component
SLS32AIA010MLUSON10XTMC1
Public Made by Adomby adom
Infineon Technologies Security ICs, PG-USON-10-2. Pinout settled in review by an AI reviewer against the manufacturer's datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownSLS32AIA010MLUSON10XTMC1
Infineon Technologies · Security ICs · PG-USON-10-2
SLS32AIA010MLUSON10XTMC1 from Infineon Technologies, in a PG-USON-10-2. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). The symbol is generated from that pin table and the footprint is an Adom_Gen land derived from the manufacturer drawing; the 3D model is generated to fit it.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | GND | power_in | Supply voltage (Ground). |
| 2 | n.c. | no_connect | Not connected/Do not connect externally. Shall be left floating. |
| 3 | SDA | bidirectional | Serial Data Line (SDA), I/O. |
| 4 | n.c. | no_connect | Not connected/Do not connect externally. Shall be left floating. |
| 5 | n.c. | no_connect | Not connected/Do not connect externally. Shall be left floating. |
| 6 | n.c. | no_connect | Not connected/Do not connect externally. Shall be left floating. |
| 7 | n.c. | no_connect | Not connected/Do not connect externally. Shall be left floating. |
| 8 | SCL | bidirectional | Serial Clock Line (SCL), I/O. |
| 9 | RST | input | Active Low Reset (RST). This pin has a weak internal pull-up resistor. |
| 10 | VCC | power_in | Supply voltage (VCC). |
| 11 | EP | passive | Exposed pad, unnumbered in the datasheet (Figure 7: n.c.*). Connect the exposed pad with the copper area in the PCB to improve thermal dissipation. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Infineon Technologies |
| Package | PG-USON-10-2 |
| Category | Embedded Processors & Controllers |
| Pins | 11 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage | VCC_I2C | 1.62 | 5.5 | V | 18 | ||
| SDA, SCL input voltage | VIN_I2C | -0.3 | V | VCC_I2C is in the operational supply range | 18 | ||
| SDA, SCL input voltage | VIN_I2C | -0.3 | 5.5 | V | VCC_I2C is switched off | 18 | |
| SCL clock frequency (standard mode) | fSCL | 0 | 100 | kHz | 18 | ||
| Input low-level (standard mode) | VIL | -0.3 | V | 18 | |||
| Low-level output voltage (standard mode) | VOL1 | 0 | 0.4 | V | Sink current 3 mA; VCC_I2C ≥ 2.7 V | 18 | |
| Low-level output current (standard mode) | IOL | 3 | mA | VOL = 0.4 V; VCC_I2C ≥ 2.7 V | 18 | ||
| Low-level output current (standard mode) | IOL | 2 | mA | VOL = 0.4 V; VCC_I2C < 2.7 V | 18 | ||
| Output fall time (standard mode) | tOF | 250 | ns | Cb ≤ 400 pF; VCC_I2C ≥ 2.7 V | 18 | ||
| Capacitive load for each bus line (standard mode) | Cb | 400 | pF | VCC_I2C ≥ 2.7 V | 18 | ||
| Capacitive load for each bus line (standard mode) | Cb | 200 | pF | VCC_I2C < 2.7 V | 18 | ||
| SCL clock frequency (fast mode) | fSCL | 0 | 400 | kHz | 19 | ||
| Input low-level (fast mode) | VIL | -0.3 | V | 19 | |||
| Low-level output voltage (fast mode) | VOL1 | 0 | 0.4 | V | Sink current 3 mA; VCC_I2C ≥ 2.7 V | 19 | |
| Low-level output current (fast mode) | IOL | 3 | mA | VOL = 0.4 V; VCC_I2C ≥ 2.7 V | 19 | ||
| Low-level output current (fast mode) | IOL | 2 | mA | VOL = 0.4 V; VCC_I2C < 2.7 V | 19 | ||
| Output fall time (fast mode) | tOF | 250 | ns | Cb ≤ 400 pF; VCC_I2C ≥ 2.7 V | 19 | ||
| Capacitive load for each bus line (fast mode) | Cb | 15 | 400 | pF | VCC_I2C ≥ 2.7 V | 19 | |
| Capacitive load for each bus line (fast mode) | Cb | 15 | 200 | pF | VCC_I2C < 2.7 V | 19 | |
| SCL clock frequency (fast mode plus) | fSCL | 0 | 1000 | kHz | 19 | ||
| Input low-level (fast mode plus) | VIL | -0.3 | V | 19 | |||
| Low-level output voltage (fast mode plus) | VOL1 | 0 | 0.4 | V | Sink current 3 mA; VCC_I2C ≥ 2.7 V | 19 | |
| Low-level output current (fast mode plus) | IOL | 3 | mA | VOL = 0.4 V; VCC_I2C ≥ 2.7 V | 19 | ||
| Low-level output current (fast mode plus) | IOL | 2 | mA | VOL = 0.4 V; VCC_I2C < 2.7 V | 19 | ||
| Output fall time (fast mode plus) | tOF | 120 | ns | Cb ≤ 150 pF | 19 | ||
| Capacitive load for each bus line (fast mode plus) | Cb | 15 | 150 | pF | 19 | ||
| Overall supply voltage | VCC | 1.62 | 5.5 | V | Overall functional range | 20 | |
| Supply voltage for I2C operation | VCC_I2C | 1.62 | 5.5 | V | Supply voltage range for operation of I2C | 20 | |
| Supply current, in sleep mode | ICCS3 | 70 | 100 | μA | TA = 25°C; VCC_I2C = 3.3 V; I2C ready for operation (no bus activity), all other inputs at VCC, no other interface activity | 20 | |
| RST input low voltage | VIL | -0.3 | V | IIL = −50 μA to +20 μA | 20 | ||
| Hibernate current | 2.5 | µA | Vcc = 0 V, GND = 0 V, RST = 0 V, SCL= 3.3 V and SCL = 3.3 V | 20 | |||
| VCC rampup time | tVCCR | 1 | 1000 | μs | 400 mV to 90% of VCC target voltage ramp | 21 | |
| Startup time after power-on | tSTARTUP | 15 | ms | 22 | |||
| Startup time for warm resets | tSTARTUP | 15 | ms | 23 | |||
| Rise time | tR | 1 | μs | From 10% to 90% of signal amplitude | 23 | ||
| Fall time | tF | 1 | μs | From 10% to 90% of signal amplitude | 23 | ||
| Reset detection | t1 | 10 | μs | 23 | |||
| Reset low | 10 | 2500 | μs | 23 | |||
| Operating ambient temperature range (Extended Temperature Range, ETR) | TA | -40 | 105 | °C | Extended Temperature Range (ETR) | 8 |
CAD (Adom-generated)
- Symbol:
SLS32AIA010MLUSON10XTMC1 - Footprint:
Adom_Gen:Infineon_Technologies_SLS32_c9d1e7 - 3D model: generated to fit the land (STEP)
- 3D model files:
sls32aia010mluson10xtmc1-etched.step/sls32aia010mluson10xtmc1-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);sls32aia010mluson10xtmc1.step/sls32aia010mluson10xtmc1.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Infineon Technologies datasheet (45 pp, sha256
f9495234e67a7626, retrieved 2026-11-08, tier: manufacturer) - Extractor:
ds2sf(Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate. - CAD: symbol generated from the datasheet pin table; footprint an Adom_Gen land derived from the manufacturer drawing. 3D model generated to fit that land.