component
SN65HVD06DR
Public Made by Adomby adom
Texas Instruments RS-485 / RS-422 ICs, SOIC-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads on click. Unloads only if this page sits in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads on click. Unloads only if this page sits in the background.
PCB Footprint
Open full view ↗Loads on click. Unloads only if this page sits in the background.
Datasheet
Open in new tab ↗Loads on click. Unloads only if this page sits in the background.
README
markdownSN65HVD06DR
Texas Instruments · RS-485 / RS-422 ICs · SOIC-8
SN65HVD06DR from Texas Instruments, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | R | output | Receiver data output; active when RE is low, high-impedance when RE is high; VOH ≥ 4 V at IOH = -8 mA, VOL ≤ 0.4 V at IOL = 8 mA. |
| 2 | RE | input | Active-low receiver output enable; driving high forces R output to high-impedance state; VIH = 2 V min, VIL = 0.8 V max. |
| 3 | DE | input | Active-high driver output enable; driving low forces A and B driver outputs to high-impedance state; VIH = 2 V min, VIL = 0.8 V max. |
| 4 | D | input | Driver data input; determines polarity of differential output on A and B bus pins when DE is high; VIH = 2 V min, VIL = 0.8 V max. |
| 5 | GND | power_in | Ground reference; all signal voltages are referenced to this terminal. |
| 6 | A | bidirectional | Non-inverting differential bus I/O terminal; operating range -7 V to 12 V (common-mode), bus ESD protection exceeds 16 kV HBM; 1/8-unit-load input current max 0.1 mA at VA = 12 V. |
| 7 | B | bidirectional | Inverting differential bus I/O terminal; operating range -7 V to 12 V (common-mode), bus ESD protection exceeds 16 kV HBM; 1/8-unit-load input current max 0.1 mA at VB = 12 V. |
| 8 | VCC | power_in | Positive supply voltage; recommended operating range 4.5 V to 5.5 V; ICC 9 mA typical with receiver and driver both enabled, 1 µA typical in standby. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOIC-8 |
| Category | Interface |
| Pins | 8 |
CAD (KiCad official)
- Symbol:
SN65HVD06DR - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOIC-8 (KiCad packages3D, STEP)
- 3D model files:
sn65hvd06dr-etched.step/sn65hvd06dr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);sn65hvd06dr.step/sn65hvd06dr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (29 pp, sha256
52c3ae6cd944d9af, retrieved 2026-09-26, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.2, primaryclaude-haiku-4-5-20251001(text), consensusclaude-sonnet-4-6(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).