component
SL6206-33NR
Public Made by Adomby adom
Slkor SLKORMICRO Elec Voltage Regulators - Linear, Low Drop Out (LDO) Regulators, SOT-23-3L. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
main
SL6206-33NR
Slkor SLKORMICRO Elec · Voltage Regulators - Linear, Low Drop Out (LDO) Regulators · SOT-23-3L
SL6206-33NR from Slkor SLKORMICRO Elec, in a SOT-23-3L. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | GND | power_in | Ground pin (接地端) for the regulator; the datasheet gives no separate electrical limit for this pin. |
| 2 | VOUT | power_out | Regulated output pin; the datasheet limits output current to 450 mA absolute maximum, rates the pin voltage at Vss-0.3 V to Vout+0.3 V, and specifies a 300 mA typical maximum output current. |
| 3 | VDD | power_in | Supply input and input-voltage sense pin (芯片供电电源及待检测电压输入脚); the datasheet gives an absolute maximum of 6 V and a recommended input range of 1.6 V to 5.5 V, with VIN at least Vout+1 V for specified performance. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Slkor SLKORMICRO Elec |
| Package | SOT-23-3L |
| Category | Power Management (PMIC) |
| Pins | 3 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Output voltage accuracy (VOUT(E) vs VOUT(T)) | VOUT(E) | 0.98 | 1.02 | X | IOUT=40mA; VOUT(T) = specified output voltage (Note 1) | 5 | |
| Load regulation | ΔVOUT | 50 | mV | VIN=VOUT+1V, 1mA≤IOUT≤100mA | 5 | ||
| Dropout voltage (Vdif1) | Vdif1 | 90 | mV | IOUT=100mA | 5 | ||
| Dropout voltage (Vdif2) | Vdif2 | 230 | mV | IOUT=200mA | 5 | ||
| Line regulation | ΔVOUT/(ΔVIN·VOUT) | 0.05 | %/V | IOUT=40mA, VOUT+1V ≤ VIN ≤ 8V | 5 | ||
| Shutdown current | ICEL | 1 | μA | VCE=0V | 5 | ||
| Maximum output current | IOUTmax | 300 | mA | VIN=VOUT+1V | 5 | ||
| Quiescent current | ISS | 70 | μA | VIN=VOUT+1V | 5 | ||
| Output noise voltage | en | 50 | uVrms | IOUT=40mA, 300Hz~50kHz | 5 | ||
| Power supply rejection ratio | PSRR | 70 | dB | VIN=[VOUT+1]V +1Vp-pAC, IOUT=40mA, f=1kHz | 5 | ||
| Input voltage (absolute maximum) | VIN | 6 | V | VIN pin voltage | 3 | ||
| Output current (absolute maximum) | Iout | 450 | mA | VOUT pin current | 3 | ||
| Operating temperature | TOpr | -40 | 85 | ℃ | 3 | ||
| Storage temperature | Tstg | -55 | 125 | ℃ | 3 | ||
| Soldering temperature | Tsolder | 260 | ℃ | 10 s | 3 | ||
| Package power dissipation (SOT-23-3L) | Pd | 300 | mW | SOT-23-3L package | 3 |
CAD (KiCad official)
- Symbol:
SL6206-33NR - Footprint:
Package_TO_SOT_SMD:SOT-23-3 - 3D model: SOT-23-3L (KiCad packages3D, STEP)
- 3D model files:
sl6206-33nr-etched.step/sl6206-33nr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);sl6206-33nr.step/sl6206-33nr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Slkor SLKORMICRO Elec datasheet (5 pp, sha256
d22198dc66276a60, retrieved 2026-10-15, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# SL6206-33NR
**Slkor SLKORMICRO Elec** · Voltage Regulators - Linear, Low Drop Out (LDO) Regulators · SOT-23-3L
SL6206-33NR from Slkor SLKORMICRO Elec, in a SOT-23-3L. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | GND | power_in | Ground pin (接地端) for the regulator; the datasheet gives no separate electrical limit for this pin. |
| 2 | VOUT | power_out | Regulated output pin; the datasheet limits output current to 450 mA absolute maximum, rates the pin voltage at Vss-0.3 V to Vout+0.3 V, and specifies a 300 mA typical maximum output current. |
| 3 | VDD | power_in | Supply input and input-voltage sense pin (芯片供电电源及待检测电压输入脚); the datasheet gives an absolute maximum of 6 V and a recommended input range of 1.6 V to 5.5 V, with VIN at least Vout+1 V for specified performance. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Slkor SLKORMICRO Elec |
| Package | SOT-23-3L |
| Category | Power Management (PMIC) |
| Pins | 3 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Output voltage accuracy (VOUT(E) vs VOUT(T)) | VOUT(E) | 0.98 | | 1.02 | X | IOUT=40mA; VOUT(T) = specified output voltage (Note 1) | 5 |
| Load regulation | ΔVOUT | | | 50 | mV | VIN=VOUT+1V, 1mA≤IOUT≤100mA | 5 |
| Dropout voltage (Vdif1) | Vdif1 | | | 90 | mV | IOUT=100mA | 5 |
| Dropout voltage (Vdif2) | Vdif2 | | | 230 | mV | IOUT=200mA | 5 |
| Line regulation | ΔVOUT/(ΔVIN·VOUT) | | | 0.05 | %/V | IOUT=40mA, VOUT+1V ≤ VIN ≤ 8V | 5 |
| Shutdown current | ICEL | | | 1 | μA | VCE=0V | 5 |
| Maximum output current | IOUTmax | 300 | | | mA | VIN=VOUT+1V | 5 |
| Quiescent current | ISS | | 70 | | μA | VIN=VOUT+1V | 5 |
| Output noise voltage | en | | 50 | | uVrms | IOUT=40mA, 300Hz~50kHz | 5 |
| Power supply rejection ratio | PSRR | | 70 | | dB | VIN=[VOUT+1]V +1Vp-pAC, IOUT=40mA, f=1kHz | 5 |
| Input voltage (absolute maximum) | VIN | | | 6 | V | VIN pin voltage | 3 |
| Output current (absolute maximum) | Iout | | | 450 | mA | VOUT pin current | 3 |
| Operating temperature | TOpr | -40 | | 85 | ℃ | | 3 |
| Storage temperature | Tstg | -55 | | 125 | ℃ | | 3 |
| Soldering temperature | Tsolder | | | 260 | ℃ | 10 s | 3 |
| Package power dissipation (SOT-23-3L) | Pd | | | 300 | mW | SOT-23-3L package | 3 |
## CAD (KiCad official)
- Symbol: `SL6206-33NR`
- Footprint: `Package_TO_SOT_SMD:SOT-23-3`
- 3D model: SOT-23-3L (KiCad packages3D, STEP)
- 3D model files: `sl6206-33nr-etched.step` / `sl6206-33nr-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `sl6206-33nr.step` / `sl6206-33nr.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Slkor SLKORMICRO Elec datasheet](https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8590891526723612672) (5 pp, sha256 `d22198dc66276a60`, retrieved 2026-10-15, tier: lcsc)
- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/sl6206-33nr-datasheet.pdf)