Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

SL42764

Slkor SLKORMICRO Elec · Voltage Regulators - Linear, Low Drop Out (LDO) Regulators · TO-252-5

SL42764 from Slkor SLKORMICRO Elec, in a TO-252-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 I power_in Input supply pin (VI). Operating range 5 V to 42 V (absolute max ±42 V). Bypass with a ceramic capacitor placed close to the IC and returned directly to GND.
2 EN input Enable input, active high. VEN.H ≥ 3.5 V turns the regulator on; VEN.L ≤ 0.5 V shuts it down (shutdown current < 10 µA). Internal pull-down current 0.1-3 µA at VEN=5 V; no external pull-up required.
3 GND power_in Ground. Internally connected to the exposed heat-sink tab; the tab should be soldered to the PCB ground/heat-spreader plane.
4 VA input Voltage adjust (feedback) input for the ADJ version. Connect to the R1/R2 divider from Q to set VQ = ((R1+R2)/R2)·Vref, with Vref=2.5 V. For the fixed-voltage version this pin is n.c. (leave open or tie to GND).
5 Q power_out Regulated output. Adjustable 2.5 V-20 V, up to 400 mA (typ 500 mV dropout at 250 mA). Requires an output capacitor CQ ≥ 22 µF with ESR ≤ 3 Ω to ground for loop stability.
6 GND power_in Package tab (pad 6). printed: the tab is labelled GND (图3-2); 散热基座 内部连接到芯片地.

Key specifications

Parameter Value
Manufacturer Slkor SLKORMICRO Elec
Package TO-252-5
Category PMIC
Pins 6

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Output voltage VQ VQ 4.9 5 5.1 V 5mA<IQ<200mA; 6V<VI<28V 5
Output voltage accuracy VQ -2 2 % 5mA<IQ<200mA; 5V<VI<40V 5
Dropout voltage Vdr 200 500 mV IQ = 250mA; Vdr=VI-VQ 5
Load regulation ΔVQLO 60 100 mV IQ=5mA to 400mA; VI=6V 5
Line regulation ΔVQLi 15 40 mV 12V<VI<32V; IQ = 5mA 5
Off-state current IQ 10 15 uA VEN=0V; Tj≤100°C 5
Quiescent current IQ 100 120 uA IQ=1mA; VEN=5V 5
Enable input high voltage VEN.H 3.5 V VQ≥4.9V 7
Enable input low voltage VEN.L 0.5 V VQ≤0.1V 7
Internal pull-down current IEN.H 0.1 1 3 uA VEN=5V 7
Input voltage VI (absolute maximum) VI -42 42 V 3
Enable voltage (absolute maximum) VEN -42 42 V 3
Junction temperature (absolute maximum) Tj -40 150 ℃ 结温 3
Storage temperature Tstg -40 150 ℃ 3
Thermal resistance junction-ambient Rthj-a 50 90 K/W 仅管脚 3
ESD HBM VESD-HBM -2000 2000 V 人体模型, JESD22-A114 3
ESD CDM VESD-CDM -1000 1000 V 充电设备模型, JESD22-C101E 3
Input voltage VI (operating range) VI 5 42 V SL42764 ADJ 4
Output capacitor CQ CQ 22 uF 4
Output capacitor ESR ESR(CQ) 3 Ω 4
Junction temperature (operating range) Tj -40 150 ℃ 4

CAD (KiCad official)

  • Symbol: SL42764
  • Footprint: Package_TO_SOT_SMD:TO-252-5_TabPin6
  • 3D model: TO-252-5 (KiCad packages3D, STEP)
  • 3D model files: sl42764-etched.step / sl42764-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); sl42764.step / sl42764.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Slkor SLKORMICRO Elec datasheet (11 pp, sha256 5fc7043d17b1a6a4, retrieved 2026-11-17, tier: manufacturer)
  • Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
  • Extractor: ds2sf (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF