main
Ray Publish 0.1.0 6fa2cfe
{
  "slug": "sn6507dgqrq1",
  "version": "0.1.0",
  "type": "component",
  "description": "Texas Instruments Power Management - Specialized, HVSSOP-10. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "power management (pmic)",
    "sn6507dgqrq1",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "sn6507dgqrq1.kicad_sym",
    "sn6507dgqrq1.kicad_mod",
    "sn6507dgqrq1.glb",
    "sn6507dgqrq1.step",
    "sn6507dgqrq1.lbr",
    "docs/hero.png",
    "docs/sn6507dgqrq1-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "sn6507dgqrq1-hero.glb",
    "sn6507dgqrq1-hero.overlay.json",
    "sn6507dgqrq1-etched.glb"
  ],
  "component": {
    "mpn": "SN6507DGQRQ1",
    "manufacturer": "Texas Instruments",
    "package": "HVSSOP-10",
    "pin_count": 11,
    "category": "Power Management (PMIC)",
    "subcategory": "Power Management - Specialized",
    "datasheet": "https://www.ti.com/lit/ds/symlink/sn6507-q1.pdf",
    "parts": {
      "symbol": "sn6507dgqrq1.kicad_sym",
      "footprint": "sn6507dgqrq1.kicad_mod",
      "model_3d": "sn6507dgqrq1-hero.glb",
      "model_3d_plain": "sn6507dgqrq1-etched.glb",
      "model_3d_step": "sn6507dgqrq1-etched.step",
      "model_3d_step_plain": "sn6507dgqrq1.step",
      "lbr": "sn6507dgqrq1.lbr"
    },
    "distributor_links": {
      "lcsc": "C7528027"
    },
    "distributor_check": {
      "checked_at": "2026-11-10T10:48:31Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": null,
        "status": "deferred",
        "error": "shared DigiKey quota guard: 875 calls left today"
      },
      "mouser": {
        "pn": null,
        "status": "quota"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "SW1",
        "type": "output",
        "description": "Open-drain output of the first power MOSFET (switch 1), typically connected to either outer terminal of the center-tap transformer, with external traces kept short because of large currents."
      },
      {
        "number": "2",
        "name": "GND",
        "type": "power_in",
        "description": "Ground connection for the internal control circuits and power MOSFET; pin 2 and pin 9 must be shorted on the PCB for optimized emissions and efficiency."
      },
      {
        "number": "3",
        "name": "VCC",
        "type": "power_in",
        "description": "Main supply pin for the power and analog circuits, specified at 3 V to 36 V in the recommended operating conditions, and it sees short high-current pulses during power-switch turn-on and turn-off."
      },
      {
        "number": "4",
        "name": "EN/UVLO",
        "type": "input",
        "description": "Enable and undervoltage-lockout programming input; the device switches only when this pin is above the EN/UVLO threshold (1.5 V typical rising) and VCC is above its UVLO threshold, and it stops switching when floating or below the threshold."
      },
      {
        "number": "5",
        "name": "DC",
        "type": "input",
        "description": "Duty-cycle control input where a resistor to GND sets the duty cycle; leaving it floating selects the 48% typical default, and duty-cycle control is disabled in SYNC mode."
      },
      {
        "number": "6",
        "name": "SR",
        "type": "input",
        "description": "Slew-rate control input where a resistor to GND sets the slew rate of SW1 and SW2 (RSR 4.8 kΩ to 21 kΩ), floating selects the default slew rate, and a short to GND is treated as a fault that stops switching."
      },
      {
        "number": "7",
        "name": "CLK",
        "type": "input",
        "description": "External clock input for SYNC mode or frequency-program pin, where a resistor to GND (4 kΩ to 111 kΩ) sets the switching frequency, a short to GND selects the 1 MHz default, and a floating pin stops switching."
      },
      {
        "number": "8",
        "name": "SS/ILIM",
        "type": "input",
        "description": "Multifunction soft-start and current-limit pin, where a capacitor to GND (0.05 µF to 10 µF recommended) sets the soft-start time and a resistor to GND (18 kΩ to 261 kΩ) sets the programmable current limit, and both must be present."
      },
      {
        "number": "9",
        "name": "GND",
        "type": "power_in",
        "description": "Ground connection for the internal control circuits and power MOSFET; pin 9 and pin 2 must be shorted on the PCB for optimized emissions and efficiency."
      },
      {
        "number": "10",
        "name": "SW2",
        "type": "output",
        "description": "Open-drain output of the second power MOSFET (switch 2), typically connected to either outer terminal of the center-tap transformer, with external traces kept short because of large currents."
      },
      {
        "number": "11",
        "name": "PowerPAD",
        "type": "power_in",
        "description": "Exposed thermal pad that must be electrically connected to GND pins 2 and 9 on the printed circuit board for proper operation."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: The PowerPAD is an exposed thermal pad, not a numbered lead; it is listed as pin 11 as printed in Ta; Open-drain SW1 and SW2 outputs are typed as KiCad 'output' because the datasheet marks them 'O'; the; Pin 3 VCC is typed as power_in based on the datasheet marking 'P'; the datasheet does not give a sep"
        ],
        "pages_sent": 44,
        "cost_usd": 0.1763,
        "at": "2026-11-10T10:48:18"
      },
      "datasheet": {
        "url": "https://www.ti.com/lit/ds/symlink/sn6507-q1.pdf",
        "pages": 44,
        "sha256": "750f94554cd548d8",
        "source_tier": "mfr"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "model_3d_generated": {
        "generator": "factory/gen_pkg3d.py",
        "family": "HVSSOP",
        "height_mm": 1.0,
        "height_basis": "family nominal (no datasheet A read)",
        "standoff_mm": 0.1,
        "standoff_basis": "family nominal (no datasheet A1 read)",
        "lead_width_mm": 0.18,
        "lead_width_basis": "default: 0.6 x pad width across the lead, at most 0.45 x pitch 0.50 mm; a tab 0.9 x its width (no datasheet b read)",
        "lead_thickness_mm": 0.105,
        "lead_thickness_basis": "default for pitch 0.50 mm, height 1 mm (no datasheet c read)"
      },
      "pins": {
        "total": 11,
        "described": 11,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "sn6507dgqrq1.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          4.91,
          3.0,
          1.0
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "c685a69b235fa064588610a3e11b50076b413299aeaa504489376b075eae2f7a",
        "checked": "2026-11-10",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "sn6507dgqrq1-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          4.91,
          3.0,
          1.0
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "86e811166e505fd1e42db5e4a450cd8e3609a6d7287015ebd4140dbf9b0e1676",
        "checked": "2026-11-10",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ],
    "package_dims": {
      "package_code": "DGQ",
      "source_page": 35,
      "D": {
        "nom_mm": 3.0,
        "range_mm": [
          2.9,
          3.1
        ]
      },
      "E1": {
        "nom_mm": 3.0,
        "range_mm": [
          2.9,
          3.1
        ]
      },
      "E": {
        "nom_mm": 4.9,
        "range_mm": [
          4.75,
          5.05
        ]
      },
      "e": {
        "nom_mm": 0.5,
        "range_mm": [
          null,
          null
        ]
      },
      "A": {
        "nom_mm": 1.1,
        "range_mm": [
          null,
          1.1
        ]
      },
      "source": "datasheet package drawing, every number found on its page (extract_pins --task dims)",
      "model_check": {
        "file": "sn6507dgqrq1.step",
        "verdict": "PASS",
        "reasons": [
          "height and body within the datasheet's package drawing"
        ],
        "by": "factory/package_fit.py"
      }
    }
  }
}