component
SN65C3223EDBR
Public Made by Adomby adom
Texas Instruments RS232 ICs, SSOP-20-208mil. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads on click. Unloads only if this page sits in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads on click. Unloads only if this page sits in the background.
PCB Footprint
Open full view ↗Loads on click. Unloads only if this page sits in the background.
Datasheet
Open in new tab ↗Loads on click. Unloads only if this page sits in the background.
README
markdownSN65C3223EDBR
Texas Instruments · RS232 ICs · SSOP-20-208mil
SN65C3223EDBR from Texas Instruments, in a SSOP-20-208mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | EN | input | Receiver enable input; when high the receiver outputs are high-impedance, with logic levels VIL 0.8 V max and VIH 2 V (3.3 V) or 2.4 V (5 V) min, tolerant to 5.5 V. |
| 2 | C1+ | passive | Positive terminal of charge-pump capacitor C1 (0.1 µF at 3.3 V, 0.047 µF at 5 V). |
| 3 | V+ | power_out | Positive charge-pump output supply, absolute maximum 7 V, decoupled with capacitor C3 to VCC or GND. |
| 4 | C1− | passive | Negative terminal of charge-pump capacitor C1. |
| 5 | C2+ | passive | Positive terminal of charge-pump capacitor C2 (0.1 µF at 3.3 V, 0.33 µF at 5 V). |
| 6 | C2− | passive | Negative terminal of charge-pump capacitor C2. |
| 7 | V− | power_out | Negative charge-pump output supply, absolute maximum -7 V, decoupled with capacitor C4 to GND. |
| 8 | DOUT2 | output | RS-232 driver 2 output with ±15-kV HBM ESD protection, swing at least ±5 V into 3 kΩ and absolute maximum ±13.2 V. |
| 9 | RIN2 | input | RS-232 receiver 2 input with ±15-kV HBM ESD protection, input voltage ±25 V and 3 kΩ to 5 kΩ input resistance. |
| 10 | ROUT2 | output | Logic-level receiver 2 output, high-impedance when EN is high. |
| 11 | INVALID | output | Valid-signal indicator output, high if any receiver input is above 2.7 V or below -2.7 V and low if inputs stay between -0.3 V and 0.3 V for more than 30 µs. |
| 12 | DIN2 | input | Logic-level driver 2 input, VIL 0.8 V max, tolerant to 5.5 V. |
| 13 | DIN1 | input | Logic-level driver 1 input, VIL 0.8 V max, tolerant to 5.5 V. |
| 14 | FORCEON | input | Driver force-on input; high with FORCEOFF high disables auto-powerdown, low with FORCEOFF high enables auto-powerdown. |
| 15 | ROUT1 | output | Logic-level receiver 1 output, high-impedance when EN is high. |
| 16 | RIN1 | input | RS-232 receiver 1 input with ±15-kV HBM ESD protection, input voltage ±25 V and 3 kΩ to 5 kΩ input resistance. |
| 17 | DOUT1 | output | RS-232 driver 1 output with ±15-kV HBM ESD protection, swing at least ±5 V into 3 kΩ and absolute maximum ±13.2 V. |
| 18 | GND | power_in | Ground, with ±15-kV ESD protection pin to pin. |
| 19 | VCC | power_in | Supply voltage input, 3 V to 3.6 V or 4.5 V to 5.5 V recommended, absolute maximum 6 V, with a bypass capacitor. |
| 20 | FORCEOFF | input | Force-off input; low shuts off drivers and receivers (supply current 1 µA typ), high allows normal or auto-powerdown operation. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SSOP-20-208mil |
| Category | Interface |
| Pins | 20 |
CAD (KiCad official)
- Symbol:
SN65C3223EDBR - Footprint:
Package_SO:SSOP-20_5.3x7.2mm_P0.65mm - 3D model: SSOP-20-208mil (KiCad packages3D, STEP)
- 3D model files:
sn65c3223edbr-etched.step/sn65c3223edbr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);sn65c3223edbr.step/sn65c3223edbr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (26 pp, sha256
ad63f263f8a35fb6, retrieved 2026-10-08, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).