main
Ray Publish 0.1.0 c720751
{
  "slug": "sl24c08d",
  "version": "0.1.0",
  "type": "component",
  "description": "Slkor(SLKORMICRO Elec.) EEPROM, SOP-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "memory",
    "sl24c08d",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "sl24c08d.kicad_sym",
    "sl24c08d.kicad_mod",
    "sl24c08d.glb",
    "sl24c08d.step",
    "sl24c08d.lbr",
    "docs/hero.png",
    "docs/sl24c08d-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "sl24c08d-hero.glb",
    "sl24c08d-hero.overlay.json",
    "sl24c08d-etched.glb"
  ],
  "component": {
    "mpn": "SL24C08D",
    "manufacturer": "Slkor(SLKORMICRO Elec.)",
    "package": "SOP-8",
    "pin_count": 8,
    "category": "Memory",
    "subcategory": "EEPROM",
    "datasheet": "https://datasheet.lcsc.com/datasheet/pdf/5900e08c45f80826789cb349534cc932.pdf",
    "parts": {
      "symbol": "sl24c08d.kicad_sym",
      "footprint": "sl24c08d.kicad_mod",
      "model_3d": "sl24c08d-hero.glb",
      "model_3d_plain": "sl24c08d-etched.glb",
      "model_3d_step": "sl24c08d-etched.step",
      "model_3d_step_plain": "sl24c08d.step",
      "lbr": "sl24c08d.lbr"
    },
    "distributor_links": {
      "lcsc": "C5155393"
    },
    "distributor_check": {
      "checked_at": "2026-10-27T07:28:54Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": null,
        "status": "quota"
      },
      "mouser": {
        "pn": null,
        "status": "quota"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "NC",
        "type": "unconnected",
        "description": "No connect on the SL24C08; the unused A0 address position, which the datasheet says may be left empty or grounded."
      },
      {
        "number": "2",
        "name": "NC",
        "type": "unconnected",
        "description": "No connect on the SL24C08; the unused A1 address position, which the datasheet says may be left empty or grounded."
      },
      {
        "number": "3",
        "name": "A2",
        "type": "input",
        "description": "Device address input, the only hardware address pin on the SL24C08, which must match the hardware level and lets 2 devices share the bus."
      },
      {
        "number": "4",
        "name": "GND",
        "type": "power_in",
        "description": "Ground reference for the supply."
      },
      {
        "number": "5",
        "name": "SDA",
        "type": "bidirectional",
        "description": "Serial data input/output of the I2C bus, which must be pulled up to the supply through a resistor (10kΩ in the typical circuit)."
      },
      {
        "number": "6",
        "name": "SCL",
        "type": "input",
        "description": "Serial clock input of the I2C bus, supporting 1 MHz at 5V and 400 kHz at 1.8V to 2.7V."
      },
      {
        "number": "7",
        "name": "WP",
        "type": "input",
        "description": "Write-protect input, shown in the typical circuit connected to GND or VCC to disable or enable write protection."
      },
      {
        "number": "8",
        "name": "VCC",
        "type": "power_in",
        "description": "Supply voltage, 1.8V to 5.5V recommended operating range (absolute maximum -0.3 to +6.5V)."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-sonnet-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: The pin-diagram text is garbled and several parts are drawn on one page. The SL24C08 assignment was ; The WP function is not described in the extracted text. The description is based only on the typical",
          "2/8 pins cited to the wrong page (name found elsewhere): ['1:NC@p5', '2:NC@p5']"
        ],
        "pages_sent": 14,
        "cost_usd": 0.1466,
        "at": "2026-10-27T07:28:44"
      },
      "datasheet": {
        "url": "https://datasheet.lcsc.com/datasheet/pdf/5900e08c45f80826789cb349534cc932.pdf",
        "pages": 14,
        "sha256": "92c53c93c0c3a9eb",
        "source_tier": "lcsc"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 8,
        "described": 8,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "sl24c08d.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6.0,
          4.9,
          1.75
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "07f46cff378d30e6c27dfd5a03092c795323f86d91c71fc7e743f4f418dc553a",
        "checked": "2026-10-27",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "sl24c08d-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6.0,
          4.9,
          1.75
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "93f8b07a827389554a9ae686625b44127642695bfd9ef8fb075c47ab8dd86e0d",
        "checked": "2026-10-27",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  }
}