component
SL6206-33PR
Public Made by Adomby adom
Slkor SLKORMICRO Elec Voltage Regulators - Linear, Low Drop Out (LDO) Regulators, SOT-89-3. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownSL6206-33PR
Slkor SLKORMICRO Elec · Voltage Regulators - Linear, Low Drop Out (LDO) Regulators · SOT-89-3
SL6206-33PR from Slkor SLKORMICRO Elec, in a SOT-89-3. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VSS | power_in | Chip ground terminal, the device ground reference; the output voltage is limited to a minimum of Vss-0.3 V. |
| 2 | VIN | power_in | Input supply terminal (labeled 启动输入端, start-up input) with an absolute maximum input voltage of 6.5 V. |
| 3 | VOUT | power_out | Regulated output terminal; output current is limited to 300 mA absolute maximum and the output voltage must stay within Vss-0.3 V to Vout+0.3 V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Slkor SLKORMICRO Elec |
| Package | SOT-89-3 |
| Category | Power Management (PMIC) |
| Pins | 3 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Output voltage tolerance | -2.5 | 2.5 | % | 2 | |||
| Output voltage temperature coefficient | ΔVOUT/(ΔTa•VOUT) | -100 | 100 | ppm/℃ | VIN=VOUT(T)+1V, IOUT=10mA, -40℃≤Ta≤85℃ | 3 | |
| Maximum output current | IOUT (max) | 100 | mA | VIN=VOUT(T)+1V | 3 | ||
| Dropout voltage | Vdrop | 160 | 240 | mV | IOUT=50mA, 2.6V≤VOUT(T)≤3.3V | 3 | |
| Quiescent current | ISS | 7 | μA | VIN=VOUT(T)+1V | 3 | ||
| Load regulation | ΔVOUT | 20 | mV | VIN=VOUT(T)+1V, 1mA≤IOUT≤80mA | 3 | ||
| Input stability | ΔVOUT/(ΔVIN•VOUT) | 0.1 | 0.2 | %/V | IOUT=1mA, VOUT(T)+0.5V≤VIN≤5.5V | 3 | |
| Input voltage | VIN | 1.8 | 8 | V | 3 | ||
| Ripple rejection ratio | PSRR | 40 | dB | VIN=[VOUT(T)+1]V +1Vp-pAC, IOUT=10mA, f=1kHz | 3 | ||
| Short-circuit current | Ishort | 30 | mA | VIN=VOUT(T)+1.5V, VOUT=VSS | 3 | ||
| Overcurrent protection current | Ilimt | 380 | mA | VIN=VOUT(T)+1.5V | 3 | ||
| Output voltage (effective) | VOUT(E) | 3.3 | V | IOUT=1mA, VIN=VOUT(T)+1V | 3 | ||
| Input voltage (absolute maximum) | Vin | 6.5 | V | 2 | |||
| Output voltage (absolute maximum) | Vout | -0.3 | V | Vss-0.3 ~ Vout+0.3 as printed; min relative to VSS; max printed as Vout+0.3 | 2 | ||
| Output current (absolute maximum) | Iout | 300 | mA | 2 | |||
| Maximum power dissipation SOT89-3 | PD | 500 | mW | SOT89-3 package | 2 | ||
| Operating temperature | Tw | -25 | 80 | ℃ | 2 | ||
| Storage temperature | Tc | -40 | 125 | ℃ | 2 | ||
| Soldering temperature | Th | 260 | ℃ | 10 s | 2 |
CAD (KiCad official)
- Symbol:
SL6206-33PR - Footprint:
Package_TO_SOT_SMD:SOT-89-3 - 3D model: SOT-89-3 (KiCad packages3D, STEP)
- 3D model files:
sl6206-33pr-etched.step/sl6206-33pr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);sl6206-33pr.step/sl6206-33pr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Slkor SLKORMICRO Elec datasheet (8 pp, sha256
fb547465ac127a4b, retrieved 2026-10-18, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).