component
SL9193M15SA
Public Made by Adomby adom
Slkor SLKORMICRO Elec Voltage Regulators - Linear, Low Drop Out (LDO) Regulators, SOT-23. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
main
SL9193M15SA
Slkor SLKORMICRO Elec · Voltage Regulators - Linear, Low Drop Out (LDO) Regulators · SOT-23
SL9193M15SA from Slkor SLKORMICRO Elec, in a SOT-23. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | GND | power_in | Ground reference pin; input and output capacitor ground connections must return to this pin through as wide and as short a copper trace as is practical. |
| 2 | VOUT | power_out | Regulated output voltage pin; a minimum 1µF ceramic output capacitor (X7R or X5R) is required between VOUT and GND, placed as close to the pins as possible. |
| 3 | VIN | power_in | Power input pin with an operating supply range of 2V to 6.5V (absolute maximum input -0.3V to 7V); a 1µF ceramic capacitor is recommended between VIN and GND, placed close to the device. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Slkor SLKORMICRO Elec |
| Package | SOT-23 |
| Category | Power Management (PMIC) |
| Pins | 3 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Output Voltage Accuracy | ∆VOUT | -2 | 2 | % | IOUT=40mA | 5 | |
| Logic Low (EN, shutdown) | VIL | 0.4 | V | VIN=3V to 5.5V, Shutdown | 5 | ||
| Logic High (EN, start up) | VIH | 1.2 | V | VIN=3V to 5.5V, Start up | 5 | ||
| Input Voltage | VIN | -0.3 | 6.5 | V | 5 | ||
| Supply Voltage (recommended) | VIN | 2 | 6.5 | V | 4 | ||
| Operating Free Air Temperature Range | TA | -40 | 85 | °C | 4 | ||
| Operating Junction Temperature Range | Tj | -40 | 125 | °C | 4 | ||
| Input Voltage (absolute maximum) | VIN | -0.3 | 7 | V | 4 | ||
| Output Voltage (absolute maximum) | VOUT | -0.3 | V | Maximum printed as VIN+0.3 V | 4 | ||
| Storage Temperature Range | -40 | 125 | °C | 4 | |||
| Maximum Junction Temperature | 260 | °C | 4 | ||||
| Power Dissipation (SOT-23) | PD | 300 | mW | SOT-23 package | 4 | ||
| ESD (HBM) | 4 | KV | JEDEC JESD22 human body model, 100pF / 1.5kΩ | 4 | |||
| ESD (CDM) | 400 | V | JEDEC JESD22 machine model, 200pF | 4 | |||
| Thermal Resistance, Junction-to-Ambient (SOT-23) | RθJA | 330 | ℃/W | SOT-23 package | 4 | ||
| Quiescent Current | IQ | 70 | µA | VIN>VOUT, EN=VIN, IOUT=0mA | 5 | ||
| Dropout Voltage | VDROP | 130 | mV | IOUT=100mA | 5 | ||
| Dropout Voltage | VDROP | 250 | mV | IOUT=200mA | 5 | ||
| Line Regulation | ∆VLINE | 0.05 | %/V | VIN=VOUT+1V to 7V, IOUT=40mA | 5 | ||
| Load Regulation | ∆VLOAD | 50 | mV | 1mA<IOUT<100mA | 5 | ||
| Output Voltage Temperature Coefficient | TCVOUT | 100 | ppm/℃ | IOUT=10mA | 5 | ||
| Short Circuit / Start Carrying Current | ISHORT | 50 | RL=1Ω | 5 | |||
| EN Leakage Current | IEN | 1 | 5 | ||||
| Output Noise Voltage | eNO | 50 | µVRMS | 300Hz to 50KHz, IOUT=40mA | 5 | ||
| Power Supply Rejection Rate | PSRR | 70 | dB | VIN=VOUT+1, IOUT=40mA, f=1KHz | 5 | ||
| Current Limit | ILIM | 450 | mA | VIN=VOUT+1 | 5 |
Materials and finish
As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| contacts | copper | connections for input and output capacitors must be back to the SL9193 Series ground pin using as wide and as short of a copper trace as is practical.Connections using long trace | 7 |
CAD (KiCad official)
- Symbol:
SL9193M15SA - Footprint:
Package_TO_SOT_SMD:SOT-23 - 3D model: SOT-23 (KiCad packages3D, STEP)
- 3D model files:
sl9193m15sa-etched.step/sl9193m15sa-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);sl9193m15sa.step/sl9193m15sa.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Slkor SLKORMICRO Elec datasheet (11 pp, sha256
ad2587d53788a1e9, retrieved 2026-10-17, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# SL9193M15SA
**Slkor SLKORMICRO Elec** · Voltage Regulators - Linear, Low Drop Out (LDO) Regulators · SOT-23
SL9193M15SA from Slkor SLKORMICRO Elec, in a SOT-23. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | GND | power_in | Ground reference pin; input and output capacitor ground connections must return to this pin through as wide and as short a copper trace as is practical. |
| 2 | VOUT | power_out | Regulated output voltage pin; a minimum 1µF ceramic output capacitor (X7R or X5R) is required between VOUT and GND, placed as close to the pins as possible. |
| 3 | VIN | power_in | Power input pin with an operating supply range of 2V to 6.5V (absolute maximum input -0.3V to 7V); a 1µF ceramic capacitor is recommended between VIN and GND, placed close to the device. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Slkor SLKORMICRO Elec |
| Package | SOT-23 |
| Category | Power Management (PMIC) |
| Pins | 3 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Output Voltage Accuracy | ∆VOUT | -2 | | 2 | % | IOUT=40mA | 5 |
| Logic Low (EN, shutdown) | VIL | | | 0.4 | V | VIN=3V to 5.5V, Shutdown | 5 |
| Logic High (EN, start up) | VIH | 1.2 | | | V | VIN=3V to 5.5V, Start up | 5 |
| Input Voltage | VIN | -0.3 | | 6.5 | V | | 5 |
| Supply Voltage (recommended) | VIN | 2 | | 6.5 | V | | 4 |
| Operating Free Air Temperature Range | TA | -40 | | 85 | °C | | 4 |
| Operating Junction Temperature Range | Tj | -40 | | 125 | °C | | 4 |
| Input Voltage (absolute maximum) | VIN | -0.3 | | 7 | V | | 4 |
| Output Voltage (absolute maximum) | VOUT | -0.3 | | | V | Maximum printed as VIN+0.3 V | 4 |
| Storage Temperature Range | | -40 | | 125 | °C | | 4 |
| Maximum Junction Temperature | | | | 260 | °C | | 4 |
| Power Dissipation (SOT-23) | PD | | | 300 | mW | SOT-23 package | 4 |
| ESD (HBM) | | | | 4 | KV | JEDEC JESD22 human body model, 100pF / 1.5kΩ | 4 |
| ESD (CDM) | | | | 400 | V | JEDEC JESD22 machine model, 200pF | 4 |
| Thermal Resistance, Junction-to-Ambient (SOT-23) | RθJA | | 330 | | ℃/W | SOT-23 package | 4 |
| Quiescent Current | IQ | | 70 | | µA | VIN>VOUT, EN=VIN, IOUT=0mA | 5 |
| Dropout Voltage | VDROP | | 130 | | mV | IOUT=100mA | 5 |
| Dropout Voltage | VDROP | | 250 | | mV | IOUT=200mA | 5 |
| Line Regulation | ∆VLINE | | 0.05 | | %/V | VIN=VOUT+1V to 7V, IOUT=40mA | 5 |
| Load Regulation | ∆VLOAD | | 50 | | mV | 1mA<IOUT<100mA | 5 |
| Output Voltage Temperature Coefficient | TCVOUT | | 100 | | ppm/℃ | IOUT=10mA | 5 |
| Short Circuit / Start Carrying Current | ISHORT | | 50 | | | RL=1Ω | 5 |
| EN Leakage Current | IEN | | 1 | | | | 5 |
| Output Noise Voltage | eNO | | 50 | | µVRMS | 300Hz to 50KHz, IOUT=40mA | 5 |
| Power Supply Rejection Rate | PSRR | | 70 | | dB | VIN=VOUT+1, IOUT=40mA, f=1KHz | 5 |
| Current Limit | ILIM | | 450 | | mA | VIN=VOUT+1 | 5 |
## Materials and finish
As the datasheet states them (page.json `metadata.appearance`; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| contacts | copper | | connections for input and output capacitors must be back to the SL9193 Series ground pin using as wide and as short of a copper trace as is practical.Connections using long trace | 7 |
## CAD (KiCad official)
- Symbol: `SL9193M15SA`
- Footprint: `Package_TO_SOT_SMD:SOT-23`
- 3D model: SOT-23 (KiCad packages3D, STEP)
- 3D model files: `sl9193m15sa-etched.step` / `sl9193m15sa-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `sl9193m15sa.step` / `sl9193m15sa.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Slkor SLKORMICRO Elec datasheet](https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8603055942556524544) (11 pp, sha256 `ad2587d53788a1e9`, retrieved 2026-10-17, tier: lcsc)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/sl9193m15sa-datasheet.pdf)