SN3360GP05E

{
  "slug": "sn3360gp05e",
  "version": "0.1.0",
  "type": "component",
  "description": "ISSI Integrated Silicon Solution LED Drivers, SOT-89-5. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "led drivers",
    "sn3360gp05e",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "sn3360gp05e.kicad_sym",
    "sn3360gp05e.kicad_mod",
    "sn3360gp05e.glb",
    "sn3360gp05e.step",
    "sn3360gp05e.lbr",
    "docs/hero.png",
    "docs/sn3360gp05e-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "sn3360gp05e-hero.glb",
    "sn3360gp05e-hero.overlay.json",
    "sn3360gp05e-etched.glb"
  ],
  "component": {
    "mpn": "SN3360GP05E",
    "manufacturer": "ISSI Integrated Silicon Solution",
    "package": "SOT-89-5",
    "pin_count": 5,
    "category": "LED Drivers",
    "subcategory": "LED Drivers",
    "datasheet": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588884159633248256",
    "parts": {
      "symbol": "sn3360gp05e.kicad_sym",
      "footprint": "sn3360gp05e.kicad_mod",
      "model_3d": "sn3360gp05e-hero.glb",
      "model_3d_plain": "sn3360gp05e-etched.glb",
      "model_3d_step": "sn3360gp05e-etched.step",
      "model_3d_step_plain": "sn3360gp05e.step",
      "lbr": "sn3360gp05e.lbr"
    },
    "distributor_links": {
      "lcsc": "C336595"
    },
    "distributor_check": {
      "checked_at": "2026-10-18T03:28:16Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": null,
        "status": "no match"
      },
      "mouser": {
        "pn": null,
        "status": "no match"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "LX",
        "type": "output",
        "description": "Internal power switch drain that drives the inductor; the datasheet gives an LX absolute maximum voltage of -0.3V to +50V and a switch current absolute maximum of 1.5A."
      },
      {
        "number": "2",
        "name": "GND",
        "type": "power_in",
        "description": "Ground pin, which should be soldered directly to the board's ground plane to prevent ground bounce."
      },
      {
        "number": "3",
        "name": "ADJ",
        "type": "input",
        "description": "Multifunction on/off and dimming input: below 0.2V turns the output off, 0.3V to 1.2V gives 25% to 100% output current, and above 1.2V clamps at 100%, with an absolute maximum of +6V and an internal 500kΩ pull-up to VREF."
      },
      {
        "number": "4",
        "name": "ISENSE",
        "type": "input",
        "description": "Current-sense input; a resistor RS connected between VIN and ISENSE sets the nominal average output current as IOUTnom = 0.1/RS."
      },
      {
        "number": "5",
        "name": "VIN",
        "type": "power_in",
        "description": "Supply input from 6V to 40V, which requires a 0.1µF X7R capacitor to ground placed close to the pin."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: The datasheet lists a 'Thermal pad' (heat sink, connected to ground) on page 2 but prints no pin num; The pin table on page 2 is the only pinout source; the package drawing text shows only 'Pin 1' with "
        ],
        "pages_sent": 13,
        "cost_usd": 0.0493,
        "at": "2026-10-18T03:26:19"
      },
      "datasheet": {
        "url": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588884159633248256",
        "pages": 13,
        "sha256": "ff45b5296e063bc6",
        "source_tier": "lcsc"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 5,
        "described": 5,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "sn3360gp05e.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          5.2,
          4.5,
          1.5
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "5bf9133f79d12f58c4da043d3892ba5cec700de6f3255a5358e7ec3200be4733",
        "checked": "2026-10-18",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "sn3360gp05e-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          5.2,
          4.5,
          1.5
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "d2d131119cf53cb6e32ee7b77832007b3f62a7086767902a38010820f8d6c5c4",
        "checked": "2026-10-18",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  }
}