← Commit history
Publish 0.1.1
8 files changed
+105−96
README.md+24−26@@ -8,27 +8,27 @@ SL6243A from CoreChips, in a QFN-20-EP(3x3). Pinout and pin descriptions extract | Pin | Name | Type | Function | |---|---|---|---|-| 1 | UDM | bidirectional | Upstream port USB D- signal line of the HUB, a bidirectional USB 2.0 data pin. |-| 2 | UDP | bidirectional | Upstream port USB D+ signal line of the HUB, a bidirectional USB 2.0 data pin. |-| 3 | RESET_N | input | External active-low reset input with internal pull-up; a reset pulse longer than 15 ms is required, and it is wired-AND with the internal POR. |-| 4 | VbusValid | input | VBUS input detection with internal pull-down: 0 places the HUB in the invalid state and 1 places it in the working state. |-| 5 | PSELF | input | Self-power/bus-power select with internal pull-up: default is self-powered, and a low level selects bus-powered operation. |-| 6 | VCC5 | power_in | 5 V supply input that feeds the internal LDO producing 3.3 V; the supply range is 4.0 V to 5.25 V. |-| 7 | VDD33 | power_out | Internal LDO 3.3 V output that requires an external 4.7 uF capacitor to ground. |-| 8 | VDD12 | power_out | Internal LDO 1.2 V output that requires an external 2.2-4.7 uF capacitor to ground. |-| 9 | DRV | bidirectional | LED drive output with internal pull-up; at power-up it is also the active-low BC1.2 configuration input, with BC1.2 disabled by default. |-| 10 | VSS | power_in | Chip ground pin. |-| 11 | XOUT | output | Crystal oscillator output for an external 12 MHz crystal (ESRmax 80 ohm, CL 12 pF). |-| 12 | XIN | input | Crystal oscillator input for an external 12 MHz crystal (ESRmax 80 ohm, CL 12 pF). |-| 13 | DP4 | bidirectional | Downstream port 4 USB D+ signal line, a bidirectional USB 2.0 data pin. |-| 14 | DM4 | bidirectional | Downstream port 4 USB D- signal line, a bidirectional USB 2.0 data pin. |-| 15 | DM3 | bidirectional | Downstream port 3 USB D- signal line, a bidirectional USB 2.0 data pin. |-| 16 | DP3 | bidirectional | Downstream port 3 USB D+ signal line, a bidirectional USB 2.0 data pin. |-| 17 | DM2 | bidirectional | Downstream port 2 USB D- signal line, a bidirectional USB 2.0 data pin. |-| 18 | DP2 | bidirectional | Downstream port 2 USB D+ signal line, a bidirectional USB 2.0 data pin. |-| 19 | DM1 | bidirectional | Downstream port 1 USB D- signal line, a bidirectional USB 2.0 data pin. |-| 20 | DP1 | bidirectional | Downstream port 1 USB D+ signal line, a bidirectional USB 2.0 data pin. |-| 21 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |+| 1 | UDM | bidirectional | Upstream port USB 2.0 D- signal line. |+| 2 | UDP | bidirectional | Upstream port USB 2.0 D+ signal line. |+| 3 | RESET_N | input | External active-low reset input with internal pull-up, wire-ANDed with the internal power-on reset; the datasheet states an external reset pulse width greater than 15 ms. |+| 4 | VbusValid | input | VBUS input detect with internal pull-down: 0 = hub inactive state, 1 = hub operating state. |+| 5 | PSELF | input | Self-powered/bus-powered select with internal pull-up: default self-powered, low selects bus-powered operation. |+| 6 | VCC5 | power_in | 5 V supply input that feeds the internal 3.3 V LDO. |+| 7 | VDD33 | power_out | Output of the internal 3.3 V LDO; requires an external 4.7 uF capacitor to ground, placed close to pin 7. |+| 8 | VDD12 | power_out | Output of the internal 1.2 V LDO; requires an external 2.2-4.7 uF capacitor to ground, placed close to pin 8. |+| 9 | DRV | bidirectional | LED drive signal with internal pull-up; during power-up it is the active-low BC1.2 configuration input (0 = BC1.2 enabled, 1 = BC1.2 disabled, default disabled). |+| 10 | VSS | power_in | Chip ground. |+| 11 | XOUT | output | Crystal oscillator output for an external 12 MHz crystal. |+| 12 | XIN | input | Crystal oscillator input for an external 12 MHz crystal. |+| 13 | DP4 | bidirectional | Downstream port 4 USB D+ signal line. |+| 14 | DM4 | bidirectional | Downstream port 4 USB D- signal line. |+| 15 | DM3 | bidirectional | Downstream port 3 USB D- signal line. |+| 16 | DP3 | bidirectional | Downstream port 3 USB D+ signal line. |+| 17 | DM2 | bidirectional | Downstream port 2 USB D- signal line. |+| 18 | DP2 | bidirectional | Downstream port 2 USB D+ signal line. |+| 19 | DM1 | bidirectional | Downstream port 1 USB D- signal line. |+| 20 | DP1 | bidirectional | Downstream port 1 USB D+ signal line. |+| 21 | VSS | passive | Exposed pad (from the footprint; not named in the datasheet pin table). | ## Key specifications @@ -45,19 +45,17 @@ Limits as printed in the datasheet (page.json `metadata.characteristics` carries | Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page | |---|---|---|---|---|---|---|---|-| Power Supply | VDDM | -0.5 | | 5.5 | V | | 9 |+| Power Supply (VDDM) | VDDM | -0.5 | | 5.5 | V | | 9 | | Input Voltage for digital I/O | VIN | -0.5 | | 5.5 | V | | 9 | | Input Voltage for USB signal (DP, DM) pins | VINUSB | -0.5 | | 5.5 | V | | 9 | | Storage Temperature under bias | TS | -60 | | 125 | ℃ | | 9 |-| Frequency tolerance (12 MHz nominal) | FOSC | -0.05 | | 0.05 | % | | 9 |+| Oscillator frequency tolerance (nominal 12 MHz, printed as 12 MHz ± 0.05%) | FOSC | -0.05 | | 0.05 | % | | 9 | | Power Supply | VDD | 4 | 5 | 5.25 | V | | 9 | | Input Voltage for digital I/O pins | VIND | -0.5 | 3.3 | 3.63 | V | | 9 | | Input Voltage for USB signal (DP, DM) pins | VINUSB | -0.5 | 3.3 | 3.63 | V | | 9 | | Ambient Temperature | TA | -40 | | 85 | ℃ | | 9 | | Supply Current | IDD | 50 | | 120 | mA | | 9 | | Suspend Current | ISUS | | | 2.5 | mA | | 9 |-| Port ESD capability (HBM) | | -2 | | 2 | kV | HBM | 11 |-| External reset pulse width | | 15 | | | ms | | 7 | ## CAD (KiCad official) @@ -70,7 +68,7 @@ Limits as printed in the datasheet (page.json `metadata.characteristics` carries Data extracted from the manufacturer datasheet, not a distributor listing: -- **Datasheet:** [CoreChips datasheet](docs/sl6243a-datasheet.pdf) (12 pp, sha256 `552e74260ab43284`, retrieved 2026-11-10, tier: lcsc)+- **Datasheet:** [CoreChips datasheet](docs/sl6243a-datasheet.pdf) (12 pp, sha256 `552e74260ab43284`, retrieved 2026-11-11, tier: lcsc) - **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original. - **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - **CAD:** KiCad official libraries (CC-BY-SA 4.0).
package.json+30−30@@ -1,6 +1,6 @@ { "slug": "sl6243a",- "version": "0.1.0",+ "version": "0.1.1", "type": "component", "description": "CoreChips USB HUB Controllers, QFN-20-EP(3x3). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.", "tags": [@@ -52,7 +52,7 @@ "lcsc": "C48391681" }, "distributor_check": {- "checked_at": "2026-11-10T08:04:50Z",+ "checked_at": "2026-11-11T00:07:49Z", "source": "Component Ocean /api/assign-pns", "digikey": { "pn": null,@@ -68,125 +68,125 @@ "number": "1", "name": "UDM", "type": "bidirectional",- "description": "Upstream port USB D- signal line of the HUB, a bidirectional USB 2.0 data pin."+ "description": "Upstream port USB 2.0 D- signal line." }, { "number": "2", "name": "UDP", "type": "bidirectional",- "description": "Upstream port USB D+ signal line of the HUB, a bidirectional USB 2.0 data pin."+ "description": "Upstream port USB 2.0 D+ signal line." }, { "number": "3", "name": "RESET_N", "type": "input",- "description": "External active-low reset input with internal pull-up; a reset pulse longer than 15 ms is required, and it is wired-AND with the internal POR."+ "description": "External active-low reset input with internal pull-up, wire-ANDed with the internal power-on reset; the datasheet states an external reset pulse width greater than 15 ms." }, { "number": "4", "name": "VbusValid", "type": "input",- "description": "VBUS input detection with internal pull-down: 0 places the HUB in the invalid state and 1 places it in the working state."+ "description": "VBUS input detect with internal pull-down: 0 = hub inactive state, 1 = hub operating state." }, { "number": "5", "name": "PSELF", "type": "input",- "description": "Self-power/bus-power select with internal pull-up: default is self-powered, and a low level selects bus-powered operation."+ "description": "Self-powered/bus-powered select with internal pull-up: default self-powered, low selects bus-powered operation." }, { "number": "6", "name": "VCC5", "type": "power_in",- "description": "5 V supply input that feeds the internal LDO producing 3.3 V; the supply range is 4.0 V to 5.25 V."+ "description": "5 V supply input that feeds the internal 3.3 V LDO." }, { "number": "7", "name": "VDD33", "type": "power_out",- "description": "Internal LDO 3.3 V output that requires an external 4.7 uF capacitor to ground."+ "description": "Output of the internal 3.3 V LDO; requires an external 4.7 uF capacitor to ground, placed close to pin 7." }, { "number": "8", "name": "VDD12", "type": "power_out",- "description": "Internal LDO 1.2 V output that requires an external 2.2-4.7 uF capacitor to ground."+ "description": "Output of the internal 1.2 V LDO; requires an external 2.2-4.7 uF capacitor to ground, placed close to pin 8." }, { "number": "9", "name": "DRV", "type": "bidirectional",- "description": "LED drive output with internal pull-up; at power-up it is also the active-low BC1.2 configuration input, with BC1.2 disabled by default."+ "description": "LED drive signal with internal pull-up; during power-up it is the active-low BC1.2 configuration input (0 = BC1.2 enabled, 1 = BC1.2 disabled, default disabled)." }, { "number": "10", "name": "VSS", "type": "power_in",- "description": "Chip ground pin."+ "description": "Chip ground." }, { "number": "11", "name": "XOUT", "type": "output",- "description": "Crystal oscillator output for an external 12 MHz crystal (ESRmax 80 ohm, CL 12 pF)."+ "description": "Crystal oscillator output for an external 12 MHz crystal." }, { "number": "12", "name": "XIN", "type": "input",- "description": "Crystal oscillator input for an external 12 MHz crystal (ESRmax 80 ohm, CL 12 pF)."+ "description": "Crystal oscillator input for an external 12 MHz crystal." }, { "number": "13", "name": "DP4", "type": "bidirectional",- "description": "Downstream port 4 USB D+ signal line, a bidirectional USB 2.0 data pin."+ "description": "Downstream port 4 USB D+ signal line." }, { "number": "14", "name": "DM4", "type": "bidirectional",- "description": "Downstream port 4 USB D- signal line, a bidirectional USB 2.0 data pin."+ "description": "Downstream port 4 USB D- signal line." }, { "number": "15", "name": "DM3", "type": "bidirectional",- "description": "Downstream port 3 USB D- signal line, a bidirectional USB 2.0 data pin."+ "description": "Downstream port 3 USB D- signal line." }, { "number": "16", "name": "DP3", "type": "bidirectional",- "description": "Downstream port 3 USB D+ signal line, a bidirectional USB 2.0 data pin."+ "description": "Downstream port 3 USB D+ signal line." }, { "number": "17", "name": "DM2", "type": "bidirectional",- "description": "Downstream port 2 USB D- signal line, a bidirectional USB 2.0 data pin."+ "description": "Downstream port 2 USB D- signal line." }, { "number": "18", "name": "DP2", "type": "bidirectional",- "description": "Downstream port 2 USB D+ signal line, a bidirectional USB 2.0 data pin."+ "description": "Downstream port 2 USB D+ signal line." }, { "number": "19", "name": "DM1", "type": "bidirectional",- "description": "Downstream port 1 USB D- signal line, a bidirectional USB 2.0 data pin."+ "description": "Downstream port 1 USB D- signal line." }, { "number": "20", "name": "DP1", "type": "bidirectional",- "description": "Downstream port 1 USB D+ signal line, a bidirectional USB 2.0 data pin."+ "description": "Downstream port 1 USB D+ signal line." }, { "number": "21",- "name": "EP",+ "name": "VSS", "type": "passive", "description": "Exposed pad (from the footprint; not named in the datasheet pin table)." }@@ -202,13 +202,13 @@ "consensus": "agreed", "guards": "pin_guards 0.1: passed", "guard_notes": [- "extractor flagged: The datasheet's pin table (page 6) gives the exposed pad as 'VSS EPAD' and does not number it; it is",+ "extractor flagged: The datasheet pin table marks VDD33 and VDD12 as type 'P' (power). They are LDO outputs, so I classe; The exposed pad is printed as 'EPAD' in the datasheet, not as a number; it is listed as EPAD rather ; The pinout figure on page 5 is an image and was not readable as text; pin numbers and names were tak", "exposed pad 21 added from the footprint", "dropped thermal pad ['EP'] absent from footprint" ], "pages_sent": 12,- "cost_usd": 0.038,- "at": "2026-11-10T08:04:32"+ "cost_usd": 0.0412,+ "at": "2026-11-11T00:07:30" }, "datasheet": { "url": "https://datasheet.lcsc.com/datasheet/pdf/81f2f1a492ae40510970c59cfa2e04a4.pdf",@@ -251,8 +251,8 @@ "zmin_mm": 0.0, "centre_offset_mm": 0.0, "footprint_binding": "identity",- "sha256": "478145352c3818340af0d86c3da548f9deecb86b03114277dd2fab139bffa04b",- "checked": "2026-11-10",+ "sha256": "acd01a65f3af9bafc34e484b9e991c29c8196b9b7332c3766feda4a496dce926",+ "checked": "2026-11-11", "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)" }, {@@ -270,8 +270,8 @@ "zmin_mm": 0.0, "centre_offset_mm": 0.0, "footprint_binding": "identity",- "sha256": "5d25d35e6bf307c8910abbede449ee6d0ba7f81371c5f29680fe4be55cd043f9",- "checked": "2026-11-10",+ "sha256": "98ca77558f25abc0dcdcb8d4aea923997c7ee21ed85039768d479c8838a7117b",+ "checked": "2026-11-11", "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)" } ],
page.json+33−31@@ -4,7 +4,7 @@ "slug": "sl6243a", "title": "SL6243A", "brief": "CoreChips USB HUB Controllers, QFN-20-EP(3x3). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",- "version": "0.1.0",+ "version": "0.1.1", "license": "CC-BY-SA-4.0", "tags": [ "component",@@ -34,7 +34,7 @@ "lcsc": "C48391681" }, "distributor_check": {- "checked_at": "2026-11-10T08:04:50Z",+ "checked_at": "2026-11-11T00:07:49Z", "source": "Component Ocean /api/assign-pns", "digikey": { "pn": null,@@ -50,125 +50,125 @@ "number": "1", "name": "UDM", "type": "bidirectional",- "description": "Upstream port USB D- signal line of the HUB, a bidirectional USB 2.0 data pin."+ "description": "Upstream port USB 2.0 D- signal line." }, { "number": "2", "name": "UDP", "type": "bidirectional",- "description": "Upstream port USB D+ signal line of the HUB, a bidirectional USB 2.0 data pin."+ "description": "Upstream port USB 2.0 D+ signal line." }, { "number": "3", "name": "RESET_N", "type": "input",- "description": "External active-low reset input with internal pull-up; a reset pulse longer than 15 ms is required, and it is wired-AND with the internal POR."+ "description": "External active-low reset input with internal pull-up, wire-ANDed with the internal power-on reset; the datasheet states an external reset pulse width greater than 15 ms." }, { "number": "4", "name": "VbusValid", "type": "input",- "description": "VBUS input detection with internal pull-down: 0 places the HUB in the invalid state and 1 places it in the working state."+ "description": "VBUS input detect with internal pull-down: 0 = hub inactive state, 1 = hub operating state." }, { "number": "5", "name": "PSELF", "type": "input",- "description": "Self-power/bus-power select with internal pull-up: default is self-powered, and a low level selects bus-powered operation."+ "description": "Self-powered/bus-powered select with internal pull-up: default self-powered, low selects bus-powered operation." }, { "number": "6", "name": "VCC5", "type": "power_in",- "description": "5 V supply input that feeds the internal LDO producing 3.3 V; the supply range is 4.0 V to 5.25 V."+ "description": "5 V supply input that feeds the internal 3.3 V LDO." }, { "number": "7", "name": "VDD33", "type": "power_out",- "description": "Internal LDO 3.3 V output that requires an external 4.7 uF capacitor to ground."+ "description": "Output of the internal 3.3 V LDO; requires an external 4.7 uF capacitor to ground, placed close to pin 7." }, { "number": "8", "name": "VDD12", "type": "power_out",- "description": "Internal LDO 1.2 V output that requires an external 2.2-4.7 uF capacitor to ground."+ "description": "Output of the internal 1.2 V LDO; requires an external 2.2-4.7 uF capacitor to ground, placed close to pin 8." }, { "number": "9", "name": "DRV", "type": "bidirectional",- "description": "LED drive output with internal pull-up; at power-up it is also the active-low BC1.2 configuration input, with BC1.2 disabled by default."+ "description": "LED drive signal with internal pull-up; during power-up it is the active-low BC1.2 configuration input (0 = BC1.2 enabled, 1 = BC1.2 disabled, default disabled)." }, { "number": "10", "name": "VSS", "type": "power_in",- "description": "Chip ground pin."+ "description": "Chip ground." }, { "number": "11", "name": "XOUT", "type": "output",- "description": "Crystal oscillator output for an external 12 MHz crystal (ESRmax 80 ohm, CL 12 pF)."+ "description": "Crystal oscillator output for an external 12 MHz crystal." }, { "number": "12", "name": "XIN", "type": "input",- "description": "Crystal oscillator input for an external 12 MHz crystal (ESRmax 80 ohm, CL 12 pF)."+ "description": "Crystal oscillator input for an external 12 MHz crystal." }, { "number": "13", "name": "DP4", "type": "bidirectional",- "description": "Downstream port 4 USB D+ signal line, a bidirectional USB 2.0 data pin."+ "description": "Downstream port 4 USB D+ signal line." }, { "number": "14", "name": "DM4", "type": "bidirectional",- "description": "Downstream port 4 USB D- signal line, a bidirectional USB 2.0 data pin."+ "description": "Downstream port 4 USB D- signal line." }, { "number": "15", "name": "DM3", "type": "bidirectional",- "description": "Downstream port 3 USB D- signal line, a bidirectional USB 2.0 data pin."+ "description": "Downstream port 3 USB D- signal line." }, { "number": "16", "name": "DP3", "type": "bidirectional",- "description": "Downstream port 3 USB D+ signal line, a bidirectional USB 2.0 data pin."+ "description": "Downstream port 3 USB D+ signal line." }, { "number": "17", "name": "DM2", "type": "bidirectional",- "description": "Downstream port 2 USB D- signal line, a bidirectional USB 2.0 data pin."+ "description": "Downstream port 2 USB D- signal line." }, { "number": "18", "name": "DP2", "type": "bidirectional",- "description": "Downstream port 2 USB D+ signal line, a bidirectional USB 2.0 data pin."+ "description": "Downstream port 2 USB D+ signal line." }, { "number": "19", "name": "DM1", "type": "bidirectional",- "description": "Downstream port 1 USB D- signal line, a bidirectional USB 2.0 data pin."+ "description": "Downstream port 1 USB D- signal line." }, { "number": "20", "name": "DP1", "type": "bidirectional",- "description": "Downstream port 1 USB D+ signal line, a bidirectional USB 2.0 data pin."+ "description": "Downstream port 1 USB D+ signal line." }, { "number": "21",- "name": "EP",+ "name": "VSS", "type": "passive", "description": "Exposed pad (from the footprint; not named in the datasheet pin table)." }@@ -184,13 +184,13 @@ "consensus": "agreed", "guards": "pin_guards 0.1: passed", "guard_notes": [- "extractor flagged: The datasheet's pin table (page 6) gives the exposed pad as 'VSS EPAD' and does not number it; it is",+ "extractor flagged: The datasheet pin table marks VDD33 and VDD12 as type 'P' (power). They are LDO outputs, so I classe; The exposed pad is printed as 'EPAD' in the datasheet, not as a number; it is listed as EPAD rather ; The pinout figure on page 5 is an image and was not readable as text; pin numbers and names were tak", "exposed pad 21 added from the footprint", "dropped thermal pad ['EP'] absent from footprint" ], "pages_sent": 12,- "cost_usd": 0.038,- "at": "2026-11-10T08:04:32"+ "cost_usd": 0.0412,+ "at": "2026-11-11T00:07:30" }, "datasheet": { "url": "https://datasheet.lcsc.com/datasheet/pdf/81f2f1a492ae40510970c59cfa2e04a4.pdf",@@ -233,8 +233,8 @@ "zmin_mm": 0, "centre_offset_mm": 0, "footprint_binding": "identity",- "sha256": "478145352c3818340af0d86c3da548f9deecb86b03114277dd2fab139bffa04b",- "checked": "2026-11-10",+ "sha256": "acd01a65f3af9bafc34e484b9e991c29c8196b9b7332c3766feda4a496dce926",+ "checked": "2026-11-11", "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)" }, {@@ -252,8 +252,8 @@ "zmin_mm": 0, "centre_offset_mm": 0, "footprint_binding": "identity",- "sha256": "5d25d35e6bf307c8910abbede449ee6d0ba7f81371c5f29680fe4be55cd043f9",- "checked": "2026-11-10",+ "sha256": "98ca77558f25abc0dcdcb8d4aea923997c7ee21ed85039768d479c8838a7117b",+ "checked": "2026-11-11", "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)" } ],@@ -502,5 +502,7 @@ ], "visibility": { "public": true- }+ },+ "description": "CoreChips USB HUB Controllers, QFN-20-EP(3x3). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",+ "org": "adom" }
sl6243a-hero.glb⋯ 1 unchanged line ⋯
sl6243a-hero.overlay.json+2−2@@ -74,9 +74,9 @@ "footprint": "sl6243a.kicad_mod", "footprint_sha256": "497b88988019233f22a1e463031d3e30bb0c1014badb3a86a5d527272af2e225", "pins": "page.json component.pins",- "pins_sha256": "a1858815bd6de215196a7fe5dd8d47ce94ec0610a1b8e88b5287a1f626c6f0f7"+ "pins_sha256": "a1448681ced9a56be347aabef50daf0e4e393426a5dfa84ad8f930f7020273ab" },- "generator": "adom-wiki 1.8.15 (component_hero)",+ "generator": "adom-wiki 1.8.18 (component_hero)", "labels": [ { "pad": "1",
sl6243a.kicad_sym+1−1@@ -53,7 +53,7 @@ (number "11" (effects (font (size 1.27 1.27)))) ) (pin passive line (at 17.78 10.16 180) (length 5.08)- (name "EP" (effects (font (size 1.27 1.27))))+ (name "VSS" (effects (font (size 1.27 1.27)))) (number "21" (effects (font (size 1.27 1.27)))) ) (pin bidirectional line (at 17.78 7.62 180) (length 5.08)
sl6243a.lbr+14−5@@ -50,7 +50,7 @@ <layer number="98" name="Guide" color="6" fill="1" visible="yes" active="yes"/> </layers> <library>-<description></description>+<description>CoreChips USB HUB Controllers, QFN-20-EP(3x3). Pinout cross-checked by two models against the datasheet</description> <packages> <package name="QFN-20-1EP_3x3mm_P0.4mm_EP1.65x1.65mm"> <description>QFN-20-1EP, 3 x 3 mm, 0.4 mm pitch</description>@@ -101,6 +101,7 @@ </packages> <symbols> <symbol name="SL6243A">+ <description>CoreChips USB HUB Controllers, QFN-20-EP(3x3). Pinout cross-checked by two models against the datasheet</description> <wire x1="-12.7" y1="15.24" x2="12.7" y2="15.24" width="0.254" layer="94"/> <wire x1="12.7" y1="15.24" x2="12.7" y2="-15.24" width="0.254" layer="94"/> <wire x1="12.7" y1="-15.24" x2="-12.7" y2="-15.24" width="0.254" layer="94"/>@@ -118,7 +119,7 @@ <pin name="DRV" x="-17.78" y="-7.62" length="middle" direction="io"/> <pin name="VSS" x="-17.78" y="-10.16" length="middle" direction="pwr"/> <pin name="XOUT" x="-17.78" y="-12.7" length="middle" direction="out"/>- <pin name="EP" x="17.78" y="10.16" length="middle" direction="pas" rot="R180"/>+ <pin name="VSS@2" x="17.78" y="10.16" length="middle" direction="pas" rot="R180"/> <pin name="DP1" x="17.78" y="7.62" length="middle" direction="io" rot="R180"/> <pin name="DM1" x="17.78" y="5.08" length="middle" direction="io" rot="R180"/> <pin name="DP2" x="17.78" y="2.54" length="middle" direction="io" rot="R180"/>@@ -132,7 +133,7 @@ </symbols> <devicesets> <deviceset name="SL6243A" prefix="U">- <description></description>+ <description>CoreChips USB HUB Controllers, QFN-20-EP(3x3). Pinout cross-checked by two models against the datasheet</description> <gates> <gate name="G$1" symbol="SL6243A" x="0" y="0"/> </gates>@@ -150,7 +151,7 @@ <connect gate="G$1" pin="DRV" pad="9"/> <connect gate="G$1" pin="VSS" pad="10"/> <connect gate="G$1" pin="XOUT" pad="11"/>- <connect gate="G$1" pin="EP" pad="21"/>+ <connect gate="G$1" pin="VSS@2" pad="21"/> <connect gate="G$1" pin="DP1" pad="20"/> <connect gate="G$1" pin="DM1" pad="19"/> <connect gate="G$1" pin="DP2" pad="18"/>@@ -161,7 +162,15 @@ <connect gate="G$1" pin="DP4" pad="13"/> <connect gate="G$1" pin="XIN" pad="12"/> </connects>- <technologies><technology name=""/></technologies>+ <technologies>+ <technology name="">+ <attribute name="MPN" value="SL6243A" constant="no"/>+ <attribute name="MANUFACTURER" value="CoreChips" constant="no"/>+ <attribute name="DATASHEET" value="https://datasheet.lcsc.com/datasheet/pdf/81f2f1a492ae40510970c59cfa2e04a4.pdf" constant="no"/>+ <attribute name="ADOM_WIKI" value="https://wiki.adom.inc/adom/sl6243a" constant="no"/>+ <attribute name="LCSC_PN" value="C48391681" constant="no"/>+ </technology>+ </technologies> </device> </devices> </deviceset>
sl6243a.step+1−1@@ -1,7 +1,7 @@ ISO-10303-21; HEADER; FILE_DESCRIPTION(('Open CASCADE Model'),'2;1');-FILE_NAME('Open CASCADE Shape Model','2026-11-10T08:04:42',('Author'),(+FILE_NAME('Open CASCADE Shape Model','2026-11-11T00:07:41',('Author'),( 'Open CASCADE'),'Open CASCADE STEP processor 7.9','Open CASCADE 7.9' ,'Unknown'); FILE_SCHEMA(('AUTOMOTIVE_DESIGN { 1 0 10303 214 1 1 1 1 }'));