component
SL9650M25SE
Public Made by Adomby adom
Slkor SLKORMICRO Elec Voltage Regulators - Linear, Low Drop Out (LDO) Regulators, SOT-23-5. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
main
SL9650M25SE
Slkor SLKORMICRO Elec · Voltage Regulators - Linear, Low Drop Out (LDO) Regulators · SOT-23-5
SL9650M25SE from Slkor SLKORMICRO Elec, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VIN | power_in | Power input with a 1.7V to 7V operating range (8.5V maximum input voltage rating); VIN must stay at least the dropout voltage above VOUT for regulation, and a 1µF input capacitor is recommended. |
| 2 | GND | power_in | Ground reference pin for the regulator. |
| 3 | EN | input | Chip enable, active high: logic high needs at least 1V and logic low is 0.4V maximum, and the pin is high impedance. |
| 4 | NC | unconnected | No internal connection on this pin. |
| 5 | VOUT | power_out | Regulated output (2.5V for this fixed-output version, 600mA maximum); a minimum 1µF capacitor from VOUT to ground is required for stability. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Slkor SLKORMICRO Elec |
| Package | SOT-23-5 |
| Category | Power Management (PMIC) |
| Pins | 5 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input Voltage | VIN | 1.7 | 7 | V | 6 | ||
| Output Voltage Accuracy | ∆VOUT | -2 | 2 | % | 6 | ||
| Quiescent Current | IQ | 50 | 75 | μA | IOUT=0mA | 6 | |
| Max. Output Current | IOUT (Max.) | 600 | mA | VIN-VOUT=1V | 6 | ||
| Dropout Voltage | VDROP | 300 | 500 | mV | VOUT=3.3V, IOUT=600mA | 6 | |
| Line Regulation | ∆VLINE | 0.02 | 0.1 | %/V | IOUT=1mA | 6 | |
| Load Regulation | ∆VLOAD | 15 | 30 | mV | 0mA≤IOUT≤600mA | 6 | |
| Current Limit | ILIM | 0.7 | 0.75 | A | 6 | ||
| Standby Current | 1 | μA | EN=0 | 6 | |||
| EN Input Threshold Logic Low | VCEL | 0.4 | V | EN Low Voltage | 6 | ||
| EN Input Threshold Logic High | VCEH | 1 | V | EN High Voltage | 6 | ||
| Output Voltage Temperature Coefficient | TCVOUT | -100 | 100 | ppm/°C | 6 | ||
| Over Temperature Protection | OTP | 130 | 150 | 170 | °C | 6 | |
| Maximum Input Voltage | 8.5 | V | 5 | ||||
| Output Current | 600 | mA | 5 | ||||
| Power Dissipation (SOT-23-5) | 450 | mW | SOT-23-5 | 5 | |||
| Maximum Junction Temperature | 150 | °C | 5 | ||||
| Operating Ambient Temperature (absolute maximum ratings) | -40 | 125 | °C | 5 | |||
| Storage Temperature Range | -55 | 150 | °C | 5 | |||
| Supply Voltage | 1.7 | 7 | V | 5 | |||
| Maximum Output Current (recommended) | 600 | mA | 5 | ||||
| Operating Ambient Temperature (recommended) | -40 | 125 | °C | 5 | |||
| Thermal Resistance, Junction-to-Ambient (SOT-23-5) | RθJA | 220 | °C/W | SOT-23-5 | 5 |
CAD (KiCad official)
- Symbol:
SL9650M25SE - Footprint:
Package_TO_SOT_SMD:SOT-23-5 - 3D model: SOT-23-5 (KiCad packages3D, STEP)
- 3D model files:
sl9650m25se-etched.step/sl9650m25se-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);sl9650m25se.step/sl9650m25se.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Slkor SLKORMICRO Elec datasheet (17 pp, sha256
fbe73ba6c208c956, retrieved 2026-10-18, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# SL9650M25SE
**Slkor SLKORMICRO Elec** · Voltage Regulators - Linear, Low Drop Out (LDO) Regulators · SOT-23-5
SL9650M25SE from Slkor SLKORMICRO Elec, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VIN | power_in | Power input with a 1.7V to 7V operating range (8.5V maximum input voltage rating); VIN must stay at least the dropout voltage above VOUT for regulation, and a 1µF input capacitor is recommended. |
| 2 | GND | power_in | Ground reference pin for the regulator. |
| 3 | EN | input | Chip enable, active high: logic high needs at least 1V and logic low is 0.4V maximum, and the pin is high impedance. |
| 4 | NC | unconnected | No internal connection on this pin. |
| 5 | VOUT | power_out | Regulated output (2.5V for this fixed-output version, 600mA maximum); a minimum 1µF capacitor from VOUT to ground is required for stability. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Slkor SLKORMICRO Elec |
| Package | SOT-23-5 |
| Category | Power Management (PMIC) |
| Pins | 5 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input Voltage | VIN | 1.7 | | 7 | V | | 6 |
| Output Voltage Accuracy | ∆VOUT | -2 | | 2 | % | | 6 |
| Quiescent Current | IQ | | 50 | 75 | μA | IOUT=0mA | 6 |
| Max. Output Current | IOUT (Max.) | 600 | | | mA | VIN-VOUT=1V | 6 |
| Dropout Voltage | VDROP | | 300 | 500 | mV | VOUT=3.3V, IOUT=600mA | 6 |
| Line Regulation | ∆VLINE | | 0.02 | 0.1 | %/V | IOUT=1mA | 6 |
| Load Regulation | ∆VLOAD | | 15 | 30 | mV | 0mA≤IOUT≤600mA | 6 |
| Current Limit | ILIM | 0.7 | 0.75 | | A | | 6 |
| Standby Current | | | | 1 | μA | EN=0 | 6 |
| EN Input Threshold Logic Low | VCEL | | | 0.4 | V | EN Low Voltage | 6 |
| EN Input Threshold Logic High | VCEH | 1 | | | V | EN High Voltage | 6 |
| Output Voltage Temperature Coefficient | TCVOUT | -100 | | 100 | ppm/°C | | 6 |
| Over Temperature Protection | OTP | 130 | 150 | 170 | °C | | 6 |
| Maximum Input Voltage | | | | 8.5 | V | | 5 |
| Output Current | | | | 600 | mA | | 5 |
| Power Dissipation (SOT-23-5) | | | | 450 | mW | SOT-23-5 | 5 |
| Maximum Junction Temperature | | | | 150 | °C | | 5 |
| Operating Ambient Temperature (absolute maximum ratings) | | -40 | | 125 | °C | | 5 |
| Storage Temperature Range | | -55 | | 150 | °C | | 5 |
| Supply Voltage | | 1.7 | | 7 | V | | 5 |
| Maximum Output Current (recommended) | | | | 600 | mA | | 5 |
| Operating Ambient Temperature (recommended) | | -40 | | 125 | °C | | 5 |
| Thermal Resistance, Junction-to-Ambient (SOT-23-5) | RθJA | | 220 | | °C/W | SOT-23-5 | 5 |
## CAD (KiCad official)
- Symbol: `SL9650M25SE`
- Footprint: `Package_TO_SOT_SMD:SOT-23-5`
- 3D model: SOT-23-5 (KiCad packages3D, STEP)
- 3D model files: `sl9650m25se-etched.step` / `sl9650m25se-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `sl9650m25se.step` / `sl9650m25se.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Slkor SLKORMICRO Elec datasheet](https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8603059843599253504) (17 pp, sha256 `fbe73ba6c208c956`, retrieved 2026-10-18, tier: lcsc)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/sl9650m25se-datasheet.pdf)