SL3763

{
  "slug": "sl3763",
  "version": "0.1.0",
  "type": "component",
  "description": "Slkor(SLKORMICRO Elec.) Battery Management, SSOP-10. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "power management (pmic)",
    "sl3763",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "sl3763.kicad_sym",
    "sl3763.kicad_mod",
    "sl3763.glb",
    "sl3763.step",
    "sl3763.lbr",
    "docs/hero.png",
    "docs/sl3763-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "sl3763-hero.glb",
    "sl3763-hero.overlay.json",
    "sl3763-etched.glb"
  ],
  "component": {
    "mpn": "SL3763",
    "manufacturer": "Slkor(SLKORMICRO Elec.)",
    "package": "SSOP-10",
    "pin_count": 10,
    "category": "Power Management (PMIC)",
    "subcategory": "Battery Management",
    "datasheet": "https://datasheet.lcsc.com/datasheet/pdf/f08d75dfc8444356f7a955b8712168df.pdf",
    "parts": {
      "symbol": "sl3763.kicad_sym",
      "footprint": "sl3763.kicad_mod",
      "model_3d": "sl3763-hero.glb",
      "model_3d_plain": "sl3763-etched.glb",
      "model_3d_step": "sl3763-etched.step",
      "model_3d_step_plain": "sl3763.step",
      "lbr": "sl3763.lbr"
    },
    "distributor_links": {
      "lcsc": "C5122525"
    },
    "distributor_check": {
      "checked_at": "2026-11-05T10:30:18Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": null,
        "status": "no match"
      },
      "mouser": {
        "pn": null,
        "status": "no match"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "VG",
        "type": "power_out",
        "description": "Internal voltage modulator output that powers the internal drive circuitry, requiring a 100nF capacitor between VG and VCC; VG-to-VCC voltage is limited to -8V to VCC+0.3V."
      },
      {
        "number": "2",
        "name": "GND",
        "type": "power_in",
        "description": "Ground, serving as the negative input of the input supply and the battery negative terminal; all voltages are referenced to GND with a maximum rating of 33V for VCC, VG, DRV, CHRG and DONE."
      },
      {
        "number": "3",
        "name": "CHRG",
        "type": "output",
        "description": "Open-drain charge status output that is pulled low by an internal transistor during charging and is high-impedance otherwise, rated up to 33V."
      },
      {
        "number": "4",
        "name": "DONE",
        "type": "output",
        "description": "Open-drain charge-complete status output that is pulled low by an internal transistor in the charge-complete state and is high-impedance otherwise, rated up to 33V."
      },
      {
        "number": "5",
        "name": "COM",
        "type": "passive",
        "description": "Loop compensation input, requiring a 120Ω resistor in series with a 220nF capacitor from COM to GND; COM-to-GND voltage is limited to -0.3V to 6.5V."
      },
      {
        "number": "6",
        "name": "FB",
        "type": "input",
        "description": "Battery voltage sense input that senses the battery positive terminal; a resistor between FB and BAT raises the constant-voltage charge level, with FB-to-GND limited to -0.3V to 25V."
      },
      {
        "number": "7",
        "name": "BAT",
        "type": "bidirectional",
        "description": "Battery positive connection and negative input of the charge-current sense, measuring the voltage across RCS together with CSP; BAT-to-GND voltage is limited to -0.3V to 25V."
      },
      {
        "number": "8",
        "name": "CSP",
        "type": "input",
        "description": "Positive input of the charge-current sense, measuring the voltage across the sense resistor RCS together with BAT; CSP-to-GND voltage is limited to -0.3V to 25V."
      },
      {
        "number": "9",
        "name": "VCC",
        "type": "power_in",
        "description": "External supply positive input that also powers the internal circuits, requiring a filter capacitor to GND; operating input range is 6.6V to 30V."
      },
      {
        "number": "10",
        "name": "DRV",
        "type": "output",
        "description": "Gate drive output that drives the external P-channel MOSFET gate, clamped so that its low level is at most 8V below VCC."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [],
        "pages_sent": 11,
        "cost_usd": 0.05,
        "at": "2026-11-05T10:30:10"
      },
      "datasheet": {
        "url": "https://datasheet.lcsc.com/datasheet/pdf/f08d75dfc8444356f7a955b8712168df.pdf",
        "pages": 11,
        "sha256": "74e4d2c0f9949642",
        "source_tier": "lcsc"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 10,
        "described": 10,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "sl3763.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6.1,
          4.9,
          1.1
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "67b52412e9c230c40c0bdcb2098b238633f27dfc65692a16abf3448995fbe697",
        "checked": "2026-11-05",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "sl3763-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6.1,
          4.9,
          1.1
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "5050dfef700503f58d0fb5556eb93aa477c447156afa91ce7f15832ac96608f0",
        "checked": "2026-11-05",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  }
}