← Commit history

Initial commit: component/sn6507dgqr

Ray ·59637859d5 ·
2 files changed +207
README.mdadded+48
@@ -0,0 +1,48 @@+# SN6507DGQR++**Texas Instruments** · Power Management - Specialized · MSOP-10-EP++SN6507DGQR from Texas Instruments, in a MSOP-10-EP. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | SW1 | output | Open-drain output for first power MOSFET switch with 0.5A typical and 1.6A peak output current, typically connected to center-tapped transformer external terminal. |+| 2 | GND | power_in | Ground connection for internal control circuits and power MOSFET; must be shorted to pin 9 on PCB for optimal emission and efficiency. |+| 3 | VCC | power_in | Power supply input pin for control and analog circuits with operating range 3V to 36V and maximum absolute rating of 60V. |+| 4 | EN/UVLO | input | Enable input and programmable under-voltage lockout (UVLO) pin; device enabled when pin voltage exceeds 1.5V (typical rising threshold) and VCC exceeds 2.8V (typical). |+| 5 | DC | input | Duty cycle control input for line regulation; external resistor adjusts duty cycle to compensate input variations up to ±35% for maintaining constant output voltage. |+| 6 | SR | input | Slew rate control input for SW1 and SW2 edge rate; external resistor adjusts slew rate from 198 V/µs to 583 V/µs depending on VCC and resistor selection. |+| 7 | CLK | input | Clock input for external synchronization or programmable switching frequency from 100 kHz to 2 MHz via external resistor, or short to GND for default 1MHz. |+| 8 | SS/ILIM | input | Soft start and current limit control input; external capacitor (0.05-10µF) sets soft start time and external resistor (18-261kΩ) sets current limit from 100mA to 1.59A. |+| 9 | GND | power_in | Ground connection for internal control circuits and power MOSFET; must be shorted to pin 2 on PCB for optimal emission and efficiency. |+| 10 | SW2 | output | Open-drain output for second power MOSFET switch with 0.5A typical and 1.6A peak output current, typically connected to center-tapped transformer external terminal. |+| 11 | PowerPAD | power_in | Thermal pad for ground and power dissipation; GND pins (2 and 9) must be electrically connected to ground plane on PCB for proper operation and thermal performance. |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | Texas Instruments |+| Package | MSOP-10-EP |+| Category | Power Management (PMIC) |+| Pins | 11 |++## CAD (KiCad official)++- Symbol: `SN6507DGQR`+- Footprint: `Package_SO:MSOP-10-1EP_3x3mm_P0.5mm_EP1.68x1.88mm`+- 3D model: MSOP-10-EP (KiCad packages3D, STEP)+- 3D model files: `sn6507dgqr-etched.step` / `sn6507dgqr-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `sn6507dgqr.step` / `sn6507dgqr.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/cn/lit/ds/symlink/sn6507.pdf) (42 pp, sha256 `a964bdb06e3794dc`, retrieved 2026-09-24, tier: lcsc)+- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.2`, primary `claude-haiku-4-5-20251001` (text), consensus `claude-sonnet-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/sn6507dgqr-datasheet.pdf)
page.jsonadded+159
@@ -0,0 +1,159 @@+{+  "slug": "sn6507dgqr",+  "version": "0.1.0",+  "type": "component",+  "description": "Texas Instruments Power Management - Specialized, MSOP-10-EP. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",+  "tags": [+    "component",+    "power management (pmic)",+    "sn6507dgqr",+    "factory-2.0.0",+    "extractor-text"+  ],+  "dependencies": {},+  "hero": {+    "type": "image",+    "path": "docs/hero.png"+  },+  "files": [+    "page.json",+    "README.md",+    "sn6507dgqr.kicad_sym",+    "sn6507dgqr.kicad_mod",+    "sn6507dgqr.glb",+    "sn6507dgqr.step",+    "sn6507dgqr.lbr",+    "docs/hero.png",+    "docs/sn6507dgqr-datasheet.pdf",+    "viewers/symbol.html",+    "viewers/footprint.html"+  ],+  "component": {+    "mpn": "SN6507DGQR",+    "manufacturer": "Texas Instruments",+    "package": "MSOP-10-EP",+    "pin_count": 11,+    "category": "Power Management (PMIC)",+    "subcategory": "Power Management - Specialized",+    "datasheet": "https://www.ti.com/cn/lit/ds/symlink/sn6507.pdf",+    "parts": {+      "symbol": "sn6507dgqr.kicad_sym",+      "footprint": "sn6507dgqr.kicad_mod",+      "model_3d": "sn6507dgqr-etched.glb",+      "model_3d_plain": "sn6507dgqr.glb",+      "model_3d_step": "sn6507dgqr-etched.step",+      "model_3d_step_plain": "sn6507dgqr.step",+      "lbr": "sn6507dgqr.lbr"+    },+    "distributor_links": {+      "lcsc": "C5122398"+    },+    "pins": [+      {+        "number": "1",+        "name": "SW1",+        "type": "output",+        "description": "Open-drain output for first power MOSFET switch with 0.5A typical and 1.6A peak output current, typically connected to center-tapped transformer external terminal."+      },+      {+        "number": "2",+        "name": "GND",+        "type": "power_in",+        "description": "Ground connection for internal control circuits and power MOSFET; must be shorted to pin 9 on PCB for optimal emission and efficiency."+      },+      {+        "number": "3",+        "name": "VCC",+        "type": "power_in",+        "description": "Power supply input pin for control and analog circuits with operating range 3V to 36V and maximum absolute rating of 60V."+      },+      {+        "number": "4",+        "name": "EN/UVLO",+        "type": "input",+        "description": "Enable input and programmable under-voltage lockout (UVLO) pin; device enabled when pin voltage exceeds 1.5V (typical rising threshold) and VCC exceeds 2.8V (typical)."+      },+      {+        "number": "5",+        "name": "DC",+        "type": "input",+        "description": "Duty cycle control input for line regulation; external resistor adjusts duty cycle to compensate input variations up to ±35% for maintaining constant output voltage."+      },+      {+        "number": "6",+        "name": "SR",+        "type": "input",+        "description": "Slew rate control input for SW1 and SW2 edge rate; external resistor adjusts slew rate from 198 V/µs to 583 V/µs depending on VCC and resistor selection."+      },+      {+        "number": "7",+        "name": "CLK",+        "type": "input",+        "description": "Clock input for external synchronization or programmable switching frequency from 100 kHz to 2 MHz via external resistor, or short to GND for default 1MHz."+      },+      {+        "number": "8",+        "name": "SS/ILIM",+        "type": "input",+        "description": "Soft start and current limit control input; external capacitor (0.05-10µF) sets soft start time and external resistor (18-261kΩ) sets current limit from 100mA to 1.59A."+      },+      {+        "number": "9",+        "name": "GND",+        "type": "power_in",+        "description": "Ground connection for internal control circuits and power MOSFET; must be shorted to pin 2 on PCB for optimal emission and efficiency."+      },+      {+        "number": "10",+        "name": "SW2",+        "type": "output",+        "description": "Open-drain output for second power MOSFET switch with 0.5A typical and 1.6A peak output current, typically connected to center-tapped transformer external terminal."+      },+      {+        "number": "11",+        "name": "PowerPAD",+        "type": "power_in",+        "description": "Thermal pad for ground and power dissipation; GND pins (2 and 9) must be electrically connected to ground plane on PCB for proper operation and thermal performance."+      }+    ],+    "provenance": {+      "extractor": "extract_pins 0.2",+      "factory_chain": {+        "factory": "2.0.0",+        "extractor": "extract_pins 0.2",+        "primary_model": "claude-haiku-4-5-20251001",+        "primary_mode": "text",+        "consensus_model": "claude-sonnet-5",+        "consensus": "agreed",+        "guards": "pin_guards 0.1: passed",+        "guard_notes": [],+        "pages_sent": 42,+        "cost_usd": 0.4271,+        "at": "2026-09-24T10:00:02"+      },+      "datasheet": {+        "url": "https://www.ti.com/cn/lit/ds/symlink/sn6507.pdf",+        "pages": 42,+        "sha256": "a964bdb06e3794dc",+        "source_tier": "lcsc"+      },+      "cad": "KiCad official (CC-BY-SA 4.0)",+      "pins": {+        "total": 11,+        "described": 11,+        "cites_pages": true,+        "refuses_to_fabricate": true+      }+    },+    "viewers": {+      "symbol": "viewers/symbol.html",+      "footprint": "viewers/footprint.html"+    }+  },+  "visibility": "public",+  "org": "adom",+  "author": {+    "name": "Ray",+    "email": "[email protected]"+  }+}\ No newline at end of file