SLM6150

{
  "slug": "slm6150",
  "version": "0.1.0",
  "type": "component",
  "description": "SOLA-IC Battery Management ICs, SOP-8-EP. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "power management ics",
    "slm6150",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "slm6150.kicad_sym",
    "slm6150.kicad_mod",
    "slm6150.glb",
    "slm6150.step",
    "slm6150.lbr",
    "docs/hero.png",
    "docs/slm6150-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "slm6150-hero.glb",
    "slm6150-hero.overlay.json",
    "slm6150-etched.glb"
  ],
  "component": {
    "mpn": "SLM6150",
    "manufacturer": "SOLA-IC",
    "package": "SOP-8-EP",
    "pin_count": 9,
    "category": "Power Management ICs",
    "subcategory": "Battery Management ICs",
    "datasheet": "https://datasheet.lcsc.com/datasheet/pdf/853bbc05d0613804a9ab6ef4461a198f.pdf",
    "parts": {
      "symbol": "slm6150.kicad_sym",
      "footprint": "slm6150.kicad_mod",
      "model_3d": "slm6150-hero.glb",
      "model_3d_plain": "slm6150-etched.glb",
      "model_3d_step": "slm6150-etched.step",
      "model_3d_step_plain": "slm6150.step",
      "lbr": "slm6150.lbr"
    },
    "distributor_links": {
      "lcsc": "C130318"
    },
    "distributor_check": {
      "checked_at": "2026-10-22T20:43:11Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": null,
        "status": "quota"
      },
      "mouser": {
        "pn": null,
        "status": "quota"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "TEMP",
        "type": "input",
        "description": "Battery temperature sense input for the NTC sensor; charging is suspended if its voltage is below 45% or above 80% of VCC, and the function is disabled by grounding the pin."
      },
      {
        "number": "2",
        "name": "PROG",
        "type": "bidirectional",
        "description": "Charge current setting and monitor pin; a resistor RPROG to GND programs the current (IBAT=VPROG/RPROG*1330), with PROG regulated to 0.1V in pre-charge and 1V in constant-current mode."
      },
      {
        "number": "3",
        "name": "GND",
        "type": "power_in",
        "description": "Ground."
      },
      {
        "number": "4",
        "name": "VCC",
        "type": "power_in",
        "description": "Positive input supply voltage (4.0V to 8.0V operating) powering the internal circuit; the device enters low power mode when VCC drops within 30mV of the BAT voltage."
      },
      {
        "number": "5",
        "name": "BAT",
        "type": "power_out",
        "description": "Battery connection pin providing charge current and 4.2V regulation voltage, with BAT current below 2uA in disable or sleep mode."
      },
      {
        "number": "6",
        "name": "STDBY",
        "type": "output",
        "description": "Open-drain charge terminated status output that is pulled low by an internal switch when charging terminates and is otherwise high impedance (rated -0.3V to 10V)."
      },
      {
        "number": "7",
        "name": "CHRG",
        "type": "output",
        "description": "Open-drain charge status output that is pulled low by an internal switch while the battery is charging and is otherwise high impedance (rated -0.3V to 10V)."
      },
      {
        "number": "8",
        "name": "CE",
        "type": "input",
        "description": "Chip enable input where a high level (above 1.2V) selects normal operation and a low level (below 0.6V) puts the device in disable mode, driven by TTL or CMOS logic."
      },
      {
        "number": "9",
        "name": "EP",
        "type": "passive",
        "description": "Exposed pad (from the footprint; not named in the datasheet pin table)."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-sonnet-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: The datasheet packaging page shows an 8-Pin ESOP (exposed pad) package, but the extracted text does ; Pin types for PROG (analog current-set/monitor) and BAT (charge output that also senses the battery)"
        ],
        "pages_sent": 12,
        "cost_usd": 0.0942,
        "at": "2026-10-22T20:42:30"
      },
      "datasheet": {
        "url": "https://datasheet.lcsc.com/datasheet/pdf/853bbc05d0613804a9ab6ef4461a198f.pdf",
        "pages": 12,
        "sha256": "ef64c64924c518fe",
        "source_tier": "lcsc"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 9,
        "described": 9,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "slm6150.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6.0,
          4.9,
          1.55
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "2d6f7e774e8143e3320cbd59eb5be9f3b7864614644e3b072006e1eb05fb7fa6",
        "checked": "2026-10-22",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "slm6150-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6.0,
          4.9,
          1.55
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "2e022ddd0e6ae557af337f8321b7de7256bafd4177e39260ef0af1b722f6d6d4",
        "checked": "2026-10-22",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  }
}