component
SN65C1167EPWR
Public Made by Adomby adom
Texas Instruments RS-485 / RS-422 ICs, TSSOP-16. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads on click. Unloads only if this page sits in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads on click. Unloads only if this page sits in the background.
PCB Footprint
Open full view ↗Loads on click. Unloads only if this page sits in the background.
Datasheet
Open in new tab ↗Loads on click. Unloads only if this page sits in the background.
README
markdownSN65C1167EPWR
Texas Instruments · RS-485 / RS-422 ICs · TSSOP-16
SN65C1167EPWR from Texas Instruments, in a TSSOP-16. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | 1B | input | RS422 differential input (inverting) to receiver 1; common-mode input voltage ±7V |
| 2 | 1A | input | RS422 differential input (noninverting) to receiver 1; common-mode input voltage ±7V |
| 3 | 1R | tri_state | Logic data output of RS422 receiver 1; 0 to VCC output, high-impedance when RE disabled |
| 4 | RE | input | Receiver enable pin (active low); controls both receiver outputs to high-impedance state when high |
| 5 | 2R | tri_state | Logic data output of RS422 receiver 2; 0 to VCC output, high-impedance when RE disabled |
| 6 | 2A | input | RS422 differential input (noninverting) to receiver 2; common-mode input voltage ±7V |
| 7 | 2B | input | RS422 differential input (inverting) to receiver 2; common-mode input voltage ±7V |
| 8 | GND | power_in | Device ground pin |
| 9 | 2D | input | Logic data input to RS422 driver 2; input voltage 0 to 5.5V |
| 10 | 2Y | tri_state | RS-422 differential (noninverting) driver output 2; high-impedance when DE disabled |
| 11 | 2Z | tri_state | RS-422 differential (inverting) driver output 2; high-impedance when DE disabled |
| 12 | DE | input | Driver enable (active high); controls both driver outputs to high-impedance state when low |
| 13 | 1Z | tri_state | RS-422 differential (inverting) driver output 1; high-impedance when DE disabled |
| 14 | 1Y | tri_state | RS-422 differential (noninverting) driver output 1; high-impedance when DE disabled |
| 15 | 1D | input | Logic data input to RS422 driver 1; input voltage 0 to 5.5V |
| 16 | VCC | power_in | Power supply; recommended operating voltage 4.5V to 5.5V |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | TSSOP-16 |
| Category | Interface |
| Pins | 16 |
CAD (KiCad official)
- Symbol:
SN65C1167EPWR - Footprint:
Package_SO:TSSOP-16_4.4x5mm_P0.65mm - 3D model: TSSOP-16 (KiCad packages3D, STEP)
- 3D model files:
sn65c1167epwr-etched.step/sn65c1167epwr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);sn65c1167epwr.step/sn65c1167epwr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (29 pp, sha256
1eb6c04421d238ad, retrieved 2026-09-27, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.2, primaryclaude-haiku-4-5-20251001(text), consensusclaude-sonnet-4-6(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).