component
SL6206-25NR
Public Made by Adomby adom
Slkor SLKORMICRO Elec Voltage Regulators - Linear, Low Drop Out (LDO) Regulators, SOT-23-3. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
Generated by kicad-footprint-generator · KiCad file format 20260206
| Name | Last updated |
|---|---|
| docs | 6h ago |
| viewers | 6h ago |
| package.json | 6h ago |
| page.json | 6h ago |
| README.md | 6h ago |
| sl6206-25nr-etched.glb | 6h ago |
| sl6206-25nr-etched.step | 6h ago |
| sl6206-25nr-hero.glb | 6h ago |
| sl6206-25nr-hero.overlay.json | 6h ago |
| sl6206-25nr.glb | 6h ago |
| sl6206-25nr.kicad_mod | 6h ago |
| sl6206-25nr.kicad_sym | 6h ago |
| sl6206-25nr.lbr | 6h ago |
| sl6206-25nr.step | 6h ago |
SL6206-25NR
Slkor SLKORMICRO Elec · Voltage Regulators - Linear, Low Drop Out (LDO) Regulators · SOT-23-3
SL6206-25NR from Slkor SLKORMICRO Elec, in a SOT-23-3. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | GND | power_in | Ground pin (接地端) and reference for the regulator; the datasheet gives no separate electrical limit for this pin. |
| 2 | VOUT | power_out | Regulated output pin; the datasheet limits Vout pin current to 450 mA absolute maximum and Vout pin voltage to Vss-0.3 V to Vout+0.3 V. |
| 3 | VDD | power_in | Chip supply and input-voltage pin; the absolute maximum Vin is 6 V and the typical application shows an input of 1.6 V to 5.5 V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Slkor SLKORMICRO Elec |
| Package | SOT-23-3 |
| Category | Power Management (PMIC) |
| Pins | 3 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Output voltage (VOUT(E) multiplier, min) | VOUT(E) | 0.98 | 1.02 | x VOUT(T) | IOUT=40mA, VIN=VOUT(T)+1V; printed as X 0.98 / X 1.02 of nominal VOUT(T) | 5 | |
| Load regulation | ΔVOUT | 50 | mV | VIN=VOUT+1V, 1mA≤IOUT≤100mA | 5 | ||
| Shutdown current | ICEL | 1 | μA | Vce=0V | 5 | ||
| Input voltage (absolute maximum) | VIN | 6 | V | 3 | |||
| Output current (absolute maximum) | Iout | 450 | mA | Vout pin current | 3 | ||
| Operating temperature | TOpr | -40 | 85 | ℃ | 3 | ||
| Storage temperature | Tstg | -55 | 125 | ℃ | 3 | ||
| Soldering temperature | Tsolder | 260 | ℃ | 10 s | 3 | ||
| Package power dissipation | Pd | 300 | mW | SOT-23-3L package | 3 | ||
| Input voltage (recommended) | VIN | 1.6 | 5.5 | V | Typical application circuit input range | 1 | |
| Input capacitor | Cin | 1 | 10 | uF | Typical application circuit | 1 | |
| Output capacitor | Cout | 1 | 10 | uF | Typical application circuit | 1 | |
| Maximum output current | IOUTmax | 300 | mA | VIN=VOUT+1V | 5 | ||
| Dropout voltage at 100 mA | Vdif1 | 90 | mV | IOUT=100mA | 5 | ||
| Dropout voltage at 200 mA | Vdif2 | 230 | mV | IOUT=200mA | 5 | ||
| Quiescent current | ISS | 70 | μA | VIN=VOUT+1V | 5 | ||
| Output noise voltage | en | 50 | uVrms | IOUT=40mA, 300Hz~50kHz | 5 | ||
| Power supply rejection ratio | PSRR | 70 | dB | IOUT=40mA, f=1kHz, +1Vp-p AC, VIN=VOUT+1V | 5 | ||
| Line regulation | ΔVOUT/(ΔVIN·VOUT) | 0.05 | %/V | VOUT+1V≤VIN≤8V, IOUT=40mA | 5 |
CAD (KiCad official)
- Symbol:
SL6206-25NR - Footprint:
Package_TO_SOT_SMD:SOT-23-3 - 3D model: SOT-23-3 (KiCad packages3D, STEP)
- 3D model files:
sl6206-25nr-etched.step/sl6206-25nr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);sl6206-25nr.step/sl6206-25nr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Slkor SLKORMICRO Elec datasheet (5 pp, sha256
e3e9d0574da6e16b, retrieved 2026-10-18, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).