component
SMF36A CP
Public Made by Adomby adom
JUXING ESD And Surge Protection (TVS/ESD), SOD-123FL. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
main
SMF36A CP
JUXING · ESD And Surge Protection (TVS/ESD) · SOD-123FL
SMF36A CP from JUXING, in a SOD-123FL. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | Cathode | passive | Cathode of the unidirectional TVS diode (SMF36A), connected to the protected line; 200 W peak pulse power on 10/1000 us waveform. |
| 2 | Anode | passive | Anode of the unidirectional TVS diode, normally connected to ground/return. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | JUXING |
| Package | SOD-123FL |
| Category | Circuit Protection |
| Pins | 2 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Reverse Breakdown Voltage | VBR | 40 | 44.2 | V | @ IT = 1 mA | 2 | |
| Reverse Stand-off Voltage | VRWM | 36 | V | 2 | |||
| Reverse Leakage Current | IR | 1 | µA | @ VRWM | 2 | ||
| Maximum Clamping Voltage | VC | 58.1 | V | @ IPP = 3.4 A | 2 | ||
| Peak Pulse Current | IPP | 3.4 | A | 10/1000 us waveform | 2 | ||
| Test Current | IT | 1 | mA | 2 | |||
| Peak Pulse Power Dissipation | PPPM | 200 | W | TA=25°C, 10/1000us | 1 | ||
| Peak Forward Surge Current | IFSM | 20 | A | 8.3ms single half sinewave, UNI | 1 | ||
| Steady State Power Dissipation | PM(AV) | 1 | W | TL=75°C | 1 | ||
| Operating Junction and Storage Temperature Range | TJ,TSTG | -55 | 150 | °C | 1 | ||
| Typical Thermal Resistance | RθJA | 180 | °C/W | 1 |
Materials and finish
As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| contacts | copper | 2. Mounted on 5mm copper pads to each terminal | 1 |
CAD (KiCad official)
- Symbol:
SMF36A CP - Footprint:
Diode_SMD:D_SOD-123F - 3D model: SOD-123FL (KiCad packages3D, STEP)
- 3D model files:
smf36a-cp-etched.step/smf36a-cp-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);smf36a-cp.step/smf36a-cp.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: JUXING datasheet (4 pp, sha256
3b5a2aa506e6a0b2, retrieved 2026-10-22, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# SMF36A CP
**JUXING** · ESD And Surge Protection (TVS/ESD) · SOD-123FL
SMF36A CP from JUXING, in a SOD-123FL. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | Cathode | passive | Cathode of the unidirectional TVS diode (SMF36A), connected to the protected line; 200 W peak pulse power on 10/1000 us waveform. |
| 2 | Anode | passive | Anode of the unidirectional TVS diode, normally connected to ground/return. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | JUXING |
| Package | SOD-123FL |
| Category | Circuit Protection |
| Pins | 2 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Reverse Breakdown Voltage | VBR | 40 | | 44.2 | V | @ IT = 1 mA | 2 |
| Reverse Stand-off Voltage | VRWM | | 36 | | V | | 2 |
| Reverse Leakage Current | IR | | | 1 | µA | @ VRWM | 2 |
| Maximum Clamping Voltage | VC | | | 58.1 | V | @ IPP = 3.4 A | 2 |
| Peak Pulse Current | IPP | | | 3.4 | A | 10/1000 us waveform | 2 |
| Test Current | IT | | 1 | | mA | | 2 |
| Peak Pulse Power Dissipation | PPPM | | | 200 | W | TA=25°C, 10/1000us | 1 |
| Peak Forward Surge Current | IFSM | | | 20 | A | 8.3ms single half sinewave, UNI | 1 |
| Steady State Power Dissipation | PM(AV) | | | 1 | W | TL=75°C | 1 |
| Operating Junction and Storage Temperature Range | TJ,TSTG | -55 | | 150 | °C | | 1 |
| Typical Thermal Resistance | RθJA | | 180 | | °C/W | | 1 |
## Materials and finish
As the datasheet states them (page.json `metadata.appearance`; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| contacts | copper | | 2. Mounted on 5mm copper pads to each terminal | 1 |
## CAD (KiCad official)
- Symbol: `SMF36A CP`
- Footprint: `Diode_SMD:D_SOD-123F`
- 3D model: SOD-123FL (KiCad packages3D, STEP)
- 3D model files: `smf36a-cp-etched.step` / `smf36a-cp-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `smf36a-cp.step` / `smf36a-cp.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [JUXING datasheet](docs/smf36a-cp-datasheet.pdf) (4 pp, sha256 `3b5a2aa506e6a0b2`, retrieved 2026-10-22, tier: lcsc)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-sonnet-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/smf36a-cp-datasheet.pdf)