component
SN3350IP05E-01
Public Made by Adomby adom
ISSI Integrated Silicon Solution LED Drivers, SOT-89-5. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
main
SN3350IP05E-01
ISSI Integrated Silicon Solution · LED Drivers · SOT-89-5
SN3350IP05E-01 from ISSI Integrated Silicon Solution, in a SOT-89-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | LX | output | Drain of the internal power switch and the switching node of the buck converter; keep the PCB trace short, with LX voltage rated -0.3 V to +50 V and switch current rated 800 mA for SOT89-5 and SOP-8. |
| 2 | GND | power_in | Ground pin that should be soldered directly to the board's ground plane to prevent ground bounce. |
| 3 | ADJ | input | Multifunction dimming/enable pin: leave floating for nominal current (VADJ = VREF = 1.2 V); below 0.2 V the output turns off, 0.3 V to 1.2 V sets 25% to 100% of nominal current, PWM duty cycle sets current, values above 1.2 V clamp at 100%, and the absolute maximum input voltage is +6 V. |
| 4 | ISENSE | input | Current-sense pin; a resistor RS connected between VIN and ISENSE sets the nominal average output current IOUTnom = 0.1/RS, with RS greater than 0.13 Ω. |
| 5 | VIN | power_in | Input supply pin rated 6 V to 40 V, which requires a 1 µF or larger X7R capacitor to ground placed close to the pin. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | ISSI Integrated Silicon Solution |
| Package | SOT-89-5 |
| Category | LED Drivers |
| Pins | 5 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input voltage | VIN | 6 | 40 | V | 5 | ||
| Output-off quiescent current | IINQoff | 40 | 60 | 80 | μA | ADJ pin grounded | 5 |
| Output-on quiescent current | IINQon | 450 | 600 | μA | ADJ pin floating | 5 | |
| Current-sense threshold voltage (-01 variant) | VISENSE | 91 | 95 | 101 | mV | ADJ pin floating; ISENSE relative to VIN | 5 |
| Current-sense hysteresis | VSENSEHYS | -15 | 15 | % | 5 | ||
| ISENSE pin input current | ISENSE | 8 | 10 | μA | VSENSE = 0.1V | 5 | |
| ADJ analog dimming voltage range | VADJ | 0.3 | 1.2 | V | 5 | ||
| ADJ threshold voltage, chip off (ADJ falling) | VADJoff | 0.15 | 0.2 | 0.25 | V | ADJ voltage falling | 5 |
| ADJ threshold voltage, chip on (ADJ rising) | VADJon | 0.2 | 0.25 | 0.3 | V | ADJ voltage rising | 5 |
| LX on-resistance | RLX | 0.9 | 1.5 | Ω | 5 | ||
| ADJ internal pull-up resistor to VREF | RADJ | 500 | KΩ | 5 | |||
| ADJ input impedance tolerance | RADJ | -25 | 25 | % | 9 | ||
| Duty cycle range (recommended) | DLX | 0.3 | 0.7 | 0.9 | 6 | ||
| Recommended minimum LX on-time | TONmin | 200 | ns | LX switch on | 6 | ||
| Recommended minimum LX off-time | TOFFmin | 200 | ns | LX switch off | 6 | ||
| Recommended maximum operating frequency | fLXmax | 1 | MHz | 6 | |||
| Operating ambient temperature | TOP | -40 | 85 | °C | 5 | ||
| Input voltage (absolute maximum) | VIN | -0.3 | 50 | V | 5 | ||
| LX output voltage (absolute maximum) | VLX | -0.3 | 50 | V | 5 | ||
| ADJ pin input voltage (absolute maximum) | VADJ | -0.3 | 6 | V | 5 | ||
| Switch current (absolute maximum) | ILX | 800 | mA | SOT89-5 and SOP-8 package | 5 | ||
| Power dissipation | Ptot | 1.2 | W | SOT89-5 and SOP-8 package | 5 | ||
| Storage ambient temperature | TST | -55 | 150 | °C | 5 | ||
| Maximum junction temperature | Tj MAX | 150 | °C | 5 | |||
| ESD human body model | 2 | KV | Human body model | 5 | |||
| Thermal resistance, junction to ambient | RθJA | 45 | °C/W | SOT89-5 package | 5 |
CAD (KiCad official)
- Symbol:
SN3350IP05E-01 - Footprint:
Package_TO_SOT_SMD:SOT-89-5 - 3D model: SOT-89-5 (KiCad packages3D, STEP)
- 3D model files:
sn3350ip05e-01-etched.step/sn3350ip05e-01-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);sn3350ip05e-01.step/sn3350ip05e-01.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: ISSI Integrated Silicon Solution datasheet (18 pp, sha256
596d709799d2eaec, retrieved 2026-10-18, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# SN3350IP05E-01
**ISSI Integrated Silicon Solution** · LED Drivers · SOT-89-5
SN3350IP05E-01 from ISSI Integrated Silicon Solution, in a SOT-89-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | LX | output | Drain of the internal power switch and the switching node of the buck converter; keep the PCB trace short, with LX voltage rated -0.3 V to +50 V and switch current rated 800 mA for SOT89-5 and SOP-8. |
| 2 | GND | power_in | Ground pin that should be soldered directly to the board's ground plane to prevent ground bounce. |
| 3 | ADJ | input | Multifunction dimming/enable pin: leave floating for nominal current (VADJ = VREF = 1.2 V); below 0.2 V the output turns off, 0.3 V to 1.2 V sets 25% to 100% of nominal current, PWM duty cycle sets current, values above 1.2 V clamp at 100%, and the absolute maximum input voltage is +6 V. |
| 4 | ISENSE | input | Current-sense pin; a resistor RS connected between VIN and ISENSE sets the nominal average output current IOUTnom = 0.1/RS, with RS greater than 0.13 Ω. |
| 5 | VIN | power_in | Input supply pin rated 6 V to 40 V, which requires a 1 µF or larger X7R capacitor to ground placed close to the pin. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | ISSI Integrated Silicon Solution |
| Package | SOT-89-5 |
| Category | LED Drivers |
| Pins | 5 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input voltage | VIN | 6 | | 40 | V | | 5 |
| Output-off quiescent current | IINQoff | 40 | 60 | 80 | μA | ADJ pin grounded | 5 |
| Output-on quiescent current | IINQon | 450 | | 600 | μA | ADJ pin floating | 5 |
| Current-sense threshold voltage (-01 variant) | VISENSE | 91 | 95 | 101 | mV | ADJ pin floating; ISENSE relative to VIN | 5 |
| Current-sense hysteresis | VSENSEHYS | -15 | | 15 | % | | 5 |
| ISENSE pin input current | ISENSE | 8 | | 10 | μA | VSENSE = 0.1V | 5 |
| ADJ analog dimming voltage range | VADJ | 0.3 | | 1.2 | V | | 5 |
| ADJ threshold voltage, chip off (ADJ falling) | VADJoff | 0.15 | 0.2 | 0.25 | V | ADJ voltage falling | 5 |
| ADJ threshold voltage, chip on (ADJ rising) | VADJon | 0.2 | 0.25 | 0.3 | V | ADJ voltage rising | 5 |
| LX on-resistance | RLX | 0.9 | | 1.5 | Ω | | 5 |
| ADJ internal pull-up resistor to VREF | RADJ | | 500 | | KΩ | | 5 |
| ADJ input impedance tolerance | RADJ | -25 | | 25 | % | | 9 |
| Duty cycle range (recommended) | DLX | 0.3 | 0.7 | 0.9 | | | 6 |
| Recommended minimum LX on-time | TONmin | 200 | | | ns | LX switch on | 6 |
| Recommended minimum LX off-time | TOFFmin | 200 | | | ns | LX switch off | 6 |
| Recommended maximum operating frequency | fLXmax | | | 1 | MHz | | 6 |
| Operating ambient temperature | TOP | -40 | | 85 | °C | | 5 |
| Input voltage (absolute maximum) | VIN | -0.3 | | 50 | V | | 5 |
| LX output voltage (absolute maximum) | VLX | -0.3 | | 50 | V | | 5 |
| ADJ pin input voltage (absolute maximum) | VADJ | -0.3 | | 6 | V | | 5 |
| Switch current (absolute maximum) | ILX | | | 800 | mA | SOT89-5 and SOP-8 package | 5 |
| Power dissipation | Ptot | | | 1.2 | W | SOT89-5 and SOP-8 package | 5 |
| Storage ambient temperature | TST | -55 | | 150 | °C | | 5 |
| Maximum junction temperature | Tj MAX | | | 150 | °C | | 5 |
| ESD human body model | | | | 2 | KV | Human body model | 5 |
| Thermal resistance, junction to ambient | RθJA | | | 45 | °C/W | SOT89-5 package | 5 |
## CAD (KiCad official)
- Symbol: `SN3350IP05E-01`
- Footprint: `Package_TO_SOT_SMD:SOT-89-5`
- 3D model: SOT-89-5 (KiCad packages3D, STEP)
- 3D model files: `sn3350ip05e-01-etched.step` / `sn3350ip05e-01-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `sn3350ip05e-01.step` / `sn3350ip05e-01.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [ISSI Integrated Silicon Solution datasheet](https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588911219654995968) (18 pp, sha256 `596d709799d2eaec`, retrieved 2026-10-18, tier: lcsc)
- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/sn3350ip05e-01-datasheet.pdf)