component
SL7533-8
Public Made by Adomby adom
Slkor SLKORMICRO Elec Voltage Regulators - Linear, Low Drop Out (LDO) Regulators, SOT-89-3. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
main
SL7533-8
Slkor SLKORMICRO Elec · Voltage Regulators - Linear, Low Drop Out (LDO) Regulators · SOT-89-3
SL7533-8 from Slkor SLKORMICRO Elec, in a SOT-89-3. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | GND | power_in | Ground pin for the regulator, as listed in the pin table for the series. |
| 2 | VIN | power_in | Input pin; the input voltage must not exceed the 36 V maximum rating (absolute limit -0.3 V to +36 V). |
| 3 | VOUT | power_out | Regulated 3.3 V output (3.234 V to 3.366 V at 10 mA) with at least 70 mA output current at VIN = VOUT + 2 V; the datasheet requires an output-to-ground capacitor greater than 2.2 µF. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Slkor SLKORMICRO Elec |
| Package | SOT-89-3 |
| Category | Power Management (PMIC) |
| Pins | 3 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Output voltage (3.3V variant) | VOUT | 3.234 | 3.3 | 3.366 | V | VIN=VOUT+2V, IOUT=10mA | 3 |
| Output current | IOUT | 70 | 100 | mA | VIN=VOUT+2V | 3 | |
| Load regulation | ΔVOUT | 25 | 60 | mV | VIN=VOUT+2V, 1mA ≤ IOUT ≤ 50mA | 3 | |
| Dropout voltage | VDIF | 2 | 4 | mV | IOUT=1mA, ΔVo=2% | 3 | |
| Quiescent current (static current) | ISS | 2 | 3 | uA | No load | 3 | |
| Input voltage regulation (line regulation) | 0.2 | %/V | Vo+1V≤VIN≤36V, IOUT=1mA | 3 | |||
| Temperature coefficient | 100 | ppm/℃ | IOUT=10mA, -40℃<Ta<85℃ | 3 | |||
| Input voltage | VIN | -0.3 | 36 | V | Power supply voltage (absolute maximum rating) | 2 | |
| Operating ambient temperature | -40 | 85 | ℃ | Ambient operating temperature | 2 | ||
| Storage temperature range | -45 | 140 | ℃ | Storage | 2 | ||
| Thermal resistance, junction to ambient (SOT89) | θJA | 200 | ℃/W | Ambient, no air flow, no heatsink; SOT89 package | 2 | ||
| Power dissipation (SOT89) | PD | 0.5 | W | Ta=25℃; SOT89 package | 2 | ||
| Output capacitor (output to GND) | 2.2 | uF | Capacitor from output to GND; datasheet states it must be greater than 2.2uF | 5 |
CAD (KiCad official)
- Symbol:
SL7533-8 - Footprint:
Package_TO_SOT_SMD:SOT-89-3 - 3D model: SOT-89-3 (KiCad packages3D, STEP)
- 3D model files:
sl7533-8-etched.step/sl7533-8-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);sl7533-8.step/sl7533-8.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Slkor SLKORMICRO Elec datasheet (8 pp, sha256
3e2caad6c030d3ab, retrieved 2026-10-18, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# SL7533-8
**Slkor SLKORMICRO Elec** · Voltage Regulators - Linear, Low Drop Out (LDO) Regulators · SOT-89-3
SL7533-8 from Slkor SLKORMICRO Elec, in a SOT-89-3. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | GND | power_in | Ground pin for the regulator, as listed in the pin table for the series. |
| 2 | VIN | power_in | Input pin; the input voltage must not exceed the 36 V maximum rating (absolute limit -0.3 V to +36 V). |
| 3 | VOUT | power_out | Regulated 3.3 V output (3.234 V to 3.366 V at 10 mA) with at least 70 mA output current at VIN = VOUT + 2 V; the datasheet requires an output-to-ground capacitor greater than 2.2 µF. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Slkor SLKORMICRO Elec |
| Package | SOT-89-3 |
| Category | Power Management (PMIC) |
| Pins | 3 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Output voltage (3.3V variant) | VOUT | 3.234 | 3.3 | 3.366 | V | VIN=VOUT+2V, IOUT=10mA | 3 |
| Output current | IOUT | 70 | 100 | | mA | VIN=VOUT+2V | 3 |
| Load regulation | ΔVOUT | | 25 | 60 | mV | VIN=VOUT+2V, 1mA ≤ IOUT ≤ 50mA | 3 |
| Dropout voltage | VDIF | | 2 | 4 | mV | IOUT=1mA, ΔVo=2% | 3 |
| Quiescent current (static current) | ISS | | 2 | 3 | uA | No load | 3 |
| Input voltage regulation (line regulation) | | | | 0.2 | %/V | Vo+1V≤VIN≤36V, IOUT=1mA | 3 |
| Temperature coefficient | | | 100 | | ppm/℃ | IOUT=10mA, -40℃<Ta<85℃ | 3 |
| Input voltage | VIN | -0.3 | | 36 | V | Power supply voltage (absolute maximum rating) | 2 |
| Operating ambient temperature | | -40 | | 85 | ℃ | Ambient operating temperature | 2 |
| Storage temperature range | | -45 | | 140 | ℃ | Storage | 2 |
| Thermal resistance, junction to ambient (SOT89) | θJA | | | 200 | ℃/W | Ambient, no air flow, no heatsink; SOT89 package | 2 |
| Power dissipation (SOT89) | PD | | | 0.5 | W | Ta=25℃; SOT89 package | 2 |
| Output capacitor (output to GND) | | 2.2 | | | uF | Capacitor from output to GND; datasheet states it must be greater than 2.2uF | 5 |
## CAD (KiCad official)
- Symbol: `SL7533-8`
- Footprint: `Package_TO_SOT_SMD:SOT-89-3`
- 3D model: SOT-89-3 (KiCad packages3D, STEP)
- 3D model files: `sl7533-8-etched.step` / `sl7533-8-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `sl7533-8.step` / `sl7533-8.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Slkor SLKORMICRO Elec datasheet](https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588904259564023808) (8 pp, sha256 `3e2caad6c030d3ab`, retrieved 2026-10-18, tier: lcsc)
- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/sl7533-8-datasheet.pdf)