main
Ray
Publish 0.1.0
c720751
SL24C08D
Slkor(SLKORMICRO Elec.) · EEPROM · SOP-8
SL24C08D from Slkor(SLKORMICRO Elec.), in a SOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | NC | unconnected | No connect on the SL24C08; the unused A0 address position, which the datasheet says may be left empty or grounded. |
| 2 | NC | unconnected | No connect on the SL24C08; the unused A1 address position, which the datasheet says may be left empty or grounded. |
| 3 | A2 | input | Device address input, the only hardware address pin on the SL24C08, which must match the hardware level and lets 2 devices share the bus. |
| 4 | GND | power_in | Ground reference for the supply. |
| 5 | SDA | bidirectional | Serial data input/output of the I2C bus, which must be pulled up to the supply through a resistor (10kΩ in the typical circuit). |
| 6 | SCL | input | Serial clock input of the I2C bus, supporting 1 MHz at 5V and 400 kHz at 1.8V to 2.7V. |
| 7 | WP | input | Write-protect input, shown in the typical circuit connected to GND or VCC to disable or enable write protection. |
| 8 | VCC | power_in | Supply voltage, 1.8V to 5.5V recommended operating range (absolute maximum -0.3 to +6.5V). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Slkor(SLKORMICRO Elec.) |
| Package | SOP-8 |
| Category | Memory |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage | VCC | 1.8 | 5.5 | V | 2 | ||
| Operating temperature | TA | -40 | 85 | °C | 2 | ||
| Storage temperature | TSTG | -65 | 150 | °C | 2 | ||
| ESD voltage (human body model) | VESD | 2500 | V | Human body model | 2 | ||
| ESD voltage (machine model) | VESD | 200 | V | Machine model | 2 | ||
| Input low voltage | VIL | -0.6 | 0.3 | V | max = VCC×0.3 | 3 | |
| Input high voltage | VIH | 0.7 | 0.5 | V | min = VCC×0.7, max = VCC+0.5 | 3 | |
| Clock frequency SCL | fSCL | 400 | kHz | VCC=1.8V | 3 | ||
| Clock frequency SCL | fSCL | 1000 | kHz | VCC=5V | 3 | ||
| Write cycle time | tWR | 5 | ms | 1 |
CAD (KiCad official)
- Symbol:
SL24C08D - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOP-8 (KiCad packages3D, STEP)
- 3D model files:
sl24c08d-etched.step/sl24c08d-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);sl24c08d.step/sl24c08d.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Slkor(SLKORMICRO Elec.) datasheet (14 pp, sha256
92c53c93c0c3a9eb, retrieved 2026-10-27, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# SL24C08D
**Slkor(SLKORMICRO Elec.)** · EEPROM · SOP-8
SL24C08D from Slkor(SLKORMICRO Elec.), in a SOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | NC | unconnected | No connect on the SL24C08; the unused A0 address position, which the datasheet says may be left empty or grounded. |
| 2 | NC | unconnected | No connect on the SL24C08; the unused A1 address position, which the datasheet says may be left empty or grounded. |
| 3 | A2 | input | Device address input, the only hardware address pin on the SL24C08, which must match the hardware level and lets 2 devices share the bus. |
| 4 | GND | power_in | Ground reference for the supply. |
| 5 | SDA | bidirectional | Serial data input/output of the I2C bus, which must be pulled up to the supply through a resistor (10kΩ in the typical circuit). |
| 6 | SCL | input | Serial clock input of the I2C bus, supporting 1 MHz at 5V and 400 kHz at 1.8V to 2.7V. |
| 7 | WP | input | Write-protect input, shown in the typical circuit connected to GND or VCC to disable or enable write protection. |
| 8 | VCC | power_in | Supply voltage, 1.8V to 5.5V recommended operating range (absolute maximum -0.3 to +6.5V). |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Slkor(SLKORMICRO Elec.) |
| Package | SOP-8 |
| Category | Memory |
| Pins | 8 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage | VCC | 1.8 | | 5.5 | V | | 2 |
| Operating temperature | TA | -40 | | 85 | °C | | 2 |
| Storage temperature | TSTG | -65 | | 150 | °C | | 2 |
| ESD voltage (human body model) | VESD | | | 2500 | V | Human body model | 2 |
| ESD voltage (machine model) | VESD | | | 200 | V | Machine model | 2 |
| Input low voltage | VIL | -0.6 | | 0.3 | V | max = VCC×0.3 | 3 |
| Input high voltage | VIH | 0.7 | | 0.5 | V | min = VCC×0.7, max = VCC+0.5 | 3 |
| Clock frequency SCL | fSCL | | | 400 | kHz | VCC=1.8V | 3 |
| Clock frequency SCL | fSCL | | | 1000 | kHz | VCC=5V | 3 |
| Write cycle time | tWR | | | 5 | ms | | 1 |
## CAD (KiCad official)
- Symbol: `SL24C08D`
- Footprint: `Package_SO:SOIC-8_3.9x4.9mm_P1.27mm`
- 3D model: SOP-8 (KiCad packages3D, STEP)
- 3D model files: `sl24c08d-etched.step` / `sl24c08d-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `sl24c08d.step` / `sl24c08d.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Slkor(SLKORMICRO Elec.) datasheet](docs/sl24c08d-datasheet.pdf) (14 pp, sha256 `92c53c93c0c3a9eb`, retrieved 2026-10-27, tier: lcsc)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-sonnet-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/sl24c08d-datasheet.pdf)