main
Ray
Publish 0.1.0
efdce03
SLG46827-AG
RENESAS · Programmable Logic Device (CPLDs/FPGAs) · TSSOP-20
SLG46827-AG from RENESAS, in a TSSOP-20. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | IO14 | bidirectional | General purpose IO with OE (push-pull or open-drain NMOS, 1x/2x) that also serves as ACMP0H+ analog comparator positive input and EXT_RESET, powered from VDD2. |
| 2 | IO13 | bidirectional | General purpose IO with OE (push-pull or open-drain NMOS, 1x/2x) that also serves as ACMP1H+ analog comparator positive input, powered from VDD2. |
| 3 | IO12 | bidirectional | General purpose IO with OE (push-pull or open-drain NMOS, 1x/2x) that also serves as ACMP2L+ analog comparator positive input, powered from VDD2. |
| 4 | IO11 | bidirectional | General purpose IO with OE (push-pull or open-drain NMOS, 1x/2x) that also serves as ACMP3L+ analog comparator positive input, powered from VDD2. |
| 5 | IO10 | bidirectional | General purpose IO with OE (push-pull or open-drain NMOS, 1x/2x) that also serves as Vref0_OUT voltage reference 0 output and EXT_OSC1_IN, powered from VDD2. |
| 6 | IO9 | bidirectional | General purpose IO with OE (push-pull or open-drain NMOS, 1x/2x) that also serves as Vref1_OUT voltage reference 1 output and I2C_EXPAND_3, powered from VDD2. |
| 7 | VDD2 | power_in | Second power supply for IOs 7 to 14, 1.71 V to 5.5 V and must not exceed VDD. |
| 8 | IO8 | bidirectional | General purpose IO with OE (push-pull or open-drain NMOS, 1x/2x) that also serves as EXT_OSC2_IN, powered from VDD2. |
| 9 | IO7 | output | General purpose output with push-pull (1x/2x) or open-drain NMOS (1x/2x) options, powered from VDD2. |
| 10 | GND | power_in | Ground; the GND rail is split in two sides, with IOs 7 to 14 on one side and IOs 0 to 6, SCL, SDA on the other, and maximum DC current per chip side is 100 mA. |
| 11 | IO6 | output | General purpose output with push-pull (1x/2x) output option, powered from VDD. |
| 12 | SDA | bidirectional | I2C serial data input/output, with digital input without Schmitt trigger, with Schmitt trigger, or low voltage input options. |
| 13 | SCL | input | I2C serial clock input, with digital input without Schmitt trigger, with Schmitt trigger, or low voltage input options. |
| 14 | IO5 | bidirectional | General purpose IO with OE (push-pull or open-drain NMOS, 1x/2x) that also serves as EXT_SLA_3 slave address bit and I2C_EXPAND_1. |
| 15 | IO4 | bidirectional | General purpose IO with OE (push-pull or open-drain NMOS, 1x/2x) that also serves as EXT_SLA_2 slave address bit. |
| 16 | IO3 | bidirectional | General purpose IO (push-pull or open-drain NMOS, 1x/2x) that also serves as EXT_SLA_1 slave address bit. |
| 17 | IO2 | bidirectional | General purpose IO (push-pull or open-drain NMOS, 1x/2x) that also serves as EXT_SLA_0 slave address bit. |
| 18 | IO1 | bidirectional | General purpose IO with OE (push-pull or open-drain NMOS, 1x/2x) that also serves as EXT_Vref analog comparator negative input. |
| 19 | IO0 | bidirectional | General purpose IO (push-pull or open-drain NMOS, 1x/2x) that also serves as I2C_EXPAND_0 and EXT_OSC0_IN external clock connection. |
| 20 | VDD | power_in | Main power supply, 2.3 V to 5.5 V (2.5 V to 5.5 V during NVM write and erase), powering IOs 0 to 6, SCL and SDA and the core, with a 0.1 uF capacitor recommended. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | RENESAS |
| Package | TSSOP-20 |
| Category | Embedded Processors & Controllers |
| Pins | 20 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply Voltage on VDD relative to GND | VDD | -0.3 | 7 | V | 12 | ||
| DC Input Voltage | -0.5 | 0.5 | V | GND - 0.5 V to VDD + 0.5 V (min/max are offsets from GND/VDD) | 12 | ||
| Max DC Current Through VDD Pin | 90 | mA | 12 | ||||
| Max DC Current Through VDD2 Pin | 90 | mA | 12 | ||||
| Max DC Current Through GND Pin | 100 | mA | Per chip side | 12 | |||
| Max DC Current Through Pin, Push-Pull 1x | 15.3 | mA | Push-Pull 1x | 12 | |||
| Max DC Current Through Pin, Push-Pull 2x | 22.1 | mA | Push-Pull 2x | 12 | |||
| Max DC Current Through Pin, OD 1x | 15.5 | mA | OD 1x | 12 | |||
| Max DC Current Through Pin, OD 2x | 23 | mA | OD 2x | 12 | |||
| Current at Input Pin | -1 | 1 | mA | 12 | |||
| Input leakage (Absolute Value) | 1000 | nA | 12 | ||||
| Storage Temperature Range | -65 | 150 | °C | 12 | |||
| Junction Temperature | 150 | °C | 12 | ||||
| ESD Protection (Human Body Model) | 2000 | V | 12 | ||||
| ESD Protection (Charged Device Model) | 1300 | V | 12 | ||||
| Supply Voltage (VDD) | VDD | 2.3 | 5.5 | V | 12 | ||
| Supply Voltage (VDD) during NVM Write and Erase | VDD | 2.5 | 5.5 | V | During NVM Write and Erase commands | 12 | |
| Supply Voltage 2 (VDD2) | VDD2 | 1.71 | 5.5 | V | VDD2 ≤ VDD | 12 | |
| Operating Temperature | -40 | 105 | °C | 12 | |||
| Maximal Voltage Applied to any PIN in High Impedance State | 0.3 | V | VDD+0.3 (max is offset above VDD) | 12 | |||
| Capacitor Value at VDD | 0.1 | µF | 12 | ||||
| Analog Input Common Mode Range | 0 | V | Allowable Input Voltage at Analog Pins; max VDD or VDD2 | 12 | |||
| HIGH-Level Input Voltage, Logic Input | VIH | 0.7 | V | Logic Input; min 0.7x VDD | 13 | ||
| HIGH-Level Input Voltage, Schmitt Trigger | VIH | 0.8 | V | Logic Input with Schmitt Trigger; min 0.8x VDD | 13 | ||
| HIGH-Level Input Voltage, Low-Level Logic Input | VIH | 1.25 | V | Low-Level Logic Input | 13 | ||
| LOW-Level Input Voltage, Logic Input | VIL | 0.3 | V | Logic Input; max 0.3x VDD | 13 | ||
| LOW-Level Input Voltage, Schmitt Trigger | VIL | 0.2 | V | Logic Input with Schmitt Trigger; max 0.2x VDD | 13 | ||
| LOW-Level Input Voltage, Low-Level Logic Input | VIL | 0.5 | V | Low-Level Logic Input | 13 | ||
| Schmitt Trigger Hysteresis Voltage | VHYS | 0.195 | 0.38 | 0.559 | V | VDD2 = 1.8 V ± 5 % | 13 |
| Schmitt Trigger Hysteresis Voltage | VHYS | 0.199 | 0.391 | 0.634 | V | VDD = 2.3 V | 13 |
| Schmitt Trigger Hysteresis Voltage | VHYS | 0.232 | 0.422 | 0.604 | V | VDD = 3.3 V | 13 |
| Schmitt Trigger Hysteresis Voltage | VHYS | 0.283 | 0.44 | 0.641 | V | VDD = 4.0 V | 13 |
| Schmitt Trigger Hysteresis Voltage | VHYS | 0.37 | 0.577 | 0.785 | V | VDD = 5.5 V | 13 |
| HIGH-Level Output Voltage | VOH | 2.167 | 2.207 | V | Push-Pull, 1x Drive, IOH = 1 mA, VDD = VDD2 = 2.3 V | 13 | |
| HIGH-Level Output Voltage | VOH | 5.192 | 5.268 | V | Push-Pull, 1x Drive, IOH = 5 mA, VDD = VDD2 = 5.5 V | 13 | |
| HIGH-Level Output Voltage | VOH | 5.34 | 5.382 | V | Push-Pull, 2x Drive, IOH = 5 mA, VDD = VDD2 = 5.5 V | 13 | |
| LOW-Level Output Voltage | VOL | 0.069 | 0.1 | V | Push-Pull, 1x Drive, IOL= 1 mA, VDD = VDD2 = 2.3 V | 13 | |
| LOW-Level Output Voltage | VOL | 0.188 | 0.268 | V | Push-Pull, 1x Drive, IOL= 5 mA, VDD = VDD2 = 5.5 V | 14 | |
| LOW-Level Output Voltage | VOL | 0.045 | 0.064 | V | NMOS OD, 2x Drive, IOL = 5 mA, VDD = VDD2 = 5.5 V | 14 | |
| HIGH-Level Output Current | IOH | 1.461 | 2.04 | mA | Push-Pull, 1x Drive, VOH = VDD - 0.2 = VDD2 - 0.2, VDD = VDD2 = 2.3 V, Over lifetime at 105 °C | 14 | |
| HIGH-Level Output Current | IOH | 27.466 | 34.554 | mA | Push-Pull, 1x Drive, VOH = 2.4 V, VDD = VDD2 = 5.5 V | 14 | |
| HIGH-Level Output Current | IOH | 52.371 | 66.673 | mA | Push-Pull, 2x Drive, VOH = 2.4 V, VDD = VDD2 = 5.5 V | 15 | |
| LOW-Level Output Current | IOL | 1.413 | 2.099 | mA | Push-Pull, 1x Drive, VOL = 0.15 V, VDD = VDD2 = 2.3 V, Over lifetime at 105 °C | 15 | |
| LOW-Level Output Current | IOL | 30.115 | 42.783 | mA | NMOS OD, 2x Drive, VOL = 0.4 V, VDD = VDD2 = 5.5 V | 15 | |
| Startup Time | TSU | 2.082 | 2.745 | ms | From VDD rising past PONTHR, Tramp = 10ms | 15 | |
| NVM Page Write Time | TWR | 20 | ms | VDD = 2.5 V to 5.5 V | 15 | ||
| NVM Page Erase Time | TER | 20 | ms | VDD = 2.5 V to 5.5 V | 15 | ||
| Power-On Threshold | PONTHR | 1.521 | 1.843 | 2.117 | V | VDD Level Required to Start Up the Chip | 15 |
| Power-Off Threshold | POFFTHR | 0.839 | 1.242 | 1.593 | V | VDD Level Required to Switch Off the Chip | 15 |
| Input Capacitance | CIN | 1.986 | 2.33 | 2.62 | pF | 16 | |
| Input Leakage, Logic Input w/o Schmitt (IO0-IO2, IO5, IO8, IO9-IO14) | ILKG | 0.008 | 7.022 | nA | VIN = VDD, VDD = VDD2, VDD = 2.3 V to 5.5 V | 17 | |
| Input Leakage, Logic Input w/o Schmitt (IO3, IO4) | ILKG | 0.013 | 10.868 | nA | VIN = VDD, VDD = VDD2, VDD = 2.3 V to 5.5 V | 17 | |
| ACMP Input Leakage | ILKG | 0.011 | 12.928 | nA | VIN- = VDD, VDD = 5.5 V, Ext.Vref, Gain = 1 | 18 | |
| Oscillator 2.048 kHz OSC0 frequency limits | 1.83 | 2.097 | kHz | -40 °C to +105 °C, VDD = 2.3 V to 5.5 V | 26 | ||
| Oscillator 2.048 MHz OSC1 frequency limits | 1949.49 | 2089.94 | kHz | -40 °C to +105 °C, VDD = 2.3 V to 5.5 V | 26 | ||
| Oscillator 25 MHz OSC2 frequency limits | 23680.4 | 25574 | kHz | -40 °C to +105 °C, VDD = 2.3 V to 5.5 V | 26 | ||
| ACMP Input Voltage Range, Positive Input | VACMP | 0 | V | Positive Input; max VDD | 26 | ||
| ACMP0H/1H Input Offset Voltage | Voffset | -8.765 | 5.212 | mV | Vhys = 0 mV, Gain = 1, Vref = 32 mV | 27 | |
| ACMP2L/3L Start Time | tstart | 138.254 | 358.76 | µs | ACMP Power-On delay | 27 | |
| Chip Quiescent Current | I | 0.39 | µA | VDD = 3.3 V (typ only) | 19 |
Materials and finish
As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| contacts | silver | SLG46827-AG 20-pin TSSOP SLG46827-AGTR 20-pin TSSOP Tape and Reel (4k units) | 174 |
CAD (KiCad official)
- Symbol:
SLG46827-AG - Footprint:
Package_SO:TSSOP-20_4.4x6.5mm_P0.65mm - 3D model: TSSOP-20 (KiCad packages3D, STEP)
- 3D model files:
slg46827-ag-etched.step/slg46827-ag-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);slg46827-ag.step/slg46827-ag.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: RENESAS datasheet (181 pp, sha256
39f05d6d1494f913, retrieved 2026-11-02, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-opus-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# SLG46827-AG
**RENESAS** · Programmable Logic Device (CPLDs/FPGAs) · TSSOP-20
SLG46827-AG from RENESAS, in a TSSOP-20. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | IO14 | bidirectional | General purpose IO with OE (push-pull or open-drain NMOS, 1x/2x) that also serves as ACMP0H+ analog comparator positive input and EXT_RESET, powered from VDD2. |
| 2 | IO13 | bidirectional | General purpose IO with OE (push-pull or open-drain NMOS, 1x/2x) that also serves as ACMP1H+ analog comparator positive input, powered from VDD2. |
| 3 | IO12 | bidirectional | General purpose IO with OE (push-pull or open-drain NMOS, 1x/2x) that also serves as ACMP2L+ analog comparator positive input, powered from VDD2. |
| 4 | IO11 | bidirectional | General purpose IO with OE (push-pull or open-drain NMOS, 1x/2x) that also serves as ACMP3L+ analog comparator positive input, powered from VDD2. |
| 5 | IO10 | bidirectional | General purpose IO with OE (push-pull or open-drain NMOS, 1x/2x) that also serves as Vref0_OUT voltage reference 0 output and EXT_OSC1_IN, powered from VDD2. |
| 6 | IO9 | bidirectional | General purpose IO with OE (push-pull or open-drain NMOS, 1x/2x) that also serves as Vref1_OUT voltage reference 1 output and I2C_EXPAND_3, powered from VDD2. |
| 7 | VDD2 | power_in | Second power supply for IOs 7 to 14, 1.71 V to 5.5 V and must not exceed VDD. |
| 8 | IO8 | bidirectional | General purpose IO with OE (push-pull or open-drain NMOS, 1x/2x) that also serves as EXT_OSC2_IN, powered from VDD2. |
| 9 | IO7 | output | General purpose output with push-pull (1x/2x) or open-drain NMOS (1x/2x) options, powered from VDD2. |
| 10 | GND | power_in | Ground; the GND rail is split in two sides, with IOs 7 to 14 on one side and IOs 0 to 6, SCL, SDA on the other, and maximum DC current per chip side is 100 mA. |
| 11 | IO6 | output | General purpose output with push-pull (1x/2x) output option, powered from VDD. |
| 12 | SDA | bidirectional | I2C serial data input/output, with digital input without Schmitt trigger, with Schmitt trigger, or low voltage input options. |
| 13 | SCL | input | I2C serial clock input, with digital input without Schmitt trigger, with Schmitt trigger, or low voltage input options. |
| 14 | IO5 | bidirectional | General purpose IO with OE (push-pull or open-drain NMOS, 1x/2x) that also serves as EXT_SLA_3 slave address bit and I2C_EXPAND_1. |
| 15 | IO4 | bidirectional | General purpose IO with OE (push-pull or open-drain NMOS, 1x/2x) that also serves as EXT_SLA_2 slave address bit. |
| 16 | IO3 | bidirectional | General purpose IO (push-pull or open-drain NMOS, 1x/2x) that also serves as EXT_SLA_1 slave address bit. |
| 17 | IO2 | bidirectional | General purpose IO (push-pull or open-drain NMOS, 1x/2x) that also serves as EXT_SLA_0 slave address bit. |
| 18 | IO1 | bidirectional | General purpose IO with OE (push-pull or open-drain NMOS, 1x/2x) that also serves as EXT_Vref analog comparator negative input. |
| 19 | IO0 | bidirectional | General purpose IO (push-pull or open-drain NMOS, 1x/2x) that also serves as I2C_EXPAND_0 and EXT_OSC0_IN external clock connection. |
| 20 | VDD | power_in | Main power supply, 2.3 V to 5.5 V (2.5 V to 5.5 V during NVM write and erase), powering IOs 0 to 6, SCL and SDA and the core, with a 0.1 uF capacitor recommended. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | RENESAS |
| Package | TSSOP-20 |
| Category | Embedded Processors & Controllers |
| Pins | 20 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply Voltage on VDD relative to GND | VDD | -0.3 | | 7 | V | | 12 |
| DC Input Voltage | | -0.5 | | 0.5 | V | GND - 0.5 V to VDD + 0.5 V (min/max are offsets from GND/VDD) | 12 |
| Max DC Current Through VDD Pin | | | | 90 | mA | | 12 |
| Max DC Current Through VDD2 Pin | | | | 90 | mA | | 12 |
| Max DC Current Through GND Pin | | | | 100 | mA | Per chip side | 12 |
| Max DC Current Through Pin, Push-Pull 1x | | | | 15.3 | mA | Push-Pull 1x | 12 |
| Max DC Current Through Pin, Push-Pull 2x | | | | 22.1 | mA | Push-Pull 2x | 12 |
| Max DC Current Through Pin, OD 1x | | | | 15.5 | mA | OD 1x | 12 |
| Max DC Current Through Pin, OD 2x | | | | 23 | mA | OD 2x | 12 |
| Current at Input Pin | | -1 | | 1 | mA | | 12 |
| Input leakage (Absolute Value) | | | | 1000 | nA | | 12 |
| Storage Temperature Range | | -65 | | 150 | °C | | 12 |
| Junction Temperature | | | | 150 | °C | | 12 |
| ESD Protection (Human Body Model) | | 2000 | | | V | | 12 |
| ESD Protection (Charged Device Model) | | 1300 | | | V | | 12 |
| Supply Voltage (VDD) | VDD | 2.3 | | 5.5 | V | | 12 |
| Supply Voltage (VDD) during NVM Write and Erase | VDD | 2.5 | | 5.5 | V | During NVM Write and Erase commands | 12 |
| Supply Voltage 2 (VDD2) | VDD2 | 1.71 | | 5.5 | V | VDD2 ≤ VDD | 12 |
| Operating Temperature | | -40 | | 105 | °C | | 12 |
| Maximal Voltage Applied to any PIN in High Impedance State | | | | 0.3 | V | VDD+0.3 (max is offset above VDD) | 12 |
| Capacitor Value at VDD | | 0.1 | | | µF | | 12 |
| Analog Input Common Mode Range | | 0 | | | V | Allowable Input Voltage at Analog Pins; max VDD or VDD2 | 12 |
| HIGH-Level Input Voltage, Logic Input | VIH | 0.7 | | | V | Logic Input; min 0.7x VDD | 13 |
| HIGH-Level Input Voltage, Schmitt Trigger | VIH | 0.8 | | | V | Logic Input with Schmitt Trigger; min 0.8x VDD | 13 |
| HIGH-Level Input Voltage, Low-Level Logic Input | VIH | 1.25 | | | V | Low-Level Logic Input | 13 |
| LOW-Level Input Voltage, Logic Input | VIL | | | 0.3 | V | Logic Input; max 0.3x VDD | 13 |
| LOW-Level Input Voltage, Schmitt Trigger | VIL | | | 0.2 | V | Logic Input with Schmitt Trigger; max 0.2x VDD | 13 |
| LOW-Level Input Voltage, Low-Level Logic Input | VIL | | | 0.5 | V | Low-Level Logic Input | 13 |
| Schmitt Trigger Hysteresis Voltage | VHYS | 0.195 | 0.38 | 0.559 | V | VDD2 = 1.8 V ± 5 % | 13 |
| Schmitt Trigger Hysteresis Voltage | VHYS | 0.199 | 0.391 | 0.634 | V | VDD = 2.3 V | 13 |
| Schmitt Trigger Hysteresis Voltage | VHYS | 0.232 | 0.422 | 0.604 | V | VDD = 3.3 V | 13 |
| Schmitt Trigger Hysteresis Voltage | VHYS | 0.283 | 0.44 | 0.641 | V | VDD = 4.0 V | 13 |
| Schmitt Trigger Hysteresis Voltage | VHYS | 0.37 | 0.577 | 0.785 | V | VDD = 5.5 V | 13 |
| HIGH-Level Output Voltage | VOH | 2.167 | 2.207 | | V | Push-Pull, 1x Drive, IOH = 1 mA, VDD = VDD2 = 2.3 V | 13 |
| HIGH-Level Output Voltage | VOH | 5.192 | 5.268 | | V | Push-Pull, 1x Drive, IOH = 5 mA, VDD = VDD2 = 5.5 V | 13 |
| HIGH-Level Output Voltage | VOH | 5.34 | 5.382 | | V | Push-Pull, 2x Drive, IOH = 5 mA, VDD = VDD2 = 5.5 V | 13 |
| LOW-Level Output Voltage | VOL | | 0.069 | 0.1 | V | Push-Pull, 1x Drive, IOL= 1 mA, VDD = VDD2 = 2.3 V | 13 |
| LOW-Level Output Voltage | VOL | | 0.188 | 0.268 | V | Push-Pull, 1x Drive, IOL= 5 mA, VDD = VDD2 = 5.5 V | 14 |
| LOW-Level Output Voltage | VOL | | 0.045 | 0.064 | V | NMOS OD, 2x Drive, IOL = 5 mA, VDD = VDD2 = 5.5 V | 14 |
| HIGH-Level Output Current | IOH | 1.461 | 2.04 | | mA | Push-Pull, 1x Drive, VOH = VDD - 0.2 = VDD2 - 0.2, VDD = VDD2 = 2.3 V, Over lifetime at 105 °C | 14 |
| HIGH-Level Output Current | IOH | 27.466 | 34.554 | | mA | Push-Pull, 1x Drive, VOH = 2.4 V, VDD = VDD2 = 5.5 V | 14 |
| HIGH-Level Output Current | IOH | 52.371 | 66.673 | | mA | Push-Pull, 2x Drive, VOH = 2.4 V, VDD = VDD2 = 5.5 V | 15 |
| LOW-Level Output Current | IOL | 1.413 | 2.099 | | mA | Push-Pull, 1x Drive, VOL = 0.15 V, VDD = VDD2 = 2.3 V, Over lifetime at 105 °C | 15 |
| LOW-Level Output Current | IOL | 30.115 | 42.783 | | mA | NMOS OD, 2x Drive, VOL = 0.4 V, VDD = VDD2 = 5.5 V | 15 |
| Startup Time | TSU | | 2.082 | 2.745 | ms | From VDD rising past PONTHR, Tramp = 10ms | 15 |
| NVM Page Write Time | TWR | | | 20 | ms | VDD = 2.5 V to 5.5 V | 15 |
| NVM Page Erase Time | TER | | | 20 | ms | VDD = 2.5 V to 5.5 V | 15 |
| Power-On Threshold | PONTHR | 1.521 | 1.843 | 2.117 | V | VDD Level Required to Start Up the Chip | 15 |
| Power-Off Threshold | POFFTHR | 0.839 | 1.242 | 1.593 | V | VDD Level Required to Switch Off the Chip | 15 |
| Input Capacitance | CIN | 1.986 | 2.33 | 2.62 | pF | | 16 |
| Input Leakage, Logic Input w/o Schmitt (IO0-IO2, IO5, IO8, IO9-IO14) | ILKG | | 0.008 | 7.022 | nA | VIN = VDD, VDD = VDD2, VDD = 2.3 V to 5.5 V | 17 |
| Input Leakage, Logic Input w/o Schmitt (IO3, IO4) | ILKG | | 0.013 | 10.868 | nA | VIN = VDD, VDD = VDD2, VDD = 2.3 V to 5.5 V | 17 |
| ACMP Input Leakage | ILKG | | 0.011 | 12.928 | nA | VIN- = VDD, VDD = 5.5 V, Ext.Vref, Gain = 1 | 18 |
| Oscillator 2.048 kHz OSC0 frequency limits | | 1.83 | | 2.097 | kHz | -40 °C to +105 °C, VDD = 2.3 V to 5.5 V | 26 |
| Oscillator 2.048 MHz OSC1 frequency limits | | 1949.49 | | 2089.94 | kHz | -40 °C to +105 °C, VDD = 2.3 V to 5.5 V | 26 |
| Oscillator 25 MHz OSC2 frequency limits | | 23680.4 | | 25574 | kHz | -40 °C to +105 °C, VDD = 2.3 V to 5.5 V | 26 |
| ACMP Input Voltage Range, Positive Input | VACMP | 0 | | | V | Positive Input; max VDD | 26 |
| ACMP0H/1H Input Offset Voltage | Voffset | -8.765 | | 5.212 | mV | Vhys = 0 mV, Gain = 1, Vref = 32 mV | 27 |
| ACMP2L/3L Start Time | tstart | | 138.254 | 358.76 | µs | ACMP Power-On delay | 27 |
| Chip Quiescent Current | I | | 0.39 | | µA | VDD = 3.3 V (typ only) | 19 |
## Materials and finish
As the datasheet states them (page.json `metadata.appearance`; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| contacts | | silver | SLG46827-AG 20-pin TSSOP SLG46827-AGTR 20-pin TSSOP Tape and Reel (4k units) | 174 |
## CAD (KiCad official)
- Symbol: `SLG46827-AG`
- Footprint: `Package_SO:TSSOP-20_4.4x6.5mm_P0.65mm`
- 3D model: TSSOP-20 (KiCad packages3D, STEP)
- 3D model files: `slg46827-ag-etched.step` / `slg46827-ag-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `slg46827-ag.step` / `slg46827-ag.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [RENESAS datasheet](docs/slg46827-ag-datasheet.pdf) (181 pp, sha256 `39f05d6d1494f913`, retrieved 2026-11-02, tier: manufacturer)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-sonnet-5-5` (text), consensus `claude-opus-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/slg46827-ag-datasheet.pdf)