component
SL1719SH
Public Made by Adomby adom
Slkor SLKORMICRO Elec Hall Switches, TO-92S. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownSL1719SH
Slkor SLKORMICRO Elec · Hall Switches · TO-92S
SL1719SH from Slkor SLKORMICRO Elec, in a TO-92S. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VDD | power_in | Supply input, operating range 1.8 V to 5.5 V; absolute maximum supply voltage is 6 V and a 1 µF capacitor should be placed between VDD and GND, close to the VDD pin, to filter supply noise. |
| 2 | GND | power_in | Ground pin for the device; a 1 µF decoupling capacitor is connected between VDD and this ground pin. |
| 3 | OUTPUT | output | CMOS push-pull output that goes low when the applied S-pole field exceeds BOP and stays low until the field falls below BRP; output drive current is limited to 5 mA absolute maximum. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Slkor SLKORMICRO Elec |
| Package | TO-92S |
| Category | Magnetic Sensors |
| Pins | 3 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage (electrical, working state) | VDD | 1.8 | 5.5 | V | 工作状态 | 6 | |
| Output low voltage | VOL | 0.05 | 0.15 | V | IOUT=1mA | 6 | |
| Output high voltage | VOH | -0.15 | -0.1 | V | IOUT=1mA; printed as VDD-0.15 (min) and VDD-0.1 (typ), i.e. relative to VDD | 6 | |
| Magnetic operate point | BOPS | 40 | 50 | 60 | Gauss | TA=+25℃, VDD=1.8V | 7 |
| Magnetic release point | BRPS | 25 | 35 | 45 | Gauss | TA=+25℃, VDD=1.8V | 7 |
| Supply voltage (absolute maximum) | VDD | 6 | V | 5 | |||
| Reverse supply voltage (absolute maximum) | VDD_REV | -0.3 | V | 5 | |||
| Output drive current (absolute maximum) | IOUTPUT | 5 | mA | 5 | |||
| Storage temperature range (absolute maximum) | TSTG | -50 | 150 | oC | 5 | ||
| Junction temperature (absolute maximum) | TJ | 150 | oC | 5 | |||
| ESD HBM (absolute maximum) | ESD HBM | 8000 | V | Human body model | 5 | ||
| Supply voltage (recommended operating) | VDD | 1.8 | 5.5 | V | 芯片工作 | 5 | |
| Operating temperature range (recommended operating) | TA | -40 | 85 | oC | 芯片工作 | 5 | |
| Average supply current | IDD(AVG) | 0.9 | μA | TA=+25℃, VDD=1.8V | 6 | ||
| Awake state supply current | IDD(Awake) | 2 | mA | TA=+25℃, VDD=1.8V | 6 | ||
| Sleep state supply current | IDD(Sleep) | 0.4 | μA | TA=+25℃, VDD=1.8V | 6 | ||
| Wake-up time | TAWAKE | 10 | μs | 工作状态 | 6 | ||
| Period | TPERIOD | 40 | ms | 工作状态 | 6 | ||
| Magnetic hysteresis | BHY | 15 | Gauss | /BOPS/-/BRPS/ | 7 |
CAD (KiCad official)
- Symbol:
SL1719SH - Footprint:
Package_TO_SOT_THT:TO-92_Inline - 3D model: TO-92S (KiCad packages3D, STEP)
- 3D model files:
sl1719sh-etched.step/sl1719sh-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);sl1719sh.step/sl1719sh.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Slkor SLKORMICRO Elec datasheet (11 pp, sha256
defb746cc4e0dfcf, retrieved 2026-10-17, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).