component
SMAJ15CAT
Public Made by Adomby adom
Agertech TVS, SMA. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
Made with KiCad 10.0 · needs KiCad 10.0 or later to open · KiCad file format 20260206
| Name | Last updated |
|---|---|
| docs | 12d ago |
| viewers | 5d ago |
| package.json | 12d ago |
| page.json | 12d ago |
| README.md | 12d ago |
| smaj15cat-etched.glb | 12d ago |
| smaj15cat-etched.step | 12d ago |
| smaj15cat-hero.glb | 12d ago |
| smaj15cat-hero.overlay.json | 12d ago |
| smaj15cat.glb | 12d ago |
| smaj15cat.kicad_mod | 12d ago |
| smaj15cat.kicad_sym | 5d ago |
| smaj15cat.lbr | 5d ago |
| smaj15cat.step | 12d ago |
SMAJ15CAT
Agertech · TVS · SMA
SMAJ15CAT from Agertech, in a SMA. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | Cathode | passive | Cathode terminal of the SMA outline, listed as pin 1 in the PINNING table; the datasheet gives no separate voltage or current limit for this pin. |
| 2 | Anode | passive | Anode terminal of the SMA outline, listed as pin 2 in the PINNING table; the datasheet gives no separate voltage or current limit for this pin. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Agertech |
| Package | SMA |
| Category | TVS/Fuse/Board Level Protection |
| Pins | 2 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Breakdown voltage, minimum | VBR | 16.7 | V | @ IT (test current 1 mA), Table 1, bipolar SMAJ15CA column | 2 | ||
| Breakdown voltage, maximum | VBR | 18.5 | V | @ IT (test current 1 mA), Table 1, bipolar SMAJ15CA column | 2 | ||
| Reverse leakage current | IR | 1 | µA | @ VRRM (15 V), Table 1 | 2 | ||
| Maximum clamp voltage | VC | 24.4 | V | @ IPP (16.4 A), 10/1000 µs waveform, Table 1 | 2 | ||
| Peak pulse current | IPP | 16.4 | A | 10/1000 µs waveform, Table 1, bipolar SMAJ15CA column | 2 | ||
| Reverse stand-off voltage | VRRM | 15 | V | Table 1, bipolar SMAJ15CA column | 2 | ||
| Peak pulse power dissipation | PPPM | 400 | W | TA=25°C, 10/1000 µs waveform (Note 1,2,4, Fig 1) | 1 | ||
| ESD voltage per IEC61000-4-2, contact | VESD1 | 30 | kV | Contact discharge per IEC 61000-4-2 | 1 | ||
| ESD voltage per IEC61000-4-2, air | VESD2 | 30 | kV | Air discharge per IEC 61000-4-2 | 1 | ||
| Operating junction and storage temperature range | Tj, Tstg | -65 | 150 | °C | Operating junction temperature and storage temperature range | 1 | |
| Typical thermal resistance, junction to ambient | RθJA | 100 | °C/W | Mounted on 5 mm² copper pads to each terminal (Note 2) | 1 |
Materials and finish
As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| contacts | copper | 2 copper pads to each terminal. 3. Peak Forward Surge Current : 8.3ms single half sine-wave Superimposed on rated load (JEDEC method). 4. Peak pulse power waveform is 10/1000μS. | 1 |
CAD (KiCad official)
- Symbol:
SMAJ15CAT - Footprint:
Diode_SMD:D_SMA - 3D model: SMA (KiCad packages3D, STEP)
- 3D model files:
smaj15cat-etched.step/smaj15cat-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);smaj15cat.step/smaj15cat.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Agertech datasheet (4 pp, sha256
a2c72e24415df2dc, retrieved 2026-10-28, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).