3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownSL4949S
Slkor(SLKORMICRO Elec.) · Linear Voltage Regulators (LDO) · ESOP-8
SL4949S from Slkor(SLKORMICRO Elec.), in a ESOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | Vin | power_in | Supply input with an operating range of 5.5V to 42V and transient input voltage up to 42V. |
| 2 | Sense | input | Voltage monitor input with Sense threshold VSOth of 1.16V to 1.35V (typ. 1.23V). |
| 3 | Vz | power_out | Internal 5V preregulator output with drive capability limited to 100uA, so it should not be used as an output; a 100nF to 1.0uF capacitor to GND is recommended when Vin is below 8V. |
| 4 | CT | passive | Reset delay setting pin where the external CT sets the reset delay tResD (55ms to 180ms, typ. 100ms, at CT=100nF). |
| 5 | GND | power_in | Ground reference pin; the exposed pad is internally connected to GND. |
| 6 | Reset | output | Reset output with low level of at most 0.4V (RReset=10kΩ, VCC≥3.0V) and reset threshold of Vout-0.7V. |
| 7 | So | output | Sense monitor output with low level of at most 0.4V (RSO=10kΩ to Vout, VCC≥3.0V, VSI≤1.16V). |
| 8 | Vout | power_out | Regulated 5V output, 4.95V to 5.05V at Iout=1.0mA, with current limit of 100mA to 330mA. |
| 9 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Slkor(SLKORMICRO Elec.) |
| Package | ESOP-8 |
| Category | Power Management |
| Pins | 9 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Output voltage | VOUT | 4.95 | 5 | 5.05 | V | Iout=1.0mA | 5 |
| Output voltage | VOUT | 4.9 | 5 | 5.1 | V | 6.0V<VCC<28V, 1.0mA<Iout<50mA | 5 |
| Output current limit | IOUT | 100 | 330 | mA | 5 | ||
| Dropout voltage | Vdrop | 0.1 | 0.25 | V | Iout=10mA | 5 | |
| Dropout voltage | Vdrop | 0.2 | 0.4 | V | Iout=50mA | 5 | |
| Dropout voltage | Vdrop | 0.3 | 0.5 | V | Iout=100mA | 5 | |
| Input voltage regulation | Regline | 1 | 20 | mV | 6.0V<VCC<28V, Iout=1.0mA | 5 | |
| Load regulation | Regload | 8 | 30 | mV | 1.0mA<Iout<100mA | 5 | |
| Current limit | ILim | 105 | 330 | mA | Vout=4.5V | 5 | |
| Quiescent current (standby) | IQSE | 80 | 100 | uA | Iout=0.3mA, TJ<100℃ | 5 | |
| Quiescent current | IQ | 350 | 400 | uA | Iout=100mA | 5 | |
| Reset threshold hysteresis | VResth,hys | 50 | 100 | 200 | mV | TJ=25℃ | 5 |
| Reset threshold hysteresis | VResth,hys | 50 | 300 | mV | TJ=-40 to 150℃ | 5 | |
| Reset delay | tResD | 55 | 100 | 180 | ms | CT=100nF, tR≥100us | 5 |
| Reset response time | tResR | 5 | 30 | us | CT=100nF | 5 | |
| Reset output low voltage | tResL | 0.4 | V | RReset=10kΩ, VCC≥3.0V | 5 | ||
| Reset leakage current | tResH | 1 | uA | VReset=5.0V | 5 | ||
| Sense threshold | VSOth | 1.16 | 1.23 | 1.35 | V | VSI=1.5V~1.0V | 6 |
| Sense threshold hysteresis | VSOth,hys | 20 | 100 | 200 | mV | 6 | |
| Sense output low voltage | VSOL | 0.4 | V | VSI≤1.16V, VCC≥3.0V, RSO=10kΩ to Vout | 6 | ||
| Sense output leakage current | ISOH | 1 | uA | VSO=5.0V | 6 | ||
| Sense input current | ISI | -1 | 0.1 | 1 | uA | 6 | |
| Supply voltage | VCC | 42 | V | 4 | |||
| Output current | Iout | 330 | mA | 内部限流 | 4 | ||
| Output voltage | Vout | 4.95 | 5 | 5.05 | V | 4 | |
| Sense input current | ISI | -1 | 1 | mA | 4 | ||
| Internal preregulator output voltage | VZ | 5 | V | 4 | |||
| Internal preregulator output current | IZ | 5 | mA | 4 | |||
| Maximum junction temperature | Tj | 150 | ℃ | 4 | |||
| Storage temperature | Tstg | -40 | 150 | ℃ | 4 | ||
| Thermal resistance junction-to-solder/case | RthJS | 50 | 90 | K/W | SL4949S | 4 | |
| Operating supply voltage range | VCC | 5.5 | 42 | V | Operating voltage range as stated in feature list | 1 |
CAD (KiCad official)
- Symbol:
SL4949S - Footprint:
Package_SO:SOIC-8-1EP_3.9x4.9mm_P1.27mm_EP2.41x3.3mm - 3D model: ESOP-8 (KiCad packages3D, STEP)
- 3D model files:
sl4949s-etched.step/sl4949s-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);sl4949s.step/sl4949s.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Slkor(SLKORMICRO Elec.) datasheet (14 pp, sha256
c667939aa0f4e901, retrieved 2026-11-05, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).