main
History Download
Ray Publish 0.2.0 9216fe8

SL4275

Slkor SLKORMICRO Elec · Voltage Regulators - Linear, Low Drop Out (LDO) Regulators · TO-252-5

SL4275 from Slkor SLKORMICRO Elec, in a TO-252-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 I power_in Regulator input supply. Operating range 5.5V to 55V (absolute max 60V). Bypass with a ceramic capacitor placed close to the IC pin to ground.
2 RQ input Open-drain reset output. Pulled low when VQ falls below the reset threshold VRT (typ 4.65V). Requires an external pull-up resistor (Rext >= 5kΩ); VOL <= 0.4V. Absolute max 36V. May be left floating if unused.
3 GND power_in Ground reference. Internally connected to the exposed heat-sink tab (die pad).
4 D input Reset delay timing pin. Connect a capacitor to GND to set the reset delay (trd = CD * 1.8V / 6uA; e.g. 47nF ≈ 15ms). Charge current ≈ 6uA typ, upper trip VDT ≈ 1.8V. Absolute max 12V. May be left floating (default delay ~8us).
5 Q power_out Regulated 5.0V output (±2%, 4.9V-5.1V). Supplies up to 450mA (current limit typ 800mA). Requires an output capacitor CQ >= 22uF with ESR <= 5Ω @ 10kHz for loop stability. Absolute max 12V.
6 GND power_in Package tab (pad 6). printed: the tab is labelled GND (图3-1); pin 3 GND 内部连接到散热片.

Key specifications

Parameter Value
Manufacturer Slkor SLKORMICRO Elec
Package TO-252-5
Category PMIC
Pins 6

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Input voltage VI -0.3 60 V Voltages relative to GND 3
Output voltage VQ -0.3 12 V Voltages relative to GND 3
Reset output voltage RQ -0.3 36 V Voltages relative to GND 3
Reset delay voltage D -0.3 12 V Voltages relative to GND 3
Junction temperature Tj -40 150 ℃ 3
Storage temperature Tstg -40 150 ℃ 3
ESD human body model VESD-HBM -2000 2000 V JESD22-A114 human body model 3
ESD charged device model VESD-CDM -1000 1000 V JESD22-C101E charged device model 3
Operating voltage VI 5.5 13.5 55 V 5
Output voltage VQ 4.9 5 5.1 V IQ<450m;VI<55V 5
Output current limit IQ 450 800 mA VI=13.5V 5
Quiescent current Iq1 80 100 uA IQ = 5mA 5
Quiescent current Iq2 130 160 uA IQ = 400mA 5
Dropout voltage Vdr 0.3 0.5 V IQ = 300mA 5
Load regulation ΔVQLo 33 50 mV 5mA<IQ<450mA 5
Line regulation ΔVQLi 2 10 mV 8V<VI<55V,IQ=5mA 5
Reset threshold VRT 4.5 4.65 4.8 V Output voltage falling 5
Reset delay lower trigger threshold VDL 0.2 0.4 0.6 V 5
Reset delay charging current ICharge 3 6 9 uA VD=0V 5
Reset delay time trd 10 15 20 ms CD=47nF 5
Reset output leakage current IRQ 0 1 uA VRQ=5V 5
Reset output low voltage VRQL 0.4 V Rext≥5KΩ ; VQ<VRT 5
Output capacitance CQ 1 uF ESR≤5Ω@10KHZ 5
Output capacitance (recommended) CQ 22 uF ESR≤5Ω at 10kHz, over operating temperature range 1
Power supply rejection ratio PSRR 70 dB [email protected] 5
Reset hysteresis Vhys 0.2 V 5
Reset response time trr 2 us 5
Reset delay upper trigger threshold VDT 1.8 V 5
Reset delay time without capacitor trd 8 us Pin without capacitor 5
Junction-to-case thermal resistance RthJC 3.6 K/W Measured at heat-sink base 4
Junction-to-ambient thermal resistance RthJA 27 K/W 4
Junction-to-ambient thermal resistance RthJA 115 K/W Pins only 4
Junction-to-ambient thermal resistance RthJA 52 K/W 300 mm2 heat sink 4
Junction-to-ambient thermal resistance RthJA 42 K/W 600 mm2 heat sink 4

CAD (KiCad official)

  • Symbol: SL4275
  • Footprint: Package_TO_SOT_SMD:TO-252-5_TabPin6
  • 3D model: TO-252-5 (KiCad packages3D, STEP)
  • 3D model files: sl4275-etched.step / sl4275-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); sl4275.step / sl4275.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Slkor SLKORMICRO Elec datasheet (10 pp, sha256 6adfe1024a6646d0, retrieved 2026-11-17, tier: manufacturer)
  • Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
  • Extractor: ds2sf (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF