SN65HVD06EIM

{
  "slug": "sn65hvd06eim",
  "version": "0.1.0",
  "type": "component",
  "description": "HGSEMI RS-485 / RS-422 ICs, SOP-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "interface",
    "sn65hvd06eim",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "sn65hvd06eim.kicad_sym",
    "sn65hvd06eim.kicad_mod",
    "sn65hvd06eim.glb",
    "sn65hvd06eim.step",
    "sn65hvd06eim.lbr",
    "docs/hero.png",
    "docs/sn65hvd06eim-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "sn65hvd06eim-hero.glb",
    "sn65hvd06eim-hero.overlay.json",
    "sn65hvd06eim-etched.glb"
  ],
  "component": {
    "mpn": "SN65HVD06EIM",
    "manufacturer": "HGSEMI",
    "package": "SOP-8",
    "pin_count": 8,
    "category": "Interface",
    "subcategory": "RS-485 / RS-422 ICs",
    "datasheet": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8590222496260648960",
    "parts": {
      "symbol": "sn65hvd06eim.kicad_sym",
      "footprint": "sn65hvd06eim.kicad_mod",
      "model_3d": "sn65hvd06eim-hero.glb",
      "model_3d_plain": "sn65hvd06eim-etched.glb",
      "model_3d_step": "sn65hvd06eim-etched.step",
      "model_3d_step_plain": "sn65hvd06eim.step",
      "lbr": "sn65hvd06eim.lbr"
    },
    "distributor_links": {
      "lcsc": "C2902468"
    },
    "distributor_check": {
      "checked_at": "2026-10-20T20:57:01Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": null,
        "status": "no match"
      },
      "mouser": {
        "pn": null,
        "status": "no match"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "R",
        "type": "tri_state",
        "description": "Receiver output that goes high when VID is at or above -0.01 V, low when VID is at or below -0.2 V, and high-impedance when RE is high, with output current limited to -11 mA to 11 mA absolute maximum (recommended IOH -8 mA, IOL 8 mA)."
      },
      {
        "number": "2",
        "name": "RE",
        "type": "input",
        "description": "Active-low receiver enable whose high level (2 V minimum) puts R into high impedance, with a 0.8 V maximum low-level input."
      },
      {
        "number": "3",
        "name": "DE",
        "type": "input",
        "description": "Active-high driver enable that must be high (2 V minimum) to drive A and B, with a 0.8 V maximum low-level input, and driver outputs go high-impedance when DE is low."
      },
      {
        "number": "4",
        "name": "D",
        "type": "input",
        "description": "Driver data input, with 2 V minimum high-level and 0.8 V maximum low-level thresholds, and input voltage limited to -0.5 V to VCC + 0.5 V."
      },
      {
        "number": "5",
        "name": "GND",
        "type": "power_in",
        "description": "Network ground terminal to which all voltages except the differential bus voltages are referenced."
      },
      {
        "number": "6",
        "name": "A",
        "type": "bidirectional",
        "description": "Non-inverting differential bus terminal (driver output and receiver input) rated -9 V to 14 V absolute maximum, with a -7 V to 12 V bus common-mode range and 16 kV HBM ESD protection."
      },
      {
        "number": "7",
        "name": "B",
        "type": "bidirectional",
        "description": "Inverting differential bus terminal (driver output and receiver input) rated -9 V to 14 V absolute maximum, with a -7 V to 12 V bus common-mode range and 16 kV HBM ESD protection."
      },
      {
        "number": "8",
        "name": "VCC",
        "type": "power_in",
        "description": "Supply voltage with a recommended range of 4.5 V to 5.5 V and an absolute maximum range of -0.3 V to 6 V."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: Pinout is taken from the 'N OR M PACKAGE (TOP VIEW)' diagram on page 1, which covers the SOP8L (M) v; Pin descriptions are composed from the recommended-operating, absolute-maximum, and function-table s"
        ],
        "pages_sent": 19,
        "cost_usd": 0.0669,
        "at": "2026-10-20T20:54:25"
      },
      "datasheet": {
        "url": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8590222496260648960",
        "pages": 19,
        "sha256": "315036adf5e24adb",
        "source_tier": "lcsc"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 8,
        "described": 8,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "sn65hvd06eim.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6.0,
          4.9,
          1.75
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "07f46cff378d30e6c27dfd5a03092c795323f86d91c71fc7e743f4f418dc553a",
        "checked": "2026-10-20",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "sn65hvd06eim-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6.0,
          4.9,
          1.75
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "cf51f6b5600a6397cb09ed63be800198975103ce1985a9f3e85cb5d1319bb4aa",
        "checked": "2026-10-20",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  }
}