main
Ray
Publish 0.1.0
7d92607
SMD1812B075TF
Brightking · Resettable Fuses · 1812
SMD1812B075TF from Brightking, in a 1812. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | 1 | passive | Terminal 1 of an unpolarised fuse; either orientation. |
| 2 | 2 | passive | Terminal 2 of an unpolarised fuse; either orientation. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Brightking |
| Package | 1812 |
| Category | Circuit Protection |
| Pins | 2 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Trip current | Itrip | 1.5 | A | minimum current at which device trips, 23°C still air | 1 | ||
| Maximum voltage | Vmax | 13.2 | Vdc | at rated current Imax | 1 | ||
| Maximum fault current | Imax | 100 | A | at rated voltage Vmax | 1 | ||
| Maximum time to trip | 0.2 | Sec. | at 8.00 A | 1 | |||
| Minimum resistance | Rmin | 0.1 | Ω | initial (un-soldered) state | 1 | ||
| Operating temperature | -40 | 85 | °C | Operating / Storage temperature | 9 | ||
| Maximum device surface temperature in tripped state | 125 | °C | 9 | ||||
| Hold current | Ihold | 0.75 | A | 23°C still air | 1 | ||
| Power dissipation in tripped state | Pd | 0.8 | W | typical, tripped state, 23°C still air | 1 | ||
| Recommended hold current at -40°C | Ihold | 1.15 | A | ambient -40°C | 4 | ||
| Recommended hold current at 85°C | Ihold | 0.43 | A | ambient 85°C | 4 |
Materials and finish
As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| contacts | Copper | tin | Terminal Material Solder-Plated Copper (Solder Material: Matte Tin (Sn)) | 10 |
CAD (KiCad official)
- Symbol:
SMD1812B075TF - Footprint:
Fuse:Fuse_1812_4532Metric - 3D model: 1812, generated on the KiCad land (body 4.5 x 3.2 mm, terminals on the pads, 0.9 mm tall, family nominal (no datasheet A read)). Neither the vendor nor KiCad ships a 3D model for this package, so the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Brightking datasheet (11 pp, sha256
6e71930a62dae12f, retrieved 2026-11-16, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins, primarytwo-terminal convention(convention), consensusoff(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# SMD1812B075TF
**Brightking** · Resettable Fuses · 1812
SMD1812B075TF from Brightking, in a 1812. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | 1 | passive | Terminal 1 of an unpolarised fuse; either orientation. |
| 2 | 2 | passive | Terminal 2 of an unpolarised fuse; either orientation. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Brightking |
| Package | 1812 |
| Category | Circuit Protection |
| Pins | 2 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Trip current | Itrip | 1.5 | | | A | minimum current at which device trips, 23°C still air | 1 |
| Maximum voltage | Vmax | | | 13.2 | Vdc | at rated current Imax | 1 |
| Maximum fault current | Imax | | | 100 | A | at rated voltage Vmax | 1 |
| Maximum time to trip | | | | 0.2 | Sec. | at 8.00 A | 1 |
| Minimum resistance | Rmin | 0.1 | | | Ω | initial (un-soldered) state | 1 |
| Operating temperature | | -40 | | 85 | °C | Operating / Storage temperature | 9 |
| Maximum device surface temperature in tripped state | | | | 125 | °C | | 9 |
| Hold current | Ihold | | 0.75 | | A | 23°C still air | 1 |
| Power dissipation in tripped state | Pd | | 0.8 | | W | typical, tripped state, 23°C still air | 1 |
| Recommended hold current at -40°C | Ihold | | 1.15 | | A | ambient -40°C | 4 |
| Recommended hold current at 85°C | Ihold | | 0.43 | | A | ambient 85°C | 4 |
## Materials and finish
As the datasheet states them (page.json `metadata.appearance`; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| contacts | Copper | tin | Terminal Material Solder-Plated Copper (Solder Material: Matte Tin (Sn)) | 10 |
## CAD (KiCad official)
- Symbol: `SMD1812B075TF`
- Footprint: `Fuse:Fuse_1812_4532Metric`
- 3D model: 1812, generated on the KiCad land (body 4.5 x 3.2 mm, terminals on the pads, 0.9 mm tall, family nominal (no datasheet A read)). Neither the vendor nor KiCad ships a 3D model for this package, so the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Brightking datasheet](docs/smd1812b075tf-24-datasheet.pdf) (11 pp, sha256 `6e71930a62dae12f`, retrieved 2026-11-16, tier: lcsc)
- **Extractor:** parts-factory `2.0.0` / `extract_pins`, primary `two-terminal convention` (convention), consensus `off` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/smd1812b075tf-24-datasheet.pdf)