component
SLM6900
Public Made by Adomby adom
SOLA IC Battery Management, TSSOP-14. Pinout extracted from the datasheet, KiCad symbol/footprint/3D.
← Commit history
page.json+152−8@@ -1,13 +1,162 @@ {+ "schema_version": 1,+ "type": "component", "slug": "slm6900",+ "title": "SLM6900",+ "brief": "SOLA IC Battery Management, TSSOP-14. Datasheet-verified pinout, KiCad symbol/footprint/3D.", "version": "0.1.0",- "type": "component",- "description": "SOLA IC Battery Management, TSSOP-14. Datasheet-verified pinout, KiCad symbol/footprint/3D.",+ "license": "CC-BY-SA-4.0", "tags": [ "component", "pmic", "slm6900" ],+ "component": {+ "mpn": "SLM6900",+ "manufacturer": "SOLA IC",+ "package": "TSSOP-14",+ "pin_count": 14,+ "category": "PMIC",+ "subcategory": "Battery Management",+ "datasheet": "https://datasheet.lcsc.com/datasheet/pdf/a7875186c0c1007b6c91a0422d79fa0b.pdf",+ "parts": {+ "symbol": "slm6900.kicad_sym",+ "footprint": "slm6900.kicad_mod",+ "model_3d": "slm6900.glb",+ "model_3d_step": "slm6900.step",+ "lbr": "slm6900.lbr"+ },+ "distributor_links": {},+ "pins": [+ {+ "number": "1",+ "name": "DRV",+ "type": "output",+ "description": "External PMOS gate drive output. The voltage is clamped by GVC to VCC-6.3V (typ.), allowing a low-VGS PMOS to be used for improved efficiency and lower cost. Switches at the 300 kHz oscillator frequency."+ },+ {+ "number": "2",+ "name": "PVCC",+ "type": "power_in",+ "description": "Gate driver supply input. Supplies the DRV output stage; tied to VCC in typical applications."+ },+ {+ "number": "3",+ "name": "VCC",+ "type": "power_in",+ "description": "Chip supply input. Operating input supply range 6.8 V to 28 V (absolute max VIN 30 V continuous / 45 V inrush)."+ },+ {+ "number": "4",+ "name": "NCHRG",+ "type": "output",+ "description": "Open-drain charge status indicator (typically drives a red LED). Pulled low while charging is in progress (VNCHRG ~0.3 V typ at 5 mA), high-impedance otherwise. Pulses at 1-4 Hz when the battery is disconnected."+ },+ {+ "number": "5",+ "name": "NSTDBY",+ "type": "output",+ "description": "Open-drain charge-done status indicator (typically drives a green LED). Pulled low when the battery is fully charged (VNSTDBY ~0.3 V typ at 5 mA), high-impedance otherwise."+ },+ {+ "number": "6",+ "name": "NTC",+ "type": "input",+ "description": "Battery temperature detection input. Sources ~50 uA (45-55 uA) into an external NTC thermistor (10 k\u03a9 @ 25\u00b0C typical) referenced to GND. Suspends charging outside the 190 mV low / 1.46 V high thresholds. Leave floating or tie to VCC to disable; tying to GND disables charging."+ },+ {+ "number": "7",+ "name": "SEL",+ "type": "input",+ "description": "Battery output voltage select. Tie to GND for 3-cell mode (12.6 V float), tie to VCC for 4-cell mode (16.8 V float), or leave floating to use an external FB divider (VFB = 1.205 V reference)."+ },+ {+ "number": "8",+ "name": "COMP",+ "type": "passive",+ "description": "Loop stability compensation node. Connect a series R-C (e.g., 120 \u03a9 / 220 nF) to GND close to the IC."+ },+ {+ "number": "9",+ "name": "FB",+ "type": "input",+ "description": "Battery voltage feedback input. In SEL=GND/VCC modes an optional series resistor trims float voltage; when SEL is floating, FB regulates to 1.205 V and an external divider sets VFLOAT = 1.205 \u00d7 (R4+R5)/R5."+ },+ {+ "number": "10",+ "name": "ISN",+ "type": "input",+ "description": "Charge current sense negative input. Connect to the battery-side end of the current-sense resistor RS. In constant-current mode VS(ISP-ISN) = 120 mV; RS = 0.12/IBAT."+ },+ {+ "number": "11",+ "name": "ISP",+ "type": "input",+ "description": "Charge current sense positive input. Connect to the inductor/output-side end of RS. Kelvin-connect ISP/ISN directly across RS for best accuracy."+ },+ {+ "number": "12",+ "name": "GND",+ "type": "power_in",+ "description": "Small-signal (analog) ground. Return the COMP compensation capacitor here, close to the IC, to keep PGND switching noise off the control loop."+ },+ {+ "number": "13",+ "name": "PGND",+ "type": "power_in",+ "description": "Power ground / gate-driver return. Carries the PMOS gate-drive switching current; connect to the ground plane close to the input capacitor."+ },+ {+ "number": "14",+ "name": "GVC",+ "type": "passive",+ "description": "Gate voltage clamp node. A 100 nF capacitor from GVC to VCC clamps the external PMOS gate-drive swing to \u2265VCC-6.3 V, protecting low-VGS PMOS parts."+ }+ ],+ "provenance": {+ "extractor": "ds2sf",+ "datasheet": {+ "url": "https://datasheet.lcsc.com/datasheet/pdf/a7875186c0c1007b6c91a0422d79fa0b.pdf",+ "pages": 13,+ "sha256": "636f021dcac3bc22",+ "source_tier": "lcsc"+ },+ "cad": "KiCad official (CC-BY-SA 4.0)",+ "pins": {+ "total": 14,+ "described": 14,+ "cites_pages": true,+ "refuses_to_fabricate": true+ }+ },+ "viewers": {+ "symbol": "viewers/symbol.html",+ "footprint": "viewers/footprint.html"+ }+ },+ "metadata": {+ "specs": {+ "Manufacturer": "SOLA IC",+ "Package": "TSSOP-14",+ "Category": "PMIC",+ "Pins": "14"+ }+ },+ "sections": [+ "hero",+ "viewers",+ "readme",+ "breadcrumbs",+ "info"+ ],+ "discovery_triggers": [+ "slm6900"+ ],+ "discovery_pitch": "SLM6900 (SOLA IC) component page with datasheet-verified CAD.",+ "author": {+ "name": "Ray",+ "email": "[email protected]"+ }, "dependencies": {}, "hero": { "type": "image",@@ -25,10 +174,5 @@ "docs/slm6900-datasheet.pdf", "viewers/symbol.html", "viewers/footprint.html"- ],- "visibility": "public",- "author": {- "name": "Ray",- "email": "[email protected]"- }+ ] }