component
SMAJ6.0AJ
Public Made by Adomby adom
WeEn Semiconductors ESD And Surge Protection (TVS/ESD), SMA(DO-214AC). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
main
SMAJ6.0AJ
WeEn Semiconductors · ESD And Surge Protection (TVS/ESD) · SMA(DO-214AC)
SMAJ6.0AJ from WeEn Semiconductors, in a SMA(DO-214AC). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | K | passive | Cathode of the uni-directional TVS (cathode band side), connected to the protected line, which clamps at VC max 10.3 V at Ipp 38.8 A with VR 6 V and VBR 6.8-7.32 V. |
| 2 | A | passive | Anode of the uni-directional TVS, normally connected to ground or return, and forward-conducting with VF 3.5 V at IF = 35 A. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | WeEn Semiconductors |
| Package | SMA(DO-214AC) |
| Category | Circuit Protection |
| Pins | 2 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Breakdown voltage | VBR | 6.8 | 7.32 | V | @ IT = 10 mA | 2 | |
| Max clamping voltage | VC | 10.3 | V | @ Ipp = 38.8 A | 2 | ||
| Max peak pulse current | Ipp | 38.8 | A | 2 | |||
| Maximum reverse leakage | IR | 400 | μA | @ VR = 6 V | 2 | ||
| Test current | IT | 10 | mA | for VBR | 2 | ||
| Reverse stand-off voltage | VR | 6 | V | 2 | |||
| Peak pulse power | PPPM | 400 | W | 10/1000 μs current waveform, IEC 61643-321 | 1 | ||
| Steady state power dissipation | PM(AV) | 3.3 | W | on infinite heatsink at Ta = 50 °C | 1 | ||
| Peak forward surge current | IFSM | 60 | A | tp = 8.3 ms; single half sine-wave pulse; duty cycle = 4 pulses per minute maximum; unidirectional units only | 1 | ||
| Forward on-state voltage | VF | 3.5 | V | IF = 35 A; unidirectional units only | 1 | ||
| Storage temperature range | Tstg | -65 | 150 | °C | 1 | ||
| Operating temperature range | Tj | -65 | 150 | °C | 1 |
CAD (KiCad official)
- Symbol:
SMAJ6.0AJ - Footprint:
Diode_SMD:D_SMA - 3D model: SMA(DO-214AC) (KiCad packages3D, STEP)
- 3D model files:
smaj6-0aj-etched.step/smaj6-0aj-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);smaj6-0aj.step/smaj6-0aj.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: WeEn Semiconductors datasheet (7 pp, sha256
17c388c201e50792, retrieved 2026-10-23, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# SMAJ6.0AJ
**WeEn Semiconductors** · ESD And Surge Protection (TVS/ESD) · SMA(DO-214AC)
SMAJ6.0AJ from WeEn Semiconductors, in a SMA(DO-214AC). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | K | passive | Cathode of the uni-directional TVS (cathode band side), connected to the protected line, which clamps at VC max 10.3 V at Ipp 38.8 A with VR 6 V and VBR 6.8-7.32 V. |
| 2 | A | passive | Anode of the uni-directional TVS, normally connected to ground or return, and forward-conducting with VF 3.5 V at IF = 35 A. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | WeEn Semiconductors |
| Package | SMA(DO-214AC) |
| Category | Circuit Protection |
| Pins | 2 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Breakdown voltage | VBR | 6.8 | | 7.32 | V | @ IT = 10 mA | 2 |
| Max clamping voltage | VC | | | 10.3 | V | @ Ipp = 38.8 A | 2 |
| Max peak pulse current | Ipp | | | 38.8 | A | | 2 |
| Maximum reverse leakage | IR | | | 400 | μA | @ VR = 6 V | 2 |
| Test current | IT | | 10 | | mA | for VBR | 2 |
| Reverse stand-off voltage | VR | | 6 | | V | | 2 |
| Peak pulse power | PPPM | | | 400 | W | 10/1000 μs current waveform, IEC 61643-321 | 1 |
| Steady state power dissipation | PM(AV) | | | 3.3 | W | on infinite heatsink at Ta = 50 °C | 1 |
| Peak forward surge current | IFSM | | | 60 | A | tp = 8.3 ms; single half sine-wave pulse; duty cycle = 4 pulses per minute maximum; unidirectional units only | 1 |
| Forward on-state voltage | VF | | | 3.5 | V | IF = 35 A; unidirectional units only | 1 |
| Storage temperature range | Tstg | -65 | | 150 | °C | | 1 |
| Operating temperature range | Tj | -65 | | 150 | °C | | 1 |
## CAD (KiCad official)
- Symbol: `SMAJ6.0AJ`
- Footprint: `Diode_SMD:D_SMA`
- 3D model: SMA(DO-214AC) (KiCad packages3D, STEP)
- 3D model files: `smaj6-0aj-etched.step` / `smaj6-0aj-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `smaj6-0aj.step` / `smaj6-0aj.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [WeEn Semiconductors datasheet](docs/smaj6-0aj-datasheet.pdf) (7 pp, sha256 `17c388c201e50792`, retrieved 2026-10-23, tier: lcsc)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-sonnet-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/smaj6-0aj-datasheet.pdf)