component
SMF9.0A
Public Made by Adomby adom
hongjiacheng ESD And Surge Protection (TVS/ESD), SOD-123FL. Unpolarised two-terminal part: the datasheet prints no pin numbers, so pins 1 and 2 follow the library convention, KiCad symbol/footprint/3D.
main
SMF9.0A
hongjiacheng · ESD And Surge Protection (TVS/ESD) · SOD-123FL
SMF9.0A from hongjiacheng, in a SOD-123FL. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | K | passive | Cathode: the banded/marked end per the datasheet; pad 1 of the KiCad diode footprint. |
| 2 | A | passive | Anode. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | hongjiacheng |
| Package | SOD-123FL |
| Category | Circuit Protection |
| Pins | 2 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Peak Pulse Power Dissipation (10/1000µs waveform) | PPPM | 200 | W | 10/1000µs waveform (Fig.1)(Note 1),(Note 2) | 1 | ||
| Power Dissipation on Infinite Heat Sink | PM(AV) | 0.4 | W | TL=75°C | 1 | ||
| Peak Forward Surge Current | IFSM | 30 | A | 8.3ms Single Half Sine Wave (Note 3) | 1 | ||
| Maximum Instantaneous Forward Voltage | VF | 3.5 | V | at 25A for Unidirectional Only (Note 4) | 1 | ||
| Operating junction and Storage Temperature Range | TJ, TSTG | -55 | 150 | ℃ | 1 | ||
| Breakdown Voltage (SMF9.0A) | VBR | 10 | 11.1 | V | @IT = 1 mA (Test Current) | 2 | |
| Maximum Clamping Voltage (SMF9.0A) | VC | 15.4 | V | @IPP = 13.0 A, 10/1000µs waveform | 2 | ||
| Peak Pulse Current (SMF9.0A) | IPP | 13 | A | Peak pulse current listed alongside VC | 2 | ||
| Reverse Leakage Current (SMF9.0A) | IR | 5 | µA | @VRWM | 2 | ||
| Maximum Temperature Coefficient of VBR | ΔVBR | 0.1 | % | Typical maximum; ΔVBR = 0.1% × VBR@25℃ × ΔT (series-wide statement) | 1 | ||
| Reverse Stand-Off Voltage (SMF9.0A) | VRWM | 9 | V | Unidirectional SMF9.0A | 2 | ||
| Typical Thermal Resistance Junction to Lead | RθJ-L | 100 | ℃/W | Typical | 1 | ||
| Typical Thermal Resistance Junction to Ambient | RθJ-A | 220 | ℃/W | Mounted on 5.0mm x 5.0mm (0.03mm thick) Copper Pads to each terminal (Note 2) | 1 |
Materials and finish
As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| contacts | tin | •Matte tin lead-free Plated •Halogen free and RoHS compliant | 1 |
CAD (KiCad official)
- Symbol:
SMF9.0A - Footprint:
Diode_SMD:D_SOD-123F - 3D model: SOD-123FL (KiCad packages3D, STEP)
- 3D model files:
smf9-0a-etched.step/smf9-0a-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);smf9-0a.step/smf9-0a.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: hongjiacheng datasheet (5 pp, sha256
c8f137df222c1c36, retrieved 2026-10-21, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins, primarycathode-band convention(convention), consensusoff(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# SMF9.0A
**hongjiacheng** · ESD And Surge Protection (TVS/ESD) · SOD-123FL
SMF9.0A from hongjiacheng, in a SOD-123FL. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | K | passive | Cathode: the banded/marked end per the datasheet; pad 1 of the KiCad diode footprint. |
| 2 | A | passive | Anode. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | hongjiacheng |
| Package | SOD-123FL |
| Category | Circuit Protection |
| Pins | 2 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Peak Pulse Power Dissipation (10/1000µs waveform) | PPPM | | | 200 | W | 10/1000µs waveform (Fig.1)(Note 1),(Note 2) | 1 |
| Power Dissipation on Infinite Heat Sink | PM(AV) | | | 0.4 | W | TL=75°C | 1 |
| Peak Forward Surge Current | IFSM | | | 30 | A | 8.3ms Single Half Sine Wave (Note 3) | 1 |
| Maximum Instantaneous Forward Voltage | VF | | | 3.5 | V | at 25A for Unidirectional Only (Note 4) | 1 |
| Operating junction and Storage Temperature Range | TJ, TSTG | -55 | | 150 | ℃ | | 1 |
| Breakdown Voltage (SMF9.0A) | VBR | 10 | | 11.1 | V | @IT = 1 mA (Test Current) | 2 |
| Maximum Clamping Voltage (SMF9.0A) | VC | | | 15.4 | V | @IPP = 13.0 A, 10/1000µs waveform | 2 |
| Peak Pulse Current (SMF9.0A) | IPP | | | 13 | A | Peak pulse current listed alongside VC | 2 |
| Reverse Leakage Current (SMF9.0A) | IR | | | 5 | µA | @VRWM | 2 |
| Maximum Temperature Coefficient of VBR | ΔVBR | | | 0.1 | % | Typical maximum; ΔVBR = 0.1% × VBR@25℃ × ΔT (series-wide statement) | 1 |
| Reverse Stand-Off Voltage (SMF9.0A) | VRWM | | 9 | | V | Unidirectional SMF9.0A | 2 |
| Typical Thermal Resistance Junction to Lead | RθJ-L | | 100 | | ℃/W | Typical | 1 |
| Typical Thermal Resistance Junction to Ambient | RθJ-A | | 220 | | ℃/W | Mounted on 5.0mm x 5.0mm (0.03mm thick) Copper Pads to each terminal (Note 2) | 1 |
## Materials and finish
As the datasheet states them (page.json `metadata.appearance`; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| contacts | | tin | •Matte tin lead-free Plated •Halogen free and RoHS compliant | 1 |
## CAD (KiCad official)
- Symbol: `SMF9.0A`
- Footprint: `Diode_SMD:D_SOD-123F`
- 3D model: SOD-123FL (KiCad packages3D, STEP)
- 3D model files: `smf9-0a-etched.step` / `smf9-0a-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `smf9-0a.step` / `smf9-0a.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [hongjiacheng datasheet](docs/smf9-0a-datasheet.pdf) (5 pp, sha256 `c8f137df222c1c36`, retrieved 2026-10-21, tier: lcsc)
- **Extractor:** parts-factory `2.0.0` / `extract_pins`, primary `cathode-band convention` (convention), consensus `off` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/smf9-0a-datasheet.pdf)