Generated by kicad-footprint-generator · KiCad file format 20260206
SM3041-015-D-C-3-S
Silicon Microstructures(SMI) · Pressure Sensors · SOIC-16
SM3041-015-D-C-3-S from Silicon Microstructures(SMI), in a SOIC-16. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | NC | unconnected | No internal connection; do not connect to this pin. |
| 2 | NC | unconnected | No internal connection; do not connect to this pin. |
| 3 | NC | unconnected | No internal connection; do not connect to this pin. |
| 4 | NC | unconnected | No internal connection; do not connect to this pin. |
| 5 | NC | unconnected | No internal connection; do not connect to this pin. |
| 6 | GND | power_in | Ground reference for the sensor and its digital interface. |
| 7 | VDD | power_in | Supply voltage input; 3.0 V minimum, 3.3 V typical, 3.6 V maximum per the operating characteristics. |
| 8 | NC | unconnected | No internal connection; do not connect to this pin. |
| 9 | NC | unconnected | No internal connection; do not connect to this pin. |
| 10 | SDA | bidirectional | I2C serial data line for communication with the sensor; the datasheet states that a failing SDA edge is not allowed between the start condition and the first rising SCL edge. |
| 11 | SCL | input | I2C serial clock input; clock frequency must be 100 kHz to 400 kHz. |
| 12 | NC | unconnected | No internal connection; do not connect to this pin. |
| 13 | NC | unconnected | No internal connection; do not connect to this pin. |
| 14 | NC | unconnected | No internal connection; do not connect to this pin. |
| 15 | NC | unconnected | No internal connection; do not connect to this pin. |
| 16 | NC | unconnected | No internal connection; do not connect to this pin. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Silicon Microstructures(SMI) |
| Package | SOIC-16 |
| Category | Sensors |
| Pins | 16 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply Voltage | VDD | 0 | 6 | V | 2 | ||
| Supply Current | IDD | 0 | 2 | 4 | mA | 2 | |
| Operating Temperature | TOP | -20 | 85 | °C | 2 | ||
| Storage Temperature | TSTG | -40 | 125 | °C | 2 | ||
| Operating Pressure SM3041-015-D-C-3-S | -15 | 15 | PSI | 2 | |||
| Proof Pressure | PPROOF | 45 | PSI | 2 | |||
| Burst Pressure | PBURST | 75 | PSI | 2 | |||
| Supply Voltage | VDD | 3 | 3.3 | 3.6 | V | 2 | |
| Accuracy | ACC | -1 | 1 | %FS | Applies over all operating conditions (note b) | 2 | |
| Compensated Temperature Range | TCOMP | -20 | 85 | oC | 2 | ||
| Pressure Output @ PMIN | OUTMIN | 1638 | Counts | 2 | |||
| Pressure Output @ PMAX | OUTMAX | 14745 | Counts | 2 | |||
| Full Scale (PMIN to PMAX) Span | FSP | 13107 | Counts | 2 | |||
| Resolution | 14 | Bits | 2 | ||||
| SCL Clock Frequency | FSCL | 100 | 400 | kHz | 4 | ||
| Start Condition Hold Time Relative to SCL Edge | tHDSTA | 0.1 | µs | 4 | |||
| Minimum SCL Clock Low Width | tLOW | 0.6 | µs | 4 | |||
| Minimum SCL Clock High Width | tHIGH | 0.6 | µs | 4 | |||
| Start Condition Setup Time Relative to SCL Edge | tSUSTA | 0.1 | µs | 4 | |||
| Data Hold Time on SDA Relative to SCL Edge | tHIDDAT | 0 | µs | 4 | |||
| Data Setup Time on SDA Relative to SCL Edge | tSUDAT | 0.1 | µs | 4 | |||
| Stop Condition Setup Time on SCL | tSUSTO | 0.1 | µs | 4 | |||
| Bus Free Time Between Stop Condition and Start Condition | tBUS | 2 | µs | 4 |
CAD (KiCad official)
- Symbol:
SM3041-015-D-C-3-S - Footprint:
Package_SO:SOIC-16_3.9x9.9mm_P1.27mm - 3D model: SOIC-16 (KiCad packages3D, STEP)
- 3D model files:
sm3041-015-d-c-3-s-etched.step/sm3041-015-d-c-3-s-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);sm3041-015-d-c-3-s.step/sm3041-015-d-c-3-s.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Silicon Microstructures(SMI) datasheet (9 pp, sha256
5d5f8b41baa96d8b, retrieved 2026-10-28, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).