# SL9062C

**Slkor SLKORMICRO Elec** · Operational Amplifier · SOP-8

SL9062C from Slkor SLKORMICRO Elec, in a SOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

## Pinout

| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OUT1 | output | Output of amplifier 1; the output swings to within about 10 mV of either supply rail with a 10 kΩ load (typical). |
| 2 | IN1- | input | Inverting input of amplifier 1; the common-mode input range extends from (V-)-0.1 V to (V+)+0.1 V. |
| 3 | IN1+ | input | Non-inverting input of amplifier 1; the common-mode input range extends from (V-)-0.1 V to (V+)+0.1 V. |
| 4 | V- | power_in | Negative supply or ground; supply is specified as Vs = (V+) - (V-) from 1.5 V to 5.5 V. |
| 5 | IN2+ | input | Non-inverting input of amplifier 2; the common-mode input range extends from (V-)-0.1 V to (V+)+0.1 V. |
| 6 | IN2- | input | Inverting input of amplifier 2; the common-mode input range extends from (V-)-0.1 V to (V+)+0.1 V. |
| 7 | OUT2 | output | Output of amplifier 2; the output swings to within about 10 mV of either supply rail with a 10 kΩ load (typical). |
| 8 | V+ | power_in | Positive supply; supply is specified as Vs = (V+) - (V-) from 1.5 V to 5.5 V. |

## Key specifications

| Parameter | Value |
|---|---|
| Manufacturer | Slkor SLKORMICRO Elec |
| Package | SOP-8 |
| Category | Amplifiers/Comparators |
| Pins | 8 |

## Electrical characteristics

Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).

| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage (V+)-(V-) | Vs | 1.5 |  | 5.5 | V |  | 8 |
| Operating ambient temperature | Ta | -40 |  | 125 | °C |  | 8 |
| Quiescent current per amplifier | Iq |  | 400 | 500 | μA | Vs=5.5V, Io=0mA | 8 |
| Quiescent current per amplifier, all temperature | Iq |  |  | 600 | μA | all temp | 8 |
| Input offset voltage | Vos | -2 | 0.5 | 2 | mV |  | 8 |
| Input offset voltage, all temperature | Vos | -3 |  | 3 | mV | all temp | 8 |
| Input offset voltage drift | dVos/dT | -0.5 |  | 0.5 | μV/°C | all temp | 8 |
| Input bias current | Ib | -0.5 |  | 0.5 | pA |  | 8 |
| Input offset current | Ios | -0.05 |  | 0.05 | pA |  | 8 |
| Short circuit current | Isc | -50 |  | 50 | mA |  | 9 |
| Voltage output swing from supply rails | Vo |  | 5 | 10 | mV | RL=10kΩ | 9 |
| Voltage output swing from supply rails | Vo |  | 15 | 30 | mV | RL=2kΩ | 9 |
| Supply voltage (V+)-(V-) | Vs | -0.3 |  | 6 | V |  | 7 |
| Junction temperature | Tj |  |  | 150 | °C |  | 7 |
| Storage temperature | Tstg | -55 |  | 150 | °C |  | 7 |
| ESD (HBM), all pins |  | -6000 |  | 6000 | V |  | 7 |
| ESD (CDM), all pins |  | -500 |  | 500 | V |  | 7 |
| Latch-up current, all pins |  | 100 |  |  | mA | JESD78, Class A | 7 |
| Power supply rejection ratio | PSRR |  | 100 |  | dB | At DC | 8 |
| Channel separation | Csep |  | 120 |  | dB | At DC | 8 |
| Common mode rejection ratio | CMRR |  | 100 |  | dB | At DC | 8 |
| Input voltage noise (20Hz to 20kHz) | En |  | 1.5 |  | μV | f=20Hz to 20kHz | 8 |
| Input voltage noise density | en |  | 7 |  | nV/√Hz | f=10kHz | 8 |
| Input voltage noise density | en |  | 15 |  | nV/√Hz | f=1kHz | 8 |
| Differential input capacitance | Cid |  | 2 |  | pF |  | 8 |
| Common mode input capacitance | Cic |  | 4 |  | pF |  | 8 |
| Open loop voltage gain | Aol |  | 110 |  | dB |  | 8 |
| Gain bandwidth product | GBP |  | 25 |  | MHz | G=+1, CL=10pF | 8 |
| Phase margin | φ |  | 60 |  | o | G=+1, CL=10pF | 8 |
| Capacitive load | Cload |  | 1 |  | nF | G=+1 | 8 |
| Slew rate | SR |  | 8 |  | V/μs | G=+1, CL=100pF | 8 |
| Settling time | Ts |  | 0.5 |  | μs | To 0.1%, 2V step, G=+1, CL=100pF | 9 |
| Overload recovery time | Tor |  | 50 |  | ns | VIN x gain > Vs, CL=100pF | 9 |
| Total harmonic distortion + noise | THD+N |  | 100 |  | dB | Vs=5.5V, Vcm=2.5V, Vo=1Vrms, G=+1, f=1kHz; 3rd order filter, BW=80kHz at -3dB | 9 |
| Signal to noise ratio | SNR |  | 110 |  | dB |  | 9 |
| Open loop output impedance | Zo |  | 100 |  | Ω | f=10MHz | 9 |
| Thermal resistance junction-to-ambient (SOP8) | Rth j-amb |  | 136 |  | °C/W |  | 7 |
| Thermal resistance junction-to-case (SOP8) | Rth j-case |  | 77 |  | °C/W |  | 7 |

## CAD (KiCad official)

- Symbol: `SL9062C`
- Footprint: `Package_SO:SOIC-8_3.9x4.9mm_P1.27mm`
- 3D model: SOP-8 (KiCad packages3D, STEP)
- 3D model files: `sl9062c-etched.step` / `sl9062c-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `sl9062c.step` / `sl9062c.glb` are the bare package body.

## Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

- **Datasheet:** [Slkor SLKORMICRO Elec datasheet](https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8590906428909969408) (23 pp, sha256 `79e26cd7ef613a72`, retrieved 2026-10-16, tier: lcsc)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).

[Datasheet PDF](docs/sl9062c-datasheet.pdf)