main
History Download
Ray Publish 0.1.0 ae231f2

SLM27211CB-DG

Sillumin · Gate Drive ICs · SOP-8-EP

SLM27211CB-DG from Sillumin, in a SOP-8-EP. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 VDD power_in Positive supply to the lower-gate driver, decoupled to VSS (GND) with a typical capacitor range of 0.22 µF to 4.7 µF.
2 HB power_in High-side bootstrap supply, with an on-chip bootstrap diode and an external bootstrap capacitor typically 0.022 µF to 0.1 µF connected to this pin.
3 HO output High-side output, connected to the gate of the high-side power MOSFET.
4 HS power_in High-side source connection, connected to the source of the high-side power MOSFET and the negative side of the bootstrap capacitor.
5 HI input High-side input, assumed to be driven from a source impedance below 100 Ω; if the source impedance exceeds 100 Ω, a 1 nF to 10 nF bypass capacitor to VSS is recommended.
6 LI input Low-side input, assumed to be driven from a source impedance below 100 Ω; if the source impedance exceeds 100 Ω, a 1 nF to 10 nF bypass capacitor to VSS is recommended.
7 VSS power_in Negative supply terminal for the device that is generally grounded.
8 LO output Low-side output, connected to the gate of the low-side power MOSFET.
9 EP passive Exposed pad (from the footprint; not named in the datasheet pin table).

Key specifications

Parameter Value
Manufacturer Sillumin
Package SOP-8-EP
Category Power Supply Chip
Pins 9

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply voltage range, VDD, VHB, VHS VDD -0.3 20 V 5
Input voltages on LI and HI VLI, VHI -0.3 20 V 5
Output voltage on LO, repetitive pulse VLO -2 V Repetitive pulse < 100 ns 5
Voltage on HS, DC VHS -1 120 V 5
Voltage on HS, repetitive pulse VHS 120 V Repetitive pulse < 100 ns 5
Voltage on HB VHB -0.3 120 V 5
Operating virtual junction temperature range TJ -40 150 °C 5
Storage temperature TSTG -65 150 °C 5
ESD HBM VESD -2000 2000 V HBM 5
ESD CDM VESD -1000 1000 V CDM 5
Supply voltage range on VDD VDD 8 12 17 V 6
Voltage between HB and HS VBS 8 12 17 V 6
Voltage on HS VHS -1 105 V 6
Voltage on HS, repetitive pulse VHS 110 V Repetitive pulse < 100 ns 6
Voltage slew rate on HS 50 V/ns 6
Operating junction temperature TJ -40 125 °C 6
VDD quiescent current IDD 0.08 0.115 0.15 mA V(LI) = V(HI) = 0 V 7
VDD operation current IDDO 0.7 1 1.5 mA f = 500 kHz, CLOAD = 0 7
Boot voltage quiescent current IHB 0.07 0.095 0.12 mA V(LI) = V(HI) = 0 V 7
Boot voltage operating current IHBO 0.7 0.96 1.2 mA f = 500 kHz, CLOAD = 0 7
HB to VSS quiescent current IHBS 0.02 1 µA V(HS) = V(HB) = 115 V 7
HB to VSS operating current IHBSO 0.15 0.5 mA f = 500 kHz, CLOAD = 0 7
Input voltage threshold (high side) VHIT 1.9 2.3 2.6 V 7
Input voltage threshold (low side) VLIT 1.3 1.6 1.9 V 7
VDD turn on threshold VDDR 6.4 7 7.7 V 7
VHB turn on threshold VHBR 5.7 6.7 7.7 V 7
Low-current forward voltage VF 0.4 0.7 V IVDD-HB = 100 µA 7
High-current forward voltage VFI 0.82 0.95 V IVDD-HB = 100 mA 7
Dynamic resistance, ΔVF/ΔI RD 0.8 1 1.2 Ω IVDD-HB = 100 mA and 80 mA 7
Low-level output voltage (LO) VLOL 0.04 0.08 0.18 V ILO = 100 mA 7
High level output voltage (LO) VLOH 0.12 0.18 0.25 V ILO = -100 mA, VLOH = VDD, VLO 7
Low-level output voltage (HO) VHOL 0.04 0.08 0.18 V IHO = 100 mA 7
High-level output voltage (HO) VHOH 0.12 0.18 0.25 V IHO = -100 mA, VHOH = VHB, VHO 7
VLI falling to VLO falling TDLFF 18 22 30 ns CLOAD = 0 8
VHI falling to VHO falling TDHFF 18 22 30 ns CLOAD = 0 8
VLI rising to VLO rising TDLRR 17 21 29 ns CLOAD = 0 8
VHI rising to VHO rising TDHRR 17 21 29 ns CLOAD = 0 8
From HO OFF to LO ON TMON 2 7 ns 8
From LO OFF to HO ON TMOFF 2 7 ns 8
LO, HO rise time tR 0.35 0.5 µs CLOAD = 0.1 µF, (3 V to 9 V) 8
LO, HO fall time tF 0.16 0.3 µs CLOAD = 0.1 µF, (9 V to 3 V) 8
Input voltage hysteresis VIHYS 700 mV 7
Input pulldown resistance RIN 55 kΩ 7
VDD hysteresis VDDHYS 0.5 V 7
VHB hysteresis VHBHYS 1.1 V 7
Peak pull-up current (LO) ISRC_L 3 A VLO = 0 V 7
Peak pull-down current (LO) ISNK_L 4.5 A VLO = 12 V 7
Peak pull-up current (HO) ISRC_H 3 A VHO = 0 V 7
Peak pull-down current (HO) ISNK_H 4.5 A VHO = 12 V 7
LO rise time tR 7 ns CLOAD = 1000 pF, from 10% to 90% 8
HO rise time tR 7 ns 8
LO fall time tF 5 ns CLOAD = 1000 pF, from 90% to 10% 8
HO fall time tF 5 ns 8
Minimum input pulse width that changes the output 50 ns 8
Bootstrap diode turn off time 20 ns IF = 20 mA, IREV = 0.5 A 8
Thermal resistance, junction to ambient, SOP8-EP θJA 41.1 ℃/W 5

CAD (KiCad official)

  • Symbol: SLM27211CB-DG
  • Footprint: Package_SO:SOIC-8-1EP_3.9x4.9mm_P1.27mm_EP2.29x3mm
  • 3D model: SOP-8-EP (KiCad packages3D, STEP)
  • 3D model files: slm27211cb-dg-etched.step / slm27211cb-dg-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); slm27211cb-dg.step / slm27211cb-dg.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Sillumin datasheet (17 pp, sha256 4deec1e5e09db5d9, retrieved 2026-11-10, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF