SN65C3232EDBR

{
  "slug": "sn65c3232edbr",
  "version": "0.1.0",
  "type": "component",
  "description": "Texas Instruments RS232 ICs, SSOP-16-208mil. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "interface",
    "sn65c3232edbr",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "sn65c3232edbr.kicad_sym",
    "sn65c3232edbr.kicad_mod",
    "sn65c3232edbr.glb",
    "sn65c3232edbr.step",
    "sn65c3232edbr.lbr",
    "docs/hero.png",
    "docs/sn65c3232edbr-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "sn65c3232edbr-hero.glb",
    "sn65c3232edbr-hero.overlay.json"
  ],
  "component": {
    "mpn": "SN65C3232EDBR",
    "manufacturer": "Texas Instruments",
    "package": "SSOP-16-208mil",
    "pin_count": 16,
    "category": "Interface",
    "subcategory": "RS232 ICs",
    "datasheet": "https://www.ti.com/cn/lit/gpn/sn65c3232e",
    "parts": {
      "symbol": "sn65c3232edbr.kicad_sym",
      "footprint": "sn65c3232edbr.kicad_mod",
      "model_3d": "sn65c3232edbr-hero.glb",
      "model_3d_plain": "sn65c3232edbr.glb",
      "model_3d_step": "sn65c3232edbr-etched.step",
      "model_3d_step_plain": "sn65c3232edbr.step",
      "lbr": "sn65c3232edbr.lbr"
    },
    "distributor_links": {
      "lcsc": "C2671023",
      "digikey": "296-20999-2-ND",
      "mouser": "595-SN65C3232EDBR"
    },
    "distributor_check": {
      "checked_at": "2026-10-07T03:04:32Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": "296-20999-2-ND",
        "status": "found"
      },
      "mouser": {
        "pn": "595-SN65C3232EDBR",
        "status": "found"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "C1+",
        "type": "passive",
        "description": "Positive lead of the C1 charge-pump capacitor."
      },
      {
        "number": "2",
        "name": "V+",
        "type": "power_out",
        "description": "Positive charge pump output for storage capacitor only (absolute maximum 7 V, V+ - V- max 13 V)."
      },
      {
        "number": "3",
        "name": "C1-",
        "type": "passive",
        "description": "Negative lead of the C1 charge-pump capacitor."
      },
      {
        "number": "4",
        "name": "C2+",
        "type": "passive",
        "description": "Positive lead of the C2 charge-pump capacitor."
      },
      {
        "number": "5",
        "name": "C2-",
        "type": "passive",
        "description": "Negative lead of the C2 charge-pump capacitor."
      },
      {
        "number": "6",
        "name": "V-",
        "type": "power_out",
        "description": "Negative charge pump output for storage capacitor only (absolute maximum -7 V)."
      },
      {
        "number": "7",
        "name": "DOUT2",
        "type": "output",
        "description": "RS232 line data output to the remote RS232 system, with ±15 kV HBM and IEC 61000-4-2 ESD protection."
      },
      {
        "number": "8",
        "name": "RIN2",
        "type": "input",
        "description": "RS232 line data input from the remote RS232 system, with ±25 V input range, 5 kΩ typical input resistance and ±15 kV ESD protection."
      },
      {
        "number": "9",
        "name": "ROUT2",
        "type": "output",
        "description": "Logic data output to the UART; goes high when RIN2 is open."
      },
      {
        "number": "10",
        "name": "DIN2",
        "type": "input",
        "description": "Logic data input from the UART; must be connected to a valid high or low logic level (0 to 5.5 V)."
      },
      {
        "number": "11",
        "name": "DIN1",
        "type": "input",
        "description": "Logic data input from the UART; must be connected to a valid high or low logic level (0 to 5.5 V)."
      },
      {
        "number": "12",
        "name": "ROUT1",
        "type": "output",
        "description": "Logic data output to the UART; goes high when RIN1 is open."
      },
      {
        "number": "13",
        "name": "RIN1",
        "type": "input",
        "description": "RS232 line data input from the remote RS232 system, with ±25 V input range, 5 kΩ typical input resistance and ±15 kV ESD protection."
      },
      {
        "number": "14",
        "name": "DOUT1",
        "type": "output",
        "description": "RS232 line data output to the remote RS232 system, with ±15 kV HBM and IEC 61000-4-2 ESD protection."
      },
      {
        "number": "15",
        "name": "GND",
        "type": "power_in",
        "description": "Ground (listed as GRD in the pin table, GND in the pinout diagram)."
      },
      {
        "number": "16",
        "name": "VCC",
        "type": "power_in",
        "description": "Supply voltage, connect to an external 3-V to 5.5-V power supply; a minimum 1-µF capacitor to GND is needed to meet the IEC ESD level."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-4-5-20251001",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [],
        "pages_sent": 32,
        "cost_usd": 0.2005,
        "at": "2026-10-07T03:04:15"
      },
      "datasheet": {
        "url": "https://www.ti.com/cn/lit/gpn/sn65c3232e",
        "pages": 32,
        "sha256": "9a8ff990a7fbdf5c",
        "source_tier": "lcsc"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 16,
        "described": 16,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "sn65c3232edbr.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          7.8,
          6.2,
          2.1
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "d0e11e46aeca5dbaa5c4bb538f3f4899761267cabdeba6486325ae9e979c03ef",
        "checked": "2026-10-07",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "sn65c3232edbr-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          7.8,
          6.2,
          2.1
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "249a03721700b8e6ddbe221769f93959cb980dfc0263b241a79a4a088c035f1a",
        "checked": "2026-10-07",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  }
}