5.156751799116E-03,1.8000001+ ));+#16548 = VECTOR('',#16549,1.);+#16549 = DIRECTION('',(-0.,-0.,-1.));+#16550 = PCURVE('',#3905,#16551);+#16551 = DEFINITIONAL_REPRESENTATION('',(#16552),#16556);+#16552 = LINE('',#16553,#16554);+#16553 = CARTESIAN_POINT('',(1.,0.));+#16554 = VECTOR('',#16555,1.);+#16555 = DIRECTION('',(0.,-1.));+#16556 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16557 = PCURVE('',#3869,#16558);+#16558 = DEFINITIONAL_REPRESENTATION('',(#16559),#16563);+#16559 = LINE('',#16560,#16561);+#16560 = CARTESIAN_POINT('',(0.,0.));+#16561 = VECTOR('',#16562,1.);+#16562 = DIRECTION('',(0.,-1.));+#16563 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16564 = ADVANCED_FACE('',(#16565),#3869,.T.);+#16565 = FACE_BOUND('',#16566,.T.);+#16566 = EDGE_LOOP('',(#16567,#16568,#16569,#16570));+#16567 = ORIENTED_EDGE('',*,*,#3849,.T.);+#16568 = ORIENTED_EDGE('',*,*,#16544,.T.);+#16569 = ORIENTED_EDGE('',*,*,#15026,.T.);+#16570 = ORIENTED_EDGE('',*,*,#16571,.F.);+#16571 = EDGE_CURVE('',#3805,#15027,#16572,.T.);+#16572 = SURFACE_CURVE('',#16573,(#16577,#16584),.PCURVE_S1.);+#16573 = LINE('',#16574,#16575);+#16574 = CARTESIAN_POINT('',(0.47807386471,8.809450990157E-02,1.8000001)+ );+#16575 = VECTOR('',#16576,1.);+#16576 = DIRECTION('',(-0.,-0.,-1.));+#16577 = PCURVE('',#3869,#16578);+#16578 = DEFINITIONAL_REPRESENTATION('',(#16579),#16583);+#16579 = LINE('',#16580,#16581);+#16580 = CARTESIAN_POINT('',(1.,0.));+#16581 = VECTOR('',#16582,1.);+#16582 = DIRECTION('',(0.,-1.));+#16583 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16584 = PCURVE('',#3830,#16585);+#16585 = DEFINITIONAL_REPRESENTATION('',(#16586),#16590);+#16586 = LINE('',#16587,#16588);+#16587 = CARTESIAN_POINT('',(0.,0.));+#16588 = VECTOR('',#16589,1.);+#16589 = DIRECTION('',(0.,-1.));+#16590 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16591 = ADVANCED_FACE('',(#16592),#3830,.T.);+#16592 = FACE_BOUND('',#16593,.T.);+#16593 = EDGE_LOOP('',(#16594,#16595,#16596,#16597));+#16594 = ORIENTED_EDGE('',*,*,#3804,.T.);+#16595 = ORIENTED_EDGE('',*,*,#16571,.T.);+#16596 = ORIENTED_EDGE('',*,*,#15049,.T.);+#16597 = ORIENTED_EDGE('',*,*,#16598,.F.);+#16598 = EDGE_CURVE('',#3760,#14911,#16599,.T.);+#16599 = SURFACE_CURVE('',#16600,(#16604,#16611),.PCURVE_S1.);+#16600 = LINE('',#16601,#16602);+#16601 = CARTESIAN_POINT('',(0.529784625806,0.116170158586,1.8000001));+#16602 = VECTOR('',#16603,1.);+#16603 = DIRECTION('',(-0.,-0.,-1.));+#16604 = PCURVE('',#3830,#16605);+#16605 = DEFINITIONAL_REPRESENTATION('',(#16606),#16610);+#16606 = LINE('',#16607,#16608);+#16607 = CARTESIAN_POINT('',(1.,0.));+#16608 = VECTOR('',#16609,1.);+#16609 = DIRECTION('',(0.,-1.));+#16610 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16611 = PCURVE('',#3785,#16612);+#16612 = DEFINITIONAL_REPRESENTATION('',(#16613),#16617);+#16613 = LINE('',#16614,#16615);+#16614 = CARTESIAN_POINT('',(0.,0.));+#16615 = VECTOR('',#16616,1.);+#16616 = DIRECTION('',(0.,-1.));+#16617 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16618 = ADVANCED_FACE('',(#16619),#3785,.T.);+#16619 = FACE_BOUND('',#16620,.T.);+#16620 = EDGE_LOOP('',(#16621,#16622,#16623,#16624));+#16621 = ORIENTED_EDGE('',*,*,#3759,.T.);+#16622 = ORIENTED_EDGE('',*,*,#16598,.T.);+#16623 = ORIENTED_EDGE('',*,*,#14910,.T.);+#16624 = ORIENTED_EDGE('',*,*,#16625,.F.);+#16625 = EDGE_CURVE('',#3724,#14913,#16626,.T.);+#16626 = SURFACE_CURVE('',#16627,(#16631,#16638),.PCURVE_S1.);+#16627 = LINE('',#16628,#16629);+#16628 = CARTESIAN_POINT('',(0.581567008456,8.809450990157E-02,1.8000001+ ));+#16629 = VECTOR('',#16630,1.);+#16630 = DIRECTION('',(-0.,-0.,-1.));+#16631 = PCURVE('',#3785,#16632);+#16632 = DEFINITIONAL_REPRESENTATION('',(#16633),#16637);+#16633 = LINE('',#16634,#16635);+#16634 = CARTESIAN_POINT('',(1.,0.));+#16635 = VECTOR('',#16636,1.);+#16636 = DIRECTION('',(0.,-1.));+#16637 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16638 = PCURVE('',#3743,#16639);+#16639 = DEFINITIONAL_REPRESENTATION('',(#16640),#16644);+#16640 = LINE('',#16641,#16642);+#16641 = CARTESIAN_POINT('',(0.,0.));+#16642 = VECTOR('',#16643,1.);+#16643 = DIRECTION('',(0.,-1.));+#16644 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16645 = ADVANCED_FACE('',(#16646),#3743,.T.);+#16646 = FACE_BOUND('',#16647,.T.);+#16647 = EDGE_LOOP('',(#16648,#16649,#16650,#16651));+#16648 = ORIENTED_EDGE('',*,*,#3721,.T.);+#16649 = ORIENTED_EDGE('',*,*,#16625,.T.);+#16650 = ORIENTED_EDGE('',*,*,#14935,.T.);+#16651 = ORIENTED_EDGE('',*,*,#14835,.F.);+#16652 = ADVANCED_FACE('',(#16653),#3708,.T.);+#16653 = FACE_BOUND('',#16654,.T.);+#16654 = EDGE_LOOP('',(#16655,#16656,#16679,#16707));+#16655 = ORIENTED_EDGE('',*,*,#3694,.T.);+#16656 = ORIENTED_EDGE('',*,*,#16657,.T.);+#16657 = EDGE_CURVE('',#2955,#16658,#16660,.T.);+#16658 = VERTEX_POINT('',#16659);+#16659 = CARTESIAN_POINT('',(0.756108732545,0.112302594736,1.7000001));+#16660 = SURFACE_CURVE('',#16661,(#16665,#16672),.PCURVE_S1.);+#16661 = LINE('',#16662,#16663);+#16662 = CARTESIAN_POINT('',(0.756108732545,0.112302594736,1.8000001));+#16663 = VECTOR('',#16664,1.);+#16664 = DIRECTION('',(-0.,-0.,-1.));+#16665 = PCURVE('',#3708,#16666);+#16666 = DEFINITIONAL_REPRESENTATION('',(#16667),#16671);+#16667 = LINE('',#16668,#16669);+#16668 = CARTESIAN_POINT('',(0.,0.));+#16669 = VECTOR('',#16670,1.);+#16670 = DIRECTION('',(0.,-1.));+#16671 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16672 = PCURVE('',#2972,#16673);+#16673 = DEFINITIONAL_REPRESENTATION('',(#16674),#16678);+#16674 = LINE('',#16675,#16676);+#16675 = CARTESIAN_POINT('',(0.108291787781,0.));+#16676 = VECTOR('',#16677,1.);+#16677 = DIRECTION('',(0.,-1.));+#16678 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16679 = ORIENTED_EDGE('',*,*,#16680,.T.);+#16680 = EDGE_CURVE('',#16658,#16681,#16683,.T.);+#16681 = VERTEX_POINT('',#16682);+#16682 = CARTESIAN_POINT('',(0.756108732545,8.795126679604E-02,1.7000001+ ));+#16683 = SURFACE_CURVE('',#16684,(#16688,#16695),.PCURVE_S1.);+#16684 = LINE('',#16685,#16686);+#16685 = CARTESIAN_POINT('',(0.756108732545,0.112302594736,1.7000001));+#16686 = VECTOR('',#16687,1.);+#16687 = DIRECTION('',(0.,-1.,0.));+#16688 = PCURVE('',#3708,#16689);+#16689 = DEFINITIONAL_REPRESENTATION('',(#16690),#16694);+#16690 = LINE('',#16691,#16692);+#16691 = CARTESIAN_POINT('',(0.,-0.1));+#16692 = VECTOR('',#16693,1.);+#16693 = DIRECTION('',(1.,0.));+#16694 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16695 = PCURVE('',#16696,#16701);+#16696 = PLANE('',#16697);+#16697 = AXIS2_PLACEMENT_3D('',#16698,#16699,#16700);+#16698 = CARTESIAN_POINT('',(0.618165621919,-0.101559361821,1.7000001));+#16699 = DIRECTION('',(0.,0.,1.));+#16700 = DIRECTION('',(1.,0.,0.));+#16701 = DEFINITIONAL_REPRESENTATION('',(#16702),#16706);+#16702 = LINE('',#16703,#16704);+#16703 = CARTESIAN_POINT('',(0.137943110626,0.213861956558));+#16704 = VECTOR('',#16705,1.);+#16705 = DIRECTION('',(0.,-1.));+#16706 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16707 = ORIENTED_EDGE('',*,*,#16708,.F.);+#16708 = EDGE_CURVE('',#3668,#16681,#16709,.T.);+#16709 = SURFACE_CURVE('',#16710,(#16714,#16721),.PCURVE_S1.);+#16710 = LINE('',#16711,#16712);+#16711 = CARTESIAN_POINT('',(0.756108732545,8.795126679604E-02,1.8000001+ ));+#16712 = VECTOR('',#16713,1.);+#16713 = DIRECTION('',(-0.,-0.,-1.));+#16714 = PCURVE('',#3708,#16715);+#16715 = DEFINITIONAL_REPRESENTATION('',(#16716),#16720);+#16716 = LINE('',#16717,#16718);+#16717 = CARTESIAN_POINT('',(2.435132794027E-02,0.));+#16718 = VECTOR('',#16719,1.);+#16719 = DIRECTION('',(0.,-1.));+#16720 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16721 = PCURVE('',#3683,#16722);+#16722 = DEFINITIONAL_REPRESENTATION('',(#16723),#16727);+#16723 = LINE('',#16724,#16725);+#16724 = CARTESIAN_POINT('',(0.,0.));+#16725 = VECTOR('',#16726,1.);+#16726 = DIRECTION('',(0.,-1.));+#16727 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16728 = ADVANCED_FACE('',(#16729),#16696,.T.);+#16729 = FACE_BOUND('',#16730,.F.);+#16730 = EDGE_LOOP('',(#16731,#16756,#16777,#16778,#16801,#16824,#16847,+ #16870,#16893,#16916,#16939,#16962,#16985,#17008,#17031,#17054,+ #17077,#17100,#17123,#17146,#17169,#17192));+#16731 = ORIENTED_EDGE('',*,*,#16732,.T.);+#16732 = EDGE_CURVE('',#16733,#16735,#16737,.T.);+#16733 = VERTEX_POINT('',#16734);+#16734 = CARTESIAN_POINT('',(0.647816944764,4.870265588054E-03,1.7000001+ ));+#16735 = VERTEX_POINT('',#16736);+#16736 = CARTESIAN_POINT('',(0.647816944764,0.112302594736,1.7000001));+#16737 = SURFACE_CURVE('',#16738,(#16742,#16749),.PCURVE_S1.);+#16738 = LINE('',#16739,#16740);+#16739 = CARTESIAN_POINT('',(0.647816944764,4.870265588054E-03,1.7000001+ ));+#16740 = VECTOR('',#16741,1.);+#16741 = DIRECTION('',(0.,1.,0.));+#16742 = PCURVE('',#16696,#16743);+#16743 = DEFINITIONAL_REPRESENTATION('',(#16744),#16748);+#16744 = LINE('',#16745,#16746);+#16745 = CARTESIAN_POINT('',(2.965132284492E-02,0.10642962741));+#16746 = VECTOR('',#16747,1.);+#16747 = DIRECTION('',(0.,1.));+#16748 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16749 = PCURVE('',#2999,#16750);+#16750 = DEFINITIONAL_REPRESENTATION('',(#16751),#16755);+#16751 = LINE('',#16752,#16753);+#16752 = CARTESIAN_POINT('',(0.,-0.1));+#16753 = VECTOR('',#16754,1.);+#16754 = DIRECTION('',(1.,0.));+#16755 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16756 = ORIENTED_EDGE('',*,*,#16757,.T.);+#16757 = EDGE_CURVE('',#16735,#16658,#16758,.T.);+#16758 = SURFACE_CURVE('',#16759,(#16763,#16770),.PCURVE_S1.);+#16759 = LINE('',#16760,#16761);+#16760 = CARTESIAN_POINT('',(0.647816944764,0.112302594736,1.7000001));+#16761 = VECTOR('',#16762,1.);+#16762 = DIRECTION('',(1.,0.,0.));+#16763 = PCURVE('',#16696,#16764);+#16764 = DEFINITIONAL_REPRESENTATION('',(#16765),#16769);+#16765 = LINE('',#16766,#16767);+#16766 = CARTESIAN_POINT('',(2.965132284492E-02,0.213861956558));+#16767 = VECTOR('',#16768,1.);+#16768 = DIRECTION('',(1.,0.));+#16769 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16770 = PCURVE('',#2972,#16771);+#16771 = DEFINITIONAL_REPRESENTATION('',(#16772),#16776);+#16772 = LINE('',#16773,#16774);+#16773 = CARTESIAN_POINT('',(0.,-0.1));+#16774 = VECTOR('',#16775,1.);+#16775 = DIRECTION('',(1.,0.));+#16776 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16777 = ORIENTED_EDGE('',*,*,#16680,.T.);+#16778 = ORIENTED_EDGE('',*,*,#16779,.T.);+#16779 = EDGE_CURVE('',#16681,#16780,#16782,.T.);+#16780 = VERTEX_POINT('',#16781);+#16781 = CARTESIAN_POINT('',(0.674173676182,8.795126679604E-02,1.7000001+ ));+#16782 = SURFACE_CURVE('',#16783,(#16787,#16794),.PCURVE_S1.);+#16783 = LINE('',#16784,#16785);+#16784 = CARTESIAN_POINT('',(0.756108732545,8.795126679604E-02,1.7000001+ ));+#16785 = VECTOR('',#16786,1.);+#16786 = DIRECTION('',(-1.,0.,0.));+#16787 = PCURVE('',#16696,#16788);+#16788 = DEFINITIONAL_REPRESENTATION('',(#16789),#16793);+#16789 = LINE('',#16790,#16791);+#16790 = CARTESIAN_POINT('',(0.137943110626,0.189510628618));+#16791 = VECTOR('',#16792,1.);+#16792 = DIRECTION('',(-1.,0.));+#16793 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16794 = PCURVE('',#3683,#16795);+#16795 = DEFINITIONAL_REPRESENTATION('',(#16796),#16800);+#16796 = LINE('',#16797,#16798);+#16797 = CARTESIAN_POINT('',(0.,-0.1));+#16798 = VECTOR('',#16799,1.);+#16799 = DIRECTION('',(1.,0.));+#16800 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16801 = ORIENTED_EDGE('',*,*,#16802,.T.);+#16802 = EDGE_CURVE('',#16780,#16803,#16805,.T.);+#16803 = VERTEX_POINT('',#16804);+#16804 = CARTESIAN_POINT('',(0.674173676182,3.538104706616E-02,1.7000001+ ));+#16805 = SURFACE_CURVE('',#16806,(#16810,#16817),.PCURVE_S1.);+#16806 = LINE('',#16807,#16808);+#16807 = CARTESIAN_POINT('',(0.674173676182,8.795126679604E-02,1.7000001+ ));+#16808 = VECTOR('',#16809,1.);+#16809 = DIRECTION('',(0.,-1.,0.));+#16810 = PCURVE('',#16696,#16811);+#16811 = DEFINITIONAL_REPRESENTATION('',(#16812),#16816);+#16812 = LINE('',#16813,#16814);+#16813 = CARTESIAN_POINT('',(5.600805426262E-02,0.189510628618));+#16814 = VECTOR('',#16815,1.);+#16815 = DIRECTION('',(0.,-1.));+#16816 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16817 = PCURVE('',#3656,#16818);+#16818 = DEFINITIONAL_REPRESENTATION('',(#16819),#16823);+#16819 = LINE('',#16820,#16821);+#16820 = CARTESIAN_POINT('',(0.,-0.1));+#16821 = VECTOR('',#16822,1.);+#16822 = DIRECTION('',(1.,0.));+#16823 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16824 = ORIENTED_EDGE('',*,*,#16825,.T.);+#16825 = EDGE_CURVE('',#16803,#16826,#16828,.T.);+#16826 = VERTEX_POINT('',#16827);+#16827 = CARTESIAN_POINT('',(0.68656420481,3.874726004614E-02,1.7000001)+ );+#16828 = SURFACE_CURVE('',#16829,(#16833,#16840),.PCURVE_S1.);+#16829 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#16830,#16831,#16832),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#16830 = CARTESIAN_POINT('',(0.674173676182,3.538104706616E-02,1.7000001+ ));+#16831 = CARTESIAN_POINT('',(0.68033312972,3.767293675465E-02,1.7000001)+ );+#16832 = CARTESIAN_POINT('',(0.68656420481,3.874726004614E-02,1.7000001)+ );+#16833 = PCURVE('',#16696,#16834);+#16834 = DEFINITIONAL_REPRESENTATION('',(#16835),#16839);+#16835 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#16836,#16837,#16838),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#16836 = CARTESIAN_POINT('',(5.600805426262E-02,0.136940408888));+#16837 = CARTESIAN_POINT('',(6.216750780046E-02,0.139232298576));+#16838 = CARTESIAN_POINT('',(6.839858289106E-02,0.140306621868));+#16839 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16840 = PCURVE('',#3624,#16841);+#16841 = DEFINITIONAL_REPRESENTATION('',(#16842),#16846);+#16842 = LINE('',#16843,#16844);+#16843 = CARTESIAN_POINT('',(0.,-0.1));+#16844 = VECTOR('',#16845,1.);+#16845 = DIRECTION('',(1.,0.));+#16846 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16847 = ORIENTED_EDGE('',*,*,#16848,.T.);+#16848 = EDGE_CURVE('',#16826,#16849,#16851,.T.);+#16849 = VERTEX_POINT('',#16850);+#16850 = CARTESIAN_POINT('',(0.699097976544,3.982158333762E-02,1.7000001+ ));+#16851 = SURFACE_CURVE('',#16852,(#16856,#16863),.PCURVE_S1.);+#16852 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#16853,#16854,#16855),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#16853 = CARTESIAN_POINT('',(0.68656420481,3.874726004614E-02,1.7000001)+ );+#16854 = CARTESIAN_POINT('',(0.692795279901,3.982158333762E-02,1.7000001+ ));+#16855 = CARTESIAN_POINT('',(0.699097976544,3.982158333762E-02,1.7000001+ ));+#16856 = PCURVE('',#16696,#16857);+#16857 = DEFINITIONAL_REPRESENTATION('',(#16858),#16862);+#16858 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#16859,#16860,#16861),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#16859 = CARTESIAN_POINT('',(6.839858289106E-02,0.140306621868));+#16860 = CARTESIAN_POINT('',(7.462965798165E-02,0.141380945159));+#16861 = CARTESIAN_POINT('',(8.093235462502E-02,0.141380945159));+#16862 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16863 = PCURVE('',#3588,#16864);+#16864 = DEFINITIONAL_REPRESENTATION('',(#16865),#16869);+#16865 = LINE('',#16866,#16867);+#16866 = CARTESIAN_POINT('',(0.,-0.1));+#16867 = VECTOR('',#16868,1.);+#16868 = DIRECTION('',(1.,0.));+#16869 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16870 = ORIENTED_EDGE('',*,*,#16871,.T.);+#16871 = EDGE_CURVE('',#16849,#16872,#16874,.T.);+#16872 = VERTEX_POINT('',#16873);+#16873 = CARTESIAN_POINT('',(0.751811439379,2.019727787987E-02,1.7000001+ ));+#16874 = SURFACE_CURVE('',#16875,(#16879,#16886),.PCURVE_S1.);+#16875 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#16876,#16877,#16878),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#16876 = CARTESIAN_POINT('',(0.699097976544,3.982158333762E-02,1.7000001+ ));+#16877 = CARTESIAN_POINT('',(0.732330377027,3.982158333762E-02,1.7000001+ ));+#16878 = CARTESIAN_POINT('',(0.751811439379,2.019727787987E-02,1.7000001+ ));+#16879 = PCURVE('',#16696,#16880);+#16880 = DEFINITIONAL_REPRESENTATION('',(#16881),#16885);+#16881 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#16882,#16883,#16884),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#16882 = CARTESIAN_POINT('',(8.093235462502E-02,0.141380945159));+#16883 = CARTESIAN_POINT('',(0.114164755108,0.141380945159));+#16884 = CARTESIAN_POINT('',(0.13364581746,0.121756639701));+#16885 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16886 = PCURVE('',#3549,#16887);+#16887 = DEFINITIONAL_REPRESENTATION('',(#16888),#16892);+#16888 = LINE('',#16889,#16890);+#16889 = CARTESIAN_POINT('',(0.,-0.1));+#16890 = VECTOR('',#16891,1.);+#16891 = DIRECTION('',(1.,0.));+#16892 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16893 = ORIENTED_EDGE('',*,*,#16894,.T.);+#16894 = EDGE_CURVE('',#16872,#16895,#16897,.T.);+#16895 = VERTEX_POINT('',#16896);+#16896 = CARTESIAN_POINT('',(0.771292501732,-3.294591427213E-02,+ 1.7000001));+#16897 = SURFACE_CURVE('',#16898,(#16902,#16909),.PCURVE_S1.);+#16898 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#16899,#16900,#16901),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#16899 = CARTESIAN_POINT('',(0.751811439379,2.019727787987E-02,1.7000001+ ));+#16900 = CARTESIAN_POINT('',(0.771292501732,5.72972422124E-04,1.7000001)+ );+#16901 = CARTESIAN_POINT('',(0.771292501732,-3.294591427213E-02,+ 1.7000001));+#16902 = PCURVE('',#16696,#16903);+#16903 = DEFINITIONAL_REPRESENTATION('',(#16904),#16908);+#16904 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#16905,#16906,#16907),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#16905 = CARTESIAN_POINT('',(0.13364581746,0.121756639701));+#16906 = CARTESIAN_POINT('',(0.153126879813,0.102132334244));+#16907 = CARTESIAN_POINT('',(0.153126879813,6.861344754935E-02));+#16908 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16909 = PCURVE('',#3507,#16910);+#16910 = DEFINITIONAL_REPRESENTATION('',(#16911),#16915);+#16911 = LINE('',#16912,#16913);+#16912 = CARTESIAN_POINT('',(0.,-0.1));+#16913 = VECTOR('',#16914,1.);+#16914 = DIRECTION('',(1.,0.));+#16915 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16916 = ORIENTED_EDGE('',*,*,#16917,.T.);+#16917 = EDGE_CURVE('',#16895,#16918,#16920,.T.);+#16918 = VERTEX_POINT('',#16919);+#16919 = CARTESIAN_POINT('',(0.750880359194,-8.623234952967E-02,+ 1.7000001));+#16920 = SURFACE_CURVE('',#16921,(#16925,#16932),.PCURVE_S1.);+#16921 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#16922,#16923,#16924),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#16922 = CARTESIAN_POINT('',(0.771292501732,-3.294591427213E-02,+ 1.7000001));+#16923 = CARTESIAN_POINT('',(0.771292501732,-6.675128717745E-02,+ 1.7000001));+#16924 = CARTESIAN_POINT('',(0.750880359194,-8.623234952967E-02,+ 1.7000001));+#16925 = PCURVE('',#16696,#16926);+#16926 = DEFINITIONAL_REPRESENTATION('',(#16927),#16931);+#16927 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#16928,#16929,#16930),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#16928 = CARTESIAN_POINT('',(0.153126879813,6.861344754935E-02));+#16929 = CARTESIAN_POINT('',(0.153126879813,3.480807464403E-02));+#16930 = CARTESIAN_POINT('',(0.132714737274,1.532701229182E-02));+#16931 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16932 = PCURVE('',#3468,#16933);+#16933 = DEFINITIONAL_REPRESENTATION('',(#16934),#16938);+#16934 = LINE('',#16935,#16936);+#16935 = CARTESIAN_POINT('',(0.,-0.1));+#16936 = VECTOR('',#16937,1.);+#16937 = DIRECTION('',(1.,0.));+#16938 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16939 = ORIENTED_EDGE('',*,*,#16940,.T.);+#16940 = EDGE_CURVE('',#16918,#16941,#16943,.T.);+#16941 = VERTEX_POINT('',#16942);+#16942 = CARTESIAN_POINT('',(0.695087169589,-0.105713411882,1.7000001));+#16943 = SURFACE_CURVE('',#16944,(#16948,#16955),.PCURVE_S1.);+#16944 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#16945,#16946,#16947),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#16945 = CARTESIAN_POINT('',(0.750880359194,-8.623234952967E-02,+ 1.7000001));+#16946 = CARTESIAN_POINT('',(0.730468216655,-0.105713411882,1.7000001));+#16947 = CARTESIAN_POINT('',(0.695087169589,-0.105713411882,1.7000001));+#16948 = PCURVE('',#16696,#16949);+#16949 = DEFINITIONAL_REPRESENTATION('',(#16950),#16954);+#16950 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#16951,#16952,#16953),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#16951 = CARTESIAN_POINT('',(0.132714737274,1.532701229182E-02));+#16952 = CARTESIAN_POINT('',(0.112302594736,-4.154050060399E-03));+#16953 = CARTESIAN_POINT('',(7.692154767015E-02,-4.154050060399E-03));+#16954 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16955 = PCURVE('',#3426,#16956);+#16956 = DEFINITIONAL_REPRESENTATION('',(#16957),#16961);+#16957 = LINE('',#16958,#16959);+#16958 = CARTESIAN_POINT('',(0.,-0.1));+#16959 = VECTOR('',#16960,1.);+#16960 = DIRECTION('',(1.,0.));+#16961 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16962 = ORIENTED_EDGE('',*,*,#16963,.T.);+#16963 = EDGE_CURVE('',#16941,#16964,#16966,.T.);+#16964 = VERTEX_POINT('',#16965);+#16965 = CARTESIAN_POINT('',(0.663931794136,-0.103421522193,1.7000001));+#16966 = SURFACE_CURVE('',#16967,(#16971,#16978),.PCURVE_S1.);+#16967 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#16968,#16969,#16970),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#16968 = CARTESIAN_POINT('',(0.695087169589,-0.105713411882,1.7000001));+#16969 = CARTESIAN_POINT('',(0.678041240031,-0.105713411882,1.7000001));+#16970 = CARTESIAN_POINT('',(0.663931794136,-0.103421522193,1.7000001));+#16971 = PCURVE('',#16696,#16972);+#16972 = DEFINITIONAL_REPRESENTATION('',(#16973),#16977);+#16973 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#16974,#16975,#16976),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#16974 = CARTESIAN_POINT('',(7.692154767015E-02,-4.154050060399E-03));+#16975 = CARTESIAN_POINT('',(5.987561811196E-02,-4.154050060399E-03));+#16976 = CARTESIAN_POINT('',(4.576617221716E-02,-1.862160371903E-03));+#16977 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16978 = PCURVE('',#3390,#16979);+#16979 = DEFINITIONAL_REPRESENTATION('',(#16980),#16984);+#16980 = LINE('',#16981,#16982);+#16981 = CARTESIAN_POINT('',(0.,-0.1));+#16982 = VECTOR('',#16983,1.);+#16983 = DIRECTION('',(1.,0.));+#16984 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16985 = ORIENTED_EDGE('',*,*,#16986,.T.);+#16986 = EDGE_CURVE('',#16964,#16987,#16989,.T.);+#16987 = VERTEX_POINT('',#16988);+#16988 = CARTESIAN_POINT('',(0.63864938601,-9.65458531279E-02,1.7000001)+ );+#16989 = SURFACE_CURVE('',#16990,(#16994,#17001),.PCURVE_S1.);+#16990 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#16991,#16992,#16993),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#16991 = CARTESIAN_POINT('',(0.663931794136,-0.103421522193,1.7000001));+#16992 = CARTESIAN_POINT('',(0.649822348241,-0.101129632505,1.7000001));+#16993 = CARTESIAN_POINT('',(0.63864938601,-9.65458531279E-02,1.7000001)+ );+#16994 = PCURVE('',#16696,#16995);+#16995 = DEFINITIONAL_REPRESENTATION('',(#16996),#17000);+#16996 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#16997,#16998,#16999),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#16997 = CARTESIAN_POINT('',(4.576617221716E-02,-1.862160371903E-03));+#16998 = CARTESIAN_POINT('',(3.165672632235E-02,4.29729316593E-04));+#16999 = CARTESIAN_POINT('',(2.048376409093E-02,5.013508693585E-03));+#17000 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17001 = PCURVE('',#3354,#17002);+#17002 = DEFINITIONAL_REPRESENTATION('',(#17003),#17007);+#17003 = LINE('',#17004,#17005);+#17004 = CARTESIAN_POINT('',(0.,-0.1));+#17005 = VECTOR('',#17006,1.);+#17006 = DIRECTION('',(1.,0.));+#17007 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17008 = ORIENTED_EDGE('',*,*,#17009,.T.);+#17009 = EDGE_CURVE('',#16987,#17010,#17012,.T.);+#17010 = VERTEX_POINT('',#17011);+#17011 = CARTESIAN_POINT('',(0.63864938601,-6.718101649404E-02,1.7000001+ ));+#17012 = SURFACE_CURVE('',#17013,(#17017,#17024),.PCURVE_S1.);+#17013 = LINE('',#17014,#17015);+#17014 = CARTESIAN_POINT('',(0.63864938601,-9.65458531279E-02,1.7000001)+ );+#17015 = VECTOR('',#17016,1.);+#17016 = DIRECTION('',(0.,1.,0.));+#17017 = PCURVE('',#16696,#17018);+#17018 = DEFINITIONAL_REPRESENTATION('',(#17019),#17023);+#17019 = LINE('',#17020,#17021);+#17020 = CARTESIAN_POINT('',(2.048376409093E-02,5.013508693585E-03));+#17021 = VECTOR('',#17022,1.);+#17022 = DIRECTION('',(0.,1.));+#17023 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17024 = PCURVE('',#3323,#17025);+#17025 = DEFINITIONAL_REPRESENTATION('',(#17026),#17030);+#17026 = LINE('',#17027,#17028);+#17027 = CARTESIAN_POINT('',(0.,-0.1));+#17028 = VECTOR('',#17029,1.);+#17029 = DIRECTION('',(1.,0.));+#17030 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17031 = ORIENTED_EDGE('',*,*,#17032,.T.);+#17032 = EDGE_CURVE('',#17010,#17033,#17035,.T.);+#17033 = VERTEX_POINT('',#17034);+#17034 = CARTESIAN_POINT('',(0.665149360533,-7.78526278561E-02,1.7000001+ ));+#17035 = SURFACE_CURVE('',#17036,(#17040,#17047),.PCURVE_S1.);+#17036 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#17037,#17038,#17039),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#17037 = CARTESIAN_POINT('',(0.63864938601,-6.718101649404E-02,1.7000001+ ));+#17038 = CARTESIAN_POINT('',(0.651827751719,-7.434317177059E-02,+ 1.7000001));+#17039 = CARTESIAN_POINT('',(0.665149360533,-7.78526278561E-02,1.7000001+ ));+#17040 = PCURVE('',#16696,#17041);+#17041 = DEFINITIONAL_REPRESENTATION('',(#17042),#17046);+#17042 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#17043,#17044,#17045),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#17043 = CARTESIAN_POINT('',(2.048376409093E-02,3.437834532744E-02));+#17044 = CARTESIAN_POINT('',(3.366212979979E-02,2.721619005089E-02));+#17045 = CARTESIAN_POINT('',(4.698373861417E-02,2.370673396538E-02));+#17046 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17047 = PCURVE('',#3291,#17048);+#17048 = DEFINITIONAL_REPRESENTATION('',(#17049),#17053);+#17049 = LINE('',#17050,#17051);+#17050 = CARTESIAN_POINT('',(0.,-0.1));+#17051 = VECTOR('',#17052,1.);+#17052 = DIRECTION('',(1.,0.));+#17053 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17054 = ORIENTED_EDGE('',*,*,#17055,.T.);+#17055 = EDGE_CURVE('',#17033,#17056,#17058,.T.);+#17056 = VERTEX_POINT('',#17057);+#17057 = CARTESIAN_POINT('',(0.692365550584,-8.136208394161E-02,+ 1.7000001));+#17058 = SURFACE_CURVE('',#17059,(#17063,#17070),.PCURVE_S1.);+#17059 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#17060,#17061,#17062),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#17060 = CARTESIAN_POINT('',(0.665149360533,-7.78526278561E-02,1.7000001+ ));+#17061 = CARTESIAN_POINT('',(0.678470969348,-8.136208394161E-02,+ 1.7000001));+#17062 = CARTESIAN_POINT('',(0.692365550584,-8.136208394161E-02,+ 1.7000001));+#17063 = PCURVE('',#16696,#17064);+#17064 = DEFINITIONAL_REPRESENTATION('',(#17065),#17069);+#17065 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#17066,#17067,#17068),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#17066 = CARTESIAN_POINT('',(4.698373861417E-02,2.370673396538E-02));+#17067 = CARTESIAN_POINT('',(6.030534742855E-02,2.019727787987E-02));+#17068 = CARTESIAN_POINT('',(7.419992866506E-02,2.019727787987E-02));+#17069 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17070 = PCURVE('',#3255,#17071);+#17071 = DEFINITIONAL_REPRESENTATION('',(#17072),#17076);+#17072 = LINE('',#17073,#17074);+#17073 = CARTESIAN_POINT('',(0.,-0.1));+#17074 = VECTOR('',#17075,1.);+#17075 = DIRECTION('',(1.,0.));+#17076 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17077 = ORIENTED_EDGE('',*,*,#17078,.T.);+#17078 = EDGE_CURVE('',#17056,#17079,#17081,.T.);+#17079 = VERTEX_POINT('',#17080);+#17080 = CARTESIAN_POINT('',(0.729250650258,-6.875669065488E-02,+ 1.7000001));+#17081 = SURFACE_CURVE('',#17082,(#17086,#17093),.PCURVE_S1.);+#17082 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#17083,#17084,#17085),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#17083 = CARTESIAN_POINT('',(0.692365550584,-8.136208394161E-02,+ 1.7000001));+#17084 = CARTESIAN_POINT('',(0.716287149208,-8.136208394161E-02,+ 1.7000001));+#17085 = CARTESIAN_POINT('',(0.729250650258,-6.875669065488E-02,+ 1.7000001));+#17086 = PCURVE('',#16696,#17087);+#17087 = DEFINITIONAL_REPRESENTATION('',(#17088),#17092);+#17088 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#17089,#17090,#17091),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#17089 = CARTESIAN_POINT('',(7.419992866506E-02,2.019727787987E-02));+#17090 = CARTESIAN_POINT('',(9.812152728874E-02,2.019727787987E-02));+#17091 = CARTESIAN_POINT('',(0.111085028339,3.28026711666E-02));+#17092 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17093 = PCURVE('',#3219,#17094);+#17094 = DEFINITIONAL_REPRESENTATION('',(#17095),#17099);+#17095 = LINE('',#17096,#17097);+#17096 = CARTESIAN_POINT('',(0.,-0.1));+#17097 = VECTOR('',#17098,1.);+#17098 = DIRECTION('',(1.,0.));+#17099 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17100 = ORIENTED_EDGE('',*,*,#17101,.T.);+#17101 = EDGE_CURVE('',#17079,#17102,#17104,.T.);+#17102 = VERTEX_POINT('',#17103);+#17103 = CARTESIAN_POINT('',(0.742214151309,-3.294591427213E-02,+ 1.7000001));+#17104 = SURFACE_CURVE('',#17105,(#17109,#17116),.PCURVE_S1.);+#17105 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#17106,#17107,#17108),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#17106 = CARTESIAN_POINT('',(0.729250650258,-6.875669065488E-02,+ 1.7000001));+#17107 = CARTESIAN_POINT('',(0.742214151309,-5.615129736815E-02,+ 1.7000001));+#17108 = CARTESIAN_POINT('',(0.742214151309,-3.294591427213E-02,+ 1.7000001));+#17109 = PCURVE('',#16696,#17110);+#17110 = DEFINITIONAL_REPRESENTATION('',(#17111),#17115);+#17111 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#17112,#17113,#17114),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#17112 = CARTESIAN_POINT('',(0.111085028339,3.28026711666E-02));+#17113 = CARTESIAN_POINT('',(0.12404852939,4.540806445333E-02));+#17114 = CARTESIAN_POINT('',(0.12404852939,6.861344754935E-02));+#17115 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17116 = PCURVE('',#3183,#17117);+#17117 = DEFINITIONAL_REPRESENTATION('',(#17118),#17122);+#17118 = LINE('',#17119,#17120);+#17119 = CARTESIAN_POINT('',(0.,-0.1));+#17120 = VECTOR('',#17121,1.);+#17121 = DIRECTION('',(1.,0.));+#17122 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17123 = ORIENTED_EDGE('',*,*,#17124,.T.);+#17124 = EDGE_CURVE('',#17102,#17125,#17127,.T.);+#17125 = VERTEX_POINT('',#17126);+#17126 = CARTESIAN_POINT('',(0.728820920942,2.721619005089E-03,1.7000001+ ));+#17127 = SURFACE_CURVE('',#17128,(#17132,#17139),.PCURVE_S1.);+#17128 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#17129,#17130,#17131),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#17129 = CARTESIAN_POINT('',(0.742214151309,-3.294591427213E-02,+ 1.7000001));+#17130 = CARTESIAN_POINT('',(0.742214151309,-1.002701738717E-02,+ 1.7000001));+#17131 = CARTESIAN_POINT('',(0.728820920942,2.721619005089E-03,1.7000001+ ));+#17132 = PCURVE('',#16696,#17133);+#17133 = DEFINITIONAL_REPRESENTATION('',(#17134),#17138);+#17134 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#17135,#17136,#17137),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#17135 = CARTESIAN_POINT('',(0.12404852939,6.861344754935E-02));+#17136 = CARTESIAN_POINT('',(0.12404852939,9.153234443431E-02));+#17137 = CARTESIAN_POINT('',(0.110655299023,0.104280980827));+#17138 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17139 = PCURVE('',#3144,#17140);+#17140 = DEFINITIONAL_REPRESENTATION('',(#17141),#17145);+#17141 = LINE('',#17142,#17143);+#17142 = CARTESIAN_POINT('',(0.,-0.1));+#17143 = VECTOR('',#17144,1.);+#17144 = DIRECTION('',(1.,0.));+#17145 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17146 = ORIENTED_EDGE('',*,*,#17147,.T.);+#17147 = EDGE_CURVE('',#17125,#17148,#17150,.T.);+#17148 = VERTEX_POINT('',#17149);+#17149 = CARTESIAN_POINT('',(0.691506091951,1.547025539735E-02,1.7000001+ ));+#17150 = SURFACE_CURVE('',#17151,(#17155,#17162),.PCURVE_S1.);+#17151 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#17152,#17153,#17154),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#17152 = CARTESIAN_POINT('',(0.728820920942,2.721619005089E-03,1.7000001+ ));+#17153 = CARTESIAN_POINT('',(0.715427690575,1.547025539735E-02,1.7000001+ ));+#17154 = CARTESIAN_POINT('',(0.691506091951,1.547025539735E-02,1.7000001+ ));+#17155 = PCURVE('',#16696,#17156);+#17156 = DEFINITIONAL_REPRESENTATION('',(#17157),#17161);+#17157 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#17158,#17159,#17160),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#17158 = CARTESIAN_POINT('',(0.110655299023,0.104280980827));+#17159 = CARTESIAN_POINT('',(9.726206865555E-02,0.117029617219));+#17160 = CARTESIAN_POINT('',(7.334047003188E-02,0.117029617219));+#17161 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17162 = PCURVE('',#3102,#17163);+#17163 = DEFINITIONAL_REPRESENTATION('',(#17164),#17168);+#17164 = LINE('',#17165,#17166);+#17165 = CARTESIAN_POINT('',(0.,-0.1));+#17166 = VECTOR('',#17167,1.);+#17167 = DIRECTION('',(1.,0.));+#17168 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17169 = ORIENTED_EDGE('',*,*,#17170,.T.);+#17170 = EDGE_CURVE('',#17148,#17171,#17173,.T.);+#17171 = VERTEX_POINT('',#17172);+#17172 = CARTESIAN_POINT('',(0.668873681277,1.282025794503E-02,1.7000001+ ));+#17173 = SURFACE_CURVE('',#17174,(#17178,#17185),.PCURVE_S1.);+#17174 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#17175,#17176,#17177),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#17175 = CARTESIAN_POINT('',(0.691506091951,1.547025539735E-02,1.7000001+ ));+#17176 = CARTESIAN_POINT('',(0.679903400403,1.547025539735E-02,1.7000001+ ));+#17177 = CARTESIAN_POINT('',(0.668873681277,1.282025794503E-02,1.7000001+ ));+#17178 = PCURVE('',#16696,#17179);+#17179 = DEFINITIONAL_REPRESENTATION('',(#17180),#17184);+#17180 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#17181,#17182,#17183),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#17181 = CARTESIAN_POINT('',(7.334047003188E-02,0.117029617219));+#17182 = CARTESIAN_POINT('',(6.173777848386E-02,0.117029617219));+#17183 = CARTESIAN_POINT('',(5.070805935798E-02,0.114379619767));+#17184 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17185 = PCURVE('',#3066,#17186);+#17186 = DEFINITIONAL_REPRESENTATION('',(#17187),#17191);+#17187 = LINE('',#17188,#17189);+#17188 = CARTESIAN_POINT('',(0.,-0.1));+#17189 = VECTOR('',#17190,1.);+#17190 = DIRECTION('',(1.,0.));+#17191 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17192 = ORIENTED_EDGE('',*,*,#17193,.T.);+#17193 = EDGE_CURVE('',#17171,#16733,#17194,.T.);+#17194 = SURFACE_CURVE('',#17195,(#17199,#17206),.PCURVE_S1.);+#17195 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#17196,#17197,#17198),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#17196 = CARTESIAN_POINT('',(0.668873681277,1.282025794503E-02,1.7000001+ ));+#17197 = CARTESIAN_POINT('',(0.657843962151,1.01702604927E-02,1.7000001)+ );+#17198 = CARTESIAN_POINT('',(0.647816944764,4.870265588054E-03,1.7000001+ ));+#17199 = PCURVE('',#16696,#17200);+#17200 = DEFINITIONAL_REPRESENTATION('',(#17201),#17205);+#17201 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#17202,#17203,#17204),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#17202 = CARTESIAN_POINT('',(5.070805935798E-02,0.114379619767));+#17203 = CARTESIAN_POINT('',(3.967834023209E-02,0.111729622314));+#17204 = CARTESIAN_POINT('',(2.965132284492E-02,0.10642962741));+#17205 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17206 = PCURVE('',#3030,#17207);+#17207 = DEFINITIONAL_REPRESENTATION('',(#17208),#17212);+#17208 = LINE('',#17209,#17210);+#17209 = CARTESIAN_POINT('',(0.,-0.1));+#17210 = VECTOR('',#17211,1.);+#17211 = DIRECTION('',(1.,0.));+#17212 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17213 = ADVANCED_FACE('',(#17214),#3683,.T.);+#17214 = FACE_BOUND('',#17215,.T.);+#17215 = EDGE_LOOP('',(#17216,#17217,#17218,#17219));+#17216 = ORIENTED_EDGE('',*,*,#3667,.T.);+#17217 = ORIENTED_EDGE('',*,*,#16708,.T.);+#17218 = ORIENTED_EDGE('',*,*,#16779,.T.);+#17219 = ORIENTED_EDGE('',*,*,#17220,.F.);+#17220 = EDGE_CURVE('',#3641,#16780,#17221,.T.);+#17221 = SURFACE_CURVE('',#17222,(#17226,#17233),.PCURVE_S1.);+#17222 = LINE('',#17223,#17224);+#17223 = CARTESIAN_POINT('',(0.674173676182,8.795126679604E-02,1.8000001+ ));+#17224 = VECTOR('',#17225,1.);+#17225 = DIRECTION('',(-0.,-0.,-1.));+#17226 = PCURVE('',#3683,#17227);+#17227 = DEFINITIONAL_REPRESENTATION('',(#17228),#17232);+#17228 = LINE('',#17229,#17230);+#17229 = CARTESIAN_POINT('',(8.193505636374E-02,0.));+#17230 = VECTOR('',#17231,1.);+#17231 = DIRECTION('',(0.,-1.));+#17232 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17233 = PCURVE('',#3656,#17234);+#17234 = DEFINITIONAL_REPRESENTATION('',(#17235),#17239);+#17235 = LINE('',#17236,#17237);+#17236 = CARTESIAN_POINT('',(0.,0.));+#17237 = VECTOR('',#17238,1.);+#17238 = DIRECTION('',(0.,-1.));+#17239 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17240 = ADVANCED_FACE('',(#17241),#3656,.T.);+#17241 = FACE_BOUND('',#17242,.T.);+#17242 = EDGE_LOOP('',(#17243,#17244,#17245,#17246));+#17243 = ORIENTED_EDGE('',*,*,#3640,.T.);+#17244 = ORIENTED_EDGE('',*,*,#17220,.T.);+#17245 = ORIENTED_EDGE('',*,*,#16802,.T.);+#17246 = ORIENTED_EDGE('',*,*,#17247,.F.);+#17247 = EDGE_CURVE('',#3605,#16803,#17248,.T.);+#17248 = SURFACE_CURVE('',#17249,(#17253,#17260),.PCURVE_S1.);+#17249 = LINE('',#17250,#17251);+#17250 = CARTESIAN_POINT('',(0.674173676182,3.538104706616E-02,1.8000001+ ));+#17251 = VECTOR('',#17252,1.);+#17252 = DIRECTION('',(-0.,-0.,-1.));+#17253 = PCURVE('',#3656,#17254);+#17254 = DEFINITIONAL_REPRESENTATION('',(#17255),#17259);+#17255 = LINE('',#17256,#17257);+#17256 = CARTESIAN_POINT('',(5.257021972988E-02,0.));+#17257 = VECTOR('',#17258,1.);+#17258 = DIRECTION('',(0.,-1.));+#17259 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17260 = PCURVE('',#3624,#17261);+#17261 = DEFINITIONAL_REPRESENTATION('',(#17262),#17266);+#17262 = LINE('',#17263,#17264);+#17263 = CARTESIAN_POINT('',(0.,0.));+#17264 = VECTOR('',#17265,1.);+#17265 = DIRECTION('',(0.,-1.));+#17266 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17267 = ADVANCED_FACE('',(#17268),#3624,.T.);+#17268 = FACE_BOUND('',#17269,.T.);+#17269 = EDGE_LOOP('',(#17270,#17271,#17272,#17273));+#17270 = ORIENTED_EDGE('',*,*,#3604,.T.);+#17271 = ORIENTED_EDGE('',*,*,#17247,.T.);+#17272 = ORIENTED_EDGE('',*,*,#16825,.T.);+#17273 = ORIENTED_EDGE('',*,*,#17274,.F.);+#17274 = EDGE_CURVE('',#3569,#16826,#17275,.T.);+#17275 = SURFACE_CURVE('',#17276,(#17280,#17287),.PCURVE_S1.);+#17276 = LINE('',#17277,#17278);+#17277 = CARTESIAN_POINT('',(0.68656420481,3.874726004614E-02,1.8000001)+ );+#17278 = VECTOR('',#17279,1.);+#17279 = DIRECTION('',(-0.,-0.,-1.));+#17280 = PCURVE('',#3624,#17281);+#17281 = DEFINITIONAL_REPRESENTATION('',(#17282),#17286);+#17282 = LINE('',#17283,#17284);+#17283 = CARTESIAN_POINT('',(1.,0.));+#17284 = VECTOR('',#17285,1.);+#17285 = DIRECTION('',(0.,-1.));+#17286 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17287 = PCURVE('',#3588,#17288);+#17288 = DEFINITIONAL_REPRESENTATION('',(#17289),#17293);+#17289 = LINE('',#17290,#17291);+#17290 = CARTESIAN_POINT('',(0.,0.));+#17291 = VECTOR('',#17292,1.);+#17292 = DIRECTION('',(0.,-1.));+#17293 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17294 = ADVANCED_FACE('',(#17295),#3588,.T.);+#17295 = FACE_BOUND('',#17296,.T.);+#17296 = EDGE_LOOP('',(#17297,#17298,#17299,#17300));+#17297 = ORIENTED_EDGE('',*,*,#3568,.T.);+#17298 = ORIENTED_EDGE('',*,*,#17274,.T.);+#17299 = ORIENTED_EDGE('',*,*,#16848,.T.);+#17300 = ORIENTED_EDGE('',*,*,#17301,.F.);+#17301 = EDGE_CURVE('',#3524,#16849,#17302,.T.);+#17302 = SURFACE_CURVE('',#17303,(#17307,#17314),.PCURVE_S1.);+#17303 = LINE('',#17304,#17305);+#17304 = CARTESIAN_POINT('',(0.699097976544,3.982158333762E-02,1.8000001+ ));+#17305 = VECTOR('',#17306,1.);+#17306 = DIRECTION('',(-0.,-0.,-1.));+#17307 = PCURVE('',#3588,#17308);+#17308 = DEFINITIONAL_REPRESENTATION('',(#17309),#17313);+#17309 = LINE('',#17310,#17311);+#17310 = CARTESIAN_POINT('',(1.,0.));+#17311 = VECTOR('',#17312,1.);+#17312 = DIRECTION('',(0.,-1.));+#17313 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17314 = PCURVE('',#3549,#17315);+#17315 = DEFINITIONAL_REPRESENTATION('',(#17316),#17320);+#17316 = LINE('',#17317,#17318);+#17317 = CARTESIAN_POINT('',(0.,0.));+#17318 = VECTOR('',#17319,1.);+#17319 = DIRECTION('',(0.,-1.));+#17320 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17321 = ADVANCED_FACE('',(#17322),#3549,.T.);+#17322 = FACE_BOUND('',#17323,.T.);+#17323 = EDGE_LOOP('',(#17324,#17325,#17326,#17327));+#17324 = ORIENTED_EDGE('',*,*,#3523,.T.);+#17325 = ORIENTED_EDGE('',*,*,#17301,.T.);+#17326 = ORIENTED_EDGE('',*,*,#16871,.T.);+#17327 = ORIENTED_EDGE('',*,*,#17328,.F.);+#17328 = EDGE_CURVE('',#3488,#16872,#17329,.T.);+#17329 = SURFACE_CURVE('',#17330,(#17334,#17341),.PCURVE_S1.);+#17330 = LINE('',#17331,#17332);+#17331 = CARTESIAN_POINT('',(0.751811439379,2.019727787987E-02,1.8000001+ ));+#17332 = VECTOR('',#17333,1.);+#17333 = DIRECTION('',(-0.,-0.,-1.));+#17334 = PCURVE('',#3549,#17335);+#17335 = DEFINITIONAL_REPRESENTATION('',(#17336),#17340);+#17336 = LINE('',#17337,#17338);+#17337 = CARTESIAN_POINT('',(1.,0.));+#17338 = VECTOR('',#17339,1.);+#17339 = DIRECTION('',(0.,-1.));+#17340 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17341 = PCURVE('',#3507,#17342);+#17342 = DEFINITIONAL_REPRESENTATION('',(#17343),#17347);+#17343 = LINE('',#17344,#17345);+#17344 = CARTESIAN_POINT('',(0.,0.));+#17345 = VECTOR('',#17346,1.);+#17346 = DIRECTION('',(0.,-1.));+#17347 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17348 = ADVANCED_FACE('',(#17349),#3507,.T.);+#17349 = FACE_BOUND('',#17350,.T.);+#17350 = EDGE_LOOP('',(#17351,#17352,#17353,#17354));+#17351 = ORIENTED_EDGE('',*,*,#3487,.T.);+#17352 = ORIENTED_EDGE('',*,*,#17328,.T.);+#17353 = ORIENTED_EDGE('',*,*,#16894,.T.);+#17354 = ORIENTED_EDGE('',*,*,#17355,.F.);+#17355 = EDGE_CURVE('',#3443,#16895,#17356,.T.);+#17356 = SURFACE_CURVE('',#17357,(#17361,#17368),.PCURVE_S1.);+#17357 = LINE('',#17358,#17359);+#17358 = CARTESIAN_POINT('',(0.771292501732,-3.294591427213E-02,+ 1.8000001));+#17359 = VECTOR('',#17360,1.);+#17360 = DIRECTION('',(-0.,-0.,-1.));+#17361 = PCURVE('',#3507,#17362);+#17362 = DEFINITIONAL_REPRESENTATION('',(#17363),#17367);+#17363 = LINE('',#17364,#17365);+#17364 = CARTESIAN_POINT('',(1.,0.));+#17365 = VECTOR('',#17366,1.);+#17366 = DIRECTION('',(0.,-1.));+#17367 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17368 = PCURVE('',#3468,#17369);+#17369 = DEFINITIONAL_REPRESENTATION('',(#17370),#17374);+#17370 = LINE('',#17371,#17372);+#17371 = CARTESIAN_POINT('',(0.,0.));+#17372 = VECTOR('',#17373,1.);+#17373 = DIRECTION('',(0.,-1.));+#17374 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17375 = ADVANCED_FACE('',(#17376),#3468,.T.);+#17376 = FACE_BOUND('',#17377,.T.);+#17377 = EDGE_LOOP('',(#17378,#17379,#17380,#17381));+#17378 = ORIENTED_EDGE('',*,*,#3442,.T.);+#17379 = ORIENTED_EDGE('',*,*,#17355,.T.);+#17380 = ORIENTED_EDGE('',*,*,#16917,.T.);+#17381 = ORIENTED_EDGE('',*,*,#17382,.F.);+#17382 = EDGE_CURVE('',#3407,#16918,#17383,.T.);+#17383 = SURFACE_CURVE('',#17384,(#17388,#17395),.PCURVE_S1.);+#17384 = LINE('',#17385,#17386);+#17385 = CARTESIAN_POINT('',(0.750880359194,-8.623234952967E-02,+ 1.8000001));+#17386 = VECTOR('',#17387,1.);+#17387 = DIRECTION('',(-0.,-0.,-1.));+#17388 = PCURVE('',#3468,#17389);+#17389 = DEFINITIONAL_REPRESENTATION('',(#17390),#17394);+#17390 = LINE('',#17391,#17392);+#17391 = CARTESIAN_POINT('',(1.,0.));+#17392 = VECTOR('',#17393,1.);+#17393 = DIRECTION('',(0.,-1.));+#17394 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17395 = PCURVE('',#3426,#17396);+#17396 = DEFINITIONAL_REPRESENTATION('',(#17397),#17401);+#17397 = LINE('',#17398,#17399);+#17398 = CARTESIAN_POINT('',(0.,0.));+#17399 = VECTOR('',#17400,1.);+#17400 = DIRECTION('',(0.,-1.));+#17401 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17402 = ADVANCED_FACE('',(#17403),#3426,.T.);+#17403 = FACE_BOUND('',#17404,.T.);+#17404 = EDGE_LOOP('',(#17405,#17406,#17407,#17408));+#17405 = ORIENTED_EDGE('',*,*,#3406,.T.);+#17406 = ORIENTED_EDGE('',*,*,#17382,.T.);+#17407 = ORIENTED_EDGE('',*,*,#16940,.T.);+#17408 = ORIENTED_EDGE('',*,*,#17409,.F.);+#17409 = EDGE_CURVE('',#3371,#16941,#17410,.T.);+#17410 = SURFACE_CURVE('',#17411,(#17415,#17422),.PCURVE_S1.);+#17411 = LINE('',#17412,#17413);+#17412 = CARTESIAN_POINT('',(0.695087169589,-0.105713411882,1.8000001));+#17413 = VECTOR('',#17414,1.);+#17414 = DIRECTION('',(-0.,-0.,-1.));+#17415 = PCURVE('',#3426,#17416);+#17416 = DEFINITIONAL_REPRESENTATION('',(#17417),#17421);+#17417 = LINE('',#17418,#17419);+#17418 = CARTESIAN_POINT('',(1.,0.));+#17419 = VECTOR('',#17420,1.);+#17420 = DIRECTION('',(0.,-1.));+#17421 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17422 = PCURVE('',#3390,#17423);+#17423 = DEFINITIONAL_REPRESENTATION('',(#17424),#17428);+#17424 = LINE('',#17425,#17426);+#17425 = CARTESIAN_POINT('',(0.,0.));+#17426 = VECTOR('',#17427,1.);+#17427 = DIRECTION('',(0.,-1.));+#17428 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17429 = ADVANCED_FACE('',(#17430),#3390,.T.);+#17430 = FACE_BOUND('',#17431,.T.);+#17431 = EDGE_LOOP('',(#17432,#17433,#17434,#17435));+#17432 = ORIENTED_EDGE('',*,*,#3370,.T.);+#17433 = ORIENTED_EDGE('',*,*,#17409,.T.);+#17434 = ORIENTED_EDGE('',*,*,#16963,.T.);+#17435 = ORIENTED_EDGE('',*,*,#17436,.F.);+#17436 = EDGE_CURVE('',#3335,#16964,#17437,.T.);+#17437 = SURFACE_CURVE('',#17438,(#17442,#17449),.PCURVE_S1.);+#17438 = LINE('',#17439,#17440);+#17439 = CARTESIAN_POINT('',(0.663931794136,-0.103421522193,1.8000001));+#17440 = VECTOR('',#17441,1.);+#17441 = DIRECTION('',(-0.,-0.,-1.));+#17442 = PCURVE('',#3390,#17443);+#17443 = DEFINITIONAL_REPRESENTATION('',(#17444),#17448);+#17444 = LINE('',#17445,#17446);+#17445 = CARTESIAN_POINT('',(1.,0.));+#17446 = VECTOR('',#17447,1.);+#17447 = DIRECTION('',(0.,-1.));+#17448 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17449 = PCURVE('',#3354,#17450);+#17450 = DEFINITIONAL_REPRESENTATION('',(#17451),#17455);+#17451 = LINE('',#17452,#17453);+#17452 = CARTESIAN_POINT('',(0.,0.));+#17453 = VECTOR('',#17454,1.);+#17454 = DIRECTION('',(0.,-1.));+#17455 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17456 = ADVANCED_FACE('',(#17457),#3354,.T.);+#17457 = FACE_BOUND('',#17458,.T.);+#17458 = EDGE_LOOP('',(#17459,#17460,#17461,#17462));+#17459 = ORIENTED_EDGE('',*,*,#3334,.T.);+#17460 = ORIENTED_EDGE('',*,*,#17436,.T.);+#17461 = ORIENTED_EDGE('',*,*,#16986,.T.);+#17462 = ORIENTED_EDGE('',*,*,#17463,.F.);+#17463 = EDGE_CURVE('',#3308,#16987,#17464,.T.);+#17464 = SURFACE_CURVE('',#17465,(#17469,#17476),.PCURVE_S1.);+#17465 = LINE('',#17466,#17467);+#17466 = CARTESIAN_POINT('',(0.63864938601,-9.65458531279E-02,1.8000001)+ );+#17467 = VECTOR('',#17468,1.);+#17468 = DIRECTION('',(-0.,-0.,-1.));+#17469 = PCURVE('',#3354,#17470);+#17470 = DEFINITIONAL_REPRESENTATION('',(#17471),#17475);+#17471 = LINE('',#17472,#17473);+#17472 = CARTESIAN_POINT('',(1.,0.));+#17473 = VECTOR('',#17474,1.);+#17474 = DIRECTION('',(0.,-1.));+#17475 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17476 = PCURVE('',#3323,#17477);+#17477 = DEFINITIONAL_REPRESENTATION('',(#17478),#17482);+#17478 = LINE('',#17479,#17480);+#17479 = CARTESIAN_POINT('',(0.,0.));+#17480 = VECTOR('',#17481,1.);+#17481 = DIRECTION('',(0.,-1.));+#17482 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17483 = ADVANCED_FACE('',(#17484),#3323,.T.);+#17484 = FACE_BOUND('',#17485,.T.);+#17485 = EDGE_LOOP('',(#17486,#17487,#17488,#17489));+#17486 = ORIENTED_EDGE('',*,*,#3307,.T.);+#17487 = ORIENTED_EDGE('',*,*,#17463,.T.);+#17488 = ORIENTED_EDGE('',*,*,#17009,.T.);+#17489 = ORIENTED_EDGE('',*,*,#17490,.F.);+#17490 = EDGE_CURVE('',#3272,#17010,#17491,.T.);+#17491 = SURFACE_CURVE('',#17492,(#17496,#17503),.PCURVE_S1.);+#17492 = LINE('',#17493,#17494);+#17493 = CARTESIAN_POINT('',(0.63864938601,-6.718101649404E-02,1.8000001+ ));+#17494 = VECTOR('',#17495,1.);+#17495 = DIRECTION('',(-0.,-0.,-1.));+#17496 = PCURVE('',#3323,#17497);+#17497 = DEFINITIONAL_REPRESENTATION('',(#17498),#17502);+#17498 = LINE('',#17499,#17500);+#17499 = CARTESIAN_POINT('',(2.936483663386E-02,0.));+#17500 = VECTOR('',#17501,1.);+#17501 = DIRECTION('',(0.,-1.));+#17502 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17503 = PCURVE('',#3291,#17504);+#17504 = DEFINITIONAL_REPRESENTATION('',(#17505),#17509);+#17505 = LINE('',#17506,#17507);+#17506 = CARTESIAN_POINT('',(0.,0.));+#17507 = VECTOR('',#17508,1.);+#17508 = DIRECTION('',(0.,-1.));+#17509 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17510 = ADVANCED_FACE('',(#17511),#3291,.T.);+#17511 = FACE_BOUND('',#17512,.T.);+#17512 = EDGE_LOOP('',(#17513,#17514,#17515,#17516));+#17513 = ORIENTED_EDGE('',*,*,#3271,.T.);+#17514 = ORIENTED_EDGE('',*,*,#17490,.T.);+#17515 = ORIENTED_EDGE('',*,*,#17032,.T.);+#17516 = ORIENTED_EDGE('',*,*,#17517,.F.);+#17517 = EDGE_CURVE('',#3236,#17033,#17518,.T.);+#17518 = SURFACE_CURVE('',#17519,(#17523,#17530),.PCURVE_S1.);+#17519 = LINE('',#17520,#17521);+#17520 = CARTESIAN_POINT('',(0.665149360533,-7.78526278561E-02,1.8000001+ ));+#17521 = VECTOR('',#17522,1.);+#17522 = DIRECTION('',(-0.,-0.,-1.));+#17523 = PCURVE('',#3291,#17524);+#17524 = DEFINITIONAL_REPRESENTATION('',(#17525),#17529);+#17525 = LINE('',#17526,#17527);+#17526 = CARTESIAN_POINT('',(1.,0.));+#17527 = VECTOR('',#17528,1.);+#17528 = DIRECTION('',(0.,-1.));+#17529 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17530 = PCURVE('',#3255,#17531);+#17531 = DEFINITIONAL_REPRESENTATION('',(#17532),#17536);+#17532 = LINE('',#17533,#17534);+#17533 = CARTESIAN_POINT('',(0.,0.));+#17534 = VECTOR('',#17535,1.);+#17535 = DIRECTION('',(0.,-1.));+#17536 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17537 = ADVANCED_FACE('',(#17538),#3255,.T.);+#17538 = FACE_BOUND('',#17539,.T.);+#17539 = EDGE_LOOP('',(#17540,#17541,#17542,#17543));+#17540 = ORIENTED_EDGE('',*,*,#3235,.T.);+#17541 = ORIENTED_EDGE('',*,*,#17517,.T.);+#17542 = ORIENTED_EDGE('',*,*,#17055,.T.);+#17543 = ORIENTED_EDGE('',*,*,#17544,.F.);+#17544 = EDGE_CURVE('',#3200,#17056,#17545,.T.);+#17545 = SURFACE_CURVE('',#17546,(#17550,#17557),.PCURVE_S1.);+#17546 = LINE('',#17547,#17548);+#17547 = CARTESIAN_POINT('',(0.692365550584,-8.136208394161E-02,+ 1.8000001));+#17548 = VECTOR('',#17549,1.);+#17549 = DIRECTION('',(-0.,-0.,-1.));+#17550 = PCURVE('',#3255,#17551);+#17551 = DEFINITIONAL_REPRESENTATION('',(#17552),#17556);+#17552 = LINE('',#17553,#17554);+#17553 = CARTESIAN_POINT('',(1.,0.));+#17554 = VECTOR('',#17555,1.);+#17555 = DIRECTION('',(0.,-1.));+#17556 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17557 = PCURVE('',#3219,#17558);+#17558 = DEFINITIONAL_REPRESENTATION('',(#17559),#17563);+#17559 = LINE('',#17560,#17561);+#17560 = CARTESIAN_POINT('',(0.,0.));+#17561 = VECTOR('',#17562,1.);+#17562 = DIRECTION('',(0.,-1.));+#17563 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17564 = ADVANCED_FACE('',(#17565),#3219,.T.);+#17565 = FACE_BOUND('',#17566,.T.);+#17566 = EDGE_LOOP('',(#17567,#17568,#17569,#17570));+#17567 = ORIENTED_EDGE('',*,*,#3199,.T.);+#17568 = ORIENTED_EDGE('',*,*,#17544,.T.);+#17569 = ORIENTED_EDGE('',*,*,#17078,.T.);+#17570 = ORIENTED_EDGE('',*,*,#17571,.F.);+#17571 = EDGE_CURVE('',#3164,#17079,#17572,.T.);+#17572 = SURFACE_CURVE('',#17573,(#17577,#17584),.PCURVE_S1.);+#17573 = LINE('',#17574,#17575);+#17574 = CARTESIAN_POINT('',(0.729250650258,-6.875669065488E-02,+ 1.8000001));+#17575 = VECTOR('',#17576,1.);+#17576 = DIRECTION('',(-0.,-0.,-1.));+#17577 = PCURVE('',#3219,#17578);+#17578 = DEFINITIONAL_REPRESENTATION('',(#17579),#17583);+#17579 = LINE('',#17580,#17581);+#17580 = CARTESIAN_POINT('',(1.,0.));+#17581 = VECTOR('',#17582,1.);+#17582 = DIRECTION('',(0.,-1.));+#17583 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17584 = PCURVE('',#3183,#17585);+#17585 = DEFINITIONAL_REPRESENTATION('',(#17586),#17590);+#17586 = LINE('',#17587,#17588);+#17587 = CARTESIAN_POINT('',(0.,0.));+#17588 = VECTOR('',#17589,1.);+#17589 = DIRECTION('',(0.,-1.));+#17590 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17591 = ADVANCED_FACE('',(#17592),#3183,.T.);+#17592 = FACE_BOUND('',#17593,.T.);+#17593 = EDGE_LOOP('',(#17594,#17595,#17596,#17597));+#17594 = ORIENTED_EDGE('',*,*,#3163,.T.);+#17595 = ORIENTED_EDGE('',*,*,#17571,.T.);+#17596 = ORIENTED_EDGE('',*,*,#17101,.T.);+#17597 = ORIENTED_EDGE('',*,*,#17598,.F.);+#17598 = EDGE_CURVE('',#3119,#17102,#17599,.T.);+#17599 = SURFACE_CURVE('',#17600,(#17604,#17611),.PCURVE_S1.);+#17600 = LINE('',#17601,#17602);+#17601 = CARTESIAN_POINT('',(0.742214151309,-3.294591427213E-02,+ 1.8000001));+#17602 = VECTOR('',#17603,1.);+#17603 = DIRECTION('',(-0.,-0.,-1.));+#17604 = PCURVE('',#3183,#17605);+#17605 = DEFINITIONAL_REPRESENTATION('',(#17606),#17610);+#17606 = LINE('',#17607,#17608);+#17607 = CARTESIAN_POINT('',(1.,0.));+#17608 = VECTOR('',#17609,1.);+#17609 = DIRECTION('',(0.,-1.));+#17610 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17611 = PCURVE('',#3144,#17612);+#17612 = DEFINITIONAL_REPRESENTATION('',(#17613),#17617);+#17613 = LINE('',#17614,#17615);+#17614 = CARTESIAN_POINT('',(0.,0.));+#17615 = VECTOR('',#17616,1.);